sun50i-h5-nanopi-neo-plus2.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
    2 // Copyright (C) 2017 Antony Antony <antony@phenome.org>
    3 // Copyright (C) 2016 ARM Ltd.
    4 
    5 /dts-v1/;
    6 #include "sun50i-h5.dtsi"
    7 
    8 #include <dt-bindings/gpio/gpio.h>
    9 #include <dt-bindings/input/input.h>
   10 #include <dt-bindings/pinctrl/sun4i-a10.h>
   11 
   12 / {
   13         model = "FriendlyARM NanoPi NEO Plus2";
   14         compatible = "friendlyarm,nanopi-neo-plus2", "allwinner,sun50i-h5";
   15 
   16         aliases {
   17                 ethernet0 = &emac;
   18                 serial0 = &uart0;
   19         };
   20 
   21         chosen {
   22                 stdout-path = "serial0:115200n8";
   23         };
   24 
   25         leds {
   26                 compatible = "gpio-leds";
   27 
   28                 led-0 {
   29                         label = "nanopi:green:pwr";
   30                         gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
   31                         default-state = "on";
   32                 };
   33 
   34                 led-1 {
   35                         label = "nanopi:red:status";
   36                         gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
   37                 };
   38         };
   39 
   40         reg_gmac_3v3: gmac-3v3 {
   41                 compatible = "regulator-fixed";
   42                 regulator-name = "gmac-3v3";
   43                 regulator-min-microvolt = <3300000>;
   44                 regulator-max-microvolt = <3300000>;
   45                 startup-delay-us = <100000>;
   46                 enable-active-high;
   47                 gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
   48         };
   49 
   50         reg_vcc3v3: vcc3v3 {
   51                 compatible = "regulator-fixed";
   52                 regulator-name = "vcc3v3";
   53                 regulator-min-microvolt = <3300000>;
   54                 regulator-max-microvolt = <3300000>;
   55         };
   56 
   57         vdd_cpux: gpio-regulator {
   58                 compatible = "regulator-gpio";
   59                 regulator-name = "vdd-cpux";
   60                 regulator-type = "voltage";
   61                 regulator-boot-on;
   62                 regulator-always-on;
   63                 regulator-min-microvolt = <1100000>;
   64                 regulator-max-microvolt = <1300000>;
   65                 regulator-ramp-delay = <50>; /* 4ms */
   66                 gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
   67                 gpios-states = <0x1>;
   68                 states = <1100000 0>, <1300000 1>;
   69         };
   70 
   71         wifi_pwrseq: wifi_pwrseq {
   72                 compatible = "mmc-pwrseq-simple";
   73                 reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
   74                 post-power-on-delay-ms = <200>;
   75         };
   76 };
   77 
   78 &codec {
   79         allwinner,audio-routing =
   80                 "Line Out", "LINEOUT",
   81                 "MIC1", "Mic",
   82                 "Mic",  "MBIAS";
   83         status = "okay";
   84 };
   85 
   86 &ehci0 {
   87         status = "okay";
   88 };
   89 
   90 &ehci3 {
   91         status = "okay";
   92 };
   93 
   94 &emac {
   95         pinctrl-names = "default";
   96         pinctrl-0 = <&emac_rgmii_pins>;
   97         phy-supply = <&reg_gmac_3v3>;
   98         phy-handle = <&ext_rgmii_phy>;
   99         phy-mode = "rgmii-id";
  100         status = "okay";
  101 };
  102 
  103 &external_mdio {
  104         ext_rgmii_phy: ethernet-phy@7 {
  105                 compatible = "ethernet-phy-ieee802.3-c22";
  106                 reg = <7>;
  107         };
  108 };
  109 
  110 &mmc0 {
  111         vmmc-supply = <&reg_vcc3v3>;
  112         bus-width = <4>;
  113         cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
  114         status = "okay";
  115 };
  116 
  117 &mmc1 {
  118         vmmc-supply = <&reg_vcc3v3>;
  119         vqmmc-supply = <&reg_vcc3v3>;
  120         mmc-pwrseq = <&wifi_pwrseq>;
  121         bus-width = <4>;
  122         non-removable;
  123         status = "okay";
  124 
  125         brcmf: wifi@1 {
  126                 reg = <1>;
  127                 compatible = "brcm,bcm4329-fmac";
  128         };
  129 };
  130 
  131 &mmc2 {
  132         pinctrl-names = "default";
  133         pinctrl-0 = <&mmc2_8bit_pins>;
  134         vmmc-supply = <&reg_vcc3v3>;
  135         bus-width = <8>;
  136         non-removable;
  137         cap-mmc-hw-reset;
  138         status = "okay";
  139 };
  140 
  141 &ohci0 {
  142         status = "okay";
  143 };
  144 
  145 &ohci3 {
  146         status = "okay";
  147 };
  148 
  149 &uart0 {
  150         pinctrl-names = "default";
  151         pinctrl-0 = <&uart0_pa_pins>;
  152         status = "okay";
  153 };
  154 
  155 &usb_otg {
  156         dr_mode = "host";
  157         status = "okay";
  158 };
  159 
  160 &usbphy {
  161         /* USB Type-A ports' VBUS is always on */
  162         status = "okay";
  163 };

Cache object: 4eea7fc3e63e8b77244cf043af8bc1ad

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm64/allwinner/sun50i-h5-nanopi-neo-plus2.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/allwinner/sun50i-h5-nanopi-neo-plus2.dts