sun50i-h5-orangepi-pc2.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
    2 // Copyright (C) 2016 ARM Ltd.
    3 
    4 /dts-v1/;
    5 #include "sun50i-h5.dtsi"
    6 
    7 #include <dt-bindings/gpio/gpio.h>
    8 #include <dt-bindings/input/input.h>
    9 #include <dt-bindings/pinctrl/sun4i-a10.h>
   10 
   11 / {
   12         model = "Xunlong Orange Pi PC 2";
   13         compatible = "xunlong,orangepi-pc2", "allwinner,sun50i-h5";
   14 
   15         reg_vcc3v3: vcc3v3 {
   16                 compatible = "regulator-fixed";
   17                 regulator-name = "vcc3v3";
   18                 regulator-min-microvolt = <3300000>;
   19                 regulator-max-microvolt = <3300000>;
   20         };
   21 
   22         aliases {
   23                 ethernet0 = &emac;
   24                 serial0 = &uart0;
   25         };
   26 
   27         chosen {
   28                 stdout-path = "serial0:115200n8";
   29         };
   30 
   31         connector {
   32                 compatible = "hdmi-connector";
   33                 type = "a";
   34 
   35                 port {
   36                         hdmi_con_in: endpoint {
   37                                 remote-endpoint = <&hdmi_out_con>;
   38                         };
   39                 };
   40         };
   41 
   42         leds {
   43                 compatible = "gpio-leds";
   44 
   45                 led-0 {
   46                         label = "orangepi:green:pwr";
   47                         gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
   48                         default-state = "on";
   49                 };
   50 
   51                 led-1 {
   52                         label = "orangepi:red:status";
   53                         gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
   54                 };
   55         };
   56 
   57         gpio-keys {
   58                 compatible = "gpio-keys";
   59 
   60                 key-sw4 {
   61                         label = "sw4";
   62                         linux,code = <BTN_0>;
   63                         gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
   64                         wakeup-source;
   65                 };
   66         };
   67 
   68         reg_gmac_3v3: gmac-3v3 {
   69                 compatible = "regulator-fixed";
   70                 regulator-name = "gmac-3v3";
   71                 regulator-min-microvolt = <3300000>;
   72                 regulator-max-microvolt = <3300000>;
   73                 startup-delay-us = <100000>;
   74                 enable-active-high;
   75                 gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
   76         };
   77 
   78         reg_usb0_vbus: usb0-vbus {
   79                 compatible = "regulator-fixed";
   80                 regulator-name = "usb0-vbus";
   81                 regulator-min-microvolt = <5000000>;
   82                 regulator-max-microvolt = <5000000>;
   83                 enable-active-high;
   84                 gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
   85                 status = "okay";
   86         };
   87 };
   88 
   89 &codec {
   90         allwinner,audio-routing =
   91                 "Line Out", "LINEOUT",
   92                 "MIC1", "Mic",
   93                 "Mic",  "MBIAS";
   94         status = "okay";
   95 };
   96 
   97 &cpu0 {
   98         cpu-supply = <&reg_vdd_cpux>;
   99 };
  100 
  101 &de {
  102         status = "okay";
  103 };
  104 
  105 &ehci0 {
  106         status = "okay";
  107 };
  108 
  109 &ehci1 {
  110         status = "okay";
  111 };
  112 
  113 &ehci2 {
  114         status = "okay";
  115 };
  116 
  117 &ehci3 {
  118         status = "okay";
  119 };
  120 
  121 &emac {
  122         pinctrl-names = "default";
  123         pinctrl-0 = <&emac_rgmii_pins>;
  124         phy-supply = <&reg_gmac_3v3>;
  125         phy-handle = <&ext_rgmii_phy>;
  126         phy-mode = "rgmii-id";
  127         status = "okay";
  128 };
  129 
  130 &external_mdio {
  131         ext_rgmii_phy: ethernet-phy@1 {
  132                 compatible = "ethernet-phy-ieee802.3-c22";
  133                 reg = <1>;
  134         };
  135 };
  136 
  137 &hdmi {
  138         status = "okay";
  139 };
  140 
  141 &hdmi_out {
  142         hdmi_out_con: endpoint {
  143                 remote-endpoint = <&hdmi_con_in>;
  144         };
  145 };
  146 
  147 &ir {
  148         pinctrl-names = "default";
  149         pinctrl-0 = <&r_ir_rx_pin>;
  150         status = "okay";
  151 };
  152 
  153 &mmc0 {
  154         vmmc-supply = <&reg_vcc3v3>;
  155         bus-width = <4>;
  156         cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
  157         status = "okay";
  158 };
  159 
  160 &ohci0 {
  161         status = "okay";
  162 };
  163 
  164 &ohci1 {
  165         status = "okay";
  166 };
  167 
  168 &ohci2 {
  169         status = "okay";
  170 };
  171 
  172 &ohci3 {
  173         status = "okay";
  174 };
  175 
  176 &r_i2c {
  177         status = "okay";
  178 
  179         reg_vdd_cpux: regulator@65 {
  180                 compatible = "silergy,sy8106a";
  181                 reg = <0x65>;
  182                 regulator-name = "vdd-cpux";
  183                 silergy,fixed-microvolt = <1100000>;
  184                 regulator-min-microvolt = <1000000>;
  185                 regulator-max-microvolt = <1400000>;
  186                 regulator-ramp-delay = <200>;
  187                 regulator-boot-on;
  188                 regulator-always-on;
  189         };
  190 };
  191 
  192 &spi0  {
  193         status = "okay";
  194 
  195         flash@0 {
  196                 #address-cells = <1>;
  197                 #size-cells = <1>;
  198                 compatible = "jedec,spi-nor";
  199                 reg = <0>;
  200                 spi-max-frequency = <40000000>;
  201         };
  202 };
  203 
  204 &uart0 {
  205         pinctrl-names = "default";
  206         pinctrl-0 = <&uart0_pa_pins>;
  207         status = "okay";
  208 };
  209 
  210 &uart1 {
  211         pinctrl-names = "default";
  212         pinctrl-0 = <&uart1_pins>;
  213         status = "disabled";
  214 };
  215 
  216 &uart2 {
  217         pinctrl-names = "default";
  218         pinctrl-0 = <&uart2_pins>;
  219         status = "disabled";
  220 };
  221 
  222 &usb_otg {
  223         dr_mode = "otg";
  224         status = "okay";
  225 };
  226 
  227 &usbphy {
  228         /* USB Type-A ports' VBUS is always on */
  229         usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
  230         usb0_vbus-supply = <&reg_usb0_vbus>;
  231         status = "okay";
  232 };

Cache object: af9154d5575acd18dfdb509edeb5f713

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm64/allwinner/sun50i-h5-orangepi-pc2.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/allwinner/sun50i-h5-orangepi-pc2.dts