sun50i-h6-beelink-gs1.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
    2 // Copyright (C) 2019 Clément Péron <peron.clem@gmail.com>
    3 
    4 /dts-v1/;
    5 
    6 #include "sun50i-h6.dtsi"
    7 #include "sun50i-h6-cpu-opp.dtsi"
    8 
    9 #include <dt-bindings/gpio/gpio.h>
   10 
   11 / {
   12         model = "Beelink GS1";
   13         compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";
   14 
   15         aliases {
   16                 ethernet0 = &emac;
   17                 serial0 = &uart0;
   18         };
   19 
   20         chosen {
   21                 stdout-path = "serial0:115200n8";
   22         };
   23 
   24         connector {
   25                 compatible = "hdmi-connector";
   26                 type = "a";
   27                 ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
   28 
   29                 port {
   30                         hdmi_con_in: endpoint {
   31                                 remote-endpoint = <&hdmi_out_con>;
   32                         };
   33                 };
   34         };
   35 
   36         ext_osc32k: ext_osc32k_clk {
   37                 #clock-cells = <0>;
   38                 compatible = "fixed-clock";
   39                 clock-frequency = <32768>;
   40                 clock-output-names = "ext_osc32k";
   41         };
   42 
   43         leds {
   44                 compatible = "gpio-leds";
   45 
   46                 led {
   47                         label = "beelink:white:power";
   48                         gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
   49                         default-state = "on";
   50                 };
   51         };
   52 
   53         reg_vcc5v: vcc5v {
   54                 /* board wide 5V supply directly from the DC jack */
   55                 compatible = "regulator-fixed";
   56                 regulator-name = "vcc-5v";
   57                 regulator-min-microvolt = <5000000>;
   58                 regulator-max-microvolt = <5000000>;
   59                 regulator-always-on;
   60         };
   61 
   62         sound-spdif {
   63                 compatible = "simple-audio-card";
   64                 simple-audio-card,name = "sun50i-h6-spdif";
   65 
   66                 simple-audio-card,cpu {
   67                         sound-dai = <&spdif>;
   68                 };
   69 
   70                 simple-audio-card,codec {
   71                         sound-dai = <&spdif_out>;
   72                 };
   73         };
   74 
   75         spdif_out: spdif-out {
   76                 #sound-dai-cells = <0>;
   77                 compatible = "linux,spdif-dit";
   78         };
   79 };
   80 
   81 &cpu0 {
   82         cpu-supply = <&reg_dcdca>;
   83 };
   84 
   85 &de {
   86         status = "okay";
   87 };
   88 
   89 &dwc3 {
   90         status = "okay";
   91 };
   92 
   93 &ehci0 {
   94         status = "okay";
   95 };
   96 
   97 &emac {
   98         pinctrl-names = "default";
   99         pinctrl-0 = <&ext_rgmii_pins>;
  100         phy-mode = "rgmii-id";
  101         phy-handle = <&ext_rgmii_phy>;
  102         phy-supply = <&reg_aldo2>;
  103         status = "okay";
  104 };
  105 
  106 &gpu {
  107         mali-supply = <&reg_dcdcc>;
  108         status = "okay";
  109 };
  110 
  111 &hdmi {
  112         status = "okay";
  113 };
  114 
  115 &hdmi_out {
  116         hdmi_out_con: endpoint {
  117                 remote-endpoint = <&hdmi_con_in>;
  118         };
  119 };
  120 
  121 &mdio {
  122         ext_rgmii_phy: ethernet-phy@1 {
  123                 compatible = "ethernet-phy-ieee802.3-c22";
  124                 reg = <1>;
  125         };
  126 };
  127 
  128 &mmc0 {
  129         vmmc-supply = <&reg_cldo1>;
  130         cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
  131         bus-width = <4>;
  132         status = "okay";
  133 };
  134 
  135 &mmc2 {
  136         vmmc-supply = <&reg_cldo1>;
  137         vqmmc-supply = <&reg_bldo2>;
  138         non-removable;
  139         cap-mmc-hw-reset;
  140         bus-width = <8>;
  141         status = "okay";
  142 };
  143 
  144 &ohci0 {
  145         status = "okay";
  146 };
  147 
  148 &pio {
  149         vcc-pd-supply = <&reg_cldo1>;
  150         vcc-pg-supply = <&reg_aldo1>;
  151 };
  152 
  153 &r_ir {
  154         linux,rc-map-name = "rc-beelink-gs1";
  155         status = "okay";
  156 };
  157 
  158 &r_pio {
  159         /*
  160          * FIXME: We can't add that supply for now since it would
  161          * create a circular dependency between pinctrl, the regulator
  162          * and the RSB Bus.
  163          *
  164          * vcc-pl-supply = <&reg_aldo1>;
  165          */
  166         vcc-pm-supply = <&reg_aldo1>;
  167 };
  168 
  169 &r_rsb {
  170         status = "okay";
  171 
  172         axp805: pmic@745 {
  173                 compatible = "x-powers,axp805", "x-powers,axp806";
  174                 reg = <0x745>;
  175                 interrupt-parent = <&r_intc>;
  176                 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
  177                 interrupt-controller;
  178                 #interrupt-cells = <1>;
  179                 x-powers,self-working-mode;
  180                 vina-supply = <&reg_vcc5v>;
  181                 vinb-supply = <&reg_vcc5v>;
  182                 vinc-supply = <&reg_vcc5v>;
  183                 vind-supply = <&reg_vcc5v>;
  184                 vine-supply = <&reg_vcc5v>;
  185                 aldoin-supply = <&reg_vcc5v>;
  186                 bldoin-supply = <&reg_vcc5v>;
  187                 cldoin-supply = <&reg_vcc5v>;
  188 
  189                 regulators {
  190                         reg_aldo1: aldo1 {
  191                                 regulator-always-on;
  192                                 regulator-min-microvolt = <3300000>;
  193                                 regulator-max-microvolt = <3300000>;
  194                                 regulator-name = "vcc-pl";
  195                         };
  196 
  197                         reg_aldo2: aldo2 {
  198                                 regulator-min-microvolt = <3300000>;
  199                                 regulator-max-microvolt = <3300000>;
  200                                 regulator-name = "vcc-ac200";
  201                                 regulator-enable-ramp-delay = <100000>;
  202                         };
  203 
  204                         reg_aldo3: aldo3 {
  205                                 regulator-always-on;
  206                                 regulator-min-microvolt = <3300000>;
  207                                 regulator-max-microvolt = <3300000>;
  208                                 regulator-name = "vcc25-dram";
  209                         };
  210 
  211                         reg_bldo1: bldo1 {
  212                                 regulator-always-on;
  213                                 regulator-min-microvolt = <1800000>;
  214                                 regulator-max-microvolt = <1800000>;
  215                                 regulator-name = "vcc-bias-pll";
  216                         };
  217 
  218                         reg_bldo2: bldo2 {
  219                                 regulator-always-on;
  220                                 regulator-min-microvolt = <1800000>;
  221                                 regulator-max-microvolt = <1800000>;
  222                                 regulator-name = "vcc-efuse-pcie-hdmi-io";
  223                         };
  224 
  225                         reg_bldo3: bldo3 {
  226                                 regulator-always-on;
  227                                 regulator-min-microvolt = <1800000>;
  228                                 regulator-max-microvolt = <1800000>;
  229                                 regulator-name = "vcc-dcxoio";
  230                         };
  231 
  232                         bldo4 {
  233                                 /* unused */
  234                         };
  235 
  236                         reg_cldo1: cldo1 {
  237                                 regulator-always-on;
  238                                 regulator-min-microvolt = <3300000>;
  239                                 regulator-max-microvolt = <3300000>;
  240                                 regulator-name = "vcc-3v3";
  241                         };
  242 
  243                         reg_cldo2: cldo2 {
  244                                 regulator-min-microvolt = <3300000>;
  245                                 regulator-max-microvolt = <3300000>;
  246                                 regulator-name = "vcc-wifi-1";
  247                         };
  248 
  249                         reg_cldo3: cldo3 {
  250                                 regulator-min-microvolt = <3300000>;
  251                                 regulator-max-microvolt = <3300000>;
  252                                 regulator-name = "vcc-wifi-2";
  253                         };
  254 
  255                         reg_dcdca: dcdca {
  256                                 regulator-always-on;
  257                                 regulator-min-microvolt = <810000>;
  258                                 regulator-max-microvolt = <1160000>;
  259                                 regulator-ramp-delay = <2500>;
  260                                 regulator-name = "vdd-cpu";
  261                         };
  262 
  263                         reg_dcdcc: dcdcc {
  264                                 regulator-enable-ramp-delay = <32000>;
  265                                 regulator-min-microvolt = <810000>;
  266                                 regulator-max-microvolt = <1080000>;
  267                                 regulator-ramp-delay = <2500>;
  268                                 regulator-name = "vdd-gpu";
  269                         };
  270 
  271                         reg_dcdcd: dcdcd {
  272                                 regulator-always-on;
  273                                 regulator-min-microvolt = <960000>;
  274                                 regulator-max-microvolt = <960000>;
  275                                 regulator-name = "vdd-sys";
  276                         };
  277 
  278                         reg_dcdce: dcdce {
  279                                 regulator-always-on;
  280                                 regulator-min-microvolt = <1200000>;
  281                                 regulator-max-microvolt = <1200000>;
  282                                 regulator-name = "vcc-dram";
  283                         };
  284 
  285                         sw {
  286                                 /* unused */
  287                         };
  288                 };
  289         };
  290 };
  291 
  292 &spdif {
  293         status = "okay";
  294 };
  295 
  296 &uart0 {
  297         pinctrl-names = "default";
  298         pinctrl-0 = <&uart0_ph_pins>;
  299         status = "okay";
  300 };
  301 
  302 &usb2otg {
  303         dr_mode = "host";
  304         status = "okay";
  305 };
  306 
  307 &usb2phy {
  308         usb0_vbus-supply = <&reg_vcc5v>;
  309         status = "okay";
  310 };
  311 
  312 &usb3phy {
  313         status = "okay";
  314 };

Cache object: 28f885b0da59ae4629e2418a1323d310

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts