sun50i-h6-pine-h64.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
    1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
    2 // Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io>
    3 
    4 /dts-v1/;
    5 
    6 #include "sun50i-h6.dtsi"
    7 #include "sun50i-h6-cpu-opp.dtsi"
    8 
    9 #include <dt-bindings/gpio/gpio.h>
   10 
   11 / {
   12         model = "Pine H64 model A";
   13         compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
   14 
   15         aliases {
   16                 ethernet0 = &emac;
   17                 serial0 = &uart0;
   18                 spi0 = &spi0;
   19         };
   20 
   21         chosen {
   22                 stdout-path = "serial0:115200n8";
   23         };
   24 
   25         ext_osc32k: ext_osc32k_clk {
   26                 #clock-cells = <0>;
   27                 compatible = "fixed-clock";
   28                 clock-frequency = <32768>;
   29                 clock-output-names = "ext_osc32k";
   30         };
   31 
   32         hdmi_connector: connector {
   33                 compatible = "hdmi-connector";
   34                 type = "a";
   35                 ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
   36 
   37                 port {
   38                         hdmi_con_in: endpoint {
   39                                 remote-endpoint = <&hdmi_out_con>;
   40                         };
   41                 };
   42         };
   43 
   44         leds {
   45                 compatible = "gpio-leds";
   46 
   47                 led-0 {
   48                         label = "pine-h64:green:heartbeat";
   49                         gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
   50                 };
   51 
   52                 led-1 {
   53                         label = "pine-h64:white:link";
   54                         gpios = <&r_pio 0 3 GPIO_ACTIVE_HIGH>; /* PL3 */
   55                 };
   56 
   57                 led-2 {
   58                         label = "pine-h64:blue:status";
   59                         gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
   60                 };
   61         };
   62 
   63         reg_gmac_3v3: gmac-3v3 {
   64                 compatible = "regulator-fixed";
   65                 regulator-name = "vcc-gmac-3v3";
   66                 regulator-min-microvolt = <3300000>;
   67                 regulator-max-microvolt = <3300000>;
   68                 startup-delay-us = <100000>;
   69                 gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
   70                 enable-active-high;
   71         };
   72 
   73         reg_usb_vbus: vbus {
   74                 compatible = "regulator-fixed";
   75                 regulator-name = "usb-vbus";
   76                 regulator-min-microvolt = <5000000>;
   77                 regulator-max-microvolt = <5000000>;
   78                 startup-delay-us = <100000>;
   79                 gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>;
   80                 enable-active-high;
   81         };
   82 };
   83 
   84 &cpu0 {
   85         cpu-supply = <&reg_dcdca>;
   86 };
   87 
   88 &de {
   89         status = "okay";
   90 };
   91 
   92 &ehci0 {
   93         status = "okay";
   94 };
   95 
   96 &ehci3 {
   97         status = "okay";
   98 };
   99 
  100 &emac {
  101         pinctrl-names = "default";
  102         pinctrl-0 = <&ext_rgmii_pins>;
  103         phy-mode = "rgmii-id";
  104         phy-handle = <&ext_rgmii_phy>;
  105         phy-supply = <&reg_gmac_3v3>;
  106         allwinner,rx-delay-ps = <200>;
  107         allwinner,tx-delay-ps = <200>;
  108         status = "okay";
  109 };
  110 
  111 &gpu {
  112         mali-supply = <&reg_dcdcc>;
  113         status = "okay";
  114 };
  115 
  116 &hdmi {
  117         status = "okay";
  118 };
  119 
  120 &hdmi_out {
  121         hdmi_out_con: endpoint {
  122                 remote-endpoint = <&hdmi_con_in>;
  123         };
  124 };
  125 
  126 &mdio {
  127         ext_rgmii_phy: ethernet-phy@1 {
  128                 compatible = "ethernet-phy-ieee802.3-c22";
  129                 reg = <1>;
  130         };
  131 };
  132 
  133 &mmc0 {
  134         vmmc-supply = <&reg_cldo1>;
  135         cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
  136         bus-width = <4>;
  137         status = "okay";
  138 };
  139 
  140 &mmc2 {
  141         vmmc-supply = <&reg_cldo1>;
  142         vqmmc-supply = <&reg_bldo2>;
  143         non-removable;
  144         cap-mmc-hw-reset;
  145         mmc-hs200-1_8v;
  146         bus-width = <8>;
  147         status = "okay";
  148 };
  149 
  150 &ohci0 {
  151         status = "okay";
  152 };
  153 
  154 &ohci3 {
  155         status = "okay";
  156 };
  157 
  158 &pio {
  159         vcc-pc-supply = <&reg_bldo2>;
  160         vcc-pd-supply = <&reg_cldo1>;
  161         vcc-pg-supply = <&reg_aldo1>;
  162 };
  163 
  164 &r_i2c {
  165         status = "okay";
  166 
  167         axp805: pmic@36 {
  168                 compatible = "x-powers,axp805", "x-powers,axp806";
  169                 reg = <0x36>;
  170                 interrupt-parent = <&r_intc>;
  171                 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
  172                 interrupt-controller;
  173                 #interrupt-cells = <1>;
  174                 x-powers,self-working-mode;
  175 
  176                 regulators {
  177                         reg_aldo1: aldo1 {
  178                                 regulator-always-on;
  179                                 regulator-min-microvolt = <3300000>;
  180                                 regulator-max-microvolt = <3300000>;
  181                                 regulator-name = "vcc-pl";
  182                         };
  183 
  184                         reg_aldo2: aldo2 {
  185                                 regulator-min-microvolt = <3300000>;
  186                                 regulator-max-microvolt = <3300000>;
  187                                 regulator-name = "vcc-ac200";
  188                                 regulator-enable-ramp-delay = <100000>;
  189                         };
  190 
  191                         reg_aldo3: aldo3 {
  192                                 /* This regulator is connected with CLDO1 */
  193                                 regulator-always-on;
  194                                 regulator-min-microvolt = <3300000>;
  195                                 regulator-max-microvolt = <3300000>;
  196                                 regulator-name = "vcc-3v3-1";
  197                         };
  198 
  199                         reg_bldo1: bldo1 {
  200                                 regulator-always-on;
  201                                 regulator-min-microvolt = <1800000>;
  202                                 regulator-max-microvolt = <1800000>;
  203                                 regulator-name = "vcc-bias-pll";
  204                         };
  205 
  206                         reg_bldo2: bldo2 {
  207                                 regulator-always-on;
  208                                 regulator-min-microvolt = <1800000>;
  209                                 regulator-max-microvolt = <1800000>;
  210                                 regulator-name = "vcc-efuse-pcie-hdmi-io";
  211                         };
  212 
  213                         reg_bldo3: bldo3 {
  214                                 regulator-always-on;
  215                                 regulator-min-microvolt = <1800000>;
  216                                 regulator-max-microvolt = <1800000>;
  217                                 regulator-name = "vcc-dcxoio";
  218                         };
  219 
  220                         bldo4 {
  221                                 /* unused */
  222                         };
  223 
  224                         reg_cldo1: cldo1 {
  225                                 /* This regulator is connected with ALDO3 */
  226                                 regulator-always-on;
  227                                 regulator-min-microvolt = <3300000>;
  228                                 regulator-max-microvolt = <3300000>;
  229                                 regulator-name = "vcc-3v3-2";
  230                         };
  231 
  232                         reg_cldo2: cldo2 {
  233                                 regulator-min-microvolt = <3300000>;
  234                                 regulator-max-microvolt = <3300000>;
  235                                 regulator-name = "vcc-wifi-1";
  236                         };
  237 
  238                         reg_cldo3: cldo3 {
  239                                 regulator-min-microvolt = <3300000>;
  240                                 regulator-max-microvolt = <3300000>;
  241                                 regulator-name = "vcc-wifi-2";
  242                         };
  243 
  244                         reg_dcdca: dcdca {
  245                                 regulator-always-on;
  246                                 regulator-min-microvolt = <810000>;
  247                                 regulator-max-microvolt = <1160000>;
  248                                 regulator-ramp-delay = <2500>;
  249                                 regulator-name = "vdd-cpu";
  250                         };
  251 
  252                         reg_dcdcc: dcdcc {
  253                                 regulator-enable-ramp-delay = <32000>;
  254                                 regulator-min-microvolt = <810000>;
  255                                 regulator-max-microvolt = <1080000>;
  256                                 regulator-ramp-delay = <2500>;
  257                                 regulator-name = "vdd-gpu";
  258                         };
  259 
  260                         reg_dcdcd: dcdcd {
  261                                 regulator-always-on;
  262                                 regulator-min-microvolt = <960000>;
  263                                 regulator-max-microvolt = <960000>;
  264                                 regulator-name = "vdd-sys";
  265                         };
  266 
  267                         reg_dcdce: dcdce {
  268                                 regulator-always-on;
  269                                 regulator-min-microvolt = <1200000>;
  270                                 regulator-max-microvolt = <1200000>;
  271                                 regulator-name = "vcc-dram";
  272                         };
  273 
  274                         sw {
  275                                 /* unused */
  276                         };
  277                 };
  278         };
  279 
  280         pcf8563: rtc@51 {
  281                 compatible = "nxp,pcf8563";
  282                 reg = <0x51>;
  283                 interrupt-parent = <&r_intc>;
  284                 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
  285                 #clock-cells = <0>;
  286         };
  287 };
  288 
  289 &r_ir {
  290         status = "okay";
  291 };
  292 
  293 &r_pio {
  294         vcc-pm-supply = <&reg_aldo1>;
  295 };
  296 
  297 &rtc {
  298         clocks = <&ext_osc32k>;
  299 };
  300 
  301 /*
  302  * The CS pin is shared with the MMC2 CMD pin, so we cannot have the SPI
  303  * flash and eMMC at the same time, as one of them would fail probing.
  304  * Disable SPI0 in here, to prefer the more useful eMMC. U-Boot can
  305  * fix this up in no eMMC is connected.
  306  */
  307 &spi0 {
  308         pinctrl-0 = <&spi0_pins>, <&spi0_cs_pin>;
  309         pinctrl-names = "default";
  310         status = "disabled";
  311 
  312         flash@0 {
  313                 compatible = "winbond,w25q128", "jedec,spi-nor";
  314                 reg = <0>;
  315                 spi-max-frequency = <4000000>;
  316         };
  317 };
  318 
  319 &uart0 {
  320         pinctrl-names = "default";
  321         pinctrl-0 = <&uart0_ph_pins>;
  322         status = "okay";
  323 };
  324 
  325 &usb2otg {
  326         dr_mode = "host";
  327         status = "okay";
  328 };
  329 
  330 &usb2phy {
  331         usb0_vbus-supply = <&reg_usb_vbus>;
  332         usb3_vbus-supply = <&reg_usb_vbus>;
  333         status = "okay";
  334 };
Cache object: 8019b4b485f20c3b98c84929b5e8521b
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.
FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm64/allwinner/sun50i-h6-pine-h64.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/allwinner/sun50i-h6-pine-h64.dts
