meson-sm1-bananapi-m5.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
    1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
    2 /*
    3  * Copyright (c) 2021 BayLibre SAS
    4  * Author: Neil Armstrong <narmstrong@baylibre.com>
    5  */
    6 
    7 /dts-v1/;
    8 
    9 #include "meson-sm1.dtsi"
   10 #include <dt-bindings/leds/common.h>
   11 #include <dt-bindings/input/linux-event-codes.h>
   12 #include <dt-bindings/gpio/meson-g12a-gpio.h>
   13 #include <dt-bindings/sound/meson-g12a-toacodec.h>
   14 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
   15 
   16 / {
   17         compatible = "bananapi,bpi-m5", "amlogic,sm1";
   18         model = "Banana Pi BPI-M5";
   19 
   20         adc_keys {
   21                 compatible = "adc-keys";
   22                 io-channels = <&saradc 2>;
   23                 io-channel-names = "buttons";
   24                 keyup-threshold-microvolt = <1800000>;
   25 
   26                 key {
   27                         label = "SW3";
   28                         linux,code = <BTN_3>;
   29                         press-threshold-microvolt = <1700000>;
   30                 };
   31         };
   32 
   33         aliases {
   34                 serial0 = &uart_AO;
   35                 ethernet0 = &ethmac;
   36         };
   37 
   38         chosen {
   39                 stdout-path = "serial0:115200n8";
   40         };
   41 
   42         /* TOFIX: handle CVBS_DET on SARADC channel 0 */
   43         cvbs-connector {
   44                 compatible = "composite-video-connector";
   45 
   46                 port {
   47                         cvbs_connector_in: endpoint {
   48                                 remote-endpoint = <&cvbs_vdac_out>;
   49                         };
   50                 };
   51         };
   52 
   53         emmc_pwrseq: emmc-pwrseq {
   54                 compatible = "mmc-pwrseq-emmc";
   55                 reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
   56         };
   57 
   58         gpio-keys {
   59                 compatible = "gpio-keys";
   60 
   61                 key {
   62                         label = "SW1";
   63                         linux,code = <BTN_1>;
   64                         gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
   65                         interrupt-parent = <&gpio_intc>;
   66                         interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
   67                 };
   68         };
   69 
   70         hdmi-connector {
   71                 compatible = "hdmi-connector";
   72                 type = "a";
   73 
   74                 port {
   75                         hdmi_connector_in: endpoint {
   76                                 remote-endpoint = <&hdmi_tx_tmds_out>;
   77                         };
   78                 };
   79         };
   80 
   81         leds {
   82                 compatible = "gpio-leds";
   83 
   84                 green {
   85                         color = <LED_COLOR_ID_GREEN>;
   86                         function = LED_FUNCTION_STATUS;
   87                         gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
   88                 };
   89 
   90                 blue {
   91                         color = <LED_COLOR_ID_BLUE>;
   92                         function = LED_FUNCTION_STATUS;
   93                         gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_LOW>;
   94                         linux,default-trigger = "heartbeat";
   95                 };
   96         };
   97 
   98         memory@0 {
   99                 device_type = "memory";
  100                 reg = <0x0 0x0 0x0 0x40000000>;
  101         };
  102 
  103         emmc_1v8: regulator-emmc_1v8 {
  104                 compatible = "regulator-fixed";
  105                 regulator-name = "EMMC_1V8";
  106                 regulator-min-microvolt = <1800000>;
  107                 regulator-max-microvolt = <1800000>;
  108                 vin-supply = <&vddao_3v3>;
  109                 regulator-always-on;
  110         };
  111 
  112         dc_in: regulator-dc_in {
  113                 compatible = "regulator-fixed";
  114                 regulator-name = "DC_IN";
  115                 regulator-min-microvolt = <5000000>;
  116                 regulator-max-microvolt = <5000000>;
  117                 regulator-always-on;
  118         };
  119 
  120         vddio_c: regulator-vddio_c {
  121                 compatible = "regulator-gpio";
  122                 regulator-name = "VDDIO_C";
  123                 regulator-min-microvolt = <1800000>;
  124                 regulator-max-microvolt = <3300000>;
  125 
  126                 enable-gpio = <&gpio_ao GPIOE_2 GPIO_ACTIVE_HIGH>;
  127                 enable-active-high;
  128                 regulator-always-on;
  129 
  130                 gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_DRAIN>;
  131                 gpios-states = <1>;
  132 
  133                 states = <1800000 0>,
  134                          <3300000 1>;
  135         };
  136 
  137         tflash_vdd: regulator-tflash_vdd {
  138                 compatible = "regulator-fixed";
  139                 regulator-name = "TFLASH_VDD";
  140                 regulator-min-microvolt = <3300000>;
  141                 regulator-max-microvolt = <3300000>;
  142                 vin-supply = <&dc_in>;
  143                 gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
  144                 enable-active-high;
  145                 regulator-always-on;
  146         };
  147 
  148         vddao_1v8: regulator-vddao_1v8 {
  149                 compatible = "regulator-fixed";
  150                 regulator-name = "VDDAO_1V8";
  151                 regulator-min-microvolt = <1800000>;
  152                 regulator-max-microvolt = <1800000>;
  153                 vin-supply = <&vddao_3v3>;
  154                 regulator-always-on;
  155         };
  156 
  157         vddao_3v3: regulator-vddao_3v3 {
  158                 compatible = "regulator-fixed";
  159                 regulator-name = "VDDAO_3V3";
  160                 regulator-min-microvolt = <3300000>;
  161                 regulator-max-microvolt = <3300000>;
  162                 vin-supply = <&dc_in>;
  163                 regulator-always-on;
  164         };
  165 
  166         vddcpu: regulator-vddcpu {
  167                 /*
  168                  * SY8120B1ABC DC/DC Regulator.
  169                  */
  170                 compatible = "pwm-regulator";
  171 
  172                 regulator-name = "VDDCPU";
  173                 regulator-min-microvolt = <690000>;
  174                 regulator-max-microvolt = <1050000>;
  175 
  176                 pwm-supply = <&dc_in>;
  177 
  178                 pwms = <&pwm_AO_cd 1 1250 0>;
  179                 pwm-dutycycle-range = <100 0>;
  180 
  181                 regulator-boot-on;
  182                 regulator-always-on;
  183         };
  184 
  185         /* USB Hub Power Enable */
  186         vl_pwr_en: regulator-vl_pwr_en {
  187                 compatible = "regulator-fixed";
  188                 regulator-name = "VL_PWR_EN";
  189                 regulator-min-microvolt = <5000000>;
  190                 regulator-max-microvolt = <5000000>;
  191                 vin-supply = <&dc_in>;
  192 
  193                 gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
  194                 enable-active-high;
  195         };
  196 
  197         sound {
  198                 compatible = "amlogic,axg-sound-card";
  199                 model = "BPI-M5";
  200                 audio-widgets = "Line", "Lineout";
  201                 audio-aux-devs = <&tdmout_b>, <&tdmout_c>,
  202                                  <&tdmin_a>, <&tdmin_b>, <&tdmin_c>;
  203                 audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
  204                                 "TDMOUT_B IN 1", "FRDDR_B OUT 1",
  205                                 "TDMOUT_B IN 2", "FRDDR_C OUT 1",
  206                                 "TDM_B Playback", "TDMOUT_B OUT",
  207                                 "TDMOUT_C IN 0", "FRDDR_A OUT 2",
  208                                 "TDMOUT_C IN 1", "FRDDR_B OUT 2",
  209                                 "TDMOUT_C IN 2", "FRDDR_C OUT 2",
  210                                 "TDM_C Playback", "TDMOUT_C OUT",
  211                                 "TDMIN_A IN 4", "TDM_B Loopback",
  212                                 "TDMIN_B IN 4", "TDM_B Loopback",
  213                                 "TDMIN_C IN 4", "TDM_B Loopback",
  214                                 "TDMIN_A IN 5", "TDM_C Loopback",
  215                                 "TDMIN_B IN 5", "TDM_C Loopback",
  216                                 "TDMIN_C IN 5", "TDM_C Loopback",
  217                                 "TODDR_A IN 0", "TDMIN_A OUT",
  218                                 "TODDR_B IN 0", "TDMIN_A OUT",
  219                                 "TODDR_C IN 0", "TDMIN_A OUT",
  220                                 "TODDR_A IN 1", "TDMIN_B OUT",
  221                                 "TODDR_B IN 1", "TDMIN_B OUT",
  222                                 "TODDR_C IN 1", "TDMIN_B OUT",
  223                                 "TODDR_A IN 2", "TDMIN_C OUT",
  224                                 "TODDR_B IN 2", "TDMIN_C OUT",
  225                                 "TODDR_C IN 2", "TDMIN_C OUT",
  226                                 "Lineout", "ACODEC LOLP",
  227                                 "Lineout", "ACODEC LORP";
  228 
  229                 assigned-clocks = <&clkc CLKID_MPLL2>,
  230                                   <&clkc CLKID_MPLL0>,
  231                                   <&clkc CLKID_MPLL1>;
  232                 assigned-clock-parents = <0>, <0>, <0>;
  233                 assigned-clock-rates = <294912000>,
  234                                        <270950400>,
  235                                        <393216000>;
  236                 status = "okay";
  237 
  238                 dai-link-0 {
  239                         sound-dai = <&frddr_a>;
  240                 };
  241 
  242                 dai-link-1 {
  243                         sound-dai = <&frddr_b>;
  244                 };
  245 
  246                 dai-link-2 {
  247                         sound-dai = <&frddr_c>;
  248                 };
  249 
  250                 dai-link-3 {
  251                         sound-dai = <&toddr_a>;
  252                 };
  253 
  254                 dai-link-4 {
  255                         sound-dai = <&toddr_b>;
  256                 };
  257 
  258                 dai-link-5 {
  259                         sound-dai = <&toddr_c>;
  260                 };
  261 
  262                 /* 8ch hdmi interface */
  263                 dai-link-6 {
  264                         sound-dai = <&tdmif_b>;
  265                         dai-format = "i2s";
  266                         dai-tdm-slot-tx-mask-0 = <1 1>;
  267                         dai-tdm-slot-tx-mask-1 = <1 1>;
  268                         dai-tdm-slot-tx-mask-2 = <1 1>;
  269                         dai-tdm-slot-tx-mask-3 = <1 1>;
  270                         mclk-fs = <256>;
  271 
  272                         codec-0 {
  273                                 sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
  274                         };
  275 
  276                         codec-1 {
  277                                 sound-dai = <&toacodec TOACODEC_IN_B>;
  278                         };
  279                 };
  280 
  281                 /* i2s jack output interface */
  282                 dai-link-7 {
  283                         sound-dai = <&tdmif_c>;
  284                         dai-format = "i2s";
  285                         dai-tdm-slot-tx-mask-0 = <1 1>;
  286                         mclk-fs = <256>;
  287 
  288                         codec-0 {
  289                                 sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
  290                         };
  291 
  292                         codec-1 {
  293                                 sound-dai = <&toacodec TOACODEC_IN_C>;
  294                         };
  295                 };
  296 
  297                 /* hdmi glue */
  298                 dai-link-8 {
  299                         sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
  300 
  301                         codec {
  302                                 sound-dai = <&hdmi_tx>;
  303                         };
  304                 };
  305 
  306                 /* acodec glue */
  307                 dai-link-9 {
  308                         sound-dai = <&toacodec TOACODEC_OUT>;
  309 
  310                         codec {
  311                                 sound-dai = <&acodec>;
  312                         };
  313                 };
  314         };
  315 };
  316 
  317 &acodec {
  318         AVDD-supply = <&vddao_1v8>;
  319         status = "okay";
  320 };
  321 
  322 &arb {
  323         status = "okay";
  324 };
  325 
  326 &clkc_audio {
  327         status = "okay";
  328 };
  329 
  330 &cpu0 {
  331         cpu-supply = <&vddcpu>;
  332         operating-points-v2 = <&cpu_opp_table>;
  333         clocks = <&clkc CLKID_CPU_CLK>;
  334         clock-latency = <50000>;
  335 };
  336 
  337 &cpu1 {
  338         cpu-supply = <&vddcpu>;
  339         operating-points-v2 = <&cpu_opp_table>;
  340         clocks = <&clkc CLKID_CPU1_CLK>;
  341         clock-latency = <50000>;
  342 };
  343 
  344 &cpu2 {
  345         cpu-supply = <&vddcpu>;
  346         operating-points-v2 = <&cpu_opp_table>;
  347         clocks = <&clkc CLKID_CPU2_CLK>;
  348         clock-latency = <50000>;
  349 };
  350 
  351 &cpu3 {
  352         cpu-supply = <&vddcpu>;
  353         operating-points-v2 = <&cpu_opp_table>;
  354         clocks = <&clkc CLKID_CPU3_CLK>;
  355         clock-latency = <50000>;
  356 };
  357 
  358 &cvbs_vdac_port {
  359         cvbs_vdac_out: endpoint {
  360                 remote-endpoint = <&cvbs_connector_in>;
  361         };
  362 };
  363 
  364 &ext_mdio {
  365         external_phy: ethernet-phy@0 {
  366                 /* Realtek RTL8211F (0x001cc916) */
  367                 reg = <0>;
  368                 max-speed = <1000>;
  369 
  370                 interrupt-parent = <&gpio_intc>;
  371                 /* MAC_INTR on GPIOZ_14 */
  372                 interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
  373         };
  374 };
  375 
  376 &ethmac {
  377         pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
  378         pinctrl-names = "default";
  379         status = "okay";
  380         phy-mode = "rgmii-txid";
  381         phy-handle = <&external_phy>;
  382 };
  383 
  384 &frddr_a {
  385         status = "okay";
  386 };
  387 
  388 &frddr_b {
  389         status = "okay";
  390 };
  391 
  392 &frddr_c {
  393         status = "okay";
  394 };
  395 
  396 &gpio {
  397         gpio-line-names =
  398                 /* GPIOZ */
  399                 "ETH_MDIO", /* GPIOZ_0 */
  400                 "ETH_MDC", /* GPIOZ_1 */
  401                 "ETH_RXCLK", /* GPIOZ_2 */
  402                 "ETH_RX_DV", /* GPIOZ_3 */
  403                 "ETH_RXD0", /* GPIOZ_4 */
  404                 "ETH_RXD1", /* GPIOZ_5 */
  405                 "ETH_RXD2", /* GPIOZ_6 */
  406                 "ETH_RXD3", /* GPIOZ_7 */
  407                 "ETH_TXCLK", /* GPIOZ_8 */
  408                 "ETH_TXEN", /* GPIOZ_9 */
  409                 "ETH_TXD0", /* GPIOZ_10 */
  410                 "ETH_TXD1", /* GPIOZ_11 */
  411                 "ETH_TXD2", /* GPIOZ_12 */
  412                 "ETH_TXD3", /* GPIOZ_13 */
  413                 "ETH_INTR", /* GPIOZ_14 */
  414                 "ETH_NRST", /* GPIOZ_15 */
  415                 /* GPIOH */
  416                 "HDMI_SDA", /* GPIOH_0 */
  417                 "HDMI_SCL", /* GPIOH_1 */
  418                 "HDMI_HPD", /* GPIOH_2 */
  419                 "HDMI_CEC", /* GPIOH_3 */
  420                 "VL-RST_N", /* GPIOH_4 */
  421                 "CON1-P36", /* GPIOH_5 */
  422                 "VL-PWREN", /* GPIOH_6 */
  423                 "WiFi_3V3_1V8", /* GPIOH_7 */
  424                 "TFLASH_VDD_EN", /* GPIOH_8 */
  425                 /* BOOT */
  426                 "eMMC_D0", /* BOOT_0 */
  427                 "eMMC_D1", /* BOOT_1 */
  428                 "eMMC_D2", /* BOOT_2 */
  429                 "eMMC_D3", /* BOOT_3 */
  430                 "eMMC_D4", /* BOOT_4 */
  431                 "eMMC_D5", /* BOOT_5 */
  432                 "eMMC_D6", /* BOOT_6 */
  433                 "eMMC_D7", /* BOOT_7 */
  434                 "eMMC_CLK", /* BOOT_8 */
  435                 "",
  436                 "eMMC_CMD", /* BOOT_10 */
  437                 "",
  438                 "eMMC_RST#", /* BOOT_12 */
  439                 "eMMC_DS", /* BOOT_13 */
  440                 "", "",
  441                 /* GPIOC */
  442                 "SD_D0_B", /* GPIOC_0 */
  443                 "SD_D1_B", /* GPIOC_1 */
  444                 "SD_D2_B", /* GPIOC_2 */
  445                 "SD_D3_B", /* GPIOC_3 */
  446                 "SD_CLK_B", /* GPIOC_4 */
  447                 "SD_CMD_B", /* GPIOC_5 */
  448                 "CARD_EN_DET", /* GPIOC_6 */
  449                 "",
  450                 /* GPIOA */
  451                 "", "", "", "", "", "", "", "",
  452                 "", "", "", "", "", "",
  453                 "CON1-P27", /* GPIOA_14 */
  454                 "CON1-P28", /* GPIOA_15 */
  455                 /* GPIOX */
  456                 "CON1-P16", /* GPIOX_0 */
  457                 "CON1-P18", /* GPIOX_1 */
  458                 "CON1-P22", /* GPIOX_2 */
  459                 "CON1-P11", /* GPIOX_3 */
  460                 "CON1-P13", /* GPIOX_4 */
  461                 "CON1-P07", /* GPIOX_5 */
  462                 "CON1-P33", /* GPIOX_6 */
  463                 "CON1-P15", /* GPIOX_7 */
  464                 "CON1-P19", /* GPIOX_8 */
  465                 "CON1-P21", /* GPIOX_9 */
  466                 "CON1-P24", /* GPIOX_10 */
  467                 "CON1-P23", /* GPIOX_11 */
  468                 "CON1-P08", /* GPIOX_12 */
  469                 "CON1-P10", /* GPIOX_13 */
  470                 "CON1-P29", /* GPIOX_14 */
  471                 "CON1-P31", /* GPIOX_15 */
  472                 "CON1-P26", /* GPIOX_16 */
  473                 "CON1-P03", /* GPIOX_17 */
  474                 "CON1-P05", /* GPIOX_18 */
  475                 "CON1-P32"; /* GPIOX_19 */
  476 
  477         /*
  478          * WARNING: The USB Hub on the BPI-M5 needs a reset signal
  479          * to be turned high in order to be detected by the USB Controller
  480          * This signal should be handled by a USB specific power sequence
  481          * in order to reset the Hub when USB bus is powered down.
  482          */
  483         usb-hub {
  484                 gpio-hog;
  485                 gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
  486                 output-high;
  487                 line-name = "usb-hub-reset";
  488         };
  489 };
  490 
  491 &gpio_ao {
  492         gpio-line-names =
  493                 /* GPIOAO */
  494                 "DEBUG TX", /* GPIOAO_0 */
  495                 "DEBUG RX", /* GPIOAO_1 */
  496                 "SYS_LED2", /* GPIOAO_2 */
  497                 "UPDATE_KEY", /* GPIOAO_3 */
  498                 "CON1-P40", /* GPIOAO_4 */
  499                 "IR_IN", /* GPIOAO_5 */
  500                 "TF_3V3N_1V8_EN", /* GPIOAO_6 */
  501                 "CON1-P35", /* GPIOAO_7 */
  502                 "CON1-P12", /* GPIOAO_8 */
  503                 "CON1-P37", /* GPIOAO_9 */
  504                 "CON1-P38", /* GPIOAO_10 */
  505                 "SYS_LED", /* GPIOAO_11 */
  506                 /* GPIOE */
  507                 "VDDEE_PWM", /* GPIOE_0 */
  508                 "VDDCPU_PWM", /* GPIOE_1 */
  509                 "TF_PWR_EN"; /* GPIOE_2 */
  510 };
  511 
  512 &hdmi_tx {
  513         status = "okay";
  514         pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
  515         pinctrl-names = "default";
  516         hdmi-supply = <&dc_in>;
  517 };
  518 
  519 &hdmi_tx_tmds_port {
  520         hdmi_tx_tmds_out: endpoint {
  521                 remote-endpoint = <&hdmi_connector_in>;
  522         };
  523 };
  524 
  525 &ir {
  526         status = "okay";
  527         pinctrl-0 = <&remote_input_ao_pins>;
  528         pinctrl-names = "default";
  529 };
  530 
  531 &pwm_AO_cd {
  532         pinctrl-0 = <&pwm_ao_d_e_pins>;
  533         pinctrl-names = "default";
  534         clocks = <&xtal>;
  535         clock-names = "clkin1";
  536         status = "okay";
  537 };
  538 
  539 &saradc {
  540         status = "okay";
  541         vref-supply = <&vddao_1v8>;
  542 };
  543 
  544 /* SD card */
  545 &sd_emmc_b {
  546         status = "okay";
  547         pinctrl-0 = <&sdcard_c_pins>;
  548         pinctrl-1 = <&sdcard_clk_gate_c_pins>;
  549         pinctrl-names = "default", "clk-gate";
  550 
  551         bus-width = <4>;
  552         cap-sd-highspeed;
  553         max-frequency = <50000000>;
  554         disable-wp;
  555 
  556         /* TOFIX: SD card is barely usable in SDR modes */
  557 
  558         cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
  559         vmmc-supply = <&tflash_vdd>;
  560         vqmmc-supply = <&vddio_c>;
  561 };
  562 
  563 /* eMMC */
  564 &sd_emmc_c {
  565         status = "okay";
  566         pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
  567         pinctrl-1 = <&emmc_clk_gate_pins>;
  568         pinctrl-names = "default", "clk-gate";
  569 
  570         bus-width = <8>;
  571         cap-mmc-highspeed;
  572         mmc-ddr-1_8v;
  573         mmc-hs200-1_8v;
  574         max-frequency = <200000000>;
  575         disable-wp;
  576 
  577         mmc-pwrseq = <&emmc_pwrseq>;
  578         vmmc-supply = <&vddao_3v3>;
  579         vqmmc-supply = <&emmc_1v8>;
  580 };
  581 
  582 &tdmif_b {
  583         status = "okay";
  584 };
  585 
  586 &tdmif_c {
  587         status = "okay";
  588 };
  589 
  590 &tdmin_a {
  591         status = "okay";
  592 };
  593 
  594 &tdmin_b {
  595         status = "okay";
  596 };
  597 
  598 &tdmin_c {
  599         status = "okay";
  600 };
  601 
  602 &tdmout_b {
  603         status = "okay";
  604 };
  605 
  606 &tdmout_c {
  607         status = "okay";
  608 };
  609 
  610 &toacodec {
  611         status = "okay";
  612 };
  613 
  614 &tohdmitx {
  615         status = "okay";
  616 };
  617 
  618 &toddr_a {
  619         status = "okay";
  620 };
  621 
  622 &toddr_b {
  623         status = "okay";
  624 };
  625 
  626 &toddr_c {
  627         status = "okay";
  628 };
  629 
  630 &uart_AO {
  631         status = "okay";
  632         pinctrl-0 = <&uart_ao_a_pins>;
  633         pinctrl-names = "default";
  634 };
  635 
  636 &usb {
  637         status = "okay";
  638 };
  639 
  640 &usb2_phy0 {
  641         phy-supply = <&dc_in>;
  642 };
  643 
  644 &usb2_phy1 {
  645         /* Enable the hub which is connected to this port */
  646         phy-supply = <&vl_pwr_en>;
  647 };
Cache object: b57ad2c0559138de52af11a06ad2bc7c
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.
FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm64/amlogic/meson-sm1-bananapi-m5.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/amlogic/meson-sm1-bananapi-m5.dts
