meson-sm1-h96-max.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
    2 /*
    3  * Copyright (c) 2019 BayLibre SAS. All rights reserved.
    4  * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
    5  */
    6 
    7 /dts-v1/;
    8 
    9 #include "meson-sm1-ac2xx.dtsi"
   10 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
   11 
   12 / {
   13         compatible = "haochuangyi,h96-max", "amlogic,sm1";
   14         model = "Shenzhen Haochuangyi Technology Co., Ltd H96 Max";
   15 
   16         sound {
   17                 compatible = "amlogic,axg-sound-card";
   18                 model = "H96-MAX";
   19                 audio-aux-devs = <&tdmout_b>;
   20                 audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
   21                                 "TDMOUT_B IN 1", "FRDDR_B OUT 1",
   22                                 "TDMOUT_B IN 2", "FRDDR_C OUT 1",
   23                                 "TDM_B Playback", "TDMOUT_B OUT";
   24 
   25                 assigned-clocks = <&clkc CLKID_MPLL2>,
   26                                   <&clkc CLKID_MPLL0>,
   27                                   <&clkc CLKID_MPLL1>;
   28                 assigned-clock-parents = <0>, <0>, <0>;
   29                 assigned-clock-rates = <294912000>,
   30                                        <270950400>,
   31                                        <393216000>;
   32                 status = "okay";
   33 
   34                 dai-link-0 {
   35                         sound-dai = <&frddr_a>;
   36                 };
   37 
   38                 dai-link-1 {
   39                         sound-dai = <&frddr_b>;
   40                 };
   41 
   42                 dai-link-2 {
   43                         sound-dai = <&frddr_c>;
   44                 };
   45 
   46                 /* 8ch hdmi interface */
   47                 dai-link-3 {
   48                         sound-dai = <&tdmif_b>;
   49                         dai-format = "i2s";
   50                         dai-tdm-slot-tx-mask-0 = <1 1>;
   51                         dai-tdm-slot-tx-mask-1 = <1 1>;
   52                         dai-tdm-slot-tx-mask-2 = <1 1>;
   53                         dai-tdm-slot-tx-mask-3 = <1 1>;
   54                         mclk-fs = <256>;
   55 
   56                         codec {
   57                                 sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
   58                         };
   59                 };
   60 
   61                 /* hdmi glue */
   62                 dai-link-4 {
   63                         sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
   64 
   65                         codec {
   66                                 sound-dai = <&hdmi_tx>;
   67                         };
   68                 };
   69         };
   70 };
   71 
   72 &arb {
   73         status = "okay";
   74 };
   75 
   76 &clkc_audio {
   77         status = "okay";
   78 };
   79 
   80 &ethmac {
   81         status = "okay";
   82 
   83         pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
   84         pinctrl-names = "default";
   85         phy-mode = "rgmii-txid";
   86         phy-handle = <&external_phy>;
   87 
   88         rx-internal-delay-ps = <800>;
   89 };
   90 
   91 &ext_mdio {
   92         external_phy: ethernet-phy@0 {
   93                 /* Realtek RTL8211F (0x001cc916) */
   94                 reg = <0>;
   95                 max-speed = <1000>;
   96 
   97                 reset-assert-us = <10000>;
   98                 reset-deassert-us = <80000>;
   99                 reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
  100 
  101                 interrupt-parent = <&gpio_intc>;
  102                 /* MAC_INTR on GPIOZ_14 */
  103                 interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
  104         };
  105 };
  106 
  107 &frddr_a {
  108         status = "okay";
  109 };
  110 
  111 &frddr_b {
  112         status = "okay";
  113 };
  114 
  115 &frddr_c {
  116         status = "okay";
  117 };
  118 
  119 &tdmif_b {
  120         status = "okay";
  121 };
  122 
  123 &tdmout_b {
  124         status = "okay";
  125 };
  126 
  127 &tohdmitx {
  128         status = "okay";
  129 };
  130 
  131 &uart_A {
  132         status = "okay";
  133 
  134         pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
  135         pinctrl-names = "default";
  136         uart-has-rtscts;
  137 
  138         bluetooth {
  139                 compatible = "brcm,bcm43438-bt";
  140                 shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
  141                 max-speed = <2000000>;
  142                 clocks = <&wifi32k>;
  143                 clock-names = "lpo";
  144         };
  145 };

Cache object: b9dbc1b0d5d96805cf6146f57f9b9413

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm64/amlogic/meson-sm1-h96-max.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/amlogic/meson-sm1-h96-max.dts