fsl-ls1028a-rdb.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
    2 /*
    3  * Device Tree file for NXP LS1028A RDB Board.
    4  *
    5  * Copyright 2018-2021 NXP
    6  *
    7  * Harninder Rai <harninder.rai@nxp.com>
    8  *
    9  */
   10 
   11 /dts-v1/;
   12 #include "fsl-ls1028a.dtsi"
   13 
   14 / {
   15         model = "LS1028A RDB Board";
   16         compatible = "fsl,ls1028a-rdb", "fsl,ls1028a";
   17 
   18         aliases {
   19                 crypto = &crypto;
   20                 serial0 = &duart0;
   21                 serial1 = &duart1;
   22                 mmc0 = &esdhc;
   23                 mmc1 = &esdhc1;
   24                 rtc1 = &ftm_alarm1;
   25                 spi0 = &fspi;
   26                 ethernet0 = &enetc_port0;
   27                 ethernet1 = &enetc_port2;
   28                 ethernet2 = &mscc_felix_port0;
   29                 ethernet3 = &mscc_felix_port1;
   30                 ethernet4 = &mscc_felix_port2;
   31                 ethernet5 = &mscc_felix_port3;
   32         };
   33 
   34         chosen {
   35                 stdout-path = "serial0:115200n8";
   36         };
   37 
   38         memory@80000000 {
   39                 device_type = "memory";
   40                 reg = <0x0 0x80000000 0x1 0x0000000>;
   41         };
   42 
   43         sys_mclk: clock-mclk {
   44                 compatible = "fixed-clock";
   45                 #clock-cells = <0>;
   46                 clock-frequency = <25000000>;
   47         };
   48 
   49         reg_1p8v: regulator-1p8v {
   50                 compatible = "regulator-fixed";
   51                 regulator-name = "1P8V";
   52                 regulator-min-microvolt = <1800000>;
   53                 regulator-max-microvolt = <1800000>;
   54                 regulator-always-on;
   55         };
   56 
   57         sb_3v3: regulator-sb3v3 {
   58                 compatible = "regulator-fixed";
   59                 regulator-name = "3v3_vbus";
   60                 regulator-min-microvolt = <3300000>;
   61                 regulator-max-microvolt = <3300000>;
   62                 regulator-boot-on;
   63                 regulator-always-on;
   64         };
   65 
   66         sound {
   67                 compatible = "simple-audio-card";
   68                 simple-audio-card,format = "i2s";
   69                 simple-audio-card,widgets =
   70                         "Microphone", "Microphone Jack",
   71                         "Headphone", "Headphone Jack",
   72                         "Speaker", "Speaker Ext",
   73                         "Line", "Line In Jack";
   74                 simple-audio-card,routing =
   75                         "MIC_IN", "Microphone Jack",
   76                         "Microphone Jack", "Mic Bias",
   77                         "LINE_IN", "Line In Jack",
   78                         "Headphone Jack", "HP_OUT",
   79                         "Speaker Ext", "LINE_OUT";
   80 
   81                 simple-audio-card,cpu {
   82                         sound-dai = <&sai4>;
   83                         frame-master;
   84                         bitclock-master;
   85                 };
   86 
   87                 simple-audio-card,codec {
   88                         sound-dai = <&sgtl5000>;
   89                         frame-master;
   90                         bitclock-master;
   91                         system-clock-frequency = <25000000>;
   92                 };
   93         };
   94 };
   95 
   96 &can0 {
   97         status = "okay";
   98 
   99         can-transceiver {
  100                 max-bitrate = <5000000>;
  101         };
  102 };
  103 
  104 &can1 {
  105         status = "okay";
  106 
  107         can-transceiver {
  108                 max-bitrate = <5000000>;
  109         };
  110 };
  111 
  112 &duart0 {
  113         status = "okay";
  114 };
  115 
  116 &duart1 {
  117         status = "okay";
  118 };
  119 
  120 &enetc_mdio_pf3 {
  121         sgmii_phy0: ethernet-phy@2 {
  122                 reg = <0x2>;
  123         };
  124 
  125         /* VSC8514 QSGMII quad PHY */
  126         qsgmii_phy0: ethernet-phy@10 {
  127                 reg = <0x10>;
  128         };
  129 
  130         qsgmii_phy1: ethernet-phy@11 {
  131                 reg = <0x11>;
  132         };
  133 
  134         qsgmii_phy2: ethernet-phy@12 {
  135                 reg = <0x12>;
  136         };
  137 
  138         qsgmii_phy3: ethernet-phy@13 {
  139                 reg = <0x13>;
  140         };
  141 };
  142 
  143 &enetc_port0 {
  144         phy-handle = <&sgmii_phy0>;
  145         phy-mode = "sgmii";
  146         managed = "in-band-status";
  147         status = "okay";
  148 };
  149 
  150 &enetc_port2 {
  151         status = "okay";
  152 };
  153 
  154 &esdhc {
  155         sd-uhs-sdr104;
  156         sd-uhs-sdr50;
  157         sd-uhs-sdr25;
  158         sd-uhs-sdr12;
  159         status = "okay";
  160 };
  161 
  162 &esdhc1 {
  163         mmc-hs200-1_8v;
  164         mmc-hs400-1_8v;
  165         bus-width = <8>;
  166         status = "okay";
  167 };
  168 
  169 &fspi {
  170         status = "okay";
  171 
  172         mt35xu02g0: flash@0 {
  173                 compatible = "jedec,spi-nor";
  174                 #address-cells = <1>;
  175                 #size-cells = <1>;
  176                 spi-max-frequency = <50000000>;
  177                 /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
  178                 spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
  179                 spi-tx-bus-width = <1>; /* 1 SPI Tx line */
  180                 reg = <0>;
  181         };
  182 };
  183 
  184 &ftm_alarm1 {
  185         status = "okay";
  186 };
  187 
  188 &i2c0 {
  189         status = "okay";
  190 
  191         i2c-mux@77 {
  192                 compatible = "nxp,pca9847";
  193                 reg = <0x77>;
  194                 #address-cells = <1>;
  195                 #size-cells = <0>;
  196 
  197                 i2c@1 {
  198                         #address-cells = <1>;
  199                         #size-cells = <0>;
  200                         reg = <0x1>;
  201 
  202                         sgtl5000: audio-codec@a {
  203                                 #sound-dai-cells = <0>;
  204                                 compatible = "fsl,sgtl5000";
  205                                 reg = <0xa>;
  206                                 VDDA-supply = <&reg_1p8v>;
  207                                 VDDIO-supply = <&reg_1p8v>;
  208                                 clocks = <&sys_mclk>;
  209                                 sclk-strength = <3>;
  210                         };
  211                 };
  212 
  213                 i2c@2 {
  214                         #address-cells = <1>;
  215                         #size-cells = <0>;
  216                         reg = <0x02>;
  217 
  218                         current-monitor@40 {
  219                                 compatible = "ti,ina220";
  220                                 reg = <0x40>;
  221                                 shunt-resistor = <500>;
  222                         };
  223                 };
  224 
  225                 i2c@3 {
  226                         #address-cells = <1>;
  227                         #size-cells = <0>;
  228                         reg = <0x3>;
  229 
  230                         temperature-sensor@4c {
  231                                 compatible = "nxp,sa56004";
  232                                 reg = <0x4c>;
  233                                 vcc-supply = <&sb_3v3>;
  234                         };
  235 
  236                         rtc@51 {
  237                                 compatible = "nxp,pcf2129";
  238                                 reg = <0x51>;
  239                         };
  240                 };
  241         };
  242 };
  243 
  244 &mscc_felix {
  245         status = "okay";
  246 };
  247 
  248 &mscc_felix_port0 {
  249         label = "swp0";
  250         managed = "in-band-status";
  251         phy-handle = <&qsgmii_phy0>;
  252         phy-mode = "qsgmii";
  253         status = "okay";
  254 };
  255 
  256 &mscc_felix_port1 {
  257         label = "swp1";
  258         managed = "in-band-status";
  259         phy-handle = <&qsgmii_phy1>;
  260         phy-mode = "qsgmii";
  261         status = "okay";
  262 };
  263 
  264 &mscc_felix_port2 {
  265         label = "swp2";
  266         managed = "in-band-status";
  267         phy-handle = <&qsgmii_phy2>;
  268         phy-mode = "qsgmii";
  269         status = "okay";
  270 };
  271 
  272 &mscc_felix_port3 {
  273         label = "swp3";
  274         managed = "in-band-status";
  275         phy-handle = <&qsgmii_phy3>;
  276         phy-mode = "qsgmii";
  277         status = "okay";
  278 };
  279 
  280 &mscc_felix_port4 {
  281         ethernet = <&enetc_port2>;
  282         status = "okay";
  283 };
  284 
  285 &optee {
  286         status = "okay";
  287 };
  288 
  289 &pwm0 {
  290         status = "okay";
  291 };
  292 
  293 &sai4 {
  294         status = "okay";
  295 };
  296 
  297 &sata {
  298         status = "okay";
  299 };
  300 
  301 &usb0 {
  302         dr_mode = "host";
  303         status = "okay";
  304 };
  305 
  306 &usb1 {
  307         status = "okay";
  308 };

Cache object: ebe2601afc7154c5df93dc140a779d9d

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm64/freescale/fsl-ls1028a-rdb.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/freescale/fsl-ls1028a-rdb.dts