fsl-ls1088a-ten64.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
    1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
    2 /*
    3  * Device Tree file for Travese Ten64 (LS1088) board
    4  * Based on fsl-ls1088a-rdb.dts
    5  * Copyright 2017-2020 NXP
    6  * Copyright 2019-2021 Traverse Technologies
    7  *
    8  * Author: Mathew McBride <matt@traverse.com.au>
    9  */
   10 
   11 /dts-v1/;
   12 
   13 #include "fsl-ls1088a.dtsi"
   14 
   15 #include <dt-bindings/gpio/gpio.h>
   16 #include <dt-bindings/input/input.h>
   17 
   18 / {
   19         model = "Traverse Ten64";
   20         compatible = "traverse,ten64", "fsl,ls1088a";
   21 
   22         aliases {
   23                 serial0 = &duart0;
   24                 serial1 = &duart1;
   25         };
   26 
   27         chosen {
   28                 stdout-path = "serial0:115200n8";
   29         };
   30 
   31         buttons {
   32                 compatible = "gpio-keys";
   33 
   34                 /* Fired by system controller when
   35                  * external power off (e.g ATX Power Button)
   36                  * asserted
   37                  */
   38                 button-powerdn {
   39                         label = "External Power Down";
   40                         gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
   41                         linux,code = <KEY_POWER>;
   42                 };
   43 
   44                 /* Rear Panel 'ADMIN' button (GPIO_H) */
   45                 button-admin {
   46                         label = "ADMIN button";
   47                         gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
   48                         linux,code = <KEY_WPS_BUTTON>;
   49                 };
   50         };
   51 
   52         leds {
   53                 compatible = "gpio-leds";
   54 
   55                 led-0 {
   56                         label = "ten64:green:sfp1:down";
   57                         gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
   58                 };
   59 
   60                 led-1 {
   61                         label = "ten64:green:sfp2:up";
   62                         gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
   63                 };
   64 
   65                 led-2 {
   66                         label = "ten64:admin";
   67                         gpios = <&sfpgpio 12 GPIO_ACTIVE_HIGH>;
   68                 };
   69         };
   70 
   71         sfp_xg0: dpmac2-sfp {
   72                 compatible = "sff,sfp";
   73                 i2c-bus = <&sfplower_i2c>;
   74                 tx-fault-gpios = <&sfpgpio 0 GPIO_ACTIVE_HIGH>;
   75                 tx-disable-gpios = <&sfpgpio 1 GPIO_ACTIVE_HIGH>;
   76                 mod-def0-gpios = <&sfpgpio 2 GPIO_ACTIVE_LOW>;
   77                 los-gpios = <&sfpgpio 3 GPIO_ACTIVE_HIGH>;
   78                 maximum-power-milliwatt = <2000>;
   79         };
   80 
   81         sfp_xg1: dpmac1-sfp {
   82                 compatible = "sff,sfp";
   83                 i2c-bus = <&sfpupper_i2c>;
   84                 tx-fault-gpios = <&sfpgpio 4 GPIO_ACTIVE_HIGH>;
   85                 tx-disable-gpios = <&sfpgpio 5 GPIO_ACTIVE_HIGH>;
   86                 mod-def0-gpios = <&sfpgpio 6 GPIO_ACTIVE_LOW>;
   87                 los-gpios = <&sfpgpio 7 GPIO_ACTIVE_HIGH>;
   88                 maximum-power-milliwatt = <2000>;
   89         };
   90 };
   91 
   92 /* XG1 - Upper SFP */
   93 &dpmac1 {
   94         sfp = <&sfp_xg1>;
   95         pcs-handle = <&pcs1>;
   96         phy-connection-type = "10gbase-r";
   97         managed = "in-band-status";
   98 };
   99 
  100 /* XG0 - Lower SFP */
  101 &dpmac2 {
  102         sfp = <&sfp_xg0>;
  103         pcs-handle = <&pcs2>;
  104         phy-connection-type = "10gbase-r";
  105         managed = "in-band-status";
  106 };
  107 
  108 /* DPMAC3..6 is GE4 to GE8 */
  109 &dpmac3 {
  110         phy-handle = <&mdio1_phy5>;
  111         phy-connection-type = "qsgmii";
  112         managed = "in-band-status";
  113         pcs-handle = <&pcs3_0>;
  114 };
  115 
  116 &dpmac4 {
  117         phy-handle = <&mdio1_phy6>;
  118         phy-connection-type = "qsgmii";
  119         managed = "in-band-status";
  120         pcs-handle = <&pcs3_1>;
  121 };
  122 
  123 &dpmac5 {
  124         phy-handle = <&mdio1_phy7>;
  125         phy-connection-type = "qsgmii";
  126         managed = "in-band-status";
  127         pcs-handle = <&pcs3_2>;
  128 };
  129 
  130 &dpmac6 {
  131         phy-handle = <&mdio1_phy8>;
  132         phy-connection-type = "qsgmii";
  133         managed = "in-band-status";
  134         pcs-handle = <&pcs3_3>;
  135 };
  136 
  137 /* DPMAC7..10 is GE0 to GE3 */
  138 &dpmac7 {
  139         phy-handle = <&mdio1_phy1>;
  140         phy-connection-type = "qsgmii";
  141         managed = "in-band-status";
  142         pcs-handle = <&pcs7_0>;
  143 };
  144 
  145 &dpmac8 {
  146         phy-handle = <&mdio1_phy2>;
  147         phy-connection-type = "qsgmii";
  148         managed = "in-band-status";
  149         pcs-handle = <&pcs7_1>;
  150 };
  151 
  152 &dpmac9 {
  153         phy-handle = <&mdio1_phy3>;
  154         phy-connection-type = "qsgmii";
  155         managed = "in-band-status";
  156         pcs-handle = <&pcs7_2>;
  157 };
  158 
  159 &dpmac10 {
  160         phy-handle = <&mdio1_phy4>;
  161         phy-connection-type = "qsgmii";
  162         managed = "in-band-status";
  163         pcs-handle = <&pcs7_3>;
  164 };
  165 
  166 &duart0 {
  167         status = "okay";
  168 };
  169 
  170 &duart1 {
  171         status = "okay";
  172 };
  173 
  174 &emdio1 {
  175         status = "okay";
  176 
  177         mdio1_phy5: ethernet-phy@c {
  178                 reg = <0xc>;
  179         };
  180 
  181         mdio1_phy6: ethernet-phy@d {
  182                 reg = <0xd>;
  183         };
  184 
  185         mdio1_phy7: ethernet-phy@e {
  186                 reg = <0xe>;
  187         };
  188 
  189         mdio1_phy8: ethernet-phy@f {
  190                 reg = <0xf>;
  191         };
  192 
  193         mdio1_phy1: ethernet-phy@1c {
  194                 reg = <0x1c>;
  195         };
  196 
  197         mdio1_phy2: ethernet-phy@1d {
  198                 reg = <0x1d>;
  199         };
  200 
  201         mdio1_phy3: ethernet-phy@1e {
  202                 reg = <0x1e>;
  203         };
  204 
  205         mdio1_phy4: ethernet-phy@1f {
  206                 reg = <0x1f>;
  207         };
  208 };
  209 
  210 &esdhc {
  211         status = "okay";
  212 };
  213 
  214 &i2c0 {
  215         status = "okay";
  216 
  217         sfpgpio: gpio@76 {
  218                 compatible = "ti,tca9539";
  219                 reg = <0x76>;
  220                 #gpio-cells = <2>;
  221                 gpio-controller;
  222 
  223                 admin_led_lower {
  224                         gpio-hog;
  225                         gpios = <13 GPIO_ACTIVE_HIGH>;
  226                         output-low;
  227                 };
  228         };
  229 
  230         at97sc: tpm@29 {
  231                 compatible = "atmel,at97sc3204t";
  232                 reg = <0x29>;
  233         };
  234 };
  235 
  236 &i2c2 {
  237         status = "okay";
  238 
  239         rx8035: rtc@32 {
  240                 compatible = "epson,rx8035";
  241                 reg = <0x32>;
  242         };
  243 };
  244 
  245 &i2c3 {
  246         status = "okay";
  247 
  248         i2c-switch@70 {
  249                 compatible = "nxp,pca9540";
  250                 #address-cells = <1>;
  251                 #size-cells = <0>;
  252                 reg = <0x70>;
  253 
  254                 sfpupper_i2c: i2c@0 {
  255                         #address-cells = <1>;
  256                         #size-cells = <0>;
  257                         reg = <0>;
  258                 };
  259 
  260                 sfplower_i2c: i2c@1 {
  261                         #address-cells = <1>;
  262                         #size-cells = <0>;
  263                         reg = <1>;
  264                 };
  265         };
  266 };
  267 
  268 &pcs_mdio1 {
  269         status = "okay";
  270 };
  271 
  272 &pcs_mdio2 {
  273         status = "okay";
  274 };
  275 
  276 &pcs_mdio3 {
  277         status = "okay";
  278 };
  279 
  280 &pcs_mdio7 {
  281         status = "okay";
  282 };
  283 
  284 &qspi {
  285         status = "okay";
  286 
  287         en25s64: flash@0 {
  288                 compatible = "jedec,spi-nor";
  289                 #address-cells = <1>;
  290                 #size-cells = <1>;
  291                 reg = <0>;
  292                 spi-max-frequency = <20000000>;
  293                 spi-rx-bus-width = <4>;
  294                 spi-tx-bus-width = <4>;
  295 
  296                 partitions {
  297                         compatible = "fixed-partitions";
  298                         #address-cells = <1>;
  299                         #size-cells = <1>;
  300 
  301                         partition@0 {
  302                                 label = "bl2";
  303                                 reg = <0 0x100000>;
  304                         };
  305 
  306                         partition@100000 {
  307                                 label = "bl3";
  308                                 reg = <0x100000 0x200000>;
  309                         };
  310 
  311                         partition@300000 {
  312                                 label = "mcfirmware";
  313                                 reg = <0x300000 0x200000>;
  314                         };
  315 
  316                         partition@500000 {
  317                                 label = "ubootenv";
  318                                 reg = <0x500000 0x80000>;
  319                         };
  320 
  321                         partition@580000 {
  322                                 label = "dpl";
  323                                 reg = <0x580000 0x40000>;
  324                         };
  325 
  326                         partition@5C0000 {
  327                                 label = "dpc";
  328                                 reg = <0x5C0000 0x40000>;
  329                         };
  330 
  331                         partition@600000 {
  332                                 label = "devicetree";
  333                                 reg = <0x600000 0x40000>;
  334                         };
  335                 };
  336         };
  337 
  338         nand: flash@1 {
  339                 compatible = "spi-nand";
  340                 #address-cells = <1>;
  341                 #size-cells = <1>;
  342                 reg = <1>;
  343                 spi-max-frequency = <20000000>;
  344                 spi-rx-bus-width = <4>;
  345                 spi-tx-bus-width = <4>;
  346 
  347                 partitions {
  348                         compatible = "fixed-partitions";
  349                         #address-cells = <1>;
  350                         #size-cells = <1>;
  351 
  352                         /* reserved for future boot direct from NAND flash
  353                          * (this would use the same layout as the 8MiB NOR flash)
  354                          */
  355                         partition@0 {
  356                                 label = "nand-boot-reserved";
  357                                 reg = <0 0x800000>;
  358                         };
  359 
  360                         /* recovery / install environment */
  361                         partition@800000 {
  362                                 label = "recovery";
  363                                 reg = <0x800000 0x2000000>;
  364                         };
  365 
  366                         /* ubia (first OpenWrt) - a/b names to prevent confusion with ubi0/1/etc. */
  367                         partition@2800000 {
  368                                 label = "ubia";
  369                                 reg = <0x2800000 0x6C00000>;
  370                         };
  371 
  372                         /* ubib (second OpenWrt) */
  373                         partition@9400000 {
  374                                 label = "ubib";
  375                                 reg = <0x9400000 0x6C00000>;
  376                         };
  377                 };
  378         };
  379 };
  380 
  381 &usb0 {
  382         status = "okay";
  383 };
  384 
  385 &usb1 {
  386         status = "okay";
  387 };
Cache object: 4ead919ed9948fa63ad5cf76d115b7db
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.
FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm64/freescale/fsl-ls1088a-ten64.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/freescale/fsl-ls1088a-ten64.dts
