Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/freescale/imx8mp-tqma8mpql.dtsi
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT 2 /* 3 * Copyright 2021-2022 TQ-Systems GmbH 4 * Author: Alexander Stein <alexander.stein@tq-group.com> 5 */ 6 7 #include "imx8mp.dtsi" 8 9 / { 10 model = "TQ-Systems i.MX8MPlus TQMa8MPxL"; 11 compatible = "tq,imx8mp-tqma8mpql", "fsl,imx8mp"; 12 13 memory@40000000 { 14 device_type = "memory"; 15 reg = <0x0 0x40000000 0 0x80000000>; 16 }; 17 18 /* identical to buck4_reg, but should never change */ 19 reg_vcc3v3: regulator-vcc3v3 { 20 compatible = "regulator-fixed"; 21 regulator-name = "VCC3V3"; 22 regulator-min-microvolt = <3300000>; 23 regulator-max-microvolt = <3300000>; 24 regulator-always-on; 25 }; 26 27 /* e-MMC IO, needed for HS modes */ 28 reg_vcc1v8: regulator-vcc1v8 { 29 compatible = "regulator-fixed"; 30 regulator-name = "VCC1V8"; 31 regulator-min-microvolt = <1800000>; 32 regulator-max-microvolt = <1800000>; 33 regulator-always-on; 34 }; 35 }; 36 37 &A53_0 { 38 cpu-supply = <&buck2_reg>; 39 }; 40 41 &flexspi { 42 pinctrl-names = "default"; 43 pinctrl-0 = <&pinctrl_flexspi0>; 44 status = "okay"; 45 46 flash0: flash@0 { 47 reg = <0>; 48 #address-cells = <1>; 49 #size-cells = <1>; 50 compatible = "jedec,spi-nor"; 51 spi-max-frequency = <80000000>; 52 spi-tx-bus-width = <1>; 53 spi-rx-bus-width = <4>; 54 }; 55 }; 56 57 &i2c1 { 58 clock-frequency = <384000>; 59 pinctrl-names = "default", "gpio"; 60 pinctrl-0 = <&pinctrl_i2c1>; 61 pinctrl-1 = <&pinctrl_i2c1_gpio>; 62 scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 63 sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 64 status = "okay"; 65 66 /* NXP SE97BTP with temperature sensor + eeprom */ 67 se97: temperature-sensor-eeprom@1b { 68 compatible = "nxp,se97", "jedec,jc-42.4-temp"; 69 reg = <0x1b>; 70 }; 71 72 pmic: pmic@25 { 73 reg = <0x25>; 74 compatible = "nxp,pca9450c"; 75 76 /* PMIC PCA9450 PMIC_nINT GPIO1_IO08 */ 77 pinctrl-0 = <&pinctrl_pmic>; 78 pinctrl-names = "default"; 79 interrupt-parent = <&gpio1>; 80 interrupts = <8 IRQ_TYPE_LEVEL_LOW>; 81 82 regulators { 83 /* V_0V85_SOC: 0.85 .. 0.95 */ 84 buck1_reg: BUCK1 { 85 regulator-name = "BUCK1"; 86 regulator-min-microvolt = <850000>; 87 regulator-max-microvolt = <950000>; 88 regulator-boot-on; 89 regulator-always-on; 90 regulator-ramp-delay = <3125>; 91 }; 92 93 /* VDD_ARM */ 94 buck2_reg: BUCK2 { 95 regulator-name = "BUCK2"; 96 regulator-min-microvolt = <850000>; 97 regulator-max-microvolt = <1000000>; 98 regulator-boot-on; 99 regulator-always-on; 100 nxp,dvs-run-voltage = <950000>; 101 nxp,dvs-standby-voltage = <850000>; 102 regulator-ramp-delay = <3125>; 103 }; 104 105 /* VCC3V3 -> VMMC, ... must not be changed */ 106 buck4_reg: BUCK4 { 107 regulator-name = "BUCK4"; 108 regulator-min-microvolt = <3300000>; 109 regulator-max-microvolt = <3300000>; 110 regulator-boot-on; 111 regulator-always-on; 112 }; 113 114 /* V_1V8 -> VQMMC, SPI-NOR, ... must not be changed */ 115 buck5_reg: BUCK5 { 116 regulator-name = "BUCK5"; 117 regulator-min-microvolt = <1800000>; 118 regulator-max-microvolt = <1800000>; 119 regulator-boot-on; 120 regulator-always-on; 121 }; 122 123 /* V_1V1 -> RAM, ... must not be changed */ 124 buck6_reg: BUCK6 { 125 regulator-name = "BUCK6"; 126 regulator-min-microvolt = <1100000>; 127 regulator-max-microvolt = <1100000>; 128 regulator-boot-on; 129 regulator-always-on; 130 }; 131 132 /* V_1V8_SNVS */ 133 ldo1_reg: LDO1 { 134 regulator-name = "LDO1"; 135 regulator-min-microvolt = <1800000>; 136 regulator-max-microvolt = <1800000>; 137 regulator-boot-on; 138 regulator-always-on; 139 }; 140 141 /* V_1V8_ANA */ 142 ldo3_reg: LDO3 { 143 regulator-name = "LDO3"; 144 regulator-min-microvolt = <1800000>; 145 regulator-max-microvolt = <1800000>; 146 regulator-boot-on; 147 regulator-always-on; 148 }; 149 150 /* unused */ 151 ldo4_reg: LDO4 { 152 regulator-name = "LDO4"; 153 regulator-min-microvolt = <800000>; 154 regulator-max-microvolt = <3300000>; 155 }; 156 157 /* VCC SD IO - switched using SD2 VSELECT */ 158 ldo5_reg: LDO5 { 159 regulator-name = "LDO5"; 160 regulator-min-microvolt = <1800000>; 161 regulator-max-microvolt = <3300000>; 162 }; 163 }; 164 }; 165 166 pcf85063: rtc@51 { 167 compatible = "nxp,pcf85063a"; 168 reg = <0x51>; 169 }; 170 171 at24c02: eeprom@53 { 172 compatible = "nxp,se97b", "atmel,24c02"; 173 read-only; 174 reg = <0x53>; 175 pagesize = <16>; 176 vcc-supply = <®_vcc3v3>; 177 }; 178 179 m24c64: eeprom@57 { 180 compatible = "atmel,24c64"; 181 reg = <0x57>; 182 pagesize = <32>; 183 vcc-supply = <®_vcc3v3>; 184 }; 185 }; 186 187 &usdhc3 { 188 pinctrl-names = "default", "state_100mhz", "state_200mhz"; 189 pinctrl-0 = <&pinctrl_usdhc3>; 190 pinctrl-1 = <&pinctrl_usdhc3_100mhz>; 191 pinctrl-2 = <&pinctrl_usdhc3_200mhz>; 192 bus-width = <8>; 193 non-removable; 194 no-sd; 195 no-sdio; 196 vmmc-supply = <®_vcc3v3>; 197 vqmmc-supply = <®_vcc1v8>; 198 status = "okay"; 199 }; 200 201 &wdog1 { 202 pinctrl-names = "default"; 203 pinctrl-0 = <&pinctrl_wdog>; 204 fsl,ext-reset-output; 205 status = "okay"; 206 }; 207 208 &iomuxc { 209 pinctrl_flexspi0: flexspi0grp { 210 fsl,pins = <MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x142>, 211 <MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82>, 212 <MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82>, 213 <MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82>, 214 <MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82>, 215 <MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82>; 216 }; 217 218 pinctrl_i2c1: i2c1grp { 219 fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001e2>, 220 <MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001e2>; 221 }; 222 223 pinctrl_i2c1_gpio: i2c1-gpiogrp { 224 fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x400001e2>, 225 <MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x400001e2>; 226 }; 227 228 pinctrl_pmic: pmicirqgrp { 229 fsl,pins = <MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x1c0>; 230 }; 231 232 pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { 233 fsl,pins = <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x10>; 234 }; 235 236 pinctrl_usdhc3: usdhc3grp { 237 fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194>, 238 <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4>, 239 <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4>, 240 <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4>, 241 <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4>, 242 <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4>, 243 <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4>, 244 <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4>, 245 <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4>, 246 <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4>, 247 <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x84>, 248 <MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x84>; 249 }; 250 251 pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { 252 fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194>, 253 <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4>, 254 <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4>, 255 <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4>, 256 <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4>, 257 <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4>, 258 <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4>, 259 <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4>, 260 <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4>, 261 <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4>, 262 <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x84>, 263 <MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x84>; 264 }; 265 266 pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { 267 fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194>, 268 <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4>, 269 <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4>, 270 <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4>, 271 <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4>, 272 <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4>, 273 <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4>, 274 <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4>, 275 <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4>, 276 <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4>, 277 <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x84>, 278 <MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x84>; 279 }; 280 281 pinctrl_wdog: wdoggrp { 282 fsl,pins = <MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x1c4>; 283 }; 284 };
Cache object: eb8a57bce3f1610c449b1be3033afc70
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]