Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/marvell/armada-3720-turris-mox.dts
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2 /* 3 * Device Tree file for CZ.NIC Turris Mox Board 4 * 2019 by Marek Behún <kabel@kernel.org> 5 */ 6 7 /dts-v1/; 8 9 #include <dt-bindings/bus/moxtet.h> 10 #include <dt-bindings/gpio/gpio.h> 11 #include <dt-bindings/input/input.h> 12 #include "armada-372x.dtsi" 13 14 / { 15 model = "CZ.NIC Turris Mox Board"; 16 compatible = "cznic,turris-mox", "marvell,armada3720", 17 "marvell,armada3710"; 18 19 aliases { 20 spi0 = &spi0; 21 ethernet0 = ð0; 22 ethernet1 = ð1; 23 mmc0 = &sdhci0; 24 mmc1 = &sdhci1; 25 }; 26 27 chosen { 28 stdout-path = "serial0:115200n8"; 29 }; 30 31 memory@0 { 32 device_type = "memory"; 33 reg = <0x00000000 0x00000000 0x00000000 0x20000000>; 34 }; 35 36 leds { 37 compatible = "gpio-leds"; 38 led { 39 label = "mox:red:activity"; 40 gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>; 41 linux,default-trigger = "default-on"; 42 }; 43 }; 44 45 gpio-keys { 46 compatible = "gpio-keys"; 47 48 key-reset { 49 label = "reset"; 50 linux,code = <KEY_RESTART>; 51 gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>; 52 debounce-interval = <60>; 53 }; 54 }; 55 56 exp_usb3_vbus: usb3-vbus { 57 compatible = "regulator-fixed"; 58 regulator-name = "usb3-vbus"; 59 regulator-min-microvolt = <5000000>; 60 regulator-max-microvolt = <5000000>; 61 enable-active-high; 62 regulator-always-on; 63 gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>; 64 }; 65 66 vsdc_reg: vsdc-reg { 67 compatible = "regulator-gpio"; 68 regulator-name = "vsdc"; 69 regulator-min-microvolt = <1800000>; 70 regulator-max-microvolt = <3300000>; 71 regulator-boot-on; 72 73 gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>; 74 gpios-states = <0>; 75 states = <1800000 0x1 76 3300000 0x0>; 77 enable-active-high; 78 }; 79 80 vsdio_reg: vsdio-reg { 81 compatible = "regulator-gpio"; 82 regulator-name = "vsdio"; 83 regulator-min-microvolt = <1800000>; 84 regulator-max-microvolt = <3300000>; 85 regulator-boot-on; 86 87 gpios = <&gpiosb 22 GPIO_ACTIVE_HIGH>; 88 gpios-states = <0>; 89 states = <1800000 0x1 90 3300000 0x0>; 91 enable-active-high; 92 }; 93 94 sdhci1_pwrseq: sdhci1-pwrseq { 95 compatible = "mmc-pwrseq-simple"; 96 reset-gpios = <&gpionb 19 GPIO_ACTIVE_HIGH>; 97 status = "okay"; 98 }; 99 100 sfp: sfp { 101 compatible = "sff,sfp"; 102 i2c-bus = <&i2c0>; 103 los-gpios = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>; 104 tx-fault-gpios = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>; 105 mod-def0-gpios = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>; 106 tx-disable-gpios = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>; 107 rate-select0-gpios = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>; 108 maximum-power-milliwatt = <3000>; 109 110 /* enabled by U-Boot if SFP module is present */ 111 status = "disabled"; 112 }; 113 114 firmware { 115 armada-3700-rwtm { 116 compatible = "marvell,armada-3700-rwtm-firmware", "cznic,turris-mox-rwtm"; 117 }; 118 }; 119 }; 120 121 &i2c0 { 122 pinctrl-names = "default"; 123 pinctrl-0 = <&i2c1_pins>; 124 clock-frequency = <100000>; 125 /delete-property/ mrvl,i2c-fast-mode; 126 status = "okay"; 127 128 rtc@6f { 129 compatible = "microchip,mcp7940x"; 130 reg = <0x6f>; 131 }; 132 }; 133 134 &pcie0 { 135 pinctrl-names = "default"; 136 pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; 137 status = "okay"; 138 reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; 139 /* 140 * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property 141 * contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and 142 * 2 size cells and also expects that the second range starts at 16 MB offset. Also it 143 * expects that first range uses same address for PCI (child) and CPU (parent) cells (so 144 * no remapping) and that this address is the lowest from all specified ranges. If these 145 * conditions are not met then U-Boot crashes during loading kernel DTB file. PCIe address 146 * space is 128 MB long, so the best split between MEM and IO is to use fixed 16 MB window 147 * for IO and the rest 112 MB (64+32+16) for MEM, despite that maximal IO size is just 64 kB. 148 * This bug is not present in U-Boot ports for other Armada 3700 devices and is fixed in 149 * U-Boot version 2021.07. See relevant U-Boot commits (the last one contains fix): 150 * https://source.denx.de/u-boot/u-boot/-/commit/cb2ddb291ee6fcbddd6d8f4ff49089dfe580f5d7 151 * https://source.denx.de/u-boot/u-boot/-/commit/c64ac3b3185aeb3846297ad7391fc6df8ecd73bf 152 * https://source.denx.de/u-boot/u-boot/-/commit/4a82fca8e330157081fc132a591ebd99ba02ee33 153 * Bug related to requirement of same child and parent addresses for first range is fixed 154 * in U-Boot version 2022.04 by following commit: 155 * https://source.denx.de/u-boot/u-boot/-/commit/1fd54253bca7d43d046bba4853fe5fafd034bc17 156 */ 157 #address-cells = <3>; 158 #size-cells = <2>; 159 ranges = <0x81000000 0 0xe8000000 0 0xe8000000 0 0x01000000 /* Port 0 IO */ 160 0x82000000 0 0xe9000000 0 0xe9000000 0 0x07000000>; /* Port 0 MEM */ 161 162 /* enabled by U-Boot if PCIe module is present */ 163 status = "disabled"; 164 }; 165 166 &uart0 { 167 status = "okay"; 168 }; 169 170 ð0 { 171 pinctrl-names = "default"; 172 pinctrl-0 = <&rgmii_pins>; 173 phy-mode = "rgmii-id"; 174 phy-handle = <&phy1>; 175 status = "okay"; 176 }; 177 178 ð1 { 179 phy-mode = "2500base-x"; 180 managed = "in-band-status"; 181 phys = <&comphy0 1>; 182 }; 183 184 &sdhci0 { 185 wp-inverted; 186 bus-width = <4>; 187 cd-gpios = <&gpionb 10 GPIO_ACTIVE_HIGH>; 188 vqmmc-supply = <&vsdc_reg>; 189 marvell,pad-type = "sd"; 190 status = "okay"; 191 }; 192 193 &sdhci1 { 194 pinctrl-names = "default"; 195 pinctrl-0 = <&sdio_pins>; 196 non-removable; 197 bus-width = <4>; 198 marvell,pad-type = "sd"; 199 vqmmc-supply = <&vsdio_reg>; 200 mmc-pwrseq = <&sdhci1_pwrseq>; 201 /* forbid SDR104 for FCC purposes */ 202 sdhci-caps-mask = <0x2 0x0>; 203 status = "okay"; 204 }; 205 206 &spi0 { 207 status = "okay"; 208 pinctrl-names = "default"; 209 pinctrl-0 = <&spi_quad_pins &spi_cs1_pins>; 210 assigned-clocks = <&nb_periph_clk 7>; 211 assigned-clock-parents = <&tbg 1>; 212 assigned-clock-rates = <20000000>; 213 214 flash@0 { 215 #address-cells = <1>; 216 #size-cells = <1>; 217 compatible = "jedec,spi-nor"; 218 reg = <0>; 219 spi-max-frequency = <20000000>; 220 221 partitions { 222 compatible = "fixed-partitions"; 223 #address-cells = <1>; 224 #size-cells = <1>; 225 226 partition@0 { 227 label = "secure-firmware"; 228 reg = <0x0 0x20000>; 229 }; 230 231 partition@20000 { 232 label = "a53-firmware"; 233 reg = <0x20000 0x160000>; 234 }; 235 236 partition@180000 { 237 label = "u-boot-env"; 238 reg = <0x180000 0x10000>; 239 }; 240 241 partition@190000 { 242 label = "Rescue system"; 243 reg = <0x190000 0x660000>; 244 }; 245 246 partition@7f0000 { 247 label = "dtb"; 248 reg = <0x7f0000 0x10000>; 249 }; 250 }; 251 }; 252 253 moxtet: moxtet@1 { 254 #address-cells = <1>; 255 #size-cells = <0>; 256 compatible = "cznic,moxtet"; 257 reg = <1>; 258 reset-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>; 259 spi-max-frequency = <10000000>; 260 spi-cpol; 261 spi-cpha; 262 interrupt-controller; 263 #interrupt-cells = <1>; 264 interrupt-parent = <&gpiosb>; 265 interrupts = <5 IRQ_TYPE_EDGE_FALLING>; 266 status = "okay"; 267 268 moxtet_sfp: gpio@0 { 269 compatible = "cznic,moxtet-gpio"; 270 gpio-controller; 271 #gpio-cells = <2>; 272 reg = <0>; 273 status = "disabled"; 274 }; 275 }; 276 }; 277 278 &usb2 { 279 status = "okay"; 280 }; 281 282 &comphy2 { 283 connector { 284 compatible = "usb-a-connector"; 285 phy-supply = <&exp_usb3_vbus>; 286 }; 287 }; 288 289 &usb3 { 290 status = "okay"; 291 phys = <&comphy2 0>; 292 }; 293 294 &mdio { 295 pinctrl-names = "default"; 296 pinctrl-0 = <&smi_pins>; 297 status = "okay"; 298 299 phy1: ethernet-phy@1 { 300 reg = <1>; 301 }; 302 303 /* switch nodes are enabled by U-Boot if modules are present */ 304 switch0@10 { 305 compatible = "marvell,mv88e6190"; 306 reg = <0x10>; 307 dsa,member = <0 0>; 308 interrupt-parent = <&moxtet>; 309 interrupts = <MOXTET_IRQ_PERIDOT(0)>; 310 status = "disabled"; 311 312 mdio { 313 #address-cells = <1>; 314 #size-cells = <0>; 315 316 switch0phy1: switch0phy1@1 { 317 reg = <0x1>; 318 }; 319 320 switch0phy2: switch0phy2@2 { 321 reg = <0x2>; 322 }; 323 324 switch0phy3: switch0phy3@3 { 325 reg = <0x3>; 326 }; 327 328 switch0phy4: switch0phy4@4 { 329 reg = <0x4>; 330 }; 331 332 switch0phy5: switch0phy5@5 { 333 reg = <0x5>; 334 }; 335 336 switch0phy6: switch0phy6@6 { 337 reg = <0x6>; 338 }; 339 340 switch0phy7: switch0phy7@7 { 341 reg = <0x7>; 342 }; 343 344 switch0phy8: switch0phy8@8 { 345 reg = <0x8>; 346 }; 347 }; 348 349 ports { 350 #address-cells = <1>; 351 #size-cells = <0>; 352 353 port@1 { 354 reg = <0x1>; 355 label = "lan1"; 356 phy-handle = <&switch0phy1>; 357 }; 358 359 port@2 { 360 reg = <0x2>; 361 label = "lan2"; 362 phy-handle = <&switch0phy2>; 363 }; 364 365 port@3 { 366 reg = <0x3>; 367 label = "lan3"; 368 phy-handle = <&switch0phy3>; 369 }; 370 371 port@4 { 372 reg = <0x4>; 373 label = "lan4"; 374 phy-handle = <&switch0phy4>; 375 }; 376 377 port@5 { 378 reg = <0x5>; 379 label = "lan5"; 380 phy-handle = <&switch0phy5>; 381 }; 382 383 port@6 { 384 reg = <0x6>; 385 label = "lan6"; 386 phy-handle = <&switch0phy6>; 387 }; 388 389 port@7 { 390 reg = <0x7>; 391 label = "lan7"; 392 phy-handle = <&switch0phy7>; 393 }; 394 395 port@8 { 396 reg = <0x8>; 397 label = "lan8"; 398 phy-handle = <&switch0phy8>; 399 }; 400 401 port@9 { 402 reg = <0x9>; 403 label = "cpu"; 404 ethernet = <ð1>; 405 phy-mode = "2500base-x"; 406 managed = "in-band-status"; 407 }; 408 409 switch0port10: port@a { 410 reg = <0xa>; 411 label = "dsa"; 412 phy-mode = "2500base-x"; 413 managed = "in-band-status"; 414 link = <&switch1port9 &switch2port9>; 415 status = "disabled"; 416 }; 417 418 port-sfp@a { 419 reg = <0xa>; 420 label = "sfp"; 421 sfp = <&sfp>; 422 phy-mode = "sgmii"; 423 managed = "in-band-status"; 424 status = "disabled"; 425 }; 426 }; 427 }; 428 429 switch0@2 { 430 compatible = "marvell,mv88e6085"; 431 reg = <0x2>; 432 dsa,member = <0 0>; 433 interrupt-parent = <&moxtet>; 434 interrupts = <MOXTET_IRQ_TOPAZ>; 435 status = "disabled"; 436 437 mdio { 438 #address-cells = <1>; 439 #size-cells = <0>; 440 441 switch0phy1_topaz: switch0phy1@11 { 442 reg = <0x11>; 443 }; 444 445 switch0phy2_topaz: switch0phy2@12 { 446 reg = <0x12>; 447 }; 448 449 switch0phy3_topaz: switch0phy3@13 { 450 reg = <0x13>; 451 }; 452 453 switch0phy4_topaz: switch0phy4@14 { 454 reg = <0x14>; 455 }; 456 }; 457 458 ports { 459 #address-cells = <1>; 460 #size-cells = <0>; 461 462 port@1 { 463 reg = <0x1>; 464 label = "lan1"; 465 phy-handle = <&switch0phy1_topaz>; 466 }; 467 468 port@2 { 469 reg = <0x2>; 470 label = "lan2"; 471 phy-handle = <&switch0phy2_topaz>; 472 }; 473 474 port@3 { 475 reg = <0x3>; 476 label = "lan3"; 477 phy-handle = <&switch0phy3_topaz>; 478 }; 479 480 port@4 { 481 reg = <0x4>; 482 label = "lan4"; 483 phy-handle = <&switch0phy4_topaz>; 484 }; 485 486 port@5 { 487 reg = <0x5>; 488 label = "cpu"; 489 phy-mode = "2500base-x"; 490 managed = "in-band-status"; 491 ethernet = <ð1>; 492 }; 493 }; 494 }; 495 496 switch1@11 { 497 compatible = "marvell,mv88e6190"; 498 reg = <0x11>; 499 dsa,member = <0 1>; 500 interrupt-parent = <&moxtet>; 501 interrupts = <MOXTET_IRQ_PERIDOT(1)>; 502 status = "disabled"; 503 504 mdio { 505 #address-cells = <1>; 506 #size-cells = <0>; 507 508 switch1phy1: switch1phy1@1 { 509 reg = <0x1>; 510 }; 511 512 switch1phy2: switch1phy2@2 { 513 reg = <0x2>; 514 }; 515 516 switch1phy3: switch1phy3@3 { 517 reg = <0x3>; 518 }; 519 520 switch1phy4: switch1phy4@4 { 521 reg = <0x4>; 522 }; 523 524 switch1phy5: switch1phy5@5 { 525 reg = <0x5>; 526 }; 527 528 switch1phy6: switch1phy6@6 { 529 reg = <0x6>; 530 }; 531 532 switch1phy7: switch1phy7@7 { 533 reg = <0x7>; 534 }; 535 536 switch1phy8: switch1phy8@8 { 537 reg = <0x8>; 538 }; 539 }; 540 541 ports { 542 #address-cells = <1>; 543 #size-cells = <0>; 544 545 port@1 { 546 reg = <0x1>; 547 label = "lan9"; 548 phy-handle = <&switch1phy1>; 549 }; 550 551 port@2 { 552 reg = <0x2>; 553 label = "lan10"; 554 phy-handle = <&switch1phy2>; 555 }; 556 557 port@3 { 558 reg = <0x3>; 559 label = "lan11"; 560 phy-handle = <&switch1phy3>; 561 }; 562 563 port@4 { 564 reg = <0x4>; 565 label = "lan12"; 566 phy-handle = <&switch1phy4>; 567 }; 568 569 port@5 { 570 reg = <0x5>; 571 label = "lan13"; 572 phy-handle = <&switch1phy5>; 573 }; 574 575 port@6 { 576 reg = <0x6>; 577 label = "lan14"; 578 phy-handle = <&switch1phy6>; 579 }; 580 581 port@7 { 582 reg = <0x7>; 583 label = "lan15"; 584 phy-handle = <&switch1phy7>; 585 }; 586 587 port@8 { 588 reg = <0x8>; 589 label = "lan16"; 590 phy-handle = <&switch1phy8>; 591 }; 592 593 switch1port9: port@9 { 594 reg = <0x9>; 595 label = "dsa"; 596 phy-mode = "2500base-x"; 597 managed = "in-band-status"; 598 link = <&switch0port10>; 599 }; 600 601 switch1port10: port@a { 602 reg = <0xa>; 603 label = "dsa"; 604 phy-mode = "2500base-x"; 605 managed = "in-band-status"; 606 link = <&switch2port9>; 607 status = "disabled"; 608 }; 609 610 port-sfp@a { 611 reg = <0xa>; 612 label = "sfp"; 613 sfp = <&sfp>; 614 phy-mode = "sgmii"; 615 managed = "in-band-status"; 616 status = "disabled"; 617 }; 618 }; 619 }; 620 621 switch1@2 { 622 compatible = "marvell,mv88e6085"; 623 reg = <0x2>; 624 dsa,member = <0 1>; 625 interrupt-parent = <&moxtet>; 626 interrupts = <MOXTET_IRQ_TOPAZ>; 627 status = "disabled"; 628 629 mdio { 630 #address-cells = <1>; 631 #size-cells = <0>; 632 633 switch1phy1_topaz: switch1phy1@11 { 634 reg = <0x11>; 635 }; 636 637 switch1phy2_topaz: switch1phy2@12 { 638 reg = <0x12>; 639 }; 640 641 switch1phy3_topaz: switch1phy3@13 { 642 reg = <0x13>; 643 }; 644 645 switch1phy4_topaz: switch1phy4@14 { 646 reg = <0x14>; 647 }; 648 }; 649 650 ports { 651 #address-cells = <1>; 652 #size-cells = <0>; 653 654 port@1 { 655 reg = <0x1>; 656 label = "lan9"; 657 phy-handle = <&switch1phy1_topaz>; 658 }; 659 660 port@2 { 661 reg = <0x2>; 662 label = "lan10"; 663 phy-handle = <&switch1phy2_topaz>; 664 }; 665 666 port@3 { 667 reg = <0x3>; 668 label = "lan11"; 669 phy-handle = <&switch1phy3_topaz>; 670 }; 671 672 port@4 { 673 reg = <0x4>; 674 label = "lan12"; 675 phy-handle = <&switch1phy4_topaz>; 676 }; 677 678 port@5 { 679 reg = <0x5>; 680 label = "dsa"; 681 phy-mode = "2500base-x"; 682 managed = "in-band-status"; 683 link = <&switch0port10>; 684 }; 685 }; 686 }; 687 688 switch2@12 { 689 compatible = "marvell,mv88e6190"; 690 reg = <0x12>; 691 dsa,member = <0 2>; 692 interrupt-parent = <&moxtet>; 693 interrupts = <MOXTET_IRQ_PERIDOT(2)>; 694 status = "disabled"; 695 696 mdio { 697 #address-cells = <1>; 698 #size-cells = <0>; 699 700 switch2phy1: switch2phy1@1 { 701 reg = <0x1>; 702 }; 703 704 switch2phy2: switch2phy2@2 { 705 reg = <0x2>; 706 }; 707 708 switch2phy3: switch2phy3@3 { 709 reg = <0x3>; 710 }; 711 712 switch2phy4: switch2phy4@4 { 713 reg = <0x4>; 714 }; 715 716 switch2phy5: switch2phy5@5 { 717 reg = <0x5>; 718 }; 719 720 switch2phy6: switch2phy6@6 { 721 reg = <0x6>; 722 }; 723 724 switch2phy7: switch2phy7@7 { 725 reg = <0x7>; 726 }; 727 728 switch2phy8: switch2phy8@8 { 729 reg = <0x8>; 730 }; 731 }; 732 733 ports { 734 #address-cells = <1>; 735 #size-cells = <0>; 736 737 port@1 { 738 reg = <0x1>; 739 label = "lan17"; 740 phy-handle = <&switch2phy1>; 741 }; 742 743 port@2 { 744 reg = <0x2>; 745 label = "lan18"; 746 phy-handle = <&switch2phy2>; 747 }; 748 749 port@3 { 750 reg = <0x3>; 751 label = "lan19"; 752 phy-handle = <&switch2phy3>; 753 }; 754 755 port@4 { 756 reg = <0x4>; 757 label = "lan20"; 758 phy-handle = <&switch2phy4>; 759 }; 760 761 port@5 { 762 reg = <0x5>; 763 label = "lan21"; 764 phy-handle = <&switch2phy5>; 765 }; 766 767 port@6 { 768 reg = <0x6>; 769 label = "lan22"; 770 phy-handle = <&switch2phy6>; 771 }; 772 773 port@7 { 774 reg = <0x7>; 775 label = "lan23"; 776 phy-handle = <&switch2phy7>; 777 }; 778 779 port@8 { 780 reg = <0x8>; 781 label = "lan24"; 782 phy-handle = <&switch2phy8>; 783 }; 784 785 switch2port9: port@9 { 786 reg = <0x9>; 787 label = "dsa"; 788 phy-mode = "2500base-x"; 789 managed = "in-band-status"; 790 link = <&switch1port10 &switch0port10>; 791 }; 792 793 port-sfp@a { 794 reg = <0xa>; 795 label = "sfp"; 796 sfp = <&sfp>; 797 phy-mode = "sgmii"; 798 managed = "in-band-status"; 799 status = "disabled"; 800 }; 801 }; 802 }; 803 804 switch2@2 { 805 compatible = "marvell,mv88e6085"; 806 reg = <0x2>; 807 dsa,member = <0 2>; 808 interrupt-parent = <&moxtet>; 809 interrupts = <MOXTET_IRQ_TOPAZ>; 810 status = "disabled"; 811 812 mdio { 813 #address-cells = <1>; 814 #size-cells = <0>; 815 816 switch2phy1_topaz: switch2phy1@11 { 817 reg = <0x11>; 818 }; 819 820 switch2phy2_topaz: switch2phy2@12 { 821 reg = <0x12>; 822 }; 823 824 switch2phy3_topaz: switch2phy3@13 { 825 reg = <0x13>; 826 }; 827 828 switch2phy4_topaz: switch2phy4@14 { 829 reg = <0x14>; 830 }; 831 }; 832 833 ports { 834 #address-cells = <1>; 835 #size-cells = <0>; 836 837 port@1 { 838 reg = <0x1>; 839 label = "lan17"; 840 phy-handle = <&switch2phy1_topaz>; 841 }; 842 843 port@2 { 844 reg = <0x2>; 845 label = "lan18"; 846 phy-handle = <&switch2phy2_topaz>; 847 }; 848 849 port@3 { 850 reg = <0x3>; 851 label = "lan19"; 852 phy-handle = <&switch2phy3_topaz>; 853 }; 854 855 port@4 { 856 reg = <0x4>; 857 label = "lan20"; 858 phy-handle = <&switch2phy4_topaz>; 859 }; 860 861 port@5 { 862 reg = <0x5>; 863 label = "dsa"; 864 phy-mode = "2500base-x"; 865 managed = "in-band-status"; 866 link = <&switch1port10 &switch0port10>; 867 }; 868 }; 869 }; 870 };
Cache object: 781e2824a06314187c73740a73fbdb9f
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]