Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/qcom/msm8994-msft-lumia-octagon.dtsi
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 // SPDX-License-Identifier: BSD-3-Clause 2 /* 3 * Common Board Device Tree for 4 * Microsoft Mobile MSM8994 Octagon Platforms 5 * 6 * Copyright (c) 2020, Konrad Dybcio 7 * Copyright (c) 2020, Gustave Monce <gustave.monce@outlook.com> 8 */ 9 10 #include "pm8994.dtsi" 11 #include "pmi8994.dtsi" 12 #include <dt-bindings/gpio/gpio.h> 13 #include <dt-bindings/input/gpio-keys.h> 14 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 15 16 /* 17 * Delete all generic (msm8994.dtsi) reserved 18 * memory mappings which are different in this device. 19 */ 20 /delete-node/ &adsp_mem; 21 /delete-node/ &audio_mem; 22 /delete-node/ &cont_splash_mem; 23 /delete-node/ &mba_mem; 24 /delete-node/ &mpss_mem; 25 /delete-node/ &peripheral_region; 26 /delete-node/ &rmtfs_mem; 27 /delete-node/ &smem_mem; 28 29 / { 30 /* 31 * Most Lumia 950/XL users use GRUB to load their kernels, 32 * hence there is no need for msm-id and friends. 33 */ 34 35 /* 36 * This enables graphical output via bootloader-enabled display. 37 * acpi=no is required due to WP platforms having ACPI support, but 38 * only for Windows-based OSes. 39 */ 40 chosen { 41 bootargs = "earlycon=efifb console=efifb acpi=no"; 42 43 #address-cells = <2>; 44 #size-cells = <2>; 45 ranges; 46 }; 47 48 clocks { 49 compatible = "simple-bus"; 50 51 divclk4: divclk4 { 52 compatible = "fixed-clock"; 53 #clock-cells = <0>; 54 55 clock-frequency = <32768>; 56 clock-output-names = "divclk4"; 57 58 pinctrl-names = "default"; 59 pinctrl-0 = <&divclk4_pin_a>; 60 }; 61 }; 62 63 gpio-keys { 64 compatible = "gpio-keys"; 65 autorepeat; 66 67 volup-key { 68 label = "Volume Up"; 69 gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>; 70 linux,input-type = <1>; 71 linux,code = <KEY_VOLUMEUP>; 72 wakeup-source; 73 debounce-interval = <15>; 74 }; 75 76 camsnap-key { 77 label = "Camera Snapshot"; 78 gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>; 79 linux,input-type = <1>; 80 linux,code = <KEY_CAMERA>; 81 wakeup-source; 82 debounce-interval = <15>; 83 }; 84 85 camfocus-key { 86 label = "Camera Focus"; 87 gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>; 88 linux,input-type = <1>; 89 linux,code = <KEY_VOLUMEUP>; 90 wakeup-source; 91 debounce-interval = <15>; 92 }; 93 }; 94 95 gpio-hall-sensor { 96 compatible = "gpio-keys"; 97 98 pinctrl-names = "default"; 99 pinctrl-0 = <&hall_front_default &hall_back_default>; 100 101 label = "GPIO Hall Effect Sensor"; 102 103 event-hall-front-sensor { 104 label = "Hall Effect Front Sensor"; 105 gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; 106 linux,input-type = <EV_SW>; 107 linux,code = <SW_LID>; 108 linux,can-disable; 109 }; 110 111 event-hall-back-sensor { 112 label = "Hall Effect Back Sensor"; 113 gpios = <&tlmm 75 GPIO_ACTIVE_HIGH>; 114 linux,input-type = <EV_SW>; 115 linux,code = <SW_MACHINE_COVER>; 116 linux,can-disable; 117 }; 118 }; 119 120 reserved-memory { 121 /* 122 * This device being a WP platform has a very different 123 * memory layout than other Android based devices. 124 * This memory layout is directly copied from the original 125 * device UEFI firmware, and adapted based on observations 126 * using JTAG for the Qualcomm Peripheral Image regions. 127 */ 128 129 uefi_mem: memory@200000 { 130 reg = <0 0x200000 0 0x100000>; 131 no-map; 132 }; 133 134 mppark_mem: memory@300000 { 135 reg = <0 0x300000 0 0x80000>; 136 no-map; 137 }; 138 139 fbpt_mem: memory@380000 { 140 reg = <0 0x380000 0 0x1000>; 141 no-map; 142 }; 143 144 dbg2_mem: memory@381000 { 145 reg = <0 0x381000 0 0x4000>; 146 no-map; 147 }; 148 149 capsule_mem: memory@385000 { 150 reg = <0 0x385000 0 0x1000>; 151 no-map; 152 }; 153 154 tpmctrl_mem: memory@386000 { 155 reg = <0 0x386000 0 0x3000>; 156 no-map; 157 }; 158 159 uefiinfo_mem: memory@389000 { 160 reg = <0 0x389000 0 0x1000>; 161 no-map; 162 }; 163 164 reset_mem: memory@389000 { 165 reg = <0 0x389000 0 0x1000>; 166 no-map; 167 }; 168 169 resuncached_mem: memory@38e000 { 170 reg = <0 0x38e000 0 0x72000>; 171 no-map; 172 }; 173 174 disp_mem: memory@400000 { 175 reg = <0 0x400000 0 0x800000>; 176 no-map; 177 }; 178 179 uefistack_mem: memory@c00000 { 180 reg = <0 0xc00000 0 0x40000>; 181 no-map; 182 }; 183 184 cpuvect_mem: memory@c40000 { 185 reg = <0 0xc40000 0 0x10000>; 186 no-map; 187 }; 188 189 rescached_mem: memory@400000 { 190 reg = <0 0xc50000 0 0xb0000>; 191 no-map; 192 }; 193 194 tzapps_mem: memory@6500000 { 195 reg = <0 0x6500000 0 0x500000>; 196 no-map; 197 }; 198 199 smem_mem: memory@6a00000 { 200 reg = <0 0x6a00000 0 0x200000>; 201 no-map; 202 }; 203 204 hyp_mem: memory@6c00000 { 205 reg = <0 0x6c00000 0 0x100000>; 206 no-map; 207 }; 208 209 tz_mem: memory@6d00000 { 210 reg = <0 0x6d00000 0 0x160000>; 211 no-map; 212 }; 213 214 rfsa_adsp_mem: memory@6e60000 { 215 reg = <0 0x6e60000 0 0x10000>; 216 no-map; 217 }; 218 219 rfsa_mpss_mem: memory@6e70000 { 220 compatible = "qcom,rmtfs-mem"; 221 reg = <0 0x6e70000 0 0x10000>; 222 no-map; 223 224 qcom,client-id = <1>; 225 }; 226 227 /* 228 * Value obtained from the device original ACPI DSDT table 229 * MPSS_EFS / SBL 230 */ 231 mba_mem: memory@6e80000 { 232 reg = <0 0x6e80000 0 0x180000>; 233 no-map; 234 }; 235 236 /* 237 * Peripheral Image loader region begin! 238 * The region reserved for pil is 0x7000000-0xef00000 239 */ 240 241 mpss_mem: memory@7000000 { 242 reg = <0 0x7000000 0 0x5a00000>; 243 no-map; 244 }; 245 246 adsp_mem: memory@ca00000 { 247 reg = <0 0xca00000 0 0x1800000>; 248 no-map; 249 }; 250 251 venus_mem: memory@e200000 { 252 reg = <0 0xe200000 0 0x500000>; 253 no-map; 254 }; 255 256 pil_metadata_mem: memory@e700000 { 257 reg = <0 0xe700000 0 0x4000>; 258 no-map; 259 }; 260 261 memory@e704000 { 262 reg = <0 0xe704000 0 0x7fc000>; 263 no-map; 264 }; 265 /* Peripheral Image loader region end */ 266 267 cnss_mem: memory@ef00000 { 268 reg = <0 0xef00000 0 0x300000>; 269 no-map; 270 }; 271 }; 272 }; 273 274 &blsp1_i2c1 { 275 status = "okay"; 276 277 rmi4-i2c-dev@4b { 278 compatible = "syna,rmi4-i2c"; 279 reg = <0x4b>; 280 #address-cells = <1>; 281 #size-cells = <0>; 282 283 interrupt-parent = <&tlmm>; 284 interrupts = <77 IRQ_TYPE_EDGE_FALLING>; 285 286 rmi4-f01@1 { 287 reg = <0x01>; 288 syna,nosleep-mode = <1>; 289 }; 290 291 rmi4-f12@12 { 292 reg = <0x12>; 293 syna,sensor-type = <1>; 294 syna,clip-x-low = <0>; 295 syna,clip-x-high = <1440>; 296 syna,clip-y-low = <0>; 297 syna,clip-y-high = <2560>; 298 }; 299 }; 300 }; 301 302 &blsp1_i2c2 { 303 status = "okay"; 304 305 /* 306 * This device uses the Texas Instruments TAS2553, however the TAS2552 driver 307 * seems to work here. In the future a proper driver might need to 308 * be written for this device. 309 */ 310 tas2553: tas2553@40 { 311 compatible = "ti,tas2552"; 312 reg = <0x40>; 313 314 vbat-supply = <&vph_pwr>; 315 iovdd-supply = <&vreg_s4a_1p8>; 316 avdd-supply = <&vreg_s4a_1p8>; 317 318 enable-gpio = <&pm8994_gpios 12 GPIO_ACTIVE_HIGH>; 319 }; 320 }; 321 322 &blsp1_i2c5 { 323 status = "okay"; 324 325 ak09912: magnetometer@c { 326 compatible = "asahi-kasei,ak09912"; 327 reg = <0xc>; 328 329 interrupt-parent = <&tlmm>; 330 interrupts = <26 IRQ_TYPE_EDGE_RISING>; 331 332 vdd-supply = <&vreg_l18a_2p85>; 333 vid-supply = <&vreg_lvs2a_1p8>; 334 }; 335 336 zpa2326: barometer@5c { 337 compatible = "murata,zpa2326"; 338 reg = <0x5c>; 339 340 interrupt-parent = <&tlmm>; 341 interrupts = <74 IRQ_TYPE_EDGE_RISING>; 342 343 vdd-supply = <&vreg_lvs2a_1p8>; 344 }; 345 346 mpu6050: accelerometer@68 { 347 compatible = "invensense,mpu6500"; 348 reg = <0x68>; 349 350 interrupt-parent = <&tlmm>; 351 interrupts = <64 IRQ_TYPE_EDGE_RISING>; 352 353 vdd-supply = <&vreg_lvs2a_1p8>; 354 vddio-supply = <&vreg_lvs2a_1p8>; 355 }; 356 }; 357 358 &blsp1_i2c6 { 359 status = "okay"; 360 361 pn547: pn547@28 { 362 compatible = "nxp,pn544-i2c"; 363 364 reg = <0x28>; 365 366 interrupt-parent = <&tlmm>; 367 interrupts = <29 IRQ_TYPE_EDGE_RISING>; 368 369 enable-gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>; 370 firmware-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; 371 }; 372 }; 373 374 &blsp1_uart2 { 375 status = "okay"; 376 }; 377 378 &blsp2_i2c1 { 379 status = "okay"; 380 381 sideinteraction: ad7147_captouch@2c { 382 compatible = "ad,ad7147_captouch"; 383 reg = <0x2c>; 384 385 pinctrl-names = "default", "sleep"; 386 pinctrl-0 = <&grip_default>; 387 pinctrl-1 = <&grip_sleep>; 388 389 interrupts = <&tlmm 96 IRQ_TYPE_EDGE_FALLING>; 390 391 button_num = <8>; 392 touchpad_num = <0>; 393 wheel_num = <0>; 394 slider_num = <0>; 395 396 vcc-supply = <&vreg_l18a_2p85>; 397 }; 398 399 /* 400 * The QPDS-T900/QPDS-T930 is a customized part built for Nokia 401 * by Avago. It is very similar to the Avago APDS-9930 with some 402 * minor differences. In the future a proper driver might need to 403 * be written for this device. For now this works fine. 404 */ 405 qpdst900: qpdst900@39 { 406 compatible = "avago,apds9930"; 407 reg = <0x39>; 408 409 interrupt-parent = <&tlmm>; 410 interrupts = <40 IRQ_TYPE_EDGE_FALLING>; 411 }; 412 }; 413 414 &blsp2_i2c5 { 415 status = "okay"; 416 417 fm_radio: si4705@11 { 418 compatible = "silabs,si470x"; 419 reg = <0x11>; 420 421 interrupt-parent = <&tlmm>; 422 interrupts = <9 IRQ_TYPE_EDGE_FALLING>; 423 reset-gpios = <&tlmm 93 GPIO_ACTIVE_HIGH>; 424 }; 425 426 vreg_lpddr_1p1: fan53526a@6c { 427 compatible = "fcs,fan53526"; 428 reg = <0x6c>; 429 430 regulator-min-microvolt = <1100000>; 431 regulator-max-microvolt = <1100000>; 432 vin-supply = <&vph_pwr>; 433 fcs,suspend-voltage-selector = <1>; 434 regulator-always-on; /* Turning off DDR power doesn't sound good. */ 435 }; 436 437 /* ANX7816 HDMI bridge (needs MDSS HDMI) */ 438 }; 439 440 &blsp2_spi4 { 441 status = "okay"; 442 443 /* 444 * This device is a Lattice UC120 USB-C PD PHY. 445 * It is actually a Lattice iCE40 FPGA pre-programmed by 446 * the device firmware with a specific bitstream 447 * enabling USB Type C PHY functionality. 448 * Communication is done via a proprietary protocol over SPI. 449 * 450 * TODO: Once a proper driver is available, replace this. 451 */ 452 uc120: ice5lp2k@0 { 453 compatible = "lattice,ice40-fpga-mgr"; 454 reg = <0>; 455 spi-max-frequency = <5000000>; 456 cdone-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; 457 reset-gpios = <&pmi8994_gpios 4 GPIO_ACTIVE_LOW>; 458 }; 459 }; 460 461 &blsp2_uart2 { 462 status = "okay"; 463 464 qca6174_bt: bluetooth { 465 compatible = "qcom,qca6174-bt"; 466 467 enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; 468 clocks = <&divclk4>; 469 }; 470 }; 471 472 &pm8994_gpios { 473 bt_en_gpios: bt-en-gpios-state { 474 pinconf { 475 pins = "gpio19"; 476 function = PMIC_GPIO_FUNC_NORMAL; 477 output-low; 478 power-source = <PM8994_GPIO_S4>; 479 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; 480 bias-pull-down; 481 }; 482 }; 483 484 divclk4_pin_a: divclk4-state { 485 pinconf { 486 pins = "gpio18"; 487 function = PMIC_GPIO_FUNC_FUNC2; 488 power-source = <PM8994_GPIO_S4>; 489 bias-disable; 490 }; 491 }; 492 }; 493 494 &pm8994_pon { 495 pwrkey { 496 compatible = "qcom,pm8941-pwrkey"; 497 interrupts = <0 8 0 IRQ_TYPE_EDGE_BOTH>; 498 debounce = <15625>; 499 linux,code = <KEY_POWER>; 500 }; 501 502 volwnkey { 503 compatible = "qcom,pm8941-resin"; 504 interrupts = <0 8 1 IRQ_TYPE_EDGE_BOTH>; 505 debounce = <15625>; 506 linux,code = <KEY_VOLUMEDOWN>; 507 }; 508 }; 509 510 &pmi8994_gpios { 511 pinctrl-0 = <&hd3ss460_pol &hd3ss460_amsel &hd3ss460_en>; 512 pinctrl-names = "default"; 513 514 /* 515 * This device uses a TI HD3SS460 Type-C MUX 516 * As this device has no driver currently, 517 * the configuration for USB Face Up is set-up here. 518 * 519 * TODO: remove once a driver is available 520 * TODO: add VBUS GPIO 5 521 */ 522 hd3ss460_pol: pol-low-state { 523 pins = "gpio8"; 524 function = PMIC_GPIO_FUNC_NORMAL; 525 qcom,drive-strength = <3>; 526 bias-pull-down; 527 }; 528 529 hd3ss460_amsel: amsel-high-state { 530 pins = "gpio9"; 531 function = PMIC_GPIO_FUNC_NORMAL; 532 qcom,drive-strength = <1>; 533 bias-pull-up; 534 }; 535 536 hd3ss460_en: en-high-state { 537 pins = "gpio10"; 538 function = PMIC_GPIO_FUNC_NORMAL; 539 qcom,drive-strength = <1>; 540 bias-pull-up; 541 }; 542 }; 543 544 &pmi8994_spmi_regulators { 545 vdd_gfx: s2@1700 { 546 reg = <0x1700 0x100>; 547 regulator-min-microvolt = <980000>; 548 regulator-max-microvolt = <980000>; 549 }; 550 }; 551 552 &rpm_requests { 553 /* These values were taken from the original firmware ACPI tables */ 554 pm8994_regulators: pm8994-regulators { 555 compatible = "qcom,rpm-pm8994-regulators"; 556 557 vdd_s1-supply = <&vph_pwr>; 558 vdd_s2-supply = <&vph_pwr>; 559 vdd_s3-supply = <&vph_pwr>; 560 vdd_s4-supply = <&vph_pwr>; 561 vdd_s5-supply = <&vph_pwr>; 562 vdd_s6-supply = <&vph_pwr>; 563 vdd_s7-supply = <&vph_pwr>; 564 vdd_s8-supply = <&vph_pwr>; 565 vdd_s9-supply = <&vph_pwr>; 566 vdd_s10-supply = <&vph_pwr>; 567 vdd_s11-supply = <&vph_pwr>; 568 vdd_s12-supply = <&vph_pwr>; 569 vdd_l1-supply = <&vreg_s1b_1p0>; 570 vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; 571 vdd_l3_l11-supply = <&vreg_s3a_1p3>; 572 vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; 573 vdd_l5_l7-supply = <&vreg_s5a_2p15>; 574 vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; 575 vdd_l8_l16_l30-supply = <&vph_pwr>; 576 vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; 577 vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; 578 vdd_l14_l15-supply = <&vreg_s5a_2p15>; 579 vdd_l17_l29-supply = <&vph_pwr_bbyp>; 580 vdd_l20_l21-supply = <&vph_pwr_bbyp>; 581 vdd_l25-supply = <&vreg_s5a_2p15>; 582 vdd_lvs1_2-supply = <&vreg_s4a_1p8>; 583 584 /* S1, S2, S6 and S12 are managed by RPMPD */ 585 586 vreg_s3a_1p3: s3 { 587 regulator-min-microvolt = <1300000>; 588 regulator-max-microvolt = <1300000>; 589 regulator-allow-set-load; 590 regulator-system-load = <300000>; 591 }; 592 593 vreg_s4a_1p8: s4 { 594 regulator-min-microvolt = <1800000>; 595 regulator-max-microvolt = <1800000>; 596 regulator-allow-set-load; 597 regulator-always-on; 598 regulator-system-load = <325000>; 599 }; 600 601 vreg_s5a_2p15: s5 { 602 regulator-min-microvolt = <2150000>; 603 regulator-max-microvolt = <2150000>; 604 regulator-allow-set-load; 605 regulator-system-load = <325000>; 606 }; 607 608 vreg_s7a_1p0: s7 { 609 regulator-min-microvolt = <1000000>; 610 regulator-max-microvolt = <1000000>; 611 }; 612 613 /* 614 * S8 - SPMI-managed VDD_APC0 615 * S9, S10 and S11 (the main one) - SPMI-managed VDD_APC1 616 */ 617 618 vreg_l1a_1p0: l1 { 619 regulator-min-microvolt = <1000000>; 620 regulator-max-microvolt = <1000000>; 621 }; 622 623 vreg_l2a_1p25: l2 { 624 regulator-min-microvolt = <1250000>; 625 regulator-max-microvolt = <1250000>; 626 regulator-allow-set-load; 627 regulator-system-load = <4160>; 628 }; 629 630 vreg_l3a_1p2: l3 { 631 regulator-min-microvolt = <1200000>; 632 regulator-max-microvolt = <1200000>; 633 regulator-always-on; 634 regulator-allow-set-load; 635 regulator-system-load = <80000>; 636 }; 637 638 vreg_l4a_1p225: l4 { 639 regulator-min-microvolt = <1225000>; 640 regulator-max-microvolt = <1225000>; 641 }; 642 643 /* L5 is inaccessible from RPM */ 644 645 vreg_l6a_1p8: l6 { 646 regulator-min-microvolt = <1800000>; 647 regulator-max-microvolt = <1800000>; 648 regulator-allow-set-load; 649 regulator-system-load = <1000>; 650 }; 651 652 /* L7 is inaccessible from RPM */ 653 654 vreg_l8a_1p8: l8 { 655 regulator-min-microvolt = <1800000>; 656 regulator-max-microvolt = <1800000>; 657 }; 658 659 vreg_l9a_1p8: l9 { 660 regulator-min-microvolt = <1800000>; 661 regulator-max-microvolt = <1800000>; 662 }; 663 664 vreg_l10a_1p8: l10 { 665 regulator-min-microvolt = <1800000>; 666 regulator-max-microvolt = <1800000>; 667 }; 668 669 vreg_l11a_1p2: l11 { 670 regulator-min-microvolt = <1200000>; 671 regulator-max-microvolt = <1200000>; 672 regulator-always-on; 673 regulator-allow-set-load; 674 regulator-system-load = <35000>; 675 }; 676 677 vreg_l12a_1p8: l12 { 678 regulator-min-microvolt = <1800000>; 679 regulator-max-microvolt = <1800000>; 680 regulator-always-on; 681 regulator-allow-set-load; 682 regulator-system-load = <50000>; 683 }; 684 685 vreg_l13a_2p95: l13 { 686 regulator-min-microvolt = <1850000>; 687 regulator-max-microvolt = <2950000>; 688 regulator-always-on; 689 regulator-allow-set-load; 690 regulator-system-load = <22000>; 691 }; 692 693 vreg_l14a_1p8: l14 { 694 regulator-min-microvolt = <1800000>; 695 regulator-max-microvolt = <1800000>; 696 regulator-always-on; 697 regulator-allow-set-load; 698 regulator-system-load = <52000>; 699 }; 700 701 vreg_l15a_1p8: l15 { 702 regulator-min-microvolt = <1800000>; 703 regulator-max-microvolt = <1800000>; 704 }; 705 706 vreg_l16a_2p7: l16 { 707 regulator-min-microvolt = <2700000>; 708 regulator-max-microvolt = <2700000>; 709 }; 710 711 vreg_l17a_2p7: l17 { 712 regulator-min-microvolt = <2800000>; 713 regulator-max-microvolt = <2800000>; 714 regulator-always-on; 715 regulator-allow-set-load; 716 regulator-system-load = <300000>; 717 }; 718 719 vreg_l18a_2p85: l18 { 720 regulator-min-microvolt = <2850000>; 721 regulator-max-microvolt = <2850000>; 722 regulator-always-on; 723 regulator-allow-set-load; 724 regulator-system-load = <600000>; 725 }; 726 727 vreg_l19a_3p3: l19 { 728 regulator-min-microvolt = <3300000>; 729 regulator-max-microvolt = <3300000>; 730 regulator-always-on; 731 regulator-allow-set-load; 732 regulator-system-load = <500000>; 733 }; 734 735 vreg_l20a_2p95: l20 { 736 regulator-min-microvolt = <2950000>; 737 regulator-max-microvolt = <2950000>; 738 regulator-always-on; 739 regulator-boot-on; 740 regulator-allow-set-load; 741 regulator-system-load = <570000>; 742 }; 743 744 vreg_l21a_2p95: l21 { 745 regulator-min-microvolt = <2950000>; 746 regulator-max-microvolt = <2950000>; 747 regulator-always-on; 748 regulator-allow-set-load; 749 regulator-system-load = <800000>; 750 }; 751 752 vreg_l22a_3p0: l22 { 753 regulator-min-microvolt = <3000000>; 754 regulator-max-microvolt = <3000000>; 755 regulator-always-on; 756 regulator-allow-set-load; 757 regulator-system-load = <150000>; 758 }; 759 760 vreg_l23a_2p8: l23 { 761 regulator-min-microvolt = <2850000>; 762 regulator-max-microvolt = <2850000>; 763 regulator-always-on; 764 regulator-allow-set-load; 765 regulator-system-load = <80000>; 766 }; 767 768 vreg_l24a_3p075: l24 { 769 regulator-min-microvolt = <3075000>; 770 regulator-max-microvolt = <3150000>; 771 regulator-allow-set-load; 772 regulator-system-load = <5800>; 773 }; 774 775 vreg_l25a_1p1: l25 { 776 regulator-min-microvolt = <1150000>; 777 regulator-max-microvolt = <1150000>; 778 regulator-always-on; 779 regulator-allow-set-load; 780 regulator-system-load = <80000>; 781 }; 782 783 vreg_l26a_1p0: l26 { 784 regulator-min-microvolt = <1000000>; 785 regulator-max-microvolt = <1000000>; 786 }; 787 788 vreg_l27a_1p05: l27 { 789 regulator-min-microvolt = <1000000>; 790 regulator-max-microvolt = <1000000>; 791 regulator-always-on; 792 regulator-allow-set-load; 793 regulator-system-load = <500000>; 794 }; 795 796 vreg_l28a_1p0: l28 { 797 regulator-min-microvolt = <1000000>; 798 regulator-max-microvolt = <1000000>; 799 regulator-always-on; 800 regulator-allow-set-load; 801 regulator-system-load = <26000>; 802 }; 803 804 vreg_l29a_2p8: l29 { 805 regulator-min-microvolt = <2850000>; 806 regulator-max-microvolt = <2850000>; 807 regulator-always-on; 808 regulator-allow-set-load; 809 regulator-system-load = <80000>; 810 }; 811 812 vreg_l30a_1p8: l30 { 813 regulator-min-microvolt = <1800000>; 814 regulator-max-microvolt = <1800000>; 815 regulator-always-on; 816 regulator-allow-set-load; 817 regulator-system-load = <2500>; 818 }; 819 820 vreg_l31a_1p2: l31 { 821 regulator-min-microvolt = <1200000>; 822 regulator-max-microvolt = <1200000>; 823 regulator-always-on; 824 regulator-allow-set-load; 825 regulator-system-load = <600000>; 826 }; 827 828 vreg_l32a_1p8: l32 { 829 regulator-min-microvolt = <1800000>; 830 regulator-max-microvolt = <1800000>; 831 }; 832 833 vreg_lvs1a_1p8: lvs1 { }; 834 835 vreg_lvs2a_1p8: lvs2 { }; 836 }; 837 838 pmi8994_regulators: pmi8994-regulators { 839 compatible = "qcom,rpm-pmi8994-regulators"; 840 841 vdd_s1-supply = <&vph_pwr>; 842 vdd_bst_byp-supply = <&vph_pwr>; 843 844 vreg_s1b_1p0: s1 { 845 regulator-min-microvolt = <1025000>; 846 regulator-max-microvolt = <1025000>; 847 }; 848 849 /* S2 & S3 - VDD_GFX */ 850 851 vph_pwr_bbyp: boost-bypass { 852 regulator-min-microvolt = <3300000>; 853 regulator-max-microvolt = <3300000>; 854 }; 855 }; 856 }; 857 858 &sdhc1 { 859 status = "okay"; 860 861 /* 862 * This device is shipped with HS400 capabable eMMCs 863 * However various brands have been used in various product batches, 864 * including a Samsung eMMC (BGND3R) which features a quirk with HS400. 865 * Set the speed to HS200 as a safety measure. 866 */ 867 mmc-hs200-1_8v; 868 }; 869 870 &sdhc2 { 871 status = "okay"; 872 873 pinctrl-names = "default", "sleep"; 874 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; 875 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; 876 877 vmmc-supply = <&vreg_l21a_2p95>; 878 vqmmc-supply = <&vreg_l13a_2p95>; 879 880 cd-gpios = <&pm8994_gpios 8 GPIO_ACTIVE_LOW>; 881 }; 882 883 &tlmm { 884 grip_default: grip-default { 885 pins = "gpio39"; 886 function = "gpio"; 887 drive-strength = <6>; 888 bias-pull-down; 889 }; 890 891 grip_sleep: grip-sleep { 892 pins = "gpio39"; 893 function = "gpio"; 894 drive-strength = <2>; 895 bias-pull-down; 896 }; 897 898 hall_front_default: hall-front-default { 899 pins = "gpio42"; 900 function = "gpio"; 901 drive-strength = <2>; 902 bias-disable; 903 }; 904 905 hall_back_default: hall-back-default { 906 pins = "gpio75"; 907 function = "gpio"; 908 drive-strength = <2>; 909 bias-disable; 910 }; 911 };
Cache object: 6a22a3490ded8636052aad0cfdd2540c
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]