Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 // SPDX-License-Identifier: BSD-3-Clause 2 /* 3 * Copyright (c) 2021, AngeloGioacchino Del Regno 4 * <angelogioacchino.delregno@somainline.org> 5 * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> 6 */ 7 8 #include <dt-bindings/input/input.h> 9 #include <dt-bindings/leds/common.h> 10 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 11 #include "msm8998.dtsi" 12 #include "pm8005.dtsi" 13 #include "pm8998.dtsi" 14 #include "pmi8998.dtsi" 15 16 / { 17 /* required for bootloader to select correct board */ 18 qcom,msm-id = <0x124 0x20000>, <0x124 0x20001>; /* 8998v2, v2.1 */ 19 qcom,board-id = <8 0>; 20 21 clocks { 22 div1_mclk: divclk1 { 23 compatible = "gpio-gate-clock"; 24 pinctrl-0 = <&audio_mclk_pin>; 25 pinctrl-names = "default"; 26 clocks = <&rpmcc RPM_SMD_DIV_CLK1>; 27 #clock-cells = <0>; 28 enable-gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>; 29 }; 30 }; 31 32 board_vbat: vbat-regulator { 33 compatible = "regulator-fixed"; 34 regulator-name = "VBAT"; 35 36 regulator-min-microvolt = <4000000>; 37 regulator-max-microvolt = <4000000>; 38 regulator-always-on; 39 regulator-boot-on; 40 }; 41 42 cam0_vdig_vreg: cam0-vdig { 43 compatible = "regulator-fixed"; 44 regulator-name = "cam0_vdig"; 45 startup-delay-us = <0>; 46 enable-active-high; 47 gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>; 48 pinctrl-names = "default"; 49 pinctrl-0 = <&cam0_vdig_default>; 50 }; 51 52 cam1_vdig_vreg: cam1-vdig { 53 compatible = "regulator-fixed"; 54 regulator-name = "cam1_vdig"; 55 startup-delay-us = <0>; 56 enable-active-high; 57 gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; 58 pinctrl-names = "default"; 59 pinctrl-0 = <&cam1_vdig_default>; 60 vin-supply = <&vreg_s3a_1p35>; 61 }; 62 63 cam_vio_vreg: cam-vio-vreg { 64 compatible = "regulator-fixed"; 65 regulator-name = "cam_vio_vreg"; 66 startup-delay-us = <0>; 67 enable-active-high; 68 gpio = <&pmi8998_gpio 1 GPIO_ACTIVE_HIGH>; 69 pinctrl-names = "default"; 70 pinctrl-0 = <&cam_vio_default>; 71 vin-supply = <&vreg_lvs1a_1p8>; 72 }; 73 74 touch_vddio_vreg: touch-vddio-vreg { 75 compatible = "regulator-fixed"; 76 regulator-name = "touch_vddio_vreg"; 77 startup-delay-us = <10000>; 78 gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>; 79 pinctrl-names = "default"; 80 pinctrl-0 = <&ts_vddio_en>; 81 }; 82 83 vph_pwr: vph-pwr-regulator { 84 compatible = "regulator-fixed"; 85 regulator-name = "vph_pwr"; 86 regulator-always-on; 87 regulator-boot-on; 88 }; 89 90 extcon_usb: extcon-usb { 91 compatible = "linux,extcon-usb-gpio"; 92 id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>; 93 vbus-gpio = <&tlmm 128 GPIO_ACTIVE_HIGH>; 94 pinctrl-names = "default"; 95 pinctrl-0 = <&usb_extcon_active &usb_vbus_active>; 96 }; 97 98 gpio-keys { 99 compatible = "gpio-keys"; 100 label = "Side buttons"; 101 pinctrl-names = "default"; 102 pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>, 103 <&cam_snapshot_pin_a>; 104 button-vol-down { 105 label = "Volume Down"; 106 gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; 107 linux,input-type = <EV_KEY>; 108 linux,code = <KEY_VOLUMEDOWN>; 109 gpio-key,wakeup; 110 debounce-interval = <15>; 111 }; 112 113 button-camera-snapshot { 114 label = "Camera Snapshot"; 115 gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>; 116 linux,input-type = <EV_KEY>; 117 linux,code = <KEY_CAMERA>; 118 debounce-interval = <15>; 119 }; 120 121 button-camera-focus { 122 label = "Camera Focus"; 123 gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>; 124 linux,input-type = <EV_KEY>; 125 linux,code = <KEY_CAMERA_FOCUS>; 126 debounce-interval = <15>; 127 }; 128 }; 129 130 gpio-hall-sensor { 131 compatible = "gpio-keys"; 132 label = "Hall sensors"; 133 pinctrl-names = "default"; 134 pinctrl-0 = <&hall_sensor0_default>; 135 136 event-hall-sensor0 { 137 label = "Cover Hall Sensor"; 138 gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; 139 linux,input-type = <EV_SW>; 140 linux,code = <SW_LID>; 141 gpio-key,wakeup; 142 debounce-interval = <30>; 143 }; 144 }; 145 146 reserved-memory { 147 #address-cells = <2>; 148 #size-cells = <2>; 149 ranges; 150 151 hyp_mem: memory@85800000 { 152 reg = <0x0 0x85800000 0x0 0x3700000>; 153 no-map; 154 }; 155 156 cont_splash_mem: memory@9d400000 { 157 reg = <0x0 0x9d400000 0x0 0x2400000>; 158 no-map; 159 }; 160 161 zap_shader_region: memory@f6400000 { 162 compatible = "shared-dma-pool"; 163 reg = <0x0 0xf6400000 0x0 0x2000>; 164 no-map; 165 }; 166 167 adsp_region: memory@fe000000 { 168 reg = <0x0 0xfe000000 0x0 0x800000>; 169 no-map; 170 }; 171 172 qseecom_region: memory@fe800000 { 173 reg = <0x0 0xfe800000 0x0 0x1400000>; 174 no-map; 175 }; 176 177 ramoops@ffc00000 { 178 compatible = "ramoops"; 179 reg = <0x0 0xffc00000 0x0 0x100000>; 180 record-size = <0x10000>; 181 console-size = <0x60000>; 182 ftrace-size = <0x10000>; 183 pmsg-size = <0x20000>; 184 ecc-size = <16>; 185 }; 186 }; 187 188 vibrator { 189 compatible = "gpio-vibrator"; 190 enable-gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>; 191 pinctrl-names = "default"; 192 pinctrl-0 = <&vib_default>; 193 }; 194 }; 195 196 &blsp1_i2c5 { 197 status = "okay"; 198 clock-frequency = <355000>; 199 200 touchscreen@2c { 201 compatible = "syna,rmi4-i2c"; 202 reg = <0x2c>; 203 #address-cells = <1>; 204 #size-cells = <0>; 205 interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; 206 207 pinctrl-names = "default"; 208 pinctrl-0 = <&ts_int_n>; 209 210 vdd-supply = <&vreg_l28_3p0>; 211 vio-supply = <&touch_vddio_vreg>; 212 213 syna,reset-delay-ms = <220>; 214 syna,startup-delay-ms = <1000>; 215 216 rmi4-f01@1 { 217 reg = <0x01>; 218 syna,nosleep-mode = <1>; 219 }; 220 221 rmi4-f11@11 { 222 reg = <0x11>; 223 syna,sensor-type = <1>; 224 }; 225 }; 226 }; 227 228 &blsp1_i2c5_sleep { 229 bias-disable; 230 }; 231 232 &blsp1_uart3 { 233 status = "okay"; 234 235 bluetooth { 236 compatible = "qcom,wcn3990-bt"; 237 238 vddio-supply = <&vreg_s4a_1p8>; 239 vddxo-supply = <&vreg_l7a_1p8>; 240 vddrf-supply = <&vreg_l17a_1p3>; 241 vddch0-supply = <&vreg_l25a_3p3>; 242 max-speed = <3200000>; 243 244 clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>; 245 }; 246 }; 247 248 &blsp2_uart1 { 249 status = "okay"; 250 }; 251 252 &blsp2_i2c2 { 253 status = "okay"; 254 255 proximity@29 { 256 compatible = "st,vl53l0x"; 257 reg = <0x29>; 258 259 interrupt-parent = <&tlmm>; 260 interrupts = <22 IRQ_TYPE_EDGE_FALLING>; 261 262 reset-gpios = <&tlmm 27 GPIO_ACTIVE_LOW>; 263 vdd-supply = <&cam_vio_vreg>; 264 265 pinctrl-names = "default"; 266 pinctrl-0 = <&tof_int &tof_reset>; 267 }; 268 }; 269 270 &ibb { 271 regulator-min-microamp = <800000>; 272 regulator-max-microamp = <800000>; 273 regulator-enable-ramp-delay = <200>; 274 regulator-over-current-protection; 275 regulator-pull-down; 276 regulator-ramp-delay = <1>; 277 regulator-settling-time-up-us = <600>; 278 regulator-settling-time-down-us = <1000>; 279 regulator-soft-start; 280 qcom,discharge-resistor-kohms = <300>; 281 }; 282 283 &lab { 284 regulator-min-microamp = <200000>; 285 regulator-max-microamp = <200000>; 286 regulator-enable-ramp-delay = <500>; 287 regulator-over-current-protection; 288 regulator-pull-down; 289 regulator-ramp-delay = <1>; 290 regulator-settling-time-up-us = <50000>; 291 regulator-settling-time-down-us = <3000>; 292 regulator-soft-start; 293 }; 294 295 &pm8005_regulators { 296 /* VDD_GFX supply */ 297 pm8005_s1: s1 { 298 regulator-min-microvolt = <524000>; 299 regulator-max-microvolt = <1088000>; 300 regulator-enable-ramp-delay = <500>; 301 /* Hack until we rig up the gpu consumer */ 302 regulator-always-on; 303 }; 304 }; 305 306 &pm8998_gpio { 307 vol_down_pin_a: vol-down-active-state { 308 pins = "gpio5"; 309 function = PMIC_GPIO_FUNC_NORMAL; 310 bias-pull-up; 311 input-enable; 312 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; 313 }; 314 315 cam_focus_pin_a: cam-focus-btn-active-state { 316 pins = "gpio7"; 317 function = PMIC_GPIO_FUNC_NORMAL; 318 bias-pull-up; 319 input-enable; 320 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; 321 }; 322 323 cam_snapshot_pin_a: cam-snapshot-btn-active-state { 324 pins = "gpio8"; 325 function = PMIC_GPIO_FUNC_NORMAL; 326 bias-pull-up; 327 input-enable; 328 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; 329 }; 330 331 audio_mclk_pin: audio-mclk-pin-active-state { 332 pins = "gpio13"; 333 function = "func2"; 334 power-source = <0>; 335 }; 336 }; 337 338 &pmi8998_gpio { 339 cam_vio_default: cam-vio-active-state { 340 pins = "gpio1"; 341 function = PMIC_GPIO_FUNC_NORMAL; 342 bias-disable; 343 drive-push-pull; 344 output-low; 345 qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; 346 power-source = <1>; 347 }; 348 349 vib_default: vib-en-state { 350 pins = "gpio5"; 351 function = PMIC_GPIO_FUNC_NORMAL; 352 bias-disable; 353 drive-push-pull; 354 output-low; 355 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; 356 power-source = <0>; 357 }; 358 }; 359 360 &pm8998_pon { 361 resin { 362 compatible = "qcom,pm8941-resin"; 363 interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>; 364 debounce = <15625>; 365 bias-pull-up; 366 linux,code = <KEY_VOLUMEUP>; 367 }; 368 }; 369 370 &qusb2phy { 371 status = "okay"; 372 373 vdda-pll-supply = <&vreg_l12a_1p8>; 374 vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; 375 }; 376 377 &rpm_requests { 378 pm8998-regulators { 379 compatible = "qcom,rpm-pm8998-regulators"; 380 381 vdd_s1-supply = <&vph_pwr>; 382 vdd_s2-supply = <&vph_pwr>; 383 vdd_s3-supply = <&vph_pwr>; 384 vdd_s4-supply = <&vph_pwr>; 385 vdd_s5-supply = <&vph_pwr>; 386 vdd_s6-supply = <&vph_pwr>; 387 vdd_s7-supply = <&vph_pwr>; 388 vdd_s8-supply = <&vph_pwr>; 389 vdd_s9-supply = <&vph_pwr>; 390 vdd_s10-supply = <&vph_pwr>; 391 vdd_s11-supply = <&vph_pwr>; 392 vdd_s12-supply = <&vph_pwr>; 393 vdd_s13-supply = <&vph_pwr>; 394 vdd_l1_l27-supply = <&vreg_s7a_1p025>; 395 vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; 396 vdd_l3_l11-supply = <&vreg_s7a_1p025>; 397 vdd_l4_l5-supply = <&vreg_s7a_1p025>; 398 vdd_l6-supply = <&vreg_s5a_2p04>; 399 vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; 400 vdd_l9-supply = <&vreg_bob>; 401 vdd_l10_l23_l25-supply = <&vreg_bob>; 402 vdd_l13_l19_l21-supply = <&vreg_bob>; 403 vdd_l16_l28-supply = <&vreg_bob>; 404 vdd_l18_l22-supply = <&vreg_bob>; 405 vdd_l20_l24-supply = <&vreg_bob>; 406 vdd_l26-supply = <&vreg_s3a_1p35>; 407 vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; 408 409 vreg_s3a_1p35: s3 { 410 regulator-min-microvolt = <1352000>; 411 regulator-max-microvolt = <1352000>; 412 }; 413 vreg_s4a_1p8: s4 { 414 regulator-min-microvolt = <1800000>; 415 regulator-max-microvolt = <1800000>; 416 regulator-system-load = <100000>; 417 regulator-allow-set-load; 418 }; 419 vreg_s5a_2p04: s5 { 420 regulator-min-microvolt = <1904000>; 421 regulator-max-microvolt = <2032000>; 422 }; 423 vreg_s7a_1p025: s7 { 424 regulator-min-microvolt = <900000>; 425 regulator-max-microvolt = <1028000>; 426 }; 427 vreg_l1a_0p875: l1 { 428 regulator-min-microvolt = <880000>; 429 regulator-max-microvolt = <880000>; 430 regulator-system-load = <73400>; 431 regulator-allow-set-load; 432 }; 433 vreg_l2a_1p2: l2 { 434 regulator-min-microvolt = <1200000>; 435 regulator-max-microvolt = <1200000>; 436 regulator-system-load = <12560>; 437 regulator-allow-set-load; 438 }; 439 vreg_l3a_1p0: l3 { 440 regulator-min-microvolt = <1000000>; 441 regulator-max-microvolt = <1000000>; 442 }; 443 vreg_l5a_0p8: l5 { 444 regulator-min-microvolt = <800000>; 445 regulator-max-microvolt = <800000>; 446 }; 447 vreg_l6a_1p8: l6 { 448 regulator-min-microvolt = <1800000>; 449 regulator-max-microvolt = <1800000>; 450 }; 451 vreg_l7a_1p8: l7 { 452 regulator-min-microvolt = <1800000>; 453 regulator-max-microvolt = <1800000>; 454 }; 455 vreg_l8a_1p2: l8 { 456 regulator-min-microvolt = <1200000>; 457 regulator-max-microvolt = <1200000>; 458 }; 459 vreg_l9a_1p8: l9 { 460 regulator-min-microvolt = <1808000>; 461 regulator-max-microvolt = <2960000>; 462 }; 463 vreg_l10a_1p8: l10 { 464 regulator-min-microvolt = <1808000>; 465 regulator-max-microvolt = <2960000>; 466 }; 467 vreg_l11a_1p0: l11 { 468 regulator-min-microvolt = <1000000>; 469 regulator-max-microvolt = <1000000>; 470 }; 471 vreg_l12a_1p8: l12 { 472 regulator-min-microvolt = <1800000>; 473 regulator-max-microvolt = <1800000>; 474 }; 475 vreg_l13a_2p95: l13 { 476 regulator-min-microvolt = <1808000>; 477 regulator-max-microvolt = <2960000>; 478 regulator-allow-set-load; 479 }; 480 vreg_l14a_1p85: l14 { 481 regulator-min-microvolt = <1848000>; 482 regulator-max-microvolt = <1856000>; 483 regulator-system-load = <32000>; 484 regulator-allow-set-load; 485 }; 486 vreg_l15a_1p8: l15 { 487 regulator-min-microvolt = <1800000>; 488 regulator-max-microvolt = <1800000>; 489 }; 490 vreg_l16a_2p7: l16 { 491 regulator-min-microvolt = <2704000>; 492 regulator-max-microvolt = <2704000>; 493 }; 494 vreg_l17a_1p3: l17 { 495 regulator-min-microvolt = <1304000>; 496 regulator-max-microvolt = <1304000>; 497 }; 498 vreg_l18a_2p85: l18 {}; 499 vreg_l19a_2p7: l19 { 500 regulator-min-microvolt = <2696000>; 501 regulator-max-microvolt = <2704000>; 502 }; 503 vreg_l20a_2p95: l20 { 504 regulator-min-microvolt = <2960000>; 505 regulator-max-microvolt = <2960000>; 506 regulator-system-load = <10000>; 507 regulator-allow-set-load; 508 }; 509 vreg_l21a_2p95: l21 { 510 regulator-min-microvolt = <2960000>; 511 regulator-max-microvolt = <2960000>; 512 regulator-system-load = <800000>; 513 regulator-allow-set-load; 514 }; 515 vreg_l22a_2p85: l22 { }; 516 vreg_l23a_3p3: l23 { 517 regulator-min-microvolt = <3312000>; 518 regulator-max-microvolt = <3312000>; 519 }; 520 vreg_l24a_3p075: l24 { 521 regulator-min-microvolt = <3088000>; 522 regulator-max-microvolt = <3088000>; 523 }; 524 vreg_l25a_3p3: l25 { 525 regulator-min-microvolt = <3104000>; 526 regulator-max-microvolt = <3312000>; 527 }; 528 vreg_l26a_1p2: l26 { 529 regulator-min-microvolt = <1200000>; 530 regulator-max-microvolt = <1200000>; 531 regulator-allow-set-load; 532 }; 533 vreg_l28_3p0: l28 { 534 regulator-min-microvolt = <3000000>; 535 regulator-max-microvolt = <3000000>; 536 }; 537 vreg_lvs1a_1p8: lvs1 { }; 538 vreg_lvs2a_1p8: lvs2 { }; 539 }; 540 541 pmi8998-regulators { 542 compatible = "qcom,rpm-pmi8998-regulators"; 543 544 vdd_bob-supply = <&vph_pwr>; 545 546 vreg_bob: bob { 547 regulator-min-microvolt = <3312000>; 548 regulator-max-microvolt = <3600000>; 549 }; 550 }; 551 }; 552 553 &sdhc2 { 554 status = "okay"; 555 cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; 556 557 vmmc-supply = <&vreg_l21a_2p95>; 558 vqmmc-supply = <&vreg_l13a_2p95>; 559 560 pinctrl-names = "default", "sleep"; 561 pinctrl-0 = <&sdc2_on &sdc2_cd>; 562 pinctrl-1 = <&sdc2_off &sdc2_cd>; 563 }; 564 565 &tlmm { 566 gpio-reserved-ranges = <0 4>, <81 4>; 567 568 mdp_vsync_n: mdp-vsync-n { 569 pins = "gpio10"; 570 function = "mdp_vsync_a"; 571 drive-strength = <2>; 572 bias-pull-down; 573 }; 574 575 nfc_ven: nfc-ven { 576 pins = "gpio12"; 577 function = "gpio"; 578 bias-disable; 579 drive-strength = <2>; 580 output-low; 581 }; 582 583 msm_mclk0_default: msm-mclk0-active { 584 pins = "gpio13"; 585 function = "cam_mclk"; 586 drive-strength = <2>; 587 bias-disable; 588 }; 589 590 msm_mclk1_default: msm-mclk1-active { 591 pins = "gpio14"; 592 function = "cam_mclk"; 593 drive-strength = <2>; 594 bias-disable; 595 }; 596 597 cci0_default: cci0-default { 598 pins = "gpio18", "gpio19"; 599 function = "cci_i2c"; 600 bias-disable; 601 drive-strength = <2>; 602 }; 603 604 cci1_default: cci1-default { 605 pins = "gpio19", "gpio20"; 606 function = "cci_i2c"; 607 bias-disable; 608 drive-strength = <2>; 609 }; 610 611 cam0_vdig_default: cam0-vdig-default { 612 pins = "gpio21"; 613 function = "gpio"; 614 bias-disable; 615 drive-strength = <2>; 616 }; 617 618 tof_int: tof-int { 619 pins = "gpio22"; 620 function = "gpio"; 621 bias-pull-up; 622 drive-strength = <2>; 623 input-enable; 624 }; 625 626 cam1_vdig_default: cam1-vdig-default { 627 pins = "gpio25"; 628 function = "gpio"; 629 bias-disable; 630 drive-strength = <2>; 631 }; 632 633 usb_extcon_active: usb-extcon-active { 634 pins = "gpio38"; 635 function = "gpio"; 636 bias-disable; 637 drive-strength = <16>; 638 }; 639 640 tof_reset: tof-reset { 641 pins = "gpio27"; 642 function = "gpio"; 643 bias-disable; 644 drive-strength = <2>; 645 }; 646 647 hall_sensor0_default: acc-cover-open { 648 pins = "gpio124"; 649 function = "gpio"; 650 bias-disable; 651 drive-strength = <2>; 652 input-enable; 653 }; 654 655 ts_int_n: ts-int-n { 656 pins = "gpio125"; 657 function = "gpio"; 658 drive-strength = <8>; 659 bias-pull-up; 660 }; 661 662 usb_vbus_active: usb-vbus-active { 663 pins = "gpio128"; 664 function = "gpio"; 665 bias-disable; 666 drive-strength = <2>; 667 output-low; 668 }; 669 670 ts_vddio_en: ts-vddio-en-default { 671 pins = "gpio133"; 672 function = "gpio"; 673 bias-disable; 674 drive-strength = <2>; 675 output-low; 676 }; 677 }; 678 679 /* 680 * WARNING: 681 * Disable UFS until card quirks are in to avoid unrecoverable hard-brick 682 * that would happen as soon as the UFS card gets probed as, without the 683 * required quirks, the bootloader will be erased right after card probe. 684 */ 685 &ufshc { 686 status = "disabled"; 687 }; 688 689 &ufsphy { 690 status = "disabled"; 691 }; 692 693 &usb3 { 694 status = "okay"; 695 }; 696 697 &usb3_dwc3 { 698 /* Force to peripheral until we have Type-C hooked up */ 699 dr_mode = "peripheral"; 700 extcon = <&extcon_usb>; 701 }; 702 703 &usb3phy { 704 status = "okay"; 705 706 vdda-phy-supply = <&vreg_l1a_0p875>; 707 vdda-pll-supply = <&vreg_l2a_1p2>; 708 };
Cache object: 2fa2603c445f10b738612fec4d103cbb
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]