pm6150.dtsi

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: BSD-3-Clause
    2 // Copyright (c) 2019, The Linux Foundation. All rights reserved.
    3 
    4 #include <dt-bindings/iio/qcom,spmi-vadc.h>
    5 #include <dt-bindings/input/linux-event-codes.h>
    6 #include <dt-bindings/interrupt-controller/irq.h>
    7 #include <dt-bindings/spmi/spmi.h>
    8 #include <dt-bindings/thermal/thermal.h>
    9 
   10 / {
   11         thermal-zones {
   12                 pm6150_thermal: pm6150-thermal {
   13                         polling-delay-passive = <100>;
   14                         polling-delay = <0>;
   15                         thermal-sensors = <&pm6150_temp>;
   16 
   17                         trips {
   18                                 pm6150_trip0: trip0 {
   19                                         temperature = <95000>;
   20                                         hysteresis = <0>;
   21                                         type = "passive";
   22                                 };
   23 
   24                                 pm6150_crit: crit {
   25                                         temperature = <115000>;
   26                                         hysteresis = <0>;
   27                                         type = "critical";
   28                                 };
   29                         };
   30                 };
   31         };
   32 };
   33 
   34 &spmi_bus {
   35         pm6150_lsid0: pmic@0 {
   36                 compatible = "qcom,pm6150", "qcom,spmi-pmic";
   37                 reg = <0x0 SPMI_USID>;
   38                 #address-cells = <1>;
   39                 #size-cells = <0>;
   40 
   41                 pm6150_pon: pon@800 {
   42                         compatible = "qcom,pm8998-pon";
   43                         reg = <0x800>;
   44                         mode-bootloader = <0x2>;
   45                         mode-recovery = <0x1>;
   46 
   47                         pm6150_pwrkey: pwrkey {
   48                                 compatible = "qcom,pm8941-pwrkey";
   49                                 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
   50                                 debounce = <15625>;
   51                                 bias-pull-up;
   52                                 linux,code = <KEY_POWER>;
   53                         };
   54                 };
   55 
   56                 pm6150_temp: temp-alarm@2400 {
   57                         compatible = "qcom,spmi-temp-alarm";
   58                         reg = <0x2400>;
   59                         interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
   60                         io-channels = <&pm6150_adc ADC5_DIE_TEMP>;
   61                         io-channel-names = "thermal";
   62                         #thermal-sensor-cells = <0>;
   63                 };
   64 
   65                 pm6150_adc: adc@3100 {
   66                         compatible = "qcom,spmi-adc5";
   67                         reg = <0x3100>;
   68                         interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
   69                         #address-cells = <1>;
   70                         #size-cells = <0>;
   71                         #io-channel-cells = <1>;
   72 
   73                         adc-chan@6 {
   74                                 reg = <ADC5_DIE_TEMP>;
   75                                 label = "die_temp";
   76                         };
   77                 };
   78 
   79                 pm6150_adc_tm: adc-tm@3500 {
   80                         compatible = "qcom,spmi-adc-tm5";
   81                         reg = <0x3500>;
   82                         interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
   83                         #thermal-sensor-cells = <1>;
   84                         #address-cells = <1>;
   85                         #size-cells = <0>;
   86                         status = "disabled";
   87                 };
   88 
   89                 pm6150_gpio: gpios@c000 {
   90                         compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
   91                         reg = <0xc000>;
   92                         gpio-controller;
   93                         gpio-ranges = <&pm6150_gpio 0 0 10>;
   94                         #gpio-cells = <2>;
   95                         interrupt-controller;
   96                         #interrupt-cells = <2>;
   97                 };
   98         };
   99 
  100         pm6150_lsid1: pmic@1 {
  101                 compatible = "qcom,pm6150", "qcom,spmi-pmic";
  102                 reg = <0x1 SPMI_USID>;
  103                 #address-cells = <1>;
  104                 #size-cells = <0>;
  105         };
  106 };

Cache object: 46cef8c3abe62c7287839261201ceaef

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm64/qcom/pm6150.dtsi

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/qcom/pm6150.dtsi