The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/qcom/pm8150.dtsi

Version: -  FREEBSD  -  FREEBSD-13-STABLE  -  FREEBSD-13-0  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  l41  -  OPENBSD  -  linux-2.6  -  MK84  -  PLAN9  -  xnu-8792 
SearchContext: -  none  -  3  -  10  
    1 // SPDX-License-Identifier: BSD-3-Clause
    2 /*
    3  * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
    4  * Copyright (c) 2019, Linaro Limited
    5  */
    6 
    7 #include <dt-bindings/input/input.h>
    8 #include <dt-bindings/interrupt-controller/irq.h>
    9 #include <dt-bindings/spmi/spmi.h>
   10 #include <dt-bindings/iio/qcom,spmi-vadc.h>
   11 
   12 / {
   13         thermal-zones {
   14                 pm8150-thermal {
   15                         polling-delay-passive = <100>;
   16                         polling-delay = <0>;
   17 
   18                         thermal-sensors = <&pm8150_temp>;
   19 
   20                         trips {
   21                                 trip0 {
   22                                         temperature = <95000>;
   23                                         hysteresis = <0>;
   24                                         type = "passive";
   25                                 };
   26 
   27                                 trip1 {
   28                                         temperature = <115000>;
   29                                         hysteresis = <0>;
   30                                         type = "hot";
   31                                 };
   32 
   33                                 trip2 {
   34                                         temperature = <145000>;
   35                                         hysteresis = <0>;
   36                                         type = "critical";
   37                                 };
   38                         };
   39                 };
   40         };
   41 };
   42 
   43 &spmi_bus {
   44         pm8150_0: pmic@0 {
   45                 compatible = "qcom,pm8150", "qcom,spmi-pmic";
   46                 reg = <0x0 SPMI_USID>;
   47                 #address-cells = <1>;
   48                 #size-cells = <0>;
   49 
   50                 pon: power-on@800 {
   51                         compatible = "qcom,pm8998-pon";
   52                         reg = <0x0800>;
   53                         mode-bootloader = <0x2>;
   54                         mode-recovery = <0x1>;
   55 
   56                         pon_pwrkey: pwrkey {
   57                                 compatible = "qcom,pm8941-pwrkey";
   58                                 interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
   59                                 debounce = <15625>;
   60                                 bias-pull-up;
   61                                 linux,code = <KEY_POWER>;
   62 
   63                                 status = "disabled";
   64                         };
   65 
   66                         pon_resin: resin {
   67                                 compatible = "qcom,pm8941-resin";
   68                                 interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
   69                                 debounce = <15625>;
   70                                 bias-pull-up;
   71 
   72                                 status = "disabled";
   73                         };
   74                 };
   75 
   76                 pm8150_temp: temp-alarm@2400 {
   77                         compatible = "qcom,spmi-temp-alarm";
   78                         reg = <0x2400>;
   79                         interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
   80                         io-channels = <&pm8150_adc ADC5_DIE_TEMP>;
   81                         io-channel-names = "thermal";
   82                         #thermal-sensor-cells = <0>;
   83                 };
   84 
   85                 pm8150_adc: adc@3100 {
   86                         compatible = "qcom,spmi-adc5";
   87                         reg = <0x3100>;
   88                         #address-cells = <1>;
   89                         #size-cells = <0>;
   90                         #io-channel-cells = <1>;
   91                         interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
   92 
   93                         ref-gnd@0 {
   94                                 reg = <ADC5_REF_GND>;
   95                                 qcom,pre-scaling = <1 1>;
   96                                 label = "ref_gnd";
   97                         };
   98 
   99                         vref-1p25@1 {
  100                                 reg = <ADC5_1P25VREF>;
  101                                 qcom,pre-scaling = <1 1>;
  102                                 label = "vref_1p25";
  103                         };
  104 
  105                         die-temp@6 {
  106                                 reg = <ADC5_DIE_TEMP>;
  107                                 qcom,pre-scaling = <1 1>;
  108                                 label = "die_temp";
  109                         };
  110                 };
  111 
  112                 pm8150_adc_tm: adc-tm@3500 {
  113                         compatible = "qcom,spmi-adc-tm5";
  114                         reg = <0x3500>;
  115                         interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
  116                         #thermal-sensor-cells = <1>;
  117                         #address-cells = <1>;
  118                         #size-cells = <0>;
  119                         status = "disabled";
  120                 };
  121 
  122                 rtc@6000 {
  123                         compatible = "qcom,pm8941-rtc";
  124                         reg = <0x6000>;
  125                         reg-names = "rtc", "alarm";
  126                         interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
  127                 };
  128 
  129                 pm8150_gpios: gpio@c000 {
  130                         compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
  131                         reg = <0xc000>;
  132                         gpio-controller;
  133                         gpio-ranges = <&pm8150_gpios 0 0 10>;
  134                         #gpio-cells = <2>;
  135                         interrupt-controller;
  136                         #interrupt-cells = <2>;
  137                 };
  138         };
  139 
  140         pmic@1 {
  141                 compatible = "qcom,pm8150", "qcom,spmi-pmic";
  142                 reg = <0x1 SPMI_USID>;
  143                 #address-cells = <1>;
  144                 #size-cells = <0>;
  145         };
  146 };

Cache object: 88666bfe2e1216d1866f4dd24410fbb7

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.