The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/qcom/pm8150b.dtsi

Version: -  FREEBSD  -  FREEBSD-13-STABLE  -  FREEBSD-13-0  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  l41  -  OPENBSD  -  linux-2.6  -  MK84  -  PLAN9  -  xnu-8792 
SearchContext: -  none  -  3  -  10  
    1 // SPDX-License-Identifier: BSD-3-Clause
    2 /*
    3  * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
    4  * Copyright (c) 2019, Linaro Limited
    5  */
    6 
    7 #include <dt-bindings/iio/qcom,spmi-vadc.h>
    8 #include <dt-bindings/interrupt-controller/irq.h>
    9 #include <dt-bindings/spmi/spmi.h>
   10 
   11 / {
   12         thermal-zones {
   13                 pm8150b-thermal {
   14                         polling-delay-passive = <100>;
   15                         polling-delay = <0>;
   16 
   17                         thermal-sensors = <&pm8150b_temp>;
   18 
   19                         trips {
   20                                 trip0 {
   21                                         temperature = <95000>;
   22                                         hysteresis = <0>;
   23                                         type = "passive";
   24                                 };
   25 
   26                                 trip1 {
   27                                         temperature = <115000>;
   28                                         hysteresis = <0>;
   29                                         type = "hot";
   30                                 };
   31 
   32                                 trip2 {
   33                                         temperature = <145000>;
   34                                         hysteresis = <0>;
   35                                         type = "critical";
   36                                 };
   37                         };
   38                 };
   39         };
   40 };
   41 
   42 &spmi_bus {
   43         pmic@2 {
   44                 compatible = "qcom,pm8150b", "qcom,spmi-pmic";
   45                 reg = <0x2 SPMI_USID>;
   46                 #address-cells = <1>;
   47                 #size-cells = <0>;
   48 
   49                 power-on@800 {
   50                         compatible = "qcom,pm8916-pon";
   51                         reg = <0x0800>;
   52 
   53                         status = "disabled";
   54                 };
   55 
   56                 pm8150b_vbus: dcdc@1100 {
   57                         compatible = "qcom,pm8150b-vbus-reg";
   58                         status = "disabled";
   59                         reg = <0x1100>;
   60                 };
   61 
   62                 pm8150b_temp: temp-alarm@2400 {
   63                         compatible = "qcom,spmi-temp-alarm";
   64                         reg = <0x2400>;
   65                         interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
   66                         io-channels = <&pm8150b_adc ADC5_DIE_TEMP>;
   67                         io-channel-names = "thermal";
   68                         #thermal-sensor-cells = <0>;
   69                 };
   70 
   71                 pm8150b_adc: adc@3100 {
   72                         compatible = "qcom,spmi-adc5";
   73                         reg = <0x3100>;
   74                         #address-cells = <1>;
   75                         #size-cells = <0>;
   76                         #io-channel-cells = <1>;
   77                         interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
   78 
   79                         ref-gnd@0 {
   80                                 reg = <ADC5_REF_GND>;
   81                                 qcom,pre-scaling = <1 1>;
   82                                 label = "ref_gnd";
   83                         };
   84 
   85                         vref-1p25@1 {
   86                                 reg = <ADC5_1P25VREF>;
   87                                 qcom,pre-scaling = <1 1>;
   88                                 label = "vref_1p25";
   89                         };
   90 
   91                         die-temp@6 {
   92                                 reg = <ADC5_DIE_TEMP>;
   93                                 qcom,pre-scaling = <1 1>;
   94                                 label = "die_temp";
   95                         };
   96 
   97                         chg-temp@9 {
   98                                 reg = <ADC5_CHG_TEMP>;
   99                                 qcom,pre-scaling = <1 1>;
  100                                 label = "chg_temp";
  101                         };
  102                 };
  103 
  104                 pm8150b_adc_tm: adc-tm@3500 {
  105                         compatible = "qcom,spmi-adc-tm5";
  106                         reg = <0x3500>;
  107                         interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
  108                         #thermal-sensor-cells = <1>;
  109                         #address-cells = <1>;
  110                         #size-cells = <0>;
  111                         status = "disabled";
  112                 };
  113 
  114                 pm8150b_gpios: gpio@c000 {
  115                         compatible = "qcom,pm8150b-gpio", "qcom,spmi-gpio";
  116                         reg = <0xc000>;
  117                         gpio-controller;
  118                         gpio-ranges = <&pm8150b_gpios 0 0 12>;
  119                         #gpio-cells = <2>;
  120                         interrupt-controller;
  121                         #interrupt-cells = <2>;
  122                 };
  123         };
  124 
  125         pmic@3 {
  126                 compatible = "qcom,pm8150b", "qcom,spmi-pmic";
  127                 reg = <0x3 SPMI_USID>;
  128                 #address-cells = <1>;
  129                 #size-cells = <0>;
  130 
  131                 pm8150b_lpg: lpg {
  132                         compatible = "qcom,pm8150b-lpg";
  133 
  134                         #address-cells = <1>;
  135                         #size-cells = <0>;
  136                         #pwm-cells = <2>;
  137 
  138                         status = "disabled";
  139                 };
  140         };
  141 };

Cache object: 9a2a6fe5f5ce3df5aad14e08e8b7b01d

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.