pm8150l.dtsi

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: BSD-3-Clause
    2 /*
    3  * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
    4  * Copyright (c) 2019, Linaro Limited
    5  */
    6 
    7 #include <dt-bindings/iio/qcom,spmi-vadc.h>
    8 #include <dt-bindings/interrupt-controller/irq.h>
    9 #include <dt-bindings/spmi/spmi.h>
   10 
   11 / {
   12         thermal-zones {
   13                 pm8150l-thermal {
   14                         polling-delay-passive = <100>;
   15                         polling-delay = <0>;
   16 
   17                         thermal-sensors = <&pm8150l_temp>;
   18 
   19                         trips {
   20                                 trip0 {
   21                                         temperature = <95000>;
   22                                         hysteresis = <0>;
   23                                         type = "passive";
   24                                 };
   25 
   26                                 trip1 {
   27                                         temperature = <115000>;
   28                                         hysteresis = <0>;
   29                                         type = "hot";
   30                                 };
   31 
   32                                 trip2 {
   33                                         temperature = <145000>;
   34                                         hysteresis = <0>;
   35                                         type = "critical";
   36                                 };
   37                         };
   38                 };
   39         };
   40 };
   41 
   42 &spmi_bus {
   43         pmic@4 {
   44                 compatible = "qcom,pm8150l", "qcom,spmi-pmic";
   45                 reg = <0x4 SPMI_USID>;
   46                 #address-cells = <1>;
   47                 #size-cells = <0>;
   48 
   49                 power-on@800 {
   50                         compatible = "qcom,pm8916-pon";
   51                         reg = <0x0800>;
   52 
   53                         status = "disabled";
   54                 };
   55 
   56                 pm8150l_temp: temp-alarm@2400 {
   57                         compatible = "qcom,spmi-temp-alarm";
   58                         reg = <0x2400>;
   59                         interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
   60                         io-channels = <&pm8150l_adc ADC5_DIE_TEMP>;
   61                         io-channel-names = "thermal";
   62                         #thermal-sensor-cells = <0>;
   63                 };
   64 
   65                 pm8150l_adc: adc@3100 {
   66                         compatible = "qcom,spmi-adc5";
   67                         reg = <0x3100>;
   68                         #address-cells = <1>;
   69                         #size-cells = <0>;
   70                         #io-channel-cells = <1>;
   71                         interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
   72 
   73                         ref-gnd@0 {
   74                                 reg = <ADC5_REF_GND>;
   75                                 qcom,pre-scaling = <1 1>;
   76                                 label = "ref_gnd";
   77                         };
   78 
   79                         vref-1p25@1 {
   80                                 reg = <ADC5_1P25VREF>;
   81                                 qcom,pre-scaling = <1 1>;
   82                                 label = "vref_1p25";
   83                         };
   84 
   85                         die-temp@6 {
   86                                 reg = <ADC5_DIE_TEMP>;
   87                                 qcom,pre-scaling = <1 1>;
   88                                 label = "die_temp";
   89                         };
   90                 };
   91 
   92                 pm8150l_adc_tm: adc-tm@3500 {
   93                         compatible = "qcom,spmi-adc-tm5";
   94                         reg = <0x3500>;
   95                         interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
   96                         #thermal-sensor-cells = <1>;
   97                         #address-cells = <1>;
   98                         #size-cells = <0>;
   99                         status = "disabled";
  100                 };
  101 
  102                 pm8150l_gpios: gpio@c000 {
  103                         compatible = "qcom,pm8150l-gpio", "qcom,spmi-gpio";
  104                         reg = <0xc000>;
  105                         gpio-controller;
  106                         gpio-ranges = <&pm8150l_gpios 0 0 12>;
  107                         #gpio-cells = <2>;
  108                         interrupt-controller;
  109                         #interrupt-cells = <2>;
  110                 };
  111         };
  112 
  113         pmic@5 {
  114                 compatible = "qcom,pm8150l", "qcom,spmi-pmic";
  115                 reg = <0x5 SPMI_USID>;
  116                 #address-cells = <1>;
  117                 #size-cells = <0>;
  118 
  119                 pm8150l_lpg: lpg {
  120                         compatible = "qcom,pm8150l-lpg";
  121 
  122                         #address-cells = <1>;
  123                         #size-cells = <0>;
  124                         #pwm-cells = <2>;
  125 
  126                         status = "disabled";
  127                 };
  128 
  129         };
  130 };

Cache object: 204d3711f9e1a14f8b1899309b4565e3

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm64/qcom/pm8150l.dtsi

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/qcom/pm8150l.dtsi