Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/qcom/pms405.dtsi
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 // SPDX-License-Identifier: GPL-2.0 2 // Copyright (c) 2018, Linaro Limited 3 4 #include <dt-bindings/spmi/spmi.h> 5 #include <dt-bindings/input/linux-event-codes.h> 6 #include <dt-bindings/iio/qcom,spmi-vadc.h> 7 #include <dt-bindings/thermal/thermal.h> 8 9 / { 10 thermal-zones { 11 pms405-thermal { 12 polling-delay-passive = <250>; 13 polling-delay = <1000>; 14 15 thermal-sensors = <&pms405_temp>; 16 17 trips { 18 pms405_alert0: pms405-alert0 { 19 temperature = <105000>; 20 hysteresis = <2000>; 21 type = "passive"; 22 }; 23 pms405_crit: pms405-crit { 24 temperature = <125000>; 25 hysteresis = <2000>; 26 type = "critical"; 27 }; 28 }; 29 }; 30 }; 31 }; 32 33 &spmi_bus { 34 pms405_0: pms405@0 { 35 compatible = "qcom,pms405", "qcom,spmi-pmic"; 36 reg = <0x0 SPMI_USID>; 37 #address-cells = <1>; 38 #size-cells = <0>; 39 40 pms405_gpios: gpio@c000 { 41 compatible = "qcom,pms405-gpio", "qcom,spmi-gpio"; 42 reg = <0xc000>; 43 gpio-controller; 44 gpio-ranges = <&pms405_gpios 0 0 12>; 45 #gpio-cells = <2>; 46 interrupt-controller; 47 #interrupt-cells = <2>; 48 }; 49 50 pon@800 { 51 compatible = "qcom,pms405-pon"; 52 reg = <0x0800>; 53 mode-bootloader = <0x2>; 54 mode-recovery = <0x1>; 55 56 pwrkey { 57 compatible = "qcom,pm8941-pwrkey"; 58 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; 59 debounce = <15625>; 60 bias-pull-up; 61 linux,code = <KEY_POWER>; 62 }; 63 }; 64 65 pms405_temp: temp-alarm@2400 { 66 compatible = "qcom,spmi-temp-alarm"; 67 reg = <0x2400>; 68 interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; 69 io-channels = <&pms405_adc ADC5_DIE_TEMP>; 70 io-channel-names = "thermal"; 71 #thermal-sensor-cells = <0>; 72 }; 73 74 pms405_adc: adc@3100 { 75 compatible = "qcom,pms405-adc", "qcom,spmi-adc-rev2"; 76 reg = <0x3100>; 77 interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; 78 #address-cells = <1>; 79 #size-cells = <0>; 80 #io-channel-cells = <1>; 81 82 ref_gnd@0 { 83 reg = <ADC5_REF_GND>; 84 qcom,pre-scaling = <1 1>; 85 }; 86 87 vref_1p25@1 { 88 reg = <ADC5_1P25VREF>; 89 qcom,pre-scaling = <1 1>; 90 }; 91 92 pon_1: vph_pwr@131 { 93 reg = <ADC5_VPH_PWR>; 94 qcom,pre-scaling = <1 3>; 95 }; 96 97 die_temp@6 { 98 reg = <ADC5_DIE_TEMP>; 99 qcom,pre-scaling = <1 1>; 100 }; 101 102 pa_therm1: thermistor1@77 { 103 reg = <ADC5_AMUX_THM1_100K_PU>; 104 qcom,ratiometric; 105 qcom,hw-settle-time = <200>; 106 qcom,pre-scaling = <1 1>; 107 }; 108 109 pa_therm3: thermistor3@79 { 110 reg = <ADC5_AMUX_THM3_100K_PU>; 111 qcom,ratiometric; 112 qcom,hw-settle-time = <200>; 113 qcom,pre-scaling = <1 1>; 114 }; 115 116 xo_therm: xo_temp@76 { 117 reg = <ADC5_XO_THERM_100K_PU>; 118 qcom,ratiometric; 119 qcom,hw-settle-time = <200>; 120 qcom,pre-scaling = <1 1>; 121 }; 122 }; 123 124 rtc@6000 { 125 compatible = "qcom,pm8941-rtc"; 126 reg = <0x6000>; 127 reg-names = "rtc", "alarm"; 128 interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; 129 }; 130 }; 131 132 pms405_1: pms405@1 { 133 compatible = "qcom,pms405", "qcom,spmi-pmic"; 134 reg = <0x1 SPMI_USID>; 135 136 pms405_spmi_regulators: regulators { 137 compatible = "qcom,pms405-regulators"; 138 }; 139 }; 140 };
Cache object: 422c4947ac8ed80d342fbb4933805ac1
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]