qrb5165-rb5.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
    1 // SPDX-License-Identifier: BSD-3-Clause
    2 /*
    3  * Copyright (c) 2020, Linaro Ltd.
    4  */
    5 
    6 /dts-v1/;
    7 
    8 #include <dt-bindings/leds/common.h>
    9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
   10 #include <dt-bindings/sound/qcom,q6afe.h>
   11 #include <dt-bindings/sound/qcom,q6asm.h>
   12 #include "sm8250.dtsi"
   13 #include "pm8150.dtsi"
   14 #include "pm8150b.dtsi"
   15 #include "pm8150l.dtsi"
   16 
   17 / {
   18         model = "Qualcomm Technologies, Inc. Robotics RB5";
   19         compatible = "qcom,qrb5165-rb5", "qcom,sm8250";
   20         qcom,msm-id = <455 0x20001>;
   21         qcom,board-id = <11 3>;
   22 
   23         aliases {
   24                 serial0 = &uart12;
   25                 sdhc2 = &sdhc_2;
   26         };
   27 
   28         chosen {
   29                 stdout-path = "serial0:115200n8";
   30         };
   31 
   32         /* Fixed crystal oscillator dedicated to MCP2518FD */
   33         clk40M: can-clock {
   34                 compatible = "fixed-clock";
   35                 #clock-cells = <0>;
   36                 clock-frequency = <40000000>;
   37         };
   38 
   39         dc12v: dc12v-regulator {
   40                 compatible = "regulator-fixed";
   41                 regulator-name = "DC12V";
   42                 regulator-min-microvolt = <12000000>;
   43                 regulator-max-microvolt = <12000000>;
   44                 regulator-always-on;
   45         };
   46 
   47         hdmi-out {
   48                 compatible = "hdmi-connector";
   49                 type = "a";
   50 
   51                 port {
   52                         hdmi_con: endpoint {
   53                                 remote-endpoint = <&lt9611_out>;
   54                         };
   55                 };
   56         };
   57 
   58         leds {
   59                 compatible = "gpio-leds";
   60 
   61                 led-user4 {
   62                         label = "green:user4";
   63                         function = LED_FUNCTION_INDICATOR;
   64                         color = <LED_COLOR_ID_GREEN>;
   65                         gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
   66                         linux,default-trigger = "panic-indicator";
   67                         default-state = "off";
   68                 };
   69 
   70                 led-wlan {
   71                         label = "yellow:wlan";
   72                         function = LED_FUNCTION_WLAN;
   73                         color = <LED_COLOR_ID_YELLOW>;
   74                         gpios = <&pm8150_gpios 9 GPIO_ACTIVE_HIGH>;
   75                         linux,default-trigger = "phy0tx";
   76                         default-state = "off";
   77                 };
   78 
   79                 led-bt {
   80                         label = "blue:bt";
   81                         function = LED_FUNCTION_BLUETOOTH;
   82                         color = <LED_COLOR_ID_BLUE>;
   83                         gpios = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>;
   84                         linux,default-trigger = "bluetooth-power";
   85                         default-state = "off";
   86                 };
   87         };
   88 
   89         lt9611_1v2: lt9611-vdd12-regulator {
   90                 compatible = "regulator-fixed";
   91                 regulator-name = "LT9611_1V2";
   92 
   93                 vin-supply = <&vdc_3v3>;
   94                 regulator-min-microvolt = <1200000>;
   95                 regulator-max-microvolt = <1200000>;
   96         };
   97 
   98         lt9611_3v3: lt9611-3v3 {
   99                 compatible = "regulator-fixed";
  100                 regulator-name = "LT9611_3V3";
  101 
  102                 vin-supply = <&vdc_3v3>;
  103                 regulator-min-microvolt = <3300000>;
  104                 regulator-max-microvolt = <3300000>;
  105                 regulator-boot-on;
  106                 regulator-always-on;
  107         };
  108 
  109         thermal-zones {
  110                 conn-thermal {
  111                         polling-delay-passive = <0>;
  112                         polling-delay = <0>;
  113                         thermal-sensors = <&pm8150b_adc_tm 0>;
  114 
  115                         trips {
  116                                 active-config0 {
  117                                         temperature = <125000>;
  118                                         hysteresis = <1000>;
  119                                         type = "critical";
  120                                 };
  121                         };
  122                 };
  123 
  124                 pm8150l-thermal {
  125                         polling-delay-passive = <0>;
  126                         polling-delay = <0>;
  127                         thermal-sensors = <&pm8150l_adc_tm 1>;
  128 
  129                         trips {
  130                                 active-config0 {
  131                                         temperature = <50000>;
  132                                         hysteresis = <4000>;
  133                                         type = "passive";
  134                                 };
  135                         };
  136                 };
  137 
  138                 skin-msm-thermal {
  139                         polling-delay-passive = <0>;
  140                         polling-delay = <0>;
  141                         thermal-sensors = <&pm8150l_adc_tm 0>;
  142 
  143                         trips {
  144                                 active-config0 {
  145                                         temperature = <50000>;
  146                                         hysteresis = <4000>;
  147                                         type = "passive";
  148                                 };
  149                         };
  150                 };
  151 
  152                 wifi-thermal {
  153                         polling-delay-passive = <0>;
  154                         polling-delay = <0>;
  155                         thermal-sensors = <&pm8150_adc_tm 1>;
  156 
  157                         trips {
  158                                 active-config0 {
  159                                         temperature = <52000>;
  160                                         hysteresis = <4000>;
  161                                         type = "passive";
  162                                 };
  163                         };
  164                 };
  165 
  166                 xo-thermal {
  167                         polling-delay-passive = <0>;
  168                         polling-delay = <0>;
  169                         thermal-sensors = <&pm8150_adc_tm 0>;
  170 
  171                         trips {
  172                                 active-config0 {
  173                                         temperature = <50000>;
  174                                         hysteresis = <4000>;
  175                                         type = "passive";
  176                                 };
  177                         };
  178                 };
  179         };
  180 
  181         vbat: vbat-regulator {
  182                 compatible = "regulator-fixed";
  183                 regulator-name = "VBAT";
  184                 vin-supply = <&vreg_l11c_3p3>;
  185                 regulator-min-microvolt = <4200000>;
  186                 regulator-max-microvolt = <4200000>;
  187                 regulator-always-on;
  188         };
  189 
  190         vbat_som: vbat-som-regulator {
  191                 compatible = "regulator-fixed";
  192                 regulator-name = "VBAT_SOM";
  193                 vin-supply = <&dc12v>;
  194                 regulator-min-microvolt = <4200000>;
  195                 regulator-max-microvolt = <4200000>;
  196                 regulator-always-on;
  197         };
  198 
  199         vdc_3v3: vdc-3v3-regulator {
  200                 compatible = "regulator-fixed";
  201                 regulator-name = "VDC_3V3";
  202                 vin-supply = <&vreg_l11c_3p3>;
  203                 regulator-min-microvolt = <3300000>;
  204                 regulator-max-microvolt = <3300000>;
  205                 regulator-always-on;
  206         };
  207 
  208         vdc_5v: vdc-5v-regulator {
  209                 compatible = "regulator-fixed";
  210                 regulator-name = "VDC_5V";
  211 
  212                 regulator-min-microvolt = <5000000>;
  213                 regulator-max-microvolt = <5000000>;
  214                 regulator-always-on;
  215                 vin-supply = <&vreg_l11c_3p3>;
  216         };
  217 
  218         vph_pwr: vph-pwr-regulator {
  219                 compatible = "regulator-fixed";
  220                 regulator-name = "vph_pwr";
  221                 regulator-min-microvolt = <3700000>;
  222                 regulator-max-microvolt = <3700000>;
  223                 regulator-always-on;
  224         };
  225 
  226         vreg_s4a_1p8: vreg-s4a-1p8 {
  227                 compatible = "regulator-fixed";
  228                 regulator-name = "vreg_s4a_1p8";
  229                 regulator-min-microvolt = <1800000>;
  230                 regulator-max-microvolt = <1800000>;
  231                 regulator-always-on;
  232         };
  233 };
  234 
  235 &adsp {
  236         status = "okay";
  237         firmware-name = "qcom/sm8250/adsp.mbn";
  238 };
  239 
  240 &apps_rsc {
  241         pm8009-rpmh-regulators {
  242                 compatible = "qcom,pm8009-1-rpmh-regulators";
  243                 qcom,pmic-id = "f";
  244 
  245                 vdd-s1-supply = <&vph_pwr>;
  246                 vdd-s2-supply = <&vph_pwr>;
  247                 vdd-l2-supply = <&vreg_s8c_1p3>;
  248                 vdd-l5-l6-supply = <&vreg_bob>;
  249                 vdd-l7-supply = <&vreg_s4a_1p8>;
  250 
  251                 vreg_s2f_0p95: smps2 {
  252                         regulator-name = "vreg_s2f_0p95";
  253                         regulator-min-microvolt = <900000>;
  254                         regulator-max-microvolt = <952000>;
  255                         regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
  256                 };
  257 
  258                 vreg_l1f_1p1: ldo1 {
  259                         regulator-name = "vreg_l1f_1p1";
  260                         regulator-min-microvolt = <1104000>;
  261                         regulator-max-microvolt = <1104000>;
  262                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  263                 };
  264 
  265                 vreg_l2f_1p2: ldo2 {
  266                         regulator-name = "vreg_l2f_1p2";
  267                         regulator-min-microvolt = <1200000>;
  268                         regulator-max-microvolt = <1200000>;
  269                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  270                 };
  271 
  272                 vreg_l6f_2p8: ldo6 {
  273                         regulator-name = "vreg_l6f_2p8";
  274                         regulator-min-microvolt = <2800000>;
  275                         regulator-max-microvolt = <2800000>;
  276                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  277                 };
  278 
  279                 vreg_l7f_1p8: ldo7 {
  280                         regulator-name = "vreg_l7f_1p8";
  281                         regulator-min-microvolt = <1800000>;
  282                         regulator-max-microvolt = <1800000>;
  283                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  284                 };
  285         };
  286 
  287         pm8150-rpmh-regulators {
  288                 compatible = "qcom,pm8150-rpmh-regulators";
  289                 qcom,pmic-id = "a";
  290 
  291                 vdd-s1-supply = <&vph_pwr>;
  292                 vdd-s2-supply = <&vph_pwr>;
  293                 vdd-s3-supply = <&vph_pwr>;
  294                 vdd-s4-supply = <&vph_pwr>;
  295                 vdd-s5-supply = <&vph_pwr>;
  296                 vdd-s6-supply = <&vph_pwr>;
  297                 vdd-s7-supply = <&vph_pwr>;
  298                 vdd-s8-supply = <&vph_pwr>;
  299                 vdd-s9-supply = <&vph_pwr>;
  300                 vdd-s10-supply = <&vph_pwr>;
  301                 vdd-l2-l10-supply = <&vreg_bob>;
  302                 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
  303                 vdd-l6-l9-supply = <&vreg_s8c_1p3>;
  304                 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
  305                 vdd-l13-l16-l17-supply = <&vreg_bob>;
  306 
  307                 vreg_l2a_3p1: ldo2 {
  308                         regulator-name = "vreg_l2a_3p1";
  309                         regulator-min-microvolt = <3072000>;
  310                         regulator-max-microvolt = <3072000>;
  311                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  312                 };
  313 
  314                 vreg_l3a_0p9: ldo3 {
  315                         regulator-name = "vreg_l3a_0p9";
  316                         regulator-min-microvolt = <928000>;
  317                         regulator-max-microvolt = <932000>;
  318                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  319                 };
  320 
  321                 vreg_l5a_0p88: ldo5 {
  322                         regulator-name = "vreg_l5a_0p88";
  323                         regulator-min-microvolt = <880000>;
  324                         regulator-max-microvolt = <880000>;
  325                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  326                 };
  327 
  328                 vreg_l6a_1p2: ldo6 {
  329                         regulator-name = "vreg_l6a_1p2";
  330                         regulator-min-microvolt = <1200000>;
  331                         regulator-max-microvolt = <1200000>;
  332                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  333                 };
  334 
  335                 vreg_l7a_1p7: ldo7 {
  336                         regulator-name = "vreg_l7a_1p7";
  337                         regulator-min-microvolt = <1704000>;
  338                         regulator-max-microvolt = <1800000>;
  339                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  340                 };
  341 
  342                 vreg_l9a_1p2: ldo9 {
  343                         regulator-name = "vreg_l9a_1p2";
  344                         regulator-min-microvolt = <1200000>;
  345                         regulator-max-microvolt = <1200000>;
  346                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  347                 };
  348 
  349                 vreg_l10a_1p8: ldo10 {
  350                         regulator-name = "vreg_l10a_1p8";
  351                         regulator-min-microvolt = <1800000>;
  352                         regulator-max-microvolt = <1800000>;
  353                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  354                 };
  355 
  356                 vreg_l12a_1p8: ldo12 {
  357                         regulator-name = "vreg_l12a_1p8";
  358                         regulator-min-microvolt = <1800000>;
  359                         regulator-max-microvolt = <1800000>;
  360                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  361                 };
  362 
  363                 vreg_l13a_ts_3p0: ldo13 {
  364                         regulator-name = "vreg_l13a_ts_3p0";
  365                         regulator-min-microvolt = <3008000>;
  366                         regulator-max-microvolt = <3008000>;
  367                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  368                 };
  369 
  370                 vreg_l14a_1p8: ldo14 {
  371                         regulator-name = "vreg_l14a_1p8";
  372                         regulator-min-microvolt = <1800000>;
  373                         regulator-max-microvolt = <1880000>;
  374                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  375                 };
  376 
  377                 vreg_l15a_1p8: ldo15 {
  378                         regulator-name = "vreg_l15a_1p8";
  379                         regulator-min-microvolt = <1800000>;
  380                         regulator-max-microvolt = <1800000>;
  381                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  382                 };
  383 
  384                 vreg_l16a_2p7: ldo16 {
  385                         regulator-name = "vreg_l16a_2p7";
  386                         regulator-min-microvolt = <2704000>;
  387                         regulator-max-microvolt = <2960000>;
  388                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  389                 };
  390 
  391                 vreg_l17a_3p0: ldo17 {
  392                         regulator-name = "vreg_l17a_3p0";
  393                         regulator-min-microvolt = <2856000>;
  394                         regulator-max-microvolt = <3008000>;
  395                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  396                 };
  397 
  398                 vreg_l18a_0p92: ldo18 {
  399                         regulator-name = "vreg_l18a_0p92";
  400                         regulator-min-microvolt = <800000>;
  401                         regulator-max-microvolt = <912000>;
  402                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  403                 };
  404 
  405                 vreg_s5a_1p9: smps5 {
  406                         regulator-name = "vreg_s5a_1p9";
  407                         regulator-min-microvolt = <1904000>;
  408                         regulator-max-microvolt = <2000000>;
  409                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  410                 };
  411 
  412                 vreg_s6a_0p95: smps6 {
  413                         regulator-name = "vreg_s6a_0p95";
  414                         regulator-min-microvolt = <920000>;
  415                         regulator-max-microvolt = <1128000>;
  416                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  417                 };
  418         };
  419 
  420         pm8150l-rpmh-regulators {
  421                 compatible = "qcom,pm8150l-rpmh-regulators";
  422                 qcom,pmic-id = "c";
  423 
  424                 vdd-s1-supply = <&vph_pwr>;
  425                 vdd-s2-supply = <&vph_pwr>;
  426                 vdd-s3-supply = <&vph_pwr>;
  427                 vdd-s4-supply = <&vph_pwr>;
  428                 vdd-s5-supply = <&vph_pwr>;
  429                 vdd-s6-supply = <&vph_pwr>;
  430                 vdd-s7-supply = <&vph_pwr>;
  431                 vdd-s8-supply = <&vph_pwr>;
  432                 vdd-l1-l8-supply = <&vreg_s4a_1p8>;
  433                 vdd-l2-l3-supply = <&vreg_s8c_1p3>;
  434                 vdd-l4-l5-l6-supply = <&vreg_bob>;
  435                 vdd-l7-l11-supply = <&vreg_bob>;
  436                 vdd-l9-l10-supply = <&vreg_bob>;
  437                 vdd-bob-supply = <&vph_pwr>;
  438 
  439                 vreg_bob: bob {
  440                         regulator-name = "vreg_bob";
  441                         regulator-min-microvolt = <3008000>;
  442                         regulator-max-microvolt = <4000000>;
  443                         regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
  444                 };
  445 
  446                 vreg_l1c_1p8: ldo1 {
  447                         regulator-name = "vreg_l1c_1p8";
  448                         regulator-min-microvolt = <1800000>;
  449                         regulator-max-microvolt = <1800000>;
  450                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  451                 };
  452 
  453                 vreg_l2c_1p2: ldo2 {
  454                         regulator-name = "vreg_l2c_1p2";
  455                         regulator-min-microvolt = <1200000>;
  456                         regulator-max-microvolt = <1200000>;
  457                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  458                 };
  459 
  460                 vreg_l3c_0p8: ldo3 {
  461                         regulator-name = "vreg_l3c_0p8";
  462                         regulator-min-microvolt = <800000>;
  463                         regulator-max-microvolt = <800000>;
  464                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  465                 };
  466 
  467                 vreg_l4c_1p7: ldo4 {
  468                         regulator-name = "vreg_l4c_1p7";
  469                         regulator-min-microvolt = <1704000>;
  470                         regulator-max-microvolt = <2928000>;
  471                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  472                 };
  473 
  474                 vreg_l5c_1p8: ldo5 {
  475                         regulator-name = "vreg_l5c_1p8";
  476                         regulator-min-microvolt = <1800000>;
  477                         regulator-max-microvolt = <2928000>;
  478                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  479                 };
  480 
  481                 vreg_l6c_2p96: ldo6 {
  482                         regulator-name = "vreg_l6c_2p96";
  483                         regulator-min-microvolt = <1800000>;
  484                         regulator-max-microvolt = <2960000>;
  485                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  486                 };
  487 
  488                 vreg_l7c_cam_vcm0_2p85: ldo7 {
  489                         regulator-name = "vreg_l7c_cam_vcm0_2p85";
  490                         regulator-min-microvolt = <2856000>;
  491                         regulator-max-microvolt = <3104000>;
  492                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  493                 };
  494 
  495                 vreg_l8c_1p8: ldo8 {
  496                         regulator-name = "vreg_l8c_1p8";
  497                         regulator-min-microvolt = <1800000>;
  498                         regulator-max-microvolt = <1800000>;
  499                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  500                 };
  501 
  502                 vreg_l9c_2p96: ldo9 {
  503                         regulator-name = "vreg_l9c_2p96";
  504                         regulator-min-microvolt = <2704000>;
  505                         regulator-max-microvolt = <2960000>;
  506                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  507                 };
  508 
  509                 vreg_l10c_3p0: ldo10 {
  510                         regulator-name = "vreg_l10c_3p0";
  511                         regulator-min-microvolt = <3000000>;
  512                         regulator-max-microvolt = <3000000>;
  513                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  514                 };
  515 
  516                 vreg_l11c_3p3: ldo11 {
  517                         regulator-name = "vreg_l11c_3p3";
  518                         regulator-min-microvolt = <3296000>;
  519                         regulator-max-microvolt = <3296000>;
  520                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  521                         regulator-always-on;
  522                 };
  523 
  524                 vreg_s8c_1p3: smps8 {
  525                         regulator-name = "vreg_s8c_1p3";
  526                         regulator-min-microvolt = <1352000>;
  527                         regulator-max-microvolt = <1352000>;
  528                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  529                 };
  530         };
  531 };
  532 
  533 &cdsp {
  534         status = "okay";
  535         firmware-name = "qcom/sm8250/cdsp.mbn";
  536 };
  537 
  538 &dsi0 {
  539         status = "okay";
  540         vdda-supply = <&vreg_l9a_1p2>;
  541 
  542 #if 0
  543         qcom,dual-dsi-mode;
  544         qcom,master-dsi;
  545 #endif
  546 
  547         ports {
  548                 port@1 {
  549                         endpoint {
  550                                 remote-endpoint = <&lt9611_a>;
  551                                 data-lanes = <0 1 2 3>;
  552                         };
  553                 };
  554         };
  555 };
  556 
  557 &dsi0_phy {
  558         status = "okay";
  559         vdds-supply = <&vreg_l5a_0p88>;
  560 };
  561 
  562 &gmu {
  563         status = "okay";
  564 };
  565 
  566 &gpu {
  567         status = "okay";
  568 
  569         zap-shader {
  570                 memory-region = <&gpu_mem>;
  571                 firmware-name = "qcom/sm8250/a650_zap.mbn";
  572         };
  573 };
  574 
  575 /* LS-I2C0 */
  576 &i2c4 {
  577         status = "okay";
  578 };
  579 
  580 &i2c5 {
  581         status = "okay";
  582         clock-frequency = <400000>;
  583 
  584         lt9611_codec: hdmi-bridge@2b {
  585                 compatible = "lontium,lt9611uxc";
  586                 reg = <0x2b>;
  587                 #sound-dai-cells = <1>;
  588 
  589                 interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>;
  590 
  591                 reset-gpios = <&pm8150l_gpios 5 GPIO_ACTIVE_HIGH>;
  592 
  593                 vdd-supply = <&lt9611_1v2>;
  594                 vcc-supply = <&lt9611_3v3>;
  595 
  596                 pinctrl-names = "default";
  597                 pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
  598 
  599                 ports {
  600                         #address-cells = <1>;
  601                         #size-cells = <0>;
  602 
  603                         port@0 {
  604                                 reg = <0>;
  605 
  606                                 lt9611_a: endpoint {
  607                                         remote-endpoint = <&dsi0_out>;
  608                                 };
  609                         };
  610 
  611 #if 0
  612                         port@1 {
  613                                 reg = <1>;
  614 
  615                                 lt9611_b: endpoint {
  616                                         remote-endpoint = <&dsi1_out>;
  617                                 };
  618                         };
  619 #endif
  620 
  621                         port@2 {
  622                                 reg = <2>;
  623 
  624                                 lt9611_out: endpoint {
  625                                         remote-endpoint = <&hdmi_con>;
  626                                 };
  627                         };
  628 
  629                 };
  630         };
  631 };
  632 
  633 /* LS-I2C1 */
  634 &i2c15 {
  635         status = "okay";
  636 };
  637 
  638 &mdss {
  639         status = "okay";
  640 };
  641 
  642 &mdss_mdp {
  643         status = "okay";
  644 };
  645 
  646 &pm8150_adc {
  647         xo-therm@4c {
  648                 reg = <ADC5_XO_THERM_100K_PU>;
  649                 qcom,ratiometric;
  650                 qcom,hw-settle-time = <200>;
  651         };
  652 
  653         wifi-therm@4e {
  654                 reg = <ADC5_AMUX_THM2_100K_PU>;
  655                 qcom,ratiometric;
  656                 qcom,hw-settle-time = <200>;
  657         };
  658 };
  659 
  660 &pm8150_adc_tm {
  661         status = "okay";
  662 
  663         xo-therm@0 {
  664                 reg = <0>;
  665                 io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
  666                 qcom,ratiometric;
  667                 qcom,hw-settle-time-us = <200>;
  668         };
  669 
  670         wifi-therm@1 {
  671                 reg = <1>;
  672                 io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
  673                 qcom,ratiometric;
  674                 qcom,hw-settle-time-us = <200>;
  675         };
  676 };
  677 
  678 &pcie0 {
  679         status = "okay";
  680 };
  681 
  682 &pcie0_phy {
  683         status = "okay";
  684         vdda-phy-supply = <&vreg_l5a_0p88>;
  685         vdda-pll-supply = <&vreg_l9a_1p2>;
  686 };
  687 
  688 &pcie1 {
  689         status = "okay";
  690 };
  691 
  692 &pcie1_phy {
  693         status = "okay";
  694         vdda-phy-supply = <&vreg_l5a_0p88>;
  695         vdda-pll-supply = <&vreg_l9a_1p2>;
  696 };
  697 
  698 &pcie2 {
  699         status = "okay";
  700 };
  701 
  702 &pcie2_phy {
  703         status = "okay";
  704         vdda-phy-supply = <&vreg_l5a_0p88>;
  705         vdda-pll-supply = <&vreg_l9a_1p2>;
  706 };
  707 
  708 &pm8150_gpios {
  709         gpio-reserved-ranges = <1 1>, <3 2>, <7 1>;
  710         gpio-line-names =
  711                 "NC",
  712                 "OPTION2",
  713                 "PM_GPIO-F",
  714                 "PM_SLP_CLK_IN",
  715                 "OPTION1",
  716                 "VOL_UP_N",
  717                 "PM8250_GPIO7", /* Blue LED */
  718                 "SP_ARI_PWR_ALARM",
  719                 "GPIO_9_P", /* Yellow LED */
  720                 "GPIO_10_P"; /* Green LED */
  721 };
  722 
  723 &pm8150b_adc {
  724         conn-therm@4f {
  725                 reg = <ADC5_AMUX_THM3_100K_PU>;
  726                 qcom,ratiometric;
  727                 qcom,hw-settle-time = <200>;
  728         };
  729 };
  730 
  731 &pm8150b_adc_tm {
  732         status = "okay";
  733 
  734         conn-therm@0 {
  735                 reg = <0>;
  736                 io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
  737                 qcom,ratiometric;
  738                 qcom,hw-settle-time-us = <200>;
  739         };
  740 };
  741 
  742 &pm8150b_gpios {
  743         gpio-line-names =
  744                 "NC",
  745                 "NC",
  746                 "NC",
  747                 "NC",
  748                 "HAP_BOOST_EN", /* SOM */
  749                 "SMB_STAT", /* SOM */
  750                 "NC",
  751                 "NC",
  752                 "SDM_FORCE_USB_BOOT",
  753                 "NC",
  754                 "NC",
  755                 "NC";
  756 };
  757 
  758 &pm8150l_adc {
  759         skin-msm-therm@4e {
  760                 reg = <ADC5_AMUX_THM2_100K_PU>;
  761                 qcom,ratiometric;
  762                 qcom,hw-settle-time = <200>;
  763         };
  764 
  765         pm8150l-therm@4f {
  766                 reg = <ADC5_AMUX_THM3_100K_PU>;
  767                 qcom,ratiometric;
  768                 qcom,hw-settle-time = <200>;
  769         };
  770 };
  771 
  772 &pm8150l_adc_tm {
  773         status = "okay";
  774 
  775         skin-msm-therm@0 {
  776                 reg = <0>;
  777                 io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>;
  778                 qcom,ratiometric;
  779                 qcom,hw-settle-time-us = <200>;
  780         };
  781 
  782         pm8150l-therm@1 {
  783                 reg = <1>;
  784                 io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
  785                 qcom,ratiometric;
  786                 qcom,hw-settle-time-us = <200>;
  787         };
  788 };
  789 
  790 &pm8150l_gpios {
  791         gpio-line-names =
  792                 "NC",
  793                 "PM3003A_EN",
  794                 "NC",
  795                 "NC",
  796                 "PM_GPIO5", /* HDMI RST_N */
  797                 "PM_GPIO-A", /* PWM */
  798                 "PM_GPIO7",
  799                 "NC",
  800                 "NC",
  801                 "PM_GPIO-B",
  802                 "NC",
  803                 "PM3003A_MODE";
  804 
  805         lt9611_rst_pin: lt9611-rst-state {
  806                 pins = "gpio5";
  807                 function = "normal";
  808 
  809                 output-high;
  810                 input-disable;
  811                 power-source = <0>;
  812         };
  813 };
  814 
  815 &pm8150l_lpg {
  816         status = "okay";
  817 
  818         #address-cells = <1>;
  819         #size-cells = <0>;
  820 
  821         led@1 {
  822                 reg = <1>;
  823                 color = <LED_COLOR_ID_GREEN>;
  824                 function = LED_FUNCTION_HEARTBEAT;
  825                 function-enumerator = <3>;
  826 
  827                 linux,default-trigger = "heartbeat";
  828                 default-state = "on";
  829         };
  830 
  831         led@2 {
  832                 reg = <2>;
  833                 color = <LED_COLOR_ID_GREEN>;
  834                 function = LED_FUNCTION_INDICATOR;
  835                 function-enumerator = <2>;
  836                 default-state = "on";
  837         };
  838 
  839         led@3 {
  840                 reg = <3>;
  841                 color = <LED_COLOR_ID_GREEN>;
  842                 function = LED_FUNCTION_INDICATOR;
  843                 function-enumerator = <1>;
  844         };
  845 };
  846 
  847 &pon_pwrkey {
  848         status = "okay";
  849 };
  850 
  851 &pon_resin {
  852         status = "okay";
  853 
  854         linux,code = <KEY_VOLUMEDOWN>;
  855 };
  856 
  857 &qupv3_id_0 {
  858         status = "okay";
  859 };
  860 
  861 &qupv3_id_1 {
  862         status = "okay";
  863 };
  864 
  865 &qupv3_id_2 {
  866         status = "okay";
  867 };
  868 
  869 &q6afedai {
  870         qi2s@16 {
  871                 reg = <PRIMARY_MI2S_RX>;
  872                 qcom,sd-lines = <0 1 2 3>;
  873         };
  874 };
  875 
  876 /* TERT I2S Uses 1 I2S SD Lines for audio on LT9611 HDMI Bridge */
  877 &q6afedai {
  878         qi2s@20 {
  879                 reg = <TERTIARY_MI2S_RX>;
  880                 qcom,sd-lines = <0>;
  881         };
  882 };
  883 
  884 &q6asmdai {
  885         dai@0 {
  886                 reg = <0>;
  887         };
  888 
  889         dai@1 {
  890                 reg = <1>;
  891         };
  892 
  893         dai@2 {
  894                 reg = <2>;
  895         };
  896 };
  897 
  898 &sdhc_2 {
  899         status = "okay";
  900         pinctrl-names = "default";
  901         pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
  902         vmmc-supply = <&vreg_l9c_2p96>;
  903         vqmmc-supply = <&vreg_l6c_2p96>;
  904         cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
  905         bus-width = <4>;
  906         no-sdio;
  907         no-emmc;
  908 };
  909 
  910 &sound {
  911         compatible = "qcom,qrb5165-rb5-sndcard";
  912         pinctrl-0 = <&tert_mi2s_active>;
  913         pinctrl-names = "default";
  914         model = "Qualcomm-RB5-WSA8815-Speakers-DMIC0";
  915         audio-routing =
  916                 "SpkrLeft IN", "WSA_SPK1 OUT",
  917                 "SpkrRight IN", "WSA_SPK2 OUT",
  918                 "VA DMIC0", "vdd-micb",
  919                 "VA DMIC1", "vdd-micb",
  920                 "MM_DL1",  "MultiMedia1 Playback",
  921                 "MM_DL2",  "MultiMedia2 Playback",
  922                 "MultiMedia3 Capture", "MM_UL3";
  923 
  924         mm1-dai-link {
  925                 link-name = "MultiMedia1";
  926                 cpu {
  927                         sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
  928                 };
  929         };
  930 
  931         mm2-dai-link {
  932                 link-name = "MultiMedia2";
  933                 cpu {
  934                         sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
  935                 };
  936         };
  937 
  938         mm3-dai-link {
  939                 link-name = "MultiMedia3";
  940                 cpu {
  941                         sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
  942                 };
  943         };
  944 
  945         hdmi-dai-link {
  946                 link-name = "HDMI Playback";
  947                 cpu {
  948                         sound-dai = <&q6afedai TERTIARY_MI2S_RX>;
  949                 };
  950 
  951                 platform {
  952                         sound-dai = <&q6routing>;
  953                 };
  954 
  955                 codec {
  956                         sound-dai = <&lt9611_codec 0>;
  957                 };
  958         };
  959 
  960         dma-dai-link {
  961                 link-name = "WSA Playback";
  962                 cpu {
  963                         sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>;
  964                 };
  965 
  966                 platform {
  967                         sound-dai = <&q6routing>;
  968                 };
  969 
  970                 codec {
  971                         sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
  972                 };
  973         };
  974 
  975         va-dai-link {
  976                 link-name = "VA Capture";
  977                 cpu {
  978                         sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>;
  979                 };
  980 
  981                 platform {
  982                         sound-dai = <&q6routing>;
  983                 };
  984 
  985                 codec {
  986                         sound-dai = <&vamacro 0>;
  987                 };
  988         };
  989 };
  990 
  991 /* CAN */
  992 &spi0 {
  993         status = "okay";
  994         pinctrl-names = "default";
  995         pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs_gpio>;
  996         cs-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
  997 
  998         can@0 {
  999                 compatible = "microchip,mcp2518fd";
 1000                 reg = <0>;
 1001                 clocks = <&clk40M>;
 1002                 interrupts-extended = <&tlmm 15 IRQ_TYPE_LEVEL_LOW>;
 1003                 spi-max-frequency = <10000000>;
 1004                 vdd-supply = <&vdc_5v>;
 1005                 xceiver-supply = <&vdc_5v>;
 1006         };
 1007 };
 1008 
 1009 &swr0 {
 1010         left_spkr: wsa8810-left{
 1011                 compatible = "sdw10217211000";
 1012                 reg = <0 3>;
 1013                 powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
 1014                 #thermal-sensor-cells = <0>;
 1015                 sound-name-prefix = "SpkrLeft";
 1016                 #sound-dai-cells = <0>;
 1017         };
 1018 
 1019         right_spkr: wsa8810-right{
 1020                 compatible = "sdw10217211000";
 1021                 reg = <0 4>;
 1022                 powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
 1023                 #thermal-sensor-cells = <0>;
 1024                 sound-name-prefix = "SpkrRight";
 1025                 #sound-dai-cells = <0>;
 1026         };
 1027 };
 1028 
 1029 &tlmm {
 1030         gpio-reserved-ranges = <40 4>;
 1031         gpio-line-names =
 1032                 "GPIO-MM",
 1033                 "GPIO-NN",
 1034                 "GPIO-OO",
 1035                 "GPIO-PP",
 1036                 "GPIO-A",
 1037                 "GPIO-C",
 1038                 "GPIO-E",
 1039                 "GPIO-D",
 1040                 "I2C0-SDA",
 1041                 "I2C0-SCL",
 1042                 "GPIO-TT", /* GPIO_10 */
 1043                 "NC",
 1044                 "GPIO_12_I2C_SDA",
 1045                 "GPIO_13_I2C_SCL",
 1046                 "GPIO-X",
 1047                 "GPIO_15_RGMII_INT",
 1048                 "HST_BT_UART_CTS",
 1049                 "HST_BT_UART_RFR",
 1050                 "HST_BT_UART_TX",
 1051                 "HST_BT_UART_RX",
 1052                 "HST_WLAN_EN", /* GPIO_20 */
 1053                 "HST_BT_EN",
 1054                 "GPIO-AAA",
 1055                 "GPIO-BBB",
 1056                 "GPIO-CCC",
 1057                 "GPIO-Z",
 1058                 "GPIO-DDD",
 1059                 "GPIO-BB",
 1060                 "GPIO_28_CAN_SPI_MISO",
 1061                 "GPIO_29_CAN_SPI_MOSI",
 1062                 "GPIO_30_CAN_SPI_CLK", /* GPIO_30 */
 1063                 "GPIO_31_CAN_SPI_CS",
 1064                 "GPIO-UU",
 1065                 "NC",
 1066                 "UART1_TXD_SOM",
 1067                 "UART1_RXD_SOM",
 1068                 "UART0_CTS",
 1069                 "UART0_RTS",
 1070                 "UART0_TXD",
 1071                 "UART0_RXD",
 1072                 "SPI1_MISO", /* GPIO_40 */
 1073                 "SPI1_MOSI",
 1074                 "SPI1_CLK",
 1075                 "SPI1_CS",
 1076                 "I2C1_SDA",
 1077                 "I2C1_SCL",
 1078                 "GPIO-F",
 1079                 "GPIO-JJ",
 1080                 "Board_ID1",
 1081                 "Board_ID2",
 1082                 "NC", /* GPIO_50 */
 1083                 "NC",
 1084                 "SPI0_MISO",
 1085                 "SPI0_MOSI",
 1086                 "SPI0_SCLK",
 1087                 "SPI0_CS",
 1088                 "GPIO-QQ",
 1089                 "GPIO-RR",
 1090                 "USB2LAN_RESET",
 1091                 "USB2LAN_EXTWAKE",
 1092                 "NC", /* GPIO_60 */
 1093                 "NC",
 1094                 "NC",
 1095                 "LT9611_INT",
 1096                 "GPIO-AA",
 1097                 "USB_CC_DIR",
 1098                 "GPIO-G",
 1099                 "GPIO-LL",
 1100                 "USB_DP_HPD_1P8",
 1101                 "NC",
 1102                 "NC", /* GPIO_70 */
 1103                 "SD_CMD",
 1104                 "SD_DAT3",
 1105                 "SD_SCLK",
 1106                 "SD_DAT2",
 1107                 "SD_DAT1",
 1108                 "SD_DAT0", /* BOOT_CFG3 */
 1109                 "SD_UFS_CARD_DET_N",
 1110                 "GPIO-II",
 1111                 "PCIE0_RST_N",
 1112                 "PCIE0_CLK_REQ_N", /* GPIO_80 */
 1113                 "PCIE0_WAKE_N",
 1114                 "GPIO-CC",
 1115                 "GPIO-DD",
 1116                 "GPIO-EE",
 1117                 "GPIO-FF",
 1118                 "GPIO-GG",
 1119                 "GPIO-HH",
 1120                 "GPIO-VV",
 1121                 "GPIO-WW",
 1122                 "NC", /* GPIO_90 */
 1123                 "NC",
 1124                 "GPIO-K",
 1125                 "GPIO-I",
 1126                 "CSI0_MCLK",
 1127                 "CSI1_MCLK",
 1128                 "CSI2_MCLK",
 1129                 "CSI3_MCLK",
 1130                 "GPIO-AA", /* CSI4_MCLK */
 1131                 "GPIO-BB", /* CSI5_MCLK */
 1132                 "GPIO-KK", /* GPIO_100 */
 1133                 "CCI_I2C_SDA0",
 1134                 "CCI_I2C_SCL0",
 1135                 "CCI_I2C_SDA1",
 1136                 "CCI_I2C_SCL1",
 1137                 "CCI_I2C_SDA2",
 1138                 "CCI_I2C_SCL2",
 1139                 "CCI_I2C_SDA3",
 1140                 "CCI_I2C_SCL3",
 1141                 "GPIO-L",
 1142                 "NC", /* GPIO_110 */
 1143                 "NC",
 1144                 "ACCEL_INT",
 1145                 "GYRO_INT",
 1146                 "GPIO-J",
 1147                 "GPIO-YY",
 1148                 "GPIO-H",
 1149                 "GPIO-ZZ",
 1150                 "NC",
 1151                 "NC",
 1152                 "NC", /* GPIO_120 */
 1153                 "NC",
 1154                 "MAG_INT",
 1155                 "MAG_DRDY_INT",
 1156                 "HST_SW_CTRL",
 1157                 "GPIO-M",
 1158                 "GPIO-N",
 1159                 "GPIO-O",
 1160                 "GPIO-P",
 1161                 "PS_INT",
 1162                 "WSA1_EN", /* GPIO_130 */
 1163                 "USB_HUB_RESET",
 1164                 "SDM_FORCE_USB_BOOT",
 1165                 "I2S1_CLK_HDMI",
 1166                 "I2S1_DATA0_HDMI",
 1167                 "I2S1_WS_HDMI",
 1168                 "GPIO-B",
 1169                 "GPIO_137", /* To LT9611_I2S_MCLK_3V3 */
 1170                 "PCM_CLK",
 1171                 "PCM_DI",
 1172                 "PCM_DO", /* GPIO_140 */
 1173                 "PCM_FS",
 1174                 "HST_SLIM_CLK",
 1175                 "HST_SLIM_DATA",
 1176                 "GPIO-U",
 1177                 "GPIO-Y",
 1178                 "GPIO-R",
 1179                 "GPIO-Q",
 1180                 "GPIO-S",
 1181                 "GPIO-T",
 1182                 "GPIO-V", /* GPIO_150 */
 1183                 "GPIO-W",
 1184                 "DMIC_CLK1",
 1185                 "DMIC_DATA1",
 1186                 "DMIC_CLK2",
 1187                 "DMIC_DATA2",
 1188                 "WSA_SWR_CLK",
 1189                 "WSA_SWR_DATA",
 1190                 "DMIC_CLK3",
 1191                 "DMIC_DATA3",
 1192                 "I2C4_SDA", /* GPIO_160 */
 1193                 "I2C4_SCL",
 1194                 "SPI3_CS1",
 1195                 "SPI3_CS2",
 1196                 "SPI2_MISO_LS3",
 1197                 "SPI2_MOSI_LS3",
 1198                 "SPI2_CLK_LS3",
 1199                 "SPI2_ACCEL_CS_LS3",
 1200                 "SPI2_CS1",
 1201                 "NC",
 1202                 "GPIO-SS", /* GPIO_170 */
 1203                 "GPIO-XX",
 1204                 "SPI3_MISO",
 1205                 "SPI3_MOSI",
 1206                 "SPI3_CLK",
 1207                 "SPI3_CS",
 1208                 "HST_BLE_SNS_UART_TX",
 1209                 "HST_BLE_SNS_UART_RX",
 1210                 "HST_WLAN_UART_TX",
 1211                 "HST_WLAN_UART_RX";
 1212 
 1213         lt9611_irq_pin: lt9611-irq {
 1214                 pins = "gpio63";
 1215                 function = "gpio";
 1216                 bias-disable;
 1217         };
 1218 
 1219         sdc2_default_state: sdc2-default {
 1220                 clk {
 1221                         pins = "sdc2_clk";
 1222                         bias-disable;
 1223                         drive-strength = <16>;
 1224                 };
 1225 
 1226                 cmd {
 1227                         pins = "sdc2_cmd";
 1228                         bias-pull-up;
 1229                         drive-strength = <10>;
 1230                 };
 1231 
 1232                 data {
 1233                         pins = "sdc2_data";
 1234                         bias-pull-up;
 1235                         drive-strength = <10>;
 1236                 };
 1237         };
 1238 
 1239         sdc2_card_det_n: sd-card-det-n {
 1240                 pins = "gpio77";
 1241                 function = "gpio";
 1242                 bias-pull-up;
 1243         };
 1244 };
 1245 
 1246 &uart12 {
 1247         status = "okay";
 1248 };
 1249 
 1250 &ufs_mem_hc {
 1251         status = "okay";
 1252 
 1253         vcc-supply = <&vreg_l17a_3p0>;
 1254         vcc-max-microamp = <800000>;
 1255         vccq-supply = <&vreg_l6a_1p2>;
 1256         vccq-max-microamp = <800000>;
 1257         vccq2-supply = <&vreg_s4a_1p8>;
 1258         vccq2-max-microamp = <800000>;
 1259 };
 1260 
 1261 &ufs_mem_phy {
 1262         status = "okay";
 1263 
 1264         vdda-phy-supply = <&vreg_l5a_0p88>;
 1265         vdda-pll-supply = <&vreg_l9a_1p2>;
 1266 };
 1267 
 1268 &usb_1 {
 1269         status = "okay";
 1270 };
 1271 
 1272 &usb_1_dwc3 {
 1273         dr_mode = "peripheral";
 1274 };
 1275 
 1276 &usb_1_hsphy {
 1277         status = "okay";
 1278 
 1279         vdda-pll-supply = <&vreg_l5a_0p88>;
 1280         vdda33-supply = <&vreg_l2a_3p1>;
 1281         vdda18-supply = <&vreg_l12a_1p8>;
 1282 };
 1283 
 1284 &usb_1_qmpphy {
 1285         status = "okay";
 1286 
 1287         vdda-phy-supply = <&vreg_l9a_1p2>;
 1288         vdda-pll-supply = <&vreg_l18a_0p92>;
 1289 };
 1290 
 1291 &usb_2 {
 1292         status = "okay";
 1293 };
 1294 
 1295 &usb_2_dwc3 {
 1296         dr_mode = "host";
 1297 };
 1298 
 1299 &usb_2_hsphy {
 1300         status = "okay";
 1301 
 1302         vdda-pll-supply = <&vreg_l5a_0p88>;
 1303         vdda33-supply = <&vreg_l2a_3p1>;
 1304         vdda18-supply = <&vreg_l12a_1p8>;
 1305 };
 1306 
 1307 &usb_2_qmpphy {
 1308         status = "okay";
 1309 
 1310         vdda-phy-supply = <&vreg_l9a_1p2>;
 1311         vdda-pll-supply = <&vreg_l18a_0p92>;
 1312 };
 1313 
 1314 &vamacro {
 1315         pinctrl-0 = <&dmic01_active>;
 1316         pinctrl-names = "default";
 1317         vdd-micb-supply = <&vreg_s4a_1p8>;
 1318         qcom,dmic-sample-rate = <600000>;
 1319 };
 1320 
 1321 &venus {
 1322         status = "okay";
 1323 };
 1324 
 1325 /* PINCTRL - additions to nodes defined in sm8250.dtsi */
 1326 &qup_spi0_cs_gpio {
 1327         drive-strength = <6>;
 1328         bias-disable;
 1329 };
 1330 
 1331 &qup_spi0_data_clk {
 1332         drive-strength = <6>;
 1333         bias-disable;
 1334 };
Cache object: a589196f6835551c34abb11dd0c5b94b
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.
FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm64/qcom/qrb5165-rb5.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/qcom/qrb5165-rb5.dts
