Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/qcom/sc7280-herobrine-villager-r0.dts
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2 /* 3 * Google Villager board device tree source 4 * 5 * Copyright 2022 Google LLC. 6 */ 7 8 /dts-v1/; 9 10 #include "sc7280-herobrine.dtsi" 11 12 / { 13 model = "Google Villager (rev0+)"; 14 compatible = "google,villager", "qcom,sc7280"; 15 }; 16 17 /* 18 * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES 19 * 20 * Sort order matches the order in the parent files (parents before children). 21 */ 22 23 &pp3300_codec { 24 status = "okay"; 25 }; 26 27 /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ 28 29 ap_tp_i2c: &i2c0 { 30 status = "okay"; 31 clock-frequency = <400000>; 32 33 trackpad: trackpad@2c { 34 compatible = "hid-over-i2c"; 35 reg = <0x2c>; 36 pinctrl-names = "default"; 37 pinctrl-0 = <&tp_int_odl>; 38 39 interrupt-parent = <&tlmm>; 40 interrupts = <7 IRQ_TYPE_EDGE_FALLING>; 41 42 hid-descr-addr = <0x20>; 43 vcc-supply = <&pp3300_z1>; 44 45 wakeup-source; 46 }; 47 }; 48 49 ts_i2c: &i2c13 { 50 status = "okay"; 51 clock-frequency = <400000>; 52 53 ap_ts: touchscreen@10 { 54 compatible = "elan,ekth6915"; 55 reg = <0x10>; 56 pinctrl-names = "default"; 57 pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; 58 59 interrupt-parent = <&tlmm>; 60 interrupts = <55 IRQ_TYPE_LEVEL_LOW>; 61 62 reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; 63 64 vcc33-supply = <&ts_avdd>; 65 }; 66 }; 67 68 &ap_sar_sensor_i2c { 69 status = "okay"; 70 }; 71 72 &ap_sar_sensor0 { 73 status = "okay"; 74 }; 75 76 &ap_sar_sensor1 { 77 status = "okay"; 78 }; 79 80 &mdss_edp { 81 status = "okay"; 82 }; 83 84 &mdss_edp_phy { 85 status = "okay"; 86 }; 87 88 /* For nvme */ 89 &pcie1 { 90 status = "okay"; 91 }; 92 93 /* For nvme */ 94 &pcie1_phy { 95 status = "okay"; 96 }; 97 98 &pwmleds { 99 status = "okay"; 100 }; 101 102 /* For eMMC */ 103 &sdhc_1 { 104 status = "okay"; 105 }; 106 107 /* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ 108 109 &ts_rst_conn { 110 bias-disable; 111 }; 112 113 /* PINCTRL - BOARD-SPECIFIC */ 114 115 /* 116 * Methodology for gpio-line-names: 117 * - If a pin goes to herobrine board and is named it gets that name. 118 * - If a pin goes to herobrine board and is not named, it gets no name. 119 * - If a pin is totally internal to Qcard then it gets Qcard name. 120 * - If a pin is not hooked up on Qcard, it gets no name. 121 */ 122 123 &pm8350c_gpios { 124 gpio-line-names = "FLASH_STROBE_1", /* 1 */ 125 "AP_SUSPEND", 126 "PM8008_1_RST_N", 127 "", 128 "", 129 "", 130 "PMIC_EDP_BL_EN", 131 "PMIC_EDP_BL_PWM", 132 ""; 133 }; 134 135 &tlmm { 136 gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ 137 "AP_TP_I2C_SCL", 138 "SSD_RST_L", 139 "PE_WAKE_ODL", 140 "AP_SAR_SDA", 141 "AP_SAR_SCL", 142 "PRB_SC_GPIO_6", 143 "TP_INT_ODL", 144 "HP_I2C_SDA", 145 "HP_I2C_SCL", 146 147 "GNSS_L1_EN", /* 10 */ 148 "GNSS_L5_EN", 149 "SPI_AP_MOSI", 150 "SPI_AP_MISO", 151 "SPI_AP_CLK", 152 "SPI_AP_CS0_L", 153 /* 154 * AP_FLASH_WP is crossystem ABI. Schematics 155 * call it BIOS_FLASH_WP_OD. 156 */ 157 "AP_FLASH_WP", 158 "", 159 "AP_EC_INT_L", 160 "", 161 162 "UF_CAM_RST_L", /* 20 */ 163 "WF_CAM_RST_L", 164 "UART_AP_TX_DBG_RX", 165 "UART_DBG_TX_AP_RX", 166 "", 167 "PM8008_IRQ_1", 168 "HOST2WLAN_SOL", 169 "WLAN2HOST_SOL", 170 "MOS_BT_UART_CTS", 171 "MOS_BT_UART_RFR", 172 173 "MOS_BT_UART_TX", /* 30 */ 174 "MOS_BT_UART_RX", 175 "PRB_SC_GPIO_32", 176 "HUB_RST_L", 177 "", 178 "", 179 "AP_SPI_FP_MISO", 180 "AP_SPI_FP_MOSI", 181 "AP_SPI_FP_CLK", 182 "AP_SPI_FP_CS_L", 183 184 "AP_EC_SPI_MISO", /* 40 */ 185 "AP_EC_SPI_MOSI", 186 "AP_EC_SPI_CLK", 187 "AP_EC_SPI_CS_L", 188 "LCM_RST_L", 189 "EARLY_EUD_N", 190 "", 191 "DP_HOT_PLUG_DET", 192 "IO_BRD_MLB_ID0", 193 "IO_BRD_MLB_ID1", 194 195 "IO_BRD_MLB_ID2", /* 50 */ 196 "SSD_EN", 197 "TS_I2C_SDA_CONN", 198 "TS_I2C_CLK_CONN", 199 "TS_RST_CONN", 200 "TS_INT_CONN", 201 "AP_I2C_TPM_SDA", 202 "AP_I2C_TPM_SCL", 203 "PRB_SC_GPIO_58", 204 "PRB_SC_GPIO_59", 205 206 "EDP_HOT_PLUG_DET_N", /* 60 */ 207 "FP_TO_AP_IRQ_L", 208 "", 209 "AMP_EN", 210 "CAM0_MCLK_GPIO_64", 211 "CAM1_MCLK_GPIO_65", 212 "WF_CAM_MCLK", 213 "PRB_SC_GPIO_67", 214 "FPMCU_BOOT0", 215 "UF_CAM_SDA", 216 217 "UF_CAM_SCL", /* 70 */ 218 "", 219 "", 220 "WF_CAM_SDA", 221 "WF_CAM_SCL", 222 "", 223 "", 224 "EN_FP_RAILS", 225 "FP_RST_L", 226 "PCIE1_CLKREQ_ODL", 227 228 "EN_PP3300_DX_EDP", /* 80 */ 229 "SC_GPIO_81", 230 "FORCED_USB_BOOT", 231 "WCD_RESET_N", 232 "MOS_WLAN_EN", 233 "MOS_BT_EN", 234 "MOS_SW_CTRL", 235 "MOS_PCIE0_RST", 236 "MOS_PCIE0_CLKREQ_N", 237 "MOS_PCIE0_WAKE_N", 238 239 "MOS_LAA_AS_EN", /* 90 */ 240 "SD_CD_ODL", 241 "", 242 "", 243 "MOS_BT_WLAN_SLIMBUS_CLK", 244 "MOS_BT_WLAN_SLIMBUS_DAT0", 245 "HP_MCLK", 246 "HP_BCLK", 247 "HP_DOUT", 248 "HP_DIN", 249 250 "HP_LRCLK", /* 100 */ 251 "HP_IRQ", 252 "", 253 "", 254 "GSC_AP_INT_ODL", 255 "EN_PP3300_CODEC", 256 "AMP_BCLK", 257 "AMP_DIN", 258 "AMP_LRCLK", 259 "UIM1_DATA_GPIO_109", 260 261 "UIM1_CLK_GPIO_110", /* 110 */ 262 "UIM1_RESET_GPIO_111", 263 "PRB_SC_GPIO_112", 264 "UIM0_DATA", 265 "UIM0_CLK", 266 "UIM0_RST", 267 "UIM0_PRESENT_ODL", 268 "SDM_RFFE0_CLK", 269 "SDM_RFFE0_DATA", 270 "WF_CAM_EN", 271 272 "FASTBOOT_SEL_0", /* 120 */ 273 "SC_GPIO_121", 274 "FASTBOOT_SEL_1", 275 "SC_GPIO_123", 276 "FASTBOOT_SEL_2", 277 "SM_RFFE4_CLK_GRFC_8", 278 "SM_RFFE4_DATA_GRFC_9", 279 "WLAN_COEX_UART1_RX", 280 "WLAN_COEX_UART1_TX", 281 "PRB_SC_GPIO_129", 282 283 "LCM_ID0", /* 130 */ 284 "LCM_ID1", 285 "", 286 "SDR_QLINK_REQ", 287 "SDR_QLINK_EN", 288 "QLINK0_WMSS_RESET_N", 289 "SMR526_QLINK1_REQ", 290 "SMR526_QLINK1_EN", 291 "SMR526_QLINK1_WMSS_RESET_N", 292 "PRB_SC_GPIO_139", 293 294 "SAR1_IRQ_ODL", /* 140 */ 295 "SAR0_IRQ_ODL", 296 "PRB_SC_GPIO_142", 297 "", 298 "WCD_SWR_TX_CLK", 299 "WCD_SWR_TX_DATA0", 300 "WCD_SWR_TX_DATA1", 301 "WCD_SWR_RX_CLK", 302 "WCD_SWR_RX_DATA0", 303 "WCD_SWR_RX_DATA1", 304 305 "DMIC01_CLK", /* 150 */ 306 "DMIC01_DATA", 307 "DMIC23_CLK", 308 "DMIC23_DATA", 309 "", 310 "", 311 "EC_IN_RW_ODL", 312 "HUB_EN", 313 "WCD_SWR_TX_DATA2", 314 "", 315 316 "", /* 160 */ 317 "", 318 "", 319 "", 320 "", 321 "", 322 "", 323 "", 324 "", 325 "", 326 327 "", /* 170 */ 328 "MOS_BLE_UART_TX", 329 "MOS_BLE_UART_RX", 330 "", 331 "", 332 ""; 333 };
Cache object: 89ee38725dd6801cff6d203db4c1a42d
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]