sdm845-mtp.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
    1 // SPDX-License-Identifier: GPL-2.0
    2 /*
    3  * SDM845 MTP board device tree source
    4  *
    5  * Copyright (c) 2018, The Linux Foundation. All rights reserved.
    6  */
    7 
    8 /dts-v1/;
    9 
   10 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
   11 #include "sdm845.dtsi"
   12 #include "pm8998.dtsi"
   13 #include "pmi8998.dtsi"
   14 
   15 / {
   16         model = "Qualcomm Technologies, Inc. SDM845 MTP";
   17         compatible = "qcom,sdm845-mtp", "qcom,sdm845";
   18 
   19         aliases {
   20                 serial0 = &uart9;
   21         };
   22 
   23         chosen {
   24                 stdout-path = "serial0:115200n8";
   25         };
   26 
   27         vph_pwr: vph-pwr-regulator {
   28                 compatible = "regulator-fixed";
   29                 regulator-name = "vph_pwr";
   30                 regulator-min-microvolt = <3700000>;
   31                 regulator-max-microvolt = <3700000>;
   32         };
   33 
   34         /*
   35          * Apparently RPMh does not provide support for PM8998 S4 because it
   36          * is always-on; model it as a fixed regulator.
   37          */
   38         vreg_s4a_1p8: pm8998-smps4 {
   39                 compatible = "regulator-fixed";
   40                 regulator-name = "vreg_s4a_1p8";
   41 
   42                 regulator-min-microvolt = <1800000>;
   43                 regulator-max-microvolt = <1800000>;
   44 
   45                 regulator-always-on;
   46                 regulator-boot-on;
   47 
   48                 vin-supply = <&vph_pwr>;
   49         };
   50 
   51         thermal-zones {
   52                 xo_thermal: xo-thermal {
   53                         polling-delay-passive = <0>;
   54                         polling-delay = <0>;
   55 
   56                         thermal-sensors = <&pm8998_adc_tm 1>;
   57 
   58                         trips {
   59                                 trip-point {
   60                                         temperature = <125000>;
   61                                         hysteresis = <10000>;
   62                                         type = "passive";
   63                                 };
   64                         };
   65                 };
   66 
   67                 msm_thermal: msm-thermal {
   68                         polling-delay-passive = <0>;
   69                         polling-delay = <0>;
   70 
   71                         thermal-sensors = <&pm8998_adc_tm 2>;
   72 
   73                         trips {
   74                                 trip-point {
   75                                         temperature = <125000>;
   76                                         hysteresis = <10000>;
   77                                         type = "passive";
   78                                 };
   79                         };
   80                 };
   81 
   82                 pa_thermal: pa-thermal {
   83                         polling-delay-passive = <0>;
   84                         polling-delay = <0>;
   85 
   86                         thermal-sensors = <&pm8998_adc_tm 3>;
   87 
   88                         trips {
   89                                 trip-point {
   90                                         temperature = <125000>;
   91                                         hysteresis = <10000>;
   92                                         type = "passive";
   93                                 };
   94                         };
   95                 };
   96 
   97                 quiet_thermal: quiet-thermal {
   98                         polling-delay-passive = <0>;
   99                         polling-delay = <0>;
  100 
  101                         thermal-sensors = <&pm8998_adc_tm 4>;
  102 
  103                         trips {
  104                                 trip-point {
  105                                         temperature = <125000>;
  106                                         hysteresis = <10000>;
  107                                         type = "passive";
  108                                 };
  109                         };
  110                 };
  111         };
  112 };
  113 
  114 &adsp_pas {
  115         status = "okay";
  116         firmware-name = "qcom/sdm845/adsp.mdt";
  117 };
  118 
  119 &apps_rsc {
  120         pm8998-rpmh-regulators {
  121                 compatible = "qcom,pm8998-rpmh-regulators";
  122                 qcom,pmic-id = "a";
  123 
  124                 vdd-s1-supply = <&vph_pwr>;
  125                 vdd-s2-supply = <&vph_pwr>;
  126                 vdd-s3-supply = <&vph_pwr>;
  127                 vdd-s4-supply = <&vph_pwr>;
  128                 vdd-s5-supply = <&vph_pwr>;
  129                 vdd-s6-supply = <&vph_pwr>;
  130                 vdd-s7-supply = <&vph_pwr>;
  131                 vdd-s8-supply = <&vph_pwr>;
  132                 vdd-s9-supply = <&vph_pwr>;
  133                 vdd-s10-supply = <&vph_pwr>;
  134                 vdd-s11-supply = <&vph_pwr>;
  135                 vdd-s12-supply = <&vph_pwr>;
  136                 vdd-s13-supply = <&vph_pwr>;
  137                 vdd-l1-l27-supply = <&vreg_s7a_1p025>;
  138                 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
  139                 vdd-l3-l11-supply = <&vreg_s7a_1p025>;
  140                 vdd-l4-l5-supply = <&vreg_s7a_1p025>;
  141                 vdd-l6-supply = <&vph_pwr>;
  142                 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
  143                 vdd-l9-supply = <&vreg_bob>;
  144                 vdd-l10-l23-l25-supply = <&vreg_bob>;
  145                 vdd-l13-l19-l21-supply = <&vreg_bob>;
  146                 vdd-l16-l28-supply = <&vreg_bob>;
  147                 vdd-l18-l22-supply = <&vreg_bob>;
  148                 vdd-l20-l24-supply = <&vreg_bob>;
  149                 vdd-l26-supply = <&vreg_s3a_1p35>;
  150                 vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
  151 
  152                 vreg_s2a_1p125: smps2 {
  153                         regulator-min-microvolt = <1100000>;
  154                         regulator-max-microvolt = <1100000>;
  155                 };
  156 
  157                 vreg_s3a_1p35: smps3 {
  158                         regulator-min-microvolt = <1352000>;
  159                         regulator-max-microvolt = <1352000>;
  160                 };
  161 
  162                 vreg_s5a_2p04: smps5 {
  163                         regulator-min-microvolt = <1904000>;
  164                         regulator-max-microvolt = <2040000>;
  165                 };
  166 
  167                 vreg_s7a_1p025: smps7 {
  168                         regulator-min-microvolt = <900000>;
  169                         regulator-max-microvolt = <1028000>;
  170                 };
  171 
  172                 vdd_qusb_hs0:
  173                 vdda_hp_pcie_core:
  174                 vdda_mipi_csi0_0p9:
  175                 vdda_mipi_csi1_0p9:
  176                 vdda_mipi_csi2_0p9:
  177                 vdda_mipi_dsi0_pll:
  178                 vdda_mipi_dsi1_pll:
  179                 vdda_qlink_lv:
  180                 vdda_qlink_lv_ck:
  181                 vdda_qrefs_0p875:
  182                 vdda_pcie_core:
  183                 vdda_pll_cc_ebi01:
  184                 vdda_pll_cc_ebi23:
  185                 vdda_sp_sensor:
  186                 vdda_ufs1_core:
  187                 vdda_ufs2_core:
  188                 vdda_usb1_ss_core:
  189                 vdda_usb2_ss_core:
  190                 vreg_l1a_0p875: ldo1 {
  191                         regulator-min-microvolt = <880000>;
  192                         regulator-max-microvolt = <880000>;
  193                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  194                 };
  195 
  196                 vddpx_10:
  197                 vreg_l2a_1p2: ldo2 {
  198                         regulator-min-microvolt = <1200000>;
  199                         regulator-max-microvolt = <1200000>;
  200                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  201                         regulator-always-on;
  202                 };
  203 
  204                 vreg_l3a_1p0: ldo3 {
  205                         regulator-min-microvolt = <1000000>;
  206                         regulator-max-microvolt = <1000000>;
  207                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  208                 };
  209 
  210                 vdd_wcss_cx:
  211                 vdd_wcss_mx:
  212                 vdda_wcss_pll:
  213                 vreg_l5a_0p8: ldo5 {
  214                         regulator-min-microvolt = <800000>;
  215                         regulator-max-microvolt = <800000>;
  216                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  217                 };
  218 
  219                 vddpx_13:
  220                 vreg_l6a_1p8: ldo6 {
  221                         regulator-min-microvolt = <1856000>;
  222                         regulator-max-microvolt = <1856000>;
  223                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  224                 };
  225 
  226                 vreg_l7a_1p8: ldo7 {
  227                         regulator-min-microvolt = <1800000>;
  228                         regulator-max-microvolt = <1800000>;
  229                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  230                 };
  231 
  232                 vreg_l8a_1p2: ldo8 {
  233                         regulator-min-microvolt = <1200000>;
  234                         regulator-max-microvolt = <1248000>;
  235                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  236                 };
  237 
  238                 vreg_l9a_1p8: ldo9 {
  239                         regulator-min-microvolt = <1704000>;
  240                         regulator-max-microvolt = <2928000>;
  241                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  242                 };
  243 
  244                 vreg_l10a_1p8: ldo10 {
  245                         regulator-min-microvolt = <1704000>;
  246                         regulator-max-microvolt = <2928000>;
  247                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  248                 };
  249 
  250                 vreg_l11a_1p0: ldo11 {
  251                         regulator-min-microvolt = <1000000>;
  252                         regulator-max-microvolt = <1048000>;
  253                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  254                 };
  255 
  256                 vdd_qfprom:
  257                 vdd_qfprom_sp:
  258                 vdda_apc1_cs_1p8:
  259                 vdda_gfx_cs_1p8:
  260                 vdda_qrefs_1p8:
  261                 vdda_qusb_hs0_1p8:
  262                 vddpx_11:
  263                 vreg_l12a_1p8: ldo12 {
  264                         regulator-min-microvolt = <1800000>;
  265                         regulator-max-microvolt = <1800000>;
  266                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  267                 };
  268 
  269                 vddpx_2:
  270                 vreg_l13a_2p95: ldo13 {
  271                         regulator-min-microvolt = <1800000>;
  272                         regulator-max-microvolt = <2960000>;
  273                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  274                 };
  275 
  276                 vreg_l14a_1p88: ldo14 {
  277                         regulator-min-microvolt = <1800000>;
  278                         regulator-max-microvolt = <1800000>;
  279                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  280                 };
  281 
  282                 vreg_l15a_1p8: ldo15 {
  283                         regulator-min-microvolt = <1800000>;
  284                         regulator-max-microvolt = <1800000>;
  285                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  286                 };
  287 
  288                 vreg_l16a_2p7: ldo16 {
  289                         regulator-min-microvolt = <2704000>;
  290                         regulator-max-microvolt = <2704000>;
  291                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  292                 };
  293 
  294                 vreg_l17a_1p3: ldo17 {
  295                         regulator-min-microvolt = <1304000>;
  296                         regulator-max-microvolt = <1304000>;
  297                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  298                 };
  299 
  300                 vreg_l18a_2p7: ldo18 {
  301                         regulator-min-microvolt = <2704000>;
  302                         regulator-max-microvolt = <2960000>;
  303                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  304                 };
  305 
  306                 vreg_l19a_3p0: ldo19 {
  307                         regulator-min-microvolt = <2856000>;
  308                         regulator-max-microvolt = <3104000>;
  309                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  310                 };
  311 
  312                 vreg_l20a_2p95: ldo20 {
  313                         regulator-min-microvolt = <2704000>;
  314                         regulator-max-microvolt = <2960000>;
  315                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  316                 };
  317 
  318                 vreg_l21a_2p95: ldo21 {
  319                         regulator-min-microvolt = <2704000>;
  320                         regulator-max-microvolt = <2960000>;
  321                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  322                 };
  323 
  324                 vreg_l22a_2p85: ldo22 {
  325                         regulator-min-microvolt = <2864000>;
  326                         regulator-max-microvolt = <3312000>;
  327                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  328                 };
  329 
  330                 vreg_l23a_3p3: ldo23 {
  331                         regulator-min-microvolt = <3000000>;
  332                         regulator-max-microvolt = <3312000>;
  333                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  334                 };
  335 
  336                 vdda_qusb_hs0_3p1:
  337                 vreg_l24a_3p075: ldo24 {
  338                         regulator-min-microvolt = <3088000>;
  339                         regulator-max-microvolt = <3088000>;
  340                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  341                 };
  342 
  343                 vreg_l25a_3p3: ldo25 {
  344                         regulator-min-microvolt = <3300000>;
  345                         regulator-max-microvolt = <3312000>;
  346                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  347                 };
  348 
  349                 vdda_hp_pcie_1p2:
  350                 vdda_hv_ebi0:
  351                 vdda_hv_ebi1:
  352                 vdda_hv_ebi2:
  353                 vdda_hv_ebi3:
  354                 vdda_mipi_csi_1p25:
  355                 vdda_mipi_dsi0_1p2:
  356                 vdda_mipi_dsi1_1p2:
  357                 vdda_pcie_1p2:
  358                 vdda_ufs1_1p2:
  359                 vdda_ufs2_1p2:
  360                 vdda_usb1_ss_1p2:
  361                 vdda_usb2_ss_1p2:
  362                 vreg_l26a_1p2: ldo26 {
  363                         regulator-min-microvolt = <1200000>;
  364                         regulator-max-microvolt = <1200000>;
  365                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  366                 };
  367 
  368                 vreg_l28a_3p0: ldo28 {
  369                         regulator-min-microvolt = <2856000>;
  370                         regulator-max-microvolt = <3008000>;
  371                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  372                 };
  373 
  374                 vreg_lvs1a_1p8: lvs1 {
  375                         regulator-min-microvolt = <1800000>;
  376                         regulator-max-microvolt = <1800000>;
  377                 };
  378 
  379                 vreg_lvs2a_1p8: lvs2 {
  380                         regulator-min-microvolt = <1800000>;
  381                         regulator-max-microvolt = <1800000>;
  382                 };
  383         };
  384 
  385         pmi8998-rpmh-regulators {
  386                 compatible = "qcom,pmi8998-rpmh-regulators";
  387                 qcom,pmic-id = "b";
  388 
  389                 vdd-bob-supply = <&vph_pwr>;
  390 
  391                 vreg_bob: bob {
  392                         regulator-min-microvolt = <3312000>;
  393                         regulator-max-microvolt = <3600000>;
  394                         regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
  395                         regulator-allow-bypass;
  396                 };
  397         };
  398 
  399         pm8005-rpmh-regulators {
  400                 compatible = "qcom,pm8005-rpmh-regulators";
  401                 qcom,pmic-id = "c";
  402 
  403                 vdd-s1-supply = <&vph_pwr>;
  404                 vdd-s2-supply = <&vph_pwr>;
  405                 vdd-s3-supply = <&vph_pwr>;
  406                 vdd-s4-supply = <&vph_pwr>;
  407 
  408                 vreg_s3c_0p6: smps3 {
  409                         regulator-min-microvolt = <600000>;
  410                         regulator-max-microvolt = <600000>;
  411                 };
  412         };
  413 };
  414 
  415 &cdsp_pas {
  416         status = "okay";
  417         firmware-name = "qcom/sdm845/cdsp.mdt";
  418 };
  419 
  420 &dsi0 {
  421         status = "okay";
  422         vdda-supply = <&vdda_mipi_dsi0_1p2>;
  423 
  424         qcom,dual-dsi-mode;
  425         qcom,master-dsi;
  426 
  427         ports {
  428                 port@1 {
  429                         endpoint {
  430                                 remote-endpoint = <&truly_in_0>;
  431                                 data-lanes = <0 1 2 3>;
  432                         };
  433                 };
  434         };
  435 
  436         panel@0 {
  437                 compatible = "truly,nt35597-2K-display";
  438                 reg = <0>;
  439                 vdda-supply = <&vreg_l14a_1p88>;
  440 
  441                 reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
  442                 mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
  443 
  444                 ports {
  445                         #address-cells = <1>;
  446                         #size-cells = <0>;
  447 
  448                         port@0 {
  449                                 reg = <0>;
  450                                 truly_in_0: endpoint {
  451                                         remote-endpoint = <&dsi0_out>;
  452                                 };
  453                         };
  454 
  455                         port@1 {
  456                                 reg = <1>;
  457                                 truly_in_1: endpoint {
  458                                         remote-endpoint = <&dsi1_out>;
  459                                 };
  460                         };
  461                 };
  462         };
  463 };
  464 
  465 &dsi0_phy {
  466         status = "okay";
  467         vdds-supply = <&vdda_mipi_dsi0_pll>;
  468 };
  469 
  470 &dsi1 {
  471         status = "okay";
  472         vdda-supply = <&vdda_mipi_dsi1_1p2>;
  473 
  474         qcom,dual-dsi-mode;
  475 
  476         /* DSI1 is slave, so use DSI0 clocks */
  477         assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
  478 
  479         ports {
  480                 port@1 {
  481                         endpoint {
  482                                 remote-endpoint = <&truly_in_1>;
  483                                 data-lanes = <0 1 2 3>;
  484                         };
  485                 };
  486         };
  487 };
  488 
  489 &dsi1_phy {
  490         status = "okay";
  491         vdds-supply = <&vdda_mipi_dsi1_pll>;
  492 };
  493 
  494 &gcc {
  495         protected-clocks = <GCC_QSPI_CORE_CLK>,
  496                            <GCC_QSPI_CORE_CLK_SRC>,
  497                            <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
  498                            <GCC_LPASS_Q6_AXI_CLK>,
  499                            <GCC_LPASS_SWAY_CLK>;
  500 };
  501 
  502 &gmu {
  503         status = "okay";
  504 };
  505 
  506 &gpu {
  507         status = "okay";
  508 
  509         zap-shader {
  510                 memory-region = <&gpu_mem>;
  511                 firmware-name = "qcom/sdm845/a630_zap.mbn";
  512         };
  513 };
  514 
  515 &i2c10 {
  516         status = "okay";
  517         clock-frequency = <400000>;
  518 };
  519 
  520 &ipa {
  521         status = "okay";
  522         memory-region = <&ipa_fw_mem>;
  523 };
  524 
  525 &mdss {
  526         status = "okay";
  527 };
  528 
  529 &mss_pil {
  530         status = "okay";
  531         firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
  532 };
  533 
  534 &pm8998_adc {
  535         adc-chan@4c {
  536                 reg = <ADC5_XO_THERM_100K_PU>;
  537                 label = "xo_therm";
  538                 qcom,ratiometric;
  539                 qcom,hw-settle-time-us = <200>;
  540         };
  541 
  542         adc-chan@4d {
  543                 reg = <ADC5_AMUX_THM1_100K_PU>;
  544                 label = "msm_therm";
  545                 qcom,ratiometric;
  546                 qcom,hw-settle-time-us = <200>;
  547         };
  548 
  549         adc-chan@4f {
  550                 reg = <ADC5_AMUX_THM3_100K_PU>;
  551                 label = "pa_therm1";
  552                 qcom,ratiometric;
  553                 qcom,hw-settle-time-us = <200>;
  554         };
  555 
  556         adc-chan@51 {
  557                 reg = <ADC5_AMUX_THM5_100K_PU>;
  558                 label = "quiet_therm";
  559                 qcom,ratiometric;
  560                 qcom,hw-settle-time-us = <200>;
  561         };
  562 
  563         adc-chan@83 {
  564                 reg = <ADC5_VPH_PWR>;
  565                 label = "vph_pwr";
  566                 qcom,ratiometric;
  567                 qcom,hw-settle-time-us = <200>;
  568         };
  569 
  570         adc-chan@85 {
  571                 reg = <ADC5_VCOIN>;
  572                 label = "vcoin";
  573                 qcom,ratiometric;
  574                 qcom,hw-settle-time-us = <200>;
  575         };
  576 };
  577 
  578 &pm8998_adc_tm {
  579         status = "okay";
  580 
  581         xo-thermistor@1 {
  582                 reg = <1>;
  583                 io-channels = <&pm8998_adc ADC5_XO_THERM_100K_PU>;
  584                 qcom,ratiometric;
  585                 qcom,hw-settle-time-us = <200>;
  586         };
  587 
  588         msm-thermistor@2 {
  589                 reg = <2>;
  590                 io-channels = <&pm8998_adc ADC5_AMUX_THM1_100K_PU>;
  591                 qcom,ratiometric;
  592                 qcom,hw-settle-time-us = <200>;
  593         };
  594 
  595         pa-thermistor@3 {
  596                 reg = <3>;
  597                 io-channels = <&pm8998_adc ADC5_AMUX_THM3_100K_PU>;
  598                 qcom,ratiometric;
  599                 qcom,hw-settle-time-us = <200>;
  600         };
  601 
  602         quiet-thermistor@4 {
  603                 reg = <4>;
  604                 io-channels = <&pm8998_adc ADC5_AMUX_THM5_100K_PU>;
  605                 qcom,ratiometric;
  606                 qcom,hw-settle-time-us = <200>;
  607         };
  608 };
  609 
  610 &qupv3_id_1 {
  611         status = "okay";
  612 };
  613 
  614 &sdhc_2 {
  615         status = "okay";
  616 
  617         pinctrl-names = "default";
  618         pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>;
  619 
  620         vmmc-supply = <&vreg_l21a_2p95>;
  621         vqmmc-supply = <&vddpx_2>;
  622 
  623         cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
  624 };
  625 
  626 &uart9 {
  627         status = "okay";
  628 };
  629 
  630 &ufs_mem_hc {
  631         status = "okay";
  632 
  633         reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
  634 
  635         vcc-supply = <&vreg_l20a_2p95>;
  636         vcc-max-microamp = <600000>;
  637 };
  638 
  639 &ufs_mem_phy {
  640         status = "okay";
  641 
  642         vdda-phy-supply = <&vdda_ufs1_core>;
  643         vdda-pll-supply = <&vdda_ufs1_1p2>;
  644 };
  645 
  646 &usb_1 {
  647         status = "okay";
  648 };
  649 
  650 &usb_1_dwc3 {
  651         /* Until we have Type C hooked up we'll force this as peripheral. */
  652         dr_mode = "peripheral";
  653 };
  654 
  655 &usb_1_hsphy {
  656         status = "okay";
  657 
  658         vdd-supply = <&vdda_usb1_ss_core>;
  659         vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
  660         vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
  661 
  662         qcom,imp-res-offset-value = <8>;
  663         qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
  664         qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
  665         qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
  666 };
  667 
  668 &usb_1_qmpphy {
  669         status = "okay";
  670 
  671         vdda-phy-supply = <&vdda_usb1_ss_1p2>;
  672         vdda-pll-supply = <&vdda_usb1_ss_core>;
  673 };
  674 
  675 &usb_2 {
  676         status = "okay";
  677 };
  678 
  679 &usb_2_dwc3 {
  680         /*
  681          * Though the USB block on SDM845 can support host, there's no vbus
  682          * signal for this port on MTP.  Thus (unless you have a non-compliant
  683          * hub that works without vbus) the only sensible thing is to force
  684          * peripheral mode.
  685          */
  686         dr_mode = "peripheral";
  687 };
  688 
  689 &usb_2_hsphy {
  690         status = "okay";
  691 
  692         vdd-supply = <&vdda_usb2_ss_core>;
  693         vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
  694         vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
  695 
  696         qcom,imp-res-offset-value = <8>;
  697         qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
  698 };
  699 
  700 &usb_2_qmpphy {
  701         status = "okay";
  702 
  703         vdda-phy-supply = <&vdda_usb2_ss_1p2>;
  704         vdda-pll-supply = <&vdda_usb2_ss_core>;
  705 };
  706 
  707 &venus {
  708         status = "okay";
  709 };
  710 
  711 &wifi {
  712         status = "okay";
  713         vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
  714         vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
  715         vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
  716         vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
  717 };
  718 
  719 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
  720 
  721 &qup_i2c10_default {
  722         pinconf {
  723                 pins = "gpio55", "gpio56";
  724                 drive-strength = <2>;
  725                 bias-disable;
  726         };
  727 };
  728 
  729 &qup_uart9_default {
  730         pinconf-tx {
  731                 pins = "gpio4";
  732                 drive-strength = <2>;
  733                 bias-disable;
  734         };
  735 
  736         pinconf-rx {
  737                 pins = "gpio5";
  738                 drive-strength = <2>;
  739                 bias-pull-up;
  740         };
  741 };
  742 
  743 &tlmm {
  744         gpio-reserved-ranges = <0 4>, <81 4>;
  745 
  746         sdc2_clk: sdc2-clk {
  747                 pinconf {
  748                         pins = "sdc2_clk";
  749                         bias-disable;
  750 
  751                         /*
  752                          * It seems that mmc_test reports errors if drive
  753                          * strength is not 16 on clk, cmd, and data pins.
  754                          */
  755                         drive-strength = <16>;
  756                 };
  757         };
  758 
  759         sdc2_cmd: sdc2-cmd {
  760                 pinconf {
  761                         pins = "sdc2_cmd";
  762                         bias-pull-up;
  763                         drive-strength = <16>;
  764                 };
  765         };
  766 
  767         sdc2_data: sdc2-data {
  768                 pinconf {
  769                         pins = "sdc2_data";
  770                         bias-pull-up;
  771                         drive-strength = <16>;
  772                 };
  773         };
  774 
  775         sd_card_det_n: sd-card-det-n {
  776                 pinmux {
  777                         pins = "gpio126";
  778                         function = "gpio";
  779                 };
  780 
  781                 pinconf {
  782                         pins = "gpio126";
  783                         bias-pull-up;
  784                 };
  785         };
  786 };
Cache object: 0c5800f9c90963f7ba0af77c2b0def0d
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.
FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm64/qcom/sdm845-mtp.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/qcom/sdm845-mtp.dts
