sdm845-oneplus-common.dtsi

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
    1 // SPDX-License-Identifier: GPL-2.0
    2 /*
    3  * SDM845 OnePlus 6(T) (enchilada / fajita) common device tree source
    4  *
    5  * Copyright (c) 2020, The Linux Foundation. All rights reserved.
    6  */
    7 
    8 /dts-v1/;
    9 
   10 #include <dt-bindings/input/linux-event-codes.h>
   11 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
   12 
   13 #include "sdm845.dtsi"
   14 #include "pm8998.dtsi"
   15 #include "pmi8998.dtsi"
   16 
   17 /delete-node/ &rmtfs_mem;
   18 
   19 / {
   20         aliases {
   21                 serial0 = &uart9;
   22                 hsuart0 = &uart6;
   23         };
   24 
   25         chosen {
   26                 stdout-path = "serial0:115200n8";
   27         };
   28 
   29         gpio-keys {
   30                 compatible = "gpio-keys";
   31                 label = "Volume keys";
   32                 autorepeat;
   33 
   34                 pinctrl-names = "default";
   35                 pinctrl-0 = <&volume_down_gpio &volume_up_gpio>;
   36 
   37                 key-vol-down {
   38                         label = "Volume down";
   39                         linux,code = <KEY_VOLUMEDOWN>;
   40                         gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
   41                         debounce-interval = <15>;
   42                 };
   43 
   44                 key-vol-up {
   45                         label = "Volume up";
   46                         linux,code = <KEY_VOLUMEUP>;
   47                         gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
   48                         debounce-interval = <15>;
   49                 };
   50         };
   51 
   52         reserved-memory {
   53                 /* The rmtfs_mem needs to be guarded due to "XPU limitations"
   54                  * it is otherwise possible for an allocation adjacent to the
   55                  * rmtfs_mem region to trigger an XPU violation, causing a crash.
   56                  */
   57                 rmtfs_lower_guard: rmtfs-lower-guard@f5b00000 {
   58                         no-map;
   59                         reg = <0 0xf5b00000 0 0x1000>;
   60                 };
   61                 /*
   62                  * The rmtfs memory region in downstream is 'dynamically allocated'
   63                  * but given the same address every time. Hard code it as this address is
   64                  * where the modem firmware expects it to be.
   65                  */
   66                 rmtfs_mem: rmtfs-mem@f5b01000 {
   67                         compatible = "qcom,rmtfs-mem";
   68                         reg = <0 0xf5b01000 0 0x200000>;
   69                         no-map;
   70 
   71                         qcom,client-id = <1>;
   72                         qcom,vmid = <15>;
   73                 };
   74                 rmtfs_upper_guard: rmtfs-upper-guard@f5d01000 {
   75                         no-map;
   76                         reg = <0 0xf5d01000 0 0x1000>;
   77                 };
   78 
   79                 /*
   80                  * It seems like reserving the old rmtfs_mem region is also needed to prevent
   81                  * random crashes which are most likely modem related, more testing needed.
   82                  */
   83                 removed_region: removed-region@88f00000 {
   84                         no-map;
   85                         reg = <0 0x88f00000 0 0x1c00000>;
   86                 };
   87 
   88                 ramoops: ramoops@ac300000 {
   89                         compatible = "ramoops";
   90                         reg = <0 0xac300000 0 0x400000>;
   91                         record-size = <0x40000>;
   92                         console-size = <0x40000>;
   93                         ftrace-size = <0x40000>;
   94                         pmsg-size = <0x200000>;
   95                         ecc-size = <16>;
   96                 };
   97         };
   98 
   99         vph_pwr: vph-pwr-regulator {
  100                 compatible = "regulator-fixed";
  101                 regulator-name = "vph_pwr";
  102                 regulator-min-microvolt = <3700000>;
  103                 regulator-max-microvolt = <3700000>;
  104         };
  105 
  106         /*
  107          * Apparently RPMh does not provide support for PM8998 S4 because it
  108          * is always-on; model it as a fixed regulator.
  109          */
  110         vreg_s4a_1p8: pm8998-smps4 {
  111                 compatible = "regulator-fixed";
  112                 regulator-name = "vreg_s4a_1p8";
  113 
  114                 regulator-min-microvolt = <1800000>;
  115                 regulator-max-microvolt = <1800000>;
  116 
  117                 regulator-always-on;
  118                 regulator-boot-on;
  119 
  120                 vin-supply = <&vph_pwr>;
  121         };
  122 
  123         /*
  124          * The touchscreen regulator seems to be controlled somehow by a gpio.
  125          * Model it as a fixed regulator and keep it on. Without schematics we
  126          * don't know how this is actually wired up...
  127          */
  128         ts_1p8_supply: ts-1p8-regulator {
  129                 compatible = "regulator-fixed";
  130                 regulator-name = "ts_1p8_supply";
  131 
  132                 regulator-min-microvolt = <1800000>;
  133                 regulator-max-microvolt = <1800000>;
  134 
  135                 gpio = <&tlmm 88 0>;
  136                 enable-active-high;
  137                 regulator-boot-on;
  138         };
  139 };
  140 
  141 &adsp_pas {
  142         status = "okay";
  143         firmware-name = "qcom/sdm845/oneplus6/adsp.mbn";
  144 };
  145 
  146 &apps_rsc {
  147         pm8998-rpmh-regulators {
  148                 compatible = "qcom,pm8998-rpmh-regulators";
  149                 qcom,pmic-id = "a";
  150 
  151                 vdd-s1-supply = <&vph_pwr>;
  152                 vdd-s2-supply = <&vph_pwr>;
  153                 vdd-s3-supply = <&vph_pwr>;
  154                 vdd-s4-supply = <&vph_pwr>;
  155                 vdd-s5-supply = <&vph_pwr>;
  156                 vdd-s6-supply = <&vph_pwr>;
  157                 vdd-s7-supply = <&vph_pwr>;
  158                 vdd-s8-supply = <&vph_pwr>;
  159                 vdd-s9-supply = <&vph_pwr>;
  160                 vdd-s10-supply = <&vph_pwr>;
  161                 vdd-s11-supply = <&vph_pwr>;
  162                 vdd-s12-supply = <&vph_pwr>;
  163                 vdd-s13-supply = <&vph_pwr>;
  164                 vdd-l1-l27-supply = <&vreg_s7a_1p025>;
  165                 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
  166                 vdd-l3-l11-supply = <&vreg_s7a_1p025>;
  167                 vdd-l4-l5-supply = <&vreg_s7a_1p025>;
  168                 vdd-l6-supply = <&vph_pwr>;
  169                 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
  170                 vdd-l9-supply = <&vreg_bob>;
  171                 vdd-l10-l23-l25-supply = <&vreg_bob>;
  172                 vdd-l13-l19-l21-supply = <&vreg_bob>;
  173                 vdd-l16-l28-supply = <&vreg_bob>;
  174                 vdd-l18-l22-supply = <&vreg_bob>;
  175                 vdd-l20-l24-supply = <&vreg_bob>;
  176                 vdd-l26-supply = <&vreg_s3a_1p35>;
  177                 vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
  178 
  179                 vreg_s3a_1p35: smps3 {
  180                         regulator-min-microvolt = <1352000>;
  181                         regulator-max-microvolt = <1352000>;
  182                 };
  183 
  184                 vreg_s5a_2p04: smps5 {
  185                         regulator-min-microvolt = <1904000>;
  186                         regulator-max-microvolt = <2040000>;
  187                 };
  188 
  189                 vreg_s7a_1p025: smps7 {
  190                         regulator-min-microvolt = <900000>;
  191                         regulator-max-microvolt = <1028000>;
  192                 };
  193 
  194                 vdda_mipi_dsi0_pll:
  195                 vdda_qlink_lv:
  196                 vdda_ufs1_core:
  197                 vdda_usb1_ss_core:
  198                 vreg_l1a_0p875: ldo1 {
  199                         regulator-min-microvolt = <880000>;
  200                         regulator-max-microvolt = <880000>;
  201                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  202                 };
  203 
  204                 vreg_l2a_1p2: ldo2 {
  205                         regulator-min-microvolt = <1200000>;
  206                         regulator-max-microvolt = <1200000>;
  207                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  208                         regulator-always-on;
  209                 };
  210 
  211                 vreg_l5a_0p8: ldo5 {
  212                         regulator-min-microvolt = <800000>;
  213                         regulator-max-microvolt = <800000>;
  214                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  215                 };
  216 
  217                 vreg_l7a_1p8: ldo7 {
  218                         regulator-min-microvolt = <1800000>;
  219                         regulator-max-microvolt = <1800000>;
  220                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  221                 };
  222 
  223                 vdda_qusb_hs0_1p8:
  224                 vreg_l12a_1p8: ldo12 {
  225                         regulator-min-microvolt = <1800000>;
  226                         regulator-max-microvolt = <1800000>;
  227                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  228                 };
  229 
  230                 vreg_l14a_1p88: ldo14 {
  231                         regulator-min-microvolt = <1800000>;
  232                         regulator-max-microvolt = <1800000>;
  233                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  234                         regulator-always-on;
  235                 };
  236 
  237                 vreg_l17a_1p3: ldo17 {
  238                         regulator-min-microvolt = <1304000>;
  239                         regulator-max-microvolt = <1304000>;
  240                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  241                 };
  242 
  243                 vreg_l20a_2p95: ldo20 {
  244                         regulator-min-microvolt = <2704000>;
  245                         regulator-max-microvolt = <2960000>;
  246                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  247                 };
  248 
  249                 vreg_l23a_3p3: ldo23 {
  250                         regulator-min-microvolt = <3300000>;
  251                         regulator-max-microvolt = <3312000>;
  252                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  253                 };
  254 
  255                 vdda_qusb_hs0_3p1:
  256                 vreg_l24a_3p075: ldo24 {
  257                         regulator-min-microvolt = <3088000>;
  258                         regulator-max-microvolt = <3088000>;
  259                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  260                 };
  261 
  262                 vreg_l25a_3p3: ldo25 {
  263                         regulator-min-microvolt = <3300000>;
  264                         regulator-max-microvolt = <3312000>;
  265                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  266                 };
  267 
  268                 vdda_mipi_dsi0_1p2:
  269                 vdda_ufs1_1p2:
  270                 vreg_l26a_1p2: ldo26 {
  271                         regulator-min-microvolt = <1200000>;
  272                         regulator-max-microvolt = <1200000>;
  273                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  274                 };
  275 
  276                 vreg_l28a_3p0: ldo28 {
  277                         regulator-min-microvolt = <2856000>;
  278                         regulator-max-microvolt = <3008000>;
  279                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  280                 };
  281         };
  282 
  283         pmi8998-rpmh-regulators {
  284                 compatible = "qcom,pmi8998-rpmh-regulators";
  285                 qcom,pmic-id = "b";
  286 
  287                 vdd-bob-supply = <&vph_pwr>;
  288 
  289                 vreg_bob: bob {
  290                         regulator-min-microvolt = <3312000>;
  291                         regulator-max-microvolt = <3600000>;
  292                         regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
  293                         regulator-allow-bypass;
  294                 };
  295         };
  296 
  297         pm8005-rpmh-regulators {
  298                 compatible = "qcom,pm8005-rpmh-regulators";
  299                 qcom,pmic-id = "c";
  300 
  301                 vdd-s1-supply = <&vph_pwr>;
  302                 vdd-s2-supply = <&vph_pwr>;
  303                 vdd-s3-supply = <&vph_pwr>;
  304                 vdd-s4-supply = <&vph_pwr>;
  305 
  306                 vreg_s3c_0p6: smps3 {
  307                         regulator-min-microvolt = <600000>;
  308                         regulator-max-microvolt = <600000>;
  309                 };
  310         };
  311 };
  312 
  313 &cdsp_pas {
  314         status = "okay";
  315         firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn";
  316 };
  317 
  318 &dsi0 {
  319         status = "okay";
  320         vdda-supply = <&vdda_mipi_dsi0_1p2>;
  321 
  322         /*
  323          * Both devices use different panels but all other properties
  324          * are common. Compatible line is declared in device dts.
  325          */
  326         display_panel: panel@0 {
  327                 status = "disabled";
  328 
  329                 #address-cells = <1>;
  330                 #size-cells = <0>;
  331                 reg = <0>;
  332 
  333                 vddio-supply = <&vreg_l14a_1p88>;
  334 
  335                 reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
  336 
  337                 pinctrl-names = "default";
  338                 pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>;
  339 
  340                 port {
  341                         panel_in: endpoint {
  342                                 remote-endpoint = <&dsi0_out>;
  343                         };
  344                 };
  345         };
  346 };
  347 
  348 &dsi0_out {
  349         remote-endpoint = <&panel_in>;
  350         data-lanes = <0 1 2 3>;
  351 };
  352 
  353 &dsi0_phy {
  354         status = "okay";
  355         vdds-supply = <&vdda_mipi_dsi0_pll>;
  356 };
  357 
  358 &gcc {
  359         protected-clocks = <GCC_QSPI_CORE_CLK>,
  360                                 <GCC_QSPI_CORE_CLK_SRC>,
  361                                 <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
  362                                 <GCC_LPASS_Q6_AXI_CLK>,
  363                                 <GCC_LPASS_SWAY_CLK>;
  364 };
  365 
  366 &gmu {
  367         status = "okay";
  368 };
  369 
  370 &gpu {
  371         status = "okay";
  372 
  373         zap-shader {
  374                 memory-region = <&gpu_mem>;
  375                 firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn";
  376         };
  377 };
  378 
  379 &i2c10 {
  380         status = "okay";
  381         clock-frequency = <100000>;
  382 
  383         bq27441_fg: bq27441-battery@55 {
  384                 compatible = "ti,bq27411";
  385                 status = "okay";
  386                 reg = <0x55>;
  387         };
  388 };
  389 
  390 &i2c12 {
  391         status = "okay";
  392         clock-frequency = <400000>;
  393 
  394         synaptics-rmi4-i2c@20 {
  395                 compatible = "syna,rmi4-i2c";
  396                 reg = <0x20>;
  397                 #address-cells = <1>;
  398                 #size-cells = <0>;
  399                 interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
  400 
  401                 pinctrl-names = "default";
  402                 pinctrl-0 = <&ts_default_pins>;
  403 
  404                 vdd-supply = <&vreg_l28a_3p0>;
  405                 vio-supply = <&ts_1p8_supply>;
  406 
  407                 syna,reset-delay-ms = <200>;
  408                 syna,startup-delay-ms = <200>;
  409 
  410                 rmi4-f01@1 {
  411                         reg = <0x01>;
  412                         syna,nosleep-mode = <1>;
  413                 };
  414 
  415                 rmi4_f12: rmi4-f12@12 {
  416                         reg = <0x12>;
  417                         touchscreen-x-mm = <68>;
  418                         touchscreen-y-mm = <144>;
  419                         syna,sensor-type = <1>;
  420                         syna,rezero-wait-ms = <200>;
  421                 };
  422         };
  423 };
  424 
  425 &ipa {
  426         status = "okay";
  427 
  428         memory-region = <&ipa_fw_mem>;
  429         firmware-name = "qcom/sdm845/oneplus6/ipa_fws.mbn";
  430 };
  431 
  432 &mdss {
  433         status = "okay";
  434 };
  435 
  436 /* Modem/wifi*/
  437 &mss_pil {
  438         status = "okay";
  439         firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn";
  440 };
  441 
  442 &pm8998_gpio {
  443         volume_down_gpio: pm8998-gpio5-state {
  444                 pinconf {
  445                         pins = "gpio5";
  446                         function = "normal";
  447                         input-enable;
  448                         bias-pull-up;
  449                         qcom,drive-strength = <0>;
  450                 };
  451         };
  452 
  453         volume_up_gpio: pm8998-gpio6-state {
  454                 pinconf {
  455                         pins = "gpio6";
  456                         function = "normal";
  457                         input-enable;
  458                         bias-pull-up;
  459                         qcom,drive-strength = <0>;
  460                 };
  461         };
  462 };
  463 
  464 &qupv3_id_1 {
  465         status = "okay";
  466 };
  467 
  468 &qupv3_id_0 {
  469         status = "okay";
  470 };
  471 
  472 &qup_i2c12_default {
  473         mux {
  474                 pins = "gpio49", "gpio50";
  475                 function = "qup12";
  476                 drive-strength = <2>;
  477                 bias-disable;
  478         };
  479 };
  480 
  481 &qup_i2c10_default {
  482         pinconf {
  483                 pins = "gpio55", "gpio56";
  484                 drive-strength = <2>;
  485                 bias-disable;
  486         };
  487 };
  488 
  489 &qup_uart9_default {
  490         pinconf-tx {
  491                 pins = "gpio4";
  492                 drive-strength = <2>;
  493                 bias-disable;
  494         };
  495 
  496         pinconf-rx {
  497                 pins = "gpio5";
  498                 drive-strength = <2>;
  499                 bias-pull-up;
  500         };
  501 };
  502 
  503 /*
  504  * Prevent garbage data on bluetooth UART lines
  505  */
  506 &qup_uart6_default {
  507         pinmux {
  508                 pins = "gpio45", "gpio46", "gpio47", "gpio48";
  509                 function = "qup6";
  510         };
  511 
  512         cts {
  513                 pins = "gpio45";
  514                 bias-pull-down;
  515         };
  516 
  517         rts-tx {
  518                 pins = "gpio46", "gpio47";
  519                 drive-strength = <2>;
  520                 bias-disable;
  521         };
  522 
  523         rx {
  524                 pins = "gpio48";
  525                 bias-pull-up;
  526         };
  527 };
  528 
  529 &uart6 {
  530         status = "okay";
  531 
  532         bluetooth {
  533                 compatible = "qcom,wcn3990-bt";
  534 
  535                 /*
  536                  * This path is relative to the qca/
  537                  * subdir under lib/firmware.
  538                  */
  539                 firmware-name = "oneplus6/crnv21.bin";
  540 
  541                 vddio-supply = <&vreg_s4a_1p8>;
  542                 vddxo-supply = <&vreg_l7a_1p8>;
  543                 vddrf-supply = <&vreg_l17a_1p3>;
  544                 vddch0-supply = <&vreg_l25a_3p3>;
  545                 max-speed = <3200000>;
  546         };
  547 };
  548 
  549 &uart9 {
  550         label = "LS-UART1";
  551         status = "okay";
  552 };
  553 
  554 &ufs_mem_hc {
  555         status = "okay";
  556 
  557         reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
  558 
  559         vcc-supply = <&vreg_l20a_2p95>;
  560         vcc-max-microamp = <600000>;
  561 };
  562 
  563 &ufs_mem_phy {
  564         status = "okay";
  565 
  566         vdda-phy-supply = <&vdda_ufs1_core>;
  567         vdda-pll-supply = <&vdda_ufs1_1p2>;
  568 };
  569 
  570 &usb_1 {
  571         status = "okay";
  572 
  573         /*
  574          * disable USB3 clock requirement as the device only supports
  575          * USB2.
  576          */
  577         qcom,select-utmi-as-pipe-clk;
  578 };
  579 
  580 &usb_1_dwc3 {
  581         /*
  582          * We don't have the capability to switch modes yet.
  583          */
  584         dr_mode = "peripheral";
  585 
  586         /* fastest mode for USB 2 */
  587         maximum-speed = "high-speed";
  588 
  589         /* Remove USB3 phy as it's unused on this device. */
  590         phys = <&usb_1_hsphy>;
  591         phy-names = "usb2-phy";
  592 };
  593 
  594 &usb_1_hsphy {
  595         status = "okay";
  596 
  597         vdd-supply = <&vdda_usb1_ss_core>;
  598         vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
  599         vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
  600 
  601         qcom,imp-res-offset-value = <8>;
  602         qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
  603         qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
  604         qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
  605 };
  606 
  607 &tlmm {
  608         gpio-reserved-ranges = <0 4>, <81 4>;
  609 
  610         tri_state_key_default: tri_state_key_default {
  611                 mux {
  612                         pins = "gpio40", "gpio42", "gpio26";
  613                         function = "gpio";
  614                         drive-strength = <2>;
  615                         bias-disable;
  616                 };
  617         };
  618 
  619         ts_default_pins: ts-int {
  620                 mux {
  621                         pins = "gpio99", "gpio125";
  622                         function = "gpio";
  623                         drive-strength = <16>;
  624                         bias-pull-up;
  625                 };
  626         };
  627 
  628         panel_reset_pins: panel-reset {
  629                 mux {
  630                         pins = "gpio6", "gpio25", "gpio26";
  631                         function = "gpio";
  632                         drive-strength = <8>;
  633                         bias-disable;
  634                 };
  635         };
  636 
  637         panel_te_pin: panel-te {
  638                 mux {
  639                         pins = "gpio10";
  640                         function = "mdp_vsync";
  641                         drive-strength = <2>;
  642                         bias-disable;
  643                         input-enable;
  644                 };
  645         };
  646 
  647         panel_esd_pin: panel-esd {
  648                 mux {
  649                         pins = "gpio30";
  650                         function = "gpio";
  651                         drive-strength = <2>;
  652                         bias-pull-down;
  653                         input-enable;
  654                 };
  655         };
  656 };
  657 
  658 &venus {
  659         status = "okay";
  660         firmware-name = "qcom/sdm845/oneplus6/venus.mbn";
  661 };
  662 
  663 &wifi {
  664         status = "okay";
  665         vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
  666         vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
  667         vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
  668         vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
  669         vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
  670 
  671         qcom,snoc-host-cap-8bit-quirk;
  672 };
Cache object: 747681f2d886a3897a27691b320b3d3a
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.
FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm64/qcom/sdm845-oneplus-common.dtsi

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/qcom/sdm845-oneplus-common.dtsi
