FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/qcom/sm8350-sony-xperia-sagami.dtsi

     // SPDX-License-Identifier: BSD-3-Clause
     /*
      * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
      */
     
     #include "sm8350.dtsi"
     #include "pm8350.dtsi"
     #include "pm8350b.dtsi"
     #include "pm8350c.dtsi"
    #include "pmk8350.dtsi"
    #include "pmr735a.dtsi"
    #include "pmr735b.dtsi"
    
    / {
            /*
             * Yes, you are correct, there is NO MORE {msm,board,pmic}-id on SM8350!
             * Adding it will cause the bootloader to go crazy and randomly crash
             * shortly after closing UEFI boot services.. Perhaps that has something
             * to do with the OS running inside a VM now..?
             */
    
            chassis-type = "handset";
    
            chosen {
                    #address-cells = <2>;
                    #size-cells = <2>;
                    ranges;
    
                    framebuffer: framebuffer@e1000000 {
                            compatible = "simple-framebuffer";
                            reg = <0 0xe1000000 0 0x2300000>;
    
                            /* The display, even though it's 4K, initializes at 1080-ish p */
                            width = <1096>;
                            height = <2560>;
                            stride = <(1096 * 4)>;
                            format = "a8r8g8b8";
                            /*
                             * That's (going to be) a lot of clocks, but it's necessary due
                             * to unused clk cleanup & no panel driver yet
                             */
                            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
                                     <&gcc GCC_DISP_SF_AXI_CLK>;
                    };
            };
    
            gpio-keys {
                    compatible = "gpio-keys";
    
                    /* For reasons still unknown, GAssist key and Camera Focus/Shutter don't work.. */
    
                    key-vol-down {
                            label = "Volume Down";
                            linux,code = <KEY_VOLUMEDOWN>;
                            gpios = <&pmk8350_gpios 3 GPIO_ACTIVE_LOW>;
                            debounce-interval = <15>;
                            linux,can-disable;
                            gpio-key,wakeup;
                    };
            };
    
            reserved-memory {
                    cont_splash_mem: memory@e1000000 {
                            reg = <0 0xe1000000 0 0x2300000>;
                            no-map;
                    };
    
                    ramoops@ffc00000 {
                            compatible = "ramoops";
                            reg = <0 0xffc00000 0 0x100000>;
                            console-size = <0x40000>;
                            record-size = <0x1000>;
                            no-map;
                    };
            };
    };
    
    &adsp {
            status = "okay";
            firmware-name = "qcom/adsp.mbn";
    };
    
    &cdsp {
            status = "okay";
            firmware-name = "qcom/cdsp.mbn";
    };
    
    &i2c1 {
            status = "okay";
            clock-frequency = <1000000>;
    
            /* Some subset of SONY IMX663 camera sensor @ 38 */
    };
    
    &i2c2 {
            status = "okay";
            clock-frequency = <400000>;
    
            /* Richwave RTC6226 FM Radio Receiver @ 64 */
   };
   
   &i2c4 {
           status = "okay";
           clock-frequency = <400000>;
   
           /* Samsung Touchscreen (needs I2C GPI DMA) @ 48 */
   };
   
   &i2c11 {
           status = "okay";
           clock-frequency = <1000000>;
   
           cs35l41_l: cs35l41@40 {
                   compatible = "cirrus,cs35l41";
                   reg = <0x40>;
                   interrupt-parent = <&tlmm>;
                   interrupts = <36 IRQ_TYPE_LEVEL_LOW>;
                   reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
                   cirrus,boost-peak-milliamp = <4000>;
                   cirrus,boost-ind-nanohenry = <1000>;
                   cirrus,boost-cap-microfarad = <15>;
                   cirrus,asp-sdout-hiz = <3>;
                   cirrus,gpio2-src-select = <2>;
                   cirrus,gpio2-output-enable;
                   #sound-dai-cells = <1>;
           };
   
           cs35l41_r: cs35l41@41 {
                   compatible = "cirrus,cs35l41";
                   reg = <0x41>;
                   interrupt-parent = <&tlmm>;
                   interrupts = <36 IRQ_TYPE_LEVEL_LOW>;
                   reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
                   cirrus,boost-peak-milliamp = <4000>;
                   cirrus,boost-ind-nanohenry = <1000>;
                   cirrus,boost-cap-microfarad = <15>;
                   cirrus,asp-sdout-hiz = <3>;
                   cirrus,gpio2-src-select = <2>;
                   cirrus,gpio2-output-enable;
                   #sound-dai-cells = <1>;
           };
   };
   
   &i2c12 {
           status = "okay";
           /* Clock frequency was not specified downstream, let's park it to 100 KHz */
           clock-frequency = <100000>;
   
           /* AMS TCS3490 RGB+IR color sensor @ 72 */
   };
   
   &i2c13 {
           status = "okay";
           /* Clock frequency was not specified downstream, let's park it to 100 KHz */
           clock-frequency = <100000>;
   
           /* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */
           /* Dialog SLG51000 CMIC @ 75 */
   };
   
   &i2c15 {
           status = "okay";
           clock-frequency = <400000>;
   
           /* NXP SN1X0 NFC @ 28 */
   };
   
   &i2c17 {
           status = "okay";
           clock-frequency = <1000000>;
   
           /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
   };
   
   &ipa {
           status = "okay";
           memory-region = <&pil_ipa_fw_mem>;
           firmware-name = "qcom/ipa_fws.mbn";
   };
   
   &mpss {
           status = "okay";
           firmware-name = "qcom/modem.mbn";
   };
   
   &pmk8350_rtc {
           status = "okay";
   };
   
   &pon_pwrkey {
           status = "okay";
   };
   
   &pon_resin {
           status = "okay";
           linux,code = <KEY_VOLUMEUP>;
   };
   
   &qupv3_id_0 {
           status = "okay";
   };
   
   &qupv3_id_1 {
           status = "okay";
   };
   
   &qupv3_id_2 {
           status = "okay";
   };
   
   &slpi {
           status = "okay";
           firmware-name = "qcom/slpi.mbn";
   };
   
   &spi14 {
           status = "okay";
   
           /* NXP SN1X0 NFC Secure Element @ 0 */
   };
   
   &tlmm {
           gpio-reserved-ranges = <44 4>;
   
           ts_int_default: ts-int-default {
                   pin = "gpio23";
                   function = "gpio";
                   drive-strength = <2>;
                   bias-disable;
                   input-enable;
           };
   };
   
   /* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
   &ufs_mem_hc { status = "disabled"; };
   &ufs_mem_phy { status = "disabled"; };
   
   /* TODO: Make USB3 work (perhaps needs regulators for higher-current operation?) */
   &usb_1 {
           status = "okay";
   
           qcom,select-utmi-as-pipe-clk;
   };
   
   &usb_1_dwc3 {
           dr_mode = "peripheral";
   
           maximum-speed = "high-speed";
           phys = <&usb_1_hsphy>;
           phy-names = "usb2-phy";
   };
   
   &usb_1_hsphy {
           status = "okay";
   };
   
   &usb_1_qmpphy {
           status = "okay";
   };

Cache object: 1b054efbf0264110e78966d2b06f2b6e