beacon-renesom-baseboard.dtsi

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
    1 // SPDX-License-Identifier: GPL-2.0
    2 /*
    3  * Copyright 2020, Compass Electronics Group, LLC
    4  */
    5 
    6 #include <dt-bindings/gpio/gpio.h>
    7 #include <dt-bindings/input/input.h>
    8 #include <dt-bindings/clk/versaclock.h>
    9 
   10 / {
   11         backlight_lvds: backlight-lvds {
   12                 compatible = "pwm-backlight";
   13                 power-supply = <&reg_lcd>;
   14                 enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_HIGH>;
   15                 pwms = <&pwm2 0 25000>;
   16                 brightness-levels = <0 4 8 16 32 64 128 255>;
   17                 default-brightness-level = <6>;
   18         };
   19 
   20         backlight_dpi: backlight-dpi {
   21                 compatible = "pwm-backlight";
   22                 power-supply = <&reg_lcd>;
   23                 enable-gpios = <&gpio_exp1 7 GPIO_ACTIVE_LOW>;
   24                 pwms = <&pwm0 0 25000>;
   25                 brightness-levels = <0 25 33 50 63 75 88 100>;
   26                 default-brightness-level = <6>;
   27         };
   28 
   29         hdmi0-out {
   30                 compatible = "hdmi-connector";
   31                 type = "a";
   32 
   33                 port {
   34                         hdmi0_con: endpoint {
   35                                 remote-endpoint = <&rcar_dw_hdmi0_out>;
   36                         };
   37                 };
   38         };
   39 
   40         keys {
   41                 compatible = "gpio-keys";
   42 
   43                 key-1 { /* S19 */
   44                         gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
   45                         linux,code = <KEY_UP>;
   46                         label = "Up";
   47                         wakeup-source;
   48                         debounce-interval = <20>;
   49                 };
   50                 key-2 { /*S20 */
   51                         gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
   52                         linux,code = <KEY_LEFT>;
   53                         label = "Left";
   54                         wakeup-source;
   55                         debounce-interval = <20>;
   56                 };
   57                 key-3 { /* S21 */
   58                         gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
   59                         linux,code = <KEY_DOWN>;
   60                         label = "Down";
   61                         wakeup-source;
   62                         debounce-interval = <20>;
   63                 };
   64                 key-4 { /* S22 */
   65                         gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
   66                         linux,code = <KEY_RIGHT>;
   67                         label = "Right";
   68                         wakeup-source;
   69                         debounce-interval = <20>;
   70                 };
   71                 key-5 { /* S23 */
   72                         gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
   73                         linux,code = <KEY_ENTER>;
   74                         label = "Center";
   75                         wakeup-source;
   76                         debounce-interval = <20>;
   77                 };
   78         };
   79 
   80         leds {
   81                 compatible = "gpio-leds";
   82                 pinctrl-0 = <&led_pins>;
   83                 pinctrl-names = "default";
   84 
   85                 led0 {
   86                         gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
   87                         label = "LED0";
   88                         linux,default-trigger = "heartbeat";
   89                 };
   90                 led1 {
   91                         gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
   92                         label = "LED1";
   93                 };
   94                 led2 {
   95                         gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
   96                         label = "LED2";
   97                 };
   98                 led3 {
   99                         gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
  100                         label = "LED3";
  101                 };
  102         };
  103 
  104         lvds {
  105                 compatible = "panel-lvds";
  106                 power-supply = <&reg_lcd_reset>;
  107                 width-mm = <223>;
  108                 height-mm = <125>;
  109                 backlight = <&backlight_lvds>;
  110                 data-mapping = "vesa-24";
  111 
  112                 panel-timing {
  113                         /* 800x480@60Hz */
  114                         clock-frequency = <30000000>;
  115                         hactive = <800>;
  116                         vactive = <480>;
  117                         hsync-len = <48>;
  118                         hfront-porch = <40>;
  119                         hback-porch = <40>;
  120                         vfront-porch = <13>;
  121                         vback-porch = <29>;
  122                         vsync-len = <1>;
  123                         hsync-active = <1>;
  124                         vsync-active = <3>;
  125                         de-active = <1>;
  126                         pixelclk-active = <0>;
  127                 };
  128 
  129                 port {
  130                         panel_in: endpoint {
  131                                 remote-endpoint = <&lvds0_out>;
  132                         };
  133                 };
  134         };
  135 
  136         rgb {
  137                 /* Different LCD with compatible timings */
  138                 compatible = "rocktech,rk070er9427";
  139                 backlight = <&backlight_dpi>;
  140                 enable-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
  141                 power-supply = <&reg_lcd>;
  142                 port {
  143                         rgb_panel: endpoint {
  144                                 remote-endpoint = <&du_out_rgb>;
  145                         };
  146                 };
  147         };
  148 
  149         reg_audio: regulator-audio {
  150                 compatible = "regulator-fixed";
  151                 regulator-name = "audio-1.8V";
  152                 regulator-min-microvolt = <1800000>;
  153                 regulator-max-microvolt = <1800000>;
  154                 gpio = <&gpio_exp4 1 GPIO_ACTIVE_HIGH>;
  155                 enable-active-high;
  156         };
  157 
  158         reg_lcd: regulator-lcd {
  159                 compatible = "regulator-fixed";
  160                 regulator-name = "lcd_panel_pwr";
  161                 regulator-min-microvolt = <3300000>;
  162                 regulator-max-microvolt = <3300000>;
  163                 gpio = <&gpio_exp1 1 GPIO_ACTIVE_HIGH>;
  164                 enable-active-high;
  165         };
  166 
  167         reg_lcd_reset: regulator-lcd-reset {
  168                 compatible = "regulator-fixed";
  169                 regulator-name = "nLCD_RESET";
  170                 regulator-min-microvolt = <3300000>;
  171                 regulator-max-microvolt = <3300000>;
  172                 gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>;
  173                 enable-active-high;
  174                 vin-supply = <&reg_lcd>;
  175         };
  176 
  177         reg_cam0: regulator-cam0 {
  178                 compatible = "regulator-fixed";
  179                 regulator-name = "reg_cam0";
  180                 regulator-min-microvolt = <1800000>;
  181                 regulator-max-microvolt = <1800000>;
  182                 gpio = <&gpio_exp2 2 GPIO_ACTIVE_HIGH>;
  183                 enable-active-high;
  184         };
  185 
  186         reg_cam1: regulator-cam1 {
  187                 compatible = "regulator-fixed";
  188                 regulator-name = "reg_cam1";
  189                 regulator-min-microvolt = <1800000>;
  190                 regulator-max-microvolt = <1800000>;
  191                 gpio = <&gpio_exp2 5 GPIO_ACTIVE_HIGH>;
  192                 enable-active-high;
  193                 startup-delay-us = <100000>;
  194         };
  195 
  196         sound_card {
  197                 compatible = "audio-graph-card";
  198                 label = "rcar-sound";
  199                 dais = <&rsnd_port0>, <&rsnd_port1>;
  200                 widgets = "Microphone", "Mic Jack",
  201                           "Line", "Line In Jack",
  202                           "Headphone", "Headphone Jack";
  203                 mic-det-gpio = <&gpio0 2 GPIO_ACTIVE_LOW>;
  204                 routing = "Headphone Jack", "HPOUTL",
  205                          "Headphone Jack", "HPOUTR",
  206                          "IN3R", "MICBIAS",
  207                          "Mic Jack", "IN3R";
  208         };
  209 
  210         vccq_sdhi0: regulator-vccq-sdhi0 {
  211                 compatible = "regulator-gpio";
  212                 regulator-name = "SDHI0 VccQ";
  213                 regulator-min-microvolt = <1800000>;
  214                 regulator-max-microvolt = <3300000>;
  215                 gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
  216                 gpios-states = <1>;
  217                 states = <3300000 1>, <1800000 0>;
  218         };
  219 
  220         /* External DU dot clocks */
  221         x302_clk: x302-clock {
  222                 compatible = "fixed-clock";
  223                 #clock-cells = <0>;
  224                 clock-frequency = <33000000>;
  225         };
  226 
  227         x304_clk: x304-clock {
  228                 compatible = "fixed-clock";
  229                 #clock-cells = <0>;
  230                 clock-frequency = <25000000>;
  231         };
  232 
  233         connector {
  234                 compatible = "usb-c-connector";
  235                 label = "USB-C";
  236                 data-role = "dual";
  237 
  238                 ports {
  239                         #address-cells = <1>;
  240                         #size-cells = <0>;
  241                         port@0 {
  242                                 reg = <0>;
  243                                 hs_ep: endpoint {
  244                                         remote-endpoint = <&usb3_hs_ep>;
  245                                 };
  246                         };
  247                         port@1 {
  248                                 reg = <1>;
  249                                 ss_ep: endpoint {
  250                                         remote-endpoint = <&hd3ss3220_in_ep>;
  251                                 };
  252                         };
  253                 };
  254         };
  255 };
  256 
  257 &audio_clk_b {
  258         clock-frequency = <22579200>;
  259 };
  260 
  261 &can0 {
  262         pinctrl-0 = <&can0_pins>;
  263         pinctrl-names = "default";
  264         renesas,can-clock-select = <0x0>;
  265         status = "okay";
  266 };
  267 
  268 &can1 {
  269         pinctrl-0 = <&can1_pins>;
  270         pinctrl-names = "default";
  271         renesas,can-clock-select = <0x0>;
  272         status = "okay";
  273 };
  274 
  275 &du {
  276         ports {
  277                 port@0 {
  278                         du_out_rgb: endpoint {
  279                                 remote-endpoint = <&rgb_panel>;
  280                         };
  281                 };
  282         };
  283 };
  284 
  285 &ehci0 {
  286         dr_mode = "otg";
  287         status = "okay";
  288         clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>;
  289 };
  290 
  291 &ehci1 {
  292         status = "okay";
  293         clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>;
  294 };
  295 
  296 &hdmi0 {
  297         status = "okay";
  298         ports {
  299                 #address-cells = <1>;
  300                 #size-cells = <0>;
  301                 port@0 {
  302                         reg = <0>;
  303                         dw_hdmi0_in: endpoint {
  304                                 remote-endpoint = <&du_out_hdmi0>;
  305                         };
  306                 };
  307                 port@1 {
  308                         reg = <1>;
  309                         rcar_dw_hdmi0_out: endpoint {
  310                                 remote-endpoint = <&hdmi0_con>;
  311                         };
  312                 };
  313                 port@2 {
  314                         reg = <2>;
  315                         dw_hdmi0_snd_in: endpoint {
  316                                 remote-endpoint = <&rsnd_endpoint1>;
  317                         };
  318                 };
  319         };
  320 };
  321 
  322 &hscif1 {
  323         pinctrl-0 = <&hscif1_pins>;
  324         pinctrl-names = "default";
  325         uart-has-rtscts;
  326         status = "okay";
  327 };
  328 
  329 &hsusb {
  330         dr_mode = "otg";
  331         status = "okay";
  332 };
  333 
  334 &i2c2 {
  335         status = "okay";
  336         clock-frequency = <400000>;
  337         pinctrl-0 = <&i2c2_pins>;
  338         pinctrl-names = "default";
  339 
  340         gpio_exp2: gpio@21 {
  341                 compatible = "onnn,pca9654";
  342                 reg = <0x21>;
  343                 gpio-controller;
  344                 #gpio-cells = <2>;
  345         };
  346 
  347         gpio_exp3: gpio@22 {
  348                 compatible = "onnn,pca9654";
  349                 reg = <0x22>;
  350                 gpio-controller;
  351                 #gpio-cells = <2>;
  352         };
  353 
  354         gpio_exp4: gpio@23 {
  355                 compatible = "onnn,pca9654";
  356                 reg = <0x23>;
  357                 gpio-controller;
  358                 #gpio-cells = <2>;
  359         };
  360 
  361         versaclock6_bb: clock-controller@6a {
  362                 compatible = "idt,5p49v6965";
  363                 reg = <0x6a>;
  364                 #clock-cells = <1>;
  365                 clocks = <&x304_clk>;
  366                 clock-names = "xin";
  367 
  368                 assigned-clocks = <&versaclock6_bb 1>, <&versaclock6_bb 2>,
  369                                   <&versaclock6_bb 3>, <&versaclock6_bb 4>;
  370                 assigned-clock-rates = <24000000>, <24000000>, <24000000>,
  371                                        <24576000>;
  372 
  373                 OUT1 {
  374                         idt,mode = <VC5_CMOS>;
  375                         idt,voltage-microvolt = <1800000>;
  376                         idt,slew-percent = <100>;
  377                 };
  378 
  379                 OUT2 {
  380                         idt,mode = <VC5_CMOS>;
  381                         idt,voltage-microvolt = <1800000>;
  382                         idt,slew-percent = <100>;
  383                 };
  384 
  385                 OUT3 {
  386                         idt,mode = <VC5_CMOS>;
  387                         idt,voltage-microvolt = <3300000>;
  388                         idt,slew-percent = <100>;
  389                 };
  390 
  391                 OUT4 {
  392                         idt,mode = <VC5_CMOS>;
  393                         idt,voltage-microvolt = <3300000>;
  394                         idt,slew-percent = <100>;
  395                 };
  396         };
  397 };
  398 
  399 &i2c0 {
  400         status = "okay";
  401         clock-frequency = <400000>;
  402 
  403         pinctrl-0 = <&i2c0_pins>;
  404         pinctrl-names = "default";
  405 };
  406 
  407 &i2c5 {
  408         status = "okay";
  409         clock-frequency = <400000>;
  410         pinctrl-0 = <&i2c5_pins>;
  411         pinctrl-names = "default";
  412 
  413         codec: wm8962@1a {
  414                 compatible = "wlf,wm8962";
  415                 reg = <0x1a>;
  416                 clocks = <&versaclock6_bb 3>;
  417                 DCVDD-supply = <&reg_audio>;
  418                 DBVDD-supply = <&reg_audio>;
  419                 AVDD-supply = <&reg_audio>;
  420                 CPVDD-supply = <&reg_audio>;
  421                 MICVDD-supply = <&reg_audio>;
  422                 PLLVDD-supply = <&reg_audio>;
  423                 SPKVDD1-supply = <&reg_audio>;
  424                 SPKVDD2-supply = <&reg_audio>;
  425                 gpio-cfg = <
  426                         0x0000 /* 0:Default */
  427                         0x0000 /* 1:Default */
  428                         0x0000 /* 2:Default */
  429                         0x0000 /* 3:Default */
  430                         0x0000 /* 4:Default */
  431                         0x0000 /* 5:Default */
  432                 >;
  433                 port {
  434                         wm8962_endpoint: endpoint {
  435                                 remote-endpoint = <&rsnd_endpoint0>;
  436                         };
  437                 };
  438         };
  439 
  440         /* 0 - lcd_reset */
  441         /* 1 - lcd_pwr */
  442         /* 2 - lcd_select */
  443         /* 3 - backlight-enable */
  444         /* 4 - Touch_shdwn */
  445         /* 5 - LCD_H_pol */
  446         /* 6 - lcd_V_pol */
  447         gpio_exp1: gpio@20 {
  448                 compatible = "onnn,pca9654";
  449                 reg = <0x20>;
  450                 gpio-controller;
  451                 #gpio-cells = <2>;
  452         };
  453 
  454         touchscreen@26 {
  455                 compatible = "ilitek,ili2117";
  456                 reg = <0x26>;
  457                 interrupt-parent = <&gpio5>;
  458                 interrupts = <9 IRQ_TYPE_EDGE_RISING>;
  459                 wakeup-source;
  460         };
  461 
  462         hd3ss3220@47 {
  463                 compatible = "ti,hd3ss3220";
  464                 reg = <0x47>;
  465                 interrupt-parent = <&gpio6>;
  466                 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
  467 
  468                 ports {
  469                         #address-cells = <1>;
  470                         #size-cells = <0>;
  471                         port@0 {
  472                                 reg = <0>;
  473                                 hd3ss3220_in_ep: endpoint {
  474                                         remote-endpoint = <&ss_ep>;
  475                                 };
  476                         };
  477                         port@1 {
  478                                 reg = <1>;
  479                                 hd3ss3220_out_ep: endpoint {
  480                                         remote-endpoint = <&usb3_role_switch>;
  481                                 };
  482                         };
  483                 };
  484         };
  485 };
  486 
  487 &lvds0 {
  488         status = "okay";
  489 
  490         ports {
  491                 port@1 {
  492                         lvds0_out: endpoint {
  493                                 remote-endpoint = <&panel_in>;
  494                         };
  495                 };
  496         };
  497 };
  498 
  499 &msiof1 {
  500         pinctrl-0 = <&msiof1_pins>;
  501         pinctrl-names = "default";
  502         status = "okay";
  503         cs-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
  504 };
  505 
  506 &ohci0 {
  507         dr_mode = "otg";
  508         status = "okay";
  509 };
  510 
  511 &ohci1 {
  512         status = "okay";
  513 };
  514 
  515 &pciec0 {
  516         status = "okay";
  517 };
  518 
  519 &pciec1 {
  520         status = "okay";
  521 };
  522 
  523 &pcie_bus_clk {
  524         clock-frequency = <100000000>;
  525 };
  526 
  527 &pfc {
  528         can0_pins: can0 {
  529                 groups = "can0_data_a";
  530                 function = "can0";
  531         };
  532 
  533         can1_pins: can1 {
  534                 groups = "can1_data";
  535                 function = "can1";
  536         };
  537 
  538         du_pins: du {
  539                 groups = "du_rgb888", "du_sync", "du_clk_out_1", "du_disp";
  540                 function = "du";
  541         };
  542 
  543         i2c2_pins: i2c2 {
  544                 groups = "i2c2_a";
  545                 function = "i2c2";
  546         };
  547 
  548         i2c5_pins: i2c5 {
  549                 groups = "i2c5";
  550                 function = "i2c5";
  551         };
  552 
  553         led_pins: leds {
  554                 /* GP_0_4 , AVS1, AVS2, GP_7_3 */
  555                 pins = "GP_0_4", "GP_7_0", "GP_7_1", "GP_7_3";
  556                 bias-pull-down;
  557         };
  558 
  559         msiof1_pins: msiof1 {
  560                 groups = "msiof1_clk_g", "msiof1_rxd_g", "msiof1_txd_g";
  561                 function = "msiof1";
  562         };
  563 
  564         pwm0_pins: pwm0 {
  565                 groups = "pwm0";
  566                 function = "pwm0";
  567         };
  568 
  569         pwm2_pins: pwm2 {
  570                 groups = "pwm2_a";
  571                 function = "pwm2";
  572         };
  573 
  574         sdhi0_pins: sd0 {
  575                 groups = "sdhi0_data4", "sdhi0_ctrl";
  576                 function = "sdhi0";
  577                 power-source = <3300>;
  578         };
  579 
  580         sdhi0_pins_uhs: sd0_uhs {
  581                 groups = "sdhi0_data4", "sdhi0_ctrl";
  582                 function = "sdhi0";
  583                 power-source = <1800>;
  584         };
  585 
  586         sound_pins: sound {
  587                 groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
  588                 function = "ssi";
  589         };
  590 
  591         sound_clk_pins: sound_clk {
  592                 groups = "audio_clk_a_a", "audio_clk_b_a";
  593                 function = "audio_clk";
  594         };
  595 
  596         usb0_pins: usb0 {
  597                 mux {
  598                         groups = "usb0";
  599                         function = "usb0";
  600                 };
  601         };
  602 
  603         usb1_pins: usb1 {
  604                 mux {
  605                         groups = "usb1";
  606                         function = "usb1";
  607                 };
  608         };
  609 
  610         usb30_pins: usb30 {
  611                 mux {
  612                         groups = "usb30";
  613                         function = "usb30";
  614                 };
  615         };
  616 };
  617 
  618 &pwm0 {
  619         pinctrl-0 = <&pwm0_pins>;
  620         pinctrl-names = "default";
  621         status = "okay";
  622 };
  623 
  624 &pwm2 {
  625         pinctrl-0 = <&pwm2_pins>;
  626         pinctrl-names = "default";
  627         status = "okay";
  628 };
  629 
  630 &rcar_sound {
  631         pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
  632         pinctrl-names = "default";
  633 
  634         /* Single DAI */
  635         #sound-dai-cells = <0>;
  636 
  637         /* audio_clkout0/1/2/3 */
  638         #clock-cells = <1>;
  639         clock-frequency = <11289600>;
  640 
  641         status = "okay";
  642 
  643         ports {
  644                 #address-cells = <1>;
  645                 #size-cells = <0>;
  646                 rsnd_port0: port@0 {
  647                         reg = <0>;
  648                         rsnd_endpoint0: endpoint {
  649                                 remote-endpoint = <&wm8962_endpoint>;
  650 
  651                                 dai-format = "i2s";
  652                                 bitclock-master = <&rsnd_endpoint0>;
  653                                 frame-master = <&rsnd_endpoint0>;
  654 
  655                                 playback = <&ssi1>, <&dvc1>, <&src1>;
  656                                 capture = <&ssi0>;
  657                         };
  658                 };
  659                 rsnd_port1: port@1 {
  660                     reg = <0x01>;
  661                         rsnd_endpoint1: endpoint {
  662                                 remote-endpoint = <&dw_hdmi0_snd_in>;
  663 
  664                                 dai-format = "i2s";
  665                                 bitclock-master = <&rsnd_endpoint1>;
  666                                 frame-master = <&rsnd_endpoint1>;
  667 
  668                                 playback = <&ssi2>;
  669                         };
  670                 };
  671         };
  672 };
  673 
  674 &rwdt {
  675         status = "okay";
  676         timeout-sec = <60>;
  677 };
  678 
  679 &scif0 {
  680         pinctrl-0 = <&scif0_pins>;
  681         pinctrl-names = "default";
  682         status = "okay";
  683 };
  684 
  685 &scif5 {
  686         pinctrl-0 = <&scif5_pins>;
  687         pinctrl-names = "default";
  688         status = "okay";
  689 };
  690 
  691 &scif_clk {
  692         clock-frequency = <14745600>;
  693 };
  694 
  695 &sdhi0 {
  696         pinctrl-0 = <&sdhi0_pins>;
  697         pinctrl-1 = <&sdhi0_pins_uhs>;
  698         pinctrl-names = "default", "state_uhs";
  699         vmmc-supply = <&reg_3p3v>;
  700         vqmmc-supply = <&vccq_sdhi0>;
  701         cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
  702         bus-width = <4>;
  703         sd-uhs-sdr50;
  704         sd-uhs-sdr104;
  705         status = "okay";
  706 };
  707 
  708 &ssi1 {
  709         shared-pin;
  710 };
  711 
  712 &tmu0 {
  713         status = "okay";
  714 };
  715 
  716 &tmu1 {
  717         status = "okay";
  718 };
  719 
  720 &tmu2 {
  721         status = "okay";
  722 };
  723 
  724 &tmu3 {
  725         status = "okay";
  726 };
  727 
  728 &tmu4 {
  729         status = "okay";
  730 };
  731 
  732 &usb2_phy0 {
  733         pinctrl-0 = <&usb0_pins>;
  734         pinctrl-names = "default";
  735         status = "okay";
  736 };
  737 
  738 &usb2_phy1 {
  739         pinctrl-0 = <&usb1_pins>;
  740         pinctrl-names = "default";
  741         status = "okay";
  742 };
  743 
  744 &usb3_peri0 {
  745         companion = <&xhci0>;
  746         status = "okay";
  747         usb-role-switch;
  748 
  749         ports {
  750                 #address-cells = <1>;
  751                 #size-cells = <0>;
  752                 port@0 {
  753                         reg = <0>;
  754                         usb3_hs_ep: endpoint {
  755                                 remote-endpoint = <&hs_ep>;
  756                         };
  757                 };
  758                 port@1 {
  759                         reg = <1>;
  760                         usb3_role_switch: endpoint {
  761                                 remote-endpoint = <&hd3ss3220_out_ep>;
  762                         };
  763                 };
  764         };
  765 };
  766 
  767 &usb3_phy0 {
  768         status = "okay";
  769 };
  770 
  771 &vin0 {
  772         status = "okay";
  773 };
  774 &vin1 {
  775         status = "okay";
  776 };
  777 &vin2 {
  778         status = "okay";
  779 };
  780 &vin3 {
  781         status = "okay";
  782 };
  783 &vin4 {
  784         status = "okay";
  785 };
  786 &vin5 {
  787         status = "okay";
  788 };
  789 &vin6 {
  790         status = "okay";
  791 };
  792 &vin7 {
  793         status = "okay";
  794 };
  795 
  796 &xhci0
  797 {
  798         pinctrl-0 = <&usb30_pins>;
  799         pinctrl-names = "default";
  800         status = "okay";
  801 };
Cache object: 261d336c366b95a10f18a17f495b422a
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.
FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm64/renesas/beacon-renesom-baseboard.dtsi

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/renesas/beacon-renesom-baseboard.dtsi
