rk3318-a95x-z2.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
    2 
    3 /dts-v1/;
    4 #include <dt-bindings/input/input.h>
    5 #include "rk3328.dtsi"
    6 
    7 / {
    8         model = "A95X Z2";
    9         compatible = "zkmagic,a95x-z2", "rockchip,rk3318";
   10 
   11         aliases {
   12                 mmc0 = &sdmmc;
   13                 mmc1 = &sdio;
   14                 mmc2 = &emmc;
   15         };
   16 
   17         chosen {
   18                 stdout-path = "serial2:1500000n8";
   19         };
   20 
   21         adc-keys {
   22                 compatible = "adc-keys";
   23                 io-channels = <&saradc 0>;
   24                 io-channel-names = "buttons";
   25                 keyup-threshold-microvolt = <1800000>;
   26                 poll-interval = <100>;
   27 
   28                 recovery {
   29                         label = "recovery";
   30                         linux,code = <KEY_VENDOR>;
   31                         press-threshold-microvolt = <17000>;
   32                 };
   33         };
   34 
   35         ir-receiver {
   36                 compatible = "gpio-ir-receiver";
   37                 gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
   38                 pinctrl-0 = <&ir_int>;
   39                 pinctrl-names = "default";
   40         };
   41 
   42         leds {
   43                 compatible = "gpio-leds";
   44                 pinctrl-0 = <&cyx_led_pin>;
   45                 pinctrl-names = "default";
   46 
   47                 cyx_led: led-0 {
   48                         default-state = "on";
   49                         gpios = <&gpio2 RK_PC7 GPIO_ACTIVE_LOW>;
   50                         label = "CYX_LED";
   51                 };
   52         };
   53 
   54         sdio_pwrseq: sdio-pwrseq {
   55                 compatible = "mmc-pwrseq-simple";
   56                 pinctrl-0 = <&wifi_enable_h>;
   57                 pinctrl-names = "default";
   58                 reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
   59         };
   60 
   61         spdif-sound {
   62                 compatible = "simple-audio-card";
   63                 simple-audio-card,name = "SPDIF";
   64 
   65                 simple-audio-card,cpu {
   66                         sound-dai = <&spdif>;
   67                 };
   68 
   69                 simple-audio-card,codec {
   70                         sound-dai = <&spdif_out>;
   71                 };
   72         };
   73 
   74         spdif_out: spdif-out {
   75                 compatible = "linux,spdif-dit";
   76                 #sound-dai-cells = <0>;
   77         };
   78 
   79         /* Power tree */
   80         vccio_1v8: vccio-1v8-regulator {
   81                 compatible = "regulator-fixed";
   82                 regulator-name = "vccio_1v8";
   83                 regulator-min-microvolt = <1800000>;
   84                 regulator-max-microvolt = <1800000>;
   85                 regulator-always-on;
   86         };
   87 
   88         vccio_3v3: vccio-3v3-regulator {
   89                 compatible = "regulator-fixed";
   90                 regulator-name = "vccio_3v3";
   91                 regulator-min-microvolt = <3300000>;
   92                 regulator-max-microvolt = <3300000>;
   93                 regulator-always-on;
   94         };
   95 
   96         vcc_otg_vbus: otg-vbus-regulator {
   97                 compatible = "regulator-fixed";
   98                 gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
   99                 pinctrl-0 = <&otg_vbus_drv>;
  100                 pinctrl-names = "default";
  101                 regulator-name = "vcc_otg_vbus";
  102                 regulator-min-microvolt = <5000000>;
  103                 regulator-max-microvolt = <5000000>;
  104                 enable-active-high;
  105         };
  106 
  107         vcc_sd: sdmmc-regulator {
  108                 compatible = "regulator-fixed";
  109                 gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
  110                 pinctrl-0 = <&sdmmc0m1_pin>;
  111                 pinctrl-names = "default";
  112                 regulator-name = "vcc_sd";
  113                 regulator-min-microvolt = <3300000>;
  114                 regulator-max-microvolt = <3300000>;
  115                 vin-supply = <&vccio_3v3>;
  116         };
  117 
  118         vdd_arm: vdd-arm {
  119                 compatible = "pwm-regulator";
  120                 pwms = <&pwm0 0 5000 1>;
  121                 regulator-name = "vdd_arm";
  122                 regulator-min-microvolt = <950000>;
  123                 regulator-max-microvolt = <1400000>;
  124                 regulator-settling-time-up-us = <250>;
  125                 regulator-always-on;
  126                 regulator-boot-on;
  127         };
  128 
  129         vdd_log: vdd-log {
  130                 compatible = "pwm-regulator";
  131                 pwms = <&pwm1 0 5000 1>;
  132                 regulator-name = "vdd_log";
  133                 regulator-min-microvolt = <900000>;
  134                 regulator-max-microvolt = <1300000>;
  135                 regulator-settling-time-up-us = <250>;
  136                 regulator-always-on;
  137                 regulator-boot-on;
  138         };
  139 };
  140 
  141 &analog_sound {
  142         status = "okay";
  143 };
  144 
  145 &codec {
  146         status = "okay";
  147 };
  148 
  149 &cpu0 {
  150         cpu-supply = <&vdd_arm>;
  151 };
  152 
  153 &cpu1 {
  154         cpu-supply = <&vdd_arm>;
  155 };
  156 
  157 &cpu2 {
  158         cpu-supply = <&vdd_arm>;
  159 };
  160 
  161 &cpu3 {
  162         cpu-supply = <&vdd_arm>;
  163 };
  164 
  165 &cpu0_opp_table {
  166         opp-1200000000 {
  167                 status = "disabled";
  168         };
  169 
  170         opp-1296000000 {
  171                 status = "disabled";
  172         };
  173 };
  174 
  175 &emmc {
  176         bus-width = <8>;
  177         cap-mmc-highspeed;
  178         non-removable;
  179         pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
  180         pinctrl-names = "default";
  181         status = "okay";
  182 };
  183 
  184 &gmac2phy {
  185         assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
  186         assigned-clock-rate = <50000000>;
  187         assigned-clocks = <&cru SCLK_MAC2PHY>;
  188         status = "okay";
  189 };
  190 
  191 &gpu {
  192         mali-supply = <&vdd_log>;
  193 };
  194 
  195 &hdmi {
  196         status = "okay";
  197 };
  198 
  199 &hdmiphy {
  200         status = "okay";
  201 };
  202 
  203 &hdmi_sound {
  204         status = "okay";
  205 };
  206 
  207 &i2s0 {
  208         status = "okay";
  209 };
  210 
  211 &i2s1 {
  212         status = "okay";
  213 };
  214 
  215 &io_domains {
  216         pmuio-supply = <&vccio_3v3>;
  217         vccio1-supply = <&vccio_3v3>;
  218         vccio2-supply = <&vccio_1v8>;
  219         vccio3-supply = <&vccio_3v3>;
  220         vccio4-supply = <&vccio_1v8>;
  221         vccio5-supply = <&vccio_3v3>;
  222         vccio6-supply = <&vccio_3v3>;
  223         status = "okay";
  224 };
  225 
  226 &pinctrl {
  227         ir {
  228                 ir_int: ir-int {
  229                         rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
  230                 };
  231         };
  232 
  233         leds {
  234                 cyx_led_pin: cyx-led-pin {
  235                         rockchip,pins = <2 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
  236                 };
  237         };
  238 
  239         pwm0 {
  240                 pwm0_pin_pull_up: pwm0-pin-pull-up {
  241                         rockchip,pins = <2 RK_PA4 1 &pcfg_pull_up>;
  242                 };
  243         };
  244 
  245         pwm1 {
  246                 pwm1_pin_pull_up: pwm1-pin-pull-up {
  247                         rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up>;
  248                 };
  249         };
  250 
  251         sdio-pwrseq {
  252                 wifi_enable_h: wifi-enable-h {
  253                         rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
  254                 };
  255         };
  256 
  257         sdmmc1 {
  258                 clk_32k_out: clk-32k-out {
  259                         rockchip,pins = <1 RK_PD4 1 &pcfg_pull_none>;
  260                 };
  261         };
  262 
  263         usb {
  264                 host_vbus_drv: host-vbus-drv {
  265                         rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
  266                 };
  267 
  268                 otg_vbus_drv: otg-vbus-drv {
  269                         rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
  270                 };
  271         };
  272 };
  273 
  274 &pwm0 {
  275         pinctrl-0 = <&pwm0_pin_pull_up>;
  276         pinctrl-names = "active";
  277         status = "okay";
  278 };
  279 
  280 &pwm1 {
  281         pinctrl-0 = <&pwm1_pin_pull_up>;
  282         pinctrl-names = "active";
  283         status = "okay";
  284 };
  285 
  286 &saradc {
  287         vref-supply = <&vccio_1v8>;
  288         status = "okay";
  289 };
  290 
  291 &sdio {
  292         bus-width = <4>;
  293         cap-sd-highspeed;
  294         cap-sdio-irq;
  295         keep-power-in-suspend;
  296         max-frequency = <125000000>;
  297         mmc-pwrseq = <&sdio_pwrseq>;
  298         non-removable;
  299         pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &clk_32k_out>;
  300         pinctrl-names = "default";
  301         sd-uhs-sdr104;
  302         status = "okay";
  303 };
  304 
  305 &sdmmc {
  306         bus-width = <4>;
  307         cap-sd-highspeed;
  308         pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
  309         pinctrl-names = "default";
  310         vmmc-supply = <&vcc_sd>;
  311         status = "okay";
  312 };
  313 
  314 &spdif {
  315         pinctrl-0 = <&spdifm0_tx>;
  316         status = "okay";
  317 };
  318 
  319 &soc_crit {
  320         temperature = <115000>; /* millicelsius */
  321 };
  322 
  323 &target {
  324         temperature = <105000>; /* millicelsius */
  325 };
  326 
  327 &threshold {
  328         temperature = <90000>; /* millicelsius */
  329 };
  330 
  331 &tsadc {
  332         rockchip,hw-tshut-temp = <120000>;
  333         status = "okay";
  334 };
  335 
  336 &u2phy {
  337         status = "okay";
  338 };
  339 
  340 &u2phy_host {
  341         status = "okay";
  342 };
  343 
  344 &u2phy_otg {
  345         phy-supply = <&vcc_otg_vbus>;
  346         status = "okay";
  347 };
  348 
  349 &uart0 {
  350         pinctrl-0 = <&uart0_xfer &uart0_cts>;
  351         status = "okay";
  352 };
  353 
  354 &uart2 {
  355         status = "okay";
  356 };
  357 
  358 &usb20_otg {
  359         dr_mode = "host";
  360         status = "okay";
  361 };
  362 
  363 &usbdrd3 {
  364         dr_mode = "host";
  365         status = "okay";
  366 };
  367 
  368 &usb_host0_ehci {
  369         status = "okay";
  370 };
  371 
  372 &usb_host0_ohci {
  373         status = "okay";
  374 };
  375 
  376 &vop {
  377         status = "okay";
  378 };
  379 
  380 &vop_mmu {
  381         status = "okay";
  382 };

Cache object: 55f9a38023263647fa39a145f15d6080

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm64/rockchip/rk3318-a95x-z2.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/rockchip/rk3318-a95x-z2.dts