Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/rockchip/rk3399pro-vmarc-som.dtsi
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2 /* 3 * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd 4 * Copyright (c) 2019 Vamrs Limited 5 * Copyright (c) 2019 Amarula Solutions(India) 6 */ 7 8 #include <dt-bindings/gpio/gpio.h> 9 #include <dt-bindings/pinctrl/rockchip.h> 10 #include <dt-bindings/pwm/pwm.h> 11 12 / { 13 compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro"; 14 15 aliases { 16 mmc0 = &sdmmc; 17 mmc1 = &sdhci; 18 }; 19 20 vcc3v3_pcie: vcc-pcie-regulator { 21 compatible = "regulator-fixed"; 22 enable-active-high; 23 gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>; 24 pinctrl-names = "default"; 25 pinctrl-0 = <&pcie_pwr>; 26 regulator-name = "vcc3v3_pcie"; 27 regulator-always-on; 28 regulator-boot-on; 29 vin-supply = <&vcc5v0_sys>; 30 }; 31 }; 32 33 &cpu_l0 { 34 cpu-supply = <&vdd_cpu_l>; 35 }; 36 37 &cpu_l1 { 38 cpu-supply = <&vdd_cpu_l>; 39 }; 40 41 &cpu_l2 { 42 cpu-supply = <&vdd_cpu_l>; 43 }; 44 45 &cpu_l3 { 46 cpu-supply = <&vdd_cpu_l>; 47 }; 48 49 &emmc_phy { 50 status = "okay"; 51 }; 52 53 &gmac { 54 assigned-clocks = <&cru SCLK_RMII_SRC>; 55 phy-supply = <&vcc_lan>; 56 snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; 57 }; 58 59 &hdmi { 60 ddc-i2c-bus = <&i2c3>; 61 pinctrl-names = "default"; 62 pinctrl-0 = <&hdmi_cec>; 63 }; 64 65 &i2c0 { 66 clock-frequency = <400000>; 67 i2c-scl-falling-time-ns = <30>; 68 i2c-scl-rising-time-ns = <180>; 69 status = "okay"; 70 71 rk809: pmic@20 { 72 compatible = "rockchip,rk809"; 73 reg = <0x20>; 74 interrupt-parent = <&gpio1>; 75 interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>; 76 #clock-cells = <1>; 77 clock-output-names = "rk808-clkout1", "rk808-clkout2"; 78 pinctrl-names = "default"; 79 pinctrl-0 = <&pmic_int_l>; 80 rockchip,system-power-controller; 81 wakeup-source; 82 83 vcc1-supply = <&vcc5v0_sys>; 84 vcc2-supply = <&vcc5v0_sys>; 85 vcc3-supply = <&vcc5v0_sys>; 86 vcc4-supply = <&vcc5v0_sys>; 87 vcc5-supply = <&vcc_buck5>; 88 vcc6-supply = <&vcc_buck5>; 89 vcc7-supply = <&vcc5v0_sys>; 90 vcc8-supply = <&vcc3v3_sys>; 91 vcc9-supply = <&vcc5v0_sys>; 92 93 regulators { 94 vdd_log: DCDC_REG1 { 95 regulator-name = "vdd_log"; 96 regulator-always-on; 97 regulator-boot-on; 98 regulator-min-microvolt = <750000>; 99 regulator-max-microvolt = <1350000>; 100 regulator-initial-mode = <0x2>; 101 regulator-state-mem { 102 regulator-off-in-suspend; 103 regulator-suspend-microvolt = <900000>; 104 }; 105 }; 106 107 vdd_cpu_l: DCDC_REG2 { 108 regulator-name = "vdd_cpu_l"; 109 regulator-always-on; 110 regulator-boot-on; 111 regulator-min-microvolt = <750000>; 112 regulator-max-microvolt = <1350000>; 113 regulator-ramp-delay = <6001>; 114 regulator-initial-mode = <0x2>; 115 regulator-state-mem { 116 regulator-off-in-suspend; 117 }; 118 }; 119 120 vcc_ddr: DCDC_REG3 { 121 regulator-name = "vcc_ddr"; 122 regulator-always-on; 123 regulator-boot-on; 124 regulator-initial-mode = <0x2>; 125 regulator-state-mem { 126 regulator-on-in-suspend; 127 }; 128 }; 129 130 vcc3v3_sys: DCDC_REG4 { 131 regulator-name = "vcc3v3_sys"; 132 regulator-always-on; 133 regulator-boot-on; 134 regulator-min-microvolt = <3300000>; 135 regulator-max-microvolt = <3300000>; 136 regulator-initial-mode = <0x2>; 137 regulator-state-mem { 138 regulator-on-in-suspend; 139 regulator-suspend-microvolt = <3300000>; 140 }; 141 }; 142 143 vcc_buck5: DCDC_REG5 { 144 regulator-name = "vcc_buck5"; 145 regulator-always-on; 146 regulator-boot-on; 147 regulator-min-microvolt = <2200000>; 148 regulator-max-microvolt = <2200000>; 149 regulator-state-mem { 150 regulator-on-in-suspend; 151 regulator-suspend-microvolt = <2200000>; 152 }; 153 }; 154 155 vcca_0v9: LDO_REG1 { 156 regulator-name = "vcca_0v9"; 157 regulator-always-on; 158 regulator-boot-on; 159 regulator-min-microvolt = <900000>; 160 regulator-max-microvolt = <900000>; 161 regulator-state-mem { 162 regulator-on-in-suspend; 163 regulator-suspend-microvolt = <900000>; 164 }; 165 }; 166 167 vcc_1v8: LDO_REG2 { 168 regulator-name = "vcc_1v8"; 169 regulator-always-on; 170 regulator-boot-on; 171 regulator-min-microvolt = <1800000>; 172 regulator-max-microvolt = <1800000>; 173 regulator-state-mem { 174 regulator-on-in-suspend; 175 regulator-suspend-microvolt = <1800000>; 176 }; 177 }; 178 179 vcc_0v9: LDO_REG3 { 180 regulator-name = "vcc_0v9"; 181 regulator-always-on; 182 regulator-boot-on; 183 regulator-min-microvolt = <900000>; 184 regulator-max-microvolt = <900000>; 185 regulator-state-mem { 186 regulator-on-in-suspend; 187 regulator-suspend-microvolt = <900000>; 188 }; 189 }; 190 191 vcca_1v8: LDO_REG4 { 192 regulator-name = "vcca_1v8"; 193 regulator-always-on; 194 regulator-boot-on; 195 regulator-min-microvolt = <1850000>; 196 regulator-max-microvolt = <1850000>; 197 regulator-state-mem { 198 regulator-on-in-suspend; 199 regulator-suspend-microvolt = <1850000>; 200 }; 201 }; 202 203 /* 204 * As per BSP, but schematic not showing any regulator 205 * pin for LD05. 206 */ 207 vdd1v5_dvp: LDO_REG5 { 208 regulator-name = "vdd1v5_dvp"; 209 regulator-always-on; 210 regulator-boot-on; 211 regulator-min-microvolt = <1500000>; 212 regulator-max-microvolt = <1500000>; 213 regulator-state-mem { 214 regulator-off-in-suspend; 215 }; 216 }; 217 218 vcc_1v5: LDO_REG6 { 219 regulator-name = "vcc_1v5"; 220 regulator-always-on; 221 regulator-boot-on; 222 regulator-min-microvolt = <1500000>; 223 regulator-max-microvolt = <1500000>; 224 regulator-state-mem { 225 regulator-off-in-suspend; 226 }; 227 }; 228 229 vccio_3v0: LDO_REG7 { 230 regulator-name = "vccio_3v0"; 231 regulator-always-on; 232 regulator-boot-on; 233 regulator-min-microvolt = <3000000>; 234 regulator-max-microvolt = <3000000>; 235 regulator-state-mem { 236 regulator-off-in-suspend; 237 }; 238 }; 239 240 vccio_sd: LDO_REG8 { 241 regulator-name = "vccio_sd"; 242 regulator-always-on; 243 regulator-boot-on; 244 regulator-min-microvolt = <1800000>; 245 regulator-max-microvolt = <3300000>; 246 regulator-state-mem { 247 regulator-off-in-suspend; 248 }; 249 }; 250 251 /* 252 * As per BSP, but schematic not showing any regulator 253 * pin for LD09. 254 */ 255 vcc_sd: LDO_REG9 { 256 regulator-name = "vcc_sd"; 257 regulator-always-on; 258 regulator-boot-on; 259 regulator-min-microvolt = <3300000>; 260 regulator-max-microvolt = <3300000>; 261 regulator-state-mem { 262 regulator-off-in-suspend; 263 }; 264 }; 265 266 vcc5v0_usb2: SWITCH_REG1 { 267 regulator-name = "vcc5v0_usb2"; 268 regulator-min-microvolt = <5000000>; 269 regulator-max-microvolt = <5000000>; 270 regulator-state-mem { 271 regulator-on-in-suspend; 272 regulator-suspend-microvolt = <5000000>; 273 }; 274 }; 275 276 vccio_3v3: vcc_lan: SWITCH_REG2 { 277 regulator-name = "vccio_3v3"; 278 regulator-always-on; 279 regulator-boot-on; 280 regulator-min-microvolt = <3300000>; 281 regulator-max-microvolt = <3300000>; 282 regulator-state-mem { 283 regulator-off-in-suspend; 284 }; 285 }; 286 }; 287 }; 288 }; 289 290 &i2c1 { 291 i2c-scl-falling-time-ns = <30>; 292 i2c-scl-rising-time-ns = <140>; 293 status = "okay"; 294 }; 295 296 &i2c2 { 297 clock-frequency = <400000>; 298 status = "okay"; 299 300 hym8563: hym8563@51 { 301 compatible = "haoyu,hym8563"; 302 reg = <0x51>; 303 #clock-cells = <0>; 304 clock-frequency = <32768>; 305 clock-output-names = "hym8563"; 306 pinctrl-names = "default"; 307 pinctrl-0 = <&hym8563_int>; 308 interrupt-parent = <&gpio4>; 309 interrupts = <RK_PD6 IRQ_TYPE_LEVEL_LOW>; 310 }; 311 }; 312 313 &i2c3 { 314 i2c-scl-rising-time-ns = <450>; 315 i2c-scl-falling-time-ns = <15>; 316 status = "okay"; 317 }; 318 319 &io_domains { 320 status = "okay"; 321 bt656-supply = <&vcca_1v8>; 322 gpio1830-supply = <&vccio_3v0>; 323 sdmmc-supply = <&vccio_sd>; 324 }; 325 326 &pcie_phy { 327 status = "okay"; 328 }; 329 330 &pcie0 { 331 ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; 332 num-lanes = <4>; 333 pinctrl-0 = <&pcie_clkreqnb_cpm>; 334 pinctrl-names = "default"; 335 vpcie0v9-supply = <&vcca_0v9>; /* VCC_0V9_S0 */ 336 vpcie1v8-supply = <&vcca_1v8>; /* VCC_1V8_S0 */ 337 vpcie3v3-supply = <&vcc3v3_pcie>; 338 status = "okay"; 339 }; 340 341 &pinctrl { 342 hym8563 { 343 hym8563_int: hym8563-int { 344 rockchip,pins = <4 RK_PD6 0 &pcfg_pull_up>; 345 }; 346 }; 347 348 pcie { 349 pcie_pwr: pcie-pwr { 350 rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; 351 }; 352 }; 353 354 pmic { 355 pmic_int_l: pmic-int-l { 356 rockchip,pins = <1 RK_PC2 0 &pcfg_pull_up>; 357 }; 358 }; 359 360 sdio-pwrseq { 361 wifi_enable_h: wifi-enable-h { 362 rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; 363 }; 364 }; 365 366 vbus_host { 367 usb1_en_oc: usb1-en-oc { 368 rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>; 369 }; 370 }; 371 372 vbus_typec { 373 usb0_en_oc: usb0-en-oc { 374 rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; 375 }; 376 }; 377 }; 378 379 &pmu_io_domains { 380 status = "okay"; 381 pmu1830-supply = <&vcc_1v8>; 382 }; 383 384 &sdio_pwrseq { 385 /* 386 * On the module itself this is one of these (depending 387 * on the actual card populated): 388 * - SDIO_RESET_L_WL_REG_ON 389 * - PDN (power down when low) 390 */ 391 reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>; 392 }; 393 394 &sdhci { 395 bus-width = <8>; 396 mmc-hs400-1_8v; 397 mmc-hs400-enhanced-strobe; 398 non-removable; 399 status = "okay"; 400 }; 401 402 &sdmmc { 403 cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; 404 max-frequency = <150000000>; 405 }; 406 407 &tcphy0 { 408 status = "okay"; 409 }; 410 411 &tsadc { 412 rockchip,hw-tshut-mode = <1>; 413 rockchip,hw-tshut-polarity = <1>; 414 status = "okay"; 415 }; 416 417 &u2phy0 { 418 status = "okay"; 419 420 u2phy0_otg: otg-port { 421 phy-supply = <&vbus_typec>; 422 status = "okay"; 423 }; 424 425 u2phy0_host: host-port { 426 phy-supply = <&vbus_host>; 427 status = "okay"; 428 }; 429 }; 430 431 432 &u2phy1 { 433 status = "okay"; 434 435 u2phy1_host: host-port { 436 phy-supply = <&vbus_host>; 437 status = "okay"; 438 }; 439 }; 440 441 &usb_host0_ehci { 442 status = "okay"; 443 }; 444 445 &usb_host0_ohci { 446 status = "okay"; 447 }; 448 449 &usb_host1_ehci { 450 status = "okay"; 451 }; 452 453 &usb_host1_ohci { 454 status = "okay"; 455 }; 456 457 &usbdrd3_0 { 458 status = "okay"; 459 }; 460 461 &usbdrd_dwc3_0 { 462 status = "okay"; 463 }; 464 465 &vbus_host { 466 enable-active-high; 467 gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */ 468 pinctrl-names = "default"; 469 pinctrl-0 = <&usb1_en_oc>; 470 }; 471 472 &vbus_typec { 473 enable-active-high; 474 gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */ 475 pinctrl-names = "default"; 476 pinctrl-0 = <&usb0_en_oc>; 477 };
Cache object: 394ef9ce1772c30c56d4138b7067cab6
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]