rk3566-quartz64-b.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
    1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
    2 
    3 /dts-v1/;
    4 
    5 #include <dt-bindings/gpio/gpio.h>
    6 #include <dt-bindings/pinctrl/rockchip.h>
    7 #include "rk3566.dtsi"
    8 
    9 / {
   10         model = "Pine64 RK3566 Quartz64-B Board";
   11         compatible = "pine64,quartz64-b", "rockchip,rk3566";
   12 
   13         aliases {
   14                 ethernet0 = &gmac1;
   15                 mmc0 = &sdmmc0;
   16                 mmc1 = &sdhci;
   17                 mmc2 = &sdmmc1;
   18         };
   19 
   20         chosen: chosen {
   21                 stdout-path = "serial2:1500000n8";
   22         };
   23 
   24         gmac1_clkin: external-gmac1-clock {
   25                 compatible = "fixed-clock";
   26                 clock-frequency = <125000000>;
   27                 clock-output-names = "gmac1_clkin";
   28                 #clock-cells = <0>;
   29         };
   30 
   31         leds {
   32                 compatible = "gpio-leds";
   33 
   34                 led-user {
   35                         label = "user-led";
   36                         default-state = "on";
   37                         gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
   38                         linux,default-trigger = "heartbeat";
   39                         pinctrl-names = "default";
   40                         pinctrl-0 = <&user_led_enable_h>;
   41                         retain-state-suspended;
   42                 };
   43         };
   44 
   45         sdio_pwrseq: sdio-pwrseq {
   46                 status = "okay";
   47                 compatible = "mmc-pwrseq-simple";
   48                 clocks = <&rk809 1>;
   49                 clock-names = "ext_clock";
   50                 pinctrl-names = "default";
   51                 pinctrl-0 = <&wifi_enable_h>;
   52                 reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
   53                 post-power-on-delay-ms = <100>;
   54                 power-off-delay-us = <5000000>;
   55         };
   56 
   57         vcc5v0_in: vcc5v0-in-regulator {
   58                 compatible = "regulator-fixed";
   59                 regulator-name = "vcc5v0_in";
   60                 regulator-always-on;
   61                 regulator-boot-on;
   62                 regulator-min-microvolt = <5000000>;
   63                 regulator-max-microvolt = <5000000>;
   64         };
   65 
   66         vcc5v0_sys: vcc5v0-sys-regulator {
   67                 compatible = "regulator-fixed";
   68                 regulator-name = "vcc5v0_sys";
   69                 regulator-always-on;
   70                 regulator-boot-on;
   71                 regulator-min-microvolt = <5000000>;
   72                 regulator-max-microvolt = <5000000>;
   73                 vin-supply = <&vcc5v0_in>;
   74         };
   75 
   76         vcc3v3_sys: vcc3v3-sys-regulator {
   77                 compatible = "regulator-fixed";
   78                 regulator-name = "vcc3v3_sys";
   79                 regulator-min-microvolt = <3300000>;
   80                 regulator-max-microvolt = <3300000>;
   81                 regulator-always-on;
   82                 vin-supply = <&vcc5v0_sys>;
   83         };
   84 
   85         vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
   86                 compatible = "regulator-fixed";
   87                 regulator-name = "vcc5v0_usb30_host";
   88                 enable-active-high;
   89                 gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
   90                 pinctrl-names = "default";
   91                 pinctrl-0 = <&vcc5v0_usb30_host_en_h>;
   92                 regulator-always-on;
   93                 regulator-min-microvolt = <5000000>;
   94                 regulator-max-microvolt = <5000000>;
   95                 vin-supply = <&vcc5v0_sys>;
   96         };
   97 
   98         vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
   99                 compatible = "regulator-fixed";
  100                 regulator-name = "vcc5v0_usb_otg";
  101                 enable-active-high;
  102                 gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
  103                 pinctrl-names = "default";
  104                 pinctrl-0 = <&vcc5v0_usb_otg_en_h>;
  105                 regulator-always-on;
  106                 regulator-min-microvolt = <5000000>;
  107                 regulator-max-microvolt = <5000000>;
  108                 vin-supply = <&vcc5v0_sys>;
  109         };
  110 };
  111 
  112 &combphy1 {
  113         status = "okay";
  114 };
  115 
  116 &cpu0 {
  117         cpu-supply = <&vdd_cpu>;
  118 };
  119 
  120 &cpu1 {
  121         cpu-supply = <&vdd_cpu>;
  122 };
  123 
  124 &cpu2 {
  125         cpu-supply = <&vdd_cpu>;
  126 };
  127 
  128 &cpu3 {
  129         cpu-supply = <&vdd_cpu>;
  130 };
  131 
  132 &gmac1 {
  133         assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
  134         assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
  135         clock_in_out = "input";
  136         phy-mode = "rgmii";
  137         phy-supply = <&vcc_3v3>;
  138         pinctrl-names = "default";
  139         pinctrl-0 = <&gmac1m1_miim
  140                      &gmac1m1_tx_bus2
  141                      &gmac1m1_rx_bus2
  142                      &gmac1m1_rgmii_clk
  143                      &gmac1m1_clkinout
  144                      &gmac1m1_rgmii_bus>;
  145         snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
  146         snps,reset-active-low;
  147         /* Reset time is 20ms, 100ms for rtl8211f, also works well here */
  148         snps,reset-delays-us = <0 20000 100000>;
  149         tx_delay = <0x4f>;
  150         rx_delay = <0x24>;
  151         phy-handle = <&rgmii_phy1>;
  152         status = "okay";
  153 };
  154 
  155 &i2c0 {
  156         status = "okay";
  157 
  158         vdd_cpu: regulator@1c {
  159                 compatible = "tcs,tcs4525";
  160                 reg = <0x1c>;
  161                 fcs,suspend-voltage-selector = <1>;
  162                 regulator-name = "vdd_cpu";
  163                 regulator-min-microvolt = <800000>;
  164                 regulator-max-microvolt = <1150000>;
  165                 regulator-ramp-delay = <2300>;
  166                 regulator-always-on;
  167                 regulator-boot-on;
  168                 vin-supply = <&vcc5v0_sys>;
  169 
  170                 regulator-state-mem {
  171                         regulator-off-in-suspend;
  172                 };
  173         };
  174 
  175         rk809: pmic@20 {
  176                 compatible = "rockchip,rk809";
  177                 reg = <0x20>;
  178                 interrupt-parent = <&gpio0>;
  179                 interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
  180                 clock-output-names = "rk808-clkout1", "rk808-clkout2";
  181 
  182                 pinctrl-names = "default";
  183                 pinctrl-0 = <&pmic_int>;
  184                 rockchip,system-power-controller;
  185                 wakeup-source;
  186                 #clock-cells = <1>;
  187 
  188                 vcc1-supply = <&vcc3v3_sys>;
  189                 vcc2-supply = <&vcc3v3_sys>;
  190                 vcc3-supply = <&vcc3v3_sys>;
  191                 vcc4-supply = <&vcc3v3_sys>;
  192                 vcc5-supply = <&vcc3v3_sys>;
  193                 vcc6-supply = <&vcc3v3_sys>;
  194                 vcc7-supply = <&vcc3v3_sys>;
  195                 vcc8-supply = <&vcc3v3_sys>;
  196                 vcc9-supply = <&vcc3v3_sys>;
  197 
  198                 regulators {
  199                         vdd_log: DCDC_REG1 {
  200                                 regulator-name = "vdd_log";
  201                                 regulator-always-on;
  202                                 regulator-boot-on;
  203                                 regulator-min-microvolt = <500000>;
  204                                 regulator-max-microvolt = <1350000>;
  205                                 regulator-init-microvolt = <900000>;
  206                                 regulator-ramp-delay = <6001>;
  207 
  208                                 regulator-state-mem {
  209                                         regulator-on-in-suspend;
  210                                         regulator-suspend-microvolt = <900000>;
  211                                 };
  212                         };
  213 
  214                         vdd_gpu: DCDC_REG2 {
  215                                 regulator-name = "vdd_gpu";
  216                                 regulator-always-on;
  217                                 regulator-boot-on;
  218                                 regulator-min-microvolt = <900000>;
  219                                 regulator-max-microvolt = <1350000>;
  220                                 regulator-init-microvolt = <900000>;
  221                                 regulator-ramp-delay = <6001>;
  222 
  223                                 regulator-state-mem {
  224                                         regulator-off-in-suspend;
  225                                         regulator-suspend-microvolt = <900000>;
  226                                 };
  227                         };
  228 
  229                         vcc_ddr: DCDC_REG3 {
  230                                 regulator-name = "vcc_ddr";
  231                                 regulator-always-on;
  232                                 regulator-boot-on;
  233                                 regulator-initial-mode = <0x2>;
  234                                 regulator-state-mem {
  235                                         regulator-on-in-suspend;
  236                                 };
  237                         };
  238 
  239                         vdd_npu: DCDC_REG4 {
  240                                 regulator-name = "vdd_npu";
  241                                 regulator-min-microvolt = <900000>;
  242                                 regulator-max-microvolt = <1350000>;
  243                                 regulator-initial-mode = <0x2>;
  244                                 regulator-state-mem {
  245                                         regulator-off-in-suspend;
  246                                 };
  247                         };
  248 
  249                         vcc_1v8: DCDC_REG5 {
  250                                 regulator-name = "vcc_1v8";
  251                                 regulator-always-on;
  252                                 regulator-boot-on;
  253                                 regulator-min-microvolt = <1800000>;
  254                                 regulator-max-microvolt = <1800000>;
  255 
  256                                 regulator-state-mem {
  257                                         regulator-on-in-suspend;
  258                                         regulator-suspend-microvolt = <1800000>;
  259                                 };
  260                         };
  261 
  262                         vdda0v9_image: LDO_REG1 {
  263                                 regulator-name = "vdda0v9_image";
  264                                 regulator-always-on;
  265                                 regulator-boot-on;
  266                                 regulator-min-microvolt = <900000>;
  267                                 regulator-max-microvolt = <900000>;
  268 
  269                                 regulator-state-mem {
  270                                         regulator-on-in-suspend;
  271                                         regulator-suspend-microvolt = <900000>;
  272                                 };
  273                         };
  274 
  275                         vdda_0v9: LDO_REG2 {
  276                                 regulator-name = "vdda_0v9";
  277                                 regulator-always-on;
  278                                 regulator-boot-on;
  279                                 regulator-min-microvolt = <900000>;
  280                                 regulator-max-microvolt = <900000>;
  281 
  282                                 regulator-state-mem {
  283                                         regulator-on-in-suspend;
  284                                         regulator-suspend-microvolt = <900000>;
  285                                 };
  286                         };
  287 
  288                         vdda0v9_pmu: LDO_REG3 {
  289                                 regulator-name = "vdda0v9_pmu";
  290                                 regulator-always-on;
  291                                 regulator-boot-on;
  292                                 regulator-min-microvolt = <900000>;
  293                                 regulator-max-microvolt = <900000>;
  294                                 regulator-state-mem {
  295                                         regulator-on-in-suspend;
  296                                         regulator-suspend-microvolt = <900000>;
  297                                 };
  298                         };
  299 
  300                         vccio_acodec: LDO_REG4 {
  301                                 regulator-name = "vccio_acodec";
  302                                 regulator-always-on;
  303                                 regulator-boot-on;
  304                                 regulator-min-microvolt = <3300000>;
  305                                 regulator-max-microvolt = <3300000>;
  306 
  307                                 regulator-state-mem {
  308                                         regulator-on-in-suspend;
  309                                         regulator-suspend-microvolt = <3300000>;
  310 
  311                                 };
  312                         };
  313 
  314                         vccio_sd: LDO_REG5 {
  315                                 regulator-name = "vccio_sd";
  316                                 regulator-always-on;
  317                                 regulator-boot-on;
  318                                 regulator-min-microvolt = <1800000>;
  319                                 regulator-max-microvolt = <3300000>;
  320 
  321                                 regulator-state-mem {
  322                                         regulator-on-in-suspend;
  323                                         regulator-suspend-microvolt = <3300000>;
  324                                 };
  325                         };
  326 
  327                         vcc3v3_pmu: LDO_REG6 {
  328                                 regulator-name = "vcc3v3_pmu";
  329                                 regulator-always-on;
  330                                 regulator-boot-on;
  331                                 regulator-min-microvolt = <3300000>;
  332                                 regulator-max-microvolt = <3300000>;
  333 
  334                                 regulator-state-mem {
  335                                         regulator-on-in-suspend;
  336                                         regulator-suspend-microvolt = <3300000>;
  337                                 };
  338                         };
  339 
  340                         vcca_1v8: LDO_REG7 {
  341                                 regulator-name = "vcca_1v8";
  342                                 regulator-always-on;
  343                                 regulator-boot-on;
  344                                 regulator-min-microvolt = <1800000>;
  345                                 regulator-max-microvolt = <1800000>;
  346 
  347                                 regulator-state-mem {
  348                                         regulator-on-in-suspend;
  349                                         regulator-suspend-microvolt = <1800000>;
  350                                 };
  351                         };
  352 
  353                         vcca1v8_pmu: LDO_REG8 {
  354                                 regulator-name = "vcca1v8_pmu";
  355                                 regulator-always-on;
  356                                 regulator-boot-on;
  357                                 regulator-min-microvolt = <1800000>;
  358                                 regulator-max-microvolt = <1800000>;
  359 
  360                                 regulator-state-mem {
  361                                         regulator-on-in-suspend;
  362                                         regulator-suspend-microvolt = <1800000>;
  363                                 };
  364                         };
  365 
  366                         vcca1v8_image: LDO_REG9 {
  367                                 regulator-name = "vcca1v8_image";
  368                                 regulator-always-on;
  369                                 regulator-boot-on;
  370                                 regulator-min-microvolt = <1800000>;
  371                                 regulator-max-microvolt = <1800000>;
  372 
  373                                 regulator-state-mem {
  374                                         regulator-on-in-suspend;
  375                                         regulator-suspend-microvolt = <1800000>;
  376                                 };
  377                         };
  378 
  379                         vcc_3v3: SWITCH_REG1 {
  380                                 regulator-boot-on;
  381                                 regulator-name = "vcc_3v3";
  382                         };
  383 
  384                         vcc3v3_sd: SWITCH_REG2 {
  385                                 regulator-name = "vcc3v3_sd";
  386                         };
  387                 };
  388         };
  389 };
  390 
  391 /* i2c2_m1 exposed on csi port, pulled up to vcc_3v3 */
  392 &i2c2 {
  393         pinctrl-names = "default";
  394         pinctrl-0 = <&i2c2m1_xfer>;
  395         status = "okay";
  396 };
  397 
  398 /* i2c3_m1 exposed on dsi port, pulled up to vcc_3v3 */
  399 &i2c3 {
  400         pinctrl-names = "default";
  401         pinctrl-0 = <&i2c3m1_xfer>;
  402         status = "okay";
  403 };
  404 
  405 /*
  406  * i2c4_m0 is exposed on PI40, pulled up to vcc_3v3
  407  * pin 27 - i2c4_sda_m0
  408  * pin 28 - i2c4_scl_m0
  409  */
  410 &i2c4 {
  411         status = "okay";
  412 };
  413 
  414 /*
  415  * i2c5_m0 is exposed on PI40
  416  * pin 29 - i2c5_scl_m0
  417  * pin 31 - i2c5_sda_m0
  418  */
  419 &i2c5 {
  420         status = "disabled";
  421 };
  422 
  423 &mdio1 {
  424         rgmii_phy1: ethernet-phy@1 {
  425                 compatible = "ethernet-phy-ieee802.3-c22";
  426                 reg = <0x1>;
  427         };
  428 };
  429 
  430 &pinctrl {
  431         bt {
  432                 bt_enable_h: bt-enable-h {
  433                         rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
  434                 };
  435 
  436                 bt_host_wake_l: bt-host-wake-l {
  437                         rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>;
  438                 };
  439 
  440                 bt_wake_l: bt-wake-l {
  441                         rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
  442                 };
  443         };
  444 
  445         leds {
  446                 user_led_enable_h: user-led-enable-h {
  447                         rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
  448                 };
  449         };
  450 
  451         pmic {
  452                 pmic_int: pmic_int {
  453                         rockchip,pins =
  454                                 <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
  455                 };
  456         };
  457 
  458         sdio-pwrseq {
  459                 wifi_enable_h: wifi-enable-h {
  460                         rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
  461                 };
  462         };
  463 
  464         usb {
  465                 vcc5v0_usb30_host_en_h: vcc5v0-usb30-host-en_h {
  466                         rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
  467                 };
  468 
  469                 vcc5v0_usb_otg_en_h: vcc5v0-usb-otg-en_h {
  470                         rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
  471                 };
  472         };
  473 };
  474 
  475 &pmu_io_domains {
  476         status = "okay";
  477         pmuio1-supply = <&vcc3v3_pmu>;
  478         pmuio2-supply = <&vcca1v8_pmu>;
  479         vccio1-supply = <&vccio_acodec>;
  480         vccio2-supply = <&vcc_1v8>;
  481         vccio3-supply = <&vccio_sd>;
  482         vccio4-supply = <&vcca1v8_pmu>;
  483         vccio5-supply = <&vcc_3v3>;
  484         vccio6-supply = <&vcc_3v3>;
  485         vccio7-supply = <&vcc_3v3>;
  486 };
  487 
  488 &saradc {
  489         vref-supply = <&vcca_1v8>;
  490         status = "okay";
  491 };
  492 
  493 &sdhci {
  494         bus-width = <8>;
  495         mmc-hs200-1_8v;
  496         non-removable;
  497         vmmc-supply = <&vcc_3v3>;
  498         vqmmc-supply = <&vcc_1v8>;
  499         status = "okay";
  500 };
  501 
  502 &sdmmc0 {
  503         bus-width = <4>;
  504         cap-sd-highspeed;
  505         cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
  506         disable-wp;
  507         pinctrl-names = "default";
  508         pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
  509         sd-uhs-sdr50;
  510         vmmc-supply = <&vcc3v3_sd>;
  511         vqmmc-supply = <&vccio_sd>;
  512         status = "okay";
  513 };
  514 
  515 &sdmmc1 {
  516         bus-width = <4>;
  517         cap-sd-highspeed;
  518         cap-sdio-irq;
  519         keep-power-in-suspend;
  520         mmc-pwrseq = <&sdio_pwrseq>;
  521         non-removable;
  522         pinctrl-names = "default";
  523         pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
  524         vmmc-supply = <&vcc3v3_sys>;
  525         vqmmc-supply = <&vcca1v8_pmu>;
  526         status = "okay";
  527 };
  528 
  529 &sfc {
  530         pinctrl-0 = <&fspi_pins>;
  531         pinctrl-names = "default";
  532         #address-cells = <1>;
  533         #size-cells = <0>;
  534         status = "okay";
  535 
  536         flash@0 {
  537                 compatible = "jedec,spi-nor";
  538                 reg = <0>;
  539                 spi-max-frequency = <24000000>;
  540                 spi-rx-bus-width = <4>;
  541                 spi-tx-bus-width = <1>;
  542         };
  543 };
  544 
  545 &tsadc {
  546         status = "okay";
  547 };
  548 
  549 &uart1 {
  550         pinctrl-names = "default";
  551         pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
  552         status = "okay";
  553         uart-has-rtscts;
  554 
  555         bluetooth {
  556                 compatible = "brcm,bcm4345c5";
  557                 clocks = <&rk809 1>;
  558                 clock-names = "lpo";
  559                 device-wakeup-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
  560                 host-wakeup-gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
  561                 shutdown-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
  562                 pinctrl-names = "default";
  563                 pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
  564                 vbat-supply = <&vcc3v3_sys>;
  565                 vddio-supply = <&vcca1v8_pmu>;
  566         };
  567 };
  568 
  569 /*
  570  * uart2_m0 is exposed on PI40
  571  * pin 8  - uart2_tx_m0
  572  * pin 10 - uart2_rx_m0
  573  */
  574 &uart2 {
  575         status = "okay";
  576 };
  577 
  578 &usb2phy0_host {
  579         phy-supply = <&vcc5v0_usb30_host>;
  580         status = "okay";
  581 };
  582 
  583 &usb2phy0_otg {
  584         phy-supply = <&vcc5v0_usb_otg>;
  585         status = "okay";
  586 };
  587 
  588 &usb2phy1_otg {
  589         phy-supply = <&vcc5v0_usb30_host>;
  590         status = "okay";
  591 };
  592 
  593 &usb2phy0 {
  594         status = "okay";
  595 };
  596 
  597 &usb2phy1 {
  598         status = "okay";
  599 };
  600 
  601 &usb_host0_xhci {
  602         status = "okay";
  603 };
  604 
  605 &usb_host1_xhci {
  606         status = "okay";
  607 };
  608 
  609 &usb_host0_ehci {
  610         status = "okay";
  611 };
  612 
  613 &usb_host0_ohci {
  614         status = "okay";
  615 };
Cache object: 1353f7a9e3bdc87e7ff919601da1dd2a
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.
FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm64/rockchip/rk3566-quartz64-b.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm64/rockchip/rk3566-quartz64-b.dts
