Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/mips/brcm/bcm7362.dtsi
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 // SPDX-License-Identifier: GPL-2.0 2 / { 3 #address-cells = <1>; 4 #size-cells = <1>; 5 compatible = "brcm,bcm7362"; 6 7 cpus { 8 #address-cells = <1>; 9 #size-cells = <0>; 10 11 mips-hpt-frequency = <375000000>; 12 13 cpu@0 { 14 compatible = "brcm,bmips4380"; 15 device_type = "cpu"; 16 reg = <0>; 17 }; 18 19 cpu@1 { 20 compatible = "brcm,bmips4380"; 21 device_type = "cpu"; 22 reg = <1>; 23 }; 24 }; 25 26 aliases { 27 uart0 = &uart0; 28 }; 29 30 cpu_intc: interrupt-controller { 31 #address-cells = <0>; 32 compatible = "mti,cpu-interrupt-controller"; 33 34 interrupt-controller; 35 #interrupt-cells = <1>; 36 }; 37 38 clocks { 39 uart_clk: uart_clk { 40 compatible = "fixed-clock"; 41 #clock-cells = <0>; 42 clock-frequency = <81000000>; 43 }; 44 45 upg_clk: upg_clk { 46 compatible = "fixed-clock"; 47 #clock-cells = <0>; 48 clock-frequency = <27000000>; 49 }; 50 }; 51 52 rdb { 53 #address-cells = <1>; 54 #size-cells = <1>; 55 56 compatible = "simple-bus"; 57 ranges = <0 0x10000000 0x01000000>; 58 59 periph_intc: interrupt-controller@411400 { 60 compatible = "brcm,bcm7038-l1-intc"; 61 reg = <0x411400 0x30>, <0x411600 0x30>; 62 63 interrupt-controller; 64 #interrupt-cells = <1>; 65 66 interrupt-parent = <&cpu_intc>; 67 interrupts = <2>, <3>; 68 }; 69 70 sun_l2_intc: interrupt-controller@403000 { 71 compatible = "brcm,l2-intc"; 72 reg = <0x403000 0x30>; 73 interrupt-controller; 74 #interrupt-cells = <1>; 75 interrupt-parent = <&periph_intc>; 76 interrupts = <48>; 77 }; 78 79 gisb-arb@400000 { 80 compatible = "brcm,bcm7400-gisb-arb"; 81 reg = <0x400000 0xdc>; 82 native-endian; 83 interrupt-parent = <&sun_l2_intc>; 84 interrupts = <0>, <2>; 85 brcm,gisb-arb-master-mask = <0x2f3>; 86 brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0", 87 "rdc_0", "raaga_0", 88 "avd_0", "jtag_0"; 89 }; 90 91 upg_irq0_intc: interrupt-controller@406600 { 92 compatible = "brcm,bcm7120-l2-intc"; 93 reg = <0x406600 0x8>; 94 95 brcm,int-map-mask = <0x44>, <0x7000000>; 96 brcm,int-fwd-mask = <0x70000>; 97 98 interrupt-controller; 99 #interrupt-cells = <1>; 100 101 interrupt-parent = <&periph_intc>; 102 interrupts = <56>, <54>; 103 interrupt-names = "upg_main", "upg_bsc"; 104 }; 105 106 upg_aon_irq0_intc: interrupt-controller@408b80 { 107 compatible = "brcm,bcm7120-l2-intc"; 108 reg = <0x408b80 0x8>; 109 110 brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>; 111 brcm,int-fwd-mask = <0>; 112 brcm,irq-can-wake; 113 114 interrupt-controller; 115 #interrupt-cells = <1>; 116 117 interrupt-parent = <&periph_intc>; 118 interrupts = <57>, <55>, <59>; 119 interrupt-names = "upg_main_aon", "upg_bsc_aon", 120 "upg_spi"; 121 }; 122 123 sun_top_ctrl: syscon@404000 { 124 compatible = "brcm,bcm7362-sun-top-ctrl", "syscon"; 125 reg = <0x404000 0x51c>; 126 native-endian; 127 }; 128 129 reboot { 130 compatible = "brcm,brcmstb-reboot"; 131 syscon = <&sun_top_ctrl 0x304 0x308>; 132 }; 133 134 uart0: serial@406800 { 135 compatible = "ns16550a"; 136 reg = <0x406800 0x20>; 137 reg-io-width = <0x4>; 138 reg-shift = <0x2>; 139 native-endian; 140 interrupt-parent = <&periph_intc>; 141 interrupts = <61>; 142 clocks = <&uart_clk>; 143 status = "disabled"; 144 }; 145 146 uart1: serial@406840 { 147 compatible = "ns16550a"; 148 reg = <0x406840 0x20>; 149 reg-io-width = <0x4>; 150 reg-shift = <0x2>; 151 native-endian; 152 interrupt-parent = <&periph_intc>; 153 interrupts = <62>; 154 clocks = <&uart_clk>; 155 status = "disabled"; 156 }; 157 158 uart2: serial@406880 { 159 compatible = "ns16550a"; 160 reg = <0x406880 0x20>; 161 reg-io-width = <0x4>; 162 reg-shift = <0x2>; 163 native-endian; 164 interrupt-parent = <&periph_intc>; 165 interrupts = <63>; 166 clocks = <&uart_clk>; 167 status = "disabled"; 168 }; 169 170 bsca: i2c@406200 { 171 clock-frequency = <390000>; 172 compatible = "brcm,brcmstb-i2c"; 173 interrupt-parent = <&upg_irq0_intc>; 174 reg = <0x406200 0x58>; 175 interrupts = <24>; 176 interrupt-names = "upg_bsca"; 177 status = "disabled"; 178 }; 179 180 bscb: i2c@406280 { 181 clock-frequency = <390000>; 182 compatible = "brcm,brcmstb-i2c"; 183 interrupt-parent = <&upg_irq0_intc>; 184 reg = <0x406280 0x58>; 185 interrupts = <25>; 186 interrupt-names = "upg_bscb"; 187 status = "disabled"; 188 }; 189 190 bscd: i2c@408980 { 191 clock-frequency = <390000>; 192 compatible = "brcm,brcmstb-i2c"; 193 interrupt-parent = <&upg_aon_irq0_intc>; 194 reg = <0x408980 0x58>; 195 interrupts = <27>; 196 interrupt-names = "upg_bscd"; 197 status = "disabled"; 198 }; 199 200 pwma: pwm@406400 { 201 compatible = "brcm,bcm7038-pwm"; 202 reg = <0x406400 0x28>; 203 #pwm-cells = <2>; 204 clocks = <&upg_clk>; 205 status = "disabled"; 206 }; 207 208 watchdog: watchdog@4066a8 { 209 clocks = <&upg_clk>; 210 compatible = "brcm,bcm7038-wdt"; 211 reg = <0x4066a8 0x14>; 212 status = "disabled"; 213 }; 214 215 aon_pm_l2_intc: interrupt-controller@408440 { 216 compatible = "brcm,l2-intc"; 217 reg = <0x408440 0x30>; 218 interrupt-controller; 219 #interrupt-cells = <1>; 220 interrupt-parent = <&periph_intc>; 221 interrupts = <50>; 222 brcm,irq-can-wake; 223 }; 224 225 aon_ctrl: syscon@408000 { 226 compatible = "brcm,brcmstb-aon-ctrl"; 227 reg = <0x408000 0x100>, <0x408200 0x200>; 228 reg-names = "aon-ctrl", "aon-sram"; 229 }; 230 231 timers: timer@406680 { 232 compatible = "brcm,brcmstb-timers"; 233 reg = <0x406680 0x40>; 234 }; 235 236 upg_gio: gpio@406500 { 237 compatible = "brcm,brcmstb-gpio"; 238 reg = <0x406500 0xa0>; 239 #gpio-cells = <2>; 240 #interrupt-cells = <2>; 241 gpio-controller; 242 interrupt-controller; 243 interrupt-parent = <&upg_irq0_intc>; 244 interrupts = <6>; 245 brcm,gpio-bank-widths = <32 32 32 29 4>; 246 }; 247 248 upg_gio_aon: gpio@408c00 { 249 compatible = "brcm,brcmstb-gpio"; 250 reg = <0x408c00 0x60>; 251 #gpio-cells = <2>; 252 #interrupt-cells = <2>; 253 gpio-controller; 254 interrupt-controller; 255 interrupt-parent = <&upg_aon_irq0_intc>; 256 interrupts = <6>; 257 interrupts-extended = <&upg_aon_irq0_intc 6>, 258 <&aon_pm_l2_intc 5>; 259 wakeup-source; 260 brcm,gpio-bank-widths = <21 32 2>; 261 }; 262 263 enet0: ethernet@430000 { 264 phy-mode = "internal"; 265 phy-handle = <&phy1>; 266 mac-address = [ 00 10 18 36 23 1a ]; 267 compatible = "brcm,genet-v2"; 268 #address-cells = <0x1>; 269 #size-cells = <0x1>; 270 reg = <0x430000 0x4c8c>; 271 interrupts = <24>, <25>; 272 interrupt-parent = <&periph_intc>; 273 status = "disabled"; 274 275 mdio@e14 { 276 compatible = "brcm,genet-mdio-v2"; 277 #address-cells = <0x1>; 278 #size-cells = <0x0>; 279 reg = <0xe14 0x8>; 280 281 phy1: ethernet-phy@1 { 282 max-speed = <100>; 283 reg = <0x1>; 284 compatible = "brcm,40nm-ephy", 285 "ethernet-phy-ieee802.3-c22"; 286 }; 287 }; 288 }; 289 290 ehci0: usb@480300 { 291 compatible = "brcm,bcm7362-ehci", "generic-ehci"; 292 reg = <0x480300 0x100>; 293 native-endian; 294 interrupt-parent = <&periph_intc>; 295 interrupts = <65>; 296 status = "disabled"; 297 }; 298 299 ohci0: usb@480400 { 300 compatible = "brcm,bcm7362-ohci", "generic-ohci"; 301 reg = <0x480400 0x100>; 302 native-endian; 303 no-big-frame-no; 304 interrupt-parent = <&periph_intc>; 305 interrupts = <66>; 306 status = "disabled"; 307 }; 308 309 hif_l2_intc: interrupt-controller@411000 { 310 compatible = "brcm,l2-intc"; 311 reg = <0x411000 0x30>; 312 interrupt-controller; 313 #interrupt-cells = <1>; 314 interrupt-parent = <&periph_intc>; 315 interrupts = <30>; 316 }; 317 318 nand: nand@412800 { 319 compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand"; 320 #address-cells = <1>; 321 #size-cells = <0>; 322 reg-names = "nand"; 323 reg = <0x412800 0x400>; 324 interrupt-parent = <&hif_l2_intc>; 325 interrupts = <24>; 326 status = "disabled"; 327 }; 328 329 sata: sata@181000 { 330 compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci"; 331 reg-names = "ahci", "top-ctrl"; 332 reg = <0x181000 0xa9c>, <0x180020 0x1c>; 333 interrupt-parent = <&periph_intc>; 334 interrupts = <86>; 335 #address-cells = <1>; 336 #size-cells = <0>; 337 status = "disabled"; 338 339 sata0: sata-port@0 { 340 reg = <0>; 341 phys = <&sata_phy0>; 342 }; 343 344 sata1: sata-port@1 { 345 reg = <1>; 346 phys = <&sata_phy1>; 347 }; 348 }; 349 350 sata_phy: sata-phy@180100 { 351 compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3"; 352 reg = <0x180100 0x0eff>; 353 reg-names = "phy"; 354 #address-cells = <1>; 355 #size-cells = <0>; 356 status = "disabled"; 357 358 sata_phy0: sata-phy@0 { 359 reg = <0>; 360 #phy-cells = <0>; 361 }; 362 363 sata_phy1: sata-phy@1 { 364 reg = <1>; 365 #phy-cells = <0>; 366 }; 367 }; 368 369 sdhci0: sdhci@410000 { 370 compatible = "brcm,bcm7425-sdhci"; 371 reg = <0x410000 0x100>; 372 interrupt-parent = <&periph_intc>; 373 interrupts = <82>; 374 status = "disabled"; 375 }; 376 377 spi_l2_intc: interrupt-controller@411d00 { 378 compatible = "brcm,l2-intc"; 379 reg = <0x411d00 0x30>; 380 interrupt-controller; 381 #interrupt-cells = <1>; 382 interrupt-parent = <&periph_intc>; 383 interrupts = <31>; 384 }; 385 386 qspi: spi@413000 { 387 #address-cells = <0x1>; 388 #size-cells = <0x0>; 389 compatible = "brcm,spi-bcm-qspi", 390 "brcm,spi-brcmstb-qspi"; 391 clocks = <&upg_clk>; 392 reg = <0x410920 0x4 0x413200 0x188 0x413000 0x50>; 393 reg-names = "cs_reg", "hif_mspi", "bspi"; 394 interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>; 395 interrupt-parent = <&spi_l2_intc>; 396 interrupt-names = "spi_lr_fullness_reached", 397 "spi_lr_session_aborted", 398 "spi_lr_impatient", 399 "spi_lr_session_done", 400 "spi_lr_overread", 401 "mspi_done", 402 "mspi_halted"; 403 status = "disabled"; 404 }; 405 406 mspi: spi@408a00 { 407 #address-cells = <1>; 408 #size-cells = <0>; 409 compatible = "brcm,spi-bcm-qspi", 410 "brcm,spi-brcmstb-mspi"; 411 clocks = <&upg_clk>; 412 reg = <0x408a00 0x180>; 413 reg-names = "mspi"; 414 interrupts = <0x14>; 415 interrupt-parent = <&upg_aon_irq0_intc>; 416 interrupt-names = "mspi_done"; 417 status = "disabled"; 418 }; 419 420 waketimer: waketimer@408e80 { 421 compatible = "brcm,brcmstb-waketimer"; 422 reg = <0x408e80 0x14>; 423 interrupts = <0x3>; 424 interrupt-parent = <&aon_pm_l2_intc>; 425 interrupt-names = "timer"; 426 clocks = <&upg_clk>; 427 status = "disabled"; 428 }; 429 }; 430 431 memory_controllers { 432 compatible = "simple-bus"; 433 ranges = <0x0 0x103b0000 0xa000>; 434 #address-cells = <1>; 435 #size-cells = <1>; 436 437 memory-controller@0 { 438 compatible = "brcm,brcmstb-memc", "simple-bus"; 439 ranges = <0x0 0x0 0xa000>; 440 #address-cells = <1>; 441 #size-cells = <1>; 442 443 memc-arb@1000 { 444 compatible = "brcm,brcmstb-memc-arb"; 445 reg = <0x1000 0x248>; 446 }; 447 448 memc-ddr@2000 { 449 compatible = "brcm,brcmstb-memc-ddr"; 450 reg = <0x2000 0x300>; 451 }; 452 453 ddr-phy@6000 { 454 compatible = "brcm,brcmstb-ddr-phy"; 455 reg = <0x6000 0xc8>; 456 }; 457 458 shimphy@8000 { 459 compatible = "brcm,brcmstb-ddr-shimphy"; 460 reg = <0x8000 0x13c>; 461 }; 462 }; 463 }; 464 };
Cache object: 0217377098a3f7c7ea0085937007e567
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]