The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/powerpc/fsl/p1022ds.dtsi

Version: -  FREEBSD  -  FREEBSD-13-STABLE  -  FREEBSD-13-0  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  l41  -  OPENBSD  -  linux-2.6  -  MK84  -  PLAN9  -  xnu-8792 
SearchContext: -  none  -  3  -  10 

    1 /*
    2  * P1022 DS Device Tree Source stub (no addresses or top-level ranges)
    3  *
    4  * Copyright 2012 Freescale Semiconductor Inc.
    5  *
    6  * Redistribution and use in source and binary forms, with or without
    7  * modification, are permitted provided that the following conditions are met:
    8  *     * Redistributions of source code must retain the above copyright
    9  *       notice, this list of conditions and the following disclaimer.
   10  *     * Redistributions in binary form must reproduce the above copyright
   11  *       notice, this list of conditions and the following disclaimer in the
   12  *       documentation and/or other materials provided with the distribution.
   13  *     * Neither the name of Freescale Semiconductor nor the
   14  *       names of its contributors may be used to endorse or promote products
   15  *       derived from this software without specific prior written permission.
   16  *
   17  *
   18  * ALTERNATIVELY, this software may be distributed under the terms of the
   19  * GNU General Public License ("GPL") as published by the Free Software
   20  * Foundation, either version 2 of that License or (at your option) any
   21  * later version.
   22  *
   23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
   24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
   25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
   26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
   27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
   28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
   29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
   30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
   31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
   32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   33  */
   34 
   35 &board_lbc {
   36         nor@0,0 {
   37                 #address-cells = <1>;
   38                 #size-cells = <1>;
   39                 compatible = "cfi-flash";
   40                 reg = <0x0 0x0 0x8000000>;
   41                 bank-width = <2>;
   42                 device-width = <1>;
   43 
   44                 partition@0 {
   45                         reg = <0x0 0x03000000>;
   46                         label = "ramdisk-nor";
   47                         read-only;
   48                 };
   49 
   50                 partition@3000000 {
   51                         reg = <0x03000000 0x00e00000>;
   52                         label = "diagnostic-nor";
   53                         read-only;
   54                 };
   55 
   56                 partition@3e00000 {
   57                         reg = <0x03e00000 0x00200000>;
   58                         label = "dink-nor";
   59                         read-only;
   60                 };
   61 
   62                 partition@4000000 {
   63                         reg = <0x04000000 0x00400000>;
   64                         label = "kernel-nor";
   65                         read-only;
   66                 };
   67 
   68                 partition@4400000 {
   69                         reg = <0x04400000 0x03b00000>;
   70                         label = "jffs2-nor";
   71                 };
   72 
   73                 partition@7f00000 {
   74                         reg = <0x07f00000 0x00080000>;
   75                         label = "dtb-nor";
   76                         read-only;
   77                 };
   78 
   79                 partition@7f80000 {
   80                         reg = <0x07f80000 0x00080000>;
   81                         label = "u-boot-nor";
   82                         read-only;
   83                 };
   84         };
   85 
   86         nand@2,0 {
   87                 #address-cells = <1>;
   88                 #size-cells = <1>;
   89                 compatible = "fsl,elbc-fcm-nand";
   90                 reg = <0x2 0x0 0x40000>;
   91 
   92                 partition@0 {
   93                         reg = <0x0 0x02000000>;
   94                         label = "u-boot-nand";
   95                         read-only;
   96                 };
   97 
   98                 partition@2000000 {
   99                         reg = <0x02000000 0x10000000>;
  100                         label = "jffs2-nand";
  101                 };
  102 
  103                 partition@12000000 {
  104                         reg = <0x12000000 0x10000000>;
  105                         label = "ramdisk-nand";
  106                         read-only;
  107                 };
  108 
  109                 partition@22000000 {
  110                         reg = <0x22000000 0x04000000>;
  111                         label = "kernel-nand";
  112                 };
  113 
  114                 partition@26000000 {
  115                         reg = <0x26000000 0x01000000>;
  116                         label = "dtb-nand";
  117                         read-only;
  118                 };
  119 
  120                 partition@27000000 {
  121                         reg = <0x27000000 0x19000000>;
  122                         label = "reserved-nand";
  123                 };
  124         };
  125 
  126         board-control@3,0 {
  127                 compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
  128                 reg = <3 0 0x30>;
  129                 interrupt-parent = <&mpic>;
  130                 /*
  131                  * IRQ8 is generated if the "EVENT" switch is pressed
  132                  * and PX_CTL[EVESEL] is set to 00.
  133                  */
  134                 interrupts = <8 0 0 0>;
  135         };
  136 };
  137 
  138 &board_soc {
  139         i2c@3100 {
  140                 wm8776:codec@1a {
  141                         compatible = "wlf,wm8776";
  142                         reg = <0x1a>;
  143                         /*
  144                          * clock-frequency will be set by U-Boot if
  145                          * the clock is enabled.
  146                          */
  147                 };
  148                 rtc@68 {
  149                         compatible = "dallas,ds3232";
  150                         reg = <0x68>;
  151                         interrupts = <0x1 0x1 0 0>;
  152                 };
  153                 adt7461@4c {
  154                         compatible = "adi,adt7461";
  155                         reg = <0x4c>;
  156                 };
  157         };
  158 
  159         spi@7000 {
  160                 flash@0 {
  161                         #address-cells = <1>;
  162                         #size-cells = <1>;
  163                         compatible = "spansion,s25sl12801", "jedec,spi-nor";
  164                         reg = <0>;
  165                         spi-max-frequency = <40000000>; /* input clock */
  166 
  167                         partition@0 {
  168                                 label = "u-boot-spi";
  169                                 reg = <0x00000000 0x00100000>;
  170                                 read-only;
  171                         };
  172                         partition@100000 {
  173                                 label = "kernel-spi";
  174                                 reg = <0x00100000 0x00500000>;
  175                                 read-only;
  176                         };
  177                         partition@600000 {
  178                                 label = "dtb-spi";
  179                                 reg = <0x00600000 0x00100000>;
  180                                 read-only;
  181                         };
  182                         partition@700000 {
  183                                 label = "file system-spi";
  184                                 reg = <0x00700000 0x00900000>;
  185                         };
  186                 };
  187         };
  188 
  189         ssi@15000 {
  190                 fsl,mode = "i2s-slave";
  191                 codec-handle = <&wm8776>;
  192                 fsl,ssi-asynchronous;
  193         };
  194 
  195         usb@22000 {
  196                 phy_type = "ulpi";
  197         };
  198 
  199         usb@23000 {
  200                 status = "disabled";
  201         };
  202 
  203         mdio@24000 {
  204                 phy0: ethernet-phy@0 {
  205                         interrupts = <3 1 0 0>;
  206                         reg = <0x1>;
  207                 };
  208                 phy1: ethernet-phy@1 {
  209                         interrupts = <9 1 0 0>;
  210                         reg = <0x2>;
  211                 };
  212                 tbi-phy@2 {
  213                         device_type = "tbi-phy";
  214                         reg = <0x2>;
  215                 };
  216         };
  217 
  218         ptp_clock@b0e00 {
  219                 compatible = "fsl,etsec-ptp";
  220                 reg = <0xb0e00 0xb0>;
  221                 interrupts = <68 2 0 0 69 2 0 0>;
  222                 fsl,tclk-period = <5>;
  223                 fsl,tmr-prsc    = <2>;
  224                 fsl,tmr-add     = <0xc01ebd3d>;
  225                 fsl,tmr-fiper1  = <999999995>;
  226                 fsl,tmr-fiper2  = <99990>;
  227                 fsl,max-adj     = <266499999>;
  228         };
  229 
  230         ethernet@b0000 {
  231                 phy-handle = <&phy0>;
  232                 phy-connection-type = "rgmii-id";
  233         };
  234 
  235         ethernet@b1000 {
  236                 phy-handle = <&phy1>;
  237                 phy-connection-type = "rgmii-id";
  238         };
  239 };

Cache object: ce9cec096f24b6313b4383a7f7809db2


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]


This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.