ppa8548.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: GPL-2.0-or-later
    2 /*
    3  * PPA8548 Device Tree Source (36-bit address map)
    4  * Copyright 2013 Prodrive B.V.
    5  *
    6  * Based on:
    7  * MPC8548 CDS Device Tree Source (36-bit address map)
    8  * Copyright 2012 Freescale Semiconductor Inc.
    9  */
   10 
   11 /include/ "mpc8548si-pre.dtsi"
   12 
   13 / {
   14         model = "ppa8548";
   15         compatible = "ppa8548";
   16         #address-cells = <2>;
   17         #size-cells = <2>;
   18         interrupt-parent = <&mpic>;
   19 
   20         memory {
   21                 device_type = "memory";
   22                 reg = <0 0 0x0 0x40000000>;
   23         };
   24 
   25         lbc: localbus@fe0005000 {
   26                 reg = <0xf 0xe0005000 0 0x1000>;
   27                 ranges = <0x0 0x0 0xf 0xff800000 0x00800000>;
   28         };
   29 
   30         soc: soc8548@fe0000000 {
   31                 ranges = <0 0xf 0xe0000000 0x100000>;
   32         };
   33 
   34         pci0: pci@fe0008000 {
   35                 /* ppa8548 board doesn't support PCI */
   36                 status = "disabled";
   37         };
   38 
   39         pci1: pci@fe0009000 {
   40                 /* ppa8548 board doesn't support PCI */
   41                 status = "disabled";
   42         };
   43 
   44         pci2: pcie@fe000a000 {
   45                 /* ppa8548 board doesn't support PCI */
   46                 status = "disabled";
   47         };
   48 
   49         rio: rapidio@fe00c0000 {
   50                 reg = <0xf 0xe00c0000 0x0 0x11000>;
   51                 port1 {
   52                         ranges = <0x0 0x0 0x0 0x80000000 0x0 0x40000000>;
   53                 };
   54         };
   55 };
   56 
   57 &lbc {
   58         nor@0 {
   59                 #address-cells = <1>;
   60                 #size-cells = <1>;
   61                 compatible = "cfi-flash";
   62                 reg = <0x0 0x0 0x00800000>;
   63                 bank-width = <2>;
   64                 device-width = <2>;
   65 
   66                 partition@0 {
   67                         reg = <0x0 0x7A0000>;
   68                         label = "user";
   69                 };
   70 
   71                 partition@7A0000 {
   72                         reg = <0x7A0000 0x20000>;
   73                         label = "env";
   74                         read-only;
   75                 };
   76 
   77                 partition@7C0000 {
   78                         reg = <0x7C0000 0x40000>;
   79                         label = "u-boot";
   80                         read-only;
   81                 };
   82         };
   83 };
   84 
   85 &soc {
   86         i2c@3000 {
   87                 rtc@6f {
   88                         compatible = "intersil,isl1208";
   89                         reg = <0x6f>;
   90                 };
   91         };
   92 
   93         i2c@3100 {
   94         };
   95 
   96         /*
   97          * Only ethernet controller @25000 and @26000 are used.
   98          * Use alias enet2 and enet3 for the remainig controllers,
   99          * to stay compatible with mpc8548si-pre.dtsi.
  100          */
  101         enet2: ethernet@24000 {
  102                 status = "disabled";
  103         };
  104 
  105         mdio@24520 {
  106                 phy0: ethernet-phy@0 {
  107                         interrupts = <7 1 0 0>;
  108                         reg = <0x0>;
  109                 };
  110                 phy1: ethernet-phy@1 {
  111                         interrupts = <8 1 0 0>;
  112                         reg = <0x1>;
  113                 };
  114                 tbi0: tbi-phy@11 {
  115                         reg = <0x11>;
  116                         device_type = "tbi-phy";
  117                 };
  118         };
  119 
  120         enet0: ethernet@25000 {
  121                 tbi-handle = <&tbi1>;
  122                 phy-handle = <&phy0>;
  123         };
  124 
  125         mdio@25520 {
  126                 tbi1: tbi-phy@11 {
  127                         reg = <0x11>;
  128                         device_type = "tbi-phy";
  129                 };
  130         };
  131 
  132         enet1: ethernet@26000 {
  133                 tbi-handle = <&tbi2>;
  134                 phy-handle = <&phy1>;
  135         };
  136 
  137         mdio@26520 {
  138                 tbi2: tbi-phy@11 {
  139                         reg = <0x11>;
  140                         device_type = "tbi-phy";
  141                 };
  142         };
  143 
  144         enet3: ethernet@27000 {
  145                 status = "disabled";
  146         };
  147 
  148         mdio@27520 {
  149                 tbi3: tbi-phy@11 {
  150                         reg = <0x11>;
  151                         device_type = "tbi-phy";
  152                 };
  153         };
  154 
  155         crypto@30000 {
  156                 status = "disabled";
  157         };
  158 };
  159 
  160 /include/ "mpc8548si-post.dtsi"

Cache object: f198dac6afbef8d9c9f50bd8e000f9fe

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/powerpc/fsl/ppa8548.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/powerpc/fsl/ppa8548.dts