Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/powerpc/kmeter1.dts
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Keymile KMETER1 Device Tree Source 4 * 5 * 2008-2011 DENX Software Engineering GmbH 6 */ 7 8 /dts-v1/; 9 10 / { 11 model = "KMETER1"; 12 compatible = "keymile,KMETER1"; 13 #address-cells = <1>; 14 #size-cells = <1>; 15 16 aliases { 17 ethernet0 = &enet_piggy2; 18 ethernet1 = &enet_estar1; 19 ethernet2 = &enet_estar2; 20 ethernet3 = &enet_eth1; 21 ethernet4 = &enet_eth2; 22 ethernet5 = &enet_eth3; 23 ethernet6 = &enet_eth4; 24 serial0 = &serial0; 25 }; 26 27 cpus { 28 #address-cells = <1>; 29 #size-cells = <0>; 30 31 PowerPC,8360@0 { 32 device_type = "cpu"; 33 reg = <0x0>; 34 d-cache-line-size = <32>; // 32 bytes 35 i-cache-line-size = <32>; // 32 bytes 36 d-cache-size = <32768>; // L1, 32K 37 i-cache-size = <32768>; // L1, 32K 38 timebase-frequency = <0>; /* Filled in by U-Boot */ 39 bus-frequency = <0>; /* Filled in by U-Boot */ 40 clock-frequency = <0>; /* Filled in by U-Boot */ 41 }; 42 }; 43 44 memory { 45 device_type = "memory"; 46 reg = <0 0>; /* Filled in by U-Boot */ 47 }; 48 49 soc8360@e0000000 { 50 #address-cells = <1>; 51 #size-cells = <1>; 52 device_type = "soc"; 53 compatible = "fsl,mpc8360-immr", "simple-bus"; 54 ranges = <0x0 0xe0000000 0x00200000>; 55 reg = <0xe0000000 0x00000200>; 56 bus-frequency = <0>; /* Filled in by U-Boot */ 57 58 pmc: power@b00 { 59 compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc"; 60 reg = <0xb00 0x100 0xa00 0x100>; 61 interrupts = <80 0x8>; 62 interrupt-parent = <&ipic>; 63 }; 64 65 i2c@3000 { 66 #address-cells = <1>; 67 #size-cells = <0>; 68 cell-index = <0>; 69 compatible = "fsl,mpc8313-i2c","fsl-i2c"; 70 reg = <0x3000 0x100>; 71 interrupts = <14 0x8>; 72 interrupt-parent = <&ipic>; 73 clock-frequency = <400000>; 74 }; 75 76 serial0: serial@4500 { 77 cell-index = <0>; 78 device_type = "serial"; 79 compatible = "fsl,ns16550", "ns16550"; 80 reg = <0x4500 0x100>; 81 clock-frequency = <264000000>; 82 interrupts = <9 0x8>; 83 interrupt-parent = <&ipic>; 84 }; 85 86 dma@82a8 { 87 #address-cells = <1>; 88 #size-cells = <1>; 89 compatible = "fsl,mpc8360-dma", "fsl,elo-dma"; 90 reg = <0x82a8 4>; 91 ranges = <0 0x8100 0x1a8>; 92 interrupt-parent = <&ipic>; 93 interrupts = <71 8>; 94 cell-index = <0>; 95 dma-channel@0 { 96 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; 97 reg = <0 0x80>; 98 interrupt-parent = <&ipic>; 99 interrupts = <71 8>; 100 }; 101 dma-channel@80 { 102 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; 103 reg = <0x80 0x80>; 104 interrupt-parent = <&ipic>; 105 interrupts = <71 8>; 106 }; 107 dma-channel@100 { 108 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; 109 reg = <0x100 0x80>; 110 interrupt-parent = <&ipic>; 111 interrupts = <71 8>; 112 }; 113 dma-channel@180 { 114 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; 115 reg = <0x180 0x28>; 116 interrupt-parent = <&ipic>; 117 interrupts = <71 8>; 118 }; 119 }; 120 121 ipic: pic@700 { 122 #address-cells = <0>; 123 #interrupt-cells = <2>; 124 compatible = "fsl,pq2pro-pic", "fsl,ipic"; 125 interrupt-controller; 126 reg = <0x700 0x100>; 127 }; 128 129 par_io@1400 { 130 #address-cells = <1>; 131 #size-cells = <0>; 132 reg = <0x1400 0x100>; 133 compatible = "fsl,mpc8360-par_io"; 134 num-ports = <7>; 135 136 qe_pio_c: gpio-controller@30 { 137 #gpio-cells = <2>; 138 compatible = "fsl,mpc8360-qe-pario-bank", 139 "fsl,mpc8323-qe-pario-bank"; 140 reg = <0x1430 0x18>; 141 gpio-controller; 142 }; 143 pio_ucc1: ucc_pin@0 { 144 reg = <0>; 145 146 pio-map = < 147 /* port pin dir open_drain assignment has_irq */ 148 0 1 3 0 2 0 /* MDIO */ 149 0 2 1 0 1 0 /* MDC */ 150 151 0 3 1 0 1 0 /* TxD0 */ 152 0 4 1 0 1 0 /* TxD1 */ 153 0 5 1 0 1 0 /* TxD2 */ 154 0 6 1 0 1 0 /* TxD3 */ 155 0 9 2 0 1 0 /* RxD0 */ 156 0 10 2 0 1 0 /* RxD1 */ 157 0 11 2 0 1 0 /* RxD2 */ 158 0 12 2 0 1 0 /* RxD3 */ 159 0 7 1 0 1 0 /* TX_EN */ 160 0 8 1 0 1 0 /* TX_ER */ 161 0 15 2 0 1 0 /* RX_DV */ 162 0 16 2 0 1 0 /* RX_ER */ 163 0 0 2 0 1 0 /* RX_CLK */ 164 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ 165 2 8 2 0 1 0 /* GTX125 - CLK9 */ 166 >; 167 }; 168 169 pio_ucc2: ucc_pin@1 { 170 reg = <1>; 171 172 pio-map = < 173 /* port pin dir open_drain assignment has_irq */ 174 0 1 3 0 2 0 /* MDIO */ 175 0 2 1 0 1 0 /* MDC */ 176 177 0 17 1 0 1 0 /* TxD0 */ 178 0 18 1 0 1 0 /* TxD1 */ 179 0 19 1 0 1 0 /* TxD2 */ 180 0 20 1 0 1 0 /* TxD3 */ 181 0 23 2 0 1 0 /* RxD0 */ 182 0 24 2 0 1 0 /* RxD1 */ 183 0 25 2 0 1 0 /* RxD2 */ 184 0 26 2 0 1 0 /* RxD3 */ 185 0 21 1 0 1 0 /* TX_EN */ 186 0 22 1 0 1 0 /* TX_ER */ 187 0 29 2 0 1 0 /* RX_DV */ 188 0 30 2 0 1 0 /* RX_ER */ 189 0 31 2 0 1 0 /* RX_CLK */ 190 2 2 1 0 2 0 /* GTX_CLK - CLK3 */ 191 2 3 2 0 1 0 /* GTX125 - CLK4 */ 192 >; 193 }; 194 195 pio_ucc4: ucc_pin@3 { 196 reg = <3>; 197 198 pio-map = < 199 /* port pin dir open_drain assignment has_irq */ 200 0 1 3 0 2 0 /* MDIO */ 201 0 2 1 0 1 0 /* MDC */ 202 203 1 14 1 0 1 0 /* TxD0 (PB14, out, f1) */ 204 1 15 1 0 1 0 /* TxD1 (PB15, out, f1) */ 205 1 20 2 0 1 0 /* RxD0 (PB20, in, f1) */ 206 1 21 2 0 1 0 /* RxD1 (PB21, in, f1) */ 207 1 18 1 0 1 0 /* TX_EN (PB18, out, f1) */ 208 1 26 2 0 1 0 /* RX_DV (PB26, in, f1) */ 209 1 27 2 0 1 0 /* RX_ER (PB27, in, f1) */ 210 211 2 16 2 0 1 0 /* UCC4_RMII_CLK (CLK17) */ 212 >; 213 }; 214 215 pio_ucc5: ucc_pin@4 { 216 reg = <4>; 217 218 pio-map = < 219 /* port pin dir open_drain assignment has_irq */ 220 0 1 3 0 2 0 /* MDIO */ 221 0 2 1 0 1 0 /* MDC */ 222 223 3 0 1 0 1 0 /* TxD0 (PD0, out, f1) */ 224 3 1 1 0 1 0 /* TxD1 (PD1, out, f1) */ 225 3 6 2 0 1 0 /* RxD0 (PD6, in, f1) */ 226 3 7 2 0 1 0 /* RxD1 (PD7, in, f1) */ 227 3 4 1 0 1 0 /* TX_EN (PD4, out, f1) */ 228 3 12 2 0 1 0 /* RX_DV (PD12, in, f1) */ 229 3 13 2 0 1 0 /* RX_ER (PD13, in, f1) */ 230 >; 231 }; 232 233 pio_ucc6: ucc_pin@5 { 234 reg = <5>; 235 236 pio-map = < 237 /* port pin dir open_drain assignment has_irq */ 238 0 1 3 0 2 0 /* MDIO */ 239 0 2 1 0 1 0 /* MDC */ 240 241 3 14 1 0 1 0 /* TxD0 (PD14, out, f1) */ 242 3 15 1 0 1 0 /* TxD1 (PD15, out, f1) */ 243 3 20 2 0 1 0 /* RxD0 (PD20, in, f1) */ 244 3 21 2 0 1 0 /* RxD1 (PD21, in, f1) */ 245 3 18 1 0 1 0 /* TX_EN (PD18, out, f1) */ 246 3 26 2 0 1 0 /* RX_DV (PD26, in, f1) */ 247 3 27 2 0 1 0 /* RX_ER (PD27, in, f1) */ 248 >; 249 }; 250 251 pio_ucc7: ucc_pin@6 { 252 reg = <6>; 253 254 pio-map = < 255 /* port pin dir open_drain assignment has_irq */ 256 0 1 3 0 2 0 /* MDIO */ 257 0 2 1 0 1 0 /* MDC */ 258 259 4 0 1 0 1 0 /* TxD0 (PE0, out, f1) */ 260 4 1 1 0 1 0 /* TxD1 (PE1, out, f1) */ 261 4 6 2 0 1 0 /* RxD0 (PE6, in, f1) */ 262 4 7 2 0 1 0 /* RxD1 (PE7, in, f1) */ 263 4 4 1 0 1 0 /* TX_EN (PE4, out, f1) */ 264 4 12 2 0 1 0 /* RX_DV (PE12, in, f1) */ 265 4 13 2 0 1 0 /* RX_ER (PE13, in, f1) */ 266 >; 267 }; 268 269 pio_ucc8: ucc_pin@7 { 270 reg = <7>; 271 272 pio-map = < 273 /* port pin dir open_drain assignment has_irq */ 274 0 1 3 0 2 0 /* MDIO */ 275 0 2 1 0 1 0 /* MDC */ 276 277 4 14 1 0 2 0 /* TxD0 (PE14, out, f2) */ 278 4 15 1 0 1 0 /* TxD1 (PE15, out, f1) */ 279 4 20 2 0 1 0 /* RxD0 (PE20, in, f1) */ 280 4 21 2 0 1 0 /* RxD1 (PE21, in, f1) */ 281 4 18 1 0 1 0 /* TX_EN (PE18, out, f1) */ 282 4 26 2 0 1 0 /* RX_DV (PE26, in, f1) */ 283 4 27 2 0 1 0 /* RX_ER (PE27, in, f1) */ 284 285 2 15 2 0 1 0 /* UCCx_RMII_CLK (CLK16) */ 286 >; 287 }; 288 289 }; 290 291 qe@100000 { 292 #address-cells = <1>; 293 #size-cells = <1>; 294 compatible = "fsl,qe"; 295 ranges = <0x0 0x100000 0x100000>; 296 reg = <0x100000 0x480>; 297 clock-frequency = <0>; /* Filled in by U-Boot */ 298 brg-frequency = <0>; /* Filled in by U-Boot */ 299 bus-frequency = <0>; /* Filled in by U-Boot */ 300 301 muram@10000 { 302 #address-cells = <1>; 303 #size-cells = <1>; 304 compatible = "fsl,qe-muram", "fsl,cpm-muram"; 305 ranges = <0x0 0x00010000 0x0000c000>; 306 307 data-only@0 { 308 compatible = "fsl,qe-muram-data", 309 "fsl,cpm-muram-data"; 310 reg = <0x0 0xc000>; 311 }; 312 }; 313 314 /* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */ 315 enet_estar1: ucc@2000 { 316 device_type = "network"; 317 compatible = "ucc_geth"; 318 cell-index = <1>; 319 reg = <0x2000 0x200>; 320 interrupts = <32>; 321 interrupt-parent = <&qeic>; 322 local-mac-address = [ 00 00 00 00 00 00 ]; 323 rx-clock-name = "none"; 324 tx-clock-name = "clk9"; 325 phy-handle = <&phy_estar1>; 326 phy-connection-type = "rgmii-id"; 327 pio-handle = <&pio_ucc1>; 328 }; 329 330 /* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */ 331 enet_estar2: ucc@3000 { 332 device_type = "network"; 333 compatible = "ucc_geth"; 334 cell-index = <2>; 335 reg = <0x3000 0x200>; 336 interrupts = <33>; 337 interrupt-parent = <&qeic>; 338 local-mac-address = [ 00 00 00 00 00 00 ]; 339 rx-clock-name = "none"; 340 tx-clock-name = "clk4"; 341 phy-handle = <&phy_estar2>; 342 phy-connection-type = "rgmii-id"; 343 pio-handle = <&pio_ucc2>; 344 }; 345 346 /* Piggy2 (UCC4, MDIO 0x00, RMII) */ 347 enet_piggy2: ucc@3200 { 348 device_type = "network"; 349 compatible = "ucc_geth"; 350 cell-index = <4>; 351 reg = <0x3200 0x200>; 352 interrupts = <35>; 353 interrupt-parent = <&qeic>; 354 local-mac-address = [ 00 00 00 00 00 00 ]; 355 rx-clock-name = "none"; 356 tx-clock-name = "clk17"; 357 phy-handle = <&phy_piggy2>; 358 phy-connection-type = "rmii"; 359 pio-handle = <&pio_ucc4>; 360 }; 361 362 /* Eth-1 (UCC5, MDIO 0x08, RMII) */ 363 enet_eth1: ucc@2400 { 364 device_type = "network"; 365 compatible = "ucc_geth"; 366 cell-index = <5>; 367 reg = <0x2400 0x200>; 368 interrupts = <40>; 369 interrupt-parent = <&qeic>; 370 local-mac-address = [ 00 00 00 00 00 00 ]; 371 rx-clock-name = "none"; 372 tx-clock-name = "clk16"; 373 phy-handle = <&phy_eth1>; 374 phy-connection-type = "rmii"; 375 pio-handle = <&pio_ucc5>; 376 }; 377 378 /* Eth-2 (UCC6, MDIO 0x09, RMII) */ 379 enet_eth2: ucc@3400 { 380 device_type = "network"; 381 compatible = "ucc_geth"; 382 cell-index = <6>; 383 reg = <0x3400 0x200>; 384 interrupts = <41>; 385 interrupt-parent = <&qeic>; 386 local-mac-address = [ 00 00 00 00 00 00 ]; 387 rx-clock-name = "none"; 388 tx-clock-name = "clk16"; 389 phy-handle = <&phy_eth2>; 390 phy-connection-type = "rmii"; 391 pio-handle = <&pio_ucc6>; 392 }; 393 394 /* Eth-3 (UCC7, MDIO 0x0a, RMII) */ 395 enet_eth3: ucc@2600 { 396 device_type = "network"; 397 compatible = "ucc_geth"; 398 cell-index = <7>; 399 reg = <0x2600 0x200>; 400 interrupts = <42>; 401 interrupt-parent = <&qeic>; 402 local-mac-address = [ 00 00 00 00 00 00 ]; 403 rx-clock-name = "none"; 404 tx-clock-name = "clk16"; 405 phy-handle = <&phy_eth3>; 406 phy-connection-type = "rmii"; 407 pio-handle = <&pio_ucc7>; 408 }; 409 410 /* Eth-4 (UCC8, MDIO 0x0b, RMII) */ 411 enet_eth4: ucc@3600 { 412 device_type = "network"; 413 compatible = "ucc_geth"; 414 cell-index = <8>; 415 reg = <0x3600 0x200>; 416 interrupts = <43>; 417 interrupt-parent = <&qeic>; 418 local-mac-address = [ 00 00 00 00 00 00 ]; 419 rx-clock-name = "none"; 420 tx-clock-name = "clk16"; 421 phy-handle = <&phy_eth4>; 422 phy-connection-type = "rmii"; 423 pio-handle = <&pio_ucc8>; 424 }; 425 426 mdio@3320 { 427 #address-cells = <1>; 428 #size-cells = <0>; 429 reg = <0x3320 0x18>; 430 compatible = "fsl,ucc-mdio"; 431 432 /* Piggy2 (UCC4, MDIO 0x00, RMII) */ 433 phy_piggy2: ethernet-phy@0 { 434 reg = <0x0>; 435 }; 436 437 /* Eth-1 (UCC5, MDIO 0x08, RMII) */ 438 phy_eth1: ethernet-phy@8 { 439 reg = <0x08>; 440 }; 441 442 /* Eth-2 (UCC6, MDIO 0x09, RMII) */ 443 phy_eth2: ethernet-phy@9 { 444 reg = <0x09>; 445 }; 446 447 /* Eth-3 (UCC7, MDIO 0x0a, RMII) */ 448 phy_eth3: ethernet-phy@a { 449 reg = <0x0a>; 450 }; 451 452 /* Eth-4 (UCC8, MDIO 0x0b, RMII) */ 453 phy_eth4: ethernet-phy@b { 454 reg = <0x0b>; 455 }; 456 457 /* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */ 458 phy_estar1: ethernet-phy@10 { 459 interrupt-parent = <&ipic>; 460 interrupts = <17 0x8>; 461 reg = <0x10>; 462 }; 463 464 /* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */ 465 phy_estar2: ethernet-phy@11 { 466 interrupt-parent = <&ipic>; 467 interrupts = <18 0x8>; 468 reg = <0x11>; 469 }; 470 }; 471 472 qeic: interrupt-controller@80 { 473 interrupt-controller; 474 compatible = "fsl,qe-ic"; 475 #address-cells = <0>; 476 #interrupt-cells = <1>; 477 reg = <0x80 0x80>; 478 big-endian; 479 interrupts = < 480 32 0x8 481 33 0x8 482 34 0x8 483 35 0x8 484 40 0x8 485 41 0x8 486 42 0x8 487 43 0x8 488 >; 489 interrupt-parent = <&ipic>; 490 }; 491 }; 492 }; 493 494 localbus@e0005000 { 495 #address-cells = <2>; 496 #size-cells = <1>; 497 compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus", 498 "simple-bus"; 499 reg = <0xe0005000 0xd8>; 500 ranges = <0 0 0xf0000000 0x04000000 /* LB 0 */ 501 1 0 0xe8000000 0x01000000 /* LB 1 */ 502 3 0 0xa0000000 0x10000000>; /* LB 3 */ 503 504 flash@0,0 { 505 compatible = "cfi-flash"; 506 reg = <0 0 0x04000000>; 507 #address-cells = <1>; 508 #size-cells = <1>; 509 bank-width = <2>; 510 partition@0 { /* 768KB */ 511 label = "u-boot"; 512 reg = <0 0xC0000>; 513 }; 514 partition@c0000 { /* 128KB */ 515 label = "env"; 516 reg = <0xC0000 0x20000>; 517 }; 518 partition@e0000 { /* 128KB */ 519 label = "envred"; 520 reg = <0xE0000 0x20000>; 521 }; 522 partition@100000 { /* 64512KB */ 523 label = "ubi0"; 524 reg = <0x100000 0x3F00000>; 525 }; 526 }; 527 }; 528 };
Cache object: cb7895fedf6c21109fd559755627eb37
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]