Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/powerpc/xpedite5200.dts
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) 2009 Extreme Engineering Solutions, Inc. 4 * Based on TQM8548 device tree 5 * 6 * XPedite5200 PrPMC/XMC module based on MPC8548E 7 */ 8 9 /dts-v1/; 10 11 / { 12 model = "xes,xpedite5200"; 13 compatible = "xes,xpedite5200", "xes,MPC8548"; 14 #address-cells = <1>; 15 #size-cells = <1>; 16 17 aliases { 18 ethernet0 = &enet0; 19 ethernet1 = &enet1; 20 ethernet2 = &enet2; 21 ethernet3 = &enet3; 22 23 serial0 = &serial0; 24 serial1 = &serial1; 25 pci0 = &pci0; 26 }; 27 28 cpus { 29 #address-cells = <1>; 30 #size-cells = <0>; 31 32 PowerPC,8548@0 { 33 device_type = "cpu"; 34 reg = <0>; 35 d-cache-line-size = <32>; // 32 bytes 36 i-cache-line-size = <32>; // 32 bytes 37 d-cache-size = <0x8000>; // L1, 32K 38 i-cache-size = <0x8000>; // L1, 32K 39 next-level-cache = <&L2>; 40 }; 41 }; 42 43 memory { 44 device_type = "memory"; 45 reg = <0x0 0x0>; // Filled in by U-Boot 46 }; 47 48 soc@ef000000 { 49 #address-cells = <1>; 50 #size-cells = <1>; 51 device_type = "soc"; 52 ranges = <0x0 0xef000000 0x100000>; 53 bus-frequency = <0>; 54 compatible = "fsl,mpc8548-immr", "simple-bus"; 55 56 ecm-law@0 { 57 compatible = "fsl,ecm-law"; 58 reg = <0x0 0x1000>; 59 fsl,num-laws = <12>; 60 }; 61 62 ecm@1000 { 63 compatible = "fsl,mpc8548-ecm", "fsl,ecm"; 64 reg = <0x1000 0x1000>; 65 interrupts = <17 2>; 66 interrupt-parent = <&mpic>; 67 }; 68 69 memory-controller@2000 { 70 compatible = "fsl,mpc8548-memory-controller"; 71 reg = <0x2000 0x1000>; 72 interrupt-parent = <&mpic>; 73 interrupts = <18 2>; 74 }; 75 76 L2: l2-cache-controller@20000 { 77 compatible = "fsl,mpc8548-l2-cache-controller"; 78 reg = <0x20000 0x1000>; 79 cache-line-size = <32>; // 32 bytes 80 cache-size = <0x80000>; // L2, 512K 81 interrupt-parent = <&mpic>; 82 interrupts = <16 2>; 83 }; 84 85 /* On-card I2C */ 86 i2c@3000 { 87 #address-cells = <1>; 88 #size-cells = <0>; 89 cell-index = <0>; 90 compatible = "fsl-i2c"; 91 reg = <0x3000 0x100>; 92 interrupts = <43 2>; 93 interrupt-parent = <&mpic>; 94 dfsrr; 95 96 /* 97 * Board GPIO: 98 * 0: BRD_CFG0 (1: P14 IO present) 99 * 1: BRD_CFG1 (1: FP ethernet present) 100 * 2: BRD_CFG2 (1: XMC IO present) 101 * 3: XMC root complex indicator 102 * 4: Flash boot device indicator 103 * 5: Flash write protect enable 104 * 6: PMC monarch indicator 105 * 7: PMC EREADY 106 */ 107 gpio1: gpio@18 { 108 compatible = "nxp,pca9556"; 109 reg = <0x18>; 110 #gpio-cells = <2>; 111 gpio-controller; 112 polarity = <0x00>; 113 }; 114 115 /* P14 GPIO */ 116 gpio2: gpio@19 { 117 compatible = "nxp,pca9556"; 118 reg = <0x19>; 119 #gpio-cells = <2>; 120 gpio-controller; 121 polarity = <0x00>; 122 }; 123 124 eeprom@50 { 125 compatible = "atmel,at24c16"; 126 reg = <0x50>; 127 }; 128 129 rtc@68 { 130 compatible = "st,m41t00", 131 "dallas,ds1338"; 132 reg = <0x68>; 133 }; 134 135 dtt@34 { 136 compatible = "maxim,max1237"; 137 reg = <0x34>; 138 }; 139 }; 140 141 /* Off-card I2C */ 142 i2c@3100 { 143 #address-cells = <1>; 144 #size-cells = <0>; 145 cell-index = <1>; 146 compatible = "fsl-i2c"; 147 reg = <0x3100 0x100>; 148 interrupts = <43 2>; 149 interrupt-parent = <&mpic>; 150 dfsrr; 151 }; 152 153 dma@21300 { 154 #address-cells = <1>; 155 #size-cells = <1>; 156 compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; 157 reg = <0x21300 0x4>; 158 ranges = <0x0 0x21100 0x200>; 159 cell-index = <0>; 160 dma-channel@0 { 161 compatible = "fsl,mpc8548-dma-channel", 162 "fsl,eloplus-dma-channel"; 163 reg = <0x0 0x80>; 164 cell-index = <0>; 165 interrupt-parent = <&mpic>; 166 interrupts = <20 2>; 167 }; 168 dma-channel@80 { 169 compatible = "fsl,mpc8548-dma-channel", 170 "fsl,eloplus-dma-channel"; 171 reg = <0x80 0x80>; 172 cell-index = <1>; 173 interrupt-parent = <&mpic>; 174 interrupts = <21 2>; 175 }; 176 dma-channel@100 { 177 compatible = "fsl,mpc8548-dma-channel", 178 "fsl,eloplus-dma-channel"; 179 reg = <0x100 0x80>; 180 cell-index = <2>; 181 interrupt-parent = <&mpic>; 182 interrupts = <22 2>; 183 }; 184 dma-channel@180 { 185 compatible = "fsl,mpc8548-dma-channel", 186 "fsl,eloplus-dma-channel"; 187 reg = <0x180 0x80>; 188 cell-index = <3>; 189 interrupt-parent = <&mpic>; 190 interrupts = <23 2>; 191 }; 192 }; 193 194 /* eTSEC1: Front panel port 0 */ 195 enet0: ethernet@24000 { 196 #address-cells = <1>; 197 #size-cells = <1>; 198 cell-index = <0>; 199 device_type = "network"; 200 model = "eTSEC"; 201 compatible = "gianfar"; 202 reg = <0x24000 0x1000>; 203 ranges = <0x0 0x24000 0x1000>; 204 local-mac-address = [ 00 00 00 00 00 00 ]; 205 interrupts = <29 2 30 2 34 2>; 206 interrupt-parent = <&mpic>; 207 tbi-handle = <&tbi0>; 208 phy-handle = <&phy0>; 209 210 mdio@520 { 211 #address-cells = <1>; 212 #size-cells = <0>; 213 compatible = "fsl,gianfar-mdio"; 214 reg = <0x520 0x20>; 215 216 phy0: ethernet-phy@1 { 217 interrupt-parent = <&mpic>; 218 interrupts = <8 1>; 219 reg = <0x1>; 220 }; 221 phy1: ethernet-phy@2 { 222 interrupt-parent = <&mpic>; 223 interrupts = <8 1>; 224 reg = <0x2>; 225 }; 226 phy2: ethernet-phy@3 { 227 interrupt-parent = <&mpic>; 228 interrupts = <8 1>; 229 reg = <0x3>; 230 }; 231 phy3: ethernet-phy@4 { 232 interrupt-parent = <&mpic>; 233 interrupts = <8 1>; 234 reg = <0x4>; 235 }; 236 tbi0: tbi-phy@11 { 237 reg = <0x11>; 238 device_type = "tbi-phy"; 239 }; 240 }; 241 }; 242 243 /* eTSEC2: Front panel port 1 */ 244 enet1: ethernet@25000 { 245 #address-cells = <1>; 246 #size-cells = <1>; 247 cell-index = <1>; 248 device_type = "network"; 249 model = "eTSEC"; 250 compatible = "gianfar"; 251 reg = <0x25000 0x1000>; 252 ranges = <0x0 0x25000 0x1000>; 253 local-mac-address = [ 00 00 00 00 00 00 ]; 254 interrupts = <35 2 36 2 40 2>; 255 interrupt-parent = <&mpic>; 256 tbi-handle = <&tbi1>; 257 phy-handle = <&phy1>; 258 259 mdio@520 { 260 #address-cells = <1>; 261 #size-cells = <0>; 262 compatible = "fsl,gianfar-tbi"; 263 reg = <0x520 0x20>; 264 265 tbi1: tbi-phy@11 { 266 reg = <0x11>; 267 device_type = "tbi-phy"; 268 }; 269 }; 270 }; 271 272 /* eTSEC3: Rear panel port 2 */ 273 enet2: ethernet@26000 { 274 #address-cells = <1>; 275 #size-cells = <1>; 276 cell-index = <2>; 277 device_type = "network"; 278 model = "eTSEC"; 279 compatible = "gianfar"; 280 reg = <0x26000 0x1000>; 281 ranges = <0x0 0x26000 0x1000>; 282 local-mac-address = [ 00 00 00 00 00 00 ]; 283 interrupts = <31 2 32 2 33 2>; 284 interrupt-parent = <&mpic>; 285 tbi-handle = <&tbi2>; 286 phy-handle = <&phy2>; 287 288 mdio@520 { 289 #address-cells = <1>; 290 #size-cells = <0>; 291 compatible = "fsl,gianfar-tbi"; 292 reg = <0x520 0x20>; 293 294 tbi2: tbi-phy@11 { 295 reg = <0x11>; 296 device_type = "tbi-phy"; 297 }; 298 }; 299 }; 300 301 /* eTSEC4: Rear panel port 3 */ 302 enet3: ethernet@27000 { 303 #address-cells = <1>; 304 #size-cells = <1>; 305 cell-index = <3>; 306 device_type = "network"; 307 model = "eTSEC"; 308 compatible = "gianfar"; 309 reg = <0x27000 0x1000>; 310 ranges = <0x0 0x27000 0x1000>; 311 local-mac-address = [ 00 00 00 00 00 00 ]; 312 interrupts = <37 2 38 2 39 2>; 313 interrupt-parent = <&mpic>; 314 tbi-handle = <&tbi3>; 315 phy-handle = <&phy3>; 316 317 mdio@520 { 318 #address-cells = <1>; 319 #size-cells = <0>; 320 compatible = "fsl,gianfar-tbi"; 321 reg = <0x520 0x20>; 322 323 tbi3: tbi-phy@11 { 324 reg = <0x11>; 325 device_type = "tbi-phy"; 326 }; 327 }; 328 }; 329 330 serial0: serial@4500 { 331 cell-index = <0>; 332 device_type = "serial"; 333 compatible = "fsl,ns16550", "ns16550"; 334 reg = <0x4500 0x100>; 335 clock-frequency = <0>; 336 current-speed = <115200>; 337 interrupts = <42 2>; 338 interrupt-parent = <&mpic>; 339 }; 340 341 serial1: serial@4600 { 342 cell-index = <1>; 343 device_type = "serial"; 344 compatible = "fsl,ns16550", "ns16550"; 345 reg = <0x4600 0x100>; 346 clock-frequency = <0>; 347 current-speed = <115200>; 348 interrupts = <42 2>; 349 interrupt-parent = <&mpic>; 350 }; 351 352 global-utilities@e0000 { // global utilities reg 353 compatible = "fsl,mpc8548-guts"; 354 reg = <0xe0000 0x1000>; 355 fsl,has-rstcr; 356 }; 357 358 mpic: pic@40000 { 359 interrupt-controller; 360 #address-cells = <0>; 361 #interrupt-cells = <2>; 362 reg = <0x40000 0x40000>; 363 compatible = "chrp,open-pic"; 364 device_type = "open-pic"; 365 }; 366 }; 367 368 localbus@ef005000 { 369 compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus", 370 "simple-bus"; 371 #address-cells = <2>; 372 #size-cells = <1>; 373 reg = <0xef005000 0x100>; // BRx, ORx, etc. 374 interrupt-parent = <&mpic>; 375 interrupts = <19 2>; 376 377 ranges = < 378 0 0x0 0xfc000000 0x04000000 // NOR boot flash 379 1 0x0 0xf8000000 0x04000000 // NOR expansion flash 380 2 0x0 0xef800000 0x00010000 // NAND CE1 381 3 0x0 0xef840000 0x00010000 // NAND CE2 382 >; 383 384 nor-boot@0,0 { 385 #address-cells = <1>; 386 #size-cells = <1>; 387 compatible = "cfi-flash"; 388 reg = <0 0x0 0x4000000>; 389 bank-width = <2>; 390 391 partition@0 { 392 label = "Primary OS"; 393 reg = <0x00000000 0x180000>; 394 }; 395 partition@180000 { 396 label = "Secondary OS"; 397 reg = <0x00180000 0x180000>; 398 }; 399 partition@300000 { 400 label = "User"; 401 reg = <0x00300000 0x3c80000>; 402 }; 403 partition@3f80000 { 404 label = "Boot firmware"; 405 reg = <0x03f80000 0x80000>; 406 }; 407 }; 408 409 nor-alternate@1,0 { 410 #address-cells = <1>; 411 #size-cells = <1>; 412 compatible = "cfi-flash"; 413 reg = <1 0x0 0x4000000>; 414 bank-width = <2>; 415 416 partition@0 { 417 label = "Filesystem"; 418 reg = <0x00000000 0x3f80000>; 419 }; 420 partition@3f80000 { 421 label = "Alternate boot firmware"; 422 reg = <0x03f80000 0x80000>; 423 }; 424 }; 425 426 nand@2,0 { 427 #address-cells = <1>; 428 #size-cells = <1>; 429 compatible = "xes,address-ctl-nand"; 430 reg = <2 0x0 0x10000>; 431 cle-line = <0x8>; /* CLE tied to A3 */ 432 ale-line = <0x10>; /* ALE tied to A4 */ 433 434 /* U-Boot should fix this up */ 435 partition@0 { 436 label = "NAND Filesystem"; 437 reg = <0 0x40000000>; 438 }; 439 }; 440 }; 441 442 /* PMC interface */ 443 pci0: pci@ef008000 { 444 #interrupt-cells = <1>; 445 #size-cells = <2>; 446 #address-cells = <3>; 447 compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; 448 device_type = "pci"; 449 reg = <0xef008000 0x1000>; 450 clock-frequency = <33333333>; 451 interrupt-map-mask = <0xf800 0x0 0x0 0x7>; 452 interrupt-map = < 453 /* IDSEL */ 454 0xe000 0 0 1 &mpic 2 1 455 0xe000 0 0 2 &mpic 3 1>; 456 457 interrupt-parent = <&mpic>; 458 interrupts = <24 2>; 459 bus-range = <0 0>; 460 ranges = <0x02000000 0 0x80000000 0x80000000 0 0x40000000 461 0x01000000 0 0x00000000 0xe8000000 0 0x00800000>; 462 }; 463 464 /* XMC PCIe is not yet enabled in U-Boot on XPedite5200 */ 465 };
Cache object: 9bf1dbe40d8a69e22977811bc3221878
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]