FreeBSD/Linux Kernel Cross Reference
sys/contrib/edk2/Include/Protocol/DebugPort.h

     /** @file
     
       The file defines the EFI Debugport protocol.
       This protocol is used by debug agent to communicate with the
       remote debug host.
     
       Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
       SPDX-License-Identifier: BSD-2-Clause-Patent
     
    **/
    
    #ifndef __DEBUG_PORT_H__
    #define __DEBUG_PORT_H__
    
    
    ///
    /// DebugPortIo protocol {EBA4E8D2-3858-41EC-A281-2647BA9660D0}
    ///
    #define EFI_DEBUGPORT_PROTOCOL_GUID \
      { \
        0xEBA4E8D2, 0x3858, 0x41EC, {0xA2, 0x81, 0x26, 0x47, 0xBA, 0x96, 0x60, 0xD0 } \
      }
    
    extern EFI_GUID gEfiDebugPortProtocolGuid;
    
    typedef struct _EFI_DEBUGPORT_PROTOCOL EFI_DEBUGPORT_PROTOCOL;
    
    //
    // DebugPort member functions
    //
    
    /**
      Resets the debugport.
    
      @param  This                  A pointer to the EFI_DEBUGPORT_PROTOCOL instance.
    
      @retval EFI_SUCCESS           The debugport device was reset and is in usable state.
      @retval EFI_DEVICE_ERROR      The debugport device could not be reset and is unusable.
    
    **/
    typedef
    EFI_STATUS
    (EFIAPI *EFI_DEBUGPORT_RESET)(
      IN EFI_DEBUGPORT_PROTOCOL               *This
      );
    
    /**
      Writes data to the debugport.
    
      @param  This                  A pointer to the EFI_DEBUGPORT_PROTOCOL instance.
      @param  Timeout               The number of microseconds to wait before timing out a write operation.
      @param  BufferSize            On input, the requested number of bytes of data to write. On output, the
                                    number of bytes of data actually written.
      @param  Buffer                A pointer to a buffer containing the data to write.
    
      @retval EFI_SUCCESS           The data was written.
      @retval EFI_DEVICE_ERROR      The device reported an error.
      @retval EFI_TIMEOUT           The data write was stopped due to a timeout.
    
    **/
    typedef
    EFI_STATUS
    (EFIAPI *EFI_DEBUGPORT_WRITE)(
      IN EFI_DEBUGPORT_PROTOCOL               *This,
      IN UINT32                               Timeout,
      IN OUT UINTN                            *BufferSize,
      IN VOID                                 *Buffer
      );
    
    /**
      Reads data from the debugport.
    
      @param  This                  A pointer to the EFI_DEBUGPORT_PROTOCOL instance.
      @param  Timeout               The number of microseconds to wait before timing out a read operation.
      @param  BufferSize            On input, the requested number of bytes of data to read. On output, the
                                    number of bytes of data actually number of bytes
                                    of data read and returned in Buffer.
      @param  Buffer                A pointer to a buffer into which the data read will be saved.
    
      @retval EFI_SUCCESS           The data was read.
      @retval EFI_DEVICE_ERROR      The device reported an error.
      @retval EFI_TIMEOUT           The operation was stopped due to a timeout or overrun.
    
    **/
    typedef
    EFI_STATUS
    (EFIAPI *EFI_DEBUGPORT_READ)(
      IN EFI_DEBUGPORT_PROTOCOL               *This,
      IN UINT32                               Timeout,
      IN OUT UINTN                            *BufferSize,
      OUT VOID                                *Buffer
      );
    
    /**
      Checks to see if any data is available to be read from the debugport device.
    
      @param  This                  A pointer to the EFI_DEBUGPORT_PROTOCOL instance.
    
      @retval EFI_SUCCESS           At least one byte of data is available to be read.
     @retval EFI_DEVICE_ERROR      The debugport device is not functioning correctly.
     @retval EFI_NOT_READY         No data is available to be read.
   
   **/
   typedef
   EFI_STATUS
   (EFIAPI *EFI_DEBUGPORT_POLL)(
     IN EFI_DEBUGPORT_PROTOCOL               *This
     );
   
   ///
   /// This protocol provides the communication link between the debug agent and the remote host.
   ///
   struct _EFI_DEBUGPORT_PROTOCOL {
     EFI_DEBUGPORT_RESET Reset;
     EFI_DEBUGPORT_WRITE Write;
     EFI_DEBUGPORT_READ  Read;
     EFI_DEBUGPORT_POLL  Poll;
   };
   
   //
   // DEBUGPORT variable definitions...
   //
   #define EFI_DEBUGPORT_VARIABLE_NAME L"DEBUGPORT"
   #define EFI_DEBUGPORT_VARIABLE_GUID EFI_DEBUGPORT_PROTOCOL_GUID
   
   extern EFI_GUID  gEfiDebugPortVariableGuid;
   
   //
   // DebugPort device path definitions...
   //
   #define DEVICE_PATH_MESSAGING_DEBUGPORT EFI_DEBUGPORT_PROTOCOL_GUID
   
   extern EFI_GUID  gEfiDebugPortDevicePathGuid;
   
   typedef struct {
     EFI_DEVICE_PATH_PROTOCOL  Header;
     EFI_GUID                  Guid;
   } DEBUGPORT_DEVICE_PATH;
   
   #endif

Cache object: e0e218abc6e6fbeeeceed7059f16dcc7