1 /*-
2 * Copyright (c) 2003-2007 Nate Lawson
3 * Copyright (c) 2000 Michael Smith
4 * Copyright (c) 2000 BSDi
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26 * SUCH DAMAGE.
27 */
28
29 #include <sys/cdefs.h>
30 __FBSDID("$FreeBSD$");
31
32 #include "opt_acpi.h"
33 #include <sys/param.h>
34 #include <sys/kernel.h>
35 #include <sys/bus.h>
36 #include <sys/lock.h>
37 #include <sys/malloc.h>
38 #include <sys/module.h>
39 #include <sys/sx.h>
40
41 #include <machine/bus.h>
42 #include <machine/resource.h>
43 #include <sys/rman.h>
44
45 #include <contrib/dev/acpica/include/acpi.h>
46 #include <contrib/dev/acpica/include/accommon.h>
47
48 #include <dev/acpica/acpivar.h>
49
50 /* Hooks for the ACPI CA debugging infrastructure */
51 #define _COMPONENT ACPI_EC
52 ACPI_MODULE_NAME("EC")
53
54 /*
55 * EC_COMMAND:
56 * -----------
57 */
58 typedef UINT8 EC_COMMAND;
59
60 #define EC_COMMAND_UNKNOWN ((EC_COMMAND) 0x00)
61 #define EC_COMMAND_READ ((EC_COMMAND) 0x80)
62 #define EC_COMMAND_WRITE ((EC_COMMAND) 0x81)
63 #define EC_COMMAND_BURST_ENABLE ((EC_COMMAND) 0x82)
64 #define EC_COMMAND_BURST_DISABLE ((EC_COMMAND) 0x83)
65 #define EC_COMMAND_QUERY ((EC_COMMAND) 0x84)
66
67 /*
68 * EC_STATUS:
69 * ----------
70 * The encoding of the EC status register is illustrated below.
71 * Note that a set bit (1) indicates the property is TRUE
72 * (e.g. if bit 0 is set then the output buffer is full).
73 * +-+-+-+-+-+-+-+-+
74 * |7|6|5|4|3|2|1|0|
75 * +-+-+-+-+-+-+-+-+
76 * | | | | | | | |
77 * | | | | | | | +- Output Buffer Full?
78 * | | | | | | +--- Input Buffer Full?
79 * | | | | | +----- <reserved>
80 * | | | | +------- Data Register is Command Byte?
81 * | | | +--------- Burst Mode Enabled?
82 * | | +----------- SCI Event?
83 * | +------------- SMI Event?
84 * +--------------- <reserved>
85 *
86 */
87 typedef UINT8 EC_STATUS;
88
89 #define EC_FLAG_OUTPUT_BUFFER ((EC_STATUS) 0x01)
90 #define EC_FLAG_INPUT_BUFFER ((EC_STATUS) 0x02)
91 #define EC_FLAG_DATA_IS_CMD ((EC_STATUS) 0x08)
92 #define EC_FLAG_BURST_MODE ((EC_STATUS) 0x10)
93
94 /*
95 * EC_EVENT:
96 * ---------
97 */
98 typedef UINT8 EC_EVENT;
99
100 #define EC_EVENT_UNKNOWN ((EC_EVENT) 0x00)
101 #define EC_EVENT_OUTPUT_BUFFER_FULL ((EC_EVENT) 0x01)
102 #define EC_EVENT_INPUT_BUFFER_EMPTY ((EC_EVENT) 0x02)
103 #define EC_EVENT_SCI ((EC_EVENT) 0x20)
104 #define EC_EVENT_SMI ((EC_EVENT) 0x40)
105
106 /* Data byte returned after burst enable indicating it was successful. */
107 #define EC_BURST_ACK 0x90
108
109 /*
110 * Register access primitives
111 */
112 #define EC_GET_DATA(sc) \
113 bus_space_read_1((sc)->ec_data_tag, (sc)->ec_data_handle, 0)
114
115 #define EC_SET_DATA(sc, v) \
116 bus_space_write_1((sc)->ec_data_tag, (sc)->ec_data_handle, 0, (v))
117
118 #define EC_GET_CSR(sc) \
119 bus_space_read_1((sc)->ec_csr_tag, (sc)->ec_csr_handle, 0)
120
121 #define EC_SET_CSR(sc, v) \
122 bus_space_write_1((sc)->ec_csr_tag, (sc)->ec_csr_handle, 0, (v))
123
124 /* Additional params to pass from the probe routine */
125 struct acpi_ec_params {
126 int glk;
127 int gpe_bit;
128 ACPI_HANDLE gpe_handle;
129 int uid;
130 };
131
132 /*
133 * Driver softc.
134 */
135 struct acpi_ec_softc {
136 device_t ec_dev;
137 ACPI_HANDLE ec_handle;
138 int ec_uid;
139 ACPI_HANDLE ec_gpehandle;
140 UINT8 ec_gpebit;
141
142 int ec_data_rid;
143 struct resource *ec_data_res;
144 bus_space_tag_t ec_data_tag;
145 bus_space_handle_t ec_data_handle;
146
147 int ec_csr_rid;
148 struct resource *ec_csr_res;
149 bus_space_tag_t ec_csr_tag;
150 bus_space_handle_t ec_csr_handle;
151
152 int ec_glk;
153 int ec_glkhandle;
154 int ec_burstactive;
155 int ec_sci_pend;
156 volatile u_int ec_gencount;
157 int ec_suspending;
158 };
159
160 /*
161 * XXX njl
162 * I couldn't find it in the spec but other implementations also use a
163 * value of 1 ms for the time to acquire global lock.
164 */
165 #define EC_LOCK_TIMEOUT 1000
166
167 /* Default delay in microseconds between each run of the status polling loop. */
168 #define EC_POLL_DELAY 50
169
170 /* Total time in ms spent waiting for a response from EC. */
171 #define EC_TIMEOUT 750
172
173 #define EVENT_READY(event, status) \
174 (((event) == EC_EVENT_OUTPUT_BUFFER_FULL && \
175 ((status) & EC_FLAG_OUTPUT_BUFFER) != 0) || \
176 ((event) == EC_EVENT_INPUT_BUFFER_EMPTY && \
177 ((status) & EC_FLAG_INPUT_BUFFER) == 0))
178
179 ACPI_SERIAL_DECL(ec, "ACPI embedded controller");
180
181 static SYSCTL_NODE(_debug_acpi, OID_AUTO, ec, CTLFLAG_RD, NULL, "EC debugging");
182
183 static int ec_burst_mode;
184 TUNABLE_INT("debug.acpi.ec.burst", &ec_burst_mode);
185 SYSCTL_INT(_debug_acpi_ec, OID_AUTO, burst, CTLFLAG_RW, &ec_burst_mode, 0,
186 "Enable use of burst mode (faster for nearly all systems)");
187 static int ec_polled_mode;
188 TUNABLE_INT("debug.acpi.ec.polled", &ec_polled_mode);
189 SYSCTL_INT(_debug_acpi_ec, OID_AUTO, polled, CTLFLAG_RW, &ec_polled_mode, 0,
190 "Force use of polled mode (only if interrupt mode doesn't work)");
191 static int ec_timeout = EC_TIMEOUT;
192 TUNABLE_INT("debug.acpi.ec.timeout", &ec_timeout);
193 SYSCTL_INT(_debug_acpi_ec, OID_AUTO, timeout, CTLFLAG_RW, &ec_timeout,
194 EC_TIMEOUT, "Total time spent waiting for a response (poll+sleep)");
195
196 static ACPI_STATUS
197 EcLock(struct acpi_ec_softc *sc)
198 {
199 ACPI_STATUS status;
200
201 /* If _GLK is non-zero, acquire the global lock. */
202 status = AE_OK;
203 if (sc->ec_glk) {
204 status = AcpiAcquireGlobalLock(EC_LOCK_TIMEOUT, &sc->ec_glkhandle);
205 if (ACPI_FAILURE(status))
206 return (status);
207 }
208 ACPI_SERIAL_BEGIN(ec);
209 return (status);
210 }
211
212 static void
213 EcUnlock(struct acpi_ec_softc *sc)
214 {
215 ACPI_SERIAL_END(ec);
216 if (sc->ec_glk)
217 AcpiReleaseGlobalLock(sc->ec_glkhandle);
218 }
219
220 static UINT32 EcGpeHandler(ACPI_HANDLE, UINT32, void *);
221 static ACPI_STATUS EcSpaceSetup(ACPI_HANDLE Region, UINT32 Function,
222 void *Context, void **return_Context);
223 static ACPI_STATUS EcSpaceHandler(UINT32 Function,
224 ACPI_PHYSICAL_ADDRESS Address,
225 UINT32 Width, UINT64 *Value,
226 void *Context, void *RegionContext);
227 static ACPI_STATUS EcWaitEvent(struct acpi_ec_softc *sc, EC_EVENT Event,
228 u_int gen_count);
229 static ACPI_STATUS EcCommand(struct acpi_ec_softc *sc, EC_COMMAND cmd);
230 static ACPI_STATUS EcRead(struct acpi_ec_softc *sc, UINT8 Address,
231 UINT8 *Data);
232 static ACPI_STATUS EcWrite(struct acpi_ec_softc *sc, UINT8 Address,
233 UINT8 Data);
234 static int acpi_ec_probe(device_t dev);
235 static int acpi_ec_attach(device_t dev);
236 static int acpi_ec_suspend(device_t dev);
237 static int acpi_ec_resume(device_t dev);
238 static int acpi_ec_shutdown(device_t dev);
239 static int acpi_ec_read_method(device_t dev, u_int addr,
240 UINT64 *val, int width);
241 static int acpi_ec_write_method(device_t dev, u_int addr,
242 UINT64 val, int width);
243
244 static device_method_t acpi_ec_methods[] = {
245 /* Device interface */
246 DEVMETHOD(device_probe, acpi_ec_probe),
247 DEVMETHOD(device_attach, acpi_ec_attach),
248 DEVMETHOD(device_suspend, acpi_ec_suspend),
249 DEVMETHOD(device_resume, acpi_ec_resume),
250 DEVMETHOD(device_shutdown, acpi_ec_shutdown),
251
252 /* Embedded controller interface */
253 DEVMETHOD(acpi_ec_read, acpi_ec_read_method),
254 DEVMETHOD(acpi_ec_write, acpi_ec_write_method),
255
256 {0, 0}
257 };
258
259 static driver_t acpi_ec_driver = {
260 "acpi_ec",
261 acpi_ec_methods,
262 sizeof(struct acpi_ec_softc),
263 };
264
265 static devclass_t acpi_ec_devclass;
266 DRIVER_MODULE(acpi_ec, acpi, acpi_ec_driver, acpi_ec_devclass, 0, 0);
267 MODULE_DEPEND(acpi_ec, acpi, 1, 1, 1);
268
269 /*
270 * Look for an ECDT and if we find one, set up default GPE and
271 * space handlers to catch attempts to access EC space before
272 * we have a real driver instance in place.
273 *
274 * TODO: Some old Gateway laptops need us to fake up an ECDT or
275 * otherwise attach early so that _REG methods can run.
276 */
277 void
278 acpi_ec_ecdt_probe(device_t parent)
279 {
280 ACPI_TABLE_ECDT *ecdt;
281 ACPI_STATUS status;
282 device_t child;
283 ACPI_HANDLE h;
284 struct acpi_ec_params *params;
285
286 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
287
288 /* Find and validate the ECDT. */
289 status = AcpiGetTable(ACPI_SIG_ECDT, 1, (ACPI_TABLE_HEADER **)&ecdt);
290 if (ACPI_FAILURE(status) ||
291 ecdt->Control.BitWidth != 8 ||
292 ecdt->Data.BitWidth != 8) {
293 return;
294 }
295
296 /* Create the child device with the given unit number. */
297 child = BUS_ADD_CHILD(parent, 3, "acpi_ec", ecdt->Uid);
298 if (child == NULL) {
299 printf("%s: can't add child\n", __func__);
300 return;
301 }
302
303 /* Find and save the ACPI handle for this device. */
304 status = AcpiGetHandle(NULL, ecdt->Id, &h);
305 if (ACPI_FAILURE(status)) {
306 device_delete_child(parent, child);
307 printf("%s: can't get handle\n", __func__);
308 return;
309 }
310 acpi_set_handle(child, h);
311
312 /* Set the data and CSR register addresses. */
313 bus_set_resource(child, SYS_RES_IOPORT, 0, ecdt->Data.Address,
314 /*count*/1);
315 bus_set_resource(child, SYS_RES_IOPORT, 1, ecdt->Control.Address,
316 /*count*/1);
317
318 /*
319 * Store values for the probe/attach routines to use. Store the
320 * ECDT GPE bit and set the global lock flag according to _GLK.
321 * Note that it is not perfectly correct to be evaluating a method
322 * before initializing devices, but in practice this function
323 * should be safe to call at this point.
324 */
325 params = malloc(sizeof(struct acpi_ec_params), M_TEMP, M_WAITOK | M_ZERO);
326 params->gpe_handle = NULL;
327 params->gpe_bit = ecdt->Gpe;
328 params->uid = ecdt->Uid;
329 acpi_GetInteger(h, "_GLK", ¶ms->glk);
330 acpi_set_private(child, params);
331
332 /* Finish the attach process. */
333 if (device_probe_and_attach(child) != 0)
334 device_delete_child(parent, child);
335 }
336
337 static int
338 acpi_ec_probe(device_t dev)
339 {
340 ACPI_BUFFER buf;
341 ACPI_HANDLE h;
342 ACPI_OBJECT *obj;
343 ACPI_STATUS status;
344 device_t peer;
345 char desc[64];
346 int ecdt;
347 int ret;
348 struct acpi_ec_params *params;
349 static char *ec_ids[] = { "PNP0C09", NULL };
350
351 /* Check that this is a device and that EC is not disabled. */
352 if (acpi_get_type(dev) != ACPI_TYPE_DEVICE || acpi_disabled("ec"))
353 return (ENXIO);
354
355 /*
356 * If probed via ECDT, set description and continue. Otherwise,
357 * we can access the namespace and make sure this is not a
358 * duplicate probe.
359 */
360 ret = ENXIO;
361 ecdt = 0;
362 buf.Pointer = NULL;
363 buf.Length = ACPI_ALLOCATE_BUFFER;
364 params = acpi_get_private(dev);
365 if (params != NULL) {
366 ecdt = 1;
367 ret = 0;
368 } else if (ACPI_ID_PROBE(device_get_parent(dev), dev, ec_ids)) {
369 params = malloc(sizeof(struct acpi_ec_params), M_TEMP,
370 M_WAITOK | M_ZERO);
371 h = acpi_get_handle(dev);
372
373 /*
374 * Read the unit ID to check for duplicate attach and the
375 * global lock value to see if we should acquire it when
376 * accessing the EC.
377 */
378 status = acpi_GetInteger(h, "_UID", ¶ms->uid);
379 if (ACPI_FAILURE(status))
380 params->uid = 0;
381 status = acpi_GetInteger(h, "_GLK", ¶ms->glk);
382 if (ACPI_FAILURE(status))
383 params->glk = 0;
384
385 /*
386 * Evaluate the _GPE method to find the GPE bit used by the EC to
387 * signal status (SCI). If it's a package, it contains a reference
388 * and GPE bit, similar to _PRW.
389 */
390 status = AcpiEvaluateObject(h, "_GPE", NULL, &buf);
391 if (ACPI_FAILURE(status)) {
392 device_printf(dev, "can't evaluate _GPE - %s\n",
393 AcpiFormatException(status));
394 goto out;
395 }
396 obj = (ACPI_OBJECT *)buf.Pointer;
397 if (obj == NULL)
398 goto out;
399
400 switch (obj->Type) {
401 case ACPI_TYPE_INTEGER:
402 params->gpe_handle = NULL;
403 params->gpe_bit = obj->Integer.Value;
404 break;
405 case ACPI_TYPE_PACKAGE:
406 if (!ACPI_PKG_VALID(obj, 2))
407 goto out;
408 params->gpe_handle =
409 acpi_GetReference(NULL, &obj->Package.Elements[0]);
410 if (params->gpe_handle == NULL ||
411 acpi_PkgInt32(obj, 1, ¶ms->gpe_bit) != 0)
412 goto out;
413 break;
414 default:
415 device_printf(dev, "_GPE has invalid type %d\n", obj->Type);
416 goto out;
417 }
418
419 /* Store the values we got from the namespace for attach. */
420 acpi_set_private(dev, params);
421
422 /*
423 * Check for a duplicate probe. This can happen when a probe
424 * via ECDT succeeded already. If this is a duplicate, disable
425 * this device.
426 */
427 peer = devclass_get_device(acpi_ec_devclass, params->uid);
428 if (peer == NULL || !device_is_alive(peer))
429 ret = 0;
430 else
431 device_disable(dev);
432 }
433
434 out:
435 if (ret == 0) {
436 snprintf(desc, sizeof(desc), "Embedded Controller: GPE %#x%s%s",
437 params->gpe_bit, (params->glk) ? ", GLK" : "",
438 ecdt ? ", ECDT" : "");
439 device_set_desc_copy(dev, desc);
440 }
441
442 if (ret > 0 && params)
443 free(params, M_TEMP);
444 if (buf.Pointer)
445 AcpiOsFree(buf.Pointer);
446 return (ret);
447 }
448
449 static int
450 acpi_ec_attach(device_t dev)
451 {
452 struct acpi_ec_softc *sc;
453 struct acpi_ec_params *params;
454 ACPI_STATUS Status;
455
456 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
457
458 /* Fetch/initialize softc (assumes softc is pre-zeroed). */
459 sc = device_get_softc(dev);
460 params = acpi_get_private(dev);
461 sc->ec_dev = dev;
462 sc->ec_handle = acpi_get_handle(dev);
463
464 /* Retrieve previously probed values via device ivars. */
465 sc->ec_glk = params->glk;
466 sc->ec_gpebit = params->gpe_bit;
467 sc->ec_gpehandle = params->gpe_handle;
468 sc->ec_uid = params->uid;
469 sc->ec_suspending = FALSE;
470 acpi_set_private(dev, NULL);
471 free(params, M_TEMP);
472
473 /* Attach bus resources for data and command/status ports. */
474 sc->ec_data_rid = 0;
475 sc->ec_data_res = bus_alloc_resource_any(sc->ec_dev, SYS_RES_IOPORT,
476 &sc->ec_data_rid, RF_ACTIVE);
477 if (sc->ec_data_res == NULL) {
478 device_printf(dev, "can't allocate data port\n");
479 goto error;
480 }
481 sc->ec_data_tag = rman_get_bustag(sc->ec_data_res);
482 sc->ec_data_handle = rman_get_bushandle(sc->ec_data_res);
483
484 sc->ec_csr_rid = 1;
485 sc->ec_csr_res = bus_alloc_resource_any(sc->ec_dev, SYS_RES_IOPORT,
486 &sc->ec_csr_rid, RF_ACTIVE);
487 if (sc->ec_csr_res == NULL) {
488 device_printf(dev, "can't allocate command/status port\n");
489 goto error;
490 }
491 sc->ec_csr_tag = rman_get_bustag(sc->ec_csr_res);
492 sc->ec_csr_handle = rman_get_bushandle(sc->ec_csr_res);
493
494 /*
495 * Install a handler for this EC's GPE bit. We want edge-triggered
496 * behavior.
497 */
498 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "attaching GPE handler\n"));
499 Status = AcpiInstallGpeHandler(sc->ec_gpehandle, sc->ec_gpebit,
500 ACPI_GPE_EDGE_TRIGGERED, EcGpeHandler, sc);
501 if (ACPI_FAILURE(Status)) {
502 device_printf(dev, "can't install GPE handler for %s - %s\n",
503 acpi_name(sc->ec_handle), AcpiFormatException(Status));
504 goto error;
505 }
506
507 /*
508 * Install address space handler
509 */
510 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "attaching address space handler\n"));
511 Status = AcpiInstallAddressSpaceHandler(sc->ec_handle, ACPI_ADR_SPACE_EC,
512 &EcSpaceHandler, &EcSpaceSetup, sc);
513 if (ACPI_FAILURE(Status)) {
514 device_printf(dev, "can't install address space handler for %s - %s\n",
515 acpi_name(sc->ec_handle), AcpiFormatException(Status));
516 goto error;
517 }
518
519 /* Enable runtime GPEs for the handler. */
520 Status = AcpiEnableGpe(sc->ec_gpehandle, sc->ec_gpebit);
521 if (ACPI_FAILURE(Status)) {
522 device_printf(dev, "AcpiEnableGpe failed: %s\n",
523 AcpiFormatException(Status));
524 goto error;
525 }
526
527 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "acpi_ec_attach complete\n"));
528 return (0);
529
530 error:
531 AcpiRemoveGpeHandler(sc->ec_gpehandle, sc->ec_gpebit, EcGpeHandler);
532 AcpiRemoveAddressSpaceHandler(sc->ec_handle, ACPI_ADR_SPACE_EC,
533 EcSpaceHandler);
534 if (sc->ec_csr_res)
535 bus_release_resource(sc->ec_dev, SYS_RES_IOPORT, sc->ec_csr_rid,
536 sc->ec_csr_res);
537 if (sc->ec_data_res)
538 bus_release_resource(sc->ec_dev, SYS_RES_IOPORT, sc->ec_data_rid,
539 sc->ec_data_res);
540 return (ENXIO);
541 }
542
543 static int
544 acpi_ec_suspend(device_t dev)
545 {
546 struct acpi_ec_softc *sc;
547
548 sc = device_get_softc(dev);
549 sc->ec_suspending = TRUE;
550 return (0);
551 }
552
553 static int
554 acpi_ec_resume(device_t dev)
555 {
556 struct acpi_ec_softc *sc;
557
558 sc = device_get_softc(dev);
559 sc->ec_suspending = FALSE;
560 return (0);
561 }
562
563 static int
564 acpi_ec_shutdown(device_t dev)
565 {
566 struct acpi_ec_softc *sc;
567
568 /* Disable the GPE so we don't get EC events during shutdown. */
569 sc = device_get_softc(dev);
570 AcpiDisableGpe(sc->ec_gpehandle, sc->ec_gpebit);
571 return (0);
572 }
573
574 /* Methods to allow other devices (e.g., smbat) to read/write EC space. */
575 static int
576 acpi_ec_read_method(device_t dev, u_int addr, UINT64 *val, int width)
577 {
578 struct acpi_ec_softc *sc;
579 ACPI_STATUS status;
580
581 sc = device_get_softc(dev);
582 status = EcSpaceHandler(ACPI_READ, addr, width * 8, val, sc, NULL);
583 if (ACPI_FAILURE(status))
584 return (ENXIO);
585 return (0);
586 }
587
588 static int
589 acpi_ec_write_method(device_t dev, u_int addr, UINT64 val, int width)
590 {
591 struct acpi_ec_softc *sc;
592 ACPI_STATUS status;
593
594 sc = device_get_softc(dev);
595 status = EcSpaceHandler(ACPI_WRITE, addr, width * 8, &val, sc, NULL);
596 if (ACPI_FAILURE(status))
597 return (ENXIO);
598 return (0);
599 }
600
601 static ACPI_STATUS
602 EcCheckStatus(struct acpi_ec_softc *sc, const char *msg, EC_EVENT event)
603 {
604 ACPI_STATUS status;
605 EC_STATUS ec_status;
606
607 status = AE_NO_HARDWARE_RESPONSE;
608 ec_status = EC_GET_CSR(sc);
609 if (sc->ec_burstactive && !(ec_status & EC_FLAG_BURST_MODE)) {
610 CTR1(KTR_ACPI, "ec burst disabled in waitevent (%s)", msg);
611 sc->ec_burstactive = FALSE;
612 }
613 if (EVENT_READY(event, ec_status)) {
614 CTR2(KTR_ACPI, "ec %s wait ready, status %#x", msg, ec_status);
615 status = AE_OK;
616 }
617 return (status);
618 }
619
620 static void
621 EcGpeQueryHandlerSub(struct acpi_ec_softc *sc)
622 {
623 UINT8 Data;
624 ACPI_STATUS Status;
625 int retry;
626 char qxx[5];
627
628 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
629
630 /* Serialize user access with EcSpaceHandler(). */
631 Status = EcLock(sc);
632 if (ACPI_FAILURE(Status)) {
633 device_printf(sc->ec_dev, "GpeQuery lock error: %s\n",
634 AcpiFormatException(Status));
635 return;
636 }
637
638 /*
639 * Send a query command to the EC to find out which _Qxx call it
640 * wants to make. This command clears the SCI bit and also the
641 * interrupt source since we are edge-triggered. To prevent the GPE
642 * that may arise from running the query from causing another query
643 * to be queued, we clear the pending flag only after running it.
644 */
645 for (retry = 0; retry < 2; retry++) {
646 Status = EcCommand(sc, EC_COMMAND_QUERY);
647 if (ACPI_SUCCESS(Status))
648 break;
649 if (EcCheckStatus(sc, "retr_check",
650 EC_EVENT_INPUT_BUFFER_EMPTY) == AE_OK)
651 continue;
652 else
653 break;
654 }
655 if (ACPI_FAILURE(Status)) {
656 EcUnlock(sc);
657 device_printf(sc->ec_dev, "GPE query failed: %s\n",
658 AcpiFormatException(Status));
659 return;
660 }
661 Data = EC_GET_DATA(sc);
662
663 /*
664 * We have to unlock before running the _Qxx method below since that
665 * method may attempt to read/write from EC address space, causing
666 * recursive acquisition of the lock.
667 */
668 EcUnlock(sc);
669
670 /* Ignore the value for "no outstanding event". (13.3.5) */
671 CTR2(KTR_ACPI, "ec query ok,%s running _Q%02X", Data ? "" : " not", Data);
672 if (Data == 0)
673 return;
674
675 /* Evaluate _Qxx to respond to the controller. */
676 snprintf(qxx, sizeof(qxx), "_Q%02X", Data);
677 AcpiUtStrupr(qxx);
678 Status = AcpiEvaluateObject(sc->ec_handle, qxx, NULL, NULL);
679 if (ACPI_FAILURE(Status) && Status != AE_NOT_FOUND) {
680 device_printf(sc->ec_dev, "evaluation of query method %s failed: %s\n",
681 qxx, AcpiFormatException(Status));
682 }
683 }
684
685 static void
686 EcGpeQueryHandler(void *Context)
687 {
688 struct acpi_ec_softc *sc = (struct acpi_ec_softc *)Context;
689 int pending;
690
691 KASSERT(Context != NULL, ("EcGpeQueryHandler called with NULL"));
692
693 do {
694 /* Read the current pending count */
695 pending = atomic_load_acq_int(&sc->ec_sci_pend);
696
697 /* Call GPE handler function */
698 EcGpeQueryHandlerSub(sc);
699
700 /*
701 * Try to reset the pending count to zero. If this fails we
702 * know another GPE event has occurred while handling the
703 * current GPE event and need to loop.
704 */
705 } while (!atomic_cmpset_int(&sc->ec_sci_pend, pending, 0));
706 }
707
708 /*
709 * The GPE handler is called when IBE/OBF or SCI events occur. We are
710 * called from an unknown lock context.
711 */
712 static UINT32
713 EcGpeHandler(ACPI_HANDLE GpeDevice, UINT32 GpeNumber, void *Context)
714 {
715 struct acpi_ec_softc *sc = Context;
716 ACPI_STATUS Status;
717 EC_STATUS EcStatus;
718
719 KASSERT(Context != NULL, ("EcGpeHandler called with NULL"));
720 CTR0(KTR_ACPI, "ec gpe handler start");
721
722 /*
723 * Notify EcWaitEvent() that the status register is now fresh. If we
724 * didn't do this, it wouldn't be possible to distinguish an old IBE
725 * from a new one, for example when doing a write transaction (writing
726 * address and then data values.)
727 */
728 atomic_add_int(&sc->ec_gencount, 1);
729 wakeup(sc);
730
731 /*
732 * If the EC_SCI bit of the status register is set, queue a query handler.
733 * It will run the query and _Qxx method later, under the lock.
734 */
735 EcStatus = EC_GET_CSR(sc);
736 if ((EcStatus & EC_EVENT_SCI) &&
737 atomic_fetchadd_int(&sc->ec_sci_pend, 1) == 0) {
738 CTR0(KTR_ACPI, "ec gpe queueing query handler");
739 Status = AcpiOsExecute(OSL_GPE_HANDLER, EcGpeQueryHandler, Context);
740 if (ACPI_FAILURE(Status)) {
741 printf("EcGpeHandler: queuing GPE query handler failed\n");
742 atomic_store_rel_int(&sc->ec_sci_pend, 0);
743 }
744 }
745 return (ACPI_REENABLE_GPE);
746 }
747
748 static ACPI_STATUS
749 EcSpaceSetup(ACPI_HANDLE Region, UINT32 Function, void *Context,
750 void **RegionContext)
751 {
752
753 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
754
755 /*
756 * If deactivating a region, always set the output to NULL. Otherwise,
757 * just pass the context through.
758 */
759 if (Function == ACPI_REGION_DEACTIVATE)
760 *RegionContext = NULL;
761 else
762 *RegionContext = Context;
763
764 return_ACPI_STATUS (AE_OK);
765 }
766
767 static ACPI_STATUS
768 EcSpaceHandler(UINT32 Function, ACPI_PHYSICAL_ADDRESS Address, UINT32 Width,
769 UINT64 *Value, void *Context, void *RegionContext)
770 {
771 struct acpi_ec_softc *sc = (struct acpi_ec_softc *)Context;
772 ACPI_PHYSICAL_ADDRESS EcAddr;
773 UINT8 *EcData;
774 ACPI_STATUS Status;
775
776 ACPI_FUNCTION_TRACE_U32((char *)(uintptr_t)__func__, (UINT32)Address);
777
778 if (Function != ACPI_READ && Function != ACPI_WRITE)
779 return_ACPI_STATUS (AE_BAD_PARAMETER);
780 if (Width % 8 != 0 || Value == NULL || Context == NULL)
781 return_ACPI_STATUS (AE_BAD_PARAMETER);
782 if (Address + Width / 8 > 256)
783 return_ACPI_STATUS (AE_BAD_ADDRESS);
784
785 /*
786 * If booting, check if we need to run the query handler. If so, we
787 * we call it directly here since our thread taskq is not active yet.
788 */
789 if (cold || rebooting || sc->ec_suspending) {
790 if ((EC_GET_CSR(sc) & EC_EVENT_SCI) &&
791 atomic_fetchadd_int(&sc->ec_sci_pend, 1) == 0) {
792 CTR0(KTR_ACPI, "ec running gpe handler directly");
793 EcGpeQueryHandler(sc);
794 }
795 }
796
797 /* Serialize with EcGpeQueryHandler() at transaction granularity. */
798 Status = EcLock(sc);
799 if (ACPI_FAILURE(Status))
800 return_ACPI_STATUS (Status);
801
802 /* If we can't start burst mode, continue anyway. */
803 Status = EcCommand(sc, EC_COMMAND_BURST_ENABLE);
804 if (ACPI_SUCCESS(Status)) {
805 if (EC_GET_DATA(sc) == EC_BURST_ACK) {
806 CTR0(KTR_ACPI, "ec burst enabled");
807 sc->ec_burstactive = TRUE;
808 }
809 }
810
811 /* Perform the transaction(s), based on Width. */
812 EcAddr = Address;
813 EcData = (UINT8 *)Value;
814 if (Function == ACPI_READ)
815 *Value = 0;
816 do {
817 switch (Function) {
818 case ACPI_READ:
819 Status = EcRead(sc, EcAddr, EcData);
820 break;
821 case ACPI_WRITE:
822 Status = EcWrite(sc, EcAddr, *EcData);
823 break;
824 }
825 if (ACPI_FAILURE(Status))
826 break;
827 EcAddr++;
828 EcData++;
829 } while (EcAddr < Address + Width / 8);
830
831 if (sc->ec_burstactive) {
832 sc->ec_burstactive = FALSE;
833 if (ACPI_SUCCESS(EcCommand(sc, EC_COMMAND_BURST_DISABLE)))
834 CTR0(KTR_ACPI, "ec disabled burst ok");
835 }
836
837 EcUnlock(sc);
838 return_ACPI_STATUS (Status);
839 }
840
841 static ACPI_STATUS
842 EcWaitEvent(struct acpi_ec_softc *sc, EC_EVENT Event, u_int gen_count)
843 {
844 static int no_intr = 0;
845 ACPI_STATUS Status;
846 int count, i, need_poll, slp_ival;
847
848 ACPI_SERIAL_ASSERT(ec);
849 Status = AE_NO_HARDWARE_RESPONSE;
850 need_poll = cold || rebooting || ec_polled_mode || sc->ec_suspending;
851
852 /* Wait for event by polling or GPE (interrupt). */
853 if (need_poll) {
854 count = (ec_timeout * 1000) / EC_POLL_DELAY;
855 if (count == 0)
856 count = 1;
857 DELAY(10);
858 for (i = 0; i < count; i++) {
859 Status = EcCheckStatus(sc, "poll", Event);
860 if (Status == AE_OK)
861 break;
862 DELAY(EC_POLL_DELAY);
863 }
864 } else {
865 slp_ival = hz / 1000;
866 if (slp_ival != 0) {
867 count = ec_timeout;
868 } else {
869 /* hz has less than 1 ms resolution so scale timeout. */
870 slp_ival = 1;
871 count = ec_timeout / (1000 / hz);
872 }
873
874 /*
875 * Wait for the GPE to signal the status changed, checking the
876 * status register each time we get one. It's possible to get a
877 * GPE for an event we're not interested in here (i.e., SCI for
878 * EC query).
879 */
880 for (i = 0; i < count; i++) {
881 if (gen_count == sc->ec_gencount)
882 tsleep(sc, 0, "ecgpe", slp_ival);
883 /*
884 * Record new generation count. It's possible the GPE was
885 * just to notify us that a query is needed and we need to
886 * wait for a second GPE to signal the completion of the
887 * event we are actually waiting for.
888 */
889 Status = EcCheckStatus(sc, "sleep", Event);
890 if (Status == AE_OK) {
891 if (gen_count == sc->ec_gencount)
892 no_intr++;
893 else
894 no_intr = 0;
895 break;
896 }
897 gen_count = sc->ec_gencount;
898 }
899
900 /*
901 * We finished waiting for the GPE and it never arrived. Try to
902 * read the register once and trust whatever value we got. This is
903 * the best we can do at this point.
904 */
905 if (Status != AE_OK)
906 Status = EcCheckStatus(sc, "sleep_end", Event);
907 }
908 if (!need_poll && no_intr > 10) {
909 device_printf(sc->ec_dev,
910 "not getting interrupts, switched to polled mode\n");
911 ec_polled_mode = 1;
912 }
913 if (Status != AE_OK)
914 CTR0(KTR_ACPI, "error: ec wait timed out");
915 return (Status);
916 }
917
918 static ACPI_STATUS
919 EcCommand(struct acpi_ec_softc *sc, EC_COMMAND cmd)
920 {
921 ACPI_STATUS status;
922 EC_EVENT event;
923 EC_STATUS ec_status;
924 u_int gen_count;
925
926 ACPI_SERIAL_ASSERT(ec);
927
928 /* Don't use burst mode if user disabled it. */
929 if (!ec_burst_mode && cmd == EC_COMMAND_BURST_ENABLE)
930 return (AE_ERROR);
931
932 /* Decide what to wait for based on command type. */
933 switch (cmd) {
934 case EC_COMMAND_READ:
935 case EC_COMMAND_WRITE:
936 case EC_COMMAND_BURST_DISABLE:
937 event = EC_EVENT_INPUT_BUFFER_EMPTY;
938 break;
939 case EC_COMMAND_QUERY:
940 case EC_COMMAND_BURST_ENABLE:
941 event = EC_EVENT_OUTPUT_BUFFER_FULL;
942 break;
943 default:
944 device_printf(sc->ec_dev, "EcCommand: invalid command %#x\n", cmd);
945 return (AE_BAD_PARAMETER);
946 }
947
948 /*
949 * Ensure empty input buffer before issuing command.
950 * Use generation count of zero to force a quick check.
951 */
952 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, 0);
953 if (ACPI_FAILURE(status))
954 return (status);
955
956 /* Run the command and wait for the chosen event. */
957 CTR1(KTR_ACPI, "ec running command %#x", cmd);
958 gen_count = sc->ec_gencount;
959 EC_SET_CSR(sc, cmd);
960 status = EcWaitEvent(sc, event, gen_count);
961 if (ACPI_SUCCESS(status)) {
962 /* If we succeeded, burst flag should now be present. */
963 if (cmd == EC_COMMAND_BURST_ENABLE) {
964 ec_status = EC_GET_CSR(sc);
965 if ((ec_status & EC_FLAG_BURST_MODE) == 0)
966 status = AE_ERROR;
967 }
968 } else
969 device_printf(sc->ec_dev, "EcCommand: no response to %#x\n", cmd);
970 return (status);
971 }
972
973 static ACPI_STATUS
974 EcRead(struct acpi_ec_softc *sc, UINT8 Address, UINT8 *Data)
975 {
976 ACPI_STATUS status;
977 u_int gen_count;
978 int retry;
979
980 ACPI_SERIAL_ASSERT(ec);
981 CTR1(KTR_ACPI, "ec read from %#x", Address);
982
983 for (retry = 0; retry < 2; retry++) {
984 status = EcCommand(sc, EC_COMMAND_READ);
985 if (ACPI_FAILURE(status))
986 return (status);
987
988 gen_count = sc->ec_gencount;
989 EC_SET_DATA(sc, Address);
990 status = EcWaitEvent(sc, EC_EVENT_OUTPUT_BUFFER_FULL, gen_count);
991 if (ACPI_FAILURE(status)) {
992 if (EcCheckStatus(sc, "retr_check",
993 EC_EVENT_INPUT_BUFFER_EMPTY) == AE_OK)
994 continue;
995 else
996 break;
997 }
998 *Data = EC_GET_DATA(sc);
999 return (AE_OK);
1000 }
1001 device_printf(sc->ec_dev, "EcRead: failed waiting to get data\n");
1002 return (status);
1003 }
1004
1005 static ACPI_STATUS
1006 EcWrite(struct acpi_ec_softc *sc, UINT8 Address, UINT8 Data)
1007 {
1008 ACPI_STATUS status;
1009 u_int gen_count;
1010
1011 ACPI_SERIAL_ASSERT(ec);
1012 CTR2(KTR_ACPI, "ec write to %#x, data %#x", Address, Data);
1013
1014 status = EcCommand(sc, EC_COMMAND_WRITE);
1015 if (ACPI_FAILURE(status))
1016 return (status);
1017
1018 gen_count = sc->ec_gencount;
1019 EC_SET_DATA(sc, Address);
1020 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, gen_count);
1021 if (ACPI_FAILURE(status)) {
1022 device_printf(sc->ec_dev, "EcWrite: failed waiting for sent address\n");
1023 return (status);
1024 }
1025
1026 gen_count = sc->ec_gencount;
1027 EC_SET_DATA(sc, Data);
1028 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, gen_count);
1029 if (ACPI_FAILURE(status)) {
1030 device_printf(sc->ec_dev, "EcWrite: failed waiting for sent data\n");
1031 return (status);
1032 }
1033
1034 return (AE_OK);
1035 }
Cache object: fc87c08cb4881f785fed652763a0a3ca
|