1 /*-
2 * Copyright (c) 1997, Stefan Esser <se@freebsd.org>
3 * Copyright (c) 2000, Michael Smith <msmith@freebsd.org>
4 * Copyright (c) 2000, BSDi
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice unmodified, this list of conditions, and the following
12 * disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29 #include <sys/cdefs.h>
30 __FBSDID("$FreeBSD$");
31
32 #include <sys/param.h>
33 #include <sys/systm.h>
34 #include <sys/bus.h>
35 #include <sys/kernel.h>
36 #include <sys/malloc.h>
37 #include <sys/module.h>
38
39 #include <contrib/dev/acpica/include/acpi.h>
40 #include <contrib/dev/acpica/include/accommon.h>
41
42 #include <dev/acpica/acpivar.h>
43
44 #include <sys/pciio.h>
45 #include <dev/pci/pcireg.h>
46 #include <dev/pci/pcivar.h>
47 #include <dev/pci/pci_private.h>
48
49 #include "pcib_if.h"
50 #include "pci_if.h"
51
52 /* Hooks for the ACPI CA debugging infrastructure. */
53 #define _COMPONENT ACPI_BUS
54 ACPI_MODULE_NAME("PCI")
55
56 struct acpi_pci_devinfo {
57 struct pci_devinfo ap_dinfo;
58 ACPI_HANDLE ap_handle;
59 int ap_flags;
60 };
61
62 ACPI_SERIAL_DECL(pci_powerstate, "ACPI PCI power methods");
63
64 /* Be sure that ACPI and PCI power states are equivalent. */
65 CTASSERT(ACPI_STATE_D0 == PCI_POWERSTATE_D0);
66 CTASSERT(ACPI_STATE_D1 == PCI_POWERSTATE_D1);
67 CTASSERT(ACPI_STATE_D2 == PCI_POWERSTATE_D2);
68 CTASSERT(ACPI_STATE_D3 == PCI_POWERSTATE_D3);
69
70 static int acpi_pci_attach(device_t dev);
71 static int acpi_pci_child_location_str_method(device_t cbdev,
72 device_t child, char *buf, size_t buflen);
73 static int acpi_pci_probe(device_t dev);
74 static int acpi_pci_read_ivar(device_t dev, device_t child, int which,
75 uintptr_t *result);
76 static int acpi_pci_write_ivar(device_t dev, device_t child, int which,
77 uintptr_t value);
78 static ACPI_STATUS acpi_pci_save_handle(ACPI_HANDLE handle, UINT32 level,
79 void *context, void **status);
80 static int acpi_pci_set_powerstate_method(device_t dev, device_t child,
81 int state);
82 static void acpi_pci_update_device(ACPI_HANDLE handle, device_t pci_child);
83
84 static device_method_t acpi_pci_methods[] = {
85 /* Device interface */
86 DEVMETHOD(device_probe, acpi_pci_probe),
87 DEVMETHOD(device_attach, acpi_pci_attach),
88
89 /* Bus interface */
90 DEVMETHOD(bus_read_ivar, acpi_pci_read_ivar),
91 DEVMETHOD(bus_write_ivar, acpi_pci_write_ivar),
92 DEVMETHOD(bus_child_location_str, acpi_pci_child_location_str_method),
93
94 /* PCI interface */
95 DEVMETHOD(pci_set_powerstate, acpi_pci_set_powerstate_method),
96
97 { 0, 0 }
98 };
99
100 static devclass_t pci_devclass;
101
102 DEFINE_CLASS_1(pci, acpi_pci_driver, acpi_pci_methods, sizeof(struct pci_softc),
103 pci_driver);
104 DRIVER_MODULE(acpi_pci, pcib, acpi_pci_driver, pci_devclass, 0, 0);
105 MODULE_DEPEND(acpi_pci, acpi, 1, 1, 1);
106 MODULE_DEPEND(acpi_pci, pci, 1, 1, 1);
107 MODULE_VERSION(acpi_pci, 1);
108
109 static int
110 acpi_pci_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
111 {
112 struct acpi_pci_devinfo *dinfo;
113
114 dinfo = device_get_ivars(child);
115 switch (which) {
116 case ACPI_IVAR_HANDLE:
117 *result = (uintptr_t)dinfo->ap_handle;
118 return (0);
119 case ACPI_IVAR_FLAGS:
120 *result = (uintptr_t)dinfo->ap_flags;
121 return (0);
122 }
123 return (pci_read_ivar(dev, child, which, result));
124 }
125
126 static int
127 acpi_pci_write_ivar(device_t dev, device_t child, int which, uintptr_t value)
128 {
129 struct acpi_pci_devinfo *dinfo;
130
131 dinfo = device_get_ivars(child);
132 switch (which) {
133 case ACPI_IVAR_HANDLE:
134 dinfo->ap_handle = (ACPI_HANDLE)value;
135 return (0);
136 case ACPI_IVAR_FLAGS:
137 dinfo->ap_flags = (int)value;
138 return (0);
139 }
140 return (pci_write_ivar(dev, child, which, value));
141 }
142
143 static int
144 acpi_pci_child_location_str_method(device_t cbdev, device_t child, char *buf,
145 size_t buflen)
146 {
147 struct acpi_pci_devinfo *dinfo = device_get_ivars(child);
148
149 pci_child_location_str_method(cbdev, child, buf, buflen);
150
151 if (dinfo->ap_handle) {
152 strlcat(buf, " handle=", buflen);
153 strlcat(buf, acpi_name(dinfo->ap_handle), buflen);
154 }
155 return (0);
156 }
157
158 /*
159 * PCI power manangement
160 */
161 static int
162 acpi_pci_set_powerstate_method(device_t dev, device_t child, int state)
163 {
164 ACPI_HANDLE h;
165 ACPI_STATUS status;
166 int old_state, error;
167
168 error = 0;
169 if (state < ACPI_STATE_D0 || state > ACPI_STATE_D3)
170 return (EINVAL);
171
172 /*
173 * We set the state using PCI Power Management outside of setting
174 * the ACPI state. This means that when powering down a device, we
175 * first shut it down using PCI, and then using ACPI, which lets ACPI
176 * try to power down any Power Resources that are now no longer used.
177 * When powering up a device, we let ACPI set the state first so that
178 * it can enable any needed Power Resources before changing the PCI
179 * power state.
180 */
181 ACPI_SERIAL_BEGIN(pci_powerstate);
182 old_state = pci_get_powerstate(child);
183 if (old_state < state) {
184 error = pci_set_powerstate_method(dev, child, state);
185 if (error)
186 goto out;
187 }
188 h = acpi_get_handle(child);
189 status = acpi_pwr_switch_consumer(h, state);
190 if (ACPI_FAILURE(status) && status != AE_NOT_FOUND)
191 device_printf(dev,
192 "Failed to set ACPI power state D%d on %s: %s\n",
193 state, acpi_name(h), AcpiFormatException(status));
194 if (old_state > state)
195 error = pci_set_powerstate_method(dev, child, state);
196
197 out:
198 ACPI_SERIAL_END(pci_powerstate);
199 return (error);
200 }
201
202 static void
203 acpi_pci_update_device(ACPI_HANDLE handle, device_t pci_child)
204 {
205 ACPI_STATUS status;
206 device_t child;
207
208 /*
209 * Lookup and remove the unused device that acpi0 creates when it walks
210 * the namespace creating devices.
211 */
212 child = acpi_get_device(handle);
213 if (child != NULL) {
214 if (device_is_alive(child)) {
215 /*
216 * The TabletPC TC1000 has a second PCI-ISA bridge
217 * that has a _HID for an acpi_sysresource device.
218 * In that case, leave ACPI-CA's device data pointing
219 * at the ACPI-enumerated device.
220 */
221 device_printf(child,
222 "Conflicts with PCI device %d:%d:%d\n",
223 pci_get_bus(pci_child), pci_get_slot(pci_child),
224 pci_get_function(pci_child));
225 return;
226 }
227 KASSERT(device_get_parent(child) ==
228 devclass_get_device(devclass_find("acpi"), 0),
229 ("%s: child (%s)'s parent is not acpi0", __func__,
230 acpi_name(handle)));
231 device_delete_child(device_get_parent(child), child);
232 }
233
234 /*
235 * Update ACPI-CA to use the PCI enumerated device_t for this handle.
236 */
237 status = AcpiDetachData(handle, acpi_fake_objhandler);
238 if (ACPI_FAILURE(status))
239 printf("WARNING: Unable to detach object data from %s - %s\n",
240 acpi_name(handle), AcpiFormatException(status));
241 status = AcpiAttachData(handle, acpi_fake_objhandler, pci_child);
242 if (ACPI_FAILURE(status))
243 printf("WARNING: Unable to attach object data to %s - %s\n",
244 acpi_name(handle), AcpiFormatException(status));
245 }
246
247 static ACPI_STATUS
248 acpi_pci_save_handle(ACPI_HANDLE handle, UINT32 level, void *context,
249 void **status)
250 {
251 struct acpi_pci_devinfo *dinfo;
252 device_t *devlist;
253 int devcount, i, func, slot;
254 UINT32 address;
255
256 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
257
258 if (ACPI_FAILURE(acpi_GetInteger(handle, "_ADR", &address)))
259 return_ACPI_STATUS (AE_OK);
260 slot = ACPI_ADR_PCI_SLOT(address);
261 func = ACPI_ADR_PCI_FUNC(address);
262 if (device_get_children((device_t)context, &devlist, &devcount) != 0)
263 return_ACPI_STATUS (AE_OK);
264 for (i = 0; i < devcount; i++) {
265 dinfo = device_get_ivars(devlist[i]);
266 if (dinfo->ap_dinfo.cfg.func == func &&
267 dinfo->ap_dinfo.cfg.slot == slot) {
268 dinfo->ap_handle = handle;
269 acpi_pci_update_device(handle, devlist[i]);
270 break;
271 }
272 }
273 free(devlist, M_TEMP);
274 return_ACPI_STATUS (AE_OK);
275 }
276
277 static int
278 acpi_pci_probe(device_t dev)
279 {
280
281 if (pcib_get_bus(dev) < 0)
282 return (ENXIO);
283 if (acpi_get_handle(dev) == NULL)
284 return (ENXIO);
285 device_set_desc(dev, "ACPI PCI bus");
286 return (0);
287 }
288
289 static int
290 acpi_pci_attach(device_t dev)
291 {
292 int busno, domain, error;
293
294 error = pci_attach_common(dev);
295 if (error)
296 return (error);
297
298 /*
299 * Since there can be multiple independantly numbered PCI
300 * busses on systems with multiple PCI domains, we can't use
301 * the unit number to decide which bus we are probing. We ask
302 * the parent pcib what our domain and bus numbers are.
303 */
304 domain = pcib_get_domain(dev);
305 busno = pcib_get_bus(dev);
306
307 /*
308 * First, PCI devices are added as in the normal PCI bus driver.
309 * Afterwards, the ACPI namespace under the bridge driver is
310 * walked to save ACPI handles to all the devices that appear in
311 * the ACPI namespace as immediate descendants of the bridge.
312 *
313 * XXX: Sometimes PCI devices show up in the ACPI namespace that
314 * pci_add_children() doesn't find. We currently just ignore
315 * these devices.
316 */
317 pci_add_children(dev, domain, busno, sizeof(struct acpi_pci_devinfo));
318 AcpiWalkNamespace(ACPI_TYPE_DEVICE, acpi_get_handle(dev), 1,
319 acpi_pci_save_handle, NULL, dev, NULL);
320
321 return (bus_generic_attach(dev));
322 }
Cache object: 4f02c30cae0749e69a5ddfa426d70825
|