1 /*-
2 * Copyright (c) 2000, 2001 Michael Smith
3 * Copyright (c) 2000 BSDi
4 * All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 * SUCH DAMAGE.
26 */
27
28 #include <sys/cdefs.h>
29 __FBSDID("$FreeBSD: releng/10.4/sys/dev/acpica/acpi_thermal.c 255077 2013-08-30 19:21:12Z dumbbell $");
30
31 #include "opt_acpi.h"
32 #include <sys/param.h>
33 #include <sys/kernel.h>
34 #include <sys/bus.h>
35 #include <sys/cpu.h>
36 #include <sys/kthread.h>
37 #include <sys/malloc.h>
38 #include <sys/module.h>
39 #include <sys/proc.h>
40 #include <sys/reboot.h>
41 #include <sys/sysctl.h>
42 #include <sys/unistd.h>
43 #include <sys/power.h>
44
45 #include "cpufreq_if.h"
46
47 #include <contrib/dev/acpica/include/acpi.h>
48 #include <contrib/dev/acpica/include/accommon.h>
49
50 #include <dev/acpica/acpivar.h>
51
52 /* Hooks for the ACPI CA debugging infrastructure */
53 #define _COMPONENT ACPI_THERMAL
54 ACPI_MODULE_NAME("THERMAL")
55
56 #define TZ_ZEROC 2732
57 #define TZ_KELVTOC(x) (((x) - TZ_ZEROC) / 10), abs(((x) - TZ_ZEROC) % 10)
58
59 #define TZ_NOTIFY_TEMPERATURE 0x80 /* Temperature changed. */
60 #define TZ_NOTIFY_LEVELS 0x81 /* Cooling levels changed. */
61 #define TZ_NOTIFY_DEVICES 0x82 /* Device lists changed. */
62 #define TZ_NOTIFY_CRITICAL 0xcc /* Fake notify that _CRT/_HOT reached. */
63
64 /* Check for temperature changes every 10 seconds by default */
65 #define TZ_POLLRATE 10
66
67 /* Make sure the reported temperature is valid for this number of polls. */
68 #define TZ_VALIDCHECKS 3
69
70 /* Notify the user we will be shutting down in one more poll cycle. */
71 #define TZ_NOTIFYCOUNT (TZ_VALIDCHECKS - 1)
72
73 /* ACPI spec defines this */
74 #define TZ_NUMLEVELS 10
75 struct acpi_tz_zone {
76 int ac[TZ_NUMLEVELS];
77 ACPI_BUFFER al[TZ_NUMLEVELS];
78 int crt;
79 int hot;
80 ACPI_BUFFER psl;
81 int psv;
82 int tc1;
83 int tc2;
84 int tsp;
85 int tzp;
86 };
87
88 struct acpi_tz_softc {
89 device_t tz_dev;
90 ACPI_HANDLE tz_handle; /*Thermal zone handle*/
91 int tz_temperature; /*Current temperature*/
92 int tz_active; /*Current active cooling*/
93 #define TZ_ACTIVE_NONE -1
94 #define TZ_ACTIVE_UNKNOWN -2
95 int tz_requested; /*Minimum active cooling*/
96 int tz_thflags; /*Current temp-related flags*/
97 #define TZ_THFLAG_NONE 0
98 #define TZ_THFLAG_PSV (1<<0)
99 #define TZ_THFLAG_HOT (1<<2)
100 #define TZ_THFLAG_CRT (1<<3)
101 int tz_flags;
102 #define TZ_FLAG_NO_SCP (1<<0) /*No _SCP method*/
103 #define TZ_FLAG_GETPROFILE (1<<1) /*Get power_profile in timeout*/
104 #define TZ_FLAG_GETSETTINGS (1<<2) /*Get devs/setpoints*/
105 struct timespec tz_cooling_started;
106 /*Current cooling starting time*/
107
108 struct sysctl_ctx_list tz_sysctl_ctx;
109 struct sysctl_oid *tz_sysctl_tree;
110 eventhandler_tag tz_event;
111
112 struct acpi_tz_zone tz_zone; /*Thermal zone parameters*/
113 int tz_validchecks;
114 int tz_insane_tmp_notified;
115
116 /* passive cooling */
117 struct proc *tz_cooling_proc;
118 int tz_cooling_proc_running;
119 int tz_cooling_enabled;
120 int tz_cooling_active;
121 int tz_cooling_updated;
122 int tz_cooling_saved_freq;
123 };
124
125 #define TZ_ACTIVE_LEVEL(act) ((act) >= 0 ? (act) : TZ_NUMLEVELS)
126
127 #define CPUFREQ_MAX_LEVELS 64 /* XXX cpufreq should export this */
128
129 static int acpi_tz_probe(device_t dev);
130 static int acpi_tz_attach(device_t dev);
131 static int acpi_tz_establish(struct acpi_tz_softc *sc);
132 static void acpi_tz_monitor(void *Context);
133 static void acpi_tz_switch_cooler_off(ACPI_OBJECT *obj, void *arg);
134 static void acpi_tz_switch_cooler_on(ACPI_OBJECT *obj, void *arg);
135 static void acpi_tz_getparam(struct acpi_tz_softc *sc, char *node,
136 int *data);
137 static void acpi_tz_sanity(struct acpi_tz_softc *sc, int *val, char *what);
138 static int acpi_tz_active_sysctl(SYSCTL_HANDLER_ARGS);
139 static int acpi_tz_cooling_sysctl(SYSCTL_HANDLER_ARGS);
140 static int acpi_tz_temp_sysctl(SYSCTL_HANDLER_ARGS);
141 static int acpi_tz_passive_sysctl(SYSCTL_HANDLER_ARGS);
142 static void acpi_tz_notify_handler(ACPI_HANDLE h, UINT32 notify,
143 void *context);
144 static void acpi_tz_signal(struct acpi_tz_softc *sc, int flags);
145 static void acpi_tz_timeout(struct acpi_tz_softc *sc, int flags);
146 static void acpi_tz_power_profile(void *arg);
147 static void acpi_tz_thread(void *arg);
148 static int acpi_tz_cooling_is_available(struct acpi_tz_softc *sc);
149 static int acpi_tz_cooling_thread_start(struct acpi_tz_softc *sc);
150
151 static device_method_t acpi_tz_methods[] = {
152 /* Device interface */
153 DEVMETHOD(device_probe, acpi_tz_probe),
154 DEVMETHOD(device_attach, acpi_tz_attach),
155
156 DEVMETHOD_END
157 };
158
159 static driver_t acpi_tz_driver = {
160 "acpi_tz",
161 acpi_tz_methods,
162 sizeof(struct acpi_tz_softc),
163 };
164
165 static char *acpi_tz_tmp_name = "_TMP";
166
167 static devclass_t acpi_tz_devclass;
168 DRIVER_MODULE(acpi_tz, acpi, acpi_tz_driver, acpi_tz_devclass, 0, 0);
169 MODULE_DEPEND(acpi_tz, acpi, 1, 1, 1);
170
171 static struct sysctl_ctx_list acpi_tz_sysctl_ctx;
172 static struct sysctl_oid *acpi_tz_sysctl_tree;
173
174 /* Minimum cooling run time */
175 static int acpi_tz_min_runtime;
176 static int acpi_tz_polling_rate = TZ_POLLRATE;
177 static int acpi_tz_override;
178
179 /* Timezone polling thread */
180 static struct proc *acpi_tz_proc;
181 ACPI_LOCK_DECL(thermal, "ACPI thermal zone");
182
183 static int acpi_tz_cooling_unit = -1;
184
185 static int
186 acpi_tz_probe(device_t dev)
187 {
188 int result;
189
190 if (acpi_get_type(dev) == ACPI_TYPE_THERMAL && !acpi_disabled("thermal")) {
191 device_set_desc(dev, "Thermal Zone");
192 result = -10;
193 } else
194 result = ENXIO;
195 return (result);
196 }
197
198 static int
199 acpi_tz_attach(device_t dev)
200 {
201 struct acpi_tz_softc *sc;
202 struct acpi_softc *acpi_sc;
203 int error;
204 char oidname[8];
205
206 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
207
208 sc = device_get_softc(dev);
209 sc->tz_dev = dev;
210 sc->tz_handle = acpi_get_handle(dev);
211 sc->tz_requested = TZ_ACTIVE_NONE;
212 sc->tz_active = TZ_ACTIVE_UNKNOWN;
213 sc->tz_thflags = TZ_THFLAG_NONE;
214 sc->tz_cooling_proc = NULL;
215 sc->tz_cooling_proc_running = FALSE;
216 sc->tz_cooling_active = FALSE;
217 sc->tz_cooling_updated = FALSE;
218 sc->tz_cooling_enabled = FALSE;
219
220 /*
221 * Parse the current state of the thermal zone and build control
222 * structures. We don't need to worry about interference with the
223 * control thread since we haven't fully attached this device yet.
224 */
225 if ((error = acpi_tz_establish(sc)) != 0)
226 return (error);
227
228 /*
229 * Register for any Notify events sent to this zone.
230 */
231 AcpiInstallNotifyHandler(sc->tz_handle, ACPI_DEVICE_NOTIFY,
232 acpi_tz_notify_handler, sc);
233
234 /*
235 * Create our sysctl nodes.
236 *
237 * XXX we need a mechanism for adding nodes under ACPI.
238 */
239 if (device_get_unit(dev) == 0) {
240 acpi_sc = acpi_device_get_parent_softc(dev);
241 sysctl_ctx_init(&acpi_tz_sysctl_ctx);
242 acpi_tz_sysctl_tree = SYSCTL_ADD_NODE(&acpi_tz_sysctl_ctx,
243 SYSCTL_CHILDREN(acpi_sc->acpi_sysctl_tree),
244 OID_AUTO, "thermal", CTLFLAG_RD, 0, "");
245 SYSCTL_ADD_INT(&acpi_tz_sysctl_ctx,
246 SYSCTL_CHILDREN(acpi_tz_sysctl_tree),
247 OID_AUTO, "min_runtime", CTLFLAG_RW,
248 &acpi_tz_min_runtime, 0,
249 "minimum cooling run time in sec");
250 SYSCTL_ADD_INT(&acpi_tz_sysctl_ctx,
251 SYSCTL_CHILDREN(acpi_tz_sysctl_tree),
252 OID_AUTO, "polling_rate", CTLFLAG_RW,
253 &acpi_tz_polling_rate, 0, "monitor polling interval in seconds");
254 SYSCTL_ADD_INT(&acpi_tz_sysctl_ctx,
255 SYSCTL_CHILDREN(acpi_tz_sysctl_tree), OID_AUTO,
256 "user_override", CTLFLAG_RW, &acpi_tz_override, 0,
257 "allow override of thermal settings");
258 }
259 sysctl_ctx_init(&sc->tz_sysctl_ctx);
260 sprintf(oidname, "tz%d", device_get_unit(dev));
261 sc->tz_sysctl_tree = SYSCTL_ADD_NODE(&sc->tz_sysctl_ctx,
262 SYSCTL_CHILDREN(acpi_tz_sysctl_tree),
263 OID_AUTO, oidname, CTLFLAG_RD, 0, "");
264 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
265 OID_AUTO, "temperature", CTLTYPE_INT | CTLFLAG_RD,
266 &sc->tz_temperature, 0, sysctl_handle_int,
267 "IK", "current thermal zone temperature");
268 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
269 OID_AUTO, "active", CTLTYPE_INT | CTLFLAG_RW,
270 sc, 0, acpi_tz_active_sysctl, "I", "cooling is active");
271 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
272 OID_AUTO, "passive_cooling", CTLTYPE_INT | CTLFLAG_RW,
273 sc, 0, acpi_tz_cooling_sysctl, "I",
274 "enable passive (speed reduction) cooling");
275
276 SYSCTL_ADD_INT(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
277 OID_AUTO, "thermal_flags", CTLFLAG_RD,
278 &sc->tz_thflags, 0, "thermal zone flags");
279 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
280 OID_AUTO, "_PSV", CTLTYPE_INT | CTLFLAG_RW,
281 sc, offsetof(struct acpi_tz_softc, tz_zone.psv),
282 acpi_tz_temp_sysctl, "IK", "passive cooling temp setpoint");
283 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
284 OID_AUTO, "_HOT", CTLTYPE_INT | CTLFLAG_RW,
285 sc, offsetof(struct acpi_tz_softc, tz_zone.hot),
286 acpi_tz_temp_sysctl, "IK",
287 "too hot temp setpoint (suspend now)");
288 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
289 OID_AUTO, "_CRT", CTLTYPE_INT | CTLFLAG_RW,
290 sc, offsetof(struct acpi_tz_softc, tz_zone.crt),
291 acpi_tz_temp_sysctl, "IK",
292 "critical temp setpoint (shutdown now)");
293 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
294 OID_AUTO, "_ACx", CTLTYPE_INT | CTLFLAG_RD,
295 &sc->tz_zone.ac, sizeof(sc->tz_zone.ac),
296 sysctl_handle_opaque, "IK", "");
297 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
298 OID_AUTO, "_TC1", CTLTYPE_INT | CTLFLAG_RW,
299 sc, offsetof(struct acpi_tz_softc, tz_zone.tc1),
300 acpi_tz_passive_sysctl, "I",
301 "thermal constant 1 for passive cooling");
302 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
303 OID_AUTO, "_TC2", CTLTYPE_INT | CTLFLAG_RW,
304 sc, offsetof(struct acpi_tz_softc, tz_zone.tc2),
305 acpi_tz_passive_sysctl, "I",
306 "thermal constant 2 for passive cooling");
307 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
308 OID_AUTO, "_TSP", CTLTYPE_INT | CTLFLAG_RW,
309 sc, offsetof(struct acpi_tz_softc, tz_zone.tsp),
310 acpi_tz_passive_sysctl, "I",
311 "thermal sampling period for passive cooling");
312
313 /*
314 * Create thread to service all of the thermal zones. Register
315 * our power profile event handler.
316 */
317 sc->tz_event = EVENTHANDLER_REGISTER(power_profile_change,
318 acpi_tz_power_profile, sc, 0);
319 if (acpi_tz_proc == NULL) {
320 error = kproc_create(acpi_tz_thread, NULL, &acpi_tz_proc,
321 RFHIGHPID, 0, "acpi_thermal");
322 if (error != 0) {
323 device_printf(sc->tz_dev, "could not create thread - %d", error);
324 goto out;
325 }
326 }
327
328 /*
329 * Create a thread to handle passive cooling for 1st zone which
330 * has _PSV, _TSP, _TC1 and _TC2. Users can enable it for other
331 * zones manually for now.
332 *
333 * XXX We enable only one zone to avoid multiple zones conflict
334 * with each other since cpufreq currently sets all CPUs to the
335 * given frequency whereas it's possible for different thermal
336 * zones to specify independent settings for multiple CPUs.
337 */
338 if (acpi_tz_cooling_unit < 0 && acpi_tz_cooling_is_available(sc))
339 sc->tz_cooling_enabled = TRUE;
340 if (sc->tz_cooling_enabled) {
341 error = acpi_tz_cooling_thread_start(sc);
342 if (error != 0) {
343 sc->tz_cooling_enabled = FALSE;
344 goto out;
345 }
346 acpi_tz_cooling_unit = device_get_unit(dev);
347 }
348
349 /*
350 * Flag the event handler for a manual invocation by our timeout.
351 * We defer it like this so that the rest of the subsystem has time
352 * to come up. Don't bother evaluating/printing the temperature at
353 * this point; on many systems it'll be bogus until the EC is running.
354 */
355 sc->tz_flags |= TZ_FLAG_GETPROFILE;
356
357 out:
358 if (error != 0) {
359 EVENTHANDLER_DEREGISTER(power_profile_change, sc->tz_event);
360 AcpiRemoveNotifyHandler(sc->tz_handle, ACPI_DEVICE_NOTIFY,
361 acpi_tz_notify_handler);
362 sysctl_ctx_free(&sc->tz_sysctl_ctx);
363 }
364 return_VALUE (error);
365 }
366
367 /*
368 * Parse the current state of this thermal zone and set up to use it.
369 *
370 * Note that we may have previous state, which will have to be discarded.
371 */
372 static int
373 acpi_tz_establish(struct acpi_tz_softc *sc)
374 {
375 ACPI_OBJECT *obj;
376 int i;
377 char nbuf[8];
378
379 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
380
381 /* Erase any existing state. */
382 for (i = 0; i < TZ_NUMLEVELS; i++)
383 if (sc->tz_zone.al[i].Pointer != NULL)
384 AcpiOsFree(sc->tz_zone.al[i].Pointer);
385 if (sc->tz_zone.psl.Pointer != NULL)
386 AcpiOsFree(sc->tz_zone.psl.Pointer);
387
388 /*
389 * XXX: We initialize only ACPI_BUFFER to avoid race condition
390 * with passive cooling thread which refers psv, tc1, tc2 and tsp.
391 */
392 bzero(sc->tz_zone.ac, sizeof(sc->tz_zone.ac));
393 bzero(sc->tz_zone.al, sizeof(sc->tz_zone.al));
394 bzero(&sc->tz_zone.psl, sizeof(sc->tz_zone.psl));
395
396 /* Evaluate thermal zone parameters. */
397 for (i = 0; i < TZ_NUMLEVELS; i++) {
398 sprintf(nbuf, "_AC%d", i);
399 acpi_tz_getparam(sc, nbuf, &sc->tz_zone.ac[i]);
400 sprintf(nbuf, "_AL%d", i);
401 sc->tz_zone.al[i].Length = ACPI_ALLOCATE_BUFFER;
402 sc->tz_zone.al[i].Pointer = NULL;
403 AcpiEvaluateObject(sc->tz_handle, nbuf, NULL, &sc->tz_zone.al[i]);
404 obj = (ACPI_OBJECT *)sc->tz_zone.al[i].Pointer;
405 if (obj != NULL) {
406 /* Should be a package containing a list of power objects */
407 if (obj->Type != ACPI_TYPE_PACKAGE) {
408 device_printf(sc->tz_dev, "%s has unknown type %d, rejecting\n",
409 nbuf, obj->Type);
410 return_VALUE (ENXIO);
411 }
412 }
413 }
414 acpi_tz_getparam(sc, "_CRT", &sc->tz_zone.crt);
415 acpi_tz_getparam(sc, "_HOT", &sc->tz_zone.hot);
416 sc->tz_zone.psl.Length = ACPI_ALLOCATE_BUFFER;
417 sc->tz_zone.psl.Pointer = NULL;
418 AcpiEvaluateObject(sc->tz_handle, "_PSL", NULL, &sc->tz_zone.psl);
419 acpi_tz_getparam(sc, "_PSV", &sc->tz_zone.psv);
420 acpi_tz_getparam(sc, "_TC1", &sc->tz_zone.tc1);
421 acpi_tz_getparam(sc, "_TC2", &sc->tz_zone.tc2);
422 acpi_tz_getparam(sc, "_TSP", &sc->tz_zone.tsp);
423 acpi_tz_getparam(sc, "_TZP", &sc->tz_zone.tzp);
424
425 /*
426 * Sanity-check the values we've been given.
427 *
428 * XXX what do we do about systems that give us the same value for
429 * more than one of these setpoints?
430 */
431 acpi_tz_sanity(sc, &sc->tz_zone.crt, "_CRT");
432 acpi_tz_sanity(sc, &sc->tz_zone.hot, "_HOT");
433 acpi_tz_sanity(sc, &sc->tz_zone.psv, "_PSV");
434 for (i = 0; i < TZ_NUMLEVELS; i++)
435 acpi_tz_sanity(sc, &sc->tz_zone.ac[i], "_ACx");
436
437 return_VALUE (0);
438 }
439
440 static char *aclevel_string[] = {
441 "NONE", "_AC0", "_AC1", "_AC2", "_AC3", "_AC4",
442 "_AC5", "_AC6", "_AC7", "_AC8", "_AC9"
443 };
444
445 static __inline const char *
446 acpi_tz_aclevel_string(int active)
447 {
448 if (active < -1 || active >= TZ_NUMLEVELS)
449 return (aclevel_string[0]);
450
451 return (aclevel_string[active + 1]);
452 }
453
454 /*
455 * Get the current temperature.
456 */
457 static int
458 acpi_tz_get_temperature(struct acpi_tz_softc *sc)
459 {
460 int temp;
461 ACPI_STATUS status;
462
463 ACPI_FUNCTION_NAME ("acpi_tz_get_temperature");
464
465 /* Evaluate the thermal zone's _TMP method. */
466 status = acpi_GetInteger(sc->tz_handle, acpi_tz_tmp_name, &temp);
467 if (ACPI_FAILURE(status)) {
468 ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev),
469 "error fetching current temperature -- %s\n",
470 AcpiFormatException(status));
471 return (FALSE);
472 }
473
474 /* Check it for validity. */
475 acpi_tz_sanity(sc, &temp, acpi_tz_tmp_name);
476 if (temp == -1)
477 return (FALSE);
478
479 ACPI_DEBUG_PRINT((ACPI_DB_VALUES, "got %d.%dC\n", TZ_KELVTOC(temp)));
480 sc->tz_temperature = temp;
481 return (TRUE);
482 }
483
484 /*
485 * Evaluate the condition of a thermal zone, take appropriate actions.
486 */
487 static void
488 acpi_tz_monitor(void *Context)
489 {
490 struct acpi_tz_softc *sc;
491 struct timespec curtime;
492 int temp;
493 int i;
494 int newactive, newflags;
495
496 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
497
498 sc = (struct acpi_tz_softc *)Context;
499
500 /* Get the current temperature. */
501 if (!acpi_tz_get_temperature(sc)) {
502 /* XXX disable zone? go to max cooling? */
503 return_VOID;
504 }
505 temp = sc->tz_temperature;
506
507 /*
508 * Work out what we ought to be doing right now.
509 *
510 * Note that the _ACx levels sort from hot to cold.
511 */
512 newactive = TZ_ACTIVE_NONE;
513 for (i = TZ_NUMLEVELS - 1; i >= 0; i--) {
514 if (sc->tz_zone.ac[i] != -1 && temp >= sc->tz_zone.ac[i])
515 newactive = i;
516 }
517
518 /*
519 * We are going to get _ACx level down (colder side), but give a guaranteed
520 * minimum cooling run time if requested.
521 */
522 if (acpi_tz_min_runtime > 0 && sc->tz_active != TZ_ACTIVE_NONE &&
523 sc->tz_active != TZ_ACTIVE_UNKNOWN &&
524 (newactive == TZ_ACTIVE_NONE || newactive > sc->tz_active)) {
525
526 getnanotime(&curtime);
527 timespecsub(&curtime, &sc->tz_cooling_started);
528 if (curtime.tv_sec < acpi_tz_min_runtime)
529 newactive = sc->tz_active;
530 }
531
532 /* Handle user override of active mode */
533 if (sc->tz_requested != TZ_ACTIVE_NONE && (newactive == TZ_ACTIVE_NONE
534 || sc->tz_requested < newactive))
535 newactive = sc->tz_requested;
536
537 /* update temperature-related flags */
538 newflags = TZ_THFLAG_NONE;
539 if (sc->tz_zone.psv != -1 && temp >= sc->tz_zone.psv)
540 newflags |= TZ_THFLAG_PSV;
541 if (sc->tz_zone.hot != -1 && temp >= sc->tz_zone.hot)
542 newflags |= TZ_THFLAG_HOT;
543 if (sc->tz_zone.crt != -1 && temp >= sc->tz_zone.crt)
544 newflags |= TZ_THFLAG_CRT;
545
546 /* If the active cooling state has changed, we have to switch things. */
547 if (sc->tz_active == TZ_ACTIVE_UNKNOWN) {
548 /*
549 * We don't know which cooling device is on or off,
550 * so stop them all, because we now know which
551 * should be on (if any).
552 */
553 for (i = 0; i < TZ_NUMLEVELS; i++) {
554 if (sc->tz_zone.al[i].Pointer != NULL) {
555 acpi_ForeachPackageObject(
556 (ACPI_OBJECT *)sc->tz_zone.al[i].Pointer,
557 acpi_tz_switch_cooler_off, sc);
558 }
559 }
560 /* now we know that all devices are off */
561 sc->tz_active = TZ_ACTIVE_NONE;
562 }
563
564 if (newactive != sc->tz_active) {
565 /* Turn off unneeded cooling devices that are on, if any are */
566 for (i = TZ_ACTIVE_LEVEL(sc->tz_active);
567 i < TZ_ACTIVE_LEVEL(newactive); i++) {
568 acpi_ForeachPackageObject(
569 (ACPI_OBJECT *)sc->tz_zone.al[i].Pointer,
570 acpi_tz_switch_cooler_off, sc);
571 }
572 /* Turn on cooling devices that are required, if any are */
573 for (i = TZ_ACTIVE_LEVEL(sc->tz_active) - 1;
574 i >= TZ_ACTIVE_LEVEL(newactive); i--) {
575 acpi_ForeachPackageObject(
576 (ACPI_OBJECT *)sc->tz_zone.al[i].Pointer,
577 acpi_tz_switch_cooler_on, sc);
578 }
579
580 ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev),
581 "switched from %s to %s: %d.%dC\n",
582 acpi_tz_aclevel_string(sc->tz_active),
583 acpi_tz_aclevel_string(newactive), TZ_KELVTOC(temp));
584 sc->tz_active = newactive;
585 getnanotime(&sc->tz_cooling_started);
586 }
587
588 /* XXX (de)activate any passive cooling that may be required. */
589
590 /*
591 * If the temperature is at _HOT or _CRT, increment our event count.
592 * If it has occurred enough times, shutdown the system. This is
593 * needed because some systems will report an invalid high temperature
594 * for one poll cycle. It is suspected this is due to the embedded
595 * controller timing out. A typical value is 138C for one cycle on
596 * a system that is otherwise 65C.
597 *
598 * If we're almost at that threshold, notify the user through devd(8).
599 */
600 if ((newflags & (TZ_THFLAG_HOT | TZ_THFLAG_CRT)) != 0) {
601 sc->tz_validchecks++;
602 if (sc->tz_validchecks == TZ_VALIDCHECKS) {
603 device_printf(sc->tz_dev,
604 "WARNING - current temperature (%d.%dC) exceeds safe limits\n",
605 TZ_KELVTOC(sc->tz_temperature));
606 shutdown_nice(RB_POWEROFF);
607 } else if (sc->tz_validchecks == TZ_NOTIFYCOUNT)
608 acpi_UserNotify("Thermal", sc->tz_handle, TZ_NOTIFY_CRITICAL);
609 } else {
610 sc->tz_validchecks = 0;
611 }
612 sc->tz_thflags = newflags;
613
614 return_VOID;
615 }
616
617 /*
618 * Given an object, verify that it's a reference to a device of some sort,
619 * and try to switch it off.
620 */
621 static void
622 acpi_tz_switch_cooler_off(ACPI_OBJECT *obj, void *arg)
623 {
624 ACPI_HANDLE cooler;
625
626 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
627
628 cooler = acpi_GetReference(NULL, obj);
629 if (cooler == NULL) {
630 ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "can't get handle\n"));
631 return_VOID;
632 }
633
634 ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "called to turn %s off\n",
635 acpi_name(cooler)));
636 acpi_pwr_switch_consumer(cooler, ACPI_STATE_D3);
637
638 return_VOID;
639 }
640
641 /*
642 * Given an object, verify that it's a reference to a device of some sort,
643 * and try to switch it on.
644 *
645 * XXX replication of off/on function code is bad.
646 */
647 static void
648 acpi_tz_switch_cooler_on(ACPI_OBJECT *obj, void *arg)
649 {
650 struct acpi_tz_softc *sc = (struct acpi_tz_softc *)arg;
651 ACPI_HANDLE cooler;
652 ACPI_STATUS status;
653
654 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
655
656 cooler = acpi_GetReference(NULL, obj);
657 if (cooler == NULL) {
658 ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "can't get handle\n"));
659 return_VOID;
660 }
661
662 ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "called to turn %s on\n",
663 acpi_name(cooler)));
664 status = acpi_pwr_switch_consumer(cooler, ACPI_STATE_D0);
665 if (ACPI_FAILURE(status)) {
666 ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev),
667 "failed to activate %s - %s\n", acpi_name(cooler),
668 AcpiFormatException(status));
669 }
670
671 return_VOID;
672 }
673
674 /*
675 * Read/debug-print a parameter, default it to -1.
676 */
677 static void
678 acpi_tz_getparam(struct acpi_tz_softc *sc, char *node, int *data)
679 {
680
681 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
682
683 if (ACPI_FAILURE(acpi_GetInteger(sc->tz_handle, node, data))) {
684 *data = -1;
685 } else {
686 ACPI_DEBUG_PRINT((ACPI_DB_VALUES, "%s.%s = %d\n",
687 acpi_name(sc->tz_handle), node, *data));
688 }
689
690 return_VOID;
691 }
692
693 /*
694 * Sanity-check a temperature value. Assume that setpoints
695 * should be between 0C and 200C.
696 */
697 static void
698 acpi_tz_sanity(struct acpi_tz_softc *sc, int *val, char *what)
699 {
700 if (*val != -1 && (*val < TZ_ZEROC || *val > TZ_ZEROC + 2000)) {
701 /*
702 * If the value we are checking is _TMP, warn the user only
703 * once. This avoids spamming messages if, for instance, the
704 * sensor is broken and always returns an invalid temperature.
705 *
706 * This is only done for _TMP; other values always emit a
707 * warning.
708 */
709 if (what != acpi_tz_tmp_name || !sc->tz_insane_tmp_notified) {
710 device_printf(sc->tz_dev, "%s value is absurd, ignored (%d.%dC)\n",
711 what, TZ_KELVTOC(*val));
712
713 /* Don't warn the user again if the read value doesn't improve. */
714 if (what == acpi_tz_tmp_name)
715 sc->tz_insane_tmp_notified = 1;
716 }
717 *val = -1;
718 return;
719 }
720
721 /* This value is correct. Warn if it's incorrect again. */
722 if (what == acpi_tz_tmp_name)
723 sc->tz_insane_tmp_notified = 0;
724 }
725
726 /*
727 * Respond to a sysctl on the active state node.
728 */
729 static int
730 acpi_tz_active_sysctl(SYSCTL_HANDLER_ARGS)
731 {
732 struct acpi_tz_softc *sc;
733 int active;
734 int error;
735
736 sc = (struct acpi_tz_softc *)oidp->oid_arg1;
737 active = sc->tz_active;
738 error = sysctl_handle_int(oidp, &active, 0, req);
739
740 /* Error or no new value */
741 if (error != 0 || req->newptr == NULL)
742 return (error);
743 if (active < -1 || active >= TZ_NUMLEVELS)
744 return (EINVAL);
745
746 /* Set new preferred level and re-switch */
747 sc->tz_requested = active;
748 acpi_tz_signal(sc, 0);
749 return (0);
750 }
751
752 static int
753 acpi_tz_cooling_sysctl(SYSCTL_HANDLER_ARGS)
754 {
755 struct acpi_tz_softc *sc;
756 int enabled, error;
757
758 sc = (struct acpi_tz_softc *)oidp->oid_arg1;
759 enabled = sc->tz_cooling_enabled;
760 error = sysctl_handle_int(oidp, &enabled, 0, req);
761
762 /* Error or no new value */
763 if (error != 0 || req->newptr == NULL)
764 return (error);
765 if (enabled != TRUE && enabled != FALSE)
766 return (EINVAL);
767
768 if (enabled) {
769 if (acpi_tz_cooling_is_available(sc))
770 error = acpi_tz_cooling_thread_start(sc);
771 else
772 error = ENODEV;
773 if (error)
774 enabled = FALSE;
775 }
776 sc->tz_cooling_enabled = enabled;
777 return (error);
778 }
779
780 static int
781 acpi_tz_temp_sysctl(SYSCTL_HANDLER_ARGS)
782 {
783 struct acpi_tz_softc *sc;
784 int temp, *temp_ptr;
785 int error;
786
787 sc = oidp->oid_arg1;
788 temp_ptr = (int *)((uintptr_t)sc + oidp->oid_arg2);
789 temp = *temp_ptr;
790 error = sysctl_handle_int(oidp, &temp, 0, req);
791
792 /* Error or no new value */
793 if (error != 0 || req->newptr == NULL)
794 return (error);
795
796 /* Only allow changing settings if override is set. */
797 if (!acpi_tz_override)
798 return (EPERM);
799
800 /* Check user-supplied value for sanity. */
801 acpi_tz_sanity(sc, &temp, "user-supplied temp");
802 if (temp == -1)
803 return (EINVAL);
804
805 *temp_ptr = temp;
806 return (0);
807 }
808
809 static int
810 acpi_tz_passive_sysctl(SYSCTL_HANDLER_ARGS)
811 {
812 struct acpi_tz_softc *sc;
813 int val, *val_ptr;
814 int error;
815
816 sc = oidp->oid_arg1;
817 val_ptr = (int *)((uintptr_t)sc + oidp->oid_arg2);
818 val = *val_ptr;
819 error = sysctl_handle_int(oidp, &val, 0, req);
820
821 /* Error or no new value */
822 if (error != 0 || req->newptr == NULL)
823 return (error);
824
825 /* Only allow changing settings if override is set. */
826 if (!acpi_tz_override)
827 return (EPERM);
828
829 *val_ptr = val;
830 return (0);
831 }
832
833 static void
834 acpi_tz_notify_handler(ACPI_HANDLE h, UINT32 notify, void *context)
835 {
836 struct acpi_tz_softc *sc = (struct acpi_tz_softc *)context;
837
838 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
839
840 switch (notify) {
841 case TZ_NOTIFY_TEMPERATURE:
842 /* Temperature change occurred */
843 acpi_tz_signal(sc, 0);
844 break;
845 case TZ_NOTIFY_DEVICES:
846 case TZ_NOTIFY_LEVELS:
847 /* Zone devices/setpoints changed */
848 acpi_tz_signal(sc, TZ_FLAG_GETSETTINGS);
849 break;
850 default:
851 ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev),
852 "unknown Notify event 0x%x\n", notify);
853 break;
854 }
855
856 acpi_UserNotify("Thermal", h, notify);
857
858 return_VOID;
859 }
860
861 static void
862 acpi_tz_signal(struct acpi_tz_softc *sc, int flags)
863 {
864 ACPI_LOCK(thermal);
865 sc->tz_flags |= flags;
866 ACPI_UNLOCK(thermal);
867 wakeup(&acpi_tz_proc);
868 }
869
870 /*
871 * Notifies can be generated asynchronously but have also been seen to be
872 * triggered by other thermal methods. One system generates a notify of
873 * 0x81 when the fan is turned on or off. Another generates it when _SCP
874 * is called. To handle these situations, we check the zone via
875 * acpi_tz_monitor() before evaluating changes to setpoints or the cooling
876 * policy.
877 */
878 static void
879 acpi_tz_timeout(struct acpi_tz_softc *sc, int flags)
880 {
881
882 /* Check the current temperature and take action based on it */
883 acpi_tz_monitor(sc);
884
885 /* If requested, get the power profile settings. */
886 if (flags & TZ_FLAG_GETPROFILE)
887 acpi_tz_power_profile(sc);
888
889 /*
890 * If requested, check for new devices/setpoints. After finding them,
891 * check if we need to switch fans based on the new values.
892 */
893 if (flags & TZ_FLAG_GETSETTINGS) {
894 acpi_tz_establish(sc);
895 acpi_tz_monitor(sc);
896 }
897
898 /* XXX passive cooling actions? */
899 }
900
901 /*
902 * System power profile may have changed; fetch and notify the
903 * thermal zone accordingly.
904 *
905 * Since this can be called from an arbitrary eventhandler, it needs
906 * to get the ACPI lock itself.
907 */
908 static void
909 acpi_tz_power_profile(void *arg)
910 {
911 ACPI_STATUS status;
912 struct acpi_tz_softc *sc = (struct acpi_tz_softc *)arg;
913 int state;
914
915 state = power_profile_get_state();
916 if (state != POWER_PROFILE_PERFORMANCE && state != POWER_PROFILE_ECONOMY)
917 return;
918
919 /* check that we haven't decided there's no _SCP method */
920 if ((sc->tz_flags & TZ_FLAG_NO_SCP) == 0) {
921
922 /* Call _SCP to set the new profile */
923 status = acpi_SetInteger(sc->tz_handle, "_SCP",
924 (state == POWER_PROFILE_PERFORMANCE) ? 0 : 1);
925 if (ACPI_FAILURE(status)) {
926 if (status != AE_NOT_FOUND)
927 ACPI_VPRINT(sc->tz_dev,
928 acpi_device_get_parent_softc(sc->tz_dev),
929 "can't evaluate %s._SCP - %s\n",
930 acpi_name(sc->tz_handle),
931 AcpiFormatException(status));
932 sc->tz_flags |= TZ_FLAG_NO_SCP;
933 } else {
934 /* We have to re-evaluate the entire zone now */
935 acpi_tz_signal(sc, TZ_FLAG_GETSETTINGS);
936 }
937 }
938 }
939
940 /*
941 * Thermal zone monitor thread.
942 */
943 static void
944 acpi_tz_thread(void *arg)
945 {
946 device_t *devs;
947 int devcount, i;
948 int flags;
949 struct acpi_tz_softc **sc;
950
951 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
952
953 devs = NULL;
954 devcount = 0;
955 sc = NULL;
956
957 for (;;) {
958 /* If the number of devices has changed, re-evaluate. */
959 if (devclass_get_count(acpi_tz_devclass) != devcount) {
960 if (devs != NULL) {
961 free(devs, M_TEMP);
962 free(sc, M_TEMP);
963 }
964 devclass_get_devices(acpi_tz_devclass, &devs, &devcount);
965 sc = malloc(sizeof(struct acpi_tz_softc *) * devcount, M_TEMP,
966 M_WAITOK | M_ZERO);
967 for (i = 0; i < devcount; i++)
968 sc[i] = device_get_softc(devs[i]);
969 }
970
971 /* Check for temperature events and act on them. */
972 for (i = 0; i < devcount; i++) {
973 ACPI_LOCK(thermal);
974 flags = sc[i]->tz_flags;
975 sc[i]->tz_flags &= TZ_FLAG_NO_SCP;
976 ACPI_UNLOCK(thermal);
977 acpi_tz_timeout(sc[i], flags);
978 }
979
980 /* If more work to do, don't go to sleep yet. */
981 ACPI_LOCK(thermal);
982 for (i = 0; i < devcount; i++) {
983 if (sc[i]->tz_flags & ~TZ_FLAG_NO_SCP)
984 break;
985 }
986
987 /*
988 * If we have no more work, sleep for a while, setting PDROP so that
989 * the mutex will not be reacquired. Otherwise, drop the mutex and
990 * loop to handle more events.
991 */
992 if (i == devcount)
993 msleep(&acpi_tz_proc, &thermal_mutex, PZERO | PDROP, "tzpoll",
994 hz * acpi_tz_polling_rate);
995 else
996 ACPI_UNLOCK(thermal);
997 }
998 }
999
1000 static int
1001 acpi_tz_cpufreq_restore(struct acpi_tz_softc *sc)
1002 {
1003 device_t dev;
1004 int error;
1005
1006 if (!sc->tz_cooling_updated)
1007 return (0);
1008 if ((dev = devclass_get_device(devclass_find("cpufreq"), 0)) == NULL)
1009 return (ENXIO);
1010 ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev),
1011 "temperature %d.%dC: resuming previous clock speed (%d MHz)\n",
1012 TZ_KELVTOC(sc->tz_temperature), sc->tz_cooling_saved_freq);
1013 error = CPUFREQ_SET(dev, NULL, CPUFREQ_PRIO_KERN);
1014 if (error == 0)
1015 sc->tz_cooling_updated = FALSE;
1016 return (error);
1017 }
1018
1019 static int
1020 acpi_tz_cpufreq_update(struct acpi_tz_softc *sc, int req)
1021 {
1022 device_t dev;
1023 struct cf_level *levels;
1024 int num_levels, error, freq, desired_freq, perf, i;
1025
1026 levels = malloc(CPUFREQ_MAX_LEVELS * sizeof(*levels), M_TEMP, M_NOWAIT);
1027 if (levels == NULL)
1028 return (ENOMEM);
1029
1030 /*
1031 * Find the main device, cpufreq0. We don't yet support independent
1032 * CPU frequency control on SMP.
1033 */
1034 if ((dev = devclass_get_device(devclass_find("cpufreq"), 0)) == NULL) {
1035 error = ENXIO;
1036 goto out;
1037 }
1038
1039 /* Get the current frequency. */
1040 error = CPUFREQ_GET(dev, &levels[0]);
1041 if (error)
1042 goto out;
1043 freq = levels[0].total_set.freq;
1044
1045 /* Get the current available frequency levels. */
1046 num_levels = CPUFREQ_MAX_LEVELS;
1047 error = CPUFREQ_LEVELS(dev, levels, &num_levels);
1048 if (error) {
1049 if (error == E2BIG)
1050 printf("cpufreq: need to increase CPUFREQ_MAX_LEVELS\n");
1051 goto out;
1052 }
1053
1054 /* Calculate the desired frequency as a percent of the max frequency. */
1055 perf = 100 * freq / levels[0].total_set.freq - req;
1056 if (perf < 0)
1057 perf = 0;
1058 else if (perf > 100)
1059 perf = 100;
1060 desired_freq = levels[0].total_set.freq * perf / 100;
1061
1062 if (desired_freq < freq) {
1063 /* Find the closest available frequency, rounding down. */
1064 for (i = 0; i < num_levels; i++)
1065 if (levels[i].total_set.freq <= desired_freq)
1066 break;
1067
1068 /* If we didn't find a relevant setting, use the lowest. */
1069 if (i == num_levels)
1070 i--;
1071 } else {
1072 /* If we didn't decrease frequency yet, don't increase it. */
1073 if (!sc->tz_cooling_updated) {
1074 sc->tz_cooling_active = FALSE;
1075 goto out;
1076 }
1077
1078 /* Use saved cpu frequency as maximum value. */
1079 if (desired_freq > sc->tz_cooling_saved_freq)
1080 desired_freq = sc->tz_cooling_saved_freq;
1081
1082 /* Find the closest available frequency, rounding up. */
1083 for (i = num_levels - 1; i >= 0; i--)
1084 if (levels[i].total_set.freq >= desired_freq)
1085 break;
1086
1087 /* If we didn't find a relevant setting, use the highest. */
1088 if (i == -1)
1089 i++;
1090
1091 /* If we're going to the highest frequency, restore the old setting. */
1092 if (i == 0 || desired_freq == sc->tz_cooling_saved_freq) {
1093 error = acpi_tz_cpufreq_restore(sc);
1094 if (error == 0)
1095 sc->tz_cooling_active = FALSE;
1096 goto out;
1097 }
1098 }
1099
1100 /* If we are going to a new frequency, activate it. */
1101 if (levels[i].total_set.freq != freq) {
1102 ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev),
1103 "temperature %d.%dC: %screasing clock speed "
1104 "from %d MHz to %d MHz\n",
1105 TZ_KELVTOC(sc->tz_temperature),
1106 (freq > levels[i].total_set.freq) ? "de" : "in",
1107 freq, levels[i].total_set.freq);
1108 error = CPUFREQ_SET(dev, &levels[i], CPUFREQ_PRIO_KERN);
1109 if (error == 0 && !sc->tz_cooling_updated) {
1110 sc->tz_cooling_saved_freq = freq;
1111 sc->tz_cooling_updated = TRUE;
1112 }
1113 }
1114
1115 out:
1116 if (levels)
1117 free(levels, M_TEMP);
1118 return (error);
1119 }
1120
1121 /*
1122 * Passive cooling thread; monitors current temperature according to the
1123 * cooling interval and calculates whether to scale back CPU frequency.
1124 */
1125 static void
1126 acpi_tz_cooling_thread(void *arg)
1127 {
1128 struct acpi_tz_softc *sc;
1129 int error, perf, curr_temp, prev_temp;
1130
1131 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
1132
1133 sc = (struct acpi_tz_softc *)arg;
1134
1135 prev_temp = sc->tz_temperature;
1136 while (sc->tz_cooling_enabled) {
1137 if (sc->tz_cooling_active)
1138 (void)acpi_tz_get_temperature(sc);
1139 curr_temp = sc->tz_temperature;
1140 if (curr_temp >= sc->tz_zone.psv)
1141 sc->tz_cooling_active = TRUE;
1142 if (sc->tz_cooling_active) {
1143 perf = sc->tz_zone.tc1 * (curr_temp - prev_temp) +
1144 sc->tz_zone.tc2 * (curr_temp - sc->tz_zone.psv);
1145 perf /= 10;
1146
1147 if (perf != 0) {
1148 error = acpi_tz_cpufreq_update(sc, perf);
1149
1150 /*
1151 * If error and not simply a higher priority setting was
1152 * active, disable cooling.
1153 */
1154 if (error != 0 && error != EPERM) {
1155 device_printf(sc->tz_dev,
1156 "failed to set new freq, disabling passive cooling\n");
1157 sc->tz_cooling_enabled = FALSE;
1158 }
1159 }
1160 }
1161 prev_temp = curr_temp;
1162 tsleep(&sc->tz_cooling_proc, PZERO, "cooling",
1163 hz * sc->tz_zone.tsp / 10);
1164 }
1165 if (sc->tz_cooling_active) {
1166 acpi_tz_cpufreq_restore(sc);
1167 sc->tz_cooling_active = FALSE;
1168 }
1169 sc->tz_cooling_proc = NULL;
1170 ACPI_LOCK(thermal);
1171 sc->tz_cooling_proc_running = FALSE;
1172 ACPI_UNLOCK(thermal);
1173 kproc_exit(0);
1174 }
1175
1176 /*
1177 * TODO: We ignore _PSL (list of cooling devices) since cpufreq enumerates
1178 * all CPUs for us. However, it's possible in the future _PSL will
1179 * reference non-CPU devices so we may want to support it then.
1180 */
1181 static int
1182 acpi_tz_cooling_is_available(struct acpi_tz_softc *sc)
1183 {
1184 return (sc->tz_zone.tc1 != -1 && sc->tz_zone.tc2 != -1 &&
1185 sc->tz_zone.tsp != -1 && sc->tz_zone.tsp != 0 &&
1186 sc->tz_zone.psv != -1);
1187 }
1188
1189 static int
1190 acpi_tz_cooling_thread_start(struct acpi_tz_softc *sc)
1191 {
1192 int error;
1193
1194 ACPI_LOCK(thermal);
1195 if (sc->tz_cooling_proc_running) {
1196 ACPI_UNLOCK(thermal);
1197 return (0);
1198 }
1199 sc->tz_cooling_proc_running = TRUE;
1200 ACPI_UNLOCK(thermal);
1201 error = 0;
1202 if (sc->tz_cooling_proc == NULL) {
1203 error = kproc_create(acpi_tz_cooling_thread, sc,
1204 &sc->tz_cooling_proc, RFHIGHPID, 0, "acpi_cooling%d",
1205 device_get_unit(sc->tz_dev));
1206 if (error != 0) {
1207 device_printf(sc->tz_dev, "could not create thread - %d", error);
1208 ACPI_LOCK(thermal);
1209 sc->tz_cooling_proc_running = FALSE;
1210 ACPI_UNLOCK(thermal);
1211 }
1212 }
1213 return (error);
1214 }
Cache object: 77cd919072bbe263d61bfdba54abf979
|