FreeBSD/Linux Kernel Cross Reference
sys/dev/acpica/acpi_thermal.c

     /*-
      * Copyright (c) 2000, 2001 Michael Smith
      * Copyright (c) 2000 BSDi
      * All rights reserved.
      *
      * Redistribution and use in source and binary forms, with or without
      * modification, are permitted provided that the following conditions
      * are met:
      * 1. Redistributions of source code must retain the above copyright
     *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     *
     * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
     * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
     * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     * SUCH DAMAGE.
     *
     *      $FreeBSD: releng/5.1/sys/dev/acpica/acpi_thermal.c 105282 2002-10-16 17:28:53Z jhb $
     */
    
    #include "opt_acpi.h"
    #include <sys/param.h>
    #include <sys/kernel.h>
    #include <sys/kthread.h>
    #include <sys/bus.h>
    #include <sys/proc.h>
    #include <sys/reboot.h>
    #include <sys/sysctl.h>
    #include <sys/unistd.h>
    #include <sys/power.h>
    
    #include "acpi.h"
    
    #include <dev/acpica/acpivar.h>
    
    /*
     * Hooks for the ACPI CA debugging infrastructure
     */
    #define _COMPONENT      ACPI_THERMAL
    ACPI_MODULE_NAME("THERMAL")
    
    #define TZ_ZEROC        2732
    #define TZ_KELVTOC(x)   (((x) - TZ_ZEROC) / 10), (((x) - TZ_ZEROC) % 10)
    
    #define TZ_NOTIFY_TEMPERATURE   0x80
    #define TZ_NOTIFY_DEVICES       0x81
    #define TZ_NOTIFY_LEVELS        0x82
    
    #define TZ_POLLRATE     30              /* every 30 seconds by default */
    
    #define TZ_NUMLEVELS    10              /* defined by ACPI spec */
    struct acpi_tz_zone {
        int         ac[TZ_NUMLEVELS];
        ACPI_BUFFER al[TZ_NUMLEVELS];
        int         crt;
        int         hot;
        ACPI_BUFFER psl;
        int         psv;
        int         tc1;
        int         tc2;
        int         tsp;
        int         tzp;
    };
    
    
    struct acpi_tz_softc {
        device_t                    tz_dev;                 /* device handle */
        ACPI_HANDLE                 tz_handle;              /* thermal zone handle */
        int                         tz_temperature;         /* current temperature */
        int                         tz_active;              /* current active cooling */
    #define TZ_ACTIVE_NONE          -1
        int                         tz_requested;           /* user-requested minimum active cooling */
        int                         tz_thflags;             /* current temperature-related flags */
    #define TZ_THFLAG_NONE          0
    #define TZ_THFLAG_PSV           (1<<0)
    #define TZ_THFLAG_HOT           (1<<2)
    #define TZ_THFLAG_CRT           (1<<3)    
        int                         tz_flags;
    #define TZ_FLAG_NO_SCP          (1<<0)                  /* no _SCP method */
    #define TZ_FLAG_GETPROFILE      (1<<1)                  /* fetch power_profile in timeout */
        struct timespec             tz_cooling_started;     /* current cooling starting time */
    
        struct sysctl_ctx_list      tz_sysctl_ctx;          /* sysctl tree */
        struct sysctl_oid           *tz_sysctl_tree;
        
        struct acpi_tz_zone         tz_zone;                /* thermal zone parameters */
        int                         tz_tmp_updating;
    };
    
    static int      acpi_tz_probe(device_t dev);
   static int      acpi_tz_attach(device_t dev);
   static int      acpi_tz_establish(struct acpi_tz_softc *sc);
   static void     acpi_tz_monitor(struct acpi_tz_softc *sc);
   static void     acpi_tz_all_off(struct acpi_tz_softc *sc);
   static void     acpi_tz_switch_cooler_off(ACPI_OBJECT *obj, void *arg);
   static void     acpi_tz_switch_cooler_on(ACPI_OBJECT *obj, void *arg);
   static void     acpi_tz_getparam(struct acpi_tz_softc *sc, char *node, int *data);
   static void     acpi_tz_sanity(struct acpi_tz_softc *sc, int *val, char *what);
   static int      acpi_tz_active_sysctl(SYSCTL_HANDLER_ARGS);
   static void     acpi_tz_notify_handler(ACPI_HANDLE h, UINT32 notify, void *context);
   static void     acpi_tz_timeout(struct acpi_tz_softc *sc);
   static void     acpi_tz_power_profile(void *arg);
   
   static void     acpi_tz_thread(void *arg);
   static struct proc *acpi_tz_proc;
   
   static device_method_t acpi_tz_methods[] = {
       /* Device interface */
       DEVMETHOD(device_probe,     acpi_tz_probe),
       DEVMETHOD(device_attach,    acpi_tz_attach),
   
       {0, 0}
   };
   
   static driver_t acpi_tz_driver = {
       "acpi_tz",
       acpi_tz_methods,
       sizeof(struct acpi_tz_softc),
   };
   
   static devclass_t acpi_tz_devclass;
   DRIVER_MODULE(acpi_tz, acpi, acpi_tz_driver, acpi_tz_devclass, 0, 0);
   
   static struct sysctl_ctx_list   acpi_tz_sysctl_ctx;
   static struct sysctl_oid        *acpi_tz_sysctl_tree;
   
   static int                      acpi_tz_min_runtime = 0;/* minimum cooling run time */
   static int                      acpi_tz_polling_rate = TZ_POLLRATE;
   
   /*
    * Match an ACPI thermal zone.
    */
   static int
   acpi_tz_probe(device_t dev)
   {
       int         result;
       ACPI_LOCK_DECL;
       
       ACPI_LOCK;
       
       /* no FUNCTION_TRACE - too noisy */
   
       if ((acpi_get_type(dev) == ACPI_TYPE_THERMAL) &&
           !acpi_disabled("thermal")) {
           device_set_desc(dev, "thermal zone");
           result = -10;
       } else {
           result = ENXIO;
       }
       ACPI_UNLOCK;
       return(result);
   }
   
   /*
    * Attach to an ACPI thermal zone.
    */
   static int
   acpi_tz_attach(device_t dev)
   {
       struct acpi_tz_softc        *sc;
       struct acpi_softc           *acpi_sc;
       int                         error;
       char                        oidname[8];
       ACPI_LOCK_DECL;
   
       ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
   
       ACPI_LOCK;
   
       sc = device_get_softc(dev);
       sc->tz_dev = dev;
       sc->tz_handle = acpi_get_handle(dev);
       sc->tz_requested = TZ_ACTIVE_NONE;
       sc->tz_tmp_updating = 0;
   
       /*
        * Parse the current state of the thermal zone and build control
        * structures.
        */
       if ((error = acpi_tz_establish(sc)) != 0)
           goto out;
       
       /*
        * Register for any Notify events sent to this zone.
        */
       AcpiInstallNotifyHandler(sc->tz_handle, ACPI_DEVICE_NOTIFY, 
                                acpi_tz_notify_handler, sc);
   
       /*
        * Create our sysctl nodes.
        *
        * XXX we need a mechanism for adding nodes under ACPI.
        */
       if (device_get_unit(dev) == 0) {
           acpi_sc = acpi_device_get_parent_softc(dev);
           sysctl_ctx_init(&acpi_tz_sysctl_ctx);
           acpi_tz_sysctl_tree = SYSCTL_ADD_NODE(&acpi_tz_sysctl_ctx,
                                                 SYSCTL_CHILDREN(acpi_sc->acpi_sysctl_tree),
                                                 OID_AUTO, "thermal", CTLFLAG_RD, 0, "");
           SYSCTL_ADD_INT(&acpi_tz_sysctl_ctx,
                          SYSCTL_CHILDREN(acpi_tz_sysctl_tree),
                          OID_AUTO, "min_runtime", CTLFLAG_RD | CTLFLAG_RW,
                          &acpi_tz_min_runtime, 0, "minimum cooling run time in sec");
           SYSCTL_ADD_INT(&acpi_tz_sysctl_ctx,
                          SYSCTL_CHILDREN(acpi_tz_sysctl_tree),
                          OID_AUTO, "polling_rate", CTLFLAG_RD | CTLFLAG_RW,
                          &acpi_tz_polling_rate, 0, "monitor polling rate");
       }
       sysctl_ctx_init(&sc->tz_sysctl_ctx);
       sprintf(oidname, "tz%d", device_get_unit(dev));
       sc->tz_sysctl_tree = SYSCTL_ADD_NODE(&sc->tz_sysctl_ctx,
                                            SYSCTL_CHILDREN(acpi_tz_sysctl_tree), OID_AUTO,
                                            oidname, CTLFLAG_RD, 0, "");
       SYSCTL_ADD_INT(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
                      OID_AUTO, "temperature", CTLFLAG_RD,
                      &sc->tz_temperature, 0, "current thermal zone temperature");
       SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
                       OID_AUTO, "active", CTLTYPE_INT | CTLFLAG_RW,
                       sc, 0, acpi_tz_active_sysctl, "I", "");
       
       SYSCTL_ADD_INT(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
                      OID_AUTO, "thermal_flags", CTLFLAG_RD,
                      &sc->tz_thflags, 0, "thermal zone flags");
       SYSCTL_ADD_INT(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
                      OID_AUTO, "_PSV", CTLFLAG_RD,
                      &sc->tz_zone.psv, 0, "");
       SYSCTL_ADD_INT(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
                      OID_AUTO, "_HOT", CTLFLAG_RD,
                      &sc->tz_zone.hot, 0, "");
       SYSCTL_ADD_INT(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
                      OID_AUTO, "_CRT", CTLFLAG_RD,
                      &sc->tz_zone.crt, 0, "");
       SYSCTL_ADD_OPAQUE(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
                         OID_AUTO, "_ACx", CTLFLAG_RD, &sc->tz_zone.ac,
                         sizeof(sc->tz_zone.ac), "I", "");
   
   
       /*
        * Register our power profile event handler, and flag it for a manual
        * invocation by our timeout.  We defer it like this so that the rest
        * of the subsystem has time to come up.
        */
       EVENTHANDLER_REGISTER(power_profile_change, acpi_tz_power_profile, sc, 0);
       sc->tz_flags |= TZ_FLAG_GETPROFILE;
   
       /*
        * Don't bother evaluating/printing the temperature at this point;
        * on many systems it'll be bogus until the EC is running.
        */
   
       /*
        * Create our thread; we only need one, it will service all of the
        * thermal zones.
        */
       if (acpi_tz_proc == NULL) {
               error = kthread_create(acpi_tz_thread, NULL, &acpi_tz_proc,
                                      RFHIGHPID, 0, "acpi_thermal");
               if (error != 0) {
                       device_printf(sc->tz_dev, "could not create thread - %d", error);
                       goto out;
               }
       }
           
    out:
       ACPI_UNLOCK;
   
       return_VALUE(error);
   }
   
   /*
    * Parse the current state of this thermal zone and set up to use it.
    *
    * Note that we may have previous state, which will have to be discarded.
    */
   static int
   acpi_tz_establish(struct acpi_tz_softc *sc)
   {
       ACPI_OBJECT *obj;
       int         i;
       char        nbuf[8];
       
       ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
   
       ACPI_ASSERTLOCK;
   
       /*
        * Power everything off and erase any existing state.
        */
       acpi_tz_all_off(sc);
       for (i = 0; i < TZ_NUMLEVELS; i++)
           if (sc->tz_zone.al[i].Pointer != NULL)
               AcpiOsFree(sc->tz_zone.al[i].Pointer);
       if (sc->tz_zone.psl.Pointer != NULL)
           AcpiOsFree(sc->tz_zone.psl.Pointer);
       bzero(&sc->tz_zone, sizeof(sc->tz_zone));
   
       /*
        * Evaluate thermal zone parameters.
        */
       for (i = 0; i < TZ_NUMLEVELS; i++) {
           sprintf(nbuf, "_AC%d", i);
           acpi_tz_getparam(sc, nbuf, &sc->tz_zone.ac[i]);
           sprintf(nbuf, "_AL%d", i);
           sc->tz_zone.al[i].Length = ACPI_ALLOCATE_BUFFER;
           sc->tz_zone.al[i].Pointer = NULL;
           AcpiEvaluateObject(sc->tz_handle, nbuf, NULL, &sc->tz_zone.al[i]);
           obj = (ACPI_OBJECT *)sc->tz_zone.al[i].Pointer;
           if (obj != NULL) {
               /* should be a package containing a list of power objects */
               if (obj->Type != ACPI_TYPE_PACKAGE) {
                   device_printf(sc->tz_dev, "%s has unknown object type %d, rejecting\n",
                                 nbuf, obj->Type);
                   return_VALUE(ENXIO);
               }
           }
       }
       acpi_tz_getparam(sc, "_CRT", &sc->tz_zone.crt);
       acpi_tz_getparam(sc, "_HOT", &sc->tz_zone.hot);
       sc->tz_zone.psl.Length = ACPI_ALLOCATE_BUFFER;
       sc->tz_zone.psl.Pointer = NULL;
       AcpiEvaluateObject(sc->tz_handle, "_PSL", NULL, &sc->tz_zone.psl);
       acpi_tz_getparam(sc, "_PSV", &sc->tz_zone.psv);
       acpi_tz_getparam(sc, "_TC1", &sc->tz_zone.tc1);
       acpi_tz_getparam(sc, "_TC2", &sc->tz_zone.tc2);
       acpi_tz_getparam(sc, "_TSP", &sc->tz_zone.tsp);
       acpi_tz_getparam(sc, "_TZP", &sc->tz_zone.tzp);
   
       /*
        * Sanity-check the values we've been given.
        *
        * XXX what do we do about systems that give us the same value for
        *     more than one of these setpoints?
        */
       acpi_tz_sanity(sc, &sc->tz_zone.crt, "_CRT");
       acpi_tz_sanity(sc, &sc->tz_zone.hot, "_HOT");
       acpi_tz_sanity(sc, &sc->tz_zone.psv, "_PSV");
       for (i = 0; i < TZ_NUMLEVELS; i++)
           acpi_tz_sanity(sc, &sc->tz_zone.ac[i], "_ACx");
   
       /*
        * Power off everything that we've just been given.
        */
       acpi_tz_all_off(sc);
   
       return_VALUE(0);
   }
   
   static char     *aclevel_string[] =     {
           "NONE", "_AC0", "_AC1", "_AC2", "_AC3", "_AC4",
           "_AC5", "_AC6", "_AC7", "_AC8", "_AC9" };
   
   static __inline const char *
   acpi_tz_aclevel_string(int active)
   {
           if (active < -1 || active >= TZ_NUMLEVELS) {
                   return (aclevel_string[0]);
           }
   
           return (aclevel_string[active+1]);
   }
   
   /*
    * Evaluate the condition of a thermal zone, take appropriate actions.
    */
   static void
   acpi_tz_monitor(struct acpi_tz_softc *sc)
   {
       int         temp;
       int         i;
       int         newactive, newflags;
       struct      timespec curtime;
       ACPI_STATUS status;
   
       ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
   
       ACPI_ASSERTLOCK;
   
       if (sc->tz_tmp_updating) {
           goto out;
       }
       sc->tz_tmp_updating = 1;
   
       /*
        * Get the current temperature.
        */
       if (ACPI_FAILURE(status = acpi_EvaluateInteger(sc->tz_handle, "_TMP", &temp))) {
           ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev),
               "error fetching current temperature -- %s\n",
                AcpiFormatException(status));
           /* XXX disable zone? go to max cooling? */
           goto out;
       }
   
       ACPI_DEBUG_PRINT((ACPI_DB_VALUES, "got %d.%dC\n", TZ_KELVTOC(temp)));
       sc->tz_temperature = temp;
   
       /*
        * Work out what we ought to be doing right now.
        *
        * Note that the _ACx levels sort from hot to cold.
        */
       newactive = TZ_ACTIVE_NONE;
       for (i = TZ_NUMLEVELS - 1; i >= 0; i--) {
           if ((sc->tz_zone.ac[i] != -1) && (temp >= sc->tz_zone.ac[i])) {
               newactive = i;
               if (sc->tz_active != newactive) {
                   ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev),
                       "_AC%d: temperature %d.%d >= setpoint %d.%d\n", i,
                       TZ_KELVTOC(temp), TZ_KELVTOC(sc->tz_zone.ac[i]));
                   getnanotime(&sc->tz_cooling_started);
               }
           }
       }
   
       /*
        * We are going to get _ACx level down (colder side), but give a guaranteed
        * minimum cooling run time if requested.
        */
       if (acpi_tz_min_runtime > 0 && sc->tz_active != TZ_ACTIVE_NONE &&
           (newactive == TZ_ACTIVE_NONE || newactive > sc->tz_active)) {
           getnanotime(&curtime);
           timespecsub(&curtime, &sc->tz_cooling_started);
           if (curtime.tv_sec < acpi_tz_min_runtime) {
               newactive = sc->tz_active;
           }
       }
   
       /* handle user override of active mode */
       if (sc->tz_requested > newactive)
           newactive = sc->tz_requested;
   
       /* update temperature-related flags */
       newflags = TZ_THFLAG_NONE;
       if ((sc->tz_zone.psv != -1) && (temp >= sc->tz_zone.psv))
           newflags |= TZ_THFLAG_PSV;
       if ((sc->tz_zone.hot != -1) && (temp >= sc->tz_zone.hot))
           newflags |= TZ_THFLAG_HOT;
       if ((sc->tz_zone.crt != -1) && (temp >= sc->tz_zone.crt))
           newflags |= TZ_THFLAG_CRT;
   
       /*
        * If the active cooling state has changed, we have to switch things.
        */
       if (newactive != sc->tz_active) {
   
           /* turn off the cooling devices that are on, if any are */
           if (sc->tz_active != TZ_ACTIVE_NONE)
               acpi_ForeachPackageObject((ACPI_OBJECT *)sc->tz_zone.al[sc->tz_active].Pointer,
                                         acpi_tz_switch_cooler_off, sc);
   
           /* turn on cooling devices that are required, if any are */
           if (newactive != TZ_ACTIVE_NONE)
               acpi_ForeachPackageObject((ACPI_OBJECT *)sc->tz_zone.al[newactive].Pointer,
                                         acpi_tz_switch_cooler_on, sc);
           ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev),
               "switched from %s to %s: %d.%dC\n",
               acpi_tz_aclevel_string(sc->tz_active),
               acpi_tz_aclevel_string(newactive), TZ_KELVTOC(temp));
           sc->tz_active = newactive;
       }
   
       /*
        * XXX (de)activate any passive cooling that may be required.
        */
   
       /*
        * If we have just become _HOT or _CRT, warn the user.
        *
        * We should actually shut down at this point, but it's not clear
        * that some systems don't actually map _CRT to the same value as _AC0.
        */
       if ((newflags & (TZ_THFLAG_HOT | TZ_THFLAG_CRT)) && 
           !(sc->tz_thflags & (TZ_THFLAG_HOT | TZ_THFLAG_CRT))) {
           device_printf(sc->tz_dev, "WARNING - current temperature (%d.%dC) exceeds system limits\n",
                         TZ_KELVTOC(sc->tz_temperature));
           /* shutdown_nice(RB_POWEROFF);*/
       }
       sc->tz_thflags = newflags;
   
   out:
       sc->tz_tmp_updating = 0;
       return_VOID;
   }
   
   /*
    * Turn off all the cooling devices.
    */
   static void
   acpi_tz_all_off(struct acpi_tz_softc *sc)
   {
       int         i;
   
       ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
   
       ACPI_ASSERTLOCK;
       
       /*
        * Scan all the _ALx objects, and turn them all off.
        */
       for (i = 0; i < TZ_NUMLEVELS; i++) {
           if (sc->tz_zone.al[i].Pointer == NULL)
               continue;
           acpi_ForeachPackageObject((ACPI_OBJECT *)sc->tz_zone.al[i].Pointer,
                                     acpi_tz_switch_cooler_off, sc);
       }
   
       /*
        * XXX revert any passive-cooling options.
        */
   
       sc->tz_active = TZ_ACTIVE_NONE;
       sc->tz_thflags = TZ_THFLAG_NONE;
       return_VOID;
   }
   
   /*
    * Given an object, verify that it's a reference to a device of some sort, 
    * and try to switch it off.
    */
   static void
   acpi_tz_switch_cooler_off(ACPI_OBJECT *obj, void *arg)
   {
       ACPI_HANDLE         cooler;
   
       ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
   
       ACPI_ASSERTLOCK;
   
       switch(obj->Type) {
       case ACPI_TYPE_ANY:
           ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "called to turn %s off\n", acpi_name(obj->Reference.Handle)));
   
           acpi_pwr_switch_consumer(obj->Reference.Handle, ACPI_STATE_D3);
           break;
           
       case ACPI_TYPE_STRING:
           ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "called to turn %s off\n", obj->String.Pointer));
   
           /*
            * Find the handle for the device and turn it off.
            * The String object here seems to contain a fully-qualified path, so we
            * don't have to search for it in our parents.
            *
            * XXX This may not always be the case.
            */
           if (ACPI_SUCCESS(AcpiGetHandle(NULL, obj->String.Pointer, &cooler)))
               acpi_pwr_switch_consumer(cooler, ACPI_STATE_D3);
           break;
           
       default:
           ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "called to handle unsupported object type %d\n",
                             obj->Type));
           break;
       }
       return_VOID;
   }
   
   /*
    * Given an object, verify that it's a reference to a device of some sort, 
    * and try to switch it on.
    *
    * XXX replication of off/on function code is bad, mmmkay?
    */
   static void
   acpi_tz_switch_cooler_on(ACPI_OBJECT *obj, void *arg)
   {
       struct acpi_tz_softc        *sc = (struct acpi_tz_softc *)arg;
       ACPI_HANDLE                 cooler;
       ACPI_STATUS                 status;
       
       ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
   
       ACPI_ASSERTLOCK;
   
       switch(obj->Type) {
       case ACPI_TYPE_ANY:
           ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "called to turn %s on\n", acpi_name(obj->Reference.Handle)));
   
           if (ACPI_FAILURE(status = acpi_pwr_switch_consumer(obj->Reference.Handle, ACPI_STATE_D0))) {
               ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev),
                   "failed to activate %s - %s\n", acpi_name(obj->Reference.Handle),
                   AcpiFormatException(status));
           }
           break;
           
       case ACPI_TYPE_STRING:
           ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "called to turn %s on\n", obj->String.Pointer));
   
           /*
            * Find the handle for the device and turn it off.
            * The String object here seems to contain a fully-qualified path, so we
            * don't have to search for it in our parents.
            *
            * XXX This may not always be the case.
            */
           if (ACPI_SUCCESS(AcpiGetHandle(NULL, obj->String.Pointer, &cooler))) {
               if (ACPI_FAILURE(status = acpi_pwr_switch_consumer(cooler, ACPI_STATE_D0))) {
                   ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev),
                       "failed to activate %s - %s\n",
                       obj->String.Pointer, AcpiFormatException(status));
               }
           } else {
               ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev),
                   "couldn't find %s\n", obj->String.Pointer);
           }
           break;
           
       default:
           ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "called to handle unsupported object type %d\n",
                             obj->Type));
           break;
       }
           return_VOID;
   }
   
   /*
    * Read/debug-print a parameter, default it to -1.
    */
   static void
   acpi_tz_getparam(struct acpi_tz_softc *sc, char *node, int *data)
   {
   
       ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
   
       ACPI_ASSERTLOCK;
   
       if (ACPI_FAILURE(acpi_EvaluateInteger(sc->tz_handle, node, data))) {
           *data = -1;
       } else {
           ACPI_DEBUG_PRINT((ACPI_DB_VALUES, "%s.%s = %d\n", acpi_name(sc->tz_handle),
                             node, *data));
       }
       return_VOID;    
   }
   
   /*
    * Sanity-check a temperature value.  Assume that setpoints
    * should be between 0C and 150C.
    */
   static void
   acpi_tz_sanity(struct acpi_tz_softc *sc, int *val, char *what)
   {
       if ((*val != -1) && ((*val < TZ_ZEROC) || (*val > (TZ_ZEROC + 1500)))) {
           device_printf(sc->tz_dev, "%s value is absurd, ignored (%d.%dC)\n",
                         what, TZ_KELVTOC(*val));
           *val = -1;
       }
   }
   
   /*
    * Respond to a sysctl on the active state node.
    */    
   static int
   acpi_tz_active_sysctl(SYSCTL_HANDLER_ARGS)
   {
       struct acpi_tz_softc        *sc;
       int                         active;
       int                         error;
       ACPI_LOCK_DECL;
   
       ACPI_LOCK;
   
       sc = (struct acpi_tz_softc *)oidp->oid_arg1;
       active = sc->tz_active;
       error = sysctl_handle_int(oidp, &active, 0, req);
   
       /* error or no new value */
       if ((error != 0) || (req->newptr == NULL))
           goto out;
       
       /* range check */
       if ((active < -1) || (active >= TZ_NUMLEVELS)) {
           error = EINVAL;
           goto out;
       }
   
       /* set new preferred level and re-switch */
       sc->tz_requested = active;
       acpi_tz_monitor(sc);
   
    out:
       ACPI_UNLOCK;
       return(error);
   }
   
   /*
    * Respond to a Notify event sent to the zone.
    */
   static void
   acpi_tz_notify_handler(ACPI_HANDLE h, UINT32 notify, void *context)
   {
       struct acpi_tz_softc        *sc = (struct acpi_tz_softc *)context;
   
       ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
   
       ACPI_ASSERTLOCK;
   
       switch(notify) {
       case TZ_NOTIFY_TEMPERATURE:
           /* temperature change occurred */
           AcpiOsQueueForExecution(OSD_PRIORITY_HIGH, (OSD_EXECUTION_CALLBACK)acpi_tz_monitor, sc);
           break;
       case TZ_NOTIFY_DEVICES:
       case TZ_NOTIFY_LEVELS:
           /* zone devices/setpoints changed */
           AcpiOsQueueForExecution(OSD_PRIORITY_HIGH, (OSD_EXECUTION_CALLBACK)acpi_tz_establish, sc);
           break;
       default:
           ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev),
               "unknown Notify event 0x%x\n", notify);
           break;
       }
       return_VOID;
   }
   
   /*
    * Poll the thermal zone.
    */
   static void
   acpi_tz_timeout(struct acpi_tz_softc *sc)
   {
   
       /* do we need to get the power profile settings? */
       if (sc->tz_flags & TZ_FLAG_GETPROFILE) {
           acpi_tz_power_profile((void *)sc);
           sc->tz_flags &= ~TZ_FLAG_GETPROFILE;
       }
   
       ACPI_ASSERTLOCK;
   
       /* check the current temperature and take action based on it */
       acpi_tz_monitor(sc);
   
       /* XXX passive cooling actions? */
   }
   
   /*
    * System power profile may have changed; fetch and notify the
    * thermal zone accordingly.
    *
    * Since this can be called from an arbitrary eventhandler, it needs
    * to get the ACPI lock itself.
    */
   static void
   acpi_tz_power_profile(void *arg)
   {
       ACPI_OBJECT_LIST            args;
       ACPI_OBJECT                 obj;
       ACPI_STATUS                 status;
       struct acpi_tz_softc        *sc = (struct acpi_tz_softc *)arg;
       int                         state;
       ACPI_LOCK_DECL;
   
       state = power_profile_get_state();
       if (state != POWER_PROFILE_PERFORMANCE &&
           state != POWER_PROFILE_ECONOMY) {
           return;
       }
   
       ACPI_LOCK;
   
       /* check that we haven't decided there's no _SCP method */
       if (!(sc->tz_flags & TZ_FLAG_NO_SCP)) {
   
           /* call _SCP to set the new profile */
           obj.Type = ACPI_TYPE_INTEGER;
           obj.Integer.Value = (state == POWER_PROFILE_PERFORMANCE) ? 0 : 1;
           args.Count = 1;
           args.Pointer = &obj;
           if (ACPI_FAILURE(status = AcpiEvaluateObject(sc->tz_handle, "_SCP", &args, NULL))) {
               if (status != AE_NOT_FOUND)
                   ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev),
                       "can't evaluate %s._SCP - %s\n", acpi_name(sc->tz_handle),
                       AcpiFormatException(status));
               sc->tz_flags |= TZ_FLAG_NO_SCP;
           } else {
               /* we have to re-evaluate the entire zone now */
               AcpiOsQueueForExecution(OSD_PRIORITY_HIGH, (OSD_EXECUTION_CALLBACK)acpi_tz_establish, sc);
           }
       }
       ACPI_UNLOCK;
   }
   
   /*
    * Thermal zone monitor thread.
    */
   static void
   acpi_tz_thread(void *arg)
   {
       device_t    *devs;
       int         devcount, i;
       ACPI_LOCK_DECL;
   
       ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
   
   
       devs = NULL;
       devcount = 0;
   
       for (;;) {
           tsleep(&acpi_tz_proc, PZERO, "nothing", hz * acpi_tz_polling_rate);
   
   #if __FreeBSD_version >= 500000
           mtx_lock(&Giant);
   #endif
   
           if (devcount == 0)
               devclass_get_devices(acpi_tz_devclass, &devs, &devcount);
   
           ACPI_LOCK;
           for (i = 0; i < devcount; i++)
               acpi_tz_timeout(device_get_softc(devs[i]));
           ACPI_UNLOCK;
   
   #if __FreeBSD_version >= 500000
           mtx_unlock(&Giant);
   #endif
       }
   }

Cache object: 39965a57d6ac7e45cf55e68b2f81fb08