1 /*-
2 * Copyright (c) 2000, 2001 Michael Smith
3 * Copyright (c) 2000 BSDi
4 * All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 * SUCH DAMAGE.
26 */
27
28 #include <sys/cdefs.h>
29 __FBSDID("$FreeBSD: releng/6.2/sys/dev/acpica/acpi_thermal.c 162115 2006-09-07 17:25:47Z ume $");
30
31 #include "opt_acpi.h"
32 #include <sys/param.h>
33 #include <sys/kernel.h>
34 #include <sys/bus.h>
35 #include <sys/cpu.h>
36 #include <sys/kthread.h>
37 #include <sys/malloc.h>
38 #include <sys/module.h>
39 #include <sys/bus.h>
40 #include <sys/proc.h>
41 #include <sys/reboot.h>
42 #include <sys/sysctl.h>
43 #include <sys/unistd.h>
44 #include <sys/power.h>
45
46 #include "cpufreq_if.h"
47
48 #include <contrib/dev/acpica/acpi.h>
49 #include <dev/acpica/acpivar.h>
50
51 /* Hooks for the ACPI CA debugging infrastructure */
52 #define _COMPONENT ACPI_THERMAL
53 ACPI_MODULE_NAME("THERMAL")
54
55 #define TZ_ZEROC 2732
56 #define TZ_KELVTOC(x) (((x) - TZ_ZEROC) / 10), abs(((x) - TZ_ZEROC) % 10)
57
58 #define TZ_NOTIFY_TEMPERATURE 0x80 /* Temperature changed. */
59 #define TZ_NOTIFY_LEVELS 0x81 /* Cooling levels changed. */
60 #define TZ_NOTIFY_DEVICES 0x82 /* Device lists changed. */
61 #define TZ_NOTIFY_CRITICAL 0xcc /* Fake notify that _CRT/_HOT reached. */
62
63 /* Check for temperature changes every 10 seconds by default */
64 #define TZ_POLLRATE 10
65
66 /* Make sure the reported temperature is valid for this number of polls. */
67 #define TZ_VALIDCHECKS 3
68
69 /* Notify the user we will be shutting down in one more poll cycle. */
70 #define TZ_NOTIFYCOUNT (TZ_VALIDCHECKS - 1)
71
72 /* ACPI spec defines this */
73 #define TZ_NUMLEVELS 10
74 struct acpi_tz_zone {
75 int ac[TZ_NUMLEVELS];
76 ACPI_BUFFER al[TZ_NUMLEVELS];
77 int crt;
78 int hot;
79 ACPI_BUFFER psl;
80 int psv;
81 int tc1;
82 int tc2;
83 int tsp;
84 int tzp;
85 };
86
87 struct acpi_tz_softc {
88 device_t tz_dev;
89 ACPI_HANDLE tz_handle; /*Thermal zone handle*/
90 int tz_temperature; /*Current temperature*/
91 int tz_active; /*Current active cooling*/
92 #define TZ_ACTIVE_NONE -1
93 int tz_requested; /*Minimum active cooling*/
94 int tz_thflags; /*Current temp-related flags*/
95 #define TZ_THFLAG_NONE 0
96 #define TZ_THFLAG_PSV (1<<0)
97 #define TZ_THFLAG_HOT (1<<2)
98 #define TZ_THFLAG_CRT (1<<3)
99 int tz_flags;
100 #define TZ_FLAG_NO_SCP (1<<0) /*No _SCP method*/
101 #define TZ_FLAG_GETPROFILE (1<<1) /*Get power_profile in timeout*/
102 #define TZ_FLAG_GETSETTINGS (1<<2) /*Get devs/setpoints*/
103 struct timespec tz_cooling_started;
104 /*Current cooling starting time*/
105
106 struct sysctl_ctx_list tz_sysctl_ctx;
107 struct sysctl_oid *tz_sysctl_tree;
108 eventhandler_tag tz_event;
109
110 struct acpi_tz_zone tz_zone; /*Thermal zone parameters*/
111 int tz_validchecks;
112
113 /* passive cooling */
114 struct proc *tz_cooling_proc;
115 int tz_cooling_proc_running;
116 int tz_cooling_enabled;
117 int tz_cooling_active;
118 int tz_cooling_updated;
119 int tz_cooling_saved_freq;
120 };
121
122 #define CPUFREQ_MAX_LEVELS 64 /* XXX cpufreq should export this */
123
124 static int acpi_tz_probe(device_t dev);
125 static int acpi_tz_attach(device_t dev);
126 static int acpi_tz_establish(struct acpi_tz_softc *sc);
127 static void acpi_tz_monitor(void *Context);
128 static void acpi_tz_switch_cooler_off(ACPI_OBJECT *obj, void *arg);
129 static void acpi_tz_switch_cooler_on(ACPI_OBJECT *obj, void *arg);
130 static void acpi_tz_getparam(struct acpi_tz_softc *sc, char *node,
131 int *data);
132 static void acpi_tz_sanity(struct acpi_tz_softc *sc, int *val, char *what);
133 static int acpi_tz_active_sysctl(SYSCTL_HANDLER_ARGS);
134 static int acpi_tz_cooling_sysctl(SYSCTL_HANDLER_ARGS);
135 static int acpi_tz_temp_sysctl(SYSCTL_HANDLER_ARGS);
136 static void acpi_tz_notify_handler(ACPI_HANDLE h, UINT32 notify,
137 void *context);
138 static void acpi_tz_signal(struct acpi_tz_softc *sc, int flags);
139 static void acpi_tz_timeout(struct acpi_tz_softc *sc, int flags);
140 static void acpi_tz_power_profile(void *arg);
141 static void acpi_tz_thread(void *arg);
142 static int acpi_tz_cooling_is_available(struct acpi_tz_softc *sc);
143 static int acpi_tz_cooling_thread_start(struct acpi_tz_softc *sc);
144
145 static device_method_t acpi_tz_methods[] = {
146 /* Device interface */
147 DEVMETHOD(device_probe, acpi_tz_probe),
148 DEVMETHOD(device_attach, acpi_tz_attach),
149
150 {0, 0}
151 };
152
153 static driver_t acpi_tz_driver = {
154 "acpi_tz",
155 acpi_tz_methods,
156 sizeof(struct acpi_tz_softc),
157 };
158
159 static devclass_t acpi_tz_devclass;
160 DRIVER_MODULE(acpi_tz, acpi, acpi_tz_driver, acpi_tz_devclass, 0, 0);
161 MODULE_DEPEND(acpi_tz, acpi, 1, 1, 1);
162
163 static struct sysctl_ctx_list acpi_tz_sysctl_ctx;
164 static struct sysctl_oid *acpi_tz_sysctl_tree;
165
166 /* Minimum cooling run time */
167 static int acpi_tz_min_runtime;
168 static int acpi_tz_polling_rate = TZ_POLLRATE;
169 static int acpi_tz_override;
170
171 /* Timezone polling thread */
172 static struct proc *acpi_tz_proc;
173 ACPI_LOCK_DECL(thermal, "ACPI thermal zone");
174
175 static int
176 acpi_tz_probe(device_t dev)
177 {
178 int result;
179
180 if (acpi_get_type(dev) == ACPI_TYPE_THERMAL && !acpi_disabled("thermal")) {
181 device_set_desc(dev, "Thermal Zone");
182 result = -10;
183 } else
184 result = ENXIO;
185 return (result);
186 }
187
188 static int
189 acpi_tz_attach(device_t dev)
190 {
191 struct acpi_tz_softc *sc;
192 struct acpi_softc *acpi_sc;
193 int error;
194 char oidname[8];
195
196 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
197
198 sc = device_get_softc(dev);
199 sc->tz_dev = dev;
200 sc->tz_handle = acpi_get_handle(dev);
201 sc->tz_requested = TZ_ACTIVE_NONE;
202 sc->tz_active = TZ_ACTIVE_NONE;
203 sc->tz_thflags = TZ_THFLAG_NONE;
204 sc->tz_cooling_proc = NULL;
205 sc->tz_cooling_proc_running = FALSE;
206 sc->tz_cooling_active = FALSE;
207 sc->tz_cooling_updated = FALSE;
208
209 /*
210 * Always attempt to enable passive cooling for tz0. Users can enable
211 * it for other zones manually for now.
212 *
213 * XXX We need to test if multiple zones conflict with each other
214 * since cpufreq currently sets all CPUs to the given frequency whereas
215 * it's possible for different thermal zones to specify independent
216 * settings for multiple CPUs.
217 */
218 sc->tz_cooling_enabled = (device_get_unit(dev) == 0);
219
220 /*
221 * Parse the current state of the thermal zone and build control
222 * structures. We don't need to worry about interference with the
223 * control thread since we haven't fully attached this device yet.
224 */
225 if ((error = acpi_tz_establish(sc)) != 0)
226 return (error);
227
228 /*
229 * Register for any Notify events sent to this zone.
230 */
231 AcpiInstallNotifyHandler(sc->tz_handle, ACPI_DEVICE_NOTIFY,
232 acpi_tz_notify_handler, sc);
233
234 /*
235 * Create our sysctl nodes.
236 *
237 * XXX we need a mechanism for adding nodes under ACPI.
238 */
239 if (device_get_unit(dev) == 0) {
240 acpi_sc = acpi_device_get_parent_softc(dev);
241 sysctl_ctx_init(&acpi_tz_sysctl_ctx);
242 acpi_tz_sysctl_tree = SYSCTL_ADD_NODE(&acpi_tz_sysctl_ctx,
243 SYSCTL_CHILDREN(acpi_sc->acpi_sysctl_tree),
244 OID_AUTO, "thermal", CTLFLAG_RD, 0, "");
245 SYSCTL_ADD_INT(&acpi_tz_sysctl_ctx,
246 SYSCTL_CHILDREN(acpi_tz_sysctl_tree),
247 OID_AUTO, "min_runtime", CTLFLAG_RW,
248 &acpi_tz_min_runtime, 0,
249 "minimum cooling run time in sec");
250 SYSCTL_ADD_INT(&acpi_tz_sysctl_ctx,
251 SYSCTL_CHILDREN(acpi_tz_sysctl_tree),
252 OID_AUTO, "polling_rate", CTLFLAG_RW,
253 &acpi_tz_polling_rate, 0, "monitor polling rate");
254 SYSCTL_ADD_INT(&acpi_tz_sysctl_ctx,
255 SYSCTL_CHILDREN(acpi_tz_sysctl_tree), OID_AUTO,
256 "user_override", CTLFLAG_RW, &acpi_tz_override, 0,
257 "allow override of thermal settings");
258 }
259 sysctl_ctx_init(&sc->tz_sysctl_ctx);
260 sprintf(oidname, "tz%d", device_get_unit(dev));
261 sc->tz_sysctl_tree = SYSCTL_ADD_NODE(&sc->tz_sysctl_ctx,
262 SYSCTL_CHILDREN(acpi_tz_sysctl_tree),
263 OID_AUTO, oidname, CTLFLAG_RD, 0, "");
264 SYSCTL_ADD_OPAQUE(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
265 OID_AUTO, "temperature", CTLFLAG_RD, &sc->tz_temperature,
266 sizeof(sc->tz_temperature), "IK",
267 "current thermal zone temperature");
268 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
269 OID_AUTO, "active", CTLTYPE_INT | CTLFLAG_RW,
270 sc, 0, acpi_tz_active_sysctl, "I", "cooling is active");
271 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
272 OID_AUTO, "passive_cooling", CTLTYPE_INT | CTLFLAG_RW,
273 sc, 0, acpi_tz_cooling_sysctl, "I",
274 "enable passive (speed reduction) cooling");
275
276 SYSCTL_ADD_INT(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
277 OID_AUTO, "thermal_flags", CTLFLAG_RD,
278 &sc->tz_thflags, 0, "thermal zone flags");
279 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
280 OID_AUTO, "_PSV", CTLTYPE_INT | CTLFLAG_RW,
281 sc, offsetof(struct acpi_tz_softc, tz_zone.psv),
282 acpi_tz_temp_sysctl, "IK", "passive cooling temp setpoint");
283 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
284 OID_AUTO, "_HOT", CTLTYPE_INT | CTLFLAG_RW,
285 sc, offsetof(struct acpi_tz_softc, tz_zone.hot),
286 acpi_tz_temp_sysctl, "IK",
287 "too hot temp setpoint (suspend now)");
288 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
289 OID_AUTO, "_CRT", CTLTYPE_INT | CTLFLAG_RW,
290 sc, offsetof(struct acpi_tz_softc, tz_zone.crt),
291 acpi_tz_temp_sysctl, "IK",
292 "critical temp setpoint (shutdown now)");
293 SYSCTL_ADD_OPAQUE(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree),
294 OID_AUTO, "_ACx", CTLFLAG_RD, &sc->tz_zone.ac,
295 sizeof(sc->tz_zone.ac), "IK", "");
296
297 /*
298 * Create thread to service all of the thermal zones. Register
299 * our power profile event handler.
300 */
301 sc->tz_event = EVENTHANDLER_REGISTER(power_profile_change,
302 acpi_tz_power_profile, sc, 0);
303 if (acpi_tz_proc == NULL) {
304 error = kthread_create(acpi_tz_thread, NULL, &acpi_tz_proc,
305 RFHIGHPID, 0, "acpi_thermal");
306 if (error != 0) {
307 device_printf(sc->tz_dev, "could not create thread - %d", error);
308 goto out;
309 }
310 }
311
312 /* Create a thread to handle passive cooling for each zone if enabled. */
313 if (sc->tz_cooling_enabled) {
314 if (acpi_tz_cooling_is_available(sc)) {
315 error = acpi_tz_cooling_thread_start(sc);
316 if (error != 0) {
317 sc->tz_cooling_enabled = FALSE;
318 goto out;
319 }
320 } else
321 sc->tz_cooling_enabled = FALSE;
322 }
323
324 /*
325 * Flag the event handler for a manual invocation by our timeout.
326 * We defer it like this so that the rest of the subsystem has time
327 * to come up. Don't bother evaluating/printing the temperature at
328 * this point; on many systems it'll be bogus until the EC is running.
329 */
330 sc->tz_flags |= TZ_FLAG_GETPROFILE;
331
332 out:
333 if (error != 0) {
334 EVENTHANDLER_DEREGISTER(power_profile_change, sc->tz_event);
335 AcpiRemoveNotifyHandler(sc->tz_handle, ACPI_DEVICE_NOTIFY,
336 acpi_tz_notify_handler);
337 sysctl_ctx_free(&sc->tz_sysctl_ctx);
338 }
339 return_VALUE (error);
340 }
341
342 /*
343 * Parse the current state of this thermal zone and set up to use it.
344 *
345 * Note that we may have previous state, which will have to be discarded.
346 */
347 static int
348 acpi_tz_establish(struct acpi_tz_softc *sc)
349 {
350 ACPI_OBJECT *obj;
351 int i;
352 char nbuf[8];
353
354 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
355
356 /* Erase any existing state. */
357 for (i = 0; i < TZ_NUMLEVELS; i++)
358 if (sc->tz_zone.al[i].Pointer != NULL)
359 AcpiOsFree(sc->tz_zone.al[i].Pointer);
360 if (sc->tz_zone.psl.Pointer != NULL)
361 AcpiOsFree(sc->tz_zone.psl.Pointer);
362
363 /*
364 * XXX: We initialize only ACPI_BUFFER to avoid race condition
365 * with passive cooling thread which refers psv, tc1, tc2 and tsp.
366 */
367 bzero(sc->tz_zone.ac, sizeof(sc->tz_zone.ac));
368 bzero(sc->tz_zone.al, sizeof(sc->tz_zone.al));
369 bzero(&sc->tz_zone.psl, sizeof(sc->tz_zone.psl));
370
371 /* Evaluate thermal zone parameters. */
372 for (i = 0; i < TZ_NUMLEVELS; i++) {
373 sprintf(nbuf, "_AC%d", i);
374 acpi_tz_getparam(sc, nbuf, &sc->tz_zone.ac[i]);
375 sprintf(nbuf, "_AL%d", i);
376 sc->tz_zone.al[i].Length = ACPI_ALLOCATE_BUFFER;
377 sc->tz_zone.al[i].Pointer = NULL;
378 AcpiEvaluateObject(sc->tz_handle, nbuf, NULL, &sc->tz_zone.al[i]);
379 obj = (ACPI_OBJECT *)sc->tz_zone.al[i].Pointer;
380 if (obj != NULL) {
381 /* Should be a package containing a list of power objects */
382 if (obj->Type != ACPI_TYPE_PACKAGE) {
383 device_printf(sc->tz_dev, "%s has unknown type %d, rejecting\n",
384 nbuf, obj->Type);
385 return_VALUE (ENXIO);
386 }
387 }
388 }
389 acpi_tz_getparam(sc, "_CRT", &sc->tz_zone.crt);
390 acpi_tz_getparam(sc, "_HOT", &sc->tz_zone.hot);
391 sc->tz_zone.psl.Length = ACPI_ALLOCATE_BUFFER;
392 sc->tz_zone.psl.Pointer = NULL;
393 AcpiEvaluateObject(sc->tz_handle, "_PSL", NULL, &sc->tz_zone.psl);
394 acpi_tz_getparam(sc, "_PSV", &sc->tz_zone.psv);
395 acpi_tz_getparam(sc, "_TC1", &sc->tz_zone.tc1);
396 acpi_tz_getparam(sc, "_TC2", &sc->tz_zone.tc2);
397 acpi_tz_getparam(sc, "_TSP", &sc->tz_zone.tsp);
398 acpi_tz_getparam(sc, "_TZP", &sc->tz_zone.tzp);
399
400 /*
401 * Sanity-check the values we've been given.
402 *
403 * XXX what do we do about systems that give us the same value for
404 * more than one of these setpoints?
405 */
406 acpi_tz_sanity(sc, &sc->tz_zone.crt, "_CRT");
407 acpi_tz_sanity(sc, &sc->tz_zone.hot, "_HOT");
408 acpi_tz_sanity(sc, &sc->tz_zone.psv, "_PSV");
409 for (i = 0; i < TZ_NUMLEVELS; i++)
410 acpi_tz_sanity(sc, &sc->tz_zone.ac[i], "_ACx");
411
412 return_VALUE (0);
413 }
414
415 static char *aclevel_string[] = {
416 "NONE", "_AC0", "_AC1", "_AC2", "_AC3", "_AC4",
417 "_AC5", "_AC6", "_AC7", "_AC8", "_AC9"
418 };
419
420 static __inline const char *
421 acpi_tz_aclevel_string(int active)
422 {
423 if (active < -1 || active >= TZ_NUMLEVELS)
424 return (aclevel_string[0]);
425
426 return (aclevel_string[active + 1]);
427 }
428
429 /*
430 * Get the current temperature.
431 */
432 static int
433 acpi_tz_get_temperature(struct acpi_tz_softc *sc)
434 {
435 int temp;
436 ACPI_STATUS status;
437
438 ACPI_FUNCTION_NAME ("acpi_tz_get_temperature");
439
440 status = acpi_GetInteger(sc->tz_handle, "_TMP", &temp);
441 if (ACPI_FAILURE(status)) {
442 ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev),
443 "error fetching current temperature -- %s\n",
444 AcpiFormatException(status));
445 return (FALSE);
446 }
447
448 ACPI_DEBUG_PRINT((ACPI_DB_VALUES, "got %d.%dC\n", TZ_KELVTOC(temp)));
449 sc->tz_temperature = temp;
450 return (TRUE);
451 }
452
453 /*
454 * Evaluate the condition of a thermal zone, take appropriate actions.
455 */
456 static void
457 acpi_tz_monitor(void *Context)
458 {
459 struct acpi_tz_softc *sc;
460 struct timespec curtime;
461 int temp;
462 int i;
463 int newactive, newflags;
464
465 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
466
467 sc = (struct acpi_tz_softc *)Context;
468
469 /* Get the current temperature. */
470 if (!acpi_tz_get_temperature(sc)) {
471 /* XXX disable zone? go to max cooling? */
472 return_VOID;
473 }
474 temp = sc->tz_temperature;
475
476 /*
477 * Work out what we ought to be doing right now.
478 *
479 * Note that the _ACx levels sort from hot to cold.
480 */
481 newactive = TZ_ACTIVE_NONE;
482 for (i = TZ_NUMLEVELS - 1; i >= 0; i--) {
483 if (sc->tz_zone.ac[i] != -1 && temp >= sc->tz_zone.ac[i]) {
484 newactive = i;
485 if (sc->tz_active != newactive) {
486 ACPI_VPRINT(sc->tz_dev,
487 acpi_device_get_parent_softc(sc->tz_dev),
488 "_AC%d: temperature %d.%d >= setpoint %d.%d\n", i,
489 TZ_KELVTOC(temp), TZ_KELVTOC(sc->tz_zone.ac[i]));
490 }
491 }
492 }
493
494 /*
495 * We are going to get _ACx level down (colder side), but give a guaranteed
496 * minimum cooling run time if requested.
497 */
498 if (acpi_tz_min_runtime > 0 && sc->tz_active != TZ_ACTIVE_NONE &&
499 (newactive == TZ_ACTIVE_NONE || newactive > sc->tz_active)) {
500
501 getnanotime(&curtime);
502 timespecsub(&curtime, &sc->tz_cooling_started);
503 if (curtime.tv_sec < acpi_tz_min_runtime)
504 newactive = sc->tz_active;
505 }
506
507 /* Handle user override of active mode */
508 if (sc->tz_requested != TZ_ACTIVE_NONE && sc->tz_requested < newactive)
509 newactive = sc->tz_requested;
510
511 /* update temperature-related flags */
512 newflags = TZ_THFLAG_NONE;
513 if (sc->tz_zone.psv != -1 && temp >= sc->tz_zone.psv)
514 newflags |= TZ_THFLAG_PSV;
515 if (sc->tz_zone.hot != -1 && temp >= sc->tz_zone.hot)
516 newflags |= TZ_THFLAG_HOT;
517 if (sc->tz_zone.crt != -1 && temp >= sc->tz_zone.crt)
518 newflags |= TZ_THFLAG_CRT;
519
520 /* If the active cooling state has changed, we have to switch things. */
521 if (newactive != sc->tz_active) {
522 /* Turn off the cooling devices that are on, if any are */
523 if (sc->tz_active != TZ_ACTIVE_NONE)
524 acpi_ForeachPackageObject(
525 (ACPI_OBJECT *)sc->tz_zone.al[sc->tz_active].Pointer,
526 acpi_tz_switch_cooler_off, sc);
527
528 /* Turn on cooling devices that are required, if any are */
529 if (newactive != TZ_ACTIVE_NONE) {
530 acpi_ForeachPackageObject(
531 (ACPI_OBJECT *)sc->tz_zone.al[newactive].Pointer,
532 acpi_tz_switch_cooler_on, sc);
533 }
534 ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev),
535 "switched from %s to %s: %d.%dC\n",
536 acpi_tz_aclevel_string(sc->tz_active),
537 acpi_tz_aclevel_string(newactive), TZ_KELVTOC(temp));
538 sc->tz_active = newactive;
539 getnanotime(&sc->tz_cooling_started);
540 }
541
542 /* XXX (de)activate any passive cooling that may be required. */
543
544 /*
545 * If the temperature is at _HOT or _CRT, increment our event count.
546 * If it has occurred enough times, shutdown the system. This is
547 * needed because some systems will report an invalid high temperature
548 * for one poll cycle. It is suspected this is due to the embedded
549 * controller timing out. A typical value is 138C for one cycle on
550 * a system that is otherwise 65C.
551 *
552 * If we're almost at that threshold, notify the user through devd(8).
553 */
554 if ((newflags & (TZ_THFLAG_HOT | TZ_THFLAG_CRT)) != 0) {
555 sc->tz_validchecks++;
556 if (sc->tz_validchecks == TZ_VALIDCHECKS) {
557 device_printf(sc->tz_dev,
558 "WARNING - current temperature (%d.%dC) exceeds safe limits\n",
559 TZ_KELVTOC(sc->tz_temperature));
560 shutdown_nice(RB_POWEROFF);
561 } else if (sc->tz_validchecks == TZ_NOTIFYCOUNT)
562 acpi_UserNotify("Thermal", sc->tz_handle, TZ_NOTIFY_CRITICAL);
563 } else {
564 sc->tz_validchecks = 0;
565 }
566 sc->tz_thflags = newflags;
567
568 return_VOID;
569 }
570
571 /*
572 * Given an object, verify that it's a reference to a device of some sort,
573 * and try to switch it off.
574 */
575 static void
576 acpi_tz_switch_cooler_off(ACPI_OBJECT *obj, void *arg)
577 {
578 ACPI_HANDLE cooler;
579
580 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
581
582 cooler = acpi_GetReference(NULL, obj);
583 if (cooler == NULL) {
584 ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "can't get handle\n"));
585 return_VOID;
586 }
587
588 ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "called to turn %s off\n",
589 acpi_name(cooler)));
590 acpi_pwr_switch_consumer(cooler, ACPI_STATE_D3);
591
592 return_VOID;
593 }
594
595 /*
596 * Given an object, verify that it's a reference to a device of some sort,
597 * and try to switch it on.
598 *
599 * XXX replication of off/on function code is bad.
600 */
601 static void
602 acpi_tz_switch_cooler_on(ACPI_OBJECT *obj, void *arg)
603 {
604 struct acpi_tz_softc *sc = (struct acpi_tz_softc *)arg;
605 ACPI_HANDLE cooler;
606 ACPI_STATUS status;
607
608 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
609
610 cooler = acpi_GetReference(NULL, obj);
611 if (cooler == NULL) {
612 ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "can't get handle\n"));
613 return_VOID;
614 }
615
616 ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "called to turn %s on\n",
617 acpi_name(cooler)));
618 status = acpi_pwr_switch_consumer(cooler, ACPI_STATE_D0);
619 if (ACPI_FAILURE(status)) {
620 ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev),
621 "failed to activate %s - %s\n", acpi_name(cooler),
622 AcpiFormatException(status));
623 }
624
625 return_VOID;
626 }
627
628 /*
629 * Read/debug-print a parameter, default it to -1.
630 */
631 static void
632 acpi_tz_getparam(struct acpi_tz_softc *sc, char *node, int *data)
633 {
634
635 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
636
637 if (ACPI_FAILURE(acpi_GetInteger(sc->tz_handle, node, data))) {
638 *data = -1;
639 } else {
640 ACPI_DEBUG_PRINT((ACPI_DB_VALUES, "%s.%s = %d\n",
641 acpi_name(sc->tz_handle), node, *data));
642 }
643
644 return_VOID;
645 }
646
647 /*
648 * Sanity-check a temperature value. Assume that setpoints
649 * should be between 0C and 150C.
650 */
651 static void
652 acpi_tz_sanity(struct acpi_tz_softc *sc, int *val, char *what)
653 {
654 if (*val != -1 && (*val < TZ_ZEROC || *val > TZ_ZEROC + 1500)) {
655 device_printf(sc->tz_dev, "%s value is absurd, ignored (%d.%dC)\n",
656 what, TZ_KELVTOC(*val));
657 *val = -1;
658 }
659 }
660
661 /*
662 * Respond to a sysctl on the active state node.
663 */
664 static int
665 acpi_tz_active_sysctl(SYSCTL_HANDLER_ARGS)
666 {
667 struct acpi_tz_softc *sc;
668 int active;
669 int error;
670
671 sc = (struct acpi_tz_softc *)oidp->oid_arg1;
672 active = sc->tz_active;
673 error = sysctl_handle_int(oidp, &active, 0, req);
674
675 /* Error or no new value */
676 if (error != 0 || req->newptr == NULL)
677 return (error);
678 if (active < -1 || active >= TZ_NUMLEVELS)
679 return (EINVAL);
680
681 /* Set new preferred level and re-switch */
682 sc->tz_requested = active;
683 acpi_tz_signal(sc, 0);
684 return (0);
685 }
686
687 static int
688 acpi_tz_cooling_sysctl(SYSCTL_HANDLER_ARGS)
689 {
690 struct acpi_tz_softc *sc;
691 int enabled, error;
692
693 sc = (struct acpi_tz_softc *)oidp->oid_arg1;
694 enabled = sc->tz_cooling_enabled;
695 error = sysctl_handle_int(oidp, &enabled, 0, req);
696
697 /* Error or no new value */
698 if (error != 0 || req->newptr == NULL)
699 return (error);
700 if (enabled != TRUE && enabled != FALSE)
701 return (EINVAL);
702
703 if (enabled) {
704 if (acpi_tz_cooling_is_available(sc))
705 error = acpi_tz_cooling_thread_start(sc);
706 else
707 error = ENODEV;
708 if (error)
709 enabled = FALSE;
710 }
711 sc->tz_cooling_enabled = enabled;
712 return (error);
713 }
714
715 static int
716 acpi_tz_temp_sysctl(SYSCTL_HANDLER_ARGS)
717 {
718 struct acpi_tz_softc *sc;
719 int temp, *temp_ptr;
720 int error;
721
722 sc = oidp->oid_arg1;
723 temp_ptr = (int *)((uintptr_t)sc + oidp->oid_arg2);
724 temp = *temp_ptr;
725 error = sysctl_handle_int(oidp, &temp, 0, req);
726
727 /* Error or no new value */
728 if (error != 0 || req->newptr == NULL)
729 return (error);
730
731 /* Only allow changing settings if override is set. */
732 if (!acpi_tz_override)
733 return (EPERM);
734
735 /* Check user-supplied value for sanity. */
736 acpi_tz_sanity(sc, &temp, "user-supplied temp");
737 if (temp == -1)
738 return (EINVAL);
739
740 *temp_ptr = temp;
741 return (0);
742 }
743
744 static void
745 acpi_tz_notify_handler(ACPI_HANDLE h, UINT32 notify, void *context)
746 {
747 struct acpi_tz_softc *sc = (struct acpi_tz_softc *)context;
748
749 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
750
751 switch (notify) {
752 case TZ_NOTIFY_TEMPERATURE:
753 /* Temperature change occurred */
754 acpi_tz_signal(sc, 0);
755 break;
756 case TZ_NOTIFY_DEVICES:
757 case TZ_NOTIFY_LEVELS:
758 /* Zone devices/setpoints changed */
759 acpi_tz_signal(sc, TZ_FLAG_GETSETTINGS);
760 break;
761 default:
762 ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev),
763 "unknown Notify event 0x%x\n", notify);
764 break;
765 }
766
767 acpi_UserNotify("Thermal", h, notify);
768
769 return_VOID;
770 }
771
772 static void
773 acpi_tz_signal(struct acpi_tz_softc *sc, int flags)
774 {
775 ACPI_LOCK(thermal);
776 sc->tz_flags |= flags;
777 ACPI_UNLOCK(thermal);
778 wakeup(&acpi_tz_proc);
779 }
780
781 /*
782 * Notifies can be generated asynchronously but have also been seen to be
783 * triggered by other thermal methods. One system generates a notify of
784 * 0x81 when the fan is turned on or off. Another generates it when _SCP
785 * is called. To handle these situations, we check the zone via
786 * acpi_tz_monitor() before evaluating changes to setpoints or the cooling
787 * policy.
788 */
789 static void
790 acpi_tz_timeout(struct acpi_tz_softc *sc, int flags)
791 {
792
793 /* Check the current temperature and take action based on it */
794 acpi_tz_monitor(sc);
795
796 /* If requested, get the power profile settings. */
797 if (flags & TZ_FLAG_GETPROFILE)
798 acpi_tz_power_profile(sc);
799
800 /*
801 * If requested, check for new devices/setpoints. After finding them,
802 * check if we need to switch fans based on the new values.
803 */
804 if (flags & TZ_FLAG_GETSETTINGS) {
805 acpi_tz_establish(sc);
806 acpi_tz_monitor(sc);
807 }
808
809 /* XXX passive cooling actions? */
810 }
811
812 /*
813 * System power profile may have changed; fetch and notify the
814 * thermal zone accordingly.
815 *
816 * Since this can be called from an arbitrary eventhandler, it needs
817 * to get the ACPI lock itself.
818 */
819 static void
820 acpi_tz_power_profile(void *arg)
821 {
822 ACPI_STATUS status;
823 struct acpi_tz_softc *sc = (struct acpi_tz_softc *)arg;
824 int state;
825
826 state = power_profile_get_state();
827 if (state != POWER_PROFILE_PERFORMANCE && state != POWER_PROFILE_ECONOMY)
828 return;
829
830 /* check that we haven't decided there's no _SCP method */
831 if ((sc->tz_flags & TZ_FLAG_NO_SCP) == 0) {
832
833 /* Call _SCP to set the new profile */
834 status = acpi_SetInteger(sc->tz_handle, "_SCP",
835 (state == POWER_PROFILE_PERFORMANCE) ? 0 : 1);
836 if (ACPI_FAILURE(status)) {
837 if (status != AE_NOT_FOUND)
838 ACPI_VPRINT(sc->tz_dev,
839 acpi_device_get_parent_softc(sc->tz_dev),
840 "can't evaluate %s._SCP - %s\n",
841 acpi_name(sc->tz_handle),
842 AcpiFormatException(status));
843 sc->tz_flags |= TZ_FLAG_NO_SCP;
844 } else {
845 /* We have to re-evaluate the entire zone now */
846 acpi_tz_signal(sc, TZ_FLAG_GETSETTINGS);
847 }
848 }
849 }
850
851 /*
852 * Thermal zone monitor thread.
853 */
854 static void
855 acpi_tz_thread(void *arg)
856 {
857 device_t *devs;
858 int devcount, i;
859 int flags;
860 struct acpi_tz_softc **sc;
861
862 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
863
864 devs = NULL;
865 devcount = 0;
866 sc = NULL;
867
868 for (;;) {
869 /* If the number of devices has changed, re-evaluate. */
870 if (devclass_get_maxunit(acpi_tz_devclass) != devcount) {
871 if (devs != NULL) {
872 free(devs, M_TEMP);
873 free(sc, M_TEMP);
874 }
875 devclass_get_devices(acpi_tz_devclass, &devs, &devcount);
876 sc = malloc(sizeof(struct acpi_tz_softc *) * devcount, M_TEMP,
877 M_WAITOK | M_ZERO);
878 for (i = 0; i < devcount; i++)
879 sc[i] = device_get_softc(devs[i]);
880 }
881
882 /* Check for temperature events and act on them. */
883 for (i = 0; i < devcount; i++) {
884 ACPI_LOCK(thermal);
885 flags = sc[i]->tz_flags;
886 sc[i]->tz_flags &= TZ_FLAG_NO_SCP;
887 ACPI_UNLOCK(thermal);
888 acpi_tz_timeout(sc[i], flags);
889 }
890
891 /* If more work to do, don't go to sleep yet. */
892 ACPI_LOCK(thermal);
893 for (i = 0; i < devcount; i++) {
894 if (sc[i]->tz_flags & ~TZ_FLAG_NO_SCP)
895 break;
896 }
897
898 /*
899 * If we have no more work, sleep for a while, setting PDROP so that
900 * the mutex will not be reacquired. Otherwise, drop the mutex and
901 * loop to handle more events.
902 */
903 if (i == devcount)
904 msleep(&acpi_tz_proc, &thermal_mutex, PZERO | PDROP, "tzpoll",
905 hz * acpi_tz_polling_rate);
906 else
907 ACPI_UNLOCK(thermal);
908 }
909 }
910
911 static int
912 acpi_tz_cpufreq_restore(struct acpi_tz_softc *sc)
913 {
914 device_t dev;
915 int error;
916
917 if (!sc->tz_cooling_updated)
918 return (0);
919 if ((dev = devclass_get_device(devclass_find("cpufreq"), 0)) == NULL)
920 return (ENXIO);
921 ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev),
922 "temperature %d.%dC: resuming previous clock speed (%d MHz)\n",
923 TZ_KELVTOC(sc->tz_temperature), sc->tz_cooling_saved_freq);
924 error = CPUFREQ_SET(dev, NULL, CPUFREQ_PRIO_KERN);
925 if (error == 0)
926 sc->tz_cooling_updated = FALSE;
927 return (error);
928 }
929
930 static int
931 acpi_tz_cpufreq_update(struct acpi_tz_softc *sc, int req)
932 {
933 device_t dev;
934 struct cf_level *levels;
935 int num_levels, error, freq, desired_freq, perf, i;
936
937 levels = malloc(CPUFREQ_MAX_LEVELS * sizeof(*levels), M_TEMP, M_NOWAIT);
938 if (levels == NULL)
939 return (ENOMEM);
940
941 /*
942 * Find the main device, cpufreq0. We don't yet support independent
943 * CPU frequency control on SMP.
944 */
945 if ((dev = devclass_get_device(devclass_find("cpufreq"), 0)) == NULL) {
946 error = ENXIO;
947 goto out;
948 }
949
950 /* Get the current frequency. */
951 error = CPUFREQ_GET(dev, &levels[0]);
952 if (error)
953 goto out;
954 freq = levels[0].total_set.freq;
955
956 /* Get the current available frequency levels. */
957 num_levels = CPUFREQ_MAX_LEVELS;
958 error = CPUFREQ_LEVELS(dev, levels, &num_levels);
959 if (error) {
960 if (error == E2BIG)
961 printf("cpufreq: need to increase CPUFREQ_MAX_LEVELS\n");
962 goto out;
963 }
964
965 /* Calculate the desired frequency as a percent of the max frequency. */
966 perf = 100 * freq / levels[0].total_set.freq - req;
967 if (perf < 0)
968 perf = 0;
969 else if (perf > 100)
970 perf = 100;
971 desired_freq = levels[0].total_set.freq * perf / 100;
972
973 if (desired_freq < freq) {
974 /* Find the closest available frequency, rounding down. */
975 for (i = 0; i < num_levels; i++)
976 if (levels[i].total_set.freq <= desired_freq)
977 break;
978
979 /* If we didn't find a relevant setting, use the lowest. */
980 if (i == num_levels)
981 i--;
982 } else {
983 /* If we didn't decrease frequency yet, don't increase it. */
984 if (!sc->tz_cooling_updated) {
985 sc->tz_cooling_active = FALSE;
986 goto out;
987 }
988
989 /* Use saved cpu frequency as maximum value. */
990 if (desired_freq > sc->tz_cooling_saved_freq)
991 desired_freq = sc->tz_cooling_saved_freq;
992
993 /* Find the closest available frequency, rounding up. */
994 for (i = num_levels - 1; i >= 0; i--)
995 if (levels[i].total_set.freq >= desired_freq)
996 break;
997
998 /* If we didn't find a relevant setting, use the highest. */
999 if (i == -1)
1000 i++;
1001
1002 /* If we're going to the highest frequency, restore the old setting. */
1003 if (i == 0 || desired_freq == sc->tz_cooling_saved_freq) {
1004 error = acpi_tz_cpufreq_restore(sc);
1005 if (error == 0)
1006 sc->tz_cooling_active = FALSE;
1007 goto out;
1008 }
1009 }
1010
1011 /* If we are going to a new frequency, activate it. */
1012 if (levels[i].total_set.freq != freq) {
1013 ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev),
1014 "temperature %d.%dC: %screasing clock speed "
1015 "from %d MHz to %d MHz\n",
1016 TZ_KELVTOC(sc->tz_temperature),
1017 (freq > levels[i].total_set.freq) ? "de" : "in",
1018 freq, levels[i].total_set.freq);
1019 error = CPUFREQ_SET(dev, &levels[i], CPUFREQ_PRIO_KERN);
1020 if (error == 0 && !sc->tz_cooling_updated) {
1021 sc->tz_cooling_saved_freq = freq;
1022 sc->tz_cooling_updated = TRUE;
1023 }
1024 }
1025
1026 out:
1027 if (levels)
1028 free(levels, M_TEMP);
1029 return (error);
1030 }
1031
1032 /*
1033 * Passive cooling thread; monitors current temperature according to the
1034 * cooling interval and calculates whether to scale back CPU frequency.
1035 */
1036 static void
1037 acpi_tz_cooling_thread(void *arg)
1038 {
1039 struct acpi_tz_softc *sc;
1040 int error, perf, curr_temp, prev_temp;
1041
1042 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
1043
1044 sc = (struct acpi_tz_softc *)arg;
1045
1046 prev_temp = sc->tz_temperature;
1047 while (sc->tz_cooling_enabled) {
1048 if (sc->tz_cooling_active)
1049 (void)acpi_tz_get_temperature(sc);
1050 curr_temp = sc->tz_temperature;
1051 if (curr_temp >= sc->tz_zone.psv)
1052 sc->tz_cooling_active = TRUE;
1053 if (sc->tz_cooling_active) {
1054 perf = sc->tz_zone.tc1 * (curr_temp - prev_temp) +
1055 sc->tz_zone.tc2 * (curr_temp - sc->tz_zone.psv);
1056 perf /= 10;
1057
1058 if (perf != 0) {
1059 error = acpi_tz_cpufreq_update(sc, perf);
1060
1061 /*
1062 * If error and not simply a higher priority setting was
1063 * active, disable cooling.
1064 */
1065 if (error != 0 && error != EPERM) {
1066 device_printf(sc->tz_dev,
1067 "failed to set new freq, disabling passive cooling\n");
1068 sc->tz_cooling_enabled = FALSE;
1069 }
1070 }
1071 }
1072 prev_temp = curr_temp;
1073 tsleep(&sc->tz_cooling_proc, PZERO, "cooling",
1074 hz * sc->tz_zone.tsp / 10);
1075 }
1076 if (sc->tz_cooling_active) {
1077 acpi_tz_cpufreq_restore(sc);
1078 sc->tz_cooling_active = FALSE;
1079 }
1080 sc->tz_cooling_proc = NULL;
1081 ACPI_LOCK(thermal);
1082 sc->tz_cooling_proc_running = FALSE;
1083 ACPI_UNLOCK(thermal);
1084 kthread_exit(0);
1085 }
1086
1087 /*
1088 * TODO: We ignore _PSL (list of cooling devices) since cpufreq enumerates
1089 * all CPUs for us. However, it's possible in the future _PSL will
1090 * reference non-CPU devices so we may want to support it then.
1091 */
1092 static int
1093 acpi_tz_cooling_is_available(struct acpi_tz_softc *sc)
1094 {
1095 return (sc->tz_zone.tc1 != -1 && sc->tz_zone.tc2 != -1 &&
1096 sc->tz_zone.tsp != -1 && sc->tz_zone.tsp != 0 &&
1097 sc->tz_zone.psv != -1);
1098 }
1099
1100 static int
1101 acpi_tz_cooling_thread_start(struct acpi_tz_softc *sc)
1102 {
1103 int error;
1104 char name[16];
1105
1106 ACPI_LOCK(thermal);
1107 if (sc->tz_cooling_proc_running) {
1108 ACPI_UNLOCK(thermal);
1109 return (0);
1110 }
1111 sc->tz_cooling_proc_running = TRUE;
1112 ACPI_UNLOCK(thermal);
1113 error = 0;
1114 if (sc->tz_cooling_proc == NULL) {
1115 snprintf(name, sizeof(name), "acpi_cooling%d",
1116 device_get_unit(sc->tz_dev));
1117 error = kthread_create(acpi_tz_cooling_thread, sc,
1118 &sc->tz_cooling_proc, RFHIGHPID, 0, name);
1119 if (error != 0) {
1120 device_printf(sc->tz_dev, "could not create thread - %d", error);
1121 ACPI_LOCK(thermal);
1122 sc->tz_cooling_proc_running = FALSE;
1123 ACPI_UNLOCK(thermal);
1124 }
1125 }
1126 return (error);
1127 }
Cache object: 68d3150fa3dbcef29905149f3da31998
|