The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/dev/advansys/advansys.c

Version: -  FREEBSD  -  FREEBSD-13-STABLE  -  FREEBSD-13-0  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  l41  -  OPENBSD  -  linux-2.6  -  MK84  -  PLAN9  -  xnu-8792 
SearchContext: -  none  -  3  -  10 

    1 /*-
    2  * Generic driver for the Advanced Systems Inc. SCSI controllers
    3  * Product specific probe and attach routines can be found in:
    4  * 
    5  * i386/isa/adv_isa.c   ABP5140, ABP542, ABP5150, ABP842, ABP852
    6  * i386/eisa/adv_eisa.c ABP742, ABP752
    7  * pci/adv_pci.c        ABP920, ABP930, ABP930U, ABP930UA, ABP940, ABP940U,
    8  *                      ABP940UA, ABP950, ABP960, ABP960U, ABP960UA,
    9  *                      ABP970, ABP970U
   10  *
   11  * Copyright (c) 1996-2000 Justin Gibbs.
   12  * All rights reserved.
   13  *
   14  * Redistribution and use in source and binary forms, with or without
   15  * modification, are permitted provided that the following conditions
   16  * are met:
   17  * 1. Redistributions of source code must retain the above copyright
   18  *    notice, this list of conditions, and the following disclaimer,
   19  *    without modification, immediately at the beginning of the file.
   20  * 2. The name of the author may not be used to endorse or promote products
   21  *    derived from this software without specific prior written permission.
   22  *
   23  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
   24  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
   25  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
   26  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
   27  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
   28  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
   29  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
   30  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
   31  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
   32  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
   33  * SUCH DAMAGE.
   34  */
   35 /*-
   36  * Ported from:
   37  * advansys.c - Linux Host Driver for AdvanSys SCSI Adapters
   38  *     
   39  * Copyright (c) 1995-1997 Advanced System Products, Inc.
   40  * All Rights Reserved.
   41  *   
   42  * Redistribution and use in source and binary forms, with or without
   43  * modification, are permitted provided that redistributions of source
   44  * code retain the above copyright notice and this comment without
   45  * modification.
   46  */
   47 
   48 #include <sys/cdefs.h>
   49 __FBSDID("$FreeBSD: releng/10.3/sys/dev/advansys/advansys.c 275982 2014-12-21 03:06:11Z smh $");
   50  
   51 #include <sys/param.h>
   52 #include <sys/conf.h>
   53 #include <sys/systm.h>
   54 #include <sys/malloc.h>
   55 #include <sys/kernel.h>
   56 #include <sys/lock.h>
   57 #include <sys/module.h>
   58 #include <sys/mutex.h>
   59 
   60 #include <machine/bus.h>
   61 #include <machine/resource.h>
   62 #include <sys/bus.h> 
   63 #include <sys/rman.h> 
   64 
   65 #include <cam/cam.h>
   66 #include <cam/cam_ccb.h>
   67 #include <cam/cam_sim.h>
   68 #include <cam/cam_xpt_sim.h>
   69 #include <cam/cam_debug.h>
   70 
   71 #include <cam/scsi/scsi_all.h>
   72 #include <cam/scsi/scsi_message.h>
   73 
   74 #include <vm/vm.h>
   75 #include <vm/vm_param.h>
   76 #include <vm/pmap.h>
   77 
   78 #include <dev/advansys/advansys.h>
   79 
   80 static void     adv_action(struct cam_sim *sim, union ccb *ccb);
   81 static void     adv_execute_ccb(void *arg, bus_dma_segment_t *dm_segs,
   82                                 int nsegments, int error);
   83 static void     adv_intr_locked(struct adv_softc *adv);
   84 static void     adv_poll(struct cam_sim *sim);
   85 static void     adv_run_doneq(struct adv_softc *adv);
   86 static struct adv_ccb_info *
   87                 adv_alloc_ccb_info(struct adv_softc *adv);
   88 static void     adv_destroy_ccb_info(struct adv_softc *adv,
   89                                      struct adv_ccb_info *cinfo); 
   90 static __inline struct adv_ccb_info *
   91                 adv_get_ccb_info(struct adv_softc *adv);
   92 static __inline void adv_free_ccb_info(struct adv_softc *adv,
   93                                        struct adv_ccb_info *cinfo);
   94 static __inline void adv_set_state(struct adv_softc *adv, adv_state state);
   95 static __inline void adv_clear_state(struct adv_softc *adv, union ccb* ccb);
   96 static void adv_clear_state_really(struct adv_softc *adv, union ccb* ccb);
   97 
   98 static __inline struct adv_ccb_info *
   99 adv_get_ccb_info(struct adv_softc *adv)
  100 {
  101         struct adv_ccb_info *cinfo;
  102 
  103         if (!dumping)
  104                 mtx_assert(&adv->lock, MA_OWNED);
  105         if ((cinfo = SLIST_FIRST(&adv->free_ccb_infos)) != NULL) {
  106                 SLIST_REMOVE_HEAD(&adv->free_ccb_infos, links);
  107         } else {
  108                 cinfo = adv_alloc_ccb_info(adv);
  109         }
  110 
  111         return (cinfo);
  112 }
  113 
  114 static __inline void
  115 adv_free_ccb_info(struct adv_softc *adv, struct adv_ccb_info *cinfo)
  116 {       
  117 
  118         if (!dumping)
  119                 mtx_assert(&adv->lock, MA_OWNED);
  120         cinfo->state = ACCB_FREE;
  121         SLIST_INSERT_HEAD(&adv->free_ccb_infos, cinfo, links);
  122 }
  123 
  124 static __inline void
  125 adv_set_state(struct adv_softc *adv, adv_state state)
  126 {
  127         if (adv->state == 0)
  128                 xpt_freeze_simq(adv->sim, /*count*/1);
  129         adv->state |= state;
  130 }
  131 
  132 static __inline void
  133 adv_clear_state(struct adv_softc *adv, union ccb* ccb)
  134 {
  135         if (adv->state != 0)
  136                 adv_clear_state_really(adv, ccb);
  137 }
  138 
  139 static void
  140 adv_clear_state_really(struct adv_softc *adv, union ccb* ccb)
  141 {
  142 
  143         if (!dumping)
  144                 mtx_assert(&adv->lock, MA_OWNED);
  145         if ((adv->state & ADV_BUSDMA_BLOCK_CLEARED) != 0)
  146                 adv->state &= ~(ADV_BUSDMA_BLOCK_CLEARED|ADV_BUSDMA_BLOCK);
  147         if ((adv->state & ADV_RESOURCE_SHORTAGE) != 0) {
  148                 int openings;
  149 
  150                 openings = adv->max_openings - adv->cur_active - ADV_MIN_FREE_Q;
  151                 if (openings >= adv->openings_needed) {
  152                         adv->state &= ~ADV_RESOURCE_SHORTAGE;
  153                         adv->openings_needed = 0;
  154                 }
  155         }
  156                 
  157         if ((adv->state & ADV_IN_TIMEOUT) != 0) {
  158                 struct adv_ccb_info *cinfo;
  159 
  160                 cinfo = (struct adv_ccb_info *)ccb->ccb_h.ccb_cinfo_ptr;
  161                 if ((cinfo->state & ACCB_RECOVERY_CCB) != 0) {
  162                         struct ccb_hdr *ccb_h;
  163 
  164                         /*
  165                          * We now traverse our list of pending CCBs
  166                          * and reinstate their timeouts.
  167                          */
  168                         ccb_h = LIST_FIRST(&adv->pending_ccbs);
  169                         while (ccb_h != NULL) {
  170                                 cinfo = ccb_h->ccb_cinfo_ptr;
  171                                 callout_reset_sbt(&cinfo->timer,
  172                                     SBT_1MS * ccb_h->timeout, 0,
  173                                     adv_timeout, ccb_h, 0);
  174                                 ccb_h = LIST_NEXT(ccb_h, sim_links.le);
  175                         }
  176                         adv->state &= ~ADV_IN_TIMEOUT;
  177                         device_printf(adv->dev, "No longer in timeout\n");
  178                 }
  179         }
  180         if (adv->state == 0)
  181                 ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
  182 }
  183 
  184 void     
  185 adv_map(void *arg, bus_dma_segment_t *segs, int nseg, int error)
  186 {
  187         bus_addr_t* physaddr;
  188  
  189         physaddr = (bus_addr_t*)arg;
  190         *physaddr = segs->ds_addr;
  191 }
  192 
  193 static void
  194 adv_action(struct cam_sim *sim, union ccb *ccb)
  195 {
  196         struct adv_softc *adv;
  197 
  198         CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("adv_action\n"));
  199 
  200         adv = (struct adv_softc *)cam_sim_softc(sim);
  201         mtx_assert(&adv->lock, MA_OWNED);
  202 
  203         switch (ccb->ccb_h.func_code) {
  204         /* Common cases first */
  205         case XPT_SCSI_IO:       /* Execute the requested I/O operation */
  206         {
  207                 struct  ccb_hdr *ccb_h;
  208                 struct  ccb_scsiio *csio;
  209                 struct  adv_ccb_info *cinfo;
  210                 int error;
  211 
  212                 ccb_h = &ccb->ccb_h;
  213                 csio = &ccb->csio;
  214                 cinfo = adv_get_ccb_info(adv);
  215                 if (cinfo == NULL)
  216                         panic("XXX Handle CCB info error!!!");
  217 
  218                 ccb_h->ccb_cinfo_ptr = cinfo;
  219                 cinfo->ccb = ccb;
  220 
  221                 error = bus_dmamap_load_ccb(adv->buffer_dmat,
  222                                             cinfo->dmamap,
  223                                             ccb,
  224                                             adv_execute_ccb,
  225                                             csio, /*flags*/0);
  226                 if (error == EINPROGRESS) {
  227                         /*
  228                          * So as to maintain ordering, freeze the controller
  229                          * queue until our mapping is returned.
  230                          */
  231                         adv_set_state(adv, ADV_BUSDMA_BLOCK);
  232                 }
  233                 break;
  234         }
  235         case XPT_RESET_DEV:     /* Bus Device Reset the specified SCSI device */
  236         case XPT_TARGET_IO:     /* Execute target I/O request */
  237         case XPT_ACCEPT_TARGET_IO:      /* Accept Host Target Mode CDB */
  238         case XPT_CONT_TARGET_IO:        /* Continue Host Target I/O Connection*/
  239         case XPT_EN_LUN:                /* Enable LUN as a target */
  240         case XPT_ABORT:                 /* Abort the specified CCB */
  241                 /* XXX Implement */
  242                 ccb->ccb_h.status = CAM_REQ_INVALID;
  243                 xpt_done(ccb);
  244                 break;
  245 #define IS_CURRENT_SETTINGS(c)  (c->type == CTS_TYPE_CURRENT_SETTINGS)
  246 #define IS_USER_SETTINGS(c)     (c->type == CTS_TYPE_USER_SETTINGS)
  247         case XPT_SET_TRAN_SETTINGS:
  248         {
  249                 struct ccb_trans_settings_scsi *scsi;
  250                 struct ccb_trans_settings_spi *spi;
  251                 struct   ccb_trans_settings *cts;
  252                 target_bit_vector targ_mask;
  253                 struct adv_transinfo *tconf;
  254                 u_int    update_type;
  255 
  256                 cts = &ccb->cts;
  257                 targ_mask = ADV_TID_TO_TARGET_MASK(cts->ccb_h.target_id);
  258                 update_type = 0;
  259 
  260                 /*
  261                  * The user must specify which type of settings he wishes
  262                  * to change.
  263                  */
  264                 if (IS_CURRENT_SETTINGS(cts) && !IS_USER_SETTINGS(cts)) {
  265                         tconf = &adv->tinfo[cts->ccb_h.target_id].current;
  266                         update_type |= ADV_TRANS_GOAL;
  267                 } else if (IS_USER_SETTINGS(cts) && !IS_CURRENT_SETTINGS(cts)) {
  268                         tconf = &adv->tinfo[cts->ccb_h.target_id].user;
  269                         update_type |= ADV_TRANS_USER;
  270                 } else {
  271                         ccb->ccb_h.status = CAM_REQ_INVALID;
  272                         break;
  273                 }
  274                 
  275                 scsi = &cts->proto_specific.scsi;
  276                 spi = &cts->xport_specific.spi;
  277                 if ((update_type & ADV_TRANS_GOAL) != 0) {
  278                         if ((spi->valid & CTS_SPI_VALID_DISC) != 0) {
  279                                 if ((spi->flags & CTS_SPI_FLAGS_DISC_ENB) != 0)
  280                                         adv->disc_enable |= targ_mask;
  281                                 else
  282                                         adv->disc_enable &= ~targ_mask;
  283                                 adv_write_lram_8(adv, ADVV_DISC_ENABLE_B,
  284                                                  adv->disc_enable); 
  285                         }
  286 
  287                         if ((scsi->valid & CTS_SCSI_VALID_TQ) != 0) {
  288                                 if ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0)
  289                                         adv->cmd_qng_enabled |= targ_mask;
  290                                 else
  291                                         adv->cmd_qng_enabled &= ~targ_mask;
  292                         }
  293                 }
  294 
  295                 if ((update_type & ADV_TRANS_USER) != 0) {
  296                         if ((spi->valid & CTS_SPI_VALID_DISC) != 0) {
  297                                 if ((spi->flags & CTS_SPI_VALID_DISC) != 0)
  298                                         adv->user_disc_enable |= targ_mask;
  299                                 else
  300                                         adv->user_disc_enable &= ~targ_mask;
  301                         }
  302 
  303                         if ((scsi->valid & CTS_SCSI_VALID_TQ) != 0) {
  304                                 if ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0)
  305                                         adv->user_cmd_qng_enabled |= targ_mask;
  306                                 else
  307                                         adv->user_cmd_qng_enabled &= ~targ_mask;
  308                         }
  309                 }
  310                 
  311                 /*
  312                  * If the user specifies either the sync rate, or offset,
  313                  * but not both, the unspecified parameter defaults to its
  314                  * current value in transfer negotiations.
  315                  */
  316                 if (((spi->valid & CTS_SPI_VALID_SYNC_RATE) != 0)
  317                  || ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0)) {
  318                         /*
  319                          * If the user provided a sync rate but no offset,
  320                          * use the current offset.
  321                          */
  322                         if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) == 0)
  323                                 spi->sync_offset = tconf->offset;
  324 
  325                         /*
  326                          * If the user provided an offset but no sync rate,
  327                          * use the current sync rate.
  328                          */
  329                         if ((spi->valid & CTS_SPI_VALID_SYNC_RATE) == 0)
  330                                 spi->sync_period = tconf->period;
  331 
  332                         adv_period_offset_to_sdtr(adv, &spi->sync_period,
  333                                                   &spi->sync_offset,
  334                                                   cts->ccb_h.target_id);
  335                         
  336                         adv_set_syncrate(adv, /*struct cam_path */NULL,
  337                                          cts->ccb_h.target_id, spi->sync_period,
  338                                          spi->sync_offset, update_type);
  339                 }
  340 
  341                 ccb->ccb_h.status = CAM_REQ_CMP;
  342                 xpt_done(ccb);
  343                 break;
  344         }
  345         case XPT_GET_TRAN_SETTINGS:
  346         /* Get default/user set transfer settings for the target */
  347         {
  348                 struct ccb_trans_settings_scsi *scsi;
  349                 struct ccb_trans_settings_spi *spi;
  350                 struct ccb_trans_settings *cts;
  351                 struct adv_transinfo *tconf;
  352                 target_bit_vector target_mask;
  353 
  354                 cts = &ccb->cts;
  355                 target_mask = ADV_TID_TO_TARGET_MASK(cts->ccb_h.target_id);
  356 
  357                 scsi = &cts->proto_specific.scsi;
  358                 spi = &cts->xport_specific.spi;
  359 
  360                 cts->protocol = PROTO_SCSI;
  361                 cts->protocol_version = SCSI_REV_2;
  362                 cts->transport = XPORT_SPI;
  363                 cts->transport_version = 2;
  364 
  365                 scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB;
  366                 spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB;
  367 
  368                 if (cts->type == CTS_TYPE_CURRENT_SETTINGS) {
  369                         tconf = &adv->tinfo[cts->ccb_h.target_id].current;
  370                         if ((adv->disc_enable & target_mask) != 0)
  371                                 spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
  372                         if ((adv->cmd_qng_enabled & target_mask) != 0)
  373                                 scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
  374                 } else {
  375                         tconf = &adv->tinfo[cts->ccb_h.target_id].user;
  376                         if ((adv->user_disc_enable & target_mask) != 0)
  377                                 spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
  378                         if ((adv->user_cmd_qng_enabled & target_mask) != 0)
  379                                 scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
  380                 }
  381                 spi->sync_period = tconf->period;
  382                 spi->sync_offset = tconf->offset;
  383                 spi->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
  384                 spi->valid = CTS_SPI_VALID_SYNC_RATE
  385                            | CTS_SPI_VALID_SYNC_OFFSET
  386                            | CTS_SPI_VALID_BUS_WIDTH
  387                            | CTS_SPI_VALID_DISC;
  388                 scsi->valid = CTS_SCSI_VALID_TQ;
  389                 ccb->ccb_h.status = CAM_REQ_CMP;
  390                 xpt_done(ccb);
  391                 break;
  392         }
  393         case XPT_CALC_GEOMETRY:
  394         {
  395                 int       extended;
  396 
  397                 extended = (adv->control & ADV_CNTL_BIOS_GT_1GB) != 0;
  398                 cam_calc_geometry(&ccb->ccg, extended); 
  399                 xpt_done(ccb);
  400                 break;
  401         }
  402         case XPT_RESET_BUS:             /* Reset the specified SCSI bus */
  403         {
  404 
  405                 adv_stop_execution(adv);
  406                 adv_reset_bus(adv, /*initiate_reset*/TRUE);
  407                 adv_start_execution(adv);
  408 
  409                 ccb->ccb_h.status = CAM_REQ_CMP;
  410                 xpt_done(ccb);
  411                 break;
  412         }
  413         case XPT_TERM_IO:               /* Terminate the I/O process */
  414                 /* XXX Implement */
  415                 ccb->ccb_h.status = CAM_REQ_INVALID;
  416                 xpt_done(ccb);
  417                 break;
  418         case XPT_PATH_INQ:              /* Path routing inquiry */
  419         {
  420                 struct ccb_pathinq *cpi = &ccb->cpi;
  421                 
  422                 cpi->version_num = 1; /* XXX??? */
  423                 cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE;
  424                 cpi->target_sprt = 0;
  425                 cpi->hba_misc = 0;
  426                 cpi->hba_eng_cnt = 0;
  427                 cpi->max_target = 7;
  428                 cpi->max_lun = 7;
  429                 cpi->initiator_id = adv->scsi_id;
  430                 cpi->bus_id = cam_sim_bus(sim);
  431                 cpi->base_transfer_speed = 3300;
  432                 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
  433                 strncpy(cpi->hba_vid, "Advansys", HBA_IDLEN);
  434                 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
  435                 cpi->unit_number = cam_sim_unit(sim);
  436                 cpi->ccb_h.status = CAM_REQ_CMP;
  437                 cpi->transport = XPORT_SPI;
  438                 cpi->transport_version = 2;
  439                 cpi->protocol = PROTO_SCSI;
  440                 cpi->protocol_version = SCSI_REV_2;
  441                 xpt_done(ccb);
  442                 break;
  443         }
  444         default:
  445                 ccb->ccb_h.status = CAM_REQ_INVALID;
  446                 xpt_done(ccb);
  447                 break;
  448         }
  449 }
  450 
  451 /*
  452  * Currently, the output of bus_dmammap_load suits our needs just
  453  * fine, but should it change, we'd need to do something here.
  454  */
  455 #define adv_fixup_dmasegs(adv, dm_segs) (struct adv_sg_entry *)(dm_segs)
  456 
  457 static void
  458 adv_execute_ccb(void *arg, bus_dma_segment_t *dm_segs,
  459                 int nsegments, int error)
  460 {
  461         struct  ccb_scsiio *csio;
  462         struct  ccb_hdr *ccb_h;
  463         struct  cam_sim *sim;
  464         struct  adv_softc *adv;
  465         struct  adv_ccb_info *cinfo;
  466         struct  adv_scsi_q scsiq;
  467         struct  adv_sg_head sghead;
  468 
  469         csio = (struct ccb_scsiio *)arg;
  470         ccb_h = &csio->ccb_h;
  471         sim = xpt_path_sim(ccb_h->path);
  472         adv = (struct adv_softc *)cam_sim_softc(sim);
  473         cinfo = (struct adv_ccb_info *)csio->ccb_h.ccb_cinfo_ptr;
  474         if (!dumping)
  475                 mtx_assert(&adv->lock, MA_OWNED);
  476 
  477         /*
  478          * Setup our done routine to release the simq on
  479          * the next ccb that completes.
  480          */
  481         if ((adv->state & ADV_BUSDMA_BLOCK) != 0)
  482                 adv->state |= ADV_BUSDMA_BLOCK_CLEARED;
  483 
  484         if ((ccb_h->flags & CAM_CDB_POINTER) != 0) {
  485                 if ((ccb_h->flags & CAM_CDB_PHYS) == 0) {
  486                         /* XXX Need phystovirt!!!! */
  487                         /* How about pmap_kenter??? */
  488                         scsiq.cdbptr = csio->cdb_io.cdb_ptr;
  489                 } else {
  490                         scsiq.cdbptr = csio->cdb_io.cdb_ptr;
  491                 }
  492         } else {
  493                 scsiq.cdbptr = csio->cdb_io.cdb_bytes;
  494         }
  495         /*
  496          * Build up the request
  497          */
  498         scsiq.q1.status = 0;
  499         scsiq.q1.q_no = 0;
  500         scsiq.q1.cntl = 0;
  501         scsiq.q1.sg_queue_cnt = 0;
  502         scsiq.q1.target_id = ADV_TID_TO_TARGET_MASK(ccb_h->target_id);
  503         scsiq.q1.target_lun = ccb_h->target_lun;
  504         scsiq.q1.sense_len = csio->sense_len;
  505         scsiq.q1.extra_bytes = 0;
  506         scsiq.q2.ccb_index = cinfo - adv->ccb_infos;
  507         scsiq.q2.target_ix = ADV_TIDLUN_TO_IX(ccb_h->target_id,
  508                                               ccb_h->target_lun);
  509         scsiq.q2.flag = 0;
  510         scsiq.q2.cdb_len = csio->cdb_len;
  511         if ((ccb_h->flags & CAM_TAG_ACTION_VALID) != 0)
  512                 scsiq.q2.tag_code = csio->tag_action;
  513         else
  514                 scsiq.q2.tag_code = 0;
  515         scsiq.q2.vm_id = 0;
  516 
  517         if (nsegments != 0) {
  518                 bus_dmasync_op_t op;
  519 
  520                 scsiq.q1.data_addr = dm_segs->ds_addr;
  521                 scsiq.q1.data_cnt = dm_segs->ds_len;
  522                 if (nsegments > 1) {
  523                         scsiq.q1.cntl |= QC_SG_HEAD;
  524                         sghead.entry_cnt
  525                             = sghead.entry_to_copy
  526                             = nsegments;
  527                         sghead.res = 0;
  528                         sghead.sg_list = adv_fixup_dmasegs(adv, dm_segs);
  529                         scsiq.sg_head = &sghead;
  530                 } else {
  531                         scsiq.sg_head = NULL;
  532                 }
  533                 if ((ccb_h->flags & CAM_DIR_MASK) == CAM_DIR_IN)
  534                         op = BUS_DMASYNC_PREREAD;
  535                 else
  536                         op = BUS_DMASYNC_PREWRITE;
  537                 bus_dmamap_sync(adv->buffer_dmat, cinfo->dmamap, op);
  538         } else {
  539                 scsiq.q1.data_addr = 0; 
  540                 scsiq.q1.data_cnt = 0;
  541                 scsiq.sg_head = NULL;
  542         }
  543 
  544         /*
  545          * Last time we need to check if this SCB needs to
  546          * be aborted.
  547          */             
  548         if (ccb_h->status != CAM_REQ_INPROG) {
  549                 if (nsegments != 0)
  550                         bus_dmamap_unload(adv->buffer_dmat, cinfo->dmamap);
  551                 adv_clear_state(adv, (union ccb *)csio);
  552                 adv_free_ccb_info(adv, cinfo);
  553                 xpt_done((union ccb *)csio);
  554                 return;
  555         }
  556 
  557         if (adv_execute_scsi_queue(adv, &scsiq, csio->dxfer_len) != 0) {
  558                 /* Temporary resource shortage */
  559                 adv_set_state(adv, ADV_RESOURCE_SHORTAGE);
  560                 if (nsegments != 0)
  561                         bus_dmamap_unload(adv->buffer_dmat, cinfo->dmamap);
  562                 csio->ccb_h.status = CAM_REQUEUE_REQ;
  563                 adv_clear_state(adv, (union ccb *)csio);
  564                 adv_free_ccb_info(adv, cinfo);
  565                 xpt_done((union ccb *)csio);
  566                 return;
  567         }
  568         cinfo->state |= ACCB_ACTIVE;
  569         ccb_h->status |= CAM_SIM_QUEUED;
  570         LIST_INSERT_HEAD(&adv->pending_ccbs, ccb_h, sim_links.le);
  571         /* Schedule our timeout */
  572         callout_reset_sbt(&cinfo->timer, SBT_1MS * ccb_h->timeout, 0,
  573             adv_timeout, csio, 0);
  574 }
  575 
  576 static struct adv_ccb_info *
  577 adv_alloc_ccb_info(struct adv_softc *adv)
  578 {
  579         int error;
  580         struct adv_ccb_info *cinfo;
  581 
  582         cinfo = &adv->ccb_infos[adv->ccb_infos_allocated];
  583         cinfo->state = ACCB_FREE;
  584         callout_init_mtx(&cinfo->timer, &adv->lock, 0);
  585         error = bus_dmamap_create(adv->buffer_dmat, /*flags*/0,
  586                                   &cinfo->dmamap);
  587         if (error != 0) {
  588                 device_printf(adv->dev, "Unable to allocate CCB info "
  589                     "dmamap - error %d\n", error);
  590                 return (NULL);
  591         }
  592         adv->ccb_infos_allocated++;
  593         return (cinfo);
  594 }
  595 
  596 static void
  597 adv_destroy_ccb_info(struct adv_softc *adv, struct adv_ccb_info *cinfo)
  598 {
  599 
  600         callout_drain(&cinfo->timer);
  601         bus_dmamap_destroy(adv->buffer_dmat, cinfo->dmamap);
  602 }
  603 
  604 void
  605 adv_timeout(void *arg)
  606 {
  607         union ccb *ccb;
  608         struct adv_softc *adv;
  609         struct adv_ccb_info *cinfo, *cinfo2;
  610 
  611         ccb = (union ccb *)arg;
  612         adv = (struct adv_softc *)xpt_path_sim(ccb->ccb_h.path)->softc;
  613         cinfo = (struct adv_ccb_info *)ccb->ccb_h.ccb_cinfo_ptr;
  614         mtx_assert(&adv->lock, MA_OWNED);
  615 
  616         xpt_print_path(ccb->ccb_h.path);
  617         printf("Timed out\n");
  618 
  619         /* Have we been taken care of already?? */
  620         if (cinfo == NULL || cinfo->state == ACCB_FREE) {
  621                 return;
  622         }
  623 
  624         adv_stop_execution(adv);
  625 
  626         if ((cinfo->state & ACCB_ABORT_QUEUED) == 0) {
  627                 struct ccb_hdr *ccb_h;
  628 
  629                 /*
  630                  * In order to simplify the recovery process, we ask the XPT
  631                  * layer to halt the queue of new transactions and we traverse
  632                  * the list of pending CCBs and remove their timeouts. This
  633                  * means that the driver attempts to clear only one error
  634                  * condition at a time.  In general, timeouts that occur
  635                  * close together are related anyway, so there is no benefit
  636                  * in attempting to handle errors in parrallel.  Timeouts will
  637                  * be reinstated when the recovery process ends.
  638                  */
  639                 adv_set_state(adv, ADV_IN_TIMEOUT);
  640 
  641                 /* This CCB is the CCB representing our recovery actions */
  642                 cinfo->state |= ACCB_RECOVERY_CCB|ACCB_ABORT_QUEUED;
  643 
  644                 ccb_h = LIST_FIRST(&adv->pending_ccbs);
  645                 while (ccb_h != NULL) {
  646                         cinfo2 = ccb_h->ccb_cinfo_ptr;
  647                         callout_stop(&cinfo2->timer);
  648                         ccb_h = LIST_NEXT(ccb_h, sim_links.le);
  649                 }
  650 
  651                 /* XXX Should send a BDR */
  652                 /* Attempt an abort as our first tact */
  653                 xpt_print_path(ccb->ccb_h.path);
  654                 printf("Attempting abort\n");
  655                 adv_abort_ccb(adv, ccb->ccb_h.target_id,
  656                               ccb->ccb_h.target_lun, ccb,
  657                               CAM_CMD_TIMEOUT, /*queued_only*/FALSE);
  658                 callout_reset(&cinfo->timer, 2 * hz, adv_timeout, ccb);
  659         } else {
  660                 /* Our attempt to perform an abort failed, go for a reset */
  661                 xpt_print_path(ccb->ccb_h.path);
  662                 printf("Resetting bus\n");              
  663                 ccb->ccb_h.status &= ~CAM_STATUS_MASK;
  664                 ccb->ccb_h.status |= CAM_CMD_TIMEOUT;
  665                 adv_reset_bus(adv, /*initiate_reset*/TRUE);
  666         }
  667         adv_start_execution(adv);
  668 }
  669 
  670 struct adv_softc *
  671 adv_alloc(device_t dev, struct resource *res, long offset)
  672 {
  673         struct adv_softc *adv = device_get_softc(dev);
  674 
  675         /*
  676          * Allocate a storage area for us
  677          */
  678         LIST_INIT(&adv->pending_ccbs);
  679         SLIST_INIT(&adv->free_ccb_infos);
  680         adv->dev = dev;
  681         adv->res = res;
  682         adv->reg_off = offset;
  683         mtx_init(&adv->lock, "adv", NULL, MTX_DEF);
  684 
  685         return(adv);
  686 }
  687 
  688 void
  689 adv_free(struct adv_softc *adv)
  690 {
  691         switch (adv->init_level) {
  692         case 6:
  693         {
  694                 struct adv_ccb_info *cinfo;
  695 
  696                 while ((cinfo = SLIST_FIRST(&adv->free_ccb_infos)) != NULL) {
  697                         SLIST_REMOVE_HEAD(&adv->free_ccb_infos, links);
  698                         adv_destroy_ccb_info(adv, cinfo);       
  699                 }
  700                 
  701                 bus_dmamap_unload(adv->sense_dmat, adv->sense_dmamap);
  702         }
  703         case 5:
  704                 bus_dmamem_free(adv->sense_dmat, adv->sense_buffers,
  705                                 adv->sense_dmamap);
  706         case 4:
  707                 bus_dma_tag_destroy(adv->sense_dmat);
  708         case 3:
  709                 bus_dma_tag_destroy(adv->buffer_dmat);
  710         case 2:
  711                 bus_dma_tag_destroy(adv->parent_dmat);
  712         case 1:
  713                 if (adv->ccb_infos != NULL)
  714                         free(adv->ccb_infos, M_DEVBUF);
  715         case 0:
  716                 mtx_destroy(&adv->lock);
  717                 break;
  718         }
  719 }
  720 
  721 int
  722 adv_init(struct adv_softc *adv)
  723 {
  724         struct    adv_eeprom_config eeprom_config;
  725         int       checksum, i;
  726         int       max_sync;
  727         u_int16_t config_lsw;
  728         u_int16_t config_msw;
  729 
  730         mtx_lock(&adv->lock);
  731         adv_lib_init(adv);
  732 
  733         /*
  734          * Stop script execution.
  735          */  
  736         adv_write_lram_16(adv, ADV_HALTCODE_W, 0x00FE);
  737         adv_stop_execution(adv);
  738         if (adv_stop_chip(adv) == 0 || adv_is_chip_halted(adv) == 0) {
  739                 mtx_unlock(&adv->lock);
  740                 device_printf(adv->dev,
  741                     "Unable to halt adapter. Initialization failed\n");
  742                 return (1);
  743         }
  744         ADV_OUTW(adv, ADV_REG_PROG_COUNTER, ADV_MCODE_START_ADDR);
  745         if (ADV_INW(adv, ADV_REG_PROG_COUNTER) != ADV_MCODE_START_ADDR) {
  746                 mtx_unlock(&adv->lock);
  747                 device_printf(adv->dev,
  748                     "Unable to set program counter. Initialization failed\n");
  749                 return (1);
  750         }
  751 
  752         config_msw = ADV_INW(adv, ADV_CONFIG_MSW);
  753         config_lsw = ADV_INW(adv, ADV_CONFIG_LSW);
  754 
  755         if ((config_msw & ADV_CFG_MSW_CLR_MASK) != 0) {
  756                 config_msw &= ~ADV_CFG_MSW_CLR_MASK;
  757                 /*
  758                  * XXX The Linux code flags this as an error,
  759                  * but what should we report to the user???
  760                  * It seems that clearing the config register
  761                  * makes this error recoverable.
  762                  */
  763                 ADV_OUTW(adv, ADV_CONFIG_MSW, config_msw);
  764         }
  765 
  766         /* Suck in the configuration from the EEProm */
  767         checksum = adv_get_eeprom_config(adv, &eeprom_config);
  768 
  769         if (ADV_INW(adv, ADV_CHIP_STATUS) & ADV_CSW_AUTO_CONFIG) {
  770                 /*
  771                  * XXX The Linux code sets a warning level for this
  772                  * condition, yet nothing of meaning is printed to
  773                  * the user.  What does this mean???
  774                  */
  775                 if (adv->chip_version == 3) {
  776                         if (eeprom_config.cfg_lsw != config_lsw)
  777                                 eeprom_config.cfg_lsw = config_lsw;
  778                         if (eeprom_config.cfg_msw != config_msw) {
  779                                 eeprom_config.cfg_msw = config_msw;
  780                         }
  781                 }
  782         }
  783         if (checksum == eeprom_config.chksum) {
  784 
  785                 /* Range/Sanity checking */
  786                 if (eeprom_config.max_total_qng < ADV_MIN_TOTAL_QNG) {
  787                         eeprom_config.max_total_qng = ADV_MIN_TOTAL_QNG;
  788                 }
  789                 if (eeprom_config.max_total_qng > ADV_MAX_TOTAL_QNG) {
  790                         eeprom_config.max_total_qng = ADV_MAX_TOTAL_QNG;
  791                 }
  792                 if (eeprom_config.max_tag_qng > eeprom_config.max_total_qng) {
  793                         eeprom_config.max_tag_qng = eeprom_config.max_total_qng;
  794                 }
  795                 if (eeprom_config.max_tag_qng < ADV_MIN_TAG_Q_PER_DVC) {
  796                         eeprom_config.max_tag_qng = ADV_MIN_TAG_Q_PER_DVC;
  797                 }
  798                 adv->max_openings = eeprom_config.max_total_qng;
  799                 adv->user_disc_enable = eeprom_config.disc_enable;
  800                 adv->user_cmd_qng_enabled = eeprom_config.use_cmd_qng;
  801                 adv->isa_dma_speed = EEPROM_DMA_SPEED(eeprom_config);
  802                 adv->scsi_id = EEPROM_SCSIID(eeprom_config) & ADV_MAX_TID;
  803                 EEPROM_SET_SCSIID(eeprom_config, adv->scsi_id);
  804                 adv->control = eeprom_config.cntl;
  805                 for (i = 0; i <= ADV_MAX_TID; i++) {
  806                         u_int8_t sync_data;
  807 
  808                         if ((eeprom_config.init_sdtr & (0x1 << i)) == 0)
  809                                 sync_data = 0;
  810                         else
  811                                 sync_data = eeprom_config.sdtr_data[i];
  812                         adv_sdtr_to_period_offset(adv,
  813                                                   sync_data,
  814                                                   &adv->tinfo[i].user.period,
  815                                                   &adv->tinfo[i].user.offset,
  816                                                   i);
  817                 }
  818                 config_lsw = eeprom_config.cfg_lsw;
  819                 eeprom_config.cfg_msw = config_msw;
  820         } else {
  821                 u_int8_t sync_data;
  822 
  823                 device_printf(adv->dev, "Warning EEPROM Checksum mismatch. "
  824                        "Using default device parameters\n");
  825 
  826                 /* Set reasonable defaults since we can't read the EEPROM */
  827                 adv->isa_dma_speed = /*ADV_DEF_ISA_DMA_SPEED*/1;
  828                 adv->max_openings = ADV_DEF_MAX_TOTAL_QNG;
  829                 adv->disc_enable = TARGET_BIT_VECTOR_SET;
  830                 adv->user_disc_enable = TARGET_BIT_VECTOR_SET;
  831                 adv->cmd_qng_enabled = TARGET_BIT_VECTOR_SET;
  832                 adv->user_cmd_qng_enabled = TARGET_BIT_VECTOR_SET;
  833                 adv->scsi_id = 7;
  834                 adv->control = 0xFFFF;
  835 
  836                 if (adv->chip_version == ADV_CHIP_VER_PCI_ULTRA_3050)
  837                         /* Default to no Ultra to support the 3030 */
  838                         adv->control &= ~ADV_CNTL_SDTR_ENABLE_ULTRA;
  839                 sync_data = ADV_DEF_SDTR_OFFSET | (ADV_DEF_SDTR_INDEX << 4);
  840                 for (i = 0; i <= ADV_MAX_TID; i++) {
  841                         adv_sdtr_to_period_offset(adv, sync_data,
  842                                                   &adv->tinfo[i].user.period,
  843                                                   &adv->tinfo[i].user.offset,
  844                                                   i);
  845                 }
  846                 config_lsw |= ADV_CFG_LSW_SCSI_PARITY_ON;
  847         }
  848         config_msw &= ~ADV_CFG_MSW_CLR_MASK;
  849         config_lsw |= ADV_CFG_LSW_HOST_INT_ON;
  850         if ((adv->type & (ADV_PCI|ADV_ULTRA)) == (ADV_PCI|ADV_ULTRA)
  851          && (adv->control & ADV_CNTL_SDTR_ENABLE_ULTRA) == 0)
  852                 /* 25ns or 10MHz */
  853                 max_sync = 25;
  854         else
  855                 /* Unlimited */
  856                 max_sync = 0;
  857         for (i = 0; i <= ADV_MAX_TID; i++) {
  858                 if (adv->tinfo[i].user.period < max_sync)
  859                         adv->tinfo[i].user.period = max_sync;
  860         }
  861 
  862         if (adv_test_external_lram(adv) == 0) {
  863                 if ((adv->type & (ADV_PCI|ADV_ULTRA)) == (ADV_PCI|ADV_ULTRA)) {
  864                         eeprom_config.max_total_qng =
  865                             ADV_MAX_PCI_ULTRA_INRAM_TOTAL_QNG;
  866                         eeprom_config.max_tag_qng =
  867                             ADV_MAX_PCI_ULTRA_INRAM_TAG_QNG;
  868                 } else {
  869                         eeprom_config.cfg_msw |= 0x0800;
  870                         config_msw |= 0x0800;
  871                         eeprom_config.max_total_qng =
  872                              ADV_MAX_PCI_INRAM_TOTAL_QNG;
  873                         eeprom_config.max_tag_qng = ADV_MAX_INRAM_TAG_QNG;
  874                 }
  875                 adv->max_openings = eeprom_config.max_total_qng;
  876         }
  877         ADV_OUTW(adv, ADV_CONFIG_MSW, config_msw);
  878         ADV_OUTW(adv, ADV_CONFIG_LSW, config_lsw);
  879 #if 0
  880         /*
  881          * Don't write the eeprom data back for now.
  882          * I'd rather not mess up the user's card.  We also don't
  883          * fully sanitize the eeprom settings above for the write-back
  884          * to be 100% correct.
  885          */
  886         if (adv_set_eeprom_config(adv, &eeprom_config) != 0)
  887                 device_printf(adv->dev,
  888                     "WARNING! Failure writing to EEPROM.\n");
  889 #endif
  890 
  891         adv_set_chip_scsiid(adv, adv->scsi_id);
  892         if (adv_init_lram_and_mcode(adv)) {
  893                 mtx_unlock(&adv->lock);
  894                 return (1);
  895         }
  896 
  897         adv->disc_enable = adv->user_disc_enable;
  898 
  899         adv_write_lram_8(adv, ADVV_DISC_ENABLE_B, adv->disc_enable); 
  900         for (i = 0; i <= ADV_MAX_TID; i++) {
  901                 /*
  902                  * Start off in async mode.
  903                  */
  904                 adv_set_syncrate(adv, /*struct cam_path */NULL,
  905                                  i, /*period*/0, /*offset*/0,
  906                                  ADV_TRANS_CUR);
  907                 /*
  908                  * Enable the use of tagged commands on all targets.
  909                  * This allows the kernel driver to make up it's own mind
  910                  * as it sees fit to tag queue instead of having the
  911                  * firmware try and second guess the tag_code settins.
  912                  */
  913                 adv_write_lram_8(adv, ADVV_MAX_DVC_QNG_BEG + i,
  914                                  adv->max_openings);
  915         }
  916         adv_write_lram_8(adv, ADVV_USE_TAGGED_QNG_B, TARGET_BIT_VECTOR_SET);
  917         adv_write_lram_8(adv, ADVV_CAN_TAGGED_QNG_B, TARGET_BIT_VECTOR_SET);
  918         device_printf(adv->dev,
  919             "AdvanSys %s Host Adapter, SCSI ID %d, queue depth %d\n",
  920             (adv->type & ADV_ULTRA) && (max_sync == 0)
  921             ? "Ultra SCSI" : "SCSI",
  922             adv->scsi_id, adv->max_openings);
  923         mtx_unlock(&adv->lock);
  924         return (0);
  925 }
  926 
  927 void
  928 adv_intr(void *arg)
  929 {
  930         struct    adv_softc *adv;
  931 
  932         adv = arg;
  933         mtx_lock(&adv->lock);
  934         adv_intr_locked(adv);
  935         mtx_unlock(&adv->lock);
  936 }
  937 
  938 void
  939 adv_intr_locked(struct adv_softc *adv)
  940 {
  941         u_int16_t chipstat;
  942         u_int16_t saved_ram_addr;
  943         u_int8_t  ctrl_reg;
  944         u_int8_t  saved_ctrl_reg;
  945         u_int8_t  host_flag;
  946 
  947         if (!dumping)
  948                 mtx_assert(&adv->lock, MA_OWNED);
  949         chipstat = ADV_INW(adv, ADV_CHIP_STATUS);
  950 
  951         /* Is it for us? */
  952         if ((chipstat & (ADV_CSW_INT_PENDING|ADV_CSW_SCSI_RESET_LATCH)) == 0)
  953                 return;
  954 
  955         ctrl_reg = ADV_INB(adv, ADV_CHIP_CTRL);
  956         saved_ctrl_reg = ctrl_reg & (~(ADV_CC_SCSI_RESET | ADV_CC_CHIP_RESET |
  957                                        ADV_CC_SINGLE_STEP | ADV_CC_DIAG |
  958                                        ADV_CC_TEST));
  959 
  960         if ((chipstat & (ADV_CSW_SCSI_RESET_LATCH|ADV_CSW_SCSI_RESET_ACTIVE))) {
  961                 device_printf(adv->dev, "Detected Bus Reset\n");
  962                 adv_reset_bus(adv, /*initiate_reset*/FALSE);
  963                 return;
  964         }
  965 
  966         if ((chipstat & ADV_CSW_INT_PENDING) != 0) {
  967                 
  968                 saved_ram_addr = ADV_INW(adv, ADV_LRAM_ADDR);
  969                 host_flag = adv_read_lram_8(adv, ADVV_HOST_FLAG_B);
  970                 adv_write_lram_8(adv, ADVV_HOST_FLAG_B,
  971                                  host_flag | ADV_HOST_FLAG_IN_ISR);
  972 
  973                 adv_ack_interrupt(adv);
  974                 
  975                 if ((chipstat & ADV_CSW_HALTED) != 0
  976                  && (ctrl_reg & ADV_CC_SINGLE_STEP) != 0) {
  977                         adv_isr_chip_halted(adv);
  978                         saved_ctrl_reg &= ~ADV_CC_HALT;
  979                 } else {
  980                         adv_run_doneq(adv);
  981                 }
  982                 ADV_OUTW(adv, ADV_LRAM_ADDR, saved_ram_addr);
  983 #ifdef DIAGNOSTIC       
  984                 if (ADV_INW(adv, ADV_LRAM_ADDR) != saved_ram_addr)
  985                         panic("adv_intr: Unable to set LRAM addr");
  986 #endif  
  987                 adv_write_lram_8(adv, ADVV_HOST_FLAG_B, host_flag);
  988         }
  989         
  990         ADV_OUTB(adv, ADV_CHIP_CTRL, saved_ctrl_reg);
  991 }
  992 
  993 static void
  994 adv_run_doneq(struct adv_softc *adv)
  995 {
  996         struct adv_q_done_info scsiq;
  997         u_int             doneq_head;
  998         u_int             done_qno;
  999 
 1000         doneq_head = adv_read_lram_16(adv, ADVV_DONE_Q_TAIL_W) & 0xFF;
 1001         done_qno = adv_read_lram_8(adv, ADV_QNO_TO_QADDR(doneq_head)
 1002                                    + ADV_SCSIQ_B_FWD);
 1003         while (done_qno != ADV_QLINK_END) {
 1004                 union ccb* ccb;
 1005                 struct adv_ccb_info *cinfo;
 1006                 u_int done_qaddr;
 1007                 u_int sg_queue_cnt;
 1008                 int   aborted;
 1009 
 1010                 done_qaddr = ADV_QNO_TO_QADDR(done_qno);
 1011 
 1012                 /* Pull status from this request */
 1013                 sg_queue_cnt = adv_copy_lram_doneq(adv, done_qaddr, &scsiq,
 1014                                                    adv->max_dma_count);
 1015 
 1016                 /* Mark it as free */
 1017                 adv_write_lram_8(adv, done_qaddr + ADV_SCSIQ_B_STATUS,
 1018                                  scsiq.q_status & ~(QS_READY|QS_ABORTED));
 1019 
 1020                 /* Process request based on retrieved info */
 1021                 if ((scsiq.cntl & QC_SG_HEAD) != 0) {
 1022                         u_int i;
 1023 
 1024                         /*
 1025                          * S/G based request.  Free all of the queue
 1026                          * structures that contained S/G information.
 1027                          */
 1028                         for (i = 0; i < sg_queue_cnt; i++) {
 1029                                 done_qno = adv_read_lram_8(adv, done_qaddr
 1030                                                            + ADV_SCSIQ_B_FWD);
 1031 
 1032 #ifdef DIAGNOSTIC                               
 1033                                 if (done_qno == ADV_QLINK_END) {
 1034                                         panic("adv_qdone: Corrupted SG "
 1035                                               "list encountered");
 1036                                 }
 1037 #endif                          
 1038                                 done_qaddr = ADV_QNO_TO_QADDR(done_qno);
 1039 
 1040                                 /* Mark SG queue as free */
 1041                                 adv_write_lram_8(adv, done_qaddr
 1042                                                  + ADV_SCSIQ_B_STATUS, QS_FREE);
 1043                         }
 1044                 } else 
 1045                         sg_queue_cnt = 0;
 1046 #ifdef DIAGNOSTIC
 1047                 if (adv->cur_active < (sg_queue_cnt + 1))
 1048                         panic("adv_qdone: Attempting to free more "
 1049                               "queues than are active");
 1050 #endif          
 1051                 adv->cur_active -= sg_queue_cnt + 1;
 1052 
 1053                 aborted = (scsiq.q_status & QS_ABORTED) != 0;
 1054 
 1055                 if ((scsiq.q_status != QS_DONE)
 1056                  && (scsiq.q_status & QS_ABORTED) == 0)
 1057                         panic("adv_qdone: completed scsiq with unknown status");
 1058 
 1059                 scsiq.remain_bytes += scsiq.extra_bytes;
 1060                         
 1061                 if ((scsiq.d3.done_stat == QD_WITH_ERROR) &&
 1062                     (scsiq.d3.host_stat == QHSTA_M_DATA_OVER_RUN)) {
 1063                         if ((scsiq.cntl & (QC_DATA_IN|QC_DATA_OUT)) == 0) {
 1064                                 scsiq.d3.done_stat = QD_NO_ERROR;
 1065                                 scsiq.d3.host_stat = QHSTA_NO_ERROR;
 1066                         }
 1067                 }
 1068 
 1069                 cinfo = &adv->ccb_infos[scsiq.d2.ccb_index];
 1070                 ccb = cinfo->ccb;
 1071                 ccb->csio.resid = scsiq.remain_bytes;
 1072                 adv_done(adv, ccb,
 1073                          scsiq.d3.done_stat, scsiq.d3.host_stat,
 1074                          scsiq.d3.scsi_stat, scsiq.q_no);
 1075 
 1076                 doneq_head = done_qno;
 1077                 done_qno = adv_read_lram_8(adv, done_qaddr + ADV_SCSIQ_B_FWD);
 1078         }
 1079         adv_write_lram_16(adv, ADVV_DONE_Q_TAIL_W, doneq_head);
 1080 }
 1081 
 1082 
 1083 void
 1084 adv_done(struct adv_softc *adv, union ccb *ccb, u_int done_stat,
 1085          u_int host_stat, u_int scsi_status, u_int q_no)
 1086 {
 1087         struct     adv_ccb_info *cinfo;
 1088 
 1089         if (!dumping)
 1090                 mtx_assert(&adv->lock, MA_OWNED);
 1091         cinfo = (struct adv_ccb_info *)ccb->ccb_h.ccb_cinfo_ptr;
 1092         LIST_REMOVE(&ccb->ccb_h, sim_links.le);
 1093         callout_stop(&cinfo->timer);
 1094         if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
 1095                 bus_dmasync_op_t op;
 1096 
 1097                 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
 1098                         op = BUS_DMASYNC_POSTREAD;
 1099                 else
 1100                         op = BUS_DMASYNC_POSTWRITE;
 1101                 bus_dmamap_sync(adv->buffer_dmat, cinfo->dmamap, op);
 1102                 bus_dmamap_unload(adv->buffer_dmat, cinfo->dmamap);
 1103         }
 1104 
 1105         switch (done_stat) {
 1106         case QD_NO_ERROR:
 1107                 if (host_stat == QHSTA_NO_ERROR) {
 1108                         ccb->ccb_h.status = CAM_REQ_CMP;
 1109                         break;
 1110                 }
 1111                 xpt_print_path(ccb->ccb_h.path);
 1112                 printf("adv_done - queue done without error, "
 1113                        "but host status non-zero(%x)\n", host_stat);
 1114                 /*FALLTHROUGH*/
 1115         case QD_WITH_ERROR:
 1116                 switch (host_stat) {
 1117                 case QHSTA_M_TARGET_STATUS_BUSY:
 1118                 case QHSTA_M_BAD_QUEUE_FULL_OR_BUSY:
 1119                         /*
 1120                          * Assume that if we were a tagged transaction
 1121                          * the target reported queue full.  Otherwise,
 1122                          * report busy.  The firmware really should just
 1123                          * pass the original status back up to us even
 1124                          * if it thinks the target was in error for
 1125                          * returning this status as no other transactions
 1126                          * from this initiator are in effect, but this
 1127                          * ignores multi-initiator setups and there is
 1128                          * evidence that the firmware gets its per-device
 1129                          * transaction counts screwed up occassionally.
 1130                          */
 1131                         ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR;
 1132                         if ((ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) != 0
 1133                          && host_stat != QHSTA_M_TARGET_STATUS_BUSY)
 1134                                 scsi_status = SCSI_STATUS_QUEUE_FULL;
 1135                         else
 1136                                 scsi_status = SCSI_STATUS_BUSY;
 1137                         adv_abort_ccb(adv, ccb->ccb_h.target_id,
 1138                                       ccb->ccb_h.target_lun,
 1139                                       /*ccb*/NULL, CAM_REQUEUE_REQ,
 1140                                       /*queued_only*/TRUE);
 1141                         /*FALLTHROUGH*/
 1142                 case QHSTA_M_NO_AUTO_REQ_SENSE:
 1143                 case QHSTA_NO_ERROR:
 1144                         ccb->csio.scsi_status = scsi_status;
 1145                         switch (scsi_status) {
 1146                         case SCSI_STATUS_CHECK_COND:
 1147                         case SCSI_STATUS_CMD_TERMINATED:
 1148                                 ccb->ccb_h.status |= CAM_AUTOSNS_VALID;
 1149                                 /* Structure copy */
 1150                                 ccb->csio.sense_data =
 1151                                     adv->sense_buffers[q_no - 1];
 1152                                 /* FALLTHROUGH */
 1153                         case SCSI_STATUS_BUSY:
 1154                         case SCSI_STATUS_RESERV_CONFLICT:
 1155                         case SCSI_STATUS_QUEUE_FULL:
 1156                         case SCSI_STATUS_COND_MET:
 1157                         case SCSI_STATUS_INTERMED:
 1158                         case SCSI_STATUS_INTERMED_COND_MET:
 1159                                 ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR;
 1160                                 break;
 1161                         case SCSI_STATUS_OK:
 1162                                 ccb->ccb_h.status |= CAM_REQ_CMP;
 1163                                 break;
 1164                         }
 1165                         break;
 1166                 case QHSTA_M_SEL_TIMEOUT:
 1167                         ccb->ccb_h.status = CAM_SEL_TIMEOUT;
 1168                         break;
 1169                 case QHSTA_M_DATA_OVER_RUN:
 1170                         ccb->ccb_h.status = CAM_DATA_RUN_ERR;
 1171                         break;
 1172                 case QHSTA_M_UNEXPECTED_BUS_FREE:
 1173                         ccb->ccb_h.status = CAM_UNEXP_BUSFREE;
 1174                         break;
 1175                 case QHSTA_M_BAD_BUS_PHASE_SEQ:
 1176                         ccb->ccb_h.status = CAM_SEQUENCE_FAIL;
 1177                         break;
 1178                 case QHSTA_M_BAD_CMPL_STATUS_IN:
 1179                         /* No command complete after a status message */
 1180                         ccb->ccb_h.status = CAM_SEQUENCE_FAIL;
 1181                         break;
 1182                 case QHSTA_D_EXE_SCSI_Q_BUSY_TIMEOUT:
 1183                 case QHSTA_M_WTM_TIMEOUT:
 1184                 case QHSTA_M_HUNG_REQ_SCSI_BUS_RESET:
 1185                         /* The SCSI bus hung in a phase */
 1186                         ccb->ccb_h.status = CAM_SEQUENCE_FAIL;
 1187                         adv_reset_bus(adv, /*initiate_reset*/TRUE);
 1188                         break;
 1189                 case QHSTA_M_AUTO_REQ_SENSE_FAIL:
 1190                         ccb->ccb_h.status = CAM_AUTOSENSE_FAIL;
 1191                         break;
 1192                 case QHSTA_D_QDONE_SG_LIST_CORRUPTED:
 1193                 case QHSTA_D_ASC_DVC_ERROR_CODE_SET:
 1194                 case QHSTA_D_HOST_ABORT_FAILED:
 1195                 case QHSTA_D_EXE_SCSI_Q_FAILED:
 1196                 case QHSTA_D_ASPI_NO_BUF_POOL:
 1197                 case QHSTA_M_BAD_TAG_CODE:
 1198                 case QHSTA_D_LRAM_CMP_ERROR:
 1199                 case QHSTA_M_MICRO_CODE_ERROR_HALT:
 1200                 default:
 1201                         panic("%s: Unhandled Host status error %x",
 1202                             device_get_nameunit(adv->dev), host_stat);
 1203                         /* NOTREACHED */
 1204                 }
 1205                 break;
 1206 
 1207         case QD_ABORTED_BY_HOST:
 1208                 /* Don't clobber any, more explicit, error codes we've set */
 1209                 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG)
 1210                         ccb->ccb_h.status = CAM_REQ_ABORTED;
 1211                 break;
 1212 
 1213         default:
 1214                 xpt_print_path(ccb->ccb_h.path);
 1215                 printf("adv_done - queue done with unknown status %x:%x\n",
 1216                        done_stat, host_stat);
 1217                 ccb->ccb_h.status = CAM_REQ_CMP_ERR;
 1218                 break;
 1219         }
 1220         adv_clear_state(adv, ccb);
 1221         if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP
 1222          && (ccb->ccb_h.status & CAM_DEV_QFRZN) == 0) {
 1223                 xpt_freeze_devq(ccb->ccb_h.path, /*count*/1);
 1224                 ccb->ccb_h.status |= CAM_DEV_QFRZN;
 1225         }
 1226         adv_free_ccb_info(adv, cinfo);
 1227         /*
 1228          * Null this out so that we catch driver bugs that cause a
 1229          * ccb to be completed twice.
 1230          */
 1231         ccb->ccb_h.ccb_cinfo_ptr = NULL;
 1232         ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
 1233         xpt_done(ccb);
 1234 }
 1235 
 1236 /*
 1237  * Function to poll for command completion when
 1238  * interrupts are disabled (crash dumps)
 1239  */
 1240 static void
 1241 adv_poll(struct cam_sim *sim)
 1242 {
 1243 
 1244         adv_intr_locked(cam_sim_softc(sim));
 1245 }
 1246 
 1247 /*
 1248  * Attach all the sub-devices we can find
 1249  */
 1250 int
 1251 adv_attach(adv)
 1252         struct adv_softc *adv;
 1253 {
 1254         struct ccb_setasync csa;
 1255         struct cam_devq *devq;
 1256         int max_sg;
 1257 
 1258         /*
 1259          * Allocate an array of ccb mapping structures.  We put the
 1260          * index of the ccb_info structure into the queue representing
 1261          * a transaction and use it for mapping the queue to the
 1262          * upper level SCSI transaction it represents.
 1263          */
 1264         adv->ccb_infos = malloc(sizeof(*adv->ccb_infos) * adv->max_openings,
 1265                                 M_DEVBUF, M_NOWAIT);
 1266 
 1267         if (adv->ccb_infos == NULL)
 1268                 return (ENOMEM);
 1269 
 1270         adv->init_level++;
 1271                 
 1272         /*
 1273          * Create our DMA tags.  These tags define the kinds of device
 1274          * accessible memory allocations and memory mappings we will 
 1275          * need to perform during normal operation.
 1276          *
 1277          * Unless we need to further restrict the allocation, we rely
 1278          * on the restrictions of the parent dmat, hence the common
 1279          * use of MAXADDR and MAXSIZE.
 1280          *
 1281          * The ASC boards use chains of "queues" (the transactional
 1282          * resources on the board) to represent long S/G lists.
 1283          * The first queue represents the command and holds a
 1284          * single address and data pair.  The queues that follow
 1285          * can each hold ADV_SG_LIST_PER_Q entries.  Given the
 1286          * total number of queues, we can express the largest
 1287          * transaction we can map.  We reserve a few queues for
 1288          * error recovery.  Take those into account as well.
 1289          *
 1290          * There is a way to take an interrupt to download the
 1291          * next batch of S/G entries if there are more than 255
 1292          * of them (the counter in the queue structure is a u_int8_t).
 1293          * We don't use this feature, so limit the S/G list size
 1294          * accordingly.
 1295          */
 1296         max_sg = (adv->max_openings - ADV_MIN_FREE_Q - 1) * ADV_SG_LIST_PER_Q;
 1297         if (max_sg > 255)
 1298                 max_sg = 255;
 1299 
 1300         /* DMA tag for mapping buffers into device visible space. */
 1301         if (bus_dma_tag_create(
 1302                         /* parent       */ adv->parent_dmat,
 1303                         /* alignment    */ 1,
 1304                         /* boundary     */ 0,
 1305                         /* lowaddr      */ BUS_SPACE_MAXADDR,
 1306                         /* highaddr     */ BUS_SPACE_MAXADDR,
 1307                         /* filter       */ NULL,
 1308                         /* filterarg    */ NULL,
 1309                         /* maxsize      */ ADV_MAXPHYS,
 1310                         /* nsegments    */ max_sg,
 1311                         /* maxsegsz     */ BUS_SPACE_MAXSIZE_32BIT,
 1312                         /* flags        */ BUS_DMA_ALLOCNOW,
 1313                         /* lockfunc     */ busdma_lock_mutex,
 1314                         /* lockarg      */ &adv->lock,
 1315                         &adv->buffer_dmat) != 0) {
 1316                 return (ENXIO);
 1317         }
 1318         adv->init_level++;
 1319 
 1320         /* DMA tag for our sense buffers */
 1321         if (bus_dma_tag_create(
 1322                         /* parent       */ adv->parent_dmat,
 1323                         /* alignment    */ 1,
 1324                         /* boundary     */ 0,
 1325                         /* lowaddr      */ BUS_SPACE_MAXADDR,
 1326                         /* highaddr     */ BUS_SPACE_MAXADDR,
 1327                         /* filter       */ NULL,
 1328                         /* filterarg    */ NULL,
 1329                         /* maxsize      */ sizeof(struct scsi_sense_data) *
 1330                                            adv->max_openings,
 1331                         /* nsegments    */ 1,
 1332                         /* maxsegsz     */ BUS_SPACE_MAXSIZE_32BIT,
 1333                         /* flags        */ 0,
 1334                         /* lockfunc     */ busdma_lock_mutex,
 1335                         /* lockarg      */ &adv->lock,
 1336                         &adv->sense_dmat) != 0) {
 1337                 return (ENXIO);
 1338         }
 1339 
 1340         adv->init_level++;
 1341 
 1342         /* Allocation for our sense buffers */
 1343         if (bus_dmamem_alloc(adv->sense_dmat, (void **)&adv->sense_buffers,
 1344                              BUS_DMA_NOWAIT, &adv->sense_dmamap) != 0) {
 1345                 return (ENOMEM);
 1346         }
 1347 
 1348         adv->init_level++;
 1349 
 1350         /* And permanently map them */
 1351         bus_dmamap_load(adv->sense_dmat, adv->sense_dmamap,
 1352                         adv->sense_buffers,
 1353                         sizeof(struct scsi_sense_data)*adv->max_openings,
 1354                         adv_map, &adv->sense_physbase, /*flags*/0);
 1355 
 1356         adv->init_level++;
 1357 
 1358         /*
 1359          * Fire up the chip
 1360          */
 1361         if (adv_start_chip(adv) != 1) {
 1362                 device_printf(adv->dev,
 1363                     "Unable to start on board processor. Aborting.\n");
 1364                 return (ENXIO);
 1365         }
 1366 
 1367         /*
 1368          * Create the device queue for our SIM.
 1369          */
 1370         devq = cam_simq_alloc(adv->max_openings);
 1371         if (devq == NULL)
 1372                 return (ENOMEM);
 1373 
 1374         /*
 1375          * Construct our SIM entry.
 1376          */
 1377         adv->sim = cam_sim_alloc(adv_action, adv_poll, "adv", adv,
 1378             device_get_unit(adv->dev), &adv->lock, 1, adv->max_openings, devq);
 1379         if (adv->sim == NULL)
 1380                 return (ENOMEM);
 1381 
 1382         /*
 1383          * Register the bus.
 1384          *
 1385          * XXX Twin Channel EISA Cards???
 1386          */
 1387         mtx_lock(&adv->lock);
 1388         if (xpt_bus_register(adv->sim, adv->dev, 0) != CAM_SUCCESS) {
 1389                 cam_sim_free(adv->sim, /*free devq*/TRUE);
 1390                 mtx_unlock(&adv->lock);
 1391                 return (ENXIO);
 1392         }
 1393 
 1394         if (xpt_create_path(&adv->path, /*periph*/NULL, cam_sim_path(adv->sim),
 1395                             CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD)
 1396             != CAM_REQ_CMP) {
 1397                 xpt_bus_deregister(cam_sim_path(adv->sim));
 1398                 cam_sim_free(adv->sim, /*free devq*/TRUE);
 1399                 mtx_unlock(&adv->lock);
 1400                 return (ENXIO);
 1401         }
 1402 
 1403         xpt_setup_ccb(&csa.ccb_h, adv->path, /*priority*/5);
 1404         csa.ccb_h.func_code = XPT_SASYNC_CB;
 1405         csa.event_enable = AC_FOUND_DEVICE|AC_LOST_DEVICE;
 1406         csa.callback = advasync;
 1407         csa.callback_arg = adv;
 1408         xpt_action((union ccb *)&csa);
 1409         mtx_unlock(&adv->lock);
 1410         return (0);
 1411 }
 1412 MODULE_DEPEND(adv, cam, 1, 1, 1);

Cache object: 0bef8cd005f71ff387ca783202e2203e


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]


This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.