FreeBSD/Linux Kernel Cross Reference
sys/dev/ae/if_aereg.h

     /*-
      * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
      *
      * Copyright (c) 2008 Stanislav Sedov <stas@FreeBSD.org>.
      * All rights reserved.
      *
      * Redistribution and use in source and binary forms, with or without
      * modification, are permitted provided that the following conditions
      * are met:
     * 1. Redistributions of source code must retain the above copyright
     *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     *
     * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     *
     * $FreeBSD$
     */
    
    /*
     * Master configuration register
     */
    #define AE_MASTER_REG           0x1400
    
    #define AE_MASTER_SOFT_RESET    0x1     /* Reset adapter. */
    #define AE_MASTER_MTIMER_EN     0x2     /* Unknown. */
    #define AE_MASTER_IMT_EN        0x4     /* Interrupt moderation timer enable. */
    #define AE_MASTER_MANUAL_INT    0x8     /* Software manual interrupt. */
    #define AE_MASTER_REVNUM_SHIFT  16      /* Chip revision number. */
    #define AE_MASTER_REVNUM_MASK   0xff
    #define AE_MASTER_DEVID_SHIFT   24      /* PCI device id. */
    #define AE_MASTER_DEVID_MASK    0xff
    
    /*
     * Interrupt status register
     */
    #define AE_ISR_REG              0x1600
    #define AE_ISR_TIMER            0x00000001      /* Counter expired. */
    #define AE_ISR_MANUAL           0x00000002      /* Manual interrupt occuried. */
    #define AE_ISR_RXF_OVERFLOW     0x00000004      /* RxF overflow occuried. */
    #define AE_ISR_TXF_UNDERRUN     0x00000008      /* TxF underrun occuried. */
    #define AE_ISR_TXS_OVERFLOW     0x00000010      /* TxS overflow occuried. */
    #define AE_ISR_RXS_OVERFLOW     0x00000020      /* Internal RxS ring overflow. */
    #define AE_ISR_LINK_CHG         0x00000040      /* Link state changed. */
    #define AE_ISR_TXD_UNDERRUN     0x00000080      /* TxD underrun occuried. */
    #define AE_ISR_RXD_OVERFLOW     0x00000100      /* RxD overflow occuried. */
    #define AE_ISR_DMAR_TIMEOUT     0x00000200      /* DMA read timeout. */
    #define AE_ISR_DMAW_TIMEOUT     0x00000400      /* DMA write timeout. */
    #define AE_ISR_PHY              0x00000800      /* PHY interrupt. */
    #define AE_ISR_TXS_UPDATED      0x00010000      /* Tx status updated. */
    #define AE_ISR_RXD_UPDATED      0x00020000      /* Rx status updated. */
    #define AE_ISR_TX_EARLY         0x00040000      /* TxMAC started transmit. */
    #define AE_ISR_FIFO_UNDERRUN    0x01000000      /* FIFO underrun. */
    #define AE_ISR_FRAME_ERROR      0x02000000      /* Frame receive error. */
    #define AE_ISR_FRAME_SUCCESS    0x04000000      /* Frame receive success. */
    #define AE_ISR_CRC_ERROR        0x08000000      /* CRC error occuried. */
    #define AE_ISR_PHY_LINKDOWN     0x10000000      /* PHY link down. */
    #define AE_ISR_DISABLE          0x80000000      /* Disable interrupts. */
    
    #define AE_ISR_TX_EVENT         (AE_ISR_TXF_UNDERRUN | AE_ISR_TXS_OVERFLOW | \
                                     AE_ISR_TXD_UNDERRUN | AE_ISR_TXS_UPDATED | \
                                     AE_ISR_TX_EARLY)
    #define AE_ISR_RX_EVENT         (AE_ISR_RXF_OVERFLOW | AE_ISR_RXS_OVERFLOW | \
                                     AE_ISR_RXD_OVERFLOW | AE_ISR_RXD_UPDATED)
    
    /* Interrupt mask register. */
    #define AE_IMR_REG              0x1604
    
    #define AE_IMR_DEFAULT          (AE_ISR_DMAR_TIMEOUT | AE_ISR_DMAW_TIMEOUT | \
                                     AE_ISR_PHY_LINKDOWN | \
                                     AE_ISR_TXS_UPDATED | AE_ISR_RXD_UPDATED )
    
    /*
     * Ethernet address register.
     */
    #define AE_EADDR0_REG           0x1488  /* 5 - 2 bytes */
    #define AE_EADDR1_REG           0x148c  /* 1 - 0 bytes */
    
    /*
     * Desriptor rings registers.
     * L2 supports 64-bit addressing but all rings base addresses
     * should have the same high 32 bits of address.
     */
    #define AE_DESC_ADDR_HI_REG     0x1540  /* High 32 bits of ring base address. */
    #define AE_RXD_ADDR_LO_REG      0x1554  /* Low 32 bits of RxD ring address. */
    #define AE_TXD_ADDR_LO_REG      0x1544  /* Low 32 bits of TxD ring address. */
    #define AE_TXS_ADDR_LO_REG      0x154c  /* Low 32 bits of TxS ring address. */
    #define AE_RXD_COUNT_REG        0x1558  /* Number of RxD descriptors in ring.
                                               Should be 120-byte aligned (i.e.
                                              the 'data' field of RxD should
                                              have 128-byte alignment). */
   #define AE_TXD_BUFSIZE_REG      0x1548  /* Size of TxD ring in 4-byte units.
                                              Should be 4-byte aligned. */
   #define AE_TXS_COUNT_REG        0x1550  /* Number of TxS descriptors in ring.
                                              4 byte alignment. */
   #define AE_RXD_COUNT_MIN        16
   #define AE_RXD_COUNT_MAX        512
   #define AE_RXD_COUNT_DEFAULT    64
   /* Padding to align frames on a 128-byte boundary. */
   #define AE_RXD_PADDING          120
   
   #define AE_TXD_BUFSIZE_MIN      4096
   #define AE_TXD_BUFSIZE_MAX      65536
   #define AE_TXD_BUFSIZE_DEFAULT  8192
   
   #define AE_TXS_COUNT_MIN        8       /* Not sure. */
   #define AE_TXS_COUNT_MAX        160
   #define AE_TXS_COUNT_DEFAULT    64      /* AE_TXD_BUFSIZE_DEFAULT / 128 */
   
   /*
    * Inter-frame gap configuration register.
    */
   #define AE_IFG_REG              0x1484
   
   #define AE_IFG_TXIPG_DEFAULT    0x60    /* 96-bit IFG time. */
   #define AE_IFG_TXIPG_SHIFT      0
   #define AE_IFG_TXIPG_MASK       0x7f
   
   #define AE_IFG_RXIPG_DEFAULT    0x50    /* 80-bit IFG time. */
   #define AE_IFG_RXIPG_SHIFT      8
   #define AE_IFG_RXIPG_MASK       0xff00
   
   #define AE_IFG_IPGR1_DEFAULT    0x40    /* Carrier-sense window. */
   #define AE_IFG_IPGR1_SHIFT      16
   #define AE_IFG_IPGR1_MASK       0x7f0000
   
   #define AE_IFG_IPGR2_DEFAULT    0x60    /* IFG window. */
   #define AE_IFG_IPGR2_SHIFT      24
   #define AE_IFG_IPGR2_MASK       0x7f000000
   
   /*
    * Half-duplex mode configuration register.
    */
   #define AE_HDPX_REG             0x1498
   
   /* Collision window. */
   #define AE_HDPX_LCOL_SHIFT      0
   #define AE_HDPX_LCOL_MASK       0x000003ff
   #define AE_HDPX_LCOL_DEFAULT    0x37
   
   /* Max retransmission time, after that the packet will be discarded. */
   #define AE_HDPX_RETRY_SHIFT     12
   #define AE_HDPX_RETRY_MASK      0x0000f000
   #define AE_HDPX_RETRY_DEFAULT   0x0f
   
   /* Alternative binary exponential back-off time. */
   #define AE_HDPX_ABEBT_SHIFT     20
   #define AE_HDPX_ABEBT_MASK      0x00f00000
   #define AE_HDPX_ABEBT_DEFAULT   0x0a
   
   /* IFG to start JAM for collision based flow control (8-bit time units).*/
   #define AE_HDPX_JAMIPG_SHIFT    24
   #define AE_HDPX_JAMIPG_MASK     0x0f000000
   #define AE_HDPX_JAMIPG_DEFAULT  0x07
   
   /* Allow the transmission of a packet which has been excessively deferred. */
   #define AE_HDPX_EXC_EN          0x00010000
   /* No back-off on collision, immediately start the retransmission. */
   #define AE_HDPX_NO_BACK_C       0x00020000
   /* No back-off on backpressure, immediately start the transmission. */
   #define AE_HDPX_NO_BACK_P       0x00040000
   /* Alternative binary exponential back-off enable. */
   #define AE_HDPX_ABEBE           0x00080000
   
   /*
    * Interrupt moderation timer configuration register.
    */
   #define AE_IMT_REG              0x1408  /* Timer value in 2 us units. */
   #define AE_IMT_MAX              65000
   #define AE_IMT_MIN              50
   #define AE_IMT_DEFAULT          100     /* 200 microseconds. */
   
   /*
    * Interrupt clearing timer configuration register.
    */
   #define AE_ICT_REG              0x140e  /* Maximum time allowed to clear
                                              interrupt. In 2 us units.  */
   #define AE_ICT_DEFAULT          50000   /* 100ms */
   
   /*
    * MTU configuration register.
    */
   #define AE_MTU_REG              0x149c  /* MTU size in bytes. */
   
   /*
    * Cut-through configuration register.
    */
   #define AE_CUT_THRESH_REG       0x1590  /* Cut-through threshold in unknown units. */
   #define AE_CUT_THRESH_DEFAULT   0x177
   
   /*
    * Flow-control configuration registers.
    */
   #define AE_FLOW_THRESH_HI_REG   0x15a8  /* High watermark of RxD
                                              overflow threshold. */
   #define AE_FLOW_THRESH_LO_REG   0x15aa  /* Lower watermark of RxD
                                              overflow threshold */
   
   /*
    * Mailbox configuration registers.
   */
   #define AE_MB_TXD_IDX_REG       0x15f0  /* TxD read index. */
   #define AE_MB_RXD_IDX_REG       0x15f4  /* RxD write index. */
   
   /*
    * DMA configuration registers.
    */
   #define AE_DMAREAD_REG          0x1580  /* Read DMA configuration register. */
   #define AE_DMAREAD_EN           1
   #define AE_DMAWRITE_REG         0x15a0  /* Write DMA configuration register. */
   #define AE_DMAWRITE_EN          1
   
   /*
    * MAC configuration register.
    */
   #define AE_MAC_REG              0x1480
   
   #define AE_MAC_TX_EN            0x00000001      /* Enable transmit. */
   #define AE_MAC_RX_EN            0x00000002      /* Enable receive. */
   #define AE_MAC_TX_FLOW_EN       0x00000004      /* Enable Tx flow control. */
   #define AE_MAC_RX_FLOW_EN       0x00000008      /* Enable Rx flow control. */
   #define AE_MAC_LOOPBACK         0x00000010      /* Loopback at MII. */
   #define AE_MAC_FULL_DUPLEX      0x00000020      /* Enable full-duplex. */
   #define AE_MAC_TX_CRC_EN        0x00000040      /* Enable CRC generation. */
   #define AE_MAC_TX_AUTOPAD       0x00000080      /* Pad short frames. */
   #define AE_MAC_PREAMBLE_MASK    0x00003c00      /* Preamble length. */
   #define AE_MAC_PREAMBLE_SHIFT   10
   #define AE_MAC_PREAMBLE_DEFAULT 0x07            /* By standard. */
   #define AE_MAC_RMVLAN_EN        0x00004000      /* Remove VLAN tags in
                                                      incoming packets. */
   #define AE_MAC_PROMISC_EN       0x00008000      /* Enable promiscue mode. */
   #define AE_MAC_TX_MAXBACKOFF    0x00100000      /* Unknown. */
   #define AE_MAC_MCAST_EN         0x02000000      /* Pass all multicast frames. */
   #define AE_MAC_BCAST_EN         0x04000000      /* Pass all broadcast frames. */
   #define AE_MAC_CLK_PHY          0x08000000      /* If 1 uses loopback clock
                                                      PHY, if 0 - system clock. */
   #define AE_HALFBUF_MASK         0xf0000000      /* Half-duplex retry buffer. */
   #define AE_HALFBUF_SHIFT        28
   #define AE_HALFBUF_DEFAULT      2               /* XXX: From Linux. */
   
   /*
    * MDIO control register.
    */
   #define AE_MDIO_REG             0x1414                                                                                                                   
   #define AE_MDIO_DATA_MASK       0xffff
   #define AE_MDIO_DATA_SHIFT      0
   #define AE_MDIO_REGADDR_MASK    0x1f0000
   #define AE_MDIO_REGADDR_SHIFT   16
   #define AE_MDIO_READ            0x00200000      /* Read operation. */
   #define AE_MDIO_SUP_PREAMBLE    0x00400000      /* Suppress preamble. */
   #define AE_MDIO_START           0x00800000      /* Initiate MDIO transfer. */
   #define AE_MDIO_CLK_SHIFT       24              /* Clock selection. */
   #define AE_MDIO_CLK_MASK        0x07000000      /* Clock selection. */
   #define AE_MDIO_CLK_25_4        0               /* Dividers? */
   #define AE_MDIO_CLK_25_6        2
   #define AE_MDIO_CLK_25_8        3
   #define AE_MDIO_CLK_25_10       4
   #define AE_MDIO_CLK_25_14       5
   #define AE_MDIO_CLK_25_20       6
   #define AE_MDIO_CLK_25_28       7
   #define AE_MDIO_BUSY            0x08000000      /* MDIO is busy. */
   
   /*
    * Idle status register.
    */
   #define AE_IDLE_REG             0x1410
   
   /*
    * Idle status bits.
    * If bit is set then the corresponding module is in non-idle state.
    */
   #define AE_IDLE_RXMAC           1
   #define AE_IDLE_TXMAC           2
   #define AE_IDLE_DMAREAD         8
   #define AE_IDLE_DMAWRITE        4
   
   /*
    * Multicast hash tables registers.
    */
   #define AE_REG_MHT0             0x1490
   #define AE_REG_MHT1             0x1494
   
   /*
    * Wake on lan (WOL).
    */
   #define AE_WOL_REG              0x14a0
   #define AE_WOL_MAGIC            0x00000004
   #define AE_WOL_MAGIC_PME        0x00000008
   #define AE_WOL_LNKCHG           0x00000010
   #define AE_WOL_LNKCHG_PME       0x00000020
   
   /*
    * PCIE configuration registers. Descriptions unknown.
    */
   #define AE_PCIE_LTSSM_TESTMODE_REG      0x12fc
   #define AE_PCIE_LTSSM_TESTMODE_DEFAULT  0x6500
   #define AE_PCIE_DLL_TX_CTRL_REG         0x1104
   #define AE_PCIE_DLL_TX_CTRL_SEL_NOR_CLK 0x0400
   #define AE_PCIE_DLL_TX_CTRL_DEFAULT     0x0568
   #define AE_PCIE_PHYMISC_REG             0x1000
   #define AE_PCIE_PHYMISC_FORCE_RCV_DET   0x4
   
   /*
    * PHY enable register.
    */
   #define AE_PHY_ENABLE_REG       0x140c
   #define AE_PHY_ENABLE           1
   
   /*
    * VPD registers.
    */
   #define AE_VPD_CAP_REG          0x6c    /* Command register. */
   #define AE_VPD_CAP_ID_MASK      0xff
   #define AE_VPD_CAP_ID_SHIFT     0
   #define AE_VPD_CAP_NEXT_MASK    0xff00
   #define AE_VPD_CAP_NEXT_SHIFT   8
   #define AE_VPD_CAP_ADDR_MASK    0x7fff0000
   #define AE_VPD_CAP_ADDR_SHIFT   16
   #define AE_VPD_CAP_DONE         0x80000000
                                                                                                      
   #define AE_VPD_DATA_REG         0x70    /* Data register. */
   
   #define AE_VPD_NREGS            64      /* Maximum number of VPD regs. */
   #define AE_VPD_SIG_MASK         0xff
   #define AE_VPD_SIG              0x5a    /* VPD block signature. */
   #define AE_VPD_REG_SHIFT        16      /* Register id offset. */
   
   /*
    * SPI registers.
    */
   #define AE_SPICTL_REG           0x200
   #define AE_SPICTL_VPD_EN        0x2000  /* Enable VPD. */
   
   /*
    * PHY-specific registers constants.
    */
   #define AE_PHY_DBG_ADDR         0x1d
   #define AE_PHY_DBG_DATA         0x1e
   #define AE_PHY_DBG_POWERSAVE    0x1000
   
   /*
    * TxD flags.
    */
   #define AE_TXD_INSERT_VTAG      0x8000  /* Insert VLAN tag on transfer. */
   
   /*
    * TxS flags.
    */
   #define AE_TXS_SUCCESS          0x0001  /* Packed transmitted successfully. */
   #define AE_TXS_BCAST            0x0002  /* Transmitted broadcast frame. */
   #define AE_TXS_MCAST            0x0004  /* Transmitted multicast frame. */
   #define AE_TXS_PAUSE            0x0008  /* Transmitted pause frame. */
   #define AE_TXS_CTRL             0x0010  /* Transmitted control frame. */
   #define AE_TXS_DEFER            0x0020  /* Frame transmitted with defer. */
   #define AE_TXS_EXCDEFER         0x0040  /* Excessive collision. */
   #define AE_TXS_SINGLECOL        0x0080  /* Single collision occuried. */
   #define AE_TXS_MULTICOL         0x0100  /* Multiple collisions occuried. */
   #define AE_TXS_LATECOL          0x0200  /* Late collision occuried. */
   #define AE_TXS_ABORTCOL         0x0400  /* Frame abort due to collisions. */
   #define AE_TXS_UNDERRUN         0x0800  /* Tx SRAM underrun occuried. */
   #define AE_TXS_UPDATE           0x8000
   
   /*
    * RxD flags.
    */
   #define AE_RXD_SUCCESS          0x0001
   #define AE_RXD_BCAST            0x0002  /* Broadcast frame received. */
   #define AE_RXD_MCAST            0x0004  /* Multicast frame received. */
   #define AE_RXD_PAUSE            0x0008  /* Pause frame received. */
   #define AE_RXD_CTRL             0x0010  /* Control frame received. */
   #define AE_RXD_CRCERR           0x0020  /* Invalid frame CRC. */
   #define AE_RXD_CODEERR          0x0040  /* Invalid frame opcode. */
   #define AE_RXD_RUNT             0x0080  /* Runt frame received. */
   #define AE_RXD_FRAG             0x0100  /* Collision fragment received. */
   #define AE_RXD_TRUNC            0x0200  /* The frame was truncated due
                                              to Rx SRAM underrun. */
   #define AE_RXD_ALIGN            0x0400  /* Frame alignment error. */
   #define AE_RXD_HAS_VLAN         0x0800  /* VLAN tag present. */
   #define AE_RXD_UPDATE           0x8000

Cache object: 838eb5115875bc85a0fbc388217aeba3