Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/dev/ahb/ahb.c
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 /*- 2 * CAM SCSI device driver for the Adaptec 174X SCSI Host adapter 3 * 4 * Copyright (c) 1998 Justin T. Gibbs 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice immediately at the beginning of the file, without modification, 12 * this list of conditions, and the following disclaimer. 13 * 2. The name of the author may not be used to endorse or promote products 14 * derived from this software without specific prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 20 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 * 28 * $FreeBSD: releng/8.1/sys/dev/ahb/ahb.c 170883 2007-06-17 15:21:09Z scottl $ 29 */ 30 31 #include <sys/param.h> 32 #include <sys/systm.h> 33 #include <sys/kernel.h> 34 #include <sys/malloc.h> 35 #include <sys/module.h> 36 #include <sys/lock.h> 37 #include <sys/mutex.h> 38 #include <sys/bus.h> 39 40 #include <machine/bus.h> 41 #include <machine/resource.h> 42 #include <sys/rman.h> 43 44 #include <cam/cam.h> 45 #include <cam/cam_ccb.h> 46 #include <cam/cam_sim.h> 47 #include <cam/cam_xpt_sim.h> 48 #include <cam/cam_debug.h> 49 50 #include <cam/scsi/scsi_message.h> 51 52 #include <dev/eisa/eisaconf.h> 53 54 #include <dev/ahb/ahbreg.h> 55 56 #define ccb_ecb_ptr spriv_ptr0 57 #define ccb_ahb_ptr spriv_ptr1 58 59 #define ahb_inb(ahb, port) \ 60 bus_space_read_1((ahb)->tag, (ahb)->bsh, port) 61 62 #define ahb_inl(ahb, port) \ 63 bus_space_read_4((ahb)->tag, (ahb)->bsh, port) 64 65 #define ahb_outb(ahb, port, value) \ 66 bus_space_write_1((ahb)->tag, (ahb)->bsh, port, value) 67 68 #define ahb_outl(ahb, port, value) \ 69 bus_space_write_4((ahb)->tag, (ahb)->bsh, port, value) 70 71 static const char *ahbmatch(eisa_id_t type); 72 static struct ahb_softc *ahballoc(device_t dev, struct resource *res); 73 static void ahbfree(struct ahb_softc *ahb); 74 static int ahbreset(struct ahb_softc *ahb); 75 static void ahbmapecbs(void *arg, bus_dma_segment_t *segs, 76 int nseg, int error); 77 static int ahbxptattach(struct ahb_softc *ahb); 78 static void ahbhandleimmed(struct ahb_softc *ahb, 79 u_int32_t mbox, u_int intstat); 80 static void ahbcalcresid(struct ahb_softc *ahb, 81 struct ecb *ecb, union ccb *ccb); 82 static __inline void ahbdone(struct ahb_softc *ahb, u_int32_t mbox, 83 u_int intstat); 84 static void ahbintr(void *arg); 85 static bus_dmamap_callback_t ahbexecuteecb; 86 static void ahbaction(struct cam_sim *sim, union ccb *ccb); 87 static void ahbpoll(struct cam_sim *sim); 88 89 /* Our timeout handler */ 90 static timeout_t ahbtimeout; 91 92 static __inline struct ecb* ahbecbget(struct ahb_softc *ahb); 93 static __inline void ahbecbfree(struct ahb_softc* ahb, 94 struct ecb* ecb); 95 static __inline u_int32_t ahbecbvtop(struct ahb_softc *ahb, 96 struct ecb *ecb); 97 static __inline struct ecb* ahbecbptov(struct ahb_softc *ahb, 98 u_int32_t ecb_addr); 99 static __inline u_int32_t ahbstatuspaddr(u_int32_t ecb_paddr); 100 static __inline u_int32_t ahbsensepaddr(u_int32_t ecb_paddr); 101 static __inline u_int32_t ahbsgpaddr(u_int32_t ecb_paddr); 102 static __inline void ahbqueuembox(struct ahb_softc *ahb, 103 u_int32_t mboxval, 104 u_int attn_code); 105 106 static __inline struct ecb* 107 ahbecbget(struct ahb_softc *ahb) 108 { 109 struct ecb* ecb; 110 int s; 111 112 s = splcam(); 113 if ((ecb = SLIST_FIRST(&ahb->free_ecbs)) != NULL) 114 SLIST_REMOVE_HEAD(&ahb->free_ecbs, links); 115 splx(s); 116 117 return (ecb); 118 } 119 120 static __inline void 121 ahbecbfree(struct ahb_softc* ahb, struct ecb* ecb) 122 { 123 int s; 124 125 s = splcam(); 126 ecb->state = ECB_FREE; 127 SLIST_INSERT_HEAD(&ahb->free_ecbs, ecb, links); 128 splx(s); 129 } 130 131 static __inline u_int32_t 132 ahbecbvtop(struct ahb_softc *ahb, struct ecb *ecb) 133 { 134 return (ahb->ecb_physbase 135 + (u_int32_t)((caddr_t)ecb - (caddr_t)ahb->ecb_array)); 136 } 137 138 static __inline struct ecb* 139 ahbecbptov(struct ahb_softc *ahb, u_int32_t ecb_addr) 140 { 141 return (ahb->ecb_array 142 + ((struct ecb*)(uintptr_t)ecb_addr 143 - (struct ecb*)(uintptr_t)ahb->ecb_physbase)); 144 } 145 146 static __inline u_int32_t 147 ahbstatuspaddr(u_int32_t ecb_paddr) 148 { 149 return (ecb_paddr + offsetof(struct ecb, status)); 150 } 151 152 static __inline u_int32_t 153 ahbsensepaddr(u_int32_t ecb_paddr) 154 { 155 return (ecb_paddr + offsetof(struct ecb, sense)); 156 } 157 158 static __inline u_int32_t 159 ahbsgpaddr(u_int32_t ecb_paddr) 160 { 161 return (ecb_paddr + offsetof(struct ecb, sg_list)); 162 } 163 164 static __inline void 165 ahbqueuembox(struct ahb_softc *ahb, u_int32_t mboxval, u_int attn_code) 166 { 167 u_int loopmax = 300; 168 while (--loopmax) { 169 u_int status; 170 171 status = ahb_inb(ahb, HOSTSTAT); 172 if ((status & (HOSTSTAT_MBOX_EMPTY|HOSTSTAT_BUSY)) 173 == HOSTSTAT_MBOX_EMPTY) 174 break; 175 DELAY(20); 176 } 177 if (loopmax == 0) 178 panic("ahb%ld: adapter not taking commands\n", ahb->unit); 179 180 ahb_outl(ahb, MBOXOUT0, mboxval); 181 ahb_outb(ahb, ATTN, attn_code); 182 } 183 184 static const char * 185 ahbmatch(eisa_id_t type) 186 { 187 switch(type & 0xfffffe00) { 188 case EISA_DEVICE_ID_ADAPTEC_1740: 189 return ("Adaptec 174x SCSI host adapter"); 190 break; 191 default: 192 break; 193 } 194 return (NULL); 195 } 196 197 static int 198 ahbprobe(device_t dev) 199 { 200 const char *desc; 201 u_int32_t iobase; 202 u_int32_t irq; 203 u_int8_t intdef; 204 int shared; 205 206 desc = ahbmatch(eisa_get_id(dev)); 207 if (!desc) 208 return (ENXIO); 209 device_set_desc(dev, desc); 210 211 iobase = (eisa_get_slot(dev) * EISA_SLOT_SIZE) + 212 AHB_EISA_SLOT_OFFSET; 213 214 eisa_add_iospace(dev, iobase, AHB_EISA_IOSIZE, RESVADDR_NONE); 215 216 intdef = inb(INTDEF + iobase); 217 switch (intdef & 0x7) { 218 case INT9: 219 irq = 9; 220 break; 221 case INT10: 222 irq = 10; 223 break; 224 case INT11: 225 irq = 11; 226 break; 227 case INT12: 228 irq = 12; 229 break; 230 case INT14: 231 irq = 14; 232 break; 233 case INT15: 234 irq = 15; 235 break; 236 default: 237 printf("Adaptec 174X at slot %d: illegal " 238 "irq setting %d\n", eisa_get_slot(dev), 239 (intdef & 0x7)); 240 irq = 0; 241 break; 242 } 243 if (irq == 0) 244 return ENXIO; 245 246 shared = (inb(INTDEF + iobase) & INTLEVEL) ? 247 EISA_TRIGGER_LEVEL : EISA_TRIGGER_EDGE; 248 249 eisa_add_intr(dev, irq, shared); 250 251 return 0; 252 } 253 254 static int 255 ahbattach(device_t dev) 256 { 257 /* 258 * find unit and check we have that many defined 259 */ 260 struct ahb_softc *ahb; 261 struct ecb* next_ecb; 262 struct resource *io = 0; 263 struct resource *irq = 0; 264 int rid; 265 void *ih; 266 267 rid = 0; 268 io = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid, RF_ACTIVE); 269 if (!io) { 270 device_printf(dev, "No I/O space?!\n"); 271 return ENOMEM; 272 } 273 274 if ((ahb = ahballoc(dev, io)) == NULL) { 275 goto error_exit2; 276 } 277 278 if (ahbreset(ahb) != 0) 279 goto error_exit; 280 281 rid = 0; 282 irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE); 283 if (!irq) { 284 device_printf(dev, "Can't allocate interrupt\n"); 285 goto error_exit; 286 } 287 288 /* 289 * Create our DMA tags. These tags define the kinds of device 290 * accessible memory allocations and memory mappings we will 291 * need to perform during normal operation. 292 */ 293 /* DMA tag for mapping buffers into device visible space. */ 294 /* XXX Should be a child of the EISA bus dma tag */ 295 if (bus_dma_tag_create( /* parent */ NULL, 296 /* alignment */ 1, 297 /* boundary */ 0, 298 /* lowaddr */ BUS_SPACE_MAXADDR_32BIT, 299 /* highaddr */ BUS_SPACE_MAXADDR, 300 /* filter */ NULL, 301 /* filterarg */ NULL, 302 /* maxsize */ MAXBSIZE, 303 /* nsegments */ AHB_NSEG, 304 /* maxsegsz */ BUS_SPACE_MAXSIZE_32BIT, 305 /* flags */ BUS_DMA_ALLOCNOW, 306 /* lockfunc */ busdma_lock_mutex, 307 /* lockarg */ &Giant, 308 &ahb->buffer_dmat) != 0) 309 goto error_exit; 310 311 ahb->init_level++; 312 313 /* DMA tag for our ccb structures and ha inquiry data */ 314 if (bus_dma_tag_create( /* parent */ NULL, 315 /* alignment */ 1, 316 /* boundary */ 0, 317 /* lowaddr */ BUS_SPACE_MAXADDR_32BIT, 318 /* highaddr */ BUS_SPACE_MAXADDR, 319 /* filter */ NULL, 320 /* filterarg */ NULL, 321 /* maxsize */ (AHB_NECB * 322 sizeof(struct ecb)) 323 + sizeof(*ahb->ha_inq_data), 324 /* nsegments */ 1, 325 /* maxsegsz */ BUS_SPACE_MAXSIZE_32BIT, 326 /* flags */ 0, 327 /* lockfunc */ busdma_lock_mutex, 328 /* lockarg */ &Giant, 329 &ahb->ecb_dmat) != 0) 330 goto error_exit; 331 332 ahb->init_level++; 333 334 /* Allocation for our ccbs */ 335 if (bus_dmamem_alloc(ahb->ecb_dmat, (void **)&ahb->ecb_array, 336 BUS_DMA_NOWAIT, &ahb->ecb_dmamap) != 0) 337 goto error_exit; 338 339 ahb->ha_inq_data = (struct ha_inquiry_data *)&ahb->ecb_array[AHB_NECB]; 340 341 ahb->init_level++; 342 343 /* And permanently map them */ 344 bus_dmamap_load(ahb->ecb_dmat, ahb->ecb_dmamap, 345 ahb->ecb_array, AHB_NSEG * sizeof(struct ecb), 346 ahbmapecbs, ahb, /*flags*/0); 347 348 ahb->init_level++; 349 350 /* Allocate the buffer dmamaps for each of our ECBs */ 351 bzero(ahb->ecb_array, (AHB_NECB * sizeof(struct ecb)) 352 + sizeof(*ahb->ha_inq_data)); 353 next_ecb = ahb->ecb_array; 354 while (ahb->num_ecbs < AHB_NECB) { 355 u_int32_t ecb_paddr; 356 357 if (bus_dmamap_create(ahb->buffer_dmat, /*flags*/0, 358 &next_ecb->dmamap)) 359 break; 360 ecb_paddr = ahbecbvtop(ahb, next_ecb); 361 next_ecb->hecb.status_ptr = ahbstatuspaddr(ecb_paddr); 362 next_ecb->hecb.sense_ptr = ahbsensepaddr(ecb_paddr); 363 ahb->num_ecbs++; 364 ahbecbfree(ahb, next_ecb); 365 next_ecb++; 366 } 367 368 if (ahb->num_ecbs == 0) 369 goto error_exit; 370 371 ahb->init_level++; 372 373 /* 374 * Now that we know we own the resources we need, register 375 * our bus with the XPT. 376 */ 377 if (ahbxptattach(ahb)) 378 goto error_exit; 379 380 /* Enable our interrupt */ 381 if (bus_setup_intr(dev, irq, INTR_TYPE_CAM|INTR_ENTROPY, NULL, ahbintr, 382 ahb, &ih) != 0) 383 goto error_exit; 384 385 return (0); 386 387 error_exit: 388 /* 389 * The board's IRQ line will not be left enabled 390 * if we can't intialize correctly, so its safe 391 * to release the irq. 392 */ 393 ahbfree(ahb); 394 error_exit2: 395 if (io) 396 bus_release_resource(dev, SYS_RES_IOPORT, 0, io); 397 if (irq) 398 bus_release_resource(dev, SYS_RES_IRQ, 0, irq); 399 return (-1); 400 } 401 402 static struct ahb_softc * 403 ahballoc(device_t dev, struct resource *res) 404 { 405 struct ahb_softc *ahb; 406 407 /* 408 * Allocate a storage area for us 409 */ 410 ahb = malloc(sizeof(struct ahb_softc), M_DEVBUF, M_NOWAIT | M_ZERO); 411 if (!ahb) { 412 device_printf(dev, "cannot malloc!\n"); 413 return (NULL); 414 } 415 SLIST_INIT(&ahb->free_ecbs); 416 LIST_INIT(&ahb->pending_ccbs); 417 ahb->unit = device_get_unit(dev); 418 ahb->tag = rman_get_bustag(res); 419 ahb->bsh = rman_get_bushandle(res); 420 ahb->disc_permitted = ~0; 421 ahb->tags_permitted = ~0; 422 ahb->dev = dev; 423 424 return (ahb); 425 } 426 427 static void 428 ahbfree(struct ahb_softc *ahb) 429 { 430 switch (ahb->init_level) { 431 default: 432 case 4: 433 bus_dmamap_unload(ahb->ecb_dmat, ahb->ecb_dmamap); 434 case 3: 435 bus_dmamem_free(ahb->ecb_dmat, ahb->ecb_array, 436 ahb->ecb_dmamap); 437 bus_dmamap_destroy(ahb->ecb_dmat, ahb->ecb_dmamap); 438 case 2: 439 bus_dma_tag_destroy(ahb->ecb_dmat); 440 case 1: 441 bus_dma_tag_destroy(ahb->buffer_dmat); 442 case 0: 443 break; 444 } 445 free(ahb, M_DEVBUF); 446 } 447 448 /* 449 * reset board, If it doesn't respond, return failure 450 */ 451 static int 452 ahbreset(struct ahb_softc *ahb) 453 { 454 int wait = 1000; /* 1 sec enough? */ 455 int test; 456 457 if ((ahb_inb(ahb, PORTADDR) & PORTADDR_ENHANCED) == 0) { 458 printf("ahb_reset: Controller not in enhanced mode\n"); 459 return (-1); 460 } 461 462 ahb_outb(ahb, CONTROL, CNTRL_HARD_RST); 463 DELAY(1000); 464 ahb_outb(ahb, CONTROL, 0); 465 while (--wait) { 466 DELAY(1000); 467 if ((ahb_inb(ahb, HOSTSTAT) & HOSTSTAT_BUSY) == 0) 468 break; 469 } 470 471 if (wait == 0) { 472 printf("ahbreset: No answer from aha1742 board\n"); 473 return (-1); 474 } 475 if ((test = ahb_inb(ahb, MBOXIN0)) != 0) { 476 printf("ahb_reset: self test failed, val = 0x%x\n", test); 477 return (-1); 478 } 479 while (ahb_inb(ahb, HOSTSTAT) & HOSTSTAT_INTPEND) { 480 ahb_outb(ahb, CONTROL, CNTRL_CLRINT); 481 DELAY(10000); 482 } 483 return (0); 484 } 485 486 static void 487 ahbmapecbs(void *arg, bus_dma_segment_t *segs, int nseg, int error) 488 { 489 struct ahb_softc* ahb; 490 491 ahb = (struct ahb_softc*)arg; 492 ahb->ecb_physbase = segs->ds_addr; 493 /* 494 * Space for adapter inquiry information is on the 495 * tail of the ecb array. 496 */ 497 ahb->ha_inq_physbase = ahbecbvtop(ahb, &ahb->ecb_array[AHB_NECB]); 498 } 499 500 static int 501 ahbxptattach(struct ahb_softc *ahb) 502 { 503 struct cam_devq *devq; 504 struct ecb *ecb; 505 u_int i; 506 507 /* Remeber who are we on the scsi bus */ 508 ahb->scsi_id = ahb_inb(ahb, SCSIDEF) & HSCSIID; 509 510 /* Use extended translation?? */ 511 ahb->extended_trans = ahb_inb(ahb, RESV1) & EXTENDED_TRANS; 512 513 /* Fetch adapter inquiry data */ 514 ecb = ahbecbget(ahb); /* Always succeeds - no outstanding commands */ 515 ecb->hecb.opcode = ECBOP_READ_HA_INQDATA; 516 ecb->hecb.flag_word1 = FW1_SUPPRESS_URUN_ERR|FW1_ERR_STATUS_BLK_ONLY; 517 ecb->hecb.data_ptr = ahb->ha_inq_physbase; 518 ecb->hecb.data_len = sizeof(struct ha_inquiry_data); 519 ecb->hecb.sense_ptr = 0; 520 ecb->state = ECB_ACTIVE; 521 522 /* Tell the adapter about this command */ 523 ahbqueuembox(ahb, ahbecbvtop(ahb, ecb), 524 ATTN_STARTECB|ahb->scsi_id); 525 526 /* Poll for interrupt completion */ 527 for (i = 1000; ecb->state != ECB_FREE && i != 0; i--) { 528 ahbintr(ahb); 529 DELAY(1000); 530 } 531 532 ahb->num_ecbs = MIN(ahb->num_ecbs, 533 ahb->ha_inq_data->scsi_data.spc2_flags); 534 printf("ahb%ld: %.8s %s SCSI Adapter, FW Rev. %.4s, ID=%d, %d ECBs\n", 535 ahb->unit, ahb->ha_inq_data->scsi_data.product, 536 (ahb->ha_inq_data->scsi_data.flags & 0x4) ? "Differential" 537 : "Single Ended", 538 ahb->ha_inq_data->scsi_data.revision, 539 ahb->scsi_id, ahb->num_ecbs); 540 541 /* Restore sense paddr for future CCB clients */ 542 ecb->hecb.sense_ptr = ahbsensepaddr(ahbecbvtop(ahb, ecb)); 543 544 ahbecbfree(ahb, ecb); 545 546 /* 547 * Create the device queue for our SIM. 548 */ 549 devq = cam_simq_alloc(ahb->num_ecbs); 550 if (devq == NULL) 551 return (ENOMEM); 552 553 /* 554 * Construct our SIM entry 555 */ 556 ahb->sim = cam_sim_alloc(ahbaction, ahbpoll, "ahb", ahb, ahb->unit, 557 &Giant, 2, ahb->num_ecbs, devq); 558 if (ahb->sim == NULL) { 559 cam_simq_free(devq); 560 return (ENOMEM); 561 } 562 563 if (xpt_bus_register(ahb->sim, ahb->dev, 0) != CAM_SUCCESS) { 564 cam_sim_free(ahb->sim, /*free_devq*/TRUE); 565 return (ENXIO); 566 } 567 568 if (xpt_create_path(&ahb->path, /*periph*/NULL, 569 cam_sim_path(ahb->sim), CAM_TARGET_WILDCARD, 570 CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 571 xpt_bus_deregister(cam_sim_path(ahb->sim)); 572 cam_sim_free(ahb->sim, /*free_devq*/TRUE); 573 return (ENXIO); 574 } 575 576 /* 577 * Allow the board to generate interrupts. 578 */ 579 ahb_outb(ahb, INTDEF, ahb_inb(ahb, INTDEF) | INTEN); 580 581 return (0); 582 } 583 584 static void 585 ahbhandleimmed(struct ahb_softc *ahb, u_int32_t mbox, u_int intstat) 586 { 587 struct ccb_hdr *ccb_h; 588 u_int target_id; 589 590 if (ahb->immed_cmd == 0) { 591 printf("ahb%ld: Immediate Command complete with no " 592 " pending command\n", ahb->unit); 593 return; 594 } 595 596 target_id = intstat & INTSTAT_TARGET_MASK; 597 598 ccb_h = LIST_FIRST(&ahb->pending_ccbs); 599 while (ccb_h != NULL) { 600 struct ecb *pending_ecb; 601 union ccb *ccb; 602 603 pending_ecb = (struct ecb *)ccb_h->ccb_ecb_ptr; 604 ccb = pending_ecb->ccb; 605 ccb_h = LIST_NEXT(ccb_h, sim_links.le); 606 if (ccb->ccb_h.target_id == target_id 607 || target_id == ahb->scsi_id) { 608 untimeout(ahbtimeout, pending_ecb, 609 ccb->ccb_h.timeout_ch); 610 LIST_REMOVE(&ccb->ccb_h, sim_links.le); 611 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) 612 bus_dmamap_unload(ahb->buffer_dmat, 613 pending_ecb->dmamap); 614 if (pending_ecb == ahb->immed_ecb) 615 ccb->ccb_h.status = 616 CAM_CMD_TIMEOUT|CAM_RELEASE_SIMQ; 617 else if (target_id == ahb->scsi_id) 618 ccb->ccb_h.status = CAM_SCSI_BUS_RESET; 619 else 620 ccb->ccb_h.status = CAM_BDR_SENT; 621 ahbecbfree(ahb, pending_ecb); 622 xpt_done(ccb); 623 } else if (ahb->immed_ecb != NULL) { 624 /* Re-instate timeout */ 625 ccb->ccb_h.timeout_ch = 626 timeout(ahbtimeout, (caddr_t)pending_ecb, 627 (ccb->ccb_h.timeout * hz) / 1000); 628 } 629 } 630 631 if (ahb->immed_ecb != NULL) { 632 ahb->immed_ecb = NULL; 633 printf("ahb%ld: No longer in timeout\n", ahb->unit); 634 } else if (target_id == ahb->scsi_id) 635 printf("ahb%ld: SCSI Bus Reset Delivered\n", ahb->unit); 636 else 637 printf("ahb%ld: Bus Device Reset Delibered to target %d\n", 638 ahb->unit, target_id); 639 640 ahb->immed_cmd = 0; 641 } 642 643 static void 644 ahbcalcresid(struct ahb_softc *ahb, struct ecb *ecb, union ccb *ccb) 645 { 646 if (ecb->status.data_overrun != 0) { 647 /* 648 * Overrun Condition. The hardware doesn't 649 * provide a meaningful byte count in this case 650 * (the residual is always 0). Tell the XPT 651 * layer about the error. 652 */ 653 ccb->ccb_h.status = CAM_DATA_RUN_ERR; 654 } else { 655 ccb->csio.resid = ecb->status.resid_count; 656 657 if ((ecb->hecb.flag_word1 & FW1_SG_ECB) != 0) { 658 /* 659 * For S/G transfers, the adapter provides a pointer 660 * to the address in the last S/G element used and a 661 * residual for that element. So, we need to sum up 662 * the elements that follow it in order to get a real 663 * residual number. If we have an overrun, the residual 664 * reported will be 0 and we already know that all S/G 665 * segments have been exhausted, so we can skip this 666 * step. 667 */ 668 ahb_sg_t *sg; 669 int num_sg; 670 671 num_sg = ecb->hecb.data_len / sizeof(ahb_sg_t); 672 673 /* Find the S/G the adapter was working on */ 674 for (sg = ecb->sg_list; 675 num_sg != 0 && sg->addr != ecb->status.resid_addr; 676 num_sg--, sg++) 677 ; 678 679 /* Skip it */ 680 num_sg--; 681 sg++; 682 683 /* Sum the rest */ 684 for (; num_sg != 0; num_sg--, sg++) 685 ccb->csio.resid += sg->len; 686 } 687 /* Underruns are not errors */ 688 ccb->ccb_h.status = CAM_REQ_CMP; 689 } 690 } 691 692 static void 693 ahbprocesserror(struct ahb_softc *ahb, struct ecb *ecb, union ccb *ccb) 694 { 695 struct hardware_ecb *hecb; 696 struct ecb_status *status; 697 698 hecb = &ecb->hecb; 699 status = &ecb->status; 700 switch (status->ha_status) { 701 case HS_OK: 702 ccb->csio.scsi_status = status->scsi_status; 703 if (status->scsi_status != 0) { 704 ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR; 705 if (status->sense_stored) { 706 ccb->ccb_h.status |= CAM_AUTOSNS_VALID; 707 ccb->csio.sense_resid = 708 ccb->csio.sense_len - status->sense_len; 709 bcopy(&ecb->sense, &ccb->csio.sense_data, 710 status->sense_len); 711 } 712 } 713 break; 714 case HS_TARGET_NOT_ASSIGNED: 715 ccb->ccb_h.status = CAM_PATH_INVALID; 716 break; 717 case HS_SEL_TIMEOUT: 718 ccb->ccb_h.status = CAM_SEL_TIMEOUT; 719 break; 720 case HS_DATA_RUN_ERR: 721 ahbcalcresid(ahb, ecb, ccb); 722 break; 723 case HS_UNEXPECTED_BUSFREE: 724 ccb->ccb_h.status = CAM_UNEXP_BUSFREE; 725 break; 726 case HS_INVALID_PHASE: 727 ccb->ccb_h.status = CAM_SEQUENCE_FAIL; 728 break; 729 case HS_REQUEST_SENSE_FAILED: 730 ccb->ccb_h.status = CAM_AUTOSENSE_FAIL; 731 break; 732 case HS_TAG_MSG_REJECTED: 733 { 734 struct ccb_trans_settings neg; 735 struct ccb_trans_settings_scsi *scsi = &neg.proto_specific.scsi; 736 737 xpt_print_path(ccb->ccb_h.path); 738 printf("refuses tagged commands. Performing " 739 "non-tagged I/O\n"); 740 memset(&neg, 0, sizeof (neg)); 741 neg.protocol = PROTO_SCSI; 742 neg.protocol_version = SCSI_REV_2; 743 neg.transport = XPORT_SPI; 744 neg.transport_version = 2; 745 scsi->flags = CTS_SCSI_VALID_TQ; 746 xpt_setup_ccb(&neg.ccb_h, ccb->ccb_h.path, /*priority*/1); 747 xpt_async(AC_TRANSFER_NEG, ccb->ccb_h.path, &neg); 748 ahb->tags_permitted &= ~(0x01 << ccb->ccb_h.target_id); 749 ccb->ccb_h.status = CAM_MSG_REJECT_REC; 750 break; 751 } 752 case HS_FIRMWARE_LOAD_REQ: 753 case HS_HARDWARE_ERR: 754 /* 755 * Tell the system that the Adapter 756 * is no longer functional. 757 */ 758 ccb->ccb_h.status = CAM_NO_HBA; 759 break; 760 case HS_CMD_ABORTED_HOST: 761 case HS_CMD_ABORTED_ADAPTER: 762 case HS_ATN_TARGET_FAILED: 763 case HS_SCSI_RESET_ADAPTER: 764 case HS_SCSI_RESET_INCOMING: 765 ccb->ccb_h.status = CAM_SCSI_BUS_RESET; 766 break; 767 case HS_INVALID_ECB_PARAM: 768 printf("ahb%ld: opcode 0x%02x, flag_word1 0x%02x, flag_word2 0x%02x\n", 769 ahb->unit, hecb->opcode, hecb->flag_word1, hecb->flag_word2); 770 ccb->ccb_h.status = CAM_SCSI_BUS_RESET; 771 break; 772 case HS_DUP_TCB_RECEIVED: 773 case HS_INVALID_OPCODE: 774 case HS_INVALID_CMD_LINK: 775 case HS_PROGRAM_CKSUM_ERROR: 776 panic("ahb%ld: Can't happen host status %x occurred", 777 ahb->unit, status->ha_status); 778 break; 779 } 780 if (ccb->ccb_h.status != CAM_REQ_CMP) { 781 xpt_freeze_devq(ccb->ccb_h.path, /*count*/1); 782 ccb->ccb_h.status |= CAM_DEV_QFRZN; 783 } 784 } 785 786 static void 787 ahbdone(struct ahb_softc *ahb, u_int32_t mbox, u_int intstat) 788 { 789 struct ecb *ecb; 790 union ccb *ccb; 791 792 ecb = ahbecbptov(ahb, mbox); 793 794 if ((ecb->state & ECB_ACTIVE) == 0) 795 panic("ecb not active"); 796 797 ccb = ecb->ccb; 798 799 if (ccb != NULL) { 800 untimeout(ahbtimeout, ecb, ccb->ccb_h.timeout_ch); 801 LIST_REMOVE(&ccb->ccb_h, sim_links.le); 802 803 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 804 bus_dmasync_op_t op; 805 806 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) 807 op = BUS_DMASYNC_POSTREAD; 808 else 809 op = BUS_DMASYNC_POSTWRITE; 810 bus_dmamap_sync(ahb->buffer_dmat, ecb->dmamap, op); 811 bus_dmamap_unload(ahb->buffer_dmat, ecb->dmamap); 812 } 813 814 if ((intstat & INTSTAT_MASK) == INTSTAT_ECB_OK) { 815 ccb->ccb_h.status = CAM_REQ_CMP; 816 ccb->csio.resid = 0; 817 } else { 818 ahbprocesserror(ahb, ecb, ccb); 819 } 820 ahbecbfree(ahb, ecb); 821 xpt_done(ccb); 822 } else { 823 /* Non CCB Command */ 824 if ((intstat & INTSTAT_MASK) != INTSTAT_ECB_OK) { 825 printf("ahb%ld: Command 0%x Failed %x:%x:%x\n", 826 ahb->unit, ecb->hecb.opcode, 827 *((u_int16_t*)&ecb->status), 828 ecb->status.ha_status, ecb->status.resid_count); 829 } 830 /* Client owns this ECB and will release it. */ 831 } 832 } 833 834 /* 835 * Catch an interrupt from the adaptor 836 */ 837 static void 838 ahbintr(void *arg) 839 { 840 struct ahb_softc *ahb; 841 u_int intstat; 842 u_int32_t mbox; 843 844 ahb = (struct ahb_softc *)arg; 845 846 while (ahb_inb(ahb, HOSTSTAT) & HOSTSTAT_INTPEND) { 847 /* 848 * Fetch information about this interrupt. 849 */ 850 intstat = ahb_inb(ahb, INTSTAT); 851 mbox = ahb_inl(ahb, MBOXIN0); 852 853 /* 854 * Reset interrupt latch. 855 */ 856 ahb_outb(ahb, CONTROL, CNTRL_CLRINT); 857 858 /* 859 * Process the completed operation 860 */ 861 switch (intstat & INTSTAT_MASK) { 862 case INTSTAT_ECB_OK: 863 case INTSTAT_ECB_CMPWRETRY: 864 case INTSTAT_ECB_CMPWERR: 865 ahbdone(ahb, mbox, intstat); 866 break; 867 case INTSTAT_AEN_OCCURED: 868 if ((intstat & INTSTAT_TARGET_MASK) == ahb->scsi_id) { 869 /* Bus Reset */ 870 xpt_print_path(ahb->path); 871 switch (mbox) { 872 case HS_SCSI_RESET_ADAPTER: 873 printf("Host Adapter Initiated " 874 "Bus Reset occurred\n"); 875 break; 876 case HS_SCSI_RESET_INCOMING: 877 printf("Bus Reset Initiated " 878 "by another device occurred\n"); 879 break; 880 } 881 /* Notify the XPT */ 882 xpt_async(AC_BUS_RESET, ahb->path, NULL); 883 break; 884 } 885 printf("Unsupported initiator selection AEN occured\n"); 886 break; 887 case INTSTAT_IMMED_OK: 888 case INTSTAT_IMMED_ERR: 889 ahbhandleimmed(ahb, mbox, intstat); 890 break; 891 case INTSTAT_HW_ERR: 892 panic("Unrecoverable hardware Error Occurred\n"); 893 } 894 } 895 } 896 897 static void 898 ahbexecuteecb(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error) 899 { 900 struct ecb *ecb; 901 union ccb *ccb; 902 struct ahb_softc *ahb; 903 u_int32_t ecb_paddr; 904 int s; 905 906 ecb = (struct ecb *)arg; 907 ccb = ecb->ccb; 908 ahb = (struct ahb_softc *)ccb->ccb_h.ccb_ahb_ptr; 909 910 if (error != 0) { 911 if (error != EFBIG) 912 printf("ahb%ld: Unexepected error 0x%x returned from " 913 "bus_dmamap_load\n", ahb->unit, error); 914 if (ccb->ccb_h.status == CAM_REQ_INPROG) { 915 xpt_freeze_devq(ccb->ccb_h.path, /*count*/1); 916 ccb->ccb_h.status = CAM_REQ_TOO_BIG|CAM_DEV_QFRZN; 917 } 918 ahbecbfree(ahb, ecb); 919 xpt_done(ccb); 920 return; 921 } 922 923 ecb_paddr = ahbecbvtop(ahb, ecb); 924 925 if (nseg != 0) { 926 ahb_sg_t *sg; 927 bus_dma_segment_t *end_seg; 928 bus_dmasync_op_t op; 929 930 end_seg = dm_segs + nseg; 931 932 /* Copy the segments into our SG list */ 933 sg = ecb->sg_list; 934 while (dm_segs < end_seg) { 935 sg->addr = dm_segs->ds_addr; 936 sg->len = dm_segs->ds_len; 937 sg++; 938 dm_segs++; 939 } 940 941 if (nseg > 1) { 942 ecb->hecb.flag_word1 |= FW1_SG_ECB; 943 ecb->hecb.data_ptr = ahbsgpaddr(ecb_paddr); 944 ecb->hecb.data_len = sizeof(ahb_sg_t) * nseg; 945 } else { 946 ecb->hecb.data_ptr = ecb->sg_list->addr; 947 ecb->hecb.data_len = ecb->sg_list->len; 948 } 949 950 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { 951 /* ecb->hecb.flag_word2 |= FW2_DATA_DIR_IN; */ 952 op = BUS_DMASYNC_PREREAD; 953 } else { 954 op = BUS_DMASYNC_PREWRITE; 955 } 956 /* ecb->hecb.flag_word2 |= FW2_CHECK_DATA_DIR; */ 957 958 bus_dmamap_sync(ahb->buffer_dmat, ecb->dmamap, op); 959 960 } else { 961 ecb->hecb.data_ptr = 0; 962 ecb->hecb.data_len = 0; 963 } 964 965 s = splcam(); 966 967 /* 968 * Last time we need to check if this CCB needs to 969 * be aborted. 970 */ 971 if (ccb->ccb_h.status != CAM_REQ_INPROG) { 972 if (nseg != 0) 973 bus_dmamap_unload(ahb->buffer_dmat, ecb->dmamap); 974 ahbecbfree(ahb, ecb); 975 xpt_done(ccb); 976 splx(s); 977 return; 978 } 979 980 ecb->state = ECB_ACTIVE; 981 ccb->ccb_h.status |= CAM_SIM_QUEUED; 982 LIST_INSERT_HEAD(&ahb->pending_ccbs, &ccb->ccb_h, sim_links.le); 983 984 /* Tell the adapter about this command */ 985 ahbqueuembox(ahb, ecb_paddr, ATTN_STARTECB|ccb->ccb_h.target_id); 986 987 ccb->ccb_h.timeout_ch = timeout(ahbtimeout, (caddr_t)ecb, 988 (ccb->ccb_h.timeout * hz) / 1000); 989 splx(s); 990 } 991 992 static void 993 ahbaction(struct cam_sim *sim, union ccb *ccb) 994 { 995 struct ahb_softc *ahb; 996 997 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("ahbaction\n")); 998 999 ahb = (struct ahb_softc *)cam_sim_softc(sim); 1000 1001 switch (ccb->ccb_h.func_code) { 1002 /* Common cases first */ 1003 case XPT_SCSI_IO: /* Execute the requested I/O operation */ 1004 { 1005 struct ecb *ecb; 1006 struct hardware_ecb *hecb; 1007 1008 /* 1009 * get an ecb to use. 1010 */ 1011 if ((ecb = ahbecbget(ahb)) == NULL) { 1012 /* Should never occur */ 1013 panic("Failed to get an ecb"); 1014 } 1015 1016 /* 1017 * So we can find the ECB when an abort is requested 1018 */ 1019 ecb->ccb = ccb; 1020 ccb->ccb_h.ccb_ecb_ptr = ecb; 1021 ccb->ccb_h.ccb_ahb_ptr = ahb; 1022 1023 /* 1024 * Put all the arguments for the xfer in the ecb 1025 */ 1026 hecb = &ecb->hecb; 1027 hecb->opcode = ECBOP_INITIATOR_SCSI_CMD; 1028 hecb->flag_word1 = FW1_AUTO_REQUEST_SENSE 1029 | FW1_ERR_STATUS_BLK_ONLY; 1030 hecb->flag_word2 = ccb->ccb_h.target_lun 1031 | FW2_NO_RETRY_ON_BUSY; 1032 if ((ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) != 0) { 1033 hecb->flag_word2 |= FW2_TAG_ENB 1034 | ((ccb->csio.tag_action & 0x3) 1035 << FW2_TAG_TYPE_SHIFT); 1036 } 1037 if ((ccb->ccb_h.flags & CAM_DIS_DISCONNECT) != 0) 1038 hecb->flag_word2 |= FW2_DISABLE_DISC; 1039 hecb->sense_len = ccb->csio.sense_len; 1040 hecb->cdb_len = ccb->csio.cdb_len; 1041 if ((ccb->ccb_h.flags & CAM_CDB_POINTER) != 0) { 1042 if ((ccb->ccb_h.flags & CAM_CDB_PHYS) == 0) { 1043 bcopy(ccb->csio.cdb_io.cdb_ptr, 1044 hecb->cdb, hecb->cdb_len); 1045 } else { 1046 /* I guess I could map it in... */ 1047 ccb->ccb_h.status = CAM_REQ_INVALID; 1048 ahbecbfree(ahb, ecb); 1049 xpt_done(ccb); 1050 return; 1051 } 1052 } else { 1053 bcopy(ccb->csio.cdb_io.cdb_bytes, 1054 hecb->cdb, hecb->cdb_len); 1055 } 1056 1057 /* 1058 * If we have any data to send with this command, 1059 * map it into bus space. 1060 */ 1061 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 1062 if ((ccb->ccb_h.flags & CAM_SCATTER_VALID) == 0) { 1063 /* 1064 * We've been given a pointer 1065 * to a single buffer. 1066 */ 1067 if ((ccb->ccb_h.flags & CAM_DATA_PHYS)==0) { 1068 int s; 1069 int error; 1070 1071 s = splsoftvm(); 1072 error = bus_dmamap_load( 1073 ahb->buffer_dmat, 1074 ecb->dmamap, 1075 ccb->csio.data_ptr, 1076 ccb->csio.dxfer_len, 1077 ahbexecuteecb, 1078 ecb, /*flags*/0); 1079 if (error == EINPROGRESS) { 1080 /* 1081 * So as to maintain ordering, 1082 * freeze the controller queue 1083 * until our mapping is 1084 * returned. 1085 */ 1086 xpt_freeze_simq(ahb->sim, 1); 1087 ccb->ccb_h.status |= 1088 CAM_RELEASE_SIMQ; 1089 } 1090 splx(s); 1091 } else { 1092 struct bus_dma_segment seg; 1093 1094 /* Pointer to physical buffer */ 1095 seg.ds_addr = 1096 (bus_addr_t)ccb->csio.data_ptr; 1097 seg.ds_len = ccb->csio.dxfer_len; 1098 ahbexecuteecb(ecb, &seg, 1, 0); 1099 } 1100 } else { 1101 struct bus_dma_segment *segs; 1102 1103 if ((ccb->ccb_h.flags & CAM_DATA_PHYS) != 0) 1104 panic("ahbaction - Physical segment " 1105 "pointers unsupported"); 1106 1107 if ((ccb->ccb_h.flags & CAM_SG_LIST_PHYS) == 0) 1108 panic("btaction - Virtual segment " 1109 "addresses unsupported"); 1110 1111 /* Just use the segments provided */ 1112 segs = (struct bus_dma_segment *) 1113 ccb->csio.data_ptr; 1114 ahbexecuteecb(ecb, segs, ccb->csio.sglist_cnt, 1115 0); 1116 } 1117 } else { 1118 ahbexecuteecb(ecb, NULL, 0, 0); 1119 } 1120 break; 1121 } 1122 case XPT_EN_LUN: /* Enable LUN as a target */ 1123 case XPT_TARGET_IO: /* Execute target I/O request */ 1124 case XPT_ACCEPT_TARGET_IO: /* Accept Host Target Mode CDB */ 1125 case XPT_CONT_TARGET_IO: /* Continue Host Target I/O Connection*/ 1126 case XPT_ABORT: /* Abort the specified CCB */ 1127 /* XXX Implement */ 1128 ccb->ccb_h.status = CAM_REQ_INVALID; 1129 xpt_done(ccb); 1130 break; 1131 case XPT_SET_TRAN_SETTINGS: 1132 { 1133 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; 1134 xpt_done(ccb); 1135 break; 1136 } 1137 case XPT_GET_TRAN_SETTINGS: 1138 /* Get default/user set transfer settings for the target */ 1139 { 1140 struct ccb_trans_settings *cts = &ccb->cts; 1141 u_int target_mask = 0x01 << ccb->ccb_h.target_id; 1142 struct ccb_trans_settings_scsi *scsi = 1143 &cts->proto_specific.scsi; 1144 struct ccb_trans_settings_spi *spi = 1145 &cts->xport_specific.spi; 1146 1147 if (cts->type == CTS_TYPE_USER_SETTINGS) { 1148 cts->protocol = PROTO_SCSI; 1149 cts->protocol_version = SCSI_REV_2; 1150 cts->transport = XPORT_SPI; 1151 cts->transport_version = 2; 1152 1153 scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB; 1154 spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB; 1155 if ((ahb->disc_permitted & target_mask) != 0) 1156 spi->flags |= CTS_SPI_FLAGS_DISC_ENB; 1157 if ((ahb->tags_permitted & target_mask) != 0) 1158 scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB; 1159 spi->bus_width = MSG_EXT_WDTR_BUS_8_BIT; 1160 spi->sync_period = 25; /* 10MHz */ 1161 1162 if (spi->sync_period != 0) 1163 spi->sync_offset = 15; 1164 1165 spi->valid = CTS_SPI_VALID_SYNC_RATE 1166 | CTS_SPI_VALID_SYNC_OFFSET 1167 | CTS_SPI_VALID_BUS_WIDTH 1168 | CTS_SPI_VALID_DISC; 1169 scsi->valid = CTS_SCSI_VALID_TQ; 1170 ccb->ccb_h.status = CAM_REQ_CMP; 1171 } else { 1172 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; 1173 } 1174 xpt_done(ccb); 1175 break; 1176 } 1177 case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */ 1178 { 1179 int i; 1180 int s; 1181 1182 s = splcam(); 1183 ahb->immed_cmd = IMMED_RESET; 1184 ahbqueuembox(ahb, IMMED_RESET, ATTN_IMMED|ccb->ccb_h.target_id); 1185 /* Poll for interrupt completion */ 1186 for (i = 1000; ahb->immed_cmd != 0 && i != 0; i--) { 1187 DELAY(1000); 1188 ahbintr(cam_sim_softc(sim)); 1189 } 1190 splx(s); 1191 break; 1192 } 1193 case XPT_CALC_GEOMETRY: 1194 { 1195 cam_calc_geometry(&ccb->ccg, ahb->extended_trans); 1196 xpt_done(ccb); 1197 break; 1198 } 1199 case XPT_RESET_BUS: /* Reset the specified SCSI bus */ 1200 { 1201 int i; 1202 1203 ahb->immed_cmd = IMMED_RESET; 1204 ahbqueuembox(ahb, IMMED_RESET, ATTN_IMMED|ahb->scsi_id); 1205 /* Poll for interrupt completion */ 1206 for (i = 1000; ahb->immed_cmd != 0 && i != 0; i--) 1207 DELAY(1000); 1208 ccb->ccb_h.status = CAM_REQ_CMP; 1209 xpt_done(ccb); 1210 break; 1211 } 1212 case XPT_TERM_IO: /* Terminate the I/O process */ 1213 /* XXX Implement */ 1214 ccb->ccb_h.status = CAM_REQ_INVALID; 1215 xpt_done(ccb); 1216 break; 1217 case XPT_PATH_INQ: /* Path routing inquiry */ 1218 { 1219 struct ccb_pathinq *cpi = &ccb->cpi; 1220 1221 cpi->version_num = 1; /* XXX??? */ 1222 cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE; 1223 cpi->target_sprt = 0; 1224 cpi->hba_misc = 0; 1225 cpi->hba_eng_cnt = 0; 1226 cpi->max_target = 7; 1227 cpi->max_lun = 7; 1228 cpi->initiator_id = ahb->scsi_id; 1229 cpi->bus_id = cam_sim_bus(sim); 1230 cpi->base_transfer_speed = 3300; 1231 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 1232 strncpy(cpi->hba_vid, "Adaptec", HBA_IDLEN); 1233 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 1234 cpi->unit_number = cam_sim_unit(sim); 1235 cpi->transport = XPORT_SPI; 1236 cpi->transport_version = 2; 1237 cpi->protocol = PROTO_SCSI; 1238 cpi->protocol_version = SCSI_REV_2; 1239 cpi->ccb_h.status = CAM_REQ_CMP; 1240 xpt_done(ccb); 1241 break; 1242 } 1243 #if 0 1244 /* Need these??? */ 1245 case XPT_IMMED_NOTIFY: /* Notify Host Target driver of event */ 1246 case XPT_NOTIFY_ACK: /* Acknowledgement of event */ 1247 #endif 1248 default: 1249 ccb->ccb_h.status = CAM_REQ_INVALID; 1250 xpt_done(ccb); 1251 break; 1252 } 1253 } 1254 1255 static void 1256 ahbpoll(struct cam_sim *sim) 1257 { 1258 ahbintr(cam_sim_softc(sim)); 1259 } 1260 1261 static void 1262 ahbtimeout(void *arg) 1263 { 1264 struct ecb *ecb; 1265 union ccb *ccb; 1266 struct ahb_softc *ahb; 1267 int s; 1268 1269 ecb = (struct ecb *)arg; 1270 ccb = ecb->ccb; 1271 ahb = (struct ahb_softc *)ccb->ccb_h.ccb_ahb_ptr; 1272 xpt_print_path(ccb->ccb_h.path); 1273 printf("ECB %p - timed out\n", (void *)ecb); 1274 1275 s = splcam(); 1276 1277 if ((ecb->state & ECB_ACTIVE) == 0) { 1278 xpt_print_path(ccb->ccb_h.path); 1279 printf("ECB %p - timed out ECB already completed\n", 1280 (void *)ecb); 1281 splx(s); 1282 return; 1283 } 1284 /* 1285 * In order to simplify the recovery process, we ask the XPT 1286 * layer to halt the queue of new transactions and we traverse 1287 * the list of pending CCBs and remove their timeouts. This 1288 * means that the driver attempts to clear only one error 1289 * condition at a time. In general, timeouts that occur 1290 * close together are related anyway, so there is no benefit 1291 * in attempting to handle errors in parrallel. Timeouts will 1292 * be reinstated when the recovery process ends. 1293 */ 1294 if ((ecb->state & ECB_DEVICE_RESET) == 0) { 1295 struct ccb_hdr *ccb_h; 1296 1297 if ((ecb->state & ECB_RELEASE_SIMQ) == 0) { 1298 xpt_freeze_simq(ahb->sim, /*count*/1); 1299 ecb->state |= ECB_RELEASE_SIMQ; 1300 } 1301 1302 ccb_h = LIST_FIRST(&ahb->pending_ccbs); 1303 while (ccb_h != NULL) { 1304 struct ecb *pending_ecb; 1305 1306 pending_ecb = (struct ecb *)ccb_h->ccb_ecb_ptr; 1307 untimeout(ahbtimeout, pending_ecb, ccb_h->timeout_ch); 1308 ccb_h = LIST_NEXT(ccb_h, sim_links.le); 1309 } 1310 1311 /* Store for our interrupt handler */ 1312 ahb->immed_ecb = ecb; 1313 1314 /* 1315 * Send a Bus Device Reset message: 1316 * The target that is holding up the bus may not 1317 * be the same as the one that triggered this timeout 1318 * (different commands have different timeout lengths), 1319 * but we have no way of determining this from our 1320 * timeout handler. Our strategy here is to queue a 1321 * BDR message to the target of the timed out command. 1322 * If this fails, we'll get another timeout 2 seconds 1323 * later which will attempt a bus reset. 1324 */ 1325 xpt_print_path(ccb->ccb_h.path); 1326 printf("Queuing BDR\n"); 1327 ecb->state |= ECB_DEVICE_RESET; 1328 ccb->ccb_h.timeout_ch = 1329 timeout(ahbtimeout, (caddr_t)ecb, 2 * hz); 1330 1331 ahb->immed_cmd = IMMED_RESET; 1332 ahbqueuembox(ahb, IMMED_RESET, ATTN_IMMED|ccb->ccb_h.target_id); 1333 } else if ((ecb->state & ECB_SCSIBUS_RESET) != 0) { 1334 /* 1335 * Try a SCSI bus reset. We do this only if we 1336 * have already attempted to clear the condition with a BDR. 1337 */ 1338 xpt_print_path(ccb->ccb_h.path); 1339 printf("Attempting SCSI Bus reset\n"); 1340 ecb->state |= ECB_SCSIBUS_RESET; 1341 ccb->ccb_h.timeout_ch = 1342 timeout(ahbtimeout, (caddr_t)ecb, 2 * hz); 1343 ahb->immed_cmd = IMMED_RESET; 1344 ahbqueuembox(ahb, IMMED_RESET, ATTN_IMMED|ahb->scsi_id); 1345 } else { 1346 /* Bring out the hammer... */ 1347 ahbreset(ahb); 1348 1349 /* Simulate the reset complete interrupt */ 1350 ahbhandleimmed(ahb, 0, ahb->scsi_id|INTSTAT_IMMED_OK); 1351 } 1352 1353 splx(s); 1354 } 1355 1356 static device_method_t ahb_eisa_methods[] = { 1357 /* Device interface */ 1358 DEVMETHOD(device_probe, ahbprobe), 1359 DEVMETHOD(device_attach, ahbattach), 1360 1361 { 0, 0 } 1362 }; 1363 1364 static driver_t ahb_eisa_driver = { 1365 "ahb", 1366 ahb_eisa_methods, 1367 1, /* unused */ 1368 }; 1369 1370 static devclass_t ahb_devclass; 1371 1372 DRIVER_MODULE(ahb, eisa, ahb_eisa_driver, ahb_devclass, 0, 0); 1373 MODULE_DEPEND(ahb, eisa, 1, 1, 1); 1374 MODULE_DEPEND(ahb, cam, 1, 1, 1);
Cache object: a8694f5ad25fd53baecb9a55e3c75656
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]