FreeBSD/Linux Kernel Cross Reference
sys/dev/ath/ath_hal/ah_diagcodes.h

     /*-
      * SPDX-License-Identifier: ISC
      *
      * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
      * Copyright (c) 2002-2008 Atheros Communications, Inc.
      *
      * Permission to use, copy, modify, and/or distribute this software for any
      * purpose with or without fee is hereby granted, provided that the above
      * copyright notice and this permission notice appear in all copies.
     *
     * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
     * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
     * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
     * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
     * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
     * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
     * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
     *
     * $FreeBSD$
     */
    #ifndef _ATH_AH_DIAGCODES_H_
    #define _ATH_AH_DIAGCODES_H_
    /*
     * Atheros Device Hardware Access Layer (HAL).
     *
     * Internal diagnostic API definitions.
     */
    
    /*
     * Diagnostic interface.  This is an open-ended interface that
     * is opaque to applications.  Diagnostic programs use this to
     * retrieve internal data structures, etc.  There is no guarantee
     * that calling conventions for calls other than HAL_DIAG_REVS
     * are stable between HAL releases; a diagnostic application must
     * use the HAL revision information to deal with ABI/API differences.
     *
     * NB: do not renumber these, certain codes are publicly used.
     */
    enum {
            HAL_DIAG_REVS           = 0,    /* MAC/PHY/Radio revs */
            HAL_DIAG_EEPROM         = 1,    /* EEPROM contents */
            HAL_DIAG_EEPROM_EXP_11A = 2,    /* EEPROM 5112 power exp for 11a */
            HAL_DIAG_EEPROM_EXP_11B = 3,    /* EEPROM 5112 power exp for 11b */
            HAL_DIAG_EEPROM_EXP_11G = 4,    /* EEPROM 5112 power exp for 11g */
            HAL_DIAG_ANI_CURRENT    = 5,    /* ANI current channel state */
            HAL_DIAG_ANI_OFDM       = 6,    /* ANI OFDM timing error stats */
            HAL_DIAG_ANI_CCK        = 7,    /* ANI CCK timing error stats */
            HAL_DIAG_ANI_STATS      = 8,    /* ANI statistics */
            HAL_DIAG_RFGAIN         = 9,    /* RfGain GAIN_VALUES */
            HAL_DIAG_RFGAIN_CURSTEP = 10,   /* RfGain GAIN_OPTIMIZATION_STEP */
            HAL_DIAG_PCDAC          = 11,   /* PCDAC table */
            HAL_DIAG_TXRATES        = 12,   /* Transmit rate table */
            HAL_DIAG_REGS           = 13,   /* Registers */
            HAL_DIAG_ANI_CMD        = 14,   /* ANI issue command (XXX do not change!) */
            HAL_DIAG_SETKEY         = 15,   /* Set keycache backdoor */
            HAL_DIAG_RESETKEY       = 16,   /* Reset keycache backdoor */
            HAL_DIAG_EEREAD         = 17,   /* Read EEPROM word */
            HAL_DIAG_EEWRITE        = 18,   /* Write EEPROM word */
            /* 19-26 removed, do not reuse */
            HAL_DIAG_RDWRITE        = 27,   /* Write regulatory domain */
            HAL_DIAG_RDREAD         = 28,   /* Get regulatory domain */
            HAL_DIAG_FATALERR       = 29,   /* Read cached interrupt state */
            HAL_DIAG_11NCOMPAT      = 30,   /* 11n compatibility tweaks */
            HAL_DIAG_ANI_PARAMS     = 31,   /* ANI noise immunity parameters */
            HAL_DIAG_CHECK_HANGS    = 32,   /* check h/w hangs */
            HAL_DIAG_SETREGS        = 33,   /* write registers */
            HAL_DIAG_CHANSURVEY     = 34,   /* channel survey */
            HAL_DIAG_PRINT_REG      = 35,
            HAL_DIAG_PRINT_REG_ALL  = 36,
            HAL_DIAG_CHANNELS       = 37,
            HAL_DIAG_PRINT_REG_COUNTER      = 38,
    };
    
    #endif /* _ATH_AH_DIAGCODES_H_ */

Cache object: 6979b1aee8c280db3984f1ef518d5195