FreeBSD/Linux Kernel Cross Reference
sys/dev/ath/ath_hal/ar5211/ar5211_misc.c

     /*-
      * SPDX-License-Identifier: ISC
      *
      * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
      * Copyright (c) 2002-2006 Atheros Communications, Inc.
      *
      * Permission to use, copy, modify, and/or distribute this software for any
      * purpose with or without fee is hereby granted, provided that the above
      * copyright notice and this permission notice appear in all copies.
     *
     * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
     * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
     * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
     * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
     * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
     * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
     * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
     *
     * $FreeBSD$
     */
    #include "opt_ah.h"
    
    #include "ah.h"
    #include "ah_internal.h"
    
    #include "ar5211/ar5211.h"
    #include "ar5211/ar5211reg.h"
    #include "ar5211/ar5211phy.h"
    
    #include "ah_eeprom_v3.h"
    
    #define AR_NUM_GPIO     6               /* 6 GPIO bits */
    #define AR_GPIOD_MASK   0x2f            /* 6-bit mask */
    
    void
    ar5211GetMacAddress(struct ath_hal *ah, uint8_t *mac)
    {
            struct ath_hal_5211 *ahp = AH5211(ah);
    
            OS_MEMCPY(mac, ahp->ah_macaddr, IEEE80211_ADDR_LEN);
    }
    
    HAL_BOOL
    ar5211SetMacAddress(struct ath_hal *ah, const uint8_t *mac)
    {
            struct ath_hal_5211 *ahp = AH5211(ah);
    
            OS_MEMCPY(ahp->ah_macaddr, mac, IEEE80211_ADDR_LEN);
            return AH_TRUE;
    }
    
    void
    ar5211GetBssIdMask(struct ath_hal *ah, uint8_t *mask)
    {
            static const uint8_t ones[IEEE80211_ADDR_LEN] =
                    { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
            OS_MEMCPY(mask, ones, IEEE80211_ADDR_LEN);
    }
    
    HAL_BOOL
    ar5211SetBssIdMask(struct ath_hal *ah, const uint8_t *mask)
    {
            return AH_FALSE;
    }
    
    /*
     * Read 16 bits of data from the specified EEPROM offset.
     */
    HAL_BOOL
    ar5211EepromRead(struct ath_hal *ah, u_int off, uint16_t *data)
    {
            OS_REG_WRITE(ah, AR_EEPROM_ADDR, off);
            OS_REG_WRITE(ah, AR_EEPROM_CMD, AR_EEPROM_CMD_READ);
    
            if (!ath_hal_wait(ah, AR_EEPROM_STS,
                AR_EEPROM_STS_READ_COMPLETE | AR_EEPROM_STS_READ_ERROR,
                AR_EEPROM_STS_READ_COMPLETE)) {
                    HALDEBUG(ah, HAL_DEBUG_ANY,
                        "%s: read failed for entry 0x%x\n", __func__, off);
                    return AH_FALSE;
            }
            *data = OS_REG_READ(ah, AR_EEPROM_DATA) & 0xffff;
            return AH_TRUE;
    }
    
    #ifdef AH_SUPPORT_WRITE_EEPROM
    /*
     * Write 16 bits of data to the specified EEPROM offset.
     */
    HAL_BOOL
    ar5211EepromWrite(struct ath_hal *ah, u_int off, uint16_t data)
    {
            return AH_FALSE;
    }
    #endif /* AH_SUPPORT_WRITE_EEPROM */
    
    /*
     * Attempt to change the cards operating regulatory domain to the given value
     */
   HAL_BOOL
   ar5211SetRegulatoryDomain(struct ath_hal *ah,
           uint16_t regDomain, HAL_STATUS *status)
   {
           HAL_STATUS ecode;
   
           if (AH_PRIVATE(ah)->ah_currentRD == regDomain) {
                   ecode = HAL_EINVAL;
                   goto bad;
           }
           /*
            * Check if EEPROM is configured to allow this; must
            * be a proper version and the protection bits must
            * permit re-writing that segment of the EEPROM.
            */
           if (ath_hal_eepromGetFlag(ah, AR_EEP_WRITEPROTECT)) {
                   ecode = HAL_EEWRITE;
                   goto bad;
           }
   #ifdef AH_SUPPORT_WRITE_REGDOMAIN
           if (ar5211EepromWrite(ah, AR_EEPROM_REG_DOMAIN, regDomain)) {
                   HALDEBUG(ah, HAL_DEBUG_ANY,
                       "%s: set regulatory domain to %u (0x%x)\n",
                       __func__, regDomain, regDomain);
                   AH_PRIVATE(ah)->ah_currentRD = regDomain;
                   return AH_TRUE;
           }
   #endif
           ecode = HAL_EIO;
   bad:
           if (status)
                   *status = ecode;
           return AH_FALSE;
   }
   
   /*
    * Return the wireless modes (a,b,g,t) supported by hardware.
    *
    * This value is what is actually supported by the hardware
    * and is unaffected by regulatory/country code settings.
    *
    */
   u_int
   ar5211GetWirelessModes(struct ath_hal *ah)
   {
           u_int mode = 0;
   
           if (ath_hal_eepromGetFlag(ah, AR_EEP_AMODE)) {
                   mode = HAL_MODE_11A;
                   if (!ath_hal_eepromGetFlag(ah, AR_EEP_TURBO5DISABLE))
                           mode |= HAL_MODE_TURBO | HAL_MODE_108A;
           }
           if (ath_hal_eepromGetFlag(ah, AR_EEP_BMODE))
                   mode |= HAL_MODE_11B;
           return mode;
   }
   
   #if 0
   HAL_BOOL
   ar5211GetTurboDisable(struct ath_hal *ah)
   {
           return (AH5211(ah)->ah_turboDisable != 0);
   }
   #endif
   
   /*
    * Called if RfKill is supported (according to EEPROM).  Set the interrupt and
    * GPIO values so the ISR and can disable RF on a switch signal
    */
   void
   ar5211EnableRfKill(struct ath_hal *ah)
   {
           uint16_t rfsilent = AH_PRIVATE(ah)->ah_rfsilent;
           int select = MS(rfsilent, AR_EEPROM_RFSILENT_GPIO_SEL);
           int polarity = MS(rfsilent, AR_EEPROM_RFSILENT_POLARITY);
   
           /*
            * Configure the desired GPIO port for input
            * and enable baseband rf silence.
            */
           ar5211GpioCfgInput(ah, select);
           OS_REG_SET_BIT(ah, AR_PHY_BASE, 0x00002000);
           /*
            * If radio disable switch connection to GPIO bit x is enabled
            * program GPIO interrupt.
            * If rfkill bit on eeprom is 1, setupeeprommap routine has already
            * verified that it is a later version of eeprom, it has a place for
            * rfkill bit and it is set to 1, indicating that GPIO bit x hardware
            * connection is present.
            */
           ar5211GpioSetIntr(ah, select, (ar5211GpioGet(ah, select) != polarity));
   }
   
   /*
    * Configure GPIO Output lines
    */
   HAL_BOOL
   ar5211GpioCfgOutput(struct ath_hal *ah, uint32_t gpio, HAL_GPIO_MUX_TYPE type)
   {
           uint32_t reg;
   
           HALASSERT(gpio < AR_NUM_GPIO);
   
           reg =  OS_REG_READ(ah, AR_GPIOCR);
           reg &= ~(AR_GPIOCR_0_CR_A << (gpio * AR_GPIOCR_CR_SHIFT));
           reg |= AR_GPIOCR_0_CR_A << (gpio * AR_GPIOCR_CR_SHIFT);
   
           OS_REG_WRITE(ah, AR_GPIOCR, reg);
           return AH_TRUE;
   }
   
   /*
    * Configure GPIO Input lines
    */
   HAL_BOOL
   ar5211GpioCfgInput(struct ath_hal *ah, uint32_t gpio)
   {
           uint32_t reg;
   
           HALASSERT(gpio < AR_NUM_GPIO);
   
           reg =  OS_REG_READ(ah, AR_GPIOCR);
           reg &= ~(AR_GPIOCR_0_CR_A << (gpio * AR_GPIOCR_CR_SHIFT));
           reg |= AR_GPIOCR_0_CR_N << (gpio * AR_GPIOCR_CR_SHIFT);
   
           OS_REG_WRITE(ah, AR_GPIOCR, reg);
           return AH_TRUE;
   }
   
   /*
    * Once configured for I/O - set output lines
    */
   HAL_BOOL
   ar5211GpioSet(struct ath_hal *ah, uint32_t gpio, uint32_t val)
   {
           uint32_t reg;
   
           HALASSERT(gpio < AR_NUM_GPIO);
   
           reg =  OS_REG_READ(ah, AR_GPIODO);
           reg &= ~(1 << gpio);
           reg |= (val&1) << gpio;
   
           OS_REG_WRITE(ah, AR_GPIODO, reg);
           return AH_TRUE;
   }
   
   /*
    * Once configured for I/O - get input lines
    */
   uint32_t
   ar5211GpioGet(struct ath_hal *ah, uint32_t gpio)
   {
           if (gpio < AR_NUM_GPIO) {
                   uint32_t val = OS_REG_READ(ah, AR_GPIODI);
                   val = ((val & AR_GPIOD_MASK) >> gpio) & 0x1;
                   return val;
           } else  {
                   return 0xffffffff;
           }
   }
   
   /*
    * Set the GPIO 0 Interrupt (gpio is ignored)
    */
   void
   ar5211GpioSetIntr(struct ath_hal *ah, u_int gpio, uint32_t ilevel)
   {
           uint32_t val = OS_REG_READ(ah, AR_GPIOCR);
   
           /* Clear the bits that we will modify. */
           val &= ~(AR_GPIOCR_INT_SEL0 | AR_GPIOCR_INT_SELH | AR_GPIOCR_INT_ENA |
                           AR_GPIOCR_0_CR_A);
   
           val |= AR_GPIOCR_INT_SEL0 | AR_GPIOCR_INT_ENA;
           if (ilevel)
                   val |= AR_GPIOCR_INT_SELH;
   
           /* Don't need to change anything for low level interrupt. */
           OS_REG_WRITE(ah, AR_GPIOCR, val);
   
           /* Change the interrupt mask. */
           ar5211SetInterrupts(ah, AH5211(ah)->ah_maskReg | HAL_INT_GPIO);
   }
   
   /*
    * Change the LED blinking pattern to correspond to the connectivity
    */
   void
   ar5211SetLedState(struct ath_hal *ah, HAL_LED_STATE state)
   {
           static const uint32_t ledbits[8] = {
                   AR_PCICFG_LEDCTL_NONE|AR_PCICFG_LEDMODE_PROP, /* HAL_LED_INIT */
                   AR_PCICFG_LEDCTL_PEND|AR_PCICFG_LEDMODE_PROP, /* HAL_LED_SCAN */
                   AR_PCICFG_LEDCTL_PEND|AR_PCICFG_LEDMODE_PROP, /* HAL_LED_AUTH */
                   AR_PCICFG_LEDCTL_ASSOC|AR_PCICFG_LEDMODE_PROP,/* HAL_LED_ASSOC*/
                   AR_PCICFG_LEDCTL_ASSOC|AR_PCICFG_LEDMODE_PROP,/* HAL_LED_RUN */
                   AR_PCICFG_LEDCTL_NONE|AR_PCICFG_LEDMODE_RAND,
                   AR_PCICFG_LEDCTL_NONE|AR_PCICFG_LEDMODE_RAND,
                   AR_PCICFG_LEDCTL_NONE|AR_PCICFG_LEDMODE_RAND,
           };
           OS_REG_WRITE(ah, AR_PCICFG,
                   (OS_REG_READ(ah, AR_PCICFG) &~
                           (AR_PCICFG_LEDCTL | AR_PCICFG_LEDMODE))
                   | ledbits[state & 0x7]
           );
   }
   
   /*
    * Change association related fields programmed into the hardware.
    * Writing a valid BSSID to the hardware effectively enables the hardware
    * to synchronize its TSF to the correct beacons and receive frames coming
    * from that BSSID. It is called by the SME JOIN operation.
    */
   void
   ar5211WriteAssocid(struct ath_hal *ah, const uint8_t *bssid, uint16_t assocId)
   {
           struct ath_hal_5211 *ahp = AH5211(ah);
   
           /* XXX save bssid for possible re-use on reset */
           OS_MEMCPY(ahp->ah_bssid, bssid, IEEE80211_ADDR_LEN);
           OS_REG_WRITE(ah, AR_BSS_ID0, LE_READ_4(ahp->ah_bssid));
           OS_REG_WRITE(ah, AR_BSS_ID1, LE_READ_2(ahp->ah_bssid+4) |
                                        ((assocId & 0x3fff)<<AR_BSS_ID1_AID_S));
   }
   
   /*
    * Get the current hardware tsf for stamlme.
    */
   uint64_t
   ar5211GetTsf64(struct ath_hal *ah)
   {
           uint32_t low1, low2, u32;
   
           /* sync multi-word read */
           low1 = OS_REG_READ(ah, AR_TSF_L32);
           u32 = OS_REG_READ(ah, AR_TSF_U32);
           low2 = OS_REG_READ(ah, AR_TSF_L32);
           if (low2 < low1) {      /* roll over */
                   /*
                    * If we are not preempted this will work.  If we are
                    * then we re-reading AR_TSF_U32 does no good as the
                    * low bits will be meaningless.  Likewise reading
                    * L32, U32, U32, then comparing the last two reads
                    * to check for rollover doesn't help if preempted--so
                    * we take this approach as it costs one less PCI
                    * read which can be noticeable when doing things
                    * like timestamping packets in monitor mode.
                    */
                   u32++;
           }
           return (((uint64_t) u32) << 32) | ((uint64_t) low2);
   }
   
   /*
    * Get the current hardware tsf for stamlme.
    */
   uint32_t
   ar5211GetTsf32(struct ath_hal *ah)
   {
           return OS_REG_READ(ah, AR_TSF_L32);
   }
   
   /*
    * Reset the current hardware tsf for stamlme
    */
   void
   ar5211ResetTsf(struct ath_hal *ah)
   {
           uint32_t val = OS_REG_READ(ah, AR_BEACON);
   
           OS_REG_WRITE(ah, AR_BEACON, val | AR_BEACON_RESET_TSF);
   }
   
   /*
    * Grab a semi-random value from hardware registers - may not
    * change often
    */
   uint32_t
   ar5211GetRandomSeed(struct ath_hal *ah)
   {
           uint32_t nf;
   
           nf = (OS_REG_READ(ah, AR_PHY(25)) >> 19) & 0x1ff;
           if (nf & 0x100)
                   nf = 0 - ((nf ^ 0x1ff) + 1);
           return (OS_REG_READ(ah, AR_TSF_U32) ^
                   OS_REG_READ(ah, AR_TSF_L32) ^ nf);
   }
   
   /*
    * Detect if our card is present
    */
   HAL_BOOL
   ar5211DetectCardPresent(struct ath_hal *ah)
   {
           uint16_t macVersion, macRev;
           uint32_t v;
   
           /*
            * Read the Silicon Revision register and compare that
            * to what we read at attach time.  If the same, we say
            * a card/device is present.
            */
           v = OS_REG_READ(ah, AR_SREV) & AR_SREV_ID_M;
           macVersion = v >> AR_SREV_ID_S;
           macRev = v & AR_SREV_REVISION_M;
           return (AH_PRIVATE(ah)->ah_macVersion == macVersion &&
                   AH_PRIVATE(ah)->ah_macRev == macRev);
   }
   
   /*
    * Update MIB Counters
    */
   void
   ar5211UpdateMibCounters(struct ath_hal *ah, HAL_MIB_STATS *stats)
   {
           stats->ackrcv_bad += OS_REG_READ(ah, AR_ACK_FAIL);
           stats->rts_bad    += OS_REG_READ(ah, AR_RTS_FAIL);
           stats->fcs_bad    += OS_REG_READ(ah, AR_FCS_FAIL);
           stats->rts_good   += OS_REG_READ(ah, AR_RTS_OK);
           stats->beacons    += OS_REG_READ(ah, AR_BEACON_CNT);
   }
   
   HAL_BOOL
   ar5211SetSifsTime(struct ath_hal *ah, u_int us)
   {
           struct ath_hal_5211 *ahp = AH5211(ah);
   
           if (us > ath_hal_mac_usec(ah, 0xffff)) {
                   HALDEBUG(ah, HAL_DEBUG_ANY, "%s: bad SIFS time %u\n",
                       __func__, us);
                   ahp->ah_sifstime = (u_int) -1;  /* restore default handling */
                   return AH_FALSE;
           } else {
                   /* convert to system clocks */
                   OS_REG_WRITE(ah, AR_D_GBL_IFS_SIFS, ath_hal_mac_clks(ah, us));
                   ahp->ah_slottime = us;
                   return AH_TRUE;
           }
   }
   
   u_int
   ar5211GetSifsTime(struct ath_hal *ah)
   {
           u_int clks = OS_REG_READ(ah, AR_D_GBL_IFS_SIFS) & 0xffff;
           return ath_hal_mac_usec(ah, clks);      /* convert from system clocks */
   }
   
   HAL_BOOL
   ar5211SetSlotTime(struct ath_hal *ah, u_int us)
   {
           struct ath_hal_5211 *ahp = AH5211(ah);
   
           if (us < HAL_SLOT_TIME_9 || us > ath_hal_mac_usec(ah, 0xffff)) {
                   HALDEBUG(ah, HAL_DEBUG_ANY, "%s: bad slot time %u\n",
                       __func__, us);
                   ahp->ah_slottime = us;  /* restore default handling */
                   return AH_FALSE;
           } else {
                   /* convert to system clocks */
                   OS_REG_WRITE(ah, AR_D_GBL_IFS_SLOT, ath_hal_mac_clks(ah, us));
                   ahp->ah_slottime = us;
                   return AH_TRUE;
           }
   }
   
   u_int
   ar5211GetSlotTime(struct ath_hal *ah)
   {
           u_int clks = OS_REG_READ(ah, AR_D_GBL_IFS_SLOT) & 0xffff;
           return ath_hal_mac_usec(ah, clks);      /* convert from system clocks */
   }
   
   HAL_BOOL
   ar5211SetAckTimeout(struct ath_hal *ah, u_int us)
   {
           struct ath_hal_5211 *ahp = AH5211(ah);
   
           if (us > ath_hal_mac_usec(ah, MS(0xffffffff, AR_TIME_OUT_ACK))) {
                   HALDEBUG(ah, HAL_DEBUG_ANY, "%s: bad ack timeout %u\n",
                       __func__, us);
                   ahp->ah_acktimeout = (u_int) -1; /* restore default handling */
                   return AH_FALSE;
           } else {
                   /* convert to system clocks */
                   OS_REG_RMW_FIELD(ah, AR_TIME_OUT,
                           AR_TIME_OUT_ACK, ath_hal_mac_clks(ah, us));
                   ahp->ah_acktimeout = us;
                   return AH_TRUE;
           }
   }
   
   u_int
   ar5211GetAckTimeout(struct ath_hal *ah)
   {
           u_int clks = MS(OS_REG_READ(ah, AR_TIME_OUT), AR_TIME_OUT_ACK);
           return ath_hal_mac_usec(ah, clks);      /* convert from system clocks */
   }
   
   u_int
   ar5211GetAckCTSRate(struct ath_hal *ah)
   {
           return ((AH5211(ah)->ah_staId1Defaults & AR_STA_ID1_ACKCTS_6MB) == 0);
   }
   
   HAL_BOOL
   ar5211SetAckCTSRate(struct ath_hal *ah, u_int high)
   {
           struct ath_hal_5211 *ahp = AH5211(ah);
   
           if (high) {
                   OS_REG_CLR_BIT(ah, AR_STA_ID1, AR_STA_ID1_ACKCTS_6MB);
                   ahp->ah_staId1Defaults &= ~AR_STA_ID1_ACKCTS_6MB;
           } else {
                   OS_REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_ACKCTS_6MB);
                   ahp->ah_staId1Defaults |= AR_STA_ID1_ACKCTS_6MB;
           }
           return AH_TRUE;
   }
   
   HAL_BOOL
   ar5211SetCTSTimeout(struct ath_hal *ah, u_int us)
   {
           struct ath_hal_5211 *ahp = AH5211(ah);
   
           if (us > ath_hal_mac_usec(ah, MS(0xffffffff, AR_TIME_OUT_CTS))) {
                   HALDEBUG(ah, HAL_DEBUG_ANY, "%s: bad cts timeout %u\n",
                       __func__, us);
                   ahp->ah_ctstimeout = (u_int) -1; /* restore default handling */
                   return AH_FALSE;
           } else {
                   /* convert to system clocks */
                   OS_REG_RMW_FIELD(ah, AR_TIME_OUT,
                           AR_TIME_OUT_CTS, ath_hal_mac_clks(ah, us));
                   ahp->ah_ctstimeout = us;
                   return AH_TRUE;
           }
   }
   
   u_int
   ar5211GetCTSTimeout(struct ath_hal *ah)
   {
           u_int clks = MS(OS_REG_READ(ah, AR_TIME_OUT), AR_TIME_OUT_CTS);
           return ath_hal_mac_usec(ah, clks);      /* convert from system clocks */
   }
   
   HAL_BOOL
   ar5211SetDecompMask(struct ath_hal *ah, uint16_t keyidx, int en)
   {
           /* nothing to do */
           return AH_TRUE;
   }
   
   void
   ar5211SetCoverageClass(struct ath_hal *ah, uint8_t coverageclass, int now)
   {
   }
   
   HAL_STATUS
   ar5211SetQuiet(struct ath_hal *ah, uint32_t period, uint32_t duration,
       uint32_t next_start, HAL_QUIET_FLAG flags)
   {
           return HAL_OK;
   }
   
   /*
    * Control Adaptive Noise Immunity Parameters
    */
   HAL_BOOL
   ar5211AniControl(struct ath_hal *ah, HAL_ANI_CMD cmd, int param)
   {
           return AH_FALSE;
   }
   
   void
   ar5211AniPoll(struct ath_hal *ah, const struct ieee80211_channel *chan)
   {
   }
   
   void
   ar5211RxMonitor(struct ath_hal *ah, const HAL_NODE_STATS *stats,
           const struct ieee80211_channel *chan)
   {
   }
   
   void
   ar5211MibEvent(struct ath_hal *ah, const HAL_NODE_STATS *stats)
   {
   }
   
   /*
    * Get the rssi of frame curently being received.
    */
   uint32_t
   ar5211GetCurRssi(struct ath_hal *ah)
   {
           return (OS_REG_READ(ah, AR_PHY_CURRENT_RSSI) & 0xff);
   }
   
   u_int
   ar5211GetDefAntenna(struct ath_hal *ah)
   {   
           return (OS_REG_READ(ah, AR_DEF_ANTENNA) & 0x7);
   }   
   
   void
   ar5211SetDefAntenna(struct ath_hal *ah, u_int antenna)
   {
           OS_REG_WRITE(ah, AR_DEF_ANTENNA, (antenna & 0x7));
   }
   
   HAL_ANT_SETTING
   ar5211GetAntennaSwitch(struct ath_hal *ah)
   {
           return AH5211(ah)->ah_diversityControl;
   }
   
   HAL_BOOL
   ar5211SetAntennaSwitch(struct ath_hal *ah, HAL_ANT_SETTING settings)
   {
           const struct ieee80211_channel *chan = AH_PRIVATE(ah)->ah_curchan;
   
           if (chan == AH_NULL) {
                   AH5211(ah)->ah_diversityControl = settings;
                   return AH_TRUE;
           }
           return ar5211SetAntennaSwitchInternal(ah, settings, chan);
   }
   
   HAL_STATUS
   ar5211GetCapability(struct ath_hal *ah, HAL_CAPABILITY_TYPE type,
           uint32_t capability, uint32_t *result)
   {
   
           switch (type) {
           case HAL_CAP_CIPHER:            /* cipher handled in hardware */
                   switch (capability) {
                   case HAL_CIPHER_AES_OCB:
                   case HAL_CIPHER_WEP:
                   case HAL_CIPHER_CLR:
                           return HAL_OK;
                   default:
                           return HAL_ENOTSUPP;
                   }
           default:
                   return ath_hal_getcapability(ah, type, capability, result);
           }
   }
   
   HAL_BOOL
   ar5211SetCapability(struct ath_hal *ah, HAL_CAPABILITY_TYPE type,
           uint32_t capability, uint32_t setting, HAL_STATUS *status)
   {
           switch (type) {
           case HAL_CAP_DIAG:              /* hardware diagnostic support */
                   /*
                    * NB: could split this up into virtual capabilities,
                    *     (e.g. 1 => ACK, 2 => CTS, etc.) but it hardly
                    *     seems worth the additional complexity.
                    */
   #ifdef AH_DEBUG
                   AH_PRIVATE(ah)->ah_diagreg = setting;
   #else
                   AH_PRIVATE(ah)->ah_diagreg = setting & 0x6;     /* ACK+CTS */
   #endif
                   OS_REG_WRITE(ah, AR_DIAG_SW, AH_PRIVATE(ah)->ah_diagreg);
                   return AH_TRUE;
           default:
                   return ath_hal_setcapability(ah, type, capability,
                           setting, status);
           }
   }
   
   HAL_BOOL
   ar5211GetDiagState(struct ath_hal *ah, int request,
           const void *args, uint32_t argsize,
           void **result, uint32_t *resultsize)
   {
           struct ath_hal_5211 *ahp = AH5211(ah);
   
           (void) ahp;
           if (ath_hal_getdiagstate(ah, request, args, argsize, result, resultsize))
                   return AH_TRUE;
           switch (request) {
           case HAL_DIAG_EEPROM:
                   return ath_hal_eepromDiag(ah, request,
                       args, argsize, result, resultsize);
           case HAL_DIAG_RFGAIN:
                   *result = &ahp->ah_gainValues;
                   *resultsize = sizeof(GAIN_VALUES);
                   return AH_TRUE;
           case HAL_DIAG_RFGAIN_CURSTEP:
                   *result = __DECONST(void *, ahp->ah_gainValues.currStep);
                   *resultsize = (*result == AH_NULL) ?
                           0 : sizeof(GAIN_OPTIMIZATION_STEP);
                   return AH_TRUE;
           }
           return AH_FALSE;
   }
   
   /*
    * Return what percentage of the extension channel is busy.
    * This is always disabled for AR5211 series NICs.
    */
   uint32_t
   ar5211Get11nExtBusy(struct ath_hal *ah)
   {
           return (0);
   }
   
   /*
    * There's no channel survey support for the AR5211.
    */
   HAL_BOOL
   ar5211GetMibCycleCounts(struct ath_hal *ah, HAL_SURVEY_SAMPLE *hsample)
   {
   
           return (AH_FALSE);
   }
   
   void
   ar5211SetChainMasks(struct ath_hal *ah, uint32_t txchainmask,
       uint32_t rxchainmask)
   {
   }
   
   void
   ar5211EnableDfs(struct ath_hal *ah, HAL_PHYERR_PARAM *pe)
   {
   }
   
   void
   ar5211GetDfsThresh(struct ath_hal *ah, HAL_PHYERR_PARAM *pe)
   {
   }
   
   /*
    * Get the current NAV value from the hardware.
    */
   u_int
   ar5211GetNav(struct ath_hal *ah)
   {
           uint32_t reg;
   
           reg = OS_REG_READ(ah, AR_NAV);
           return (reg);
   }
   
   /*
    * Set the current NAV value to the hardware.
    */
   void
   ar5211SetNav(struct ath_hal *ah, u_int val)
   {
   
           OS_REG_WRITE(ah, AR_NAV, val);
   }
   

Cache object: bb5754e7663c65d1c6155605da65e6f2