1 /*-
2 * 1. Redistributions of source code must retain the
3 * Copyright (c) 1997 Amancio Hasty, 1999 Roger Hardiman
4 * All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * 3. All advertising materials mentioning features or use of this software
15 * must display the following acknowledgement:
16 * This product includes software developed by Amancio Hasty and
17 * Roger Hardiman
18 * 4. The name of the author may not be used to endorse or promote products
19 * derived from this software without specific prior written permission.
20 *
21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
22 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
23 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
24 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
25 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
26 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
27 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
29 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
30 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
31 * POSSIBILITY OF SUCH DAMAGE.
32 */
33 /*-
34 * 1. Redistributions of source code must retain the
35 * Copyright (c) 1995 Mark Tinguely and Jim Lowe
36 * All rights reserved.
37 *
38 * Redistribution and use in source and binary forms, with or without
39 * modification, are permitted provided that the following conditions
40 * are met:
41 * 1. Redistributions of source code must retain the above copyright
42 * notice, this list of conditions and the following disclaimer.
43 * 2. Redistributions in binary form must reproduce the above copyright
44 * notice, this list of conditions and the following disclaimer in the
45 * documentation and/or other materials provided with the distribution.
46 * 3. All advertising materials mentioning features or use of this software
47 * must display the following acknowledgement:
48 * This product includes software developed by Mark Tinguely and Jim Lowe
49 * 4. The name of the author may not be used to endorse or promote products
50 * derived from this software without specific prior written permission.
51 *
52 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
53 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
54 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
55 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
56 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
57 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
58 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
59 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
60 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
61 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
62 * POSSIBILITY OF SUCH DAMAGE.
63 */
64
65 #include <sys/cdefs.h>
66 __FBSDID("$FreeBSD$");
67
68 /*
69 * This is part of the Driver for Video Capture Cards (Frame grabbers)
70 * and TV Tuner cards using the Brooktree Bt848, Bt848A, Bt849A, Bt878, Bt879
71 * chipset.
72 * Copyright Roger Hardiman and Amancio Hasty.
73 *
74 * bktr_core : This deals with the Bt848/849/878/879 PCI Frame Grabber,
75 * Handles all the open, close, ioctl and read userland calls.
76 * Sets the Bt848 registers and generates RISC pograms.
77 * Controls the i2c bus and GPIO interface.
78 * Contains the interface to the kernel.
79 * (eg probe/attach and open/close/ioctl)
80 */
81
82 /*
83 The Brooktree BT848 Driver driver is based upon Mark Tinguely and
84 Jim Lowe's driver for the Matrox Meteor PCI card . The
85 Philips SAA 7116 and SAA 7196 are very different chipsets than
86 the BT848.
87
88 The original copyright notice by Mark and Jim is included mostly
89 to honor their fantastic work in the Matrox Meteor driver!
90 */
91
92 #include "opt_bktr.h" /* Include any kernel config options */
93
94 #if ( \
95 (defined(__FreeBSD__)) \
96 || (defined(__bsdi__)) \
97 || (defined(__OpenBSD__)) \
98 || (defined(__NetBSD__)) \
99 )
100
101
102 /*******************/
103 /* *** FreeBSD *** */
104 /*******************/
105 #ifdef __FreeBSD__
106
107 #include <sys/param.h>
108 #include <sys/systm.h>
109 #include <sys/kernel.h>
110 #include <sys/fcntl.h>
111 #include <sys/lock.h>
112 #include <sys/mutex.h>
113 #include <sys/proc.h>
114 #include <sys/signalvar.h>
115 #include <sys/selinfo.h>
116 #include <sys/uio.h>
117
118 #include <vm/vm.h>
119 #include <vm/vm_kern.h>
120 #include <vm/pmap.h>
121 #include <vm/vm_extern.h>
122
123 #include <sys/bus.h> /* used by smbus and newbus */
124
125 #if (__FreeBSD_version < 500000)
126 #include <machine/clock.h> /* for DELAY */
127 #define PROC_LOCK(p)
128 #define PROC_UNLOCK(p)
129 #include <pci/pcivar.h>
130 #else
131 #include <dev/pci/pcivar.h>
132 #endif
133
134 #include <machine/bus.h>
135 #include <sys/bus.h>
136
137 #include <dev/bktr/ioctl_meteor.h>
138 #include <dev/bktr/ioctl_bt848.h> /* extensions to ioctl_meteor.h */
139 #include <dev/bktr/bktr_reg.h>
140 #include <dev/bktr/bktr_tuner.h>
141 #include <dev/bktr/bktr_card.h>
142 #include <dev/bktr/bktr_audio.h>
143 #include <dev/bktr/bktr_os.h>
144 #include <dev/bktr/bktr_core.h>
145 #if defined(BKTR_FREEBSD_MODULE)
146 #include <dev/bktr/bktr_mem.h>
147 #endif
148
149 #if defined(BKTR_USE_FREEBSD_SMBUS)
150 #include <dev/bktr/bktr_i2c.h>
151 #include <dev/smbus/smbconf.h>
152 #include <dev/iicbus/iiconf.h>
153 #include "smbus_if.h"
154 #include "iicbus_if.h"
155 #endif
156
157 const char *
158 bktr_name(bktr_ptr_t bktr)
159 {
160 return bktr->bktr_xname;
161 }
162
163
164 #endif /* __FreeBSD__ */
165
166
167 /****************/
168 /* *** BSDI *** */
169 /****************/
170 #ifdef __bsdi__
171 #define PROC_LOCK(p)
172 #define PROC_UNLOCK(p)
173 #endif /* __bsdi__ */
174
175
176 /**************************/
177 /* *** OpenBSD/NetBSD *** */
178 /**************************/
179 #if defined(__NetBSD__) || defined(__OpenBSD__)
180
181 #include <sys/param.h>
182 #include <sys/systm.h>
183 #include <sys/kernel.h>
184 #include <sys/signalvar.h>
185 #include <sys/vnode.h>
186
187 #ifdef __NetBSD__
188 #include <uvm/uvm_extern.h>
189 #else
190 #include <vm/vm.h>
191 #include <vm/vm_kern.h>
192 #include <vm/pmap.h>
193 #include <vm/vm_extern.h>
194 #endif
195
196 #include <sys/inttypes.h> /* uintptr_t */
197 #include <dev/ic/bt8xx.h>
198 #include <dev/pci/bktr/bktr_reg.h>
199 #include <dev/pci/bktr/bktr_tuner.h>
200 #include <dev/pci/bktr/bktr_card.h>
201 #include <dev/pci/bktr/bktr_audio.h>
202 #include <dev/pci/bktr/bktr_core.h>
203 #include <dev/pci/bktr/bktr_os.h>
204
205 static int bt848_format = -1;
206
207 const char *
208 bktr_name(bktr_ptr_t bktr)
209 {
210 return (bktr->bktr_dev.dv_xname);
211 }
212
213 #define PROC_LOCK(p)
214 #define PROC_UNLOCK(p)
215
216 #endif /* __NetBSD__ || __OpenBSD__ */
217
218
219 typedef u_char bool_t;
220
221 #define BKTRPRI (PZERO+8)|PCATCH
222 #define VBIPRI (PZERO-4)|PCATCH
223
224
225 /*
226 * memory allocated for DMA programs
227 */
228 #define DMA_PROG_ALLOC (8 * PAGE_SIZE)
229
230 /* When to split a dma transfer , the bt848 has timing as well as
231 dma transfer size limitations so that we have to split dma
232 transfers into two dma requests
233 */
234 #define DMA_BT848_SPLIT 319*2
235
236 /*
237 * Allocate enough memory for:
238 * 768x576 RGB 16 or YUV (16 storage bits/pixel) = 884736 = 216 pages
239 *
240 * You may override this using the options "BROOKTREE_ALLOC_PAGES=value"
241 * in your kernel configuration file.
242 */
243
244 #ifndef BROOKTREE_ALLOC_PAGES
245 #define BROOKTREE_ALLOC_PAGES 217*4
246 #endif
247 #define BROOKTREE_ALLOC (BROOKTREE_ALLOC_PAGES * PAGE_SIZE)
248
249 /* Definitions for VBI capture.
250 * There are 16 VBI lines in a PAL video field (32 in a frame),
251 * and we take 2044 samples from each line (placed in a 2048 byte buffer
252 * for alignment).
253 * VBI lines are held in a circular buffer before being read by a
254 * user program from /dev/vbi.
255 */
256
257 #define MAX_VBI_LINES 16 /* Maximum for all vidoe formats */
258 #define VBI_LINE_SIZE 2048 /* Store upto 2048 bytes per line */
259 #define VBI_BUFFER_ITEMS 20 /* Number of frames we buffer */
260 #define VBI_DATA_SIZE (VBI_LINE_SIZE * MAX_VBI_LINES * 2)
261 #define VBI_BUFFER_SIZE (VBI_DATA_SIZE * VBI_BUFFER_ITEMS)
262
263
264 /* Defines for fields */
265 #define ODD_F 0x01
266 #define EVEN_F 0x02
267
268
269 /*
270 * Parameters describing size of transmitted image.
271 */
272
273 static struct format_params format_params[] = {
274 /* # define BT848_IFORM_F_AUTO (0x0) - don't matter. */
275 { 525, 26, 480, 910, 135, 754, 640, 780, 30, 0x68, 0x5d, BT848_IFORM_X_AUTO,
276 12, 1600 },
277 /* # define BT848_IFORM_F_NTSCM (0x1) */
278 { 525, 26, 480, 910, 135, 754, 640, 780, 30, 0x68, 0x5d, BT848_IFORM_X_XT0,
279 12, 1600 },
280 /* # define BT848_IFORM_F_NTSCJ (0x2) */
281 { 525, 22, 480, 910, 135, 754, 640, 780, 30, 0x68, 0x5d, BT848_IFORM_X_XT0,
282 12, 1600 },
283 /* # define BT848_IFORM_F_PALBDGHI (0x3) */
284 { 625, 32, 576, 1135, 186, 924, 768, 944, 25, 0x7f, 0x72, BT848_IFORM_X_XT1,
285 16, 2044 },
286 /* # define BT848_IFORM_F_PALM (0x4) */
287 { 525, 22, 480, 910, 135, 754, 640, 780, 30, 0x68, 0x5d, BT848_IFORM_X_XT0,
288 12, 1600 },
289 /* # define BT848_IFORM_F_PALN (0x5) */
290 { 625, 32, 576, 1135, 186, 924, 768, 944, 25, 0x7f, 0x72, BT848_IFORM_X_XT1,
291 16, 2044 },
292 /* # define BT848_IFORM_F_SECAM (0x6) */
293 { 625, 32, 576, 1135, 186, 924, 768, 944, 25, 0x7f, 0xa0, BT848_IFORM_X_XT1,
294 16, 2044 },
295 /* # define BT848_IFORM_F_RSVD (0x7) - ???? */
296 { 625, 32, 576, 1135, 186, 924, 768, 944, 25, 0x7f, 0x72, BT848_IFORM_X_XT0,
297 16, 2044 },
298 };
299
300 /*
301 * Table of supported Pixel Formats
302 */
303
304 static struct meteor_pixfmt_internal {
305 struct meteor_pixfmt public;
306 u_int color_fmt;
307 } pixfmt_table[] = {
308
309 { { 0, METEOR_PIXTYPE_RGB, 2, { 0x7c00, 0x03e0, 0x001f }, 0,0 }, 0x33 },
310 { { 0, METEOR_PIXTYPE_RGB, 2, { 0x7c00, 0x03e0, 0x001f }, 1,0 }, 0x33 },
311
312 { { 0, METEOR_PIXTYPE_RGB, 2, { 0xf800, 0x07e0, 0x001f }, 0,0 }, 0x22 },
313 { { 0, METEOR_PIXTYPE_RGB, 2, { 0xf800, 0x07e0, 0x001f }, 1,0 }, 0x22 },
314
315 { { 0, METEOR_PIXTYPE_RGB, 3, { 0xff0000,0x00ff00,0x0000ff }, 1,0 }, 0x11 },
316
317 { { 0, METEOR_PIXTYPE_RGB, 4, { 0xff0000,0x00ff00,0x0000ff }, 0,0 }, 0x00 },
318 { { 0, METEOR_PIXTYPE_RGB, 4, { 0xff0000,0x00ff00,0x0000ff }, 0,1 }, 0x00 },
319 { { 0, METEOR_PIXTYPE_RGB, 4, { 0xff0000,0x00ff00,0x0000ff }, 1,0 }, 0x00 },
320 { { 0, METEOR_PIXTYPE_RGB, 4, { 0xff0000,0x00ff00,0x0000ff }, 1,1 }, 0x00 },
321 { { 0, METEOR_PIXTYPE_YUV, 2, { 0xff0000,0x00ff00,0x0000ff }, 1,1 }, 0x88 },
322 { { 0, METEOR_PIXTYPE_YUV_PACKED, 2, { 0xff0000,0x00ff00,0x0000ff }, 0,1 }, 0x44 },
323 { { 0, METEOR_PIXTYPE_YUV_12, 2, { 0xff0000,0x00ff00,0x0000ff }, 1,1 }, 0x88 },
324
325 };
326 #define PIXFMT_TABLE_SIZE ( sizeof(pixfmt_table) / sizeof(pixfmt_table[0]) )
327
328 /*
329 * Table of Meteor-supported Pixel Formats (for SETGEO compatibility)
330 */
331
332 /* FIXME: Also add YUV_422 and YUV_PACKED as well */
333 static struct {
334 u_long meteor_format;
335 struct meteor_pixfmt public;
336 } meteor_pixfmt_table[] = {
337 { METEOR_GEO_YUV_12,
338 { 0, METEOR_PIXTYPE_YUV_12, 2, { 0xff0000,0x00ff00,0x0000ff }, 1,1 }
339 },
340
341 /* FIXME: Should byte swap flag be on for this one; negative in drvr? */
342 { METEOR_GEO_YUV_422,
343 { 0, METEOR_PIXTYPE_YUV, 2, { 0xff0000,0x00ff00,0x0000ff }, 1,1 }
344 },
345 { METEOR_GEO_YUV_PACKED,
346 { 0, METEOR_PIXTYPE_YUV_PACKED, 2, { 0xff0000,0x00ff00,0x0000ff }, 0,1 }
347 },
348 { METEOR_GEO_RGB16,
349 { 0, METEOR_PIXTYPE_RGB, 2, { 0x7c00, 0x03e0, 0x001f }, 0, 0 }
350 },
351 { METEOR_GEO_RGB24,
352 { 0, METEOR_PIXTYPE_RGB, 4, { 0xff0000, 0x00ff00, 0x0000ff }, 0, 0 }
353 },
354
355 };
356 #define METEOR_PIXFMT_TABLE_SIZE ( sizeof(meteor_pixfmt_table) / \
357 sizeof(meteor_pixfmt_table[0]) )
358
359
360 #define BSWAP (BT848_COLOR_CTL_BSWAP_ODD | BT848_COLOR_CTL_BSWAP_EVEN)
361 #define WSWAP (BT848_COLOR_CTL_WSWAP_ODD | BT848_COLOR_CTL_WSWAP_EVEN)
362
363
364
365 /* sync detect threshold */
366 #if 0
367 #define SYNC_LEVEL (BT848_ADC_RESERVED | \
368 BT848_ADC_CRUSH) /* threshold ~125 mV */
369 #else
370 #define SYNC_LEVEL (BT848_ADC_RESERVED | \
371 BT848_ADC_SYNC_T) /* threshold ~75 mV */
372 #endif
373
374
375
376
377 /* debug utility for holding previous INT_STAT contents */
378 #define STATUS_SUM
379 static u_long status_sum = 0;
380
381 /*
382 * defines to make certain bit-fiddles understandable
383 */
384 #define FIFO_ENABLED BT848_DMA_CTL_FIFO_EN
385 #define RISC_ENABLED BT848_DMA_CTL_RISC_EN
386 #define FIFO_RISC_ENABLED (BT848_DMA_CTL_FIFO_EN | BT848_DMA_CTL_RISC_EN)
387 #define FIFO_RISC_DISABLED 0
388
389 #define ALL_INTS_DISABLED 0
390 #define ALL_INTS_CLEARED 0xffffffff
391 #define CAPTURE_OFF 0
392
393 #define BIT_SEVEN_HIGH (1<<7)
394 #define BIT_EIGHT_HIGH (1<<8)
395
396 #define I2C_BITS (BT848_INT_RACK | BT848_INT_I2CDONE)
397 #define TDEC_BITS (BT848_INT_FDSR | BT848_INT_FBUS)
398
399
400
401 static int oformat_meteor_to_bt( u_long format );
402
403 static u_int pixfmt_swap_flags( int pixfmt );
404
405 /*
406 * bt848 RISC programming routines.
407 */
408 #ifdef BT848_DUMP
409 static int dump_bt848( bktr_ptr_t bktr );
410 #endif
411
412 static void yuvpack_prog( bktr_ptr_t bktr, char i_flag, int cols,
413 int rows, int interlace );
414 static void yuv422_prog( bktr_ptr_t bktr, char i_flag, int cols,
415 int rows, int interlace );
416 static void yuv12_prog( bktr_ptr_t bktr, char i_flag, int cols,
417 int rows, int interlace );
418 static void rgb_prog( bktr_ptr_t bktr, char i_flag, int cols,
419 int rows, int interlace );
420 static void rgb_vbi_prog( bktr_ptr_t bktr, char i_flag, int cols,
421 int rows, int interlace );
422 static void build_dma_prog( bktr_ptr_t bktr, char i_flag );
423
424 static bool_t getline(bktr_reg_t *, int);
425 static bool_t notclipped(bktr_reg_t * , int , int);
426 static bool_t split(bktr_reg_t *, volatile uint32_t **, int, u_long, int,
427 volatile u_char ** , int );
428
429 static void start_capture( bktr_ptr_t bktr, unsigned type );
430 static void set_fps( bktr_ptr_t bktr, u_short fps );
431
432
433
434 /*
435 * Remote Control Functions
436 */
437 static void remote_read(bktr_ptr_t bktr, struct bktr_remote *remote);
438
439
440 /*
441 * ioctls common to both video & tuner.
442 */
443 static int common_ioctl( bktr_ptr_t bktr, ioctl_cmd_t cmd, caddr_t arg );
444
445
446 #if !defined(BKTR_USE_FREEBSD_SMBUS)
447 /*
448 * i2c primitives for low level control of i2c bus. Added for MSP34xx control
449 */
450 static void i2c_start( bktr_ptr_t bktr);
451 static void i2c_stop( bktr_ptr_t bktr);
452 static int i2c_write_byte( bktr_ptr_t bktr, unsigned char data);
453 static int i2c_read_byte( bktr_ptr_t bktr, unsigned char *data, int last );
454 #endif
455
456
457
458 /*
459 * the common attach code, used by all OS versions.
460 */
461 void
462 common_bktr_attach( bktr_ptr_t bktr, int unit, u_long pci_id, u_int rev )
463 {
464 vm_offset_t buf = 0;
465 int need_to_allocate_memory = 1;
466 #ifdef BKTR_NEW_MSP34XX_DRIVER
467 int err;
468 #endif
469
470 /***************************************/
471 /* *** OS Specific memory routines *** */
472 /***************************************/
473 #if defined(__NetBSD__) || defined(__OpenBSD__)
474 /* allocate space for dma program */
475 bktr->dma_prog = get_bktr_mem(bktr, &bktr->dm_prog,
476 DMA_PROG_ALLOC);
477 bktr->odd_dma_prog = get_bktr_mem(bktr, &bktr->dm_oprog,
478 DMA_PROG_ALLOC);
479
480 /* allocate space for the VBI buffer */
481 bktr->vbidata = get_bktr_mem(bktr, &bktr->dm_vbidata,
482 VBI_DATA_SIZE);
483 bktr->vbibuffer = get_bktr_mem(bktr, &bktr->dm_vbibuffer,
484 VBI_BUFFER_SIZE);
485
486 /* allocate space for pixel buffer */
487 if ( BROOKTREE_ALLOC )
488 buf = get_bktr_mem(bktr, &bktr->dm_mem, BROOKTREE_ALLOC);
489 else
490 buf = 0;
491 #endif
492
493 #if defined(__FreeBSD__) || defined(__bsdi__)
494
495 /* If this is a module, check if there is any currently saved contiguous memory */
496 #if defined(BKTR_FREEBSD_MODULE)
497 if (bktr_has_stored_addresses(unit) == 1) {
498 /* recover the addresses */
499 bktr->dma_prog = bktr_retrieve_address(unit, BKTR_MEM_DMA_PROG);
500 bktr->odd_dma_prog = bktr_retrieve_address(unit, BKTR_MEM_ODD_DMA_PROG);
501 bktr->vbidata = bktr_retrieve_address(unit, BKTR_MEM_VBIDATA);
502 bktr->vbibuffer = bktr_retrieve_address(unit, BKTR_MEM_VBIBUFFER);
503 buf = bktr_retrieve_address(unit, BKTR_MEM_BUF);
504 need_to_allocate_memory = 0;
505 }
506 #endif
507
508 if (need_to_allocate_memory == 1) {
509 /* allocate space for dma program */
510 bktr->dma_prog = get_bktr_mem(unit, DMA_PROG_ALLOC);
511 bktr->odd_dma_prog = get_bktr_mem(unit, DMA_PROG_ALLOC);
512
513 /* allocte space for the VBI buffer */
514 bktr->vbidata = get_bktr_mem(unit, VBI_DATA_SIZE);
515 bktr->vbibuffer = get_bktr_mem(unit, VBI_BUFFER_SIZE);
516
517 /* allocate space for pixel buffer */
518 if ( BROOKTREE_ALLOC )
519 buf = get_bktr_mem(unit, BROOKTREE_ALLOC);
520 else
521 buf = 0;
522 }
523 #endif /* FreeBSD or BSDi */
524
525 #ifdef USE_VBIMUTEX
526 mtx_init(&bktr->vbimutex, "bktr vbi lock", NULL, MTX_DEF);
527 #endif
528
529 /* If this is a module, save the current contiguous memory */
530 #if defined(BKTR_FREEBSD_MODULE)
531 bktr_store_address(unit, BKTR_MEM_DMA_PROG, bktr->dma_prog);
532 bktr_store_address(unit, BKTR_MEM_ODD_DMA_PROG, bktr->odd_dma_prog);
533 bktr_store_address(unit, BKTR_MEM_VBIDATA, bktr->vbidata);
534 bktr_store_address(unit, BKTR_MEM_VBIBUFFER, bktr->vbibuffer);
535 bktr_store_address(unit, BKTR_MEM_BUF, buf);
536 #endif
537
538
539 if ( bootverbose ) {
540 printf("%s: buffer size %d, addr %p\n",
541 bktr_name(bktr), BROOKTREE_ALLOC,
542 (void *)(uintptr_t)vtophys(buf));
543 }
544
545 if ( buf != 0 ) {
546 bktr->bigbuf = buf;
547 bktr->alloc_pages = BROOKTREE_ALLOC_PAGES;
548 bzero((caddr_t) bktr->bigbuf, BROOKTREE_ALLOC);
549 } else {
550 bktr->alloc_pages = 0;
551 }
552
553
554 bktr->flags = METEOR_INITALIZED | METEOR_AUTOMODE |
555 METEOR_DEV0 | METEOR_RGB16;
556 bktr->dma_prog_loaded = FALSE;
557 bktr->cols = 640;
558 bktr->rows = 480;
559 bktr->frames = 1; /* one frame */
560 bktr->format = METEOR_GEO_RGB16;
561 bktr->pixfmt = oformat_meteor_to_bt( bktr->format );
562 bktr->pixfmt_compat = TRUE;
563
564
565 bktr->vbiinsert = 0;
566 bktr->vbistart = 0;
567 bktr->vbisize = 0;
568 bktr->vbiflags = 0;
569
570
571 /* using the pci device id and revision id */
572 /* and determine the card type */
573 if (PCI_VENDOR(pci_id) == PCI_VENDOR_BROOKTREE)
574 {
575 switch (PCI_PRODUCT(pci_id)) {
576 case PCI_PRODUCT_BROOKTREE_BT848:
577 if (rev == 0x12)
578 bktr->id = BROOKTREE_848A;
579 else
580 bktr->id = BROOKTREE_848;
581 break;
582 case PCI_PRODUCT_BROOKTREE_BT849:
583 bktr->id = BROOKTREE_849A;
584 break;
585 case PCI_PRODUCT_BROOKTREE_BT878:
586 bktr->id = BROOKTREE_878;
587 break;
588 case PCI_PRODUCT_BROOKTREE_BT879:
589 bktr->id = BROOKTREE_879;
590 break;
591 }
592 };
593
594 bktr->clr_on_start = FALSE;
595
596 /* defaults for the tuner section of the card */
597 bktr->tflags = TUNER_INITALIZED;
598 bktr->tuner.frequency = 0;
599 bktr->tuner.channel = 0;
600 bktr->tuner.chnlset = DEFAULT_CHNLSET;
601 bktr->tuner.afc = 0;
602 bktr->tuner.radio_mode = 0;
603 bktr->audio_mux_select = 0;
604 bktr->audio_mute_state = FALSE;
605 bktr->bt848_card = -1;
606 bktr->bt848_tuner = -1;
607 bktr->reverse_mute = -1;
608 bktr->slow_msp_audio = 0;
609 bktr->msp_use_mono_source = 0;
610 bktr->msp_source_selected = -1;
611 bktr->audio_mux_present = 1;
612
613 #if defined(__FreeBSD__)
614 #ifdef BKTR_NEW_MSP34XX_DRIVER
615 /* get hint on short programming of the msp34xx, so we know */
616 /* if the decision what thread to start should be overwritten */
617 if ( (err = resource_int_value("bktr", unit, "mspsimple",
618 &(bktr->mspsimple)) ) != 0 )
619 bktr->mspsimple = -1; /* fall back to default */
620 #endif
621 #endif
622
623 probeCard( bktr, TRUE, unit );
624
625 /* Initialise any MSP34xx or TDA98xx audio chips */
626 init_audio_devices( bktr );
627
628 #ifdef BKTR_NEW_MSP34XX_DRIVER
629 /* setup the kenrel thread */
630 err = msp_attach( bktr );
631 if ( err != 0 ) /* error doing kernel thread stuff, disable msp3400c */
632 bktr->card.msp3400c = 0;
633 #endif
634
635
636 }
637
638
639 /* Copy the vbi lines from 'vbidata' into the circular buffer, 'vbibuffer'.
640 * The circular buffer holds 'n' fixed size data blocks.
641 * vbisize is the number of bytes in the circular buffer
642 * vbiread is the point we reading data out of the circular buffer
643 * vbiinsert is the point we insert data into the circular buffer
644 */
645 static void vbidecode(bktr_ptr_t bktr) {
646 unsigned char *dest;
647 unsigned int *seq_dest;
648
649 /* Check if there is room in the buffer to insert the data. */
650 if (bktr->vbisize + VBI_DATA_SIZE > VBI_BUFFER_SIZE) return;
651
652 /* Copy the VBI data into the next free slot in the buffer. */
653 /* 'dest' is the point in vbibuffer where we want to insert new data */
654 dest = (unsigned char *)bktr->vbibuffer + bktr->vbiinsert;
655 memcpy(dest, (unsigned char*)bktr->vbidata, VBI_DATA_SIZE);
656
657 /* Write the VBI sequence number to the end of the vbi data */
658 /* This is used by the AleVT teletext program */
659 seq_dest = (unsigned int *)((unsigned char *)bktr->vbibuffer
660 + bktr->vbiinsert
661 + (VBI_DATA_SIZE - sizeof(bktr->vbi_sequence_number)));
662 *seq_dest = bktr->vbi_sequence_number;
663
664 /* And increase the VBI sequence number */
665 /* This can wrap around */
666 bktr->vbi_sequence_number++;
667
668
669 /* Increment the vbiinsert pointer */
670 /* This can wrap around */
671 bktr->vbiinsert += VBI_DATA_SIZE;
672 bktr->vbiinsert = (bktr->vbiinsert % VBI_BUFFER_SIZE);
673
674 /* And increase the amount of vbi data in the buffer */
675 bktr->vbisize = bktr->vbisize + VBI_DATA_SIZE;
676
677 }
678
679
680 /*
681 * the common interrupt handler.
682 * Returns a 0 or 1 depending on whether the interrupt has handled.
683 * In the OS specific section, bktr_intr() is defined which calls this
684 * common interrupt handler.
685 */
686 int
687 common_bktr_intr( void *arg )
688 {
689 bktr_ptr_t bktr;
690 u_long bktr_status;
691 u_char dstatus;
692 u_long field;
693 u_long w_field;
694 u_long req_field;
695
696 bktr = (bktr_ptr_t) arg;
697
698 /*
699 * check to see if any interrupts are unmasked on this device. If
700 * none are, then we likely got here by way of being on a PCI shared
701 * interrupt dispatch list.
702 */
703 if (INL(bktr, BKTR_INT_MASK) == ALL_INTS_DISABLED)
704 return 0; /* bail out now, before we do something we
705 shouldn't */
706
707 if (!(bktr->flags & METEOR_OPEN)) {
708 OUTW(bktr, BKTR_GPIO_DMA_CTL, FIFO_RISC_DISABLED);
709 OUTL(bktr, BKTR_INT_MASK, ALL_INTS_DISABLED);
710 /* return; ?? */
711 }
712
713 /* record and clear the INTerrupt status bits */
714 bktr_status = INL(bktr, BKTR_INT_STAT);
715 OUTL(bktr, BKTR_INT_STAT, bktr_status & ~I2C_BITS); /* don't touch i2c */
716
717 /* record and clear the device status register */
718 dstatus = INB(bktr, BKTR_DSTATUS);
719 OUTB(bktr, BKTR_DSTATUS, 0x00);
720
721 #if defined( STATUS_SUM )
722 /* add any new device status or INTerrupt status bits */
723 status_sum |= (bktr_status & ~(BT848_INT_RSV0|BT848_INT_RSV1));
724 status_sum |= ((dstatus & (BT848_DSTATUS_COF|BT848_DSTATUS_LOF)) << 6);
725 #endif /* STATUS_SUM */
726 /* printf( "%s: STATUS %x %x %x \n", bktr_name(bktr),
727 dstatus, bktr_status, INL(bktr, BKTR_RISC_COUNT) );
728 */
729
730
731 /* if risc was disabled re-start process again */
732 /* if there was one of the following errors re-start again */
733 if ( !(bktr_status & BT848_INT_RISC_EN) ||
734 ((bktr_status &(/* BT848_INT_FBUS | */
735 /* BT848_INT_FTRGT | */
736 /* BT848_INT_FDSR | */
737 BT848_INT_PPERR |
738 BT848_INT_RIPERR | BT848_INT_PABORT |
739 BT848_INT_OCERR | BT848_INT_SCERR) ) != 0)
740 || ((INB(bktr, BKTR_TDEC) == 0) && (bktr_status & TDEC_BITS)) ) {
741
742 u_short tdec_save = INB(bktr, BKTR_TDEC);
743
744 OUTW(bktr, BKTR_GPIO_DMA_CTL, FIFO_RISC_DISABLED);
745 OUTB(bktr, BKTR_CAP_CTL, CAPTURE_OFF);
746
747 OUTL(bktr, BKTR_INT_MASK, ALL_INTS_DISABLED);
748
749 /* Reset temporal decimation counter */
750 OUTB(bktr, BKTR_TDEC, 0);
751 OUTB(bktr, BKTR_TDEC, tdec_save);
752
753 /* Reset to no-fields captured state */
754 if (bktr->flags & (METEOR_CONTIN | METEOR_SYNCAP)) {
755 switch(bktr->flags & METEOR_ONLY_FIELDS_MASK) {
756 case METEOR_ONLY_ODD_FIELDS:
757 bktr->flags |= METEOR_WANT_ODD;
758 break;
759 case METEOR_ONLY_EVEN_FIELDS:
760 bktr->flags |= METEOR_WANT_EVEN;
761 break;
762 default:
763 bktr->flags |= METEOR_WANT_MASK;
764 break;
765 }
766 }
767
768 OUTL(bktr, BKTR_RISC_STRT_ADD, vtophys(bktr->dma_prog));
769 OUTW(bktr, BKTR_GPIO_DMA_CTL, FIFO_ENABLED);
770 OUTW(bktr, BKTR_GPIO_DMA_CTL, bktr->capcontrol);
771
772 OUTL(bktr, BKTR_INT_MASK, BT848_INT_MYSTERYBIT |
773 BT848_INT_RISCI |
774 BT848_INT_VSYNC |
775 BT848_INT_FMTCHG);
776
777 OUTB(bktr, BKTR_CAP_CTL, bktr->bktr_cap_ctl);
778 return 1;
779 }
780
781 /* If this is not a RISC program interrupt, return */
782 if (!(bktr_status & BT848_INT_RISCI))
783 return 0;
784
785 /**
786 printf( "%s: intr status %x %x %x\n", bktr_name(bktr),
787 bktr_status, dstatus, INL(bktr, BKTR_RISC_COUNT) );
788 */
789
790
791 /*
792 * Disable future interrupts if a capture mode is not selected.
793 * This can happen when we are in the process of closing or
794 * changing capture modes, otherwise it shouldn't happen.
795 */
796 if (!(bktr->flags & METEOR_CAP_MASK))
797 OUTB(bktr, BKTR_CAP_CTL, CAPTURE_OFF);
798
799
800 /* Determine which field generated this interrupt */
801 field = ( bktr_status & BT848_INT_FIELD ) ? EVEN_F : ODD_F;
802
803
804 /*
805 * Process the VBI data if it is being captured. We do this once
806 * both Odd and Even VBI data is captured. Therefore we do this
807 * in the Even field interrupt handler.
808 */
809 LOCK_VBI(bktr);
810 if ( (bktr->vbiflags & VBI_CAPTURE)
811 &&(bktr->vbiflags & VBI_OPEN)
812 &&(field==EVEN_F)) {
813 /* Put VBI data into circular buffer */
814 vbidecode(bktr);
815
816 /* If someone is blocked on reading from /dev/vbi, wake them */
817 if (bktr->vbi_read_blocked) {
818 bktr->vbi_read_blocked = FALSE;
819 wakeup(VBI_SLEEP);
820 }
821
822 /* If someone has a select() on /dev/vbi, inform them */
823 if (SEL_WAITING(&bktr->vbi_select)) {
824 selwakeuppri(&bktr->vbi_select, VBIPRI);
825 }
826
827
828 }
829 UNLOCK_VBI(bktr);
830
831 /*
832 * Register the completed field
833 * (For dual-field mode, require fields from the same frame)
834 */
835 switch ( bktr->flags & METEOR_WANT_MASK ) {
836 case METEOR_WANT_ODD : w_field = ODD_F ; break;
837 case METEOR_WANT_EVEN : w_field = EVEN_F ; break;
838 default : w_field = (ODD_F|EVEN_F); break;
839 }
840 switch ( bktr->flags & METEOR_ONLY_FIELDS_MASK ) {
841 case METEOR_ONLY_ODD_FIELDS : req_field = ODD_F ; break;
842 case METEOR_ONLY_EVEN_FIELDS : req_field = EVEN_F ; break;
843 default : req_field = (ODD_F|EVEN_F);
844 break;
845 }
846
847 if (( field == EVEN_F ) && ( w_field == EVEN_F ))
848 bktr->flags &= ~METEOR_WANT_EVEN;
849 else if (( field == ODD_F ) && ( req_field == ODD_F ) &&
850 ( w_field == ODD_F ))
851 bktr->flags &= ~METEOR_WANT_ODD;
852 else if (( field == ODD_F ) && ( req_field == (ODD_F|EVEN_F) ) &&
853 ( w_field == (ODD_F|EVEN_F) ))
854 bktr->flags &= ~METEOR_WANT_ODD;
855 else if (( field == ODD_F ) && ( req_field == (ODD_F|EVEN_F) ) &&
856 ( w_field == ODD_F )) {
857 bktr->flags &= ~METEOR_WANT_ODD;
858 bktr->flags |= METEOR_WANT_EVEN;
859 }
860 else {
861 /* We're out of sync. Start over. */
862 if (bktr->flags & (METEOR_CONTIN | METEOR_SYNCAP)) {
863 switch(bktr->flags & METEOR_ONLY_FIELDS_MASK) {
864 case METEOR_ONLY_ODD_FIELDS:
865 bktr->flags |= METEOR_WANT_ODD;
866 break;
867 case METEOR_ONLY_EVEN_FIELDS:
868 bktr->flags |= METEOR_WANT_EVEN;
869 break;
870 default:
871 bktr->flags |= METEOR_WANT_MASK;
872 break;
873 }
874 }
875 return 1;
876 }
877
878 /*
879 * If we have a complete frame.
880 */
881 if (!(bktr->flags & METEOR_WANT_MASK)) {
882 bktr->frames_captured++;
883 /*
884 * post the completion time.
885 */
886 if (bktr->flags & METEOR_WANT_TS) {
887 struct timeval *ts;
888
889 if ((u_int) bktr->alloc_pages * PAGE_SIZE
890 <= (bktr->frame_size + sizeof(struct timeval))) {
891 ts =(struct timeval *)bktr->bigbuf +
892 bktr->frame_size;
893 /* doesn't work in synch mode except
894 * for first frame */
895 /* XXX */
896 microtime(ts);
897 }
898 }
899
900
901 /*
902 * Wake up the user in single capture mode.
903 */
904 if (bktr->flags & METEOR_SINGLE) {
905
906 /* stop dma */
907 OUTL(bktr, BKTR_INT_MASK, ALL_INTS_DISABLED);
908
909 /* disable risc, leave fifo running */
910 OUTW(bktr, BKTR_GPIO_DMA_CTL, FIFO_ENABLED);
911 wakeup(BKTR_SLEEP);
912 }
913
914 /*
915 * If the user requested to be notified via signal,
916 * let them know the frame is complete.
917 */
918
919 if (bktr->proc != NULL) {
920 PROC_LOCK(bktr->proc);
921 psignal( bktr->proc, bktr->signal);
922 PROC_UNLOCK(bktr->proc);
923 }
924
925 /*
926 * Reset the want flags if in continuous or
927 * synchronous capture mode.
928 */
929 /*
930 * XXX NOTE (Luigi):
931 * currently we only support 3 capture modes: odd only, even only,
932 * odd+even interlaced (odd field first). A fourth mode (non interlaced,
933 * either even OR odd) could provide 60 (50 for PAL) pictures per
934 * second, but it would require this routine to toggle the desired frame
935 * each time, and one more different DMA program for the Bt848.
936 * As a consequence, this fourth mode is currently unsupported.
937 */
938
939 if (bktr->flags & (METEOR_CONTIN | METEOR_SYNCAP)) {
940 switch(bktr->flags & METEOR_ONLY_FIELDS_MASK) {
941 case METEOR_ONLY_ODD_FIELDS:
942 bktr->flags |= METEOR_WANT_ODD;
943 break;
944 case METEOR_ONLY_EVEN_FIELDS:
945 bktr->flags |= METEOR_WANT_EVEN;
946 break;
947 default:
948 bktr->flags |= METEOR_WANT_MASK;
949 break;
950 }
951 }
952 }
953
954 return 1;
955 }
956
957
958
959
960 /*
961 *
962 */
963 extern int bt848_format; /* used to set the default format, PAL or NTSC */
964 int
965 video_open( bktr_ptr_t bktr )
966 {
967 int frame_rate, video_format=0;
968
969 if (bktr->flags & METEOR_OPEN) /* device is busy */
970 return( EBUSY );
971
972 bktr->flags |= METEOR_OPEN;
973
974 #ifdef BT848_DUMP
975 dump_bt848( bt848 );
976 #endif
977
978 bktr->clr_on_start = FALSE;
979
980 OUTB(bktr, BKTR_DSTATUS, 0x00); /* clear device status reg. */
981
982 OUTB(bktr, BKTR_ADC, SYNC_LEVEL);
983
984 #if defined(BKTR_SYSTEM_DEFAULT) && BKTR_SYSTEM_DEFAULT == BROOKTREE_PAL
985 video_format = 0;
986 #else
987 video_format = 1;
988 #endif
989
990 if (bt848_format == 0 )
991 video_format = 0;
992
993 if (bt848_format == 1 )
994 video_format = 1;
995
996 if (video_format == 1 ) {
997 OUTB(bktr, BKTR_IFORM, BT848_IFORM_F_NTSCM);
998 bktr->format_params = BT848_IFORM_F_NTSCM;
999
1000 } else {
1001 OUTB(bktr, BKTR_IFORM, BT848_IFORM_F_PALBDGHI);
1002 bktr->format_params = BT848_IFORM_F_PALBDGHI;
1003
1004 }
1005
1006 OUTB(bktr, BKTR_IFORM, INB(bktr, BKTR_IFORM) | format_params[bktr->format_params].iform_xtsel);
1007
1008 /* work around for new Hauppauge 878 cards */
1009 if ((bktr->card.card_id == CARD_HAUPPAUGE) &&
1010 (bktr->id==BROOKTREE_878 || bktr->id==BROOKTREE_879) )
1011 OUTB(bktr, BKTR_IFORM, INB(bktr, BKTR_IFORM) | BT848_IFORM_M_MUX3);
1012 else
1013 OUTB(bktr, BKTR_IFORM, INB(bktr, BKTR_IFORM) | BT848_IFORM_M_MUX1);
1014
1015 OUTB(bktr, BKTR_ADELAY, format_params[bktr->format_params].adelay);
1016 OUTB(bktr, BKTR_BDELAY, format_params[bktr->format_params].bdelay);
1017 frame_rate = format_params[bktr->format_params].frame_rate;
1018
1019 /* enable PLL mode using 28Mhz crystal for PAL/SECAM users */
1020 if (bktr->xtal_pll_mode == BT848_USE_PLL) {
1021 OUTB(bktr, BKTR_TGCTRL, 0);
1022 OUTB(bktr, BKTR_PLL_F_LO, 0xf9);
1023 OUTB(bktr, BKTR_PLL_F_HI, 0xdc);
1024 OUTB(bktr, BKTR_PLL_F_XCI, 0x8e);
1025 }
1026
1027 bktr->flags = (bktr->flags & ~METEOR_DEV_MASK) | METEOR_DEV0;
1028
1029 bktr->max_clip_node = 0;
1030
1031 OUTB(bktr, BKTR_COLOR_CTL, BT848_COLOR_CTL_GAMMA | BT848_COLOR_CTL_RGB_DED);
1032
1033 OUTB(bktr, BKTR_E_HSCALE_LO, 170);
1034 OUTB(bktr, BKTR_O_HSCALE_LO, 170);
1035
1036 OUTB(bktr, BKTR_E_DELAY_LO, 0x72);
1037 OUTB(bktr, BKTR_O_DELAY_LO, 0x72);
1038 OUTB(bktr, BKTR_E_SCLOOP, 0);
1039 OUTB(bktr, BKTR_O_SCLOOP, 0);
1040
1041 OUTB(bktr, BKTR_VBI_PACK_SIZE, 0);
1042 OUTB(bktr, BKTR_VBI_PACK_DEL, 0);
1043
1044 bktr->fifo_errors = 0;
1045 bktr->dma_errors = 0;
1046 bktr->frames_captured = 0;
1047 bktr->even_fields_captured = 0;
1048 bktr->odd_fields_captured = 0;
1049 bktr->proc = NULL;
1050 set_fps(bktr, frame_rate);
1051 bktr->video.addr = 0;
1052 bktr->video.width = 0;
1053 bktr->video.banksize = 0;
1054 bktr->video.ramsize = 0;
1055 bktr->pixfmt_compat = TRUE;
1056 bktr->format = METEOR_GEO_RGB16;
1057 bktr->pixfmt = oformat_meteor_to_bt( bktr->format );
1058
1059 bktr->capture_area_enabled = FALSE;
1060
1061 OUTL(bktr, BKTR_INT_MASK, BT848_INT_MYSTERYBIT); /* if you take this out triton
1062 based motherboards will
1063 operate unreliably */
1064 return( 0 );
1065 }
1066
1067 int
1068 vbi_open( bktr_ptr_t bktr )
1069 {
1070
1071 LOCK_VBI(bktr);
1072
1073 if (bktr->vbiflags & VBI_OPEN) { /* device is busy */
1074 UNLOCK_VBI(bktr);
1075 return( EBUSY );
1076 }
1077
1078 bktr->vbiflags |= VBI_OPEN;
1079
1080 /* reset the VBI circular buffer pointers and clear the buffers */
1081 bktr->vbiinsert = 0;
1082 bktr->vbistart = 0;
1083 bktr->vbisize = 0;
1084 bktr->vbi_sequence_number = 0;
1085 bktr->vbi_read_blocked = FALSE;
1086
1087 bzero((caddr_t) bktr->vbibuffer, VBI_BUFFER_SIZE);
1088 bzero((caddr_t) bktr->vbidata, VBI_DATA_SIZE);
1089
1090 UNLOCK_VBI(bktr);
1091
1092 return( 0 );
1093 }
1094
1095 /*
1096 *
1097 */
1098 int
1099 tuner_open( bktr_ptr_t bktr )
1100 {
1101 if ( !(bktr->tflags & TUNER_INITALIZED) ) /* device not found */
1102 return( ENXIO );
1103
1104 if ( bktr->tflags & TUNER_OPEN ) /* already open */
1105 return( 0 );
1106
1107 bktr->tflags |= TUNER_OPEN;
1108 bktr->tuner.frequency = 0;
1109 bktr->tuner.channel = 0;
1110 bktr->tuner.chnlset = DEFAULT_CHNLSET;
1111 bktr->tuner.afc = 0;
1112 bktr->tuner.radio_mode = 0;
1113
1114 /* enable drivers on the GPIO port that control the MUXes */
1115 OUTL(bktr, BKTR_GPIO_OUT_EN, INL(bktr, BKTR_GPIO_OUT_EN) | bktr->card.gpio_mux_bits);
1116
1117 /* unmute the audio stream */
1118 set_audio( bktr, AUDIO_UNMUTE );
1119
1120 /* Initialise any audio chips, eg MSP34xx or TDA98xx */
1121 init_audio_devices( bktr );
1122
1123 return( 0 );
1124 }
1125
1126
1127
1128
1129 /*
1130 *
1131 */
1132 int
1133 video_close( bktr_ptr_t bktr )
1134 {
1135 bktr->flags &= ~(METEOR_OPEN |
1136 METEOR_SINGLE |
1137 METEOR_CAP_MASK |
1138 METEOR_WANT_MASK);
1139
1140 OUTW(bktr, BKTR_GPIO_DMA_CTL, FIFO_RISC_DISABLED);
1141 OUTB(bktr, BKTR_CAP_CTL, CAPTURE_OFF);
1142
1143 bktr->dma_prog_loaded = FALSE;
1144 OUTB(bktr, BKTR_TDEC, 0);
1145 OUTL(bktr, BKTR_INT_MASK, ALL_INTS_DISABLED);
1146
1147 /** FIXME: is 0xf magic, wouldn't 0x00 work ??? */
1148 OUTL(bktr, BKTR_SRESET, 0xf);
1149 OUTL(bktr, BKTR_INT_STAT, ALL_INTS_CLEARED);
1150
1151 return( 0 );
1152 }
1153
1154
1155 /*
1156 * tuner close handle,
1157 * place holder for tuner specific operations on a close.
1158 */
1159 int
1160 tuner_close( bktr_ptr_t bktr )
1161 {
1162 bktr->tflags &= ~TUNER_OPEN;
1163
1164 /* mute the audio by switching the mux */
1165 set_audio( bktr, AUDIO_MUTE );
1166
1167 /* disable drivers on the GPIO port that control the MUXes */
1168 OUTL(bktr, BKTR_GPIO_OUT_EN, INL(bktr, BKTR_GPIO_OUT_EN) & ~bktr->card.gpio_mux_bits);
1169
1170 return( 0 );
1171 }
1172
1173 int
1174 vbi_close( bktr_ptr_t bktr )
1175 {
1176
1177 LOCK_VBI(bktr);
1178
1179 bktr->vbiflags &= ~VBI_OPEN;
1180
1181 UNLOCK_VBI(bktr);
1182
1183 return( 0 );
1184 }
1185
1186 /*
1187 *
1188 */
1189 int
1190 video_read(bktr_ptr_t bktr, int unit, struct cdev *dev, struct uio *uio)
1191 {
1192 int status;
1193 int count;
1194
1195
1196 if (bktr->bigbuf == 0) /* no frame buffer allocated (ioctl failed) */
1197 return( ENOMEM );
1198
1199 if (bktr->flags & METEOR_CAP_MASK)
1200 return( EIO ); /* already capturing */
1201
1202 OUTB(bktr, BKTR_CAP_CTL, bktr->bktr_cap_ctl);
1203
1204
1205 count = bktr->rows * bktr->cols *
1206 pixfmt_table[ bktr->pixfmt ].public.Bpp;
1207
1208 if ((int) uio->uio_iov->iov_len < count)
1209 return( EINVAL );
1210
1211 bktr->flags &= ~(METEOR_CAP_MASK | METEOR_WANT_MASK);
1212
1213 /* capture one frame */
1214 start_capture(bktr, METEOR_SINGLE);
1215 /* wait for capture to complete */
1216 OUTL(bktr, BKTR_INT_STAT, ALL_INTS_CLEARED);
1217 OUTW(bktr, BKTR_GPIO_DMA_CTL, FIFO_ENABLED);
1218 OUTW(bktr, BKTR_GPIO_DMA_CTL, bktr->capcontrol);
1219 OUTL(bktr, BKTR_INT_MASK, BT848_INT_MYSTERYBIT |
1220 BT848_INT_RISCI |
1221 BT848_INT_VSYNC |
1222 BT848_INT_FMTCHG);
1223
1224
1225 status = tsleep(BKTR_SLEEP, BKTRPRI, "captur", 0);
1226 if (!status) /* successful capture */
1227 status = uiomove((caddr_t)bktr->bigbuf, count, uio);
1228 else
1229 printf ("%s: read: tsleep error %d\n",
1230 bktr_name(bktr), status);
1231
1232 bktr->flags &= ~(METEOR_SINGLE | METEOR_WANT_MASK);
1233
1234 return( status );
1235 }
1236
1237 /*
1238 * Read VBI data from the vbi circular buffer
1239 * The buffer holds vbi data blocks which are the same size
1240 * vbiinsert is the position we will insert the next item into the buffer
1241 * vbistart is the actual position in the buffer we want to read from
1242 * vbisize is the exact number of bytes in the buffer left to read
1243 */
1244 int
1245 vbi_read(bktr_ptr_t bktr, struct uio *uio, int ioflag)
1246 {
1247 int readsize, readsize2, start;
1248 int status;
1249
1250 /*
1251 * XXX - vbi_read() should be protected against being re-entered
1252 * while it is unlocked for the uiomove.
1253 */
1254 LOCK_VBI(bktr);
1255
1256 while(bktr->vbisize == 0) {
1257 if (ioflag & FNDELAY) {
1258 status = EWOULDBLOCK;
1259 goto out;
1260 }
1261
1262 bktr->vbi_read_blocked = TRUE;
1263 #ifdef USE_VBIMUTEX
1264 if ((status = msleep(VBI_SLEEP, &bktr->vbimutex, VBIPRI, "vbi",
1265 0))) {
1266 goto out;
1267 }
1268 #else
1269 if ((status = tsleep(VBI_SLEEP, VBIPRI, "vbi", 0))) {
1270 goto out;
1271 }
1272 #endif
1273 }
1274
1275 /* Now we have some data to give to the user */
1276
1277 /* We cannot read more bytes than there are in
1278 * the circular buffer
1279 */
1280 readsize = (int)uio->uio_iov->iov_len;
1281
1282 if (readsize > bktr->vbisize) readsize = bktr->vbisize;
1283
1284 /* Check if we can read this number of bytes without having
1285 * to wrap around the circular buffer */
1286 if((bktr->vbistart + readsize) >= VBI_BUFFER_SIZE) {
1287 /* We need to wrap around */
1288
1289 readsize2 = VBI_BUFFER_SIZE - bktr->vbistart;
1290 start = bktr->vbistart;
1291 UNLOCK_VBI(bktr);
1292 status = uiomove((caddr_t)bktr->vbibuffer + start, readsize2, uio);
1293 if (status == 0)
1294 status = uiomove((caddr_t)bktr->vbibuffer, (readsize - readsize2), uio);
1295 } else {
1296 UNLOCK_VBI(bktr);
1297 /* We do not need to wrap around */
1298 status = uiomove((caddr_t)bktr->vbibuffer + bktr->vbistart, readsize, uio);
1299 }
1300
1301 LOCK_VBI(bktr);
1302
1303 /* Update the number of bytes left to read */
1304 bktr->vbisize -= readsize;
1305
1306 /* Update vbistart */
1307 bktr->vbistart += readsize;
1308 bktr->vbistart = bktr->vbistart % VBI_BUFFER_SIZE; /* wrap around if needed */
1309
1310 out:
1311 UNLOCK_VBI(bktr);
1312
1313 return( status );
1314
1315 }
1316
1317
1318
1319 /*
1320 * video ioctls
1321 */
1322 int
1323 video_ioctl( bktr_ptr_t bktr, int unit, ioctl_cmd_t cmd, caddr_t arg, struct thread* td )
1324 {
1325 volatile u_char c_temp;
1326 unsigned int temp;
1327 unsigned int temp_iform;
1328 unsigned int error;
1329 struct meteor_geomet *geo;
1330 struct meteor_counts *counts;
1331 struct meteor_video *video;
1332 struct bktr_capture_area *cap_area;
1333 vm_offset_t buf;
1334 int i;
1335 int sig;
1336 char char_temp;
1337
1338 switch ( cmd ) {
1339
1340 case BT848SCLIP: /* set clip region */
1341 bktr->max_clip_node = 0;
1342 memcpy(&bktr->clip_list, arg, sizeof(bktr->clip_list));
1343
1344 for (i = 0; i < BT848_MAX_CLIP_NODE; i++) {
1345 if (bktr->clip_list[i].y_min == 0 &&
1346 bktr->clip_list[i].y_max == 0)
1347 break;
1348 }
1349 bktr->max_clip_node = i;
1350
1351 /* make sure that the list contains a valid clip secquence */
1352 /* the clip rectangles should be sorted by x then by y as the
1353 second order sort key */
1354
1355 /* clip rectangle list is terminated by y_min and y_max set to 0 */
1356
1357 /* to disable clipping set y_min and y_max to 0 in the first
1358 clip rectangle . The first clip rectangle is clip_list[0].
1359 */
1360
1361
1362
1363 if (bktr->max_clip_node == 0 &&
1364 (bktr->clip_list[0].y_min != 0 &&
1365 bktr->clip_list[0].y_max != 0)) {
1366 return EINVAL;
1367 }
1368
1369 for (i = 0; i < BT848_MAX_CLIP_NODE - 1 ; i++) {
1370 if (bktr->clip_list[i].y_min == 0 &&
1371 bktr->clip_list[i].y_max == 0) {
1372 break;
1373 }
1374 if ( bktr->clip_list[i+1].y_min != 0 &&
1375 bktr->clip_list[i+1].y_max != 0 &&
1376 bktr->clip_list[i].x_min > bktr->clip_list[i+1].x_min ) {
1377
1378 bktr->max_clip_node = 0;
1379 return (EINVAL);
1380
1381 }
1382
1383 if (bktr->clip_list[i].x_min >= bktr->clip_list[i].x_max ||
1384 bktr->clip_list[i].y_min >= bktr->clip_list[i].y_max ||
1385 bktr->clip_list[i].x_min < 0 ||
1386 bktr->clip_list[i].x_max < 0 ||
1387 bktr->clip_list[i].y_min < 0 ||
1388 bktr->clip_list[i].y_max < 0 ) {
1389 bktr->max_clip_node = 0;
1390 return (EINVAL);
1391 }
1392 }
1393
1394 bktr->dma_prog_loaded = FALSE;
1395
1396 break;
1397
1398 case METEORSTATUS: /* get Bt848 status */
1399 c_temp = INB(bktr, BKTR_DSTATUS);
1400 temp = 0;
1401 if (!(c_temp & 0x40)) temp |= METEOR_STATUS_HCLK;
1402 if (!(c_temp & 0x10)) temp |= METEOR_STATUS_FIDT;
1403 *(u_short *)arg = temp;
1404 break;
1405
1406 case BT848SFMT: /* set input format */
1407 temp = *(unsigned long*)arg & BT848_IFORM_FORMAT;
1408 temp_iform = INB(bktr, BKTR_IFORM);
1409 temp_iform &= ~BT848_IFORM_FORMAT;
1410 temp_iform &= ~BT848_IFORM_XTSEL;
1411 OUTB(bktr, BKTR_IFORM, (temp_iform | temp | format_params[temp].iform_xtsel));
1412 switch( temp ) {
1413 case BT848_IFORM_F_AUTO:
1414 bktr->flags = (bktr->flags & ~METEOR_FORM_MASK) |
1415 METEOR_AUTOMODE;
1416 break;
1417
1418 case BT848_IFORM_F_NTSCM:
1419 case BT848_IFORM_F_NTSCJ:
1420 bktr->flags = (bktr->flags & ~METEOR_FORM_MASK) |
1421 METEOR_NTSC;
1422 OUTB(bktr, BKTR_ADELAY, format_params[temp].adelay);
1423 OUTB(bktr, BKTR_BDELAY, format_params[temp].bdelay);
1424 bktr->format_params = temp;
1425 break;
1426
1427 case BT848_IFORM_F_PALBDGHI:
1428 case BT848_IFORM_F_PALN:
1429 case BT848_IFORM_F_SECAM:
1430 case BT848_IFORM_F_RSVD:
1431 case BT848_IFORM_F_PALM:
1432 bktr->flags = (bktr->flags & ~METEOR_FORM_MASK) |
1433 METEOR_PAL;
1434 OUTB(bktr, BKTR_ADELAY, format_params[temp].adelay);
1435 OUTB(bktr, BKTR_BDELAY, format_params[temp].bdelay);
1436 bktr->format_params = temp;
1437 break;
1438
1439 }
1440 bktr->dma_prog_loaded = FALSE;
1441 break;
1442
1443 case METEORSFMT: /* set input format */
1444 temp_iform = INB(bktr, BKTR_IFORM);
1445 temp_iform &= ~BT848_IFORM_FORMAT;
1446 temp_iform &= ~BT848_IFORM_XTSEL;
1447 switch(*(unsigned long *)arg & METEOR_FORM_MASK ) {
1448 case 0: /* default */
1449 case METEOR_FMT_NTSC:
1450 bktr->flags = (bktr->flags & ~METEOR_FORM_MASK) |
1451 METEOR_NTSC;
1452 OUTB(bktr, BKTR_IFORM, temp_iform | BT848_IFORM_F_NTSCM |
1453 format_params[BT848_IFORM_F_NTSCM].iform_xtsel);
1454 OUTB(bktr, BKTR_ADELAY, format_params[BT848_IFORM_F_NTSCM].adelay);
1455 OUTB(bktr, BKTR_BDELAY, format_params[BT848_IFORM_F_NTSCM].bdelay);
1456 bktr->format_params = BT848_IFORM_F_NTSCM;
1457 break;
1458
1459 case METEOR_FMT_PAL:
1460 bktr->flags = (bktr->flags & ~METEOR_FORM_MASK) |
1461 METEOR_PAL;
1462 OUTB(bktr, BKTR_IFORM, temp_iform | BT848_IFORM_F_PALBDGHI |
1463 format_params[BT848_IFORM_F_PALBDGHI].iform_xtsel);
1464 OUTB(bktr, BKTR_ADELAY, format_params[BT848_IFORM_F_PALBDGHI].adelay);
1465 OUTB(bktr, BKTR_BDELAY, format_params[BT848_IFORM_F_PALBDGHI].bdelay);
1466 bktr->format_params = BT848_IFORM_F_PALBDGHI;
1467 break;
1468
1469 case METEOR_FMT_AUTOMODE:
1470 bktr->flags = (bktr->flags & ~METEOR_FORM_MASK) |
1471 METEOR_AUTOMODE;
1472 OUTB(bktr, BKTR_IFORM, temp_iform | BT848_IFORM_F_AUTO |
1473 format_params[BT848_IFORM_F_AUTO].iform_xtsel);
1474 break;
1475
1476 default:
1477 return( EINVAL );
1478 }
1479 bktr->dma_prog_loaded = FALSE;
1480 break;
1481
1482 case METEORGFMT: /* get input format */
1483 *(u_long *)arg = bktr->flags & METEOR_FORM_MASK;
1484 break;
1485
1486
1487 case BT848GFMT: /* get input format */
1488 *(u_long *)arg = INB(bktr, BKTR_IFORM) & BT848_IFORM_FORMAT;
1489 break;
1490
1491 case METEORSCOUNT: /* (re)set error counts */
1492 counts = (struct meteor_counts *) arg;
1493 bktr->fifo_errors = counts->fifo_errors;
1494 bktr->dma_errors = counts->dma_errors;
1495 bktr->frames_captured = counts->frames_captured;
1496 bktr->even_fields_captured = counts->even_fields_captured;
1497 bktr->odd_fields_captured = counts->odd_fields_captured;
1498 break;
1499
1500 case METEORGCOUNT: /* get error counts */
1501 counts = (struct meteor_counts *) arg;
1502 counts->fifo_errors = bktr->fifo_errors;
1503 counts->dma_errors = bktr->dma_errors;
1504 counts->frames_captured = bktr->frames_captured;
1505 counts->even_fields_captured = bktr->even_fields_captured;
1506 counts->odd_fields_captured = bktr->odd_fields_captured;
1507 break;
1508
1509 case METEORGVIDEO:
1510 video = (struct meteor_video *)arg;
1511 video->addr = bktr->video.addr;
1512 video->width = bktr->video.width;
1513 video->banksize = bktr->video.banksize;
1514 video->ramsize = bktr->video.ramsize;
1515 break;
1516
1517 case METEORSVIDEO:
1518 video = (struct meteor_video *)arg;
1519 bktr->video.addr = video->addr;
1520 bktr->video.width = video->width;
1521 bktr->video.banksize = video->banksize;
1522 bktr->video.ramsize = video->ramsize;
1523 break;
1524
1525 case METEORSFPS:
1526 set_fps(bktr, *(u_short *)arg);
1527 break;
1528
1529 case METEORGFPS:
1530 *(u_short *)arg = bktr->fps;
1531 break;
1532
1533 case METEORSHUE: /* set hue */
1534 OUTB(bktr, BKTR_HUE, (*(u_char *) arg) & 0xff);
1535 break;
1536
1537 case METEORGHUE: /* get hue */
1538 *(u_char *)arg = INB(bktr, BKTR_HUE);
1539 break;
1540
1541 case METEORSBRIG: /* set brightness */
1542 char_temp = ( *(u_char *)arg & 0xff) - 128;
1543 OUTB(bktr, BKTR_BRIGHT, char_temp);
1544
1545 break;
1546
1547 case METEORGBRIG: /* get brightness */
1548 *(u_char *)arg = INB(bktr, BKTR_BRIGHT);
1549 break;
1550
1551 case METEORSCSAT: /* set chroma saturation */
1552 temp = (int)*(u_char *)arg;
1553
1554 OUTB(bktr, BKTR_SAT_U_LO, (temp << 1) & 0xff);
1555 OUTB(bktr, BKTR_SAT_V_LO, (temp << 1) & 0xff);
1556 OUTB(bktr, BKTR_E_CONTROL, INB(bktr, BKTR_E_CONTROL)
1557 & ~(BT848_E_CONTROL_SAT_U_MSB
1558 | BT848_E_CONTROL_SAT_V_MSB));
1559 OUTB(bktr, BKTR_O_CONTROL, INB(bktr, BKTR_O_CONTROL)
1560 & ~(BT848_O_CONTROL_SAT_U_MSB |
1561 BT848_O_CONTROL_SAT_V_MSB));
1562
1563 if ( temp & BIT_SEVEN_HIGH ) {
1564 OUTB(bktr, BKTR_E_CONTROL, INB(bktr, BKTR_E_CONTROL)
1565 | (BT848_E_CONTROL_SAT_U_MSB
1566 | BT848_E_CONTROL_SAT_V_MSB));
1567 OUTB(bktr, BKTR_O_CONTROL, INB(bktr, BKTR_O_CONTROL)
1568 | (BT848_O_CONTROL_SAT_U_MSB
1569 | BT848_O_CONTROL_SAT_V_MSB));
1570 }
1571 break;
1572
1573 case METEORGCSAT: /* get chroma saturation */
1574 temp = (INB(bktr, BKTR_SAT_V_LO) >> 1) & 0xff;
1575 if ( INB(bktr, BKTR_E_CONTROL) & BT848_E_CONTROL_SAT_V_MSB )
1576 temp |= BIT_SEVEN_HIGH;
1577 *(u_char *)arg = (u_char)temp;
1578 break;
1579
1580 case METEORSCONT: /* set contrast */
1581 temp = (int)*(u_char *)arg & 0xff;
1582 temp <<= 1;
1583 OUTB(bktr, BKTR_CONTRAST_LO, temp & 0xff);
1584 OUTB(bktr, BKTR_E_CONTROL, INB(bktr, BKTR_E_CONTROL) & ~BT848_E_CONTROL_CON_MSB);
1585 OUTB(bktr, BKTR_O_CONTROL, INB(bktr, BKTR_O_CONTROL) & ~BT848_O_CONTROL_CON_MSB);
1586 OUTB(bktr, BKTR_E_CONTROL, INB(bktr, BKTR_E_CONTROL) |
1587 (((temp & 0x100) >> 6 ) & BT848_E_CONTROL_CON_MSB));
1588 OUTB(bktr, BKTR_O_CONTROL, INB(bktr, BKTR_O_CONTROL) |
1589 (((temp & 0x100) >> 6 ) & BT848_O_CONTROL_CON_MSB));
1590 break;
1591
1592 case METEORGCONT: /* get contrast */
1593 temp = (int)INB(bktr, BKTR_CONTRAST_LO) & 0xff;
1594 temp |= ((int)INB(bktr, BKTR_O_CONTROL) & 0x04) << 6;
1595 *(u_char *)arg = (u_char)((temp >> 1) & 0xff);
1596 break;
1597
1598 case BT848SCBUF: /* set Clear-Buffer-on-start flag */
1599 bktr->clr_on_start = (*(int *)arg != 0);
1600 break;
1601
1602 case BT848GCBUF: /* get Clear-Buffer-on-start flag */
1603 *(int *)arg = (int) bktr->clr_on_start;
1604 break;
1605
1606 case METEORSSIGNAL:
1607 sig = *(int *)arg;
1608 /* Historically, applications used METEOR_SIG_MODE_MASK
1609 * to reset signal delivery.
1610 */
1611 if (sig == METEOR_SIG_MODE_MASK)
1612 sig = 0;
1613 if (sig < 0 || sig > _SIG_MAXSIG)
1614 return (EINVAL);
1615 bktr->signal = sig;
1616 bktr->proc = sig ? td->td_proc : NULL;
1617 break;
1618
1619 case METEORGSIGNAL:
1620 *(int *)arg = bktr->signal;
1621 break;
1622
1623 case METEORCAPTUR:
1624 temp = bktr->flags;
1625 switch (*(int *) arg) {
1626 case METEOR_CAP_SINGLE:
1627
1628 if (bktr->bigbuf==0) /* no frame buffer allocated */
1629 return( ENOMEM );
1630 /* already capturing */
1631 if (temp & METEOR_CAP_MASK)
1632 return( EIO );
1633
1634
1635
1636 start_capture(bktr, METEOR_SINGLE);
1637
1638 /* wait for capture to complete */
1639 OUTL(bktr, BKTR_INT_STAT, ALL_INTS_CLEARED);
1640 OUTW(bktr, BKTR_GPIO_DMA_CTL, FIFO_ENABLED);
1641 OUTW(bktr, BKTR_GPIO_DMA_CTL, bktr->capcontrol);
1642
1643 OUTL(bktr, BKTR_INT_MASK, BT848_INT_MYSTERYBIT |
1644 BT848_INT_RISCI |
1645 BT848_INT_VSYNC |
1646 BT848_INT_FMTCHG);
1647
1648 OUTB(bktr, BKTR_CAP_CTL, bktr->bktr_cap_ctl);
1649 error = tsleep(BKTR_SLEEP, BKTRPRI, "captur", hz);
1650 if (error && (error != ERESTART)) {
1651 /* Here if we didn't get complete frame */
1652 #ifdef DIAGNOSTIC
1653 printf( "%s: ioctl: tsleep error %d %x\n",
1654 bktr_name(bktr), error,
1655 INL(bktr, BKTR_RISC_COUNT));
1656 #endif
1657
1658 /* stop dma */
1659 OUTL(bktr, BKTR_INT_MASK, ALL_INTS_DISABLED);
1660
1661 /* disable risc, leave fifo running */
1662 OUTW(bktr, BKTR_GPIO_DMA_CTL, FIFO_ENABLED);
1663 }
1664
1665 bktr->flags &= ~(METEOR_SINGLE|METEOR_WANT_MASK);
1666 /* FIXME: should we set bt848->int_stat ??? */
1667 break;
1668
1669 case METEOR_CAP_CONTINOUS:
1670 if (bktr->bigbuf==0) /* no frame buffer allocated */
1671 return( ENOMEM );
1672 /* already capturing */
1673 if (temp & METEOR_CAP_MASK)
1674 return( EIO );
1675
1676
1677 start_capture(bktr, METEOR_CONTIN);
1678
1679 /* Clear the interrypt status register */
1680 OUTL(bktr, BKTR_INT_STAT, INL(bktr, BKTR_INT_STAT));
1681
1682 OUTW(bktr, BKTR_GPIO_DMA_CTL, FIFO_ENABLED);
1683 OUTW(bktr, BKTR_GPIO_DMA_CTL, bktr->capcontrol);
1684 OUTB(bktr, BKTR_CAP_CTL, bktr->bktr_cap_ctl);
1685
1686 OUTL(bktr, BKTR_INT_MASK, BT848_INT_MYSTERYBIT |
1687 BT848_INT_RISCI |
1688 BT848_INT_VSYNC |
1689 BT848_INT_FMTCHG);
1690 #ifdef BT848_DUMP
1691 dump_bt848( bt848 );
1692 #endif
1693 break;
1694
1695 case METEOR_CAP_STOP_CONT:
1696 if (bktr->flags & METEOR_CONTIN) {
1697 /* turn off capture */
1698 OUTW(bktr, BKTR_GPIO_DMA_CTL, FIFO_RISC_DISABLED);
1699 OUTB(bktr, BKTR_CAP_CTL, CAPTURE_OFF);
1700 OUTL(bktr, BKTR_INT_MASK, ALL_INTS_DISABLED);
1701 bktr->flags &=
1702 ~(METEOR_CONTIN | METEOR_WANT_MASK);
1703
1704 }
1705 }
1706 break;
1707
1708 case METEORSETGEO:
1709 /* can't change parameters while capturing */
1710 if (bktr->flags & METEOR_CAP_MASK)
1711 return( EBUSY );
1712
1713
1714 geo = (struct meteor_geomet *) arg;
1715
1716 error = 0;
1717 /* Either even or odd, if even & odd, then these a zero */
1718 if ((geo->oformat & METEOR_GEO_ODD_ONLY) &&
1719 (geo->oformat & METEOR_GEO_EVEN_ONLY)) {
1720 printf( "%s: ioctl: Geometry odd or even only.\n",
1721 bktr_name(bktr));
1722 return( EINVAL );
1723 }
1724
1725 /* set/clear even/odd flags */
1726 if (geo->oformat & METEOR_GEO_ODD_ONLY)
1727 bktr->flags |= METEOR_ONLY_ODD_FIELDS;
1728 else
1729 bktr->flags &= ~METEOR_ONLY_ODD_FIELDS;
1730 if (geo->oformat & METEOR_GEO_EVEN_ONLY)
1731 bktr->flags |= METEOR_ONLY_EVEN_FIELDS;
1732 else
1733 bktr->flags &= ~METEOR_ONLY_EVEN_FIELDS;
1734
1735 if (geo->columns <= 0) {
1736 printf(
1737 "%s: ioctl: %d: columns must be greater than zero.\n",
1738 bktr_name(bktr), geo->columns);
1739 error = EINVAL;
1740 }
1741 else if ((geo->columns & 0x3fe) != geo->columns) {
1742 printf(
1743 "%s: ioctl: %d: columns too large or not even.\n",
1744 bktr_name(bktr), geo->columns);
1745 error = EINVAL;
1746 }
1747
1748 if (geo->rows <= 0) {
1749 printf(
1750 "%s: ioctl: %d: rows must be greater than zero.\n",
1751 bktr_name(bktr), geo->rows);
1752 error = EINVAL;
1753 }
1754 else if (((geo->rows & 0x7fe) != geo->rows) ||
1755 ((geo->oformat & METEOR_GEO_FIELD_MASK) &&
1756 ((geo->rows & 0x3fe) != geo->rows)) ) {
1757 printf(
1758 "%s: ioctl: %d: rows too large or not even.\n",
1759 bktr_name(bktr), geo->rows);
1760 error = EINVAL;
1761 }
1762
1763 if (geo->frames > 32) {
1764 printf("%s: ioctl: too many frames.\n",
1765 bktr_name(bktr));
1766
1767 error = EINVAL;
1768 }
1769
1770 if (error)
1771 return( error );
1772
1773 bktr->dma_prog_loaded = FALSE;
1774 OUTW(bktr, BKTR_GPIO_DMA_CTL, FIFO_RISC_DISABLED);
1775
1776 OUTL(bktr, BKTR_INT_MASK, ALL_INTS_DISABLED);
1777
1778 if ((temp=(geo->rows * geo->columns * geo->frames * 2))) {
1779 if (geo->oformat & METEOR_GEO_RGB24) temp = temp * 2;
1780
1781 /* meteor_mem structure for SYNC Capture */
1782 if (geo->frames > 1) temp += PAGE_SIZE;
1783
1784 temp = btoc(temp);
1785 if ((int) temp > bktr->alloc_pages
1786 && bktr->video.addr == 0) {
1787
1788 /*****************************/
1789 /* *** OS Dependant code *** */
1790 /*****************************/
1791 #if defined(__NetBSD__) || defined(__OpenBSD__)
1792 bus_dmamap_t dmamap;
1793
1794 buf = get_bktr_mem(bktr, &dmamap,
1795 temp * PAGE_SIZE);
1796 if (buf != 0) {
1797 free_bktr_mem(bktr, bktr->dm_mem,
1798 bktr->bigbuf);
1799 bktr->dm_mem = dmamap;
1800
1801 #else
1802 buf = get_bktr_mem(unit, temp*PAGE_SIZE);
1803 if (buf != 0) {
1804 kmem_free(kernel_map, bktr->bigbuf,
1805 (bktr->alloc_pages * PAGE_SIZE));
1806 #endif
1807
1808 bktr->bigbuf = buf;
1809 bktr->alloc_pages = temp;
1810 if (bootverbose)
1811 printf(
1812 "%s: ioctl: Allocating %d bytes\n",
1813 bktr_name(bktr), temp*PAGE_SIZE);
1814 }
1815 else
1816 error = ENOMEM;
1817 }
1818 }
1819
1820 if (error)
1821 return error;
1822
1823 bktr->rows = geo->rows;
1824 bktr->cols = geo->columns;
1825 bktr->frames = geo->frames;
1826
1827 /* Pixel format (if in meteor pixfmt compatibility mode) */
1828 if ( bktr->pixfmt_compat ) {
1829 bktr->format = METEOR_GEO_YUV_422;
1830 switch (geo->oformat & METEOR_GEO_OUTPUT_MASK) {
1831 case 0: /* default */
1832 case METEOR_GEO_RGB16:
1833 bktr->format = METEOR_GEO_RGB16;
1834 break;
1835 case METEOR_GEO_RGB24:
1836 bktr->format = METEOR_GEO_RGB24;
1837 break;
1838 case METEOR_GEO_YUV_422:
1839 bktr->format = METEOR_GEO_YUV_422;
1840 if (geo->oformat & METEOR_GEO_YUV_12)
1841 bktr->format = METEOR_GEO_YUV_12;
1842 break;
1843 case METEOR_GEO_YUV_PACKED:
1844 bktr->format = METEOR_GEO_YUV_PACKED;
1845 break;
1846 }
1847 bktr->pixfmt = oformat_meteor_to_bt( bktr->format );
1848 }
1849
1850 if (bktr->flags & METEOR_CAP_MASK) {
1851
1852 if (bktr->flags & (METEOR_CONTIN|METEOR_SYNCAP)) {
1853 switch(bktr->flags & METEOR_ONLY_FIELDS_MASK) {
1854 case METEOR_ONLY_ODD_FIELDS:
1855 bktr->flags |= METEOR_WANT_ODD;
1856 break;
1857 case METEOR_ONLY_EVEN_FIELDS:
1858 bktr->flags |= METEOR_WANT_EVEN;
1859 break;
1860 default:
1861 bktr->flags |= METEOR_WANT_MASK;
1862 break;
1863 }
1864
1865 start_capture(bktr, METEOR_CONTIN);
1866 OUTL(bktr, BKTR_INT_STAT, INL(bktr, BKTR_INT_STAT));
1867 OUTW(bktr, BKTR_GPIO_DMA_CTL, FIFO_ENABLED);
1868 OUTW(bktr, BKTR_GPIO_DMA_CTL, bktr->capcontrol);
1869 OUTL(bktr, BKTR_INT_MASK, BT848_INT_MYSTERYBIT |
1870 BT848_INT_VSYNC |
1871 BT848_INT_FMTCHG);
1872 }
1873 }
1874 break;
1875 /* end of METEORSETGEO */
1876
1877 /* FIXME. The Capture Area currently has the following restrictions:
1878 GENERAL
1879 y_offset may need to be even in interlaced modes
1880 RGB24 - Interlaced mode
1881 x_size must be greater than or equal to 1.666*METEORSETGEO width (cols)
1882 y_size must be greater than or equal to METEORSETGEO height (rows)
1883 RGB24 - Even Only (or Odd Only) mode
1884 x_size must be greater than or equal to 1.666*METEORSETGEO width (cols)
1885 y_size must be greater than or equal to 2*METEORSETGEO height (rows)
1886 YUV12 - Interlaced mode
1887 x_size must be greater than or equal to METEORSETGEO width (cols)
1888 y_size must be greater than or equal to METEORSETGEO height (rows)
1889 YUV12 - Even Only (or Odd Only) mode
1890 x_size must be greater than or equal to METEORSETGEO width (cols)
1891 y_size must be greater than or equal to 2*METEORSETGEO height (rows)
1892 */
1893
1894 case BT848_SCAPAREA: /* set capture area of each video frame */
1895 /* can't change parameters while capturing */
1896 if (bktr->flags & METEOR_CAP_MASK)
1897 return( EBUSY );
1898
1899 cap_area = (struct bktr_capture_area *) arg;
1900 bktr->capture_area_x_offset = cap_area->x_offset;
1901 bktr->capture_area_y_offset = cap_area->y_offset;
1902 bktr->capture_area_x_size = cap_area->x_size;
1903 bktr->capture_area_y_size = cap_area->y_size;
1904 bktr->capture_area_enabled = TRUE;
1905
1906 bktr->dma_prog_loaded = FALSE;
1907 break;
1908
1909 case BT848_GCAPAREA: /* get capture area of each video frame */
1910 cap_area = (struct bktr_capture_area *) arg;
1911 if (bktr->capture_area_enabled == FALSE) {
1912 cap_area->x_offset = 0;
1913 cap_area->y_offset = 0;
1914 cap_area->x_size = format_params[
1915 bktr->format_params].scaled_hactive;
1916 cap_area->y_size = format_params[
1917 bktr->format_params].vactive;
1918 } else {
1919 cap_area->x_offset = bktr->capture_area_x_offset;
1920 cap_area->y_offset = bktr->capture_area_y_offset;
1921 cap_area->x_size = bktr->capture_area_x_size;
1922 cap_area->y_size = bktr->capture_area_y_size;
1923 }
1924 break;
1925
1926 default:
1927 return common_ioctl( bktr, cmd, arg );
1928 }
1929
1930 return( 0 );
1931 }
1932
1933 /*
1934 * tuner ioctls
1935 */
1936 int
1937 tuner_ioctl( bktr_ptr_t bktr, int unit, ioctl_cmd_t cmd, caddr_t arg, struct thread* td )
1938 {
1939 int tmp_int;
1940 unsigned int temp, temp1;
1941 int offset;
1942 int count;
1943 u_char *buf;
1944 u_long par;
1945 u_char write;
1946 int i2c_addr;
1947 int i2c_port;
1948 u_long data;
1949
1950 switch ( cmd ) {
1951
1952 case REMOTE_GETKEY:
1953 /* Read the last key pressed by the Remote Control */
1954 if (bktr->remote_control == 0) return (EINVAL);
1955 remote_read(bktr, (struct bktr_remote *)arg);
1956 break;
1957
1958 #if defined( TUNER_AFC )
1959 case TVTUNER_SETAFC:
1960 bktr->tuner.afc = (*(int *)arg != 0);
1961 break;
1962
1963 case TVTUNER_GETAFC:
1964 *(int *)arg = bktr->tuner.afc;
1965 /* XXX Perhaps use another bit to indicate AFC success? */
1966 break;
1967 #endif /* TUNER_AFC */
1968
1969 case TVTUNER_SETCHNL:
1970 temp_mute( bktr, TRUE );
1971 temp = tv_channel( bktr, (int)*(unsigned long *)arg );
1972 if ( temp < 0 ) {
1973 temp_mute( bktr, FALSE );
1974 return( EINVAL );
1975 }
1976 *(unsigned long *)arg = temp;
1977
1978 /* after every channel change, we must restart the MSP34xx */
1979 /* audio chip to reselect NICAM STEREO or MONO audio */
1980 if ( bktr->card.msp3400c )
1981 msp_autodetect( bktr );
1982
1983 /* after every channel change, we must restart the DPL35xx */
1984 if ( bktr->card.dpl3518a )
1985 dpl_autodetect( bktr );
1986
1987 temp_mute( bktr, FALSE );
1988 break;
1989
1990 case TVTUNER_GETCHNL:
1991 *(unsigned long *)arg = bktr->tuner.channel;
1992 break;
1993
1994 case TVTUNER_SETTYPE:
1995 temp = *(unsigned long *)arg;
1996 if ( (temp < CHNLSET_MIN) || (temp > CHNLSET_MAX) )
1997 return( EINVAL );
1998 bktr->tuner.chnlset = temp;
1999 break;
2000
2001 case TVTUNER_GETTYPE:
2002 *(unsigned long *)arg = bktr->tuner.chnlset;
2003 break;
2004
2005 case TVTUNER_GETSTATUS:
2006 temp = get_tuner_status( bktr );
2007 *(unsigned long *)arg = temp & 0xff;
2008 break;
2009
2010 case TVTUNER_SETFREQ:
2011 temp_mute( bktr, TRUE );
2012 temp = tv_freq( bktr, (int)*(unsigned long *)arg, TV_FREQUENCY);
2013 temp_mute( bktr, FALSE );
2014 if ( temp < 0 ) {
2015 temp_mute( bktr, FALSE );
2016 return( EINVAL );
2017 }
2018 *(unsigned long *)arg = temp;
2019
2020 /* after every channel change, we must restart the MSP34xx */
2021 /* audio chip to reselect NICAM STEREO or MONO audio */
2022 if ( bktr->card.msp3400c )
2023 msp_autodetect( bktr );
2024
2025 /* after every channel change, we must restart the DPL35xx */
2026 if ( bktr->card.dpl3518a )
2027 dpl_autodetect( bktr );
2028
2029 temp_mute( bktr, FALSE );
2030 break;
2031
2032 case TVTUNER_GETFREQ:
2033 *(unsigned long *)arg = bktr->tuner.frequency;
2034 break;
2035
2036 case TVTUNER_GETCHNLSET:
2037 return tuner_getchnlset((struct bktr_chnlset *)arg);
2038
2039 case BT848_SAUDIO: /* set audio channel */
2040 if ( set_audio( bktr, *(int*)arg ) < 0 )
2041 return( EIO );
2042 break;
2043
2044 /* hue is a 2's compliment number, -90' to +89.3' in 0.7' steps */
2045 case BT848_SHUE: /* set hue */
2046 OUTB(bktr, BKTR_HUE, (u_char)(*(int*)arg & 0xff));
2047 break;
2048
2049 case BT848_GHUE: /* get hue */
2050 *(int*)arg = (signed char)(INB(bktr, BKTR_HUE) & 0xff);
2051 break;
2052
2053 /* brightness is a 2's compliment #, -50 to +%49.6% in 0.39% steps */
2054 case BT848_SBRIG: /* set brightness */
2055 OUTB(bktr, BKTR_BRIGHT, (u_char)(*(int *)arg & 0xff));
2056 break;
2057
2058 case BT848_GBRIG: /* get brightness */
2059 *(int *)arg = (signed char)(INB(bktr, BKTR_BRIGHT) & 0xff);
2060 break;
2061
2062 /* */
2063 case BT848_SCSAT: /* set chroma saturation */
2064 tmp_int = *(int*)arg;
2065
2066 temp = INB(bktr, BKTR_E_CONTROL);
2067 temp1 = INB(bktr, BKTR_O_CONTROL);
2068 if ( tmp_int & BIT_EIGHT_HIGH ) {
2069 temp |= (BT848_E_CONTROL_SAT_U_MSB |
2070 BT848_E_CONTROL_SAT_V_MSB);
2071 temp1 |= (BT848_O_CONTROL_SAT_U_MSB |
2072 BT848_O_CONTROL_SAT_V_MSB);
2073 }
2074 else {
2075 temp &= ~(BT848_E_CONTROL_SAT_U_MSB |
2076 BT848_E_CONTROL_SAT_V_MSB);
2077 temp1 &= ~(BT848_O_CONTROL_SAT_U_MSB |
2078 BT848_O_CONTROL_SAT_V_MSB);
2079 }
2080
2081 OUTB(bktr, BKTR_SAT_U_LO, (u_char)(tmp_int & 0xff));
2082 OUTB(bktr, BKTR_SAT_V_LO, (u_char)(tmp_int & 0xff));
2083 OUTB(bktr, BKTR_E_CONTROL, temp);
2084 OUTB(bktr, BKTR_O_CONTROL, temp1);
2085 break;
2086
2087 case BT848_GCSAT: /* get chroma saturation */
2088 tmp_int = (int)(INB(bktr, BKTR_SAT_V_LO) & 0xff);
2089 if ( INB(bktr, BKTR_E_CONTROL) & BT848_E_CONTROL_SAT_V_MSB )
2090 tmp_int |= BIT_EIGHT_HIGH;
2091 *(int*)arg = tmp_int;
2092 break;
2093
2094 /* */
2095 case BT848_SVSAT: /* set chroma V saturation */
2096 tmp_int = *(int*)arg;
2097
2098 temp = INB(bktr, BKTR_E_CONTROL);
2099 temp1 = INB(bktr, BKTR_O_CONTROL);
2100 if ( tmp_int & BIT_EIGHT_HIGH) {
2101 temp |= BT848_E_CONTROL_SAT_V_MSB;
2102 temp1 |= BT848_O_CONTROL_SAT_V_MSB;
2103 }
2104 else {
2105 temp &= ~BT848_E_CONTROL_SAT_V_MSB;
2106 temp1 &= ~BT848_O_CONTROL_SAT_V_MSB;
2107 }
2108
2109 OUTB(bktr, BKTR_SAT_V_LO, (u_char)(tmp_int & 0xff));
2110 OUTB(bktr, BKTR_E_CONTROL, temp);
2111 OUTB(bktr, BKTR_O_CONTROL, temp1);
2112 break;
2113
2114 case BT848_GVSAT: /* get chroma V saturation */
2115 tmp_int = (int)INB(bktr, BKTR_SAT_V_LO) & 0xff;
2116 if ( INB(bktr, BKTR_E_CONTROL) & BT848_E_CONTROL_SAT_V_MSB )
2117 tmp_int |= BIT_EIGHT_HIGH;
2118 *(int*)arg = tmp_int;
2119 break;
2120
2121 /* */
2122 case BT848_SUSAT: /* set chroma U saturation */
2123 tmp_int = *(int*)arg;
2124
2125 temp = INB(bktr, BKTR_E_CONTROL);
2126 temp1 = INB(bktr, BKTR_O_CONTROL);
2127 if ( tmp_int & BIT_EIGHT_HIGH ) {
2128 temp |= BT848_E_CONTROL_SAT_U_MSB;
2129 temp1 |= BT848_O_CONTROL_SAT_U_MSB;
2130 }
2131 else {
2132 temp &= ~BT848_E_CONTROL_SAT_U_MSB;
2133 temp1 &= ~BT848_O_CONTROL_SAT_U_MSB;
2134 }
2135
2136 OUTB(bktr, BKTR_SAT_U_LO, (u_char)(tmp_int & 0xff));
2137 OUTB(bktr, BKTR_E_CONTROL, temp);
2138 OUTB(bktr, BKTR_O_CONTROL, temp1);
2139 break;
2140
2141 case BT848_GUSAT: /* get chroma U saturation */
2142 tmp_int = (int)INB(bktr, BKTR_SAT_U_LO) & 0xff;
2143 if ( INB(bktr, BKTR_E_CONTROL) & BT848_E_CONTROL_SAT_U_MSB )
2144 tmp_int |= BIT_EIGHT_HIGH;
2145 *(int*)arg = tmp_int;
2146 break;
2147
2148 /* lr 970528 luma notch etc - 3 high bits of e_control/o_control */
2149
2150 case BT848_SLNOTCH: /* set luma notch */
2151 tmp_int = (*(int *)arg & 0x7) << 5 ;
2152 OUTB(bktr, BKTR_E_CONTROL, INB(bktr, BKTR_E_CONTROL) & ~0xe0);
2153 OUTB(bktr, BKTR_O_CONTROL, INB(bktr, BKTR_O_CONTROL) & ~0xe0);
2154 OUTB(bktr, BKTR_E_CONTROL, INB(bktr, BKTR_E_CONTROL) | tmp_int);
2155 OUTB(bktr, BKTR_O_CONTROL, INB(bktr, BKTR_O_CONTROL) | tmp_int);
2156 break;
2157
2158 case BT848_GLNOTCH: /* get luma notch */
2159 *(int *)arg = (int) ( (INB(bktr, BKTR_E_CONTROL) & 0xe0) >> 5) ;
2160 break;
2161
2162
2163 /* */
2164 case BT848_SCONT: /* set contrast */
2165 tmp_int = *(int*)arg;
2166
2167 temp = INB(bktr, BKTR_E_CONTROL);
2168 temp1 = INB(bktr, BKTR_O_CONTROL);
2169 if ( tmp_int & BIT_EIGHT_HIGH ) {
2170 temp |= BT848_E_CONTROL_CON_MSB;
2171 temp1 |= BT848_O_CONTROL_CON_MSB;
2172 }
2173 else {
2174 temp &= ~BT848_E_CONTROL_CON_MSB;
2175 temp1 &= ~BT848_O_CONTROL_CON_MSB;
2176 }
2177
2178 OUTB(bktr, BKTR_CONTRAST_LO, (u_char)(tmp_int & 0xff));
2179 OUTB(bktr, BKTR_E_CONTROL, temp);
2180 OUTB(bktr, BKTR_O_CONTROL, temp1);
2181 break;
2182
2183 case BT848_GCONT: /* get contrast */
2184 tmp_int = (int)INB(bktr, BKTR_CONTRAST_LO) & 0xff;
2185 if ( INB(bktr, BKTR_E_CONTROL) & BT848_E_CONTROL_CON_MSB )
2186 tmp_int |= BIT_EIGHT_HIGH;
2187 *(int*)arg = tmp_int;
2188 break;
2189
2190 /* FIXME: SCBARS and CCBARS require a valid int * */
2191 /* argument to succeed, but its not used; consider */
2192 /* using the arg to store the on/off state so */
2193 /* there's only one ioctl() needed to turn cbars on/off */
2194 case BT848_SCBARS: /* set colorbar output */
2195 OUTB(bktr, BKTR_COLOR_CTL, INB(bktr, BKTR_COLOR_CTL) | BT848_COLOR_CTL_COLOR_BARS);
2196 break;
2197
2198 case BT848_CCBARS: /* clear colorbar output */
2199 OUTB(bktr, BKTR_COLOR_CTL, INB(bktr, BKTR_COLOR_CTL) & ~(BT848_COLOR_CTL_COLOR_BARS));
2200 break;
2201
2202 case BT848_GAUDIO: /* get audio channel */
2203 temp = bktr->audio_mux_select;
2204 if ( bktr->audio_mute_state == TRUE )
2205 temp |= AUDIO_MUTE;
2206 *(int*)arg = temp;
2207 break;
2208
2209 case BT848_SBTSC: /* set audio channel */
2210 if ( set_BTSC( bktr, *(int*)arg ) < 0 )
2211 return( EIO );
2212 break;
2213
2214 case BT848_WEEPROM: /* write eeprom */
2215 offset = (((struct eeProm *)arg)->offset);
2216 count = (((struct eeProm *)arg)->count);
2217 buf = &(((struct eeProm *)arg)->bytes[ 0 ]);
2218 if ( writeEEProm( bktr, offset, count, buf ) < 0 )
2219 return( EIO );
2220 break;
2221
2222 case BT848_REEPROM: /* read eeprom */
2223 offset = (((struct eeProm *)arg)->offset);
2224 count = (((struct eeProm *)arg)->count);
2225 buf = &(((struct eeProm *)arg)->bytes[ 0 ]);
2226 if ( readEEProm( bktr, offset, count, buf ) < 0 )
2227 return( EIO );
2228 break;
2229
2230 case BT848_SIGNATURE:
2231 offset = (((struct eeProm *)arg)->offset);
2232 count = (((struct eeProm *)arg)->count);
2233 buf = &(((struct eeProm *)arg)->bytes[ 0 ]);
2234 if ( signCard( bktr, offset, count, buf ) < 0 )
2235 return( EIO );
2236 break;
2237
2238 /* Ioctl's for direct gpio access */
2239 #ifdef BKTR_GPIO_ACCESS
2240 case BT848_GPIO_GET_EN:
2241 *(int*)arg = INL(bktr, BKTR_GPIO_OUT_EN);
2242 break;
2243
2244 case BT848_GPIO_SET_EN:
2245 OUTL(bktr, BKTR_GPIO_OUT_EN, *(int*)arg);
2246 break;
2247
2248 case BT848_GPIO_GET_DATA:
2249 *(int*)arg = INL(bktr, BKTR_GPIO_DATA);
2250 break;
2251
2252 case BT848_GPIO_SET_DATA:
2253 OUTL(bktr, BKTR_GPIO_DATA, *(int*)arg);
2254 break;
2255 #endif /* BKTR_GPIO_ACCESS */
2256
2257 /* Ioctl's for running the tuner device in radio mode */
2258
2259 case RADIO_GETMODE:
2260 *(unsigned char *)arg = bktr->tuner.radio_mode;
2261 break;
2262
2263 case RADIO_SETMODE:
2264 bktr->tuner.radio_mode = *(unsigned char *)arg;
2265 break;
2266
2267 case RADIO_GETFREQ:
2268 *(unsigned long *)arg = bktr->tuner.frequency;
2269 break;
2270
2271 case RADIO_SETFREQ:
2272 /* The argument to this ioctl is NOT freq*16. It is
2273 ** freq*100.
2274 */
2275
2276 temp=(int)*(unsigned long *)arg;
2277
2278 #ifdef BKTR_RADIO_DEBUG
2279 printf("%s: arg=%d temp=%d\n", bktr_name(bktr),
2280 (int)*(unsigned long *)arg, temp);
2281 #endif
2282
2283 #ifndef BKTR_RADIO_NOFREQCHECK
2284 /* According to the spec. sheet the band: 87.5MHz-108MHz */
2285 /* is supported. */
2286 if(temp<8750 || temp>10800) {
2287 printf("%s: Radio frequency out of range\n", bktr_name(bktr));
2288 return(EINVAL);
2289 }
2290 #endif
2291 temp_mute( bktr, TRUE );
2292 temp = tv_freq( bktr, temp, FM_RADIO_FREQUENCY );
2293 temp_mute( bktr, FALSE );
2294 #ifdef BKTR_RADIO_DEBUG
2295 if(temp)
2296 printf("%s: tv_freq returned: %d\n", bktr_name(bktr), temp);
2297 #endif
2298 if ( temp < 0 )
2299 return( EINVAL );
2300 *(unsigned long *)arg = temp;
2301 break;
2302
2303 /* Luigi's I2CWR ioctl */
2304 case BT848_I2CWR:
2305 par = *(u_long *)arg;
2306 write = (par >> 24) & 0xff ;
2307 i2c_addr = (par >> 16) & 0xff ;
2308 i2c_port = (par >> 8) & 0xff ;
2309 data = (par) & 0xff ;
2310
2311 if (write) {
2312 i2cWrite( bktr, i2c_addr, i2c_port, data);
2313 } else {
2314 data = i2cRead( bktr, i2c_addr);
2315 }
2316 *(u_long *)arg = (par & 0xffffff00) | ( data & 0xff );
2317 break;
2318
2319
2320 #ifdef BT848_MSP_READ
2321 /* I2C ioctls to allow userland access to the MSP chip */
2322 case BT848_MSP_READ:
2323 {
2324 struct bktr_msp_control *msp;
2325 msp = (struct bktr_msp_control *) arg;
2326 msp->data = msp_dpl_read(bktr, bktr->msp_addr,
2327 msp->function, msp->address);
2328 break;
2329 }
2330
2331 case BT848_MSP_WRITE:
2332 {
2333 struct bktr_msp_control *msp;
2334 msp = (struct bktr_msp_control *) arg;
2335 msp_dpl_write(bktr, bktr->msp_addr, msp->function,
2336 msp->address, msp->data );
2337 break;
2338 }
2339
2340 case BT848_MSP_RESET:
2341 msp_dpl_reset(bktr, bktr->msp_addr);
2342 break;
2343 #endif
2344
2345 default:
2346 return common_ioctl( bktr, cmd, arg );
2347 }
2348
2349 return( 0 );
2350 }
2351
2352
2353 /*
2354 * common ioctls
2355 */
2356 static int
2357 common_ioctl( bktr_ptr_t bktr, ioctl_cmd_t cmd, caddr_t arg )
2358 {
2359 int pixfmt;
2360 unsigned int temp;
2361 struct meteor_pixfmt *pf_pub;
2362
2363 switch (cmd) {
2364
2365 case METEORSINPUT: /* set input device */
2366 /*Bt848 has 3 MUX Inputs. Bt848A/849A/878/879 has 4 MUX Inputs*/
2367 /* On the original bt848 boards, */
2368 /* Tuner is MUX0, RCA is MUX1, S-Video is MUX2 */
2369 /* On the Hauppauge bt878 boards, */
2370 /* Tuner is MUX0, RCA is MUX3 */
2371 /* Unfortunatly Meteor driver codes DEV_RCA as DEV_0, so we */
2372 /* stick with this system in our Meteor Emulation */
2373
2374 switch(*(unsigned long *)arg & METEOR_DEV_MASK) {
2375
2376 /* this is the RCA video input */
2377 case 0: /* default */
2378 case METEOR_INPUT_DEV0:
2379 /* METEOR_INPUT_DEV_RCA: */
2380 bktr->flags = (bktr->flags & ~METEOR_DEV_MASK)
2381 | METEOR_DEV0;
2382 OUTB(bktr, BKTR_IFORM, INB(bktr, BKTR_IFORM)
2383 & ~BT848_IFORM_MUXSEL);
2384
2385 /* work around for new Hauppauge 878 cards */
2386 if ((bktr->card.card_id == CARD_HAUPPAUGE) &&
2387 (bktr->id==BROOKTREE_878 ||
2388 bktr->id==BROOKTREE_879) )
2389 OUTB(bktr, BKTR_IFORM, INB(bktr, BKTR_IFORM) | BT848_IFORM_M_MUX3);
2390 else
2391 OUTB(bktr, BKTR_IFORM, INB(bktr, BKTR_IFORM) | BT848_IFORM_M_MUX1);
2392
2393 OUTB(bktr, BKTR_E_CONTROL, INB(bktr, BKTR_E_CONTROL) & ~BT848_E_CONTROL_COMP);
2394 OUTB(bktr, BKTR_O_CONTROL, INB(bktr, BKTR_O_CONTROL) & ~BT848_O_CONTROL_COMP);
2395 set_audio( bktr, AUDIO_EXTERN );
2396 break;
2397
2398 /* this is the tuner input */
2399 case METEOR_INPUT_DEV1:
2400 bktr->flags = (bktr->flags & ~METEOR_DEV_MASK)
2401 | METEOR_DEV1;
2402 OUTB(bktr, BKTR_IFORM, INB(bktr, BKTR_IFORM) & ~BT848_IFORM_MUXSEL);
2403 OUTB(bktr, BKTR_IFORM, INB(bktr, BKTR_IFORM) | BT848_IFORM_M_MUX0);
2404 OUTB(bktr, BKTR_E_CONTROL, INB(bktr, BKTR_E_CONTROL) & ~BT848_E_CONTROL_COMP);
2405 OUTB(bktr, BKTR_O_CONTROL, INB(bktr, BKTR_O_CONTROL) & ~BT848_O_CONTROL_COMP);
2406 set_audio( bktr, AUDIO_TUNER );
2407 break;
2408
2409 /* this is the S-VHS input, but with a composite camera */
2410 case METEOR_INPUT_DEV2:
2411 bktr->flags = (bktr->flags & ~METEOR_DEV_MASK)
2412 | METEOR_DEV2;
2413 OUTB(bktr, BKTR_IFORM, INB(bktr, BKTR_IFORM) & ~BT848_IFORM_MUXSEL);
2414 OUTB(bktr, BKTR_IFORM, INB(bktr, BKTR_IFORM) | BT848_IFORM_M_MUX2);
2415 OUTB(bktr, BKTR_E_CONTROL, INB(bktr, BKTR_E_CONTROL) & ~BT848_E_CONTROL_COMP);
2416 OUTB(bktr, BKTR_O_CONTROL, INB(bktr, BKTR_E_CONTROL) & ~BT848_O_CONTROL_COMP);
2417 set_audio( bktr, AUDIO_EXTERN );
2418 break;
2419
2420 /* this is the S-VHS input */
2421 case METEOR_INPUT_DEV_SVIDEO:
2422 bktr->flags = (bktr->flags & ~METEOR_DEV_MASK)
2423 | METEOR_DEV_SVIDEO;
2424 OUTB(bktr, BKTR_IFORM, INB(bktr, BKTR_IFORM) & ~BT848_IFORM_MUXSEL);
2425 OUTB(bktr, BKTR_IFORM, INB(bktr, BKTR_IFORM) | BT848_IFORM_M_MUX2);
2426 OUTB(bktr, BKTR_E_CONTROL, INB(bktr, BKTR_E_CONTROL) | BT848_E_CONTROL_COMP);
2427 OUTB(bktr, BKTR_O_CONTROL, INB(bktr, BKTR_O_CONTROL) | BT848_O_CONTROL_COMP);
2428 set_audio( bktr, AUDIO_EXTERN );
2429 break;
2430
2431 case METEOR_INPUT_DEV3:
2432 if ((bktr->id == BROOKTREE_848A) ||
2433 (bktr->id == BROOKTREE_849A) ||
2434 (bktr->id == BROOKTREE_878) ||
2435 (bktr->id == BROOKTREE_879) ) {
2436 bktr->flags = (bktr->flags & ~METEOR_DEV_MASK)
2437 | METEOR_DEV3;
2438 OUTB(bktr, BKTR_IFORM, INB(bktr, BKTR_IFORM) & ~BT848_IFORM_MUXSEL);
2439
2440 /* work around for new Hauppauge 878 cards */
2441 if ((bktr->card.card_id == CARD_HAUPPAUGE) &&
2442 (bktr->id==BROOKTREE_878 ||
2443 bktr->id==BROOKTREE_879) )
2444 OUTB(bktr, BKTR_IFORM, INB(bktr, BKTR_IFORM) | BT848_IFORM_M_MUX1);
2445 else
2446 OUTB(bktr, BKTR_IFORM, INB(bktr, BKTR_IFORM) | BT848_IFORM_M_MUX3);
2447
2448 OUTB(bktr, BKTR_E_CONTROL, INB(bktr, BKTR_E_CONTROL) & ~BT848_E_CONTROL_COMP);
2449 OUTB(bktr, BKTR_O_CONTROL, INB(bktr, BKTR_O_CONTROL) & ~BT848_O_CONTROL_COMP);
2450 set_audio( bktr, AUDIO_EXTERN );
2451
2452 break;
2453 }
2454
2455 default:
2456 return( EINVAL );
2457 }
2458 break;
2459
2460 case METEORGINPUT: /* get input device */
2461 *(u_long *)arg = bktr->flags & METEOR_DEV_MASK;
2462 break;
2463
2464 case METEORSACTPIXFMT:
2465 if (( *(int *)arg < 0 ) ||
2466 ( *(int *)arg >= PIXFMT_TABLE_SIZE ))
2467 return( EINVAL );
2468
2469 bktr->pixfmt = *(int *)arg;
2470 OUTB(bktr, BKTR_COLOR_CTL, (INB(bktr, BKTR_COLOR_CTL) & 0xf0)
2471 | pixfmt_swap_flags( bktr->pixfmt ));
2472 bktr->pixfmt_compat = FALSE;
2473 break;
2474
2475 case METEORGACTPIXFMT:
2476 *(int *)arg = bktr->pixfmt;
2477 break;
2478
2479 case METEORGSUPPIXFMT :
2480 pf_pub = (struct meteor_pixfmt *)arg;
2481 pixfmt = pf_pub->index;
2482
2483 if (( pixfmt < 0 ) || ( pixfmt >= PIXFMT_TABLE_SIZE ))
2484 return( EINVAL );
2485
2486 memcpy( pf_pub, &pixfmt_table[ pixfmt ].public,
2487 sizeof( *pf_pub ) );
2488
2489 /* Patch in our format index */
2490 pf_pub->index = pixfmt;
2491 break;
2492
2493 #if defined( STATUS_SUM )
2494 case BT848_GSTATUS: /* reap status */
2495 {
2496 DECLARE_INTR_MASK(s);
2497 DISABLE_INTR(s);
2498 temp = status_sum;
2499 status_sum = 0;
2500 ENABLE_INTR(s);
2501 *(u_int*)arg = temp;
2502 break;
2503 }
2504 #endif /* STATUS_SUM */
2505
2506 default:
2507 return( ENOTTY );
2508 }
2509
2510 return( 0 );
2511 }
2512
2513
2514
2515
2516 /******************************************************************************
2517 * bt848 RISC programming routines:
2518 */
2519
2520
2521 /*
2522 *
2523 */
2524 #ifdef BT848_DEBUG
2525 static int
2526 dump_bt848( bktr_ptr_t bktr )
2527 {
2528 int r[60]={
2529 4, 8, 0xc, 0x8c, 0x10, 0x90, 0x14, 0x94,
2530 0x18, 0x98, 0x1c, 0x9c, 0x20, 0xa0, 0x24, 0xa4,
2531 0x28, 0x2c, 0xac, 0x30, 0x34, 0x38, 0x3c, 0x40,
2532 0xc0, 0x48, 0x4c, 0xcc, 0x50, 0xd0, 0xd4, 0x60,
2533 0x64, 0x68, 0x6c, 0xec, 0xd8, 0xdc, 0xe0, 0xe4,
2534 0, 0, 0, 0
2535 };
2536 int i;
2537
2538 for (i = 0; i < 40; i+=4) {
2539 printf("%s: Reg:value : \t%x:%x \t%x:%x \t %x:%x \t %x:%x\n",
2540 bktr_name(bktr),
2541 r[i], INL(bktr, r[i]),
2542 r[i+1], INL(bktr, r[i+1]),
2543 r[i+2], INL(bktr, r[i+2]),
2544 r[i+3], INL(bktr, r[i+3]]));
2545 }
2546
2547 printf("%s: INT STAT %x \n", bktr_name(bktr),
2548 INL(bktr, BKTR_INT_STAT));
2549 printf("%s: Reg INT_MASK %x \n", bktr_name(bktr),
2550 INL(bktr, BKTR_INT_MASK));
2551 printf("%s: Reg GPIO_DMA_CTL %x \n", bktr_name(bktr),
2552 INW(bktr, BKTR_GPIO_DMA_CTL));
2553
2554 return( 0 );
2555 }
2556
2557 #endif
2558
2559 /*
2560 * build write instruction
2561 */
2562 #define BKTR_FM1 0x6 /* packed data to follow */
2563 #define BKTR_FM3 0xe /* planar data to follow */
2564 #define BKTR_VRE 0x4 /* Marks the end of the even field */
2565 #define BKTR_VRO 0xC /* Marks the end of the odd field */
2566 #define BKTR_PXV 0x0 /* valid word (never used) */
2567 #define BKTR_EOL 0x1 /* last dword, 4 bytes */
2568 #define BKTR_SOL 0x2 /* first dword */
2569
2570 #define OP_WRITE (0x1 << 28)
2571 #define OP_SKIP (0x2 << 28)
2572 #define OP_WRITEC (0x5 << 28)
2573 #define OP_JUMP (0x7 << 28)
2574 #define OP_SYNC (0x8 << 28)
2575 #define OP_WRITE123 (0x9 << 28)
2576 #define OP_WRITES123 (0xb << 28)
2577 #define OP_SOL (1 << 27) /* first instr for scanline */
2578 #define OP_EOL (1 << 26)
2579
2580 #define BKTR_RESYNC (1 << 15)
2581 #define BKTR_GEN_IRQ (1 << 24)
2582
2583 /*
2584 * The RISC status bits can be set/cleared in the RISC programs
2585 * and tested in the Interrupt Handler
2586 */
2587 #define BKTR_SET_RISC_STATUS_BIT0 (1 << 16)
2588 #define BKTR_SET_RISC_STATUS_BIT1 (1 << 17)
2589 #define BKTR_SET_RISC_STATUS_BIT2 (1 << 18)
2590 #define BKTR_SET_RISC_STATUS_BIT3 (1 << 19)
2591
2592 #define BKTR_CLEAR_RISC_STATUS_BIT0 (1 << 20)
2593 #define BKTR_CLEAR_RISC_STATUS_BIT1 (1 << 21)
2594 #define BKTR_CLEAR_RISC_STATUS_BIT2 (1 << 22)
2595 #define BKTR_CLEAR_RISC_STATUS_BIT3 (1 << 23)
2596
2597 #define BKTR_TEST_RISC_STATUS_BIT0 (1 << 28)
2598 #define BKTR_TEST_RISC_STATUS_BIT1 (1 << 29)
2599 #define BKTR_TEST_RISC_STATUS_BIT2 (1 << 30)
2600 #define BKTR_TEST_RISC_STATUS_BIT3 (1 << 31)
2601
2602 static bool_t notclipped (bktr_reg_t * bktr, int x, int width) {
2603 int i;
2604 bktr_clip_t * clip_node;
2605 bktr->clip_start = -1;
2606 bktr->last_y = 0;
2607 bktr->y = 0;
2608 bktr->y2 = width;
2609 bktr->line_length = width;
2610 bktr->yclip = -1;
2611 bktr->yclip2 = -1;
2612 bktr->current_col = 0;
2613
2614 if (bktr->max_clip_node == 0 ) return TRUE;
2615 clip_node = (bktr_clip_t *) &bktr->clip_list[0];
2616
2617
2618 for (i = 0; i < bktr->max_clip_node; i++ ) {
2619 clip_node = (bktr_clip_t *) &bktr->clip_list[i];
2620 if (x >= clip_node->x_min && x <= clip_node->x_max ) {
2621 bktr->clip_start = i;
2622 return FALSE;
2623 }
2624 }
2625
2626 return TRUE;
2627 }
2628
2629 static bool_t getline(bktr_reg_t *bktr, int x ) {
2630 int i, j;
2631 bktr_clip_t * clip_node ;
2632
2633 if (bktr->line_length == 0 ||
2634 bktr->current_col >= bktr->line_length) return FALSE;
2635
2636 bktr->y = min(bktr->last_y, bktr->line_length);
2637 bktr->y2 = bktr->line_length;
2638
2639 bktr->yclip = bktr->yclip2 = -1;
2640 for (i = bktr->clip_start; i < bktr->max_clip_node; i++ ) {
2641 clip_node = (bktr_clip_t *) &bktr->clip_list[i];
2642 if (x >= clip_node->x_min && x <= clip_node->x_max) {
2643 if (bktr->last_y <= clip_node->y_min) {
2644 bktr->y = min(bktr->last_y, bktr->line_length);
2645 bktr->y2 = min(clip_node->y_min, bktr->line_length);
2646 bktr->yclip = min(clip_node->y_min, bktr->line_length);
2647 bktr->yclip2 = min(clip_node->y_max, bktr->line_length);
2648 bktr->last_y = bktr->yclip2;
2649 bktr->clip_start = i;
2650
2651 for (j = i+1; j < bktr->max_clip_node; j++ ) {
2652 clip_node = (bktr_clip_t *) &bktr->clip_list[j];
2653 if (x >= clip_node->x_min && x <= clip_node->x_max) {
2654 if (bktr->last_y >= clip_node->y_min) {
2655 bktr->yclip2 = min(clip_node->y_max, bktr->line_length);
2656 bktr->last_y = bktr->yclip2;
2657 bktr->clip_start = j;
2658 }
2659 } else break ;
2660 }
2661 return TRUE;
2662 }
2663 }
2664 }
2665
2666 if (bktr->current_col <= bktr->line_length) {
2667 bktr->current_col = bktr->line_length;
2668 return TRUE;
2669 }
2670 return FALSE;
2671 }
2672
2673 static bool_t split(bktr_reg_t * bktr, volatile uint32_t **dma_prog, int width ,
2674 u_long operation, int pixel_width,
2675 volatile u_char ** target_buffer, int cols ) {
2676
2677 u_long flag, flag2;
2678 struct meteor_pixfmt *pf = &pixfmt_table[ bktr->pixfmt ].public;
2679 u_int skip, start_skip;
2680
2681 /* For RGB24, we need to align the component in FIFO Byte Lane 0 */
2682 /* to the 1st byte in the mem dword containing our start addr. */
2683 /* BTW, we know this pixfmt's 1st byte is Blue; thus the start addr */
2684 /* must be Blue. */
2685 start_skip = 0;
2686 if (( pf->type == METEOR_PIXTYPE_RGB ) && ( pf->Bpp == 3 ))
2687 switch ( ((uintptr_t) (volatile void *) *target_buffer) % 4 ) {
2688 case 2 : start_skip = 4 ; break;
2689 case 1 : start_skip = 8 ; break;
2690 }
2691
2692 if ((width * pixel_width) < DMA_BT848_SPLIT ) {
2693 if ( width == cols) {
2694 flag = OP_SOL | OP_EOL;
2695 } else if (bktr->current_col == 0 ) {
2696 flag = OP_SOL;
2697 } else if (bktr->current_col == cols) {
2698 flag = OP_EOL;
2699 } else flag = 0;
2700
2701 skip = 0;
2702 if (( flag & OP_SOL ) && ( start_skip > 0 )) {
2703 *(*dma_prog)++ = OP_SKIP | OP_SOL | start_skip;
2704 flag &= ~OP_SOL;
2705 skip = start_skip;
2706 }
2707
2708 *(*dma_prog)++ = operation | flag | (width * pixel_width - skip);
2709 if (operation != OP_SKIP )
2710 *(*dma_prog)++ = (uintptr_t) (volatile void *) *target_buffer;
2711
2712 *target_buffer += width * pixel_width;
2713 bktr->current_col += width;
2714
2715 } else {
2716
2717 if (bktr->current_col == 0 && width == cols) {
2718 flag = OP_SOL ;
2719 flag2 = OP_EOL;
2720 } else if (bktr->current_col == 0 ) {
2721 flag = OP_SOL;
2722 flag2 = 0;
2723 } else if (bktr->current_col >= cols) {
2724 flag = 0;
2725 flag2 = OP_EOL;
2726 } else {
2727 flag = 0;
2728 flag2 = 0;
2729 }
2730
2731 skip = 0;
2732 if (( flag & OP_SOL ) && ( start_skip > 0 )) {
2733 *(*dma_prog)++ = OP_SKIP | OP_SOL | start_skip;
2734 flag &= ~OP_SOL;
2735 skip = start_skip;
2736 }
2737
2738 *(*dma_prog)++ = operation | flag |
2739 (width * pixel_width / 2 - skip);
2740 if (operation != OP_SKIP )
2741 *(*dma_prog)++ = (uintptr_t) (volatile void *) *target_buffer ;
2742 *target_buffer += (width * pixel_width / 2) ;
2743
2744 if ( operation == OP_WRITE )
2745 operation = OP_WRITEC;
2746 *(*dma_prog)++ = operation | flag2 |
2747 (width * pixel_width / 2);
2748 *target_buffer += (width * pixel_width / 2) ;
2749 bktr->current_col += width;
2750
2751 }
2752 return TRUE;
2753 }
2754
2755
2756 /*
2757 * Generate the RISC instructions to capture both VBI and video images
2758 */
2759 static void
2760 rgb_vbi_prog( bktr_ptr_t bktr, char i_flag, int cols, int rows, int interlace )
2761 {
2762 int i;
2763 volatile uint32_t target_buffer, buffer, target,width;
2764 volatile uint32_t pitch;
2765 volatile uint32_t *dma_prog; /* DMA prog is an array of
2766 32 bit RISC instructions */
2767 volatile uint32_t *loop_point;
2768 struct meteor_pixfmt_internal *pf_int = &pixfmt_table[ bktr->pixfmt ];
2769 u_int Bpp = pf_int->public.Bpp;
2770 unsigned int vbisamples; /* VBI samples per line */
2771 unsigned int vbilines; /* VBI lines per field */
2772 unsigned int num_dwords; /* DWORDS per line */
2773
2774 vbisamples = format_params[bktr->format_params].vbi_num_samples;
2775 vbilines = format_params[bktr->format_params].vbi_num_lines;
2776 num_dwords = vbisamples/4;
2777
2778 OUTB(bktr, BKTR_COLOR_FMT, pf_int->color_fmt);
2779 OUTB(bktr, BKTR_ADC, SYNC_LEVEL);
2780 OUTB(bktr, BKTR_VBI_PACK_SIZE, ((num_dwords)) & 0xff);
2781 OUTB(bktr, BKTR_VBI_PACK_DEL, ((num_dwords)>> 8) & 0x01); /* no hdelay */
2782 /* no ext frame */
2783
2784 OUTB(bktr, BKTR_OFORM, 0x00);
2785
2786 OUTB(bktr, BKTR_E_VSCALE_HI, INB(bktr, BKTR_E_VSCALE_HI) | 0x40); /* set chroma comb */
2787 OUTB(bktr, BKTR_O_VSCALE_HI, INB(bktr, BKTR_O_VSCALE_HI) | 0x40);
2788 OUTB(bktr, BKTR_E_VSCALE_HI, INB(bktr, BKTR_E_VSCALE_HI) & ~0x80); /* clear Ycomb */
2789 OUTB(bktr, BKTR_O_VSCALE_HI, INB(bktr, BKTR_O_VSCALE_HI) & ~0x80);
2790
2791 /* disable gamma correction removal */
2792 OUTB(bktr, BKTR_COLOR_CTL, INB(bktr, BKTR_COLOR_CTL) | BT848_COLOR_CTL_GAMMA);
2793
2794 if (cols > 385 ) {
2795 OUTB(bktr, BKTR_E_VTC, 0);
2796 OUTB(bktr, BKTR_O_VTC, 0);
2797 } else {
2798 OUTB(bktr, BKTR_E_VTC, 1);
2799 OUTB(bktr, BKTR_O_VTC, 1);
2800 }
2801 bktr->capcontrol = 3 << 2 | 3;
2802
2803 dma_prog = (uint32_t *) bktr->dma_prog;
2804
2805 /* Construct Write */
2806
2807 if (bktr->video.addr) {
2808 target_buffer = (u_long) bktr->video.addr;
2809 pitch = bktr->video.width;
2810 }
2811 else {
2812 target_buffer = (u_long) vtophys(bktr->bigbuf);
2813 pitch = cols*Bpp;
2814 }
2815
2816 buffer = target_buffer;
2817
2818 /* Wait for the VRE sync marking the end of the Even and
2819 * the start of the Odd field. Resync here.
2820 */
2821 *dma_prog++ = OP_SYNC | BKTR_RESYNC |BKTR_VRE;
2822 *dma_prog++ = 0;
2823
2824 loop_point = dma_prog;
2825
2826 /* store the VBI data */
2827 /* look for sync with packed data */
2828 *dma_prog++ = OP_SYNC | BKTR_FM1;
2829 *dma_prog++ = 0;
2830 for(i = 0; i < vbilines; i++) {
2831 *dma_prog++ = OP_WRITE | OP_SOL | OP_EOL | vbisamples;
2832 *dma_prog++ = (u_long) vtophys((caddr_t)bktr->vbidata +
2833 (i * VBI_LINE_SIZE));
2834 }
2835
2836 if ( (i_flag == 2/*Odd*/) || (i_flag==3) /*interlaced*/ ) {
2837 /* store the Odd field video image */
2838 /* look for sync with packed data */
2839 *dma_prog++ = OP_SYNC | BKTR_FM1;
2840 *dma_prog++ = 0; /* NULL WORD */
2841 width = cols;
2842 for (i = 0; i < (rows/interlace); i++) {
2843 target = target_buffer;
2844 if ( notclipped(bktr, i, width)) {
2845 split(bktr, (volatile uint32_t **) &dma_prog,
2846 bktr->y2 - bktr->y, OP_WRITE,
2847 Bpp, (volatile u_char **)(uintptr_t)&target, cols);
2848
2849 } else {
2850 while(getline(bktr, i)) {
2851 if (bktr->y != bktr->y2 ) {
2852 split(bktr, (volatile uint32_t **) &dma_prog,
2853 bktr->y2 - bktr->y, OP_WRITE,
2854 Bpp, (volatile u_char **)(uintptr_t)&target, cols);
2855 }
2856 if (bktr->yclip != bktr->yclip2 ) {
2857 split(bktr,(volatile uint32_t **) &dma_prog,
2858 bktr->yclip2 - bktr->yclip,
2859 OP_SKIP,
2860 Bpp, (volatile u_char **)(uintptr_t)&target, cols);
2861 }
2862 }
2863
2864 }
2865
2866 target_buffer += interlace * pitch;
2867
2868 }
2869
2870 } /* end if */
2871
2872 /* Grab the Even field */
2873 /* Look for the VRO, end of Odd field, marker */
2874 *dma_prog++ = OP_SYNC | BKTR_GEN_IRQ | BKTR_RESYNC | BKTR_VRO;
2875 *dma_prog++ = 0; /* NULL WORD */
2876
2877 /* store the VBI data */
2878 /* look for sync with packed data */
2879 *dma_prog++ = OP_SYNC | BKTR_FM1;
2880 *dma_prog++ = 0;
2881 for(i = 0; i < vbilines; i++) {
2882 *dma_prog++ = OP_WRITE | OP_SOL | OP_EOL | vbisamples;
2883 *dma_prog++ = (u_long) vtophys((caddr_t)bktr->vbidata +
2884 ((i+MAX_VBI_LINES) * VBI_LINE_SIZE));
2885 }
2886
2887 /* store the video image */
2888 if (i_flag == 1) /*Even Only*/
2889 target_buffer = buffer;
2890 if (i_flag == 3) /*interlaced*/
2891 target_buffer = buffer+pitch;
2892
2893
2894 if ((i_flag == 1) /*Even Only*/ || (i_flag==3) /*interlaced*/) {
2895 /* look for sync with packed data */
2896 *dma_prog++ = OP_SYNC | BKTR_FM1;
2897 *dma_prog++ = 0; /* NULL WORD */
2898 width = cols;
2899 for (i = 0; i < (rows/interlace); i++) {
2900 target = target_buffer;
2901 if ( notclipped(bktr, i, width)) {
2902 split(bktr, (volatile uint32_t **) &dma_prog,
2903 bktr->y2 - bktr->y, OP_WRITE,
2904 Bpp, (volatile u_char **)(uintptr_t)&target, cols);
2905 } else {
2906 while(getline(bktr, i)) {
2907 if (bktr->y != bktr->y2 ) {
2908 split(bktr, (volatile uint32_t **) &dma_prog,
2909 bktr->y2 - bktr->y, OP_WRITE,
2910 Bpp, (volatile u_char **)(uintptr_t)&target,
2911 cols);
2912 }
2913 if (bktr->yclip != bktr->yclip2 ) {
2914 split(bktr, (volatile uint32_t **) &dma_prog,
2915 bktr->yclip2 - bktr->yclip, OP_SKIP,
2916 Bpp, (volatile u_char **)(uintptr_t) &target, cols);
2917 }
2918
2919 }
2920
2921 }
2922
2923 target_buffer += interlace * pitch;
2924
2925 }
2926 }
2927
2928 /* Look for end of 'Even Field' */
2929 *dma_prog++ = OP_SYNC | BKTR_GEN_IRQ | BKTR_RESYNC | BKTR_VRE;
2930 *dma_prog++ = 0; /* NULL WORD */
2931
2932 *dma_prog++ = OP_JUMP ;
2933 *dma_prog++ = (u_long ) vtophys(loop_point) ;
2934 *dma_prog++ = 0; /* NULL WORD */
2935
2936 }
2937
2938
2939
2940
2941 static void
2942 rgb_prog( bktr_ptr_t bktr, char i_flag, int cols, int rows, int interlace )
2943 {
2944 int i;
2945 volatile uint32_t target_buffer, buffer, target,width;
2946 volatile uint32_t pitch;
2947 volatile uint32_t *dma_prog;
2948 struct meteor_pixfmt_internal *pf_int = &pixfmt_table[ bktr->pixfmt ];
2949 u_int Bpp = pf_int->public.Bpp;
2950
2951 OUTB(bktr, BKTR_COLOR_FMT, pf_int->color_fmt);
2952 OUTB(bktr, BKTR_VBI_PACK_SIZE, 0);
2953 OUTB(bktr, BKTR_VBI_PACK_DEL, 0);
2954 OUTB(bktr, BKTR_ADC, SYNC_LEVEL);
2955
2956 OUTB(bktr, BKTR_OFORM, 0x00);
2957
2958 OUTB(bktr, BKTR_E_VSCALE_HI, INB(bktr, BKTR_E_VSCALE_HI) | 0x40); /* set chroma comb */
2959 OUTB(bktr, BKTR_O_VSCALE_HI, INB(bktr, BKTR_O_VSCALE_HI) | 0x40);
2960 OUTB(bktr, BKTR_E_VSCALE_HI, INB(bktr, BKTR_E_VSCALE_HI) & ~0x80); /* clear Ycomb */
2961 OUTB(bktr, BKTR_O_VSCALE_HI, INB(bktr, BKTR_O_VSCALE_HI) & ~0x80);
2962
2963 /* disable gamma correction removal */
2964 OUTB(bktr, BKTR_COLOR_CTL, INB(bktr, BKTR_COLOR_CTL) | BT848_COLOR_CTL_GAMMA);
2965
2966 if (cols > 385 ) {
2967 OUTB(bktr, BKTR_E_VTC, 0);
2968 OUTB(bktr, BKTR_O_VTC, 0);
2969 } else {
2970 OUTB(bktr, BKTR_E_VTC, 1);
2971 OUTB(bktr, BKTR_O_VTC, 1);
2972 }
2973 bktr->capcontrol = 3 << 2 | 3;
2974
2975 dma_prog = (uint32_t *) bktr->dma_prog;
2976
2977 /* Construct Write */
2978
2979 if (bktr->video.addr) {
2980 target_buffer = (uint32_t) bktr->video.addr;
2981 pitch = bktr->video.width;
2982 }
2983 else {
2984 target_buffer = (uint32_t) vtophys(bktr->bigbuf);
2985 pitch = cols*Bpp;
2986 }
2987
2988 buffer = target_buffer;
2989
2990 /* contruct sync : for video packet format */
2991 *dma_prog++ = OP_SYNC | BKTR_RESYNC | BKTR_FM1;
2992
2993 /* sync, mode indicator packed data */
2994 *dma_prog++ = 0; /* NULL WORD */
2995 width = cols;
2996 for (i = 0; i < (rows/interlace); i++) {
2997 target = target_buffer;
2998 if ( notclipped(bktr, i, width)) {
2999 split(bktr, (volatile uint32_t **) &dma_prog,
3000 bktr->y2 - bktr->y, OP_WRITE,
3001 Bpp, (volatile u_char **)(uintptr_t)&target, cols);
3002
3003 } else {
3004 while(getline(bktr, i)) {
3005 if (bktr->y != bktr->y2 ) {
3006 split(bktr, (volatile uint32_t **) &dma_prog,
3007 bktr->y2 - bktr->y, OP_WRITE,
3008 Bpp, (volatile u_char **)(uintptr_t)&target, cols);
3009 }
3010 if (bktr->yclip != bktr->yclip2 ) {
3011 split(bktr,(volatile uint32_t **) &dma_prog,
3012 bktr->yclip2 - bktr->yclip,
3013 OP_SKIP,
3014 Bpp, (volatile u_char **)(uintptr_t)&target, cols);
3015 }
3016 }
3017
3018 }
3019
3020 target_buffer += interlace * pitch;
3021
3022 }
3023
3024 switch (i_flag) {
3025 case 1:
3026 /* sync vre */
3027 *dma_prog++ = OP_SYNC | BKTR_GEN_IRQ | BKTR_VRO;
3028 *dma_prog++ = 0; /* NULL WORD */
3029
3030 *dma_prog++ = OP_JUMP;
3031 *dma_prog++ = (uint32_t ) vtophys(bktr->dma_prog);
3032 return;
3033
3034 case 2:
3035 /* sync vro */
3036 *dma_prog++ = OP_SYNC | BKTR_GEN_IRQ | BKTR_VRE;
3037 *dma_prog++ = 0; /* NULL WORD */
3038
3039 *dma_prog++ = OP_JUMP;
3040 *dma_prog++ = (uint32_t ) vtophys(bktr->dma_prog);
3041 return;
3042
3043 case 3:
3044 /* sync vro */
3045 *dma_prog++ = OP_SYNC | BKTR_GEN_IRQ | BKTR_RESYNC | BKTR_VRO;
3046 *dma_prog++ = 0; /* NULL WORD */
3047 *dma_prog++ = OP_JUMP; ;
3048 *dma_prog = (uint32_t ) vtophys(bktr->odd_dma_prog);
3049 break;
3050 }
3051
3052 if (interlace == 2) {
3053
3054 target_buffer = buffer + pitch;
3055
3056 dma_prog = (uint32_t *) bktr->odd_dma_prog;
3057
3058 /* sync vre IRQ bit */
3059 *dma_prog++ = OP_SYNC | BKTR_RESYNC | BKTR_FM1;
3060 *dma_prog++ = 0; /* NULL WORD */
3061 width = cols;
3062 for (i = 0; i < (rows/interlace); i++) {
3063 target = target_buffer;
3064 if ( notclipped(bktr, i, width)) {
3065 split(bktr, (volatile uint32_t **) &dma_prog,
3066 bktr->y2 - bktr->y, OP_WRITE,
3067 Bpp, (volatile u_char **)(uintptr_t)&target, cols);
3068 } else {
3069 while(getline(bktr, i)) {
3070 if (bktr->y != bktr->y2 ) {
3071 split(bktr, (volatile uint32_t **) &dma_prog,
3072 bktr->y2 - bktr->y, OP_WRITE,
3073 Bpp, (volatile u_char **)(uintptr_t)&target,
3074 cols);
3075 }
3076 if (bktr->yclip != bktr->yclip2 ) {
3077 split(bktr, (volatile uint32_t **) &dma_prog,
3078 bktr->yclip2 - bktr->yclip, OP_SKIP,
3079 Bpp, (volatile u_char **)(uintptr_t)&target, cols);
3080 }
3081
3082 }
3083
3084 }
3085
3086 target_buffer += interlace * pitch;
3087
3088 }
3089 }
3090
3091 /* sync vre IRQ bit */
3092 *dma_prog++ = OP_SYNC | BKTR_GEN_IRQ | BKTR_RESYNC | BKTR_VRE;
3093 *dma_prog++ = 0; /* NULL WORD */
3094 *dma_prog++ = OP_JUMP ;
3095 *dma_prog++ = (uint32_t ) vtophys(bktr->dma_prog) ;
3096 *dma_prog++ = 0; /* NULL WORD */
3097 }
3098
3099
3100 /*
3101 *
3102 */
3103 static void
3104 yuvpack_prog( bktr_ptr_t bktr, char i_flag,
3105 int cols, int rows, int interlace )
3106 {
3107 int i;
3108 volatile unsigned int inst;
3109 volatile unsigned int inst3;
3110 volatile uint32_t target_buffer, buffer;
3111 volatile uint32_t *dma_prog;
3112 struct meteor_pixfmt_internal *pf_int = &pixfmt_table[ bktr->pixfmt ];
3113 int b;
3114
3115 OUTB(bktr, BKTR_COLOR_FMT, pf_int->color_fmt);
3116
3117 OUTB(bktr, BKTR_E_SCLOOP, INB(bktr, BKTR_E_SCLOOP) | BT848_E_SCLOOP_CAGC); /* enable chroma comb */
3118 OUTB(bktr, BKTR_O_SCLOOP, INB(bktr, BKTR_O_SCLOOP) | BT848_O_SCLOOP_CAGC);
3119
3120 OUTB(bktr, BKTR_COLOR_CTL, INB(bktr, BKTR_COLOR_CTL) | BT848_COLOR_CTL_RGB_DED | BT848_COLOR_CTL_GAMMA);
3121 OUTB(bktr, BKTR_ADC, SYNC_LEVEL);
3122
3123 bktr->capcontrol = 1 << 6 | 1 << 4 | 1 << 2 | 3;
3124 bktr->capcontrol = 3 << 2 | 3;
3125
3126 dma_prog = (uint32_t *) bktr->dma_prog;
3127
3128 /* Construct Write */
3129
3130 /* write , sol, eol */
3131 inst = OP_WRITE | OP_SOL | (cols);
3132 /* write , sol, eol */
3133 inst3 = OP_WRITE | OP_EOL | (cols);
3134
3135 if (bktr->video.addr)
3136 target_buffer = (uint32_t) bktr->video.addr;
3137 else
3138 target_buffer = (uint32_t) vtophys(bktr->bigbuf);
3139
3140 buffer = target_buffer;
3141
3142 /* contruct sync : for video packet format */
3143 /* sync, mode indicator packed data */
3144 *dma_prog++ = OP_SYNC | BKTR_RESYNC | BKTR_FM1;
3145 *dma_prog++ = 0; /* NULL WORD */
3146
3147 b = cols;
3148
3149 for (i = 0; i < (rows/interlace); i++) {
3150 *dma_prog++ = inst;
3151 *dma_prog++ = target_buffer;
3152 *dma_prog++ = inst3;
3153 *dma_prog++ = target_buffer + b;
3154 target_buffer += interlace*(cols * 2);
3155 }
3156
3157 switch (i_flag) {
3158 case 1:
3159 /* sync vre */
3160 *dma_prog++ = OP_SYNC | BKTR_GEN_IRQ | BKTR_VRE;
3161 *dma_prog++ = 0; /* NULL WORD */
3162
3163 *dma_prog++ = OP_JUMP;
3164 *dma_prog++ = (uint32_t) vtophys(bktr->dma_prog);
3165 return;
3166
3167 case 2:
3168 /* sync vro */
3169 *dma_prog++ = OP_SYNC | BKTR_GEN_IRQ | BKTR_VRO;
3170 *dma_prog++ = 0; /* NULL WORD */
3171 *dma_prog++ = OP_JUMP;
3172 *dma_prog++ = (uint32_t) vtophys(bktr->dma_prog);
3173 return;
3174
3175 case 3:
3176 /* sync vro */
3177 *dma_prog++ = OP_SYNC | BKTR_GEN_IRQ | BKTR_RESYNC | BKTR_VRO;
3178 *dma_prog++ = 0; /* NULL WORD */
3179 *dma_prog++ = OP_JUMP ;
3180 *dma_prog = (uint32_t) vtophys(bktr->odd_dma_prog);
3181 break;
3182 }
3183
3184 if (interlace == 2) {
3185
3186 target_buffer = (uint32_t) buffer + cols*2;
3187
3188 dma_prog = (uint32_t *) bktr->odd_dma_prog;
3189
3190 /* sync vre */
3191 *dma_prog++ = OP_SYNC | BKTR_RESYNC | BKTR_FM1;
3192 *dma_prog++ = 0; /* NULL WORD */
3193
3194 for (i = 0; i < (rows/interlace) ; i++) {
3195 *dma_prog++ = inst;
3196 *dma_prog++ = target_buffer;
3197 *dma_prog++ = inst3;
3198 *dma_prog++ = target_buffer + b;
3199 target_buffer += interlace * ( cols*2);
3200 }
3201 }
3202
3203 /* sync vro IRQ bit */
3204 *dma_prog++ = OP_SYNC | BKTR_GEN_IRQ | BKTR_RESYNC | BKTR_VRE;
3205 *dma_prog++ = 0; /* NULL WORD */
3206 *dma_prog++ = OP_JUMP ;
3207 *dma_prog++ = (uint32_t) vtophys(bktr->dma_prog);
3208
3209 *dma_prog++ = OP_JUMP;
3210 *dma_prog++ = (uint32_t) vtophys(bktr->dma_prog);
3211 *dma_prog++ = 0; /* NULL WORD */
3212 }
3213
3214
3215 /*
3216 *
3217 */
3218 static void
3219 yuv422_prog( bktr_ptr_t bktr, char i_flag,
3220 int cols, int rows, int interlace ){
3221
3222 int i;
3223 volatile unsigned int inst;
3224 volatile uint32_t target_buffer, t1, buffer;
3225 volatile uint32_t *dma_prog;
3226 struct meteor_pixfmt_internal *pf_int = &pixfmt_table[ bktr->pixfmt ];
3227
3228 OUTB(bktr, BKTR_COLOR_FMT, pf_int->color_fmt);
3229
3230 dma_prog = (uint32_t*) bktr->dma_prog;
3231
3232 bktr->capcontrol = 1 << 6 | 1 << 4 | 3;
3233
3234 OUTB(bktr, BKTR_ADC, SYNC_LEVEL);
3235 OUTB(bktr, BKTR_OFORM, 0x00);
3236
3237 OUTB(bktr, BKTR_E_CONTROL, INB(bktr, BKTR_E_CONTROL) | BT848_E_CONTROL_LDEC); /* disable luma decimation */
3238 OUTB(bktr, BKTR_O_CONTROL, INB(bktr, BKTR_O_CONTROL) | BT848_O_CONTROL_LDEC);
3239
3240 OUTB(bktr, BKTR_E_SCLOOP, INB(bktr, BKTR_E_SCLOOP) | BT848_E_SCLOOP_CAGC); /* chroma agc enable */
3241 OUTB(bktr, BKTR_O_SCLOOP, INB(bktr, BKTR_O_SCLOOP) | BT848_O_SCLOOP_CAGC);
3242
3243 OUTB(bktr, BKTR_E_VSCALE_HI, INB(bktr, BKTR_E_VSCALE_HI) & ~0x80); /* clear Ycomb */
3244 OUTB(bktr, BKTR_O_VSCALE_HI, INB(bktr, BKTR_O_VSCALE_HI) & ~0x80);
3245 OUTB(bktr, BKTR_E_VSCALE_HI, INB(bktr, BKTR_E_VSCALE_HI) | 0x40); /* set chroma comb */
3246 OUTB(bktr, BKTR_O_VSCALE_HI, INB(bktr, BKTR_O_VSCALE_HI) | 0x40);
3247
3248 /* disable gamma correction removal */
3249 OUTB(bktr, BKTR_COLOR_CTL, INB(bktr, BKTR_COLOR_CTL) | BT848_COLOR_CTL_GAMMA);
3250
3251 /* Construct Write */
3252 inst = OP_WRITE123 | OP_SOL | OP_EOL | (cols);
3253 if (bktr->video.addr)
3254 target_buffer = (uint32_t) bktr->video.addr;
3255 else
3256 target_buffer = (uint32_t) vtophys(bktr->bigbuf);
3257
3258 buffer = target_buffer;
3259
3260 t1 = buffer;
3261
3262 /* contruct sync : for video packet format */
3263 *dma_prog++ = OP_SYNC | 1 << 15 | BKTR_FM3; /*sync, mode indicator packed data*/
3264 *dma_prog++ = 0; /* NULL WORD */
3265
3266 for (i = 0; i < (rows/interlace ) ; i++) {
3267 *dma_prog++ = inst;
3268 *dma_prog++ = cols/2 | cols/2 << 16;
3269 *dma_prog++ = target_buffer;
3270 *dma_prog++ = t1 + (cols*rows) + i*cols/2 * interlace;
3271 *dma_prog++ = t1 + (cols*rows) + (cols*rows/2) + i*cols/2 * interlace;
3272 target_buffer += interlace*cols;
3273 }
3274
3275 switch (i_flag) {
3276 case 1:
3277 *dma_prog++ = OP_SYNC | 1 << 24 | BKTR_VRE; /*sync vre*/
3278 *dma_prog++ = 0; /* NULL WORD */
3279
3280 *dma_prog++ = OP_JUMP ;
3281 *dma_prog++ = (uint32_t) vtophys(bktr->dma_prog);
3282 return;
3283
3284 case 2:
3285 *dma_prog++ = OP_SYNC | 1 << 24 | BKTR_VRO; /*sync vre*/
3286 *dma_prog++ = 0; /* NULL WORD */
3287
3288 *dma_prog++ = OP_JUMP;
3289 *dma_prog++ = (uint32_t) vtophys(bktr->dma_prog);
3290 return;
3291
3292 case 3:
3293 *dma_prog++ = OP_SYNC | 1 << 24 | 1 << 15 | BKTR_VRO;
3294 *dma_prog++ = 0; /* NULL WORD */
3295
3296 *dma_prog++ = OP_JUMP ;
3297 *dma_prog = (uint32_t) vtophys(bktr->odd_dma_prog);
3298 break;
3299 }
3300
3301 if (interlace == 2) {
3302
3303 dma_prog = (uint32_t *) bktr->odd_dma_prog;
3304
3305 target_buffer = (uint32_t) buffer + cols;
3306 t1 = buffer + cols/2;
3307 *dma_prog++ = OP_SYNC | 1 << 15 | BKTR_FM3;
3308 *dma_prog++ = 0; /* NULL WORD */
3309
3310 for (i = 0; i < (rows/interlace ) ; i++) {
3311 *dma_prog++ = inst;
3312 *dma_prog++ = cols/2 | cols/2 << 16;
3313 *dma_prog++ = target_buffer;
3314 *dma_prog++ = t1 + (cols*rows) + i*cols/2 * interlace;
3315 *dma_prog++ = t1 + (cols*rows) + (cols*rows/2) + i*cols/2 * interlace;
3316 target_buffer += interlace*cols;
3317 }
3318 }
3319
3320 *dma_prog++ = OP_SYNC | 1 << 24 | 1 << 15 | BKTR_VRE;
3321 *dma_prog++ = 0; /* NULL WORD */
3322 *dma_prog++ = OP_JUMP ;
3323 *dma_prog++ = (uint32_t) vtophys(bktr->dma_prog) ;
3324 *dma_prog++ = 0; /* NULL WORD */
3325 }
3326
3327
3328 /*
3329 *
3330 */
3331 static void
3332 yuv12_prog( bktr_ptr_t bktr, char i_flag,
3333 int cols, int rows, int interlace ){
3334
3335 int i;
3336 volatile unsigned int inst;
3337 volatile unsigned int inst1;
3338 volatile uint32_t target_buffer, t1, buffer;
3339 volatile uint32_t *dma_prog;
3340 struct meteor_pixfmt_internal *pf_int = &pixfmt_table[ bktr->pixfmt ];
3341
3342 OUTB(bktr, BKTR_COLOR_FMT, pf_int->color_fmt);
3343
3344 dma_prog = (uint32_t *) bktr->dma_prog;
3345
3346 bktr->capcontrol = 1 << 6 | 1 << 4 | 3;
3347
3348 OUTB(bktr, BKTR_ADC, SYNC_LEVEL);
3349 OUTB(bktr, BKTR_OFORM, 0x0);
3350
3351 /* Construct Write */
3352 inst = OP_WRITE123 | OP_SOL | OP_EOL | (cols);
3353 inst1 = OP_WRITES123 | OP_SOL | OP_EOL | (cols);
3354 if (bktr->video.addr)
3355 target_buffer = (uint32_t) bktr->video.addr;
3356 else
3357 target_buffer = (uint32_t) vtophys(bktr->bigbuf);
3358
3359 buffer = target_buffer;
3360 t1 = buffer;
3361
3362 *dma_prog++ = OP_SYNC | 1 << 15 | BKTR_FM3; /*sync, mode indicator packed data*/
3363 *dma_prog++ = 0; /* NULL WORD */
3364
3365 for (i = 0; i < (rows/interlace )/2 ; i++) {
3366 *dma_prog++ = inst;
3367 *dma_prog++ = cols/2 | (cols/2 << 16);
3368 *dma_prog++ = target_buffer;
3369 *dma_prog++ = t1 + (cols*rows) + i*cols/2 * interlace;
3370 *dma_prog++ = t1 + (cols*rows) + (cols*rows/4) + i*cols/2 * interlace;
3371 target_buffer += interlace*cols;
3372 *dma_prog++ = inst1;
3373 *dma_prog++ = cols/2 | (cols/2 << 16);
3374 *dma_prog++ = target_buffer;
3375 target_buffer += interlace*cols;
3376
3377 }
3378
3379 switch (i_flag) {
3380 case 1:
3381 *dma_prog++ = OP_SYNC | 1 << 24 | BKTR_VRE; /*sync vre*/
3382 *dma_prog++ = 0; /* NULL WORD */
3383
3384 *dma_prog++ = OP_JUMP;
3385 *dma_prog++ = (uint32_t) vtophys(bktr->dma_prog);
3386 return;
3387
3388 case 2:
3389 *dma_prog++ = OP_SYNC | 1 << 24 | BKTR_VRO; /*sync vro*/
3390 *dma_prog++ = 0; /* NULL WORD */
3391
3392 *dma_prog++ = OP_JUMP;
3393 *dma_prog++ = (uint32_t) vtophys(bktr->dma_prog);
3394 return;
3395
3396 case 3:
3397 *dma_prog++ = OP_SYNC | 1 << 24 | 1 << 15 | BKTR_VRO;
3398 *dma_prog++ = 0; /* NULL WORD */
3399 *dma_prog++ = OP_JUMP ;
3400 *dma_prog = (uint32_t) vtophys(bktr->odd_dma_prog);
3401 break;
3402 }
3403
3404 if (interlace == 2) {
3405
3406 dma_prog = (uint32_t *) bktr->odd_dma_prog;
3407
3408 target_buffer = (uint32_t) buffer + cols;
3409 t1 = buffer + cols/2;
3410 *dma_prog++ = OP_SYNC | 1 << 15 | BKTR_FM3;
3411 *dma_prog++ = 0; /* NULL WORD */
3412
3413 for (i = 0; i < ((rows/interlace )/2 ) ; i++) {
3414 *dma_prog++ = inst;
3415 *dma_prog++ = cols/2 | (cols/2 << 16);
3416 *dma_prog++ = target_buffer;
3417 *dma_prog++ = t1 + (cols*rows) + i*cols/2 * interlace;
3418 *dma_prog++ = t1 + (cols*rows) + (cols*rows/4) + i*cols/2 * interlace;
3419 target_buffer += interlace*cols;
3420 *dma_prog++ = inst1;
3421 *dma_prog++ = cols/2 | (cols/2 << 16);
3422 *dma_prog++ = target_buffer;
3423 target_buffer += interlace*cols;
3424
3425 }
3426
3427
3428 }
3429
3430 *dma_prog++ = OP_SYNC | 1 << 24 | 1 << 15 | BKTR_VRE;
3431 *dma_prog++ = 0; /* NULL WORD */
3432 *dma_prog++ = OP_JUMP;
3433 *dma_prog++ = (uint32_t) vtophys(bktr->dma_prog);
3434 *dma_prog++ = 0; /* NULL WORD */
3435 }
3436
3437
3438
3439 /*
3440 *
3441 */
3442 static void
3443 build_dma_prog( bktr_ptr_t bktr, char i_flag )
3444 {
3445 int rows, cols, interlace;
3446 int tmp_int;
3447 unsigned int temp;
3448 struct format_params *fp;
3449 struct meteor_pixfmt_internal *pf_int = &pixfmt_table[ bktr->pixfmt ];
3450
3451
3452 fp = &format_params[bktr->format_params];
3453
3454 OUTL(bktr, BKTR_INT_MASK, ALL_INTS_DISABLED);
3455
3456 /* disable FIFO & RISC, leave other bits alone */
3457 OUTW(bktr, BKTR_GPIO_DMA_CTL, INW(bktr, BKTR_GPIO_DMA_CTL) & ~FIFO_RISC_ENABLED);
3458
3459 /* set video parameters */
3460 if (bktr->capture_area_enabled)
3461 temp = ((quad_t ) fp->htotal* (quad_t) bktr->capture_area_x_size * 4096
3462 / fp->scaled_htotal / bktr->cols) - 4096;
3463 else
3464 temp = ((quad_t ) fp->htotal* (quad_t) fp->scaled_hactive * 4096
3465 / fp->scaled_htotal / bktr->cols) - 4096;
3466
3467 /* printf("%s: HSCALE value is %d\n", bktr_name(bktr), temp); */
3468 OUTB(bktr, BKTR_E_HSCALE_LO, temp & 0xff);
3469 OUTB(bktr, BKTR_O_HSCALE_LO, temp & 0xff);
3470 OUTB(bktr, BKTR_E_HSCALE_HI, (temp >> 8) & 0xff);
3471 OUTB(bktr, BKTR_O_HSCALE_HI, (temp >> 8) & 0xff);
3472
3473 /* horizontal active */
3474 temp = bktr->cols;
3475 /* printf("%s: HACTIVE value is %d\n", bktr_name(bktr), temp); */
3476 OUTB(bktr, BKTR_E_HACTIVE_LO, temp & 0xff);
3477 OUTB(bktr, BKTR_O_HACTIVE_LO, temp & 0xff);
3478 OUTB(bktr, BKTR_E_CROP, INB(bktr, BKTR_E_CROP) & ~0x3);
3479 OUTB(bktr, BKTR_O_CROP, INB(bktr, BKTR_O_CROP) & ~0x3);
3480 OUTB(bktr, BKTR_E_CROP, INB(bktr, BKTR_E_CROP) | ((temp >> 8) & 0x3));
3481 OUTB(bktr, BKTR_O_CROP, INB(bktr, BKTR_O_CROP) | ((temp >> 8) & 0x3));
3482
3483 /* horizontal delay */
3484 if (bktr->capture_area_enabled)
3485 temp = ( (fp->hdelay* fp->scaled_hactive + bktr->capture_area_x_offset* fp->scaled_htotal)
3486 * bktr->cols) / (bktr->capture_area_x_size * fp->hactive);
3487 else
3488 temp = (fp->hdelay * bktr->cols) / fp->hactive;
3489
3490 temp = temp & 0x3fe;
3491
3492 /* printf("%s: HDELAY value is %d\n", bktr_name(bktr), temp); */
3493 OUTB(bktr, BKTR_E_DELAY_LO, temp & 0xff);
3494 OUTB(bktr, BKTR_O_DELAY_LO, temp & 0xff);
3495 OUTB(bktr, BKTR_E_CROP, INB(bktr, BKTR_E_CROP) & ~0xc);
3496 OUTB(bktr, BKTR_O_CROP, INB(bktr, BKTR_O_CROP) & ~0xc);
3497 OUTB(bktr, BKTR_E_CROP, INB(bktr, BKTR_E_CROP) | ((temp >> 6) & 0xc));
3498 OUTB(bktr, BKTR_O_CROP, INB(bktr, BKTR_O_CROP) | ((temp >> 6) & 0xc));
3499
3500 /* vertical scale */
3501
3502 if (bktr->capture_area_enabled) {
3503 if (bktr->flags & METEOR_ONLY_ODD_FIELDS ||
3504 bktr->flags & METEOR_ONLY_EVEN_FIELDS)
3505 tmp_int = 65536 -
3506 (((bktr->capture_area_y_size * 256 + (bktr->rows/2)) / bktr->rows) - 512);
3507 else {
3508 tmp_int = 65536 -
3509 (((bktr->capture_area_y_size * 512 + (bktr->rows / 2)) / bktr->rows) - 512);
3510 }
3511 } else {
3512 if (bktr->flags & METEOR_ONLY_ODD_FIELDS ||
3513 bktr->flags & METEOR_ONLY_EVEN_FIELDS)
3514 tmp_int = 65536 -
3515 (((fp->vactive * 256 + (bktr->rows/2)) / bktr->rows) - 512);
3516 else {
3517 tmp_int = 65536 -
3518 (((fp->vactive * 512 + (bktr->rows / 2)) / bktr->rows) - 512);
3519 }
3520 }
3521
3522 tmp_int &= 0x1fff;
3523 /* printf("%s: VSCALE value is %d\n", bktr_name(bktr), tmp_int); */
3524 OUTB(bktr, BKTR_E_VSCALE_LO, tmp_int & 0xff);
3525 OUTB(bktr, BKTR_O_VSCALE_LO, tmp_int & 0xff);
3526 OUTB(bktr, BKTR_E_VSCALE_HI, INB(bktr, BKTR_E_VSCALE_HI) & ~0x1f);
3527 OUTB(bktr, BKTR_O_VSCALE_HI, INB(bktr, BKTR_O_VSCALE_HI) & ~0x1f);
3528 OUTB(bktr, BKTR_E_VSCALE_HI, INB(bktr, BKTR_E_VSCALE_HI) | ((tmp_int >> 8) & 0x1f));
3529 OUTB(bktr, BKTR_O_VSCALE_HI, INB(bktr, BKTR_O_VSCALE_HI) | ((tmp_int >> 8) & 0x1f));
3530
3531
3532 /* vertical active */
3533 if (bktr->capture_area_enabled)
3534 temp = bktr->capture_area_y_size;
3535 else
3536 temp = fp->vactive;
3537 /* printf("%s: VACTIVE is %d\n", bktr_name(bktr), temp); */
3538 OUTB(bktr, BKTR_E_CROP, INB(bktr, BKTR_E_CROP) & ~0x30);
3539 OUTB(bktr, BKTR_E_CROP, INB(bktr, BKTR_E_CROP) | ((temp >> 4) & 0x30));
3540 OUTB(bktr, BKTR_E_VACTIVE_LO, temp & 0xff);
3541 OUTB(bktr, BKTR_O_CROP, INB(bktr, BKTR_O_CROP) & ~0x30);
3542 OUTB(bktr, BKTR_O_CROP, INB(bktr, BKTR_O_CROP) | ((temp >> 4) & 0x30));
3543 OUTB(bktr, BKTR_O_VACTIVE_LO, temp & 0xff);
3544
3545 /* vertical delay */
3546 if (bktr->capture_area_enabled)
3547 temp = fp->vdelay + (bktr->capture_area_y_offset);
3548 else
3549 temp = fp->vdelay;
3550 /* printf("%s: VDELAY is %d\n", bktr_name(bktr), temp); */
3551 OUTB(bktr, BKTR_E_CROP, INB(bktr, BKTR_E_CROP) & ~0xC0);
3552 OUTB(bktr, BKTR_E_CROP, INB(bktr, BKTR_E_CROP) | ((temp >> 2) & 0xC0));
3553 OUTB(bktr, BKTR_E_VDELAY_LO, temp & 0xff);
3554 OUTB(bktr, BKTR_O_CROP, INB(bktr, BKTR_O_CROP) & ~0xC0);
3555 OUTB(bktr, BKTR_O_CROP, INB(bktr, BKTR_O_CROP) | ((temp >> 2) & 0xC0));
3556 OUTB(bktr, BKTR_O_VDELAY_LO, temp & 0xff);
3557
3558 /* end of video params */
3559
3560 if ((bktr->xtal_pll_mode == BT848_USE_PLL)
3561 && (fp->iform_xtsel==BT848_IFORM_X_XT1)) {
3562 OUTB(bktr, BKTR_TGCTRL, BT848_TGCTRL_TGCKI_PLL); /* Select PLL mode */
3563 } else {
3564 OUTB(bktr, BKTR_TGCTRL, BT848_TGCTRL_TGCKI_XTAL); /* Select Normal xtal 0/xtal 1 mode */
3565 }
3566
3567 /* capture control */
3568 switch (i_flag) {
3569 case 1:
3570 bktr->bktr_cap_ctl =
3571 (BT848_CAP_CTL_DITH_FRAME | BT848_CAP_CTL_EVEN);
3572 OUTB(bktr, BKTR_E_VSCALE_HI, INB(bktr, BKTR_E_VSCALE_HI) & ~0x20);
3573 OUTB(bktr, BKTR_O_VSCALE_HI, INB(bktr, BKTR_O_VSCALE_HI) & ~0x20);
3574 interlace = 1;
3575 break;
3576 case 2:
3577 bktr->bktr_cap_ctl =
3578 (BT848_CAP_CTL_DITH_FRAME | BT848_CAP_CTL_ODD);
3579 OUTB(bktr, BKTR_E_VSCALE_HI, INB(bktr, BKTR_E_VSCALE_HI) & ~0x20);
3580 OUTB(bktr, BKTR_O_VSCALE_HI, INB(bktr, BKTR_O_VSCALE_HI) & ~0x20);
3581 interlace = 1;
3582 break;
3583 default:
3584 bktr->bktr_cap_ctl =
3585 (BT848_CAP_CTL_DITH_FRAME |
3586 BT848_CAP_CTL_EVEN | BT848_CAP_CTL_ODD);
3587 OUTB(bktr, BKTR_E_VSCALE_HI, INB(bktr, BKTR_E_VSCALE_HI) | 0x20);
3588 OUTB(bktr, BKTR_O_VSCALE_HI, INB(bktr, BKTR_O_VSCALE_HI) | 0x20);
3589 interlace = 2;
3590 break;
3591 }
3592
3593 OUTL(bktr, BKTR_RISC_STRT_ADD, vtophys(bktr->dma_prog));
3594
3595 rows = bktr->rows;
3596 cols = bktr->cols;
3597
3598 bktr->vbiflags &= ~VBI_CAPTURE; /* default - no vbi capture */
3599
3600 /* RGB Grabs. If /dev/vbi is already open, or we are a PAL/SECAM */
3601 /* user, then use the rgb_vbi RISC program. */
3602 /* Otherwise, use the normal rgb RISC program */
3603 if (pf_int->public.type == METEOR_PIXTYPE_RGB) {
3604 if ( (bktr->vbiflags & VBI_OPEN)
3605 ||(bktr->format_params == BT848_IFORM_F_PALBDGHI)
3606 ||(bktr->format_params == BT848_IFORM_F_SECAM)
3607 ){
3608 bktr->bktr_cap_ctl |=
3609 BT848_CAP_CTL_VBI_EVEN | BT848_CAP_CTL_VBI_ODD;
3610 bktr->vbiflags |= VBI_CAPTURE;
3611 rgb_vbi_prog(bktr, i_flag, cols, rows, interlace);
3612 return;
3613 } else {
3614 rgb_prog(bktr, i_flag, cols, rows, interlace);
3615 return;
3616 }
3617 }
3618
3619 if ( pf_int->public.type == METEOR_PIXTYPE_YUV ) {
3620 yuv422_prog(bktr, i_flag, cols, rows, interlace);
3621 OUTB(bktr, BKTR_COLOR_CTL, (INB(bktr, BKTR_COLOR_CTL) & 0xf0)
3622 | pixfmt_swap_flags( bktr->pixfmt ));
3623 return;
3624 }
3625
3626 if ( pf_int->public.type == METEOR_PIXTYPE_YUV_PACKED ) {
3627 yuvpack_prog(bktr, i_flag, cols, rows, interlace);
3628 OUTB(bktr, BKTR_COLOR_CTL, (INB(bktr, BKTR_COLOR_CTL) & 0xf0)
3629 | pixfmt_swap_flags( bktr->pixfmt ));
3630 return;
3631 }
3632
3633 if ( pf_int->public.type == METEOR_PIXTYPE_YUV_12 ) {
3634 yuv12_prog(bktr, i_flag, cols, rows, interlace);
3635 OUTB(bktr, BKTR_COLOR_CTL, (INB(bktr, BKTR_COLOR_CTL) & 0xf0)
3636 | pixfmt_swap_flags( bktr->pixfmt ));
3637 return;
3638 }
3639 return;
3640 }
3641
3642
3643 /******************************************************************************
3644 * video & video capture specific routines:
3645 */
3646
3647
3648 /*
3649 *
3650 */
3651 static void
3652 start_capture( bktr_ptr_t bktr, unsigned type )
3653 {
3654 u_char i_flag;
3655 struct format_params *fp;
3656
3657 fp = &format_params[bktr->format_params];
3658
3659 /* If requested, clear out capture buf first */
3660 if (bktr->clr_on_start && (bktr->video.addr == 0)) {
3661 bzero((caddr_t)bktr->bigbuf,
3662 (size_t)bktr->rows * bktr->cols * bktr->frames *
3663 pixfmt_table[ bktr->pixfmt ].public.Bpp);
3664 }
3665
3666 OUTB(bktr, BKTR_DSTATUS, 0);
3667 OUTL(bktr, BKTR_INT_STAT, INL(bktr, BKTR_INT_STAT));
3668
3669 bktr->flags |= type;
3670 bktr->flags &= ~METEOR_WANT_MASK;
3671 switch(bktr->flags & METEOR_ONLY_FIELDS_MASK) {
3672 case METEOR_ONLY_EVEN_FIELDS:
3673 bktr->flags |= METEOR_WANT_EVEN;
3674 i_flag = 1;
3675 break;
3676 case METEOR_ONLY_ODD_FIELDS:
3677 bktr->flags |= METEOR_WANT_ODD;
3678 i_flag = 2;
3679 break;
3680 default:
3681 bktr->flags |= METEOR_WANT_MASK;
3682 i_flag = 3;
3683 break;
3684 }
3685
3686 /* TDEC is only valid for continuous captures */
3687 if ( type == METEOR_SINGLE ) {
3688 u_short fps_save = bktr->fps;
3689
3690 set_fps(bktr, fp->frame_rate);
3691 bktr->fps = fps_save;
3692 }
3693 else
3694 set_fps(bktr, bktr->fps);
3695
3696 if (bktr->dma_prog_loaded == FALSE) {
3697 build_dma_prog(bktr, i_flag);
3698 bktr->dma_prog_loaded = TRUE;
3699 }
3700
3701
3702 OUTL(bktr, BKTR_RISC_STRT_ADD, vtophys(bktr->dma_prog));
3703
3704 }
3705
3706
3707 /*
3708 *
3709 */
3710 static void
3711 set_fps( bktr_ptr_t bktr, u_short fps )
3712 {
3713 struct format_params *fp;
3714 int i_flag;
3715
3716 fp = &format_params[bktr->format_params];
3717
3718 switch(bktr->flags & METEOR_ONLY_FIELDS_MASK) {
3719 case METEOR_ONLY_EVEN_FIELDS:
3720 bktr->flags |= METEOR_WANT_EVEN;
3721 i_flag = 1;
3722 break;
3723 case METEOR_ONLY_ODD_FIELDS:
3724 bktr->flags |= METEOR_WANT_ODD;
3725 i_flag = 1;
3726 break;
3727 default:
3728 bktr->flags |= METEOR_WANT_MASK;
3729 i_flag = 2;
3730 break;
3731 }
3732
3733 OUTW(bktr, BKTR_GPIO_DMA_CTL, FIFO_RISC_DISABLED);
3734 OUTL(bktr, BKTR_INT_STAT, ALL_INTS_CLEARED);
3735
3736 bktr->fps = fps;
3737 OUTB(bktr, BKTR_TDEC, 0);
3738
3739 if (fps < fp->frame_rate)
3740 OUTB(bktr, BKTR_TDEC, i_flag*(fp->frame_rate - fps) & 0x3f);
3741 else
3742 OUTB(bktr, BKTR_TDEC, 0);
3743 return;
3744
3745 }
3746
3747
3748
3749
3750
3751 /*
3752 * Given a pixfmt index, compute the bt848 swap_flags necessary to
3753 * achieve the specified swapping.
3754 * Note that without bt swapping, 2Bpp and 3Bpp modes are written
3755 * byte-swapped, and 4Bpp modes are byte and word swapped (see Table 6
3756 * and read R->L).
3757 * Note also that for 3Bpp, we may additionally need to do some creative
3758 * SKIPing to align the FIFO bytelines with the target buffer (see split()).
3759 * This is abstracted here: e.g. no swaps = RGBA; byte & short swap = ABGR
3760 * as one would expect.
3761 */
3762
3763 static u_int pixfmt_swap_flags( int pixfmt )
3764 {
3765 struct meteor_pixfmt *pf = &pixfmt_table[ pixfmt ].public;
3766 u_int swapf = 0;
3767
3768 switch ( pf->Bpp ) {
3769 case 2 : swapf = ( pf->swap_bytes ? 0 : BSWAP );
3770 break;
3771
3772 case 3 : /* no swaps supported for 3bpp - makes no sense w/ bt848 */
3773 break;
3774
3775 case 4 : if ( pf->swap_bytes )
3776 swapf = pf->swap_shorts ? 0 : WSWAP;
3777 else
3778 swapf = pf->swap_shorts ? BSWAP : (BSWAP | WSWAP);
3779 break;
3780 }
3781 return swapf;
3782 }
3783
3784
3785
3786 /*
3787 * Converts meteor-defined pixel formats (e.g. METEOR_GEO_RGB16) into
3788 * our pixfmt_table indices.
3789 */
3790
3791 static int oformat_meteor_to_bt( u_long format )
3792 {
3793 int i;
3794 struct meteor_pixfmt *pf1, *pf2;
3795
3796 /* Find format in compatibility table */
3797 for ( i = 0; i < METEOR_PIXFMT_TABLE_SIZE; i++ )
3798 if ( meteor_pixfmt_table[i].meteor_format == format )
3799 break;
3800
3801 if ( i >= METEOR_PIXFMT_TABLE_SIZE )
3802 return -1;
3803 pf1 = &meteor_pixfmt_table[i].public;
3804
3805 /* Match it with an entry in master pixel format table */
3806 for ( i = 0; i < PIXFMT_TABLE_SIZE; i++ ) {
3807 pf2 = &pixfmt_table[i].public;
3808
3809 if (( pf1->type == pf2->type ) &&
3810 ( pf1->Bpp == pf2->Bpp ) &&
3811 !bcmp( pf1->masks, pf2->masks, sizeof( pf1->masks )) &&
3812 ( pf1->swap_bytes == pf2->swap_bytes ) &&
3813 ( pf1->swap_shorts == pf2->swap_shorts ))
3814 break;
3815 }
3816 if ( i >= PIXFMT_TABLE_SIZE )
3817 return -1;
3818
3819 return i;
3820 }
3821
3822 /******************************************************************************
3823 * i2c primitives:
3824 */
3825
3826 /* */
3827 #define I2CBITTIME (0x5<<4) /* 5 * 0.48uS */
3828 #define I2CBITTIME_878 (1 << 7)
3829 #define I2C_READ 0x01
3830 #define I2C_COMMAND (I2CBITTIME | \
3831 BT848_DATA_CTL_I2CSCL | \
3832 BT848_DATA_CTL_I2CSDA)
3833
3834 #define I2C_COMMAND_878 (I2CBITTIME_878 | \
3835 BT848_DATA_CTL_I2CSCL | \
3836 BT848_DATA_CTL_I2CSDA)
3837
3838 /* Select between old i2c code and new iicbus / smbus code */
3839 #if defined(BKTR_USE_FREEBSD_SMBUS)
3840
3841 /*
3842 * The hardware interface is actually SMB commands
3843 */
3844 int
3845 i2cWrite( bktr_ptr_t bktr, int addr, int byte1, int byte2 )
3846 {
3847 char cmd;
3848
3849 if (bktr->id == BROOKTREE_848 ||
3850 bktr->id == BROOKTREE_848A ||
3851 bktr->id == BROOKTREE_849A)
3852 cmd = I2C_COMMAND;
3853 else
3854 cmd = I2C_COMMAND_878;
3855
3856 if (byte2 != -1) {
3857 if (smbus_writew(bktr->i2c_sc.smbus, addr, cmd,
3858 (short)(((byte2 & 0xff) << 8) | (byte1 & 0xff))))
3859 return (-1);
3860 } else {
3861 if (smbus_writeb(bktr->i2c_sc.smbus, addr, cmd,
3862 (char)(byte1 & 0xff)))
3863 return (-1);
3864 }
3865
3866 /* return OK */
3867 return( 0 );
3868 }
3869
3870 int
3871 i2cRead( bktr_ptr_t bktr, int addr )
3872 {
3873 char result;
3874 char cmd;
3875
3876 if (bktr->id == BROOKTREE_848 ||
3877 bktr->id == BROOKTREE_848A ||
3878 bktr->id == BROOKTREE_849A)
3879 cmd = I2C_COMMAND;
3880 else
3881 cmd = I2C_COMMAND_878;
3882
3883 if (smbus_readb(bktr->i2c_sc.smbus, addr, cmd, &result))
3884 return (-1);
3885
3886 return ((int)((unsigned char)result));
3887 }
3888
3889 #define IICBUS(bktr) ((bktr)->i2c_sc.iicbb)
3890
3891 /* The MSP34xx and DPL35xx Audio chip require i2c bus writes of up */
3892 /* to 5 bytes which the bt848 automated i2c bus controller cannot handle */
3893 /* Therefore we need low level control of the i2c bus hardware */
3894
3895 /* Write to the MSP or DPL registers */
3896 void
3897 msp_dpl_write(bktr_ptr_t bktr, int i2c_addr, unsigned char dev, unsigned int addr, unsigned int data)
3898 {
3899 unsigned char addr_l, addr_h, data_h, data_l ;
3900
3901 addr_h = (addr >>8) & 0xff;
3902 addr_l = addr & 0xff;
3903 data_h = (data >>8) & 0xff;
3904 data_l = data & 0xff;
3905
3906 iicbus_start(IICBUS(bktr), i2c_addr, 0 /* no timeout? */);
3907
3908 iicbus_write_byte(IICBUS(bktr), dev, 0);
3909 iicbus_write_byte(IICBUS(bktr), addr_h, 0);
3910 iicbus_write_byte(IICBUS(bktr), addr_l, 0);
3911 iicbus_write_byte(IICBUS(bktr), data_h, 0);
3912 iicbus_write_byte(IICBUS(bktr), data_l, 0);
3913
3914 iicbus_stop(IICBUS(bktr));
3915
3916 return;
3917 }
3918
3919 /* Read from the MSP or DPL registers */
3920 unsigned int
3921 msp_dpl_read(bktr_ptr_t bktr, int i2c_addr, unsigned char dev, unsigned int addr)
3922 {
3923 unsigned int data;
3924 unsigned char addr_l, addr_h, dev_r;
3925 int read;
3926 u_char data_read[2];
3927
3928 addr_h = (addr >>8) & 0xff;
3929 addr_l = addr & 0xff;
3930 dev_r = dev+1;
3931
3932 /* XXX errors ignored */
3933 iicbus_start(IICBUS(bktr), i2c_addr, 0 /* no timeout? */);
3934
3935 iicbus_write_byte(IICBUS(bktr), dev_r, 0);
3936 iicbus_write_byte(IICBUS(bktr), addr_h, 0);
3937 iicbus_write_byte(IICBUS(bktr), addr_l, 0);
3938
3939 iicbus_repeated_start(IICBUS(bktr), i2c_addr +1, 0 /* no timeout? */);
3940 iicbus_read(IICBUS(bktr), data_read, 2, &read, IIC_LAST_READ, 0);
3941 iicbus_stop(IICBUS(bktr));
3942
3943 data = (data_read[0]<<8) | data_read[1];
3944
3945 return (data);
3946 }
3947
3948 /* Reset the MSP or DPL chip */
3949 /* The user can block the reset (which is handy if you initialise the
3950 * MSP and/or DPL audio in another operating system first (eg in Windows)
3951 */
3952 void
3953 msp_dpl_reset( bktr_ptr_t bktr, int i2c_addr )
3954 {
3955
3956 #ifndef BKTR_NO_MSP_RESET
3957 /* put into reset mode */
3958 iicbus_start(IICBUS(bktr), i2c_addr, 0 /* no timeout? */);
3959 iicbus_write_byte(IICBUS(bktr), 0x00, 0);
3960 iicbus_write_byte(IICBUS(bktr), 0x80, 0);
3961 iicbus_write_byte(IICBUS(bktr), 0x00, 0);
3962 iicbus_stop(IICBUS(bktr));
3963
3964 /* put back to operational mode */
3965 iicbus_start(IICBUS(bktr), i2c_addr, 0 /* no timeout? */);
3966 iicbus_write_byte(IICBUS(bktr), 0x00, 0);
3967 iicbus_write_byte(IICBUS(bktr), 0x00, 0);
3968 iicbus_write_byte(IICBUS(bktr), 0x00, 0);
3969 iicbus_stop(IICBUS(bktr));
3970 #endif
3971 return;
3972 }
3973
3974 static void remote_read(bktr_ptr_t bktr, struct bktr_remote *remote) {
3975 int read;
3976
3977 /* XXX errors ignored */
3978 iicbus_start(IICBUS(bktr), bktr->remote_control_addr, 0 /* no timeout? */);
3979 iicbus_read(IICBUS(bktr), remote->data, 3, &read, IIC_LAST_READ, 0);
3980 iicbus_stop(IICBUS(bktr));
3981
3982 return;
3983 }
3984
3985 #else /* defined(BKTR_USE_FREEBSD_SMBUS) */
3986
3987 /*
3988 * Program the i2c bus directly
3989 */
3990 int
3991 i2cWrite( bktr_ptr_t bktr, int addr, int byte1, int byte2 )
3992 {
3993 u_long x;
3994 u_long data;
3995
3996 /* clear status bits */
3997 OUTL(bktr, BKTR_INT_STAT, BT848_INT_RACK | BT848_INT_I2CDONE);
3998
3999 /* build the command datum */
4000 if (bktr->id == BROOKTREE_848 ||
4001 bktr->id == BROOKTREE_848A ||
4002 bktr->id == BROOKTREE_849A) {
4003 data = ((addr & 0xff) << 24) | ((byte1 & 0xff) << 16) | I2C_COMMAND;
4004 } else {
4005 data = ((addr & 0xff) << 24) | ((byte1 & 0xff) << 16) | I2C_COMMAND_878;
4006 }
4007 if ( byte2 != -1 ) {
4008 data |= ((byte2 & 0xff) << 8);
4009 data |= BT848_DATA_CTL_I2CW3B;
4010 }
4011
4012 /* write the address and data */
4013 OUTL(bktr, BKTR_I2C_DATA_CTL, data);
4014
4015 /* wait for completion */
4016 for ( x = 0x7fffffff; x; --x ) { /* safety valve */
4017 if ( INL(bktr, BKTR_INT_STAT) & BT848_INT_I2CDONE )
4018 break;
4019 }
4020
4021 /* check for ACK */
4022 if ( !x || !(INL(bktr, BKTR_INT_STAT) & BT848_INT_RACK) )
4023 return( -1 );
4024
4025 /* return OK */
4026 return( 0 );
4027 }
4028
4029
4030 /*
4031 *
4032 */
4033 int
4034 i2cRead( bktr_ptr_t bktr, int addr )
4035 {
4036 u_long x;
4037
4038 /* clear status bits */
4039 OUTL(bktr, BKTR_INT_STAT, BT848_INT_RACK | BT848_INT_I2CDONE);
4040
4041 /* write the READ address */
4042 /* The Bt878 and Bt879 differed on the treatment of i2c commands */
4043
4044 if (bktr->id == BROOKTREE_848 ||
4045 bktr->id == BROOKTREE_848A ||
4046 bktr->id == BROOKTREE_849A) {
4047 OUTL(bktr, BKTR_I2C_DATA_CTL, ((addr & 0xff) << 24) | I2C_COMMAND);
4048 } else {
4049 OUTL(bktr, BKTR_I2C_DATA_CTL, ((addr & 0xff) << 24) | I2C_COMMAND_878);
4050 }
4051
4052 /* wait for completion */
4053 for ( x = 0x7fffffff; x; --x ) { /* safety valve */
4054 if ( INL(bktr, BKTR_INT_STAT) & BT848_INT_I2CDONE )
4055 break;
4056 }
4057
4058 /* check for ACK */
4059 if ( !x || !(INL(bktr, BKTR_INT_STAT) & BT848_INT_RACK) )
4060 return( -1 );
4061
4062 /* it was a read */
4063 return( (INL(bktr, BKTR_I2C_DATA_CTL) >> 8) & 0xff );
4064 }
4065
4066 /* The MSP34xx Audio chip require i2c bus writes of up to 5 bytes which the */
4067 /* bt848 automated i2c bus controller cannot handle */
4068 /* Therefore we need low level control of the i2c bus hardware */
4069 /* Idea for the following functions are from elsewhere in this driver and */
4070 /* from the Linux BTTV i2c driver by Gerd Knorr <kraxel@cs.tu-berlin.de> */
4071
4072 #define BITD 40
4073 static void i2c_start( bktr_ptr_t bktr) {
4074 OUTL(bktr, BKTR_I2C_DATA_CTL, 1); DELAY( BITD ); /* release data */
4075 OUTL(bktr, BKTR_I2C_DATA_CTL, 3); DELAY( BITD ); /* release clock */
4076 OUTL(bktr, BKTR_I2C_DATA_CTL, 2); DELAY( BITD ); /* lower data */
4077 OUTL(bktr, BKTR_I2C_DATA_CTL, 0); DELAY( BITD ); /* lower clock */
4078 }
4079
4080 static void i2c_stop( bktr_ptr_t bktr) {
4081 OUTL(bktr, BKTR_I2C_DATA_CTL, 0); DELAY( BITD ); /* lower clock & data */
4082 OUTL(bktr, BKTR_I2C_DATA_CTL, 2); DELAY( BITD ); /* release clock */
4083 OUTL(bktr, BKTR_I2C_DATA_CTL, 3); DELAY( BITD ); /* release data */
4084 }
4085
4086 static int i2c_write_byte( bktr_ptr_t bktr, unsigned char data) {
4087 int x;
4088 int status;
4089
4090 /* write out the byte */
4091 for ( x = 7; x >= 0; --x ) {
4092 if ( data & (1<<x) ) {
4093 OUTL(bktr, BKTR_I2C_DATA_CTL, 1);
4094 DELAY( BITD ); /* assert HI data */
4095 OUTL(bktr, BKTR_I2C_DATA_CTL, 3);
4096 DELAY( BITD ); /* strobe clock */
4097 OUTL(bktr, BKTR_I2C_DATA_CTL, 1);
4098 DELAY( BITD ); /* release clock */
4099 }
4100 else {
4101 OUTL(bktr, BKTR_I2C_DATA_CTL, 0);
4102 DELAY( BITD ); /* assert LO data */
4103 OUTL(bktr, BKTR_I2C_DATA_CTL, 2);
4104 DELAY( BITD ); /* strobe clock */
4105 OUTL(bktr, BKTR_I2C_DATA_CTL, 0);
4106 DELAY( BITD ); /* release clock */
4107 }
4108 }
4109
4110 /* look for an ACK */
4111 OUTL(bktr, BKTR_I2C_DATA_CTL, 1); DELAY( BITD ); /* float data */
4112 OUTL(bktr, BKTR_I2C_DATA_CTL, 3); DELAY( BITD ); /* strobe clock */
4113 status = INL(bktr, BKTR_I2C_DATA_CTL) & 1; /* read the ACK bit */
4114 OUTL(bktr, BKTR_I2C_DATA_CTL, 1); DELAY( BITD ); /* release clock */
4115
4116 return( status );
4117 }
4118
4119 static int i2c_read_byte( bktr_ptr_t bktr, unsigned char *data, int last ) {
4120 int x;
4121 int bit;
4122 int byte = 0;
4123
4124 /* read in the byte */
4125 OUTL(bktr, BKTR_I2C_DATA_CTL, 1);
4126 DELAY( BITD ); /* float data */
4127 for ( x = 7; x >= 0; --x ) {
4128 OUTL(bktr, BKTR_I2C_DATA_CTL, 3);
4129 DELAY( BITD ); /* strobe clock */
4130 bit = INL(bktr, BKTR_I2C_DATA_CTL) & 1; /* read the data bit */
4131 if ( bit ) byte |= (1<<x);
4132 OUTL(bktr, BKTR_I2C_DATA_CTL, 1);
4133 DELAY( BITD ); /* release clock */
4134 }
4135 /* After reading the byte, send an ACK */
4136 /* (unless that was the last byte, for which we send a NAK */
4137 if (last) { /* send NAK - same a writing a 1 */
4138 OUTL(bktr, BKTR_I2C_DATA_CTL, 1);
4139 DELAY( BITD ); /* set data bit */
4140 OUTL(bktr, BKTR_I2C_DATA_CTL, 3);
4141 DELAY( BITD ); /* strobe clock */
4142 OUTL(bktr, BKTR_I2C_DATA_CTL, 1);
4143 DELAY( BITD ); /* release clock */
4144 } else { /* send ACK - same as writing a 0 */
4145 OUTL(bktr, BKTR_I2C_DATA_CTL, 0);
4146 DELAY( BITD ); /* set data bit */
4147 OUTL(bktr, BKTR_I2C_DATA_CTL, 2);
4148 DELAY( BITD ); /* strobe clock */
4149 OUTL(bktr, BKTR_I2C_DATA_CTL, 0);
4150 DELAY( BITD ); /* release clock */
4151 }
4152
4153 *data=byte;
4154 return 0;
4155 }
4156 #undef BITD
4157
4158 /* Write to the MSP or DPL registers */
4159 void msp_dpl_write( bktr_ptr_t bktr, int i2c_addr, unsigned char dev, unsigned int addr,
4160 unsigned int data){
4161 unsigned int msp_w_addr = i2c_addr;
4162 unsigned char addr_l, addr_h, data_h, data_l ;
4163 addr_h = (addr >>8) & 0xff;
4164 addr_l = addr & 0xff;
4165 data_h = (data >>8) & 0xff;
4166 data_l = data & 0xff;
4167
4168 i2c_start(bktr);
4169 i2c_write_byte(bktr, msp_w_addr);
4170 i2c_write_byte(bktr, dev);
4171 i2c_write_byte(bktr, addr_h);
4172 i2c_write_byte(bktr, addr_l);
4173 i2c_write_byte(bktr, data_h);
4174 i2c_write_byte(bktr, data_l);
4175 i2c_stop(bktr);
4176 }
4177
4178 /* Read from the MSP or DPL registers */
4179 unsigned int msp_dpl_read(bktr_ptr_t bktr, int i2c_addr, unsigned char dev, unsigned int addr){
4180 unsigned int data;
4181 unsigned char addr_l, addr_h, data_1, data_2, dev_r ;
4182 addr_h = (addr >>8) & 0xff;
4183 addr_l = addr & 0xff;
4184 dev_r = dev+1;
4185
4186 i2c_start(bktr);
4187 i2c_write_byte(bktr,i2c_addr);
4188 i2c_write_byte(bktr,dev_r);
4189 i2c_write_byte(bktr,addr_h);
4190 i2c_write_byte(bktr,addr_l);
4191
4192 i2c_start(bktr);
4193 i2c_write_byte(bktr,i2c_addr+1);
4194 i2c_read_byte(bktr,&data_1, 0);
4195 i2c_read_byte(bktr,&data_2, 1);
4196 i2c_stop(bktr);
4197 data = (data_1<<8) | data_2;
4198 return data;
4199 }
4200
4201 /* Reset the MSP or DPL chip */
4202 /* The user can block the reset (which is handy if you initialise the
4203 * MSP audio in another operating system first (eg in Windows)
4204 */
4205 void msp_dpl_reset( bktr_ptr_t bktr, int i2c_addr ) {
4206
4207 #ifndef BKTR_NO_MSP_RESET
4208 /* put into reset mode */
4209 i2c_start(bktr);
4210 i2c_write_byte(bktr, i2c_addr);
4211 i2c_write_byte(bktr, 0x00);
4212 i2c_write_byte(bktr, 0x80);
4213 i2c_write_byte(bktr, 0x00);
4214 i2c_stop(bktr);
4215
4216 /* put back to operational mode */
4217 i2c_start(bktr);
4218 i2c_write_byte(bktr, i2c_addr);
4219 i2c_write_byte(bktr, 0x00);
4220 i2c_write_byte(bktr, 0x00);
4221 i2c_write_byte(bktr, 0x00);
4222 i2c_stop(bktr);
4223 #endif
4224 return;
4225
4226 }
4227
4228 static void remote_read(bktr_ptr_t bktr, struct bktr_remote *remote) {
4229
4230 /* XXX errors ignored */
4231 i2c_start(bktr);
4232 i2c_write_byte(bktr,bktr->remote_control_addr);
4233 i2c_read_byte(bktr,&(remote->data[0]), 0);
4234 i2c_read_byte(bktr,&(remote->data[1]), 0);
4235 i2c_read_byte(bktr,&(remote->data[2]), 0);
4236 i2c_stop(bktr);
4237
4238 return;
4239 }
4240
4241 #endif /* defined(BKTR_USE_FREEBSD_SMBUS) */
4242
4243
4244 #if defined( I2C_SOFTWARE_PROBE )
4245
4246 /*
4247 * we are keeping this around for any parts that we need to probe
4248 * but that CANNOT be probed via an i2c read.
4249 * this is necessary because the hardware i2c mechanism
4250 * cannot be programmed for 1 byte writes.
4251 * currently there are no known i2c parts that we need to probe
4252 * and that cannot be safely read.
4253 */
4254 static int i2cProbe( bktr_ptr_t bktr, int addr );
4255 #define BITD 40
4256 #define EXTRA_START
4257
4258 /*
4259 * probe for an I2C device at addr.
4260 */
4261 static int
4262 i2cProbe( bktr_ptr_t bktr, int addr )
4263 {
4264 int x, status;
4265
4266 /* the START */
4267 #if defined( EXTRA_START )
4268 OUTL(bktr, BKTR_I2C_DATA_CTL, 1); DELAY( BITD ); /* release data */
4269 OUTL(bktr, BKTR_I2C_DATA_CTL, 3); DELAY( BITD ); /* release clock */
4270 #endif /* EXTRA_START */
4271 OUTL(bktr, BKTR_I2C_DATA_CTL, 2); DELAY( BITD ); /* lower data */
4272 OUTL(bktr, BKTR_I2C_DATA_CTL, 0); DELAY( BITD ); /* lower clock */
4273
4274 /* write addr */
4275 for ( x = 7; x >= 0; --x ) {
4276 if ( addr & (1<<x) ) {
4277 OUTL(bktr, BKTR_I2C_DATA_CTL, 1);
4278 DELAY( BITD ); /* assert HI data */
4279 OUTL(bktr, BKTR_I2C_DATA_CTL, 3);
4280 DELAY( BITD ); /* strobe clock */
4281 OUTL(bktr, BKTR_I2C_DATA_CTL, 1);
4282 DELAY( BITD ); /* release clock */
4283 }
4284 else {
4285 OUTL(bktr, BKTR_I2C_DATA_CTL, 0);
4286 DELAY( BITD ); /* assert LO data */
4287 OUTL(bktr, BKTR_I2C_DATA_CTL, 2);
4288 DELAY( BITD ); /* strobe clock */
4289 OUTL(bktr, BKTR_I2C_DATA_CTL, 0);
4290 DELAY( BITD ); /* release clock */
4291 }
4292 }
4293
4294 /* look for an ACK */
4295 OUTL(bktr, BKTR_I2C_DATA_CTL, 1); DELAY( BITD ); /* float data */
4296 OUTL(bktr, BKTR_I2C_DATA_CTL, 3); DELAY( BITD ); /* strobe clock */
4297 status = INL(bktr, BKTR_I2C_DATA_CTL) & 1; /* read the ACK bit */
4298 OUTL(bktr, BKTR_I2C_DATA_CTL, 1); DELAY( BITD ); /* release clock */
4299
4300 /* the STOP */
4301 OUTL(bktr, BKTR_I2C_DATA_CTL, 0); DELAY( BITD ); /* lower clock & data */
4302 OUTL(bktr, BKTR_I2C_DATA_CTL, 2); DELAY( BITD ); /* release clock */
4303 OUTL(bktr, BKTR_I2C_DATA_CTL, 3); DELAY( BITD ); /* release data */
4304
4305 return( status );
4306 }
4307 #undef EXTRA_START
4308 #undef BITD
4309
4310 #endif /* I2C_SOFTWARE_PROBE */
4311
4312
4313 #define ABSENT (-1)
4314
4315 #endif /* FreeBSD, BSDI, NetBSD, OpenBSD */
4316
Cache object: a6910d75a49a2e53e9a76edbac6d2d53
|