1 /*
2 * Product specific probe and attach routines for:
3 * Buslogic BT74x SCSI controllers
4 *
5 * Copyright (c) 1995, 1998, 1999 Justin T. Gibbs
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice immediately at the beginning of the file, without modification,
13 * this list of conditions, and the following disclaimer.
14 * 2. The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
21 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 * SUCH DAMAGE.
28 *
29 */
30
31 #include <sys/cdefs.h>
32 __FBSDID("$FreeBSD: releng/5.2/sys/dev/buslogic/bt_eisa.c 119418 2003-08-24 17:55:58Z obrien $");
33
34 #include <sys/param.h>
35 #include <sys/systm.h>
36 #include <sys/kernel.h>
37 #include <sys/module.h>
38 #include <sys/lock.h>
39 #include <sys/mutex.h>
40 #include <sys/bus.h>
41
42 #include <machine/bus_pio.h>
43 #include <machine/bus.h>
44 #include <machine/resource.h>
45 #include <sys/rman.h>
46
47 #include <dev/eisa/eisaconf.h>
48
49 #include <dev/buslogic/btreg.h>
50
51 #define EISA_DEVICE_ID_BUSLOGIC_74X_B 0x0ab34201
52 #define EISA_DEVICE_ID_BUSLOGIC_74X_C 0x0ab34202
53 #define EISA_DEVICE_ID_SDC3222B 0x0ab34281
54 #define EISA_DEVICE_ID_SDC3222F 0x0ab34781
55 #define EISA_DEVICE_ID_SDC3222WS 0x0ab34981
56 #define EISA_DEVICE_ID_SDC3222WB 0x0ab34982
57 #define EISA_DEVICE_ID_AMI_4801 0x05a94801
58
59 #define BT_IOSIZE 0x04 /* Move to central header */
60 #define BT_EISA_IOSIZE 0x100
61 #define BT_EISA_SLOT_OFFSET 0xc00
62
63 #define EISA_IOCONF 0x08C
64 #define PORTADDR 0x07
65 #define PORT_330 0x00
66 #define PORT_334 0x01
67 #define PORT_230 0x02
68 #define PORT_234 0x03
69 #define PORT_130 0x04
70 #define PORT_134 0x05
71 #define IRQ_CHANNEL 0xe0
72 #define INT_11 0x40
73 #define INT_10 0x20
74 #define INT_15 0xa0
75 #define INT_12 0x60
76 #define INT_14 0x80
77 #define INT_9 0x00
78
79 #define EISA_IRQ_TYPE 0x08D
80 #define LEVEL 0x40
81
82 /* Definitions for the AMI Series 48 controler */
83 #define AMI_EISA_IOSIZE 0x500 /* Two separate ranges?? */
84 #define AMI_EISA_SLOT_OFFSET 0x800
85 #define AMI_EISA_IOCONF 0x000
86 #define AMI_DMA_CHANNEL 0x03
87 #define AMI_IRQ_CHANNEL 0x1c
88 #define AMI_INT_15 0x14
89 #define AMI_INT_14 0x10
90 #define AMI_INT_12 0x0c
91 #define AMI_INT_11 0x00
92 #define AMI_INT_10 0x08
93 #define AMI_INT_9 0x04
94 #define AMI_BIOS_ADDR 0xe0
95
96 #define AMI_EISA_IOCONF1 0x001
97 #define AMI_PORTADDR 0x0e
98 #define AMI_PORT_334 0x08
99 #define AMI_PORT_330 0x00
100 #define AMI_PORT_234 0x0c
101 #define AMI_PORT_230 0x04
102 #define AMI_PORT_134 0x0a
103 #define AMI_PORT_130 0x02
104 #define AMI_IRQ_LEVEL 0x01
105
106
107 #define AMI_MISC2_OPTIONS 0x49E
108 #define AMI_ENABLE_ISA_DMA 0x08
109
110 static const char *bt_match(eisa_id_t type);
111
112 static int
113 bt_eisa_alloc_resources(device_t dev)
114 {
115 struct bt_softc *bt = device_get_softc(dev);
116 int rid;
117 struct resource *port;
118 struct resource *irq;
119 int shared;
120
121 /*
122 * XXX assumes that the iospace ranges are sorted in increasing
123 * order.
124 */
125 rid = 0;
126 port = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid,
127 0, ~0, 1, RF_ACTIVE);
128 if (!port)
129 return (ENOMEM);
130
131 bt_init_softc(dev, port, 0, 0);
132
133 if (eisa_get_irq(dev) != -1) {
134 shared = bt->level_trigger_ints ? RF_SHAREABLE : 0;
135 rid = 0;
136 irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid,
137 0, ~0, 1, shared | RF_ACTIVE);
138 if (!irq) {
139 if (port)
140 bus_release_resource(dev, SYS_RES_IOPORT,
141 0, port);
142 return (ENOMEM);
143 }
144 } else
145 irq = 0;
146 bt->irq = irq;
147
148 return (0);
149 }
150
151 static void
152 bt_eisa_release_resources(device_t dev)
153 {
154 struct bt_softc *bt = device_get_softc(dev);
155
156 if (bt->port)
157 bus_release_resource(dev, SYS_RES_IOPORT, 0, bt->port);
158 if (bt->irq)
159 bus_release_resource(dev, SYS_RES_IRQ, 0, bt->irq);
160 bt_free_softc(dev);
161 }
162
163 static const char*
164 bt_match(eisa_id_t type)
165 {
166 switch(type) {
167 case EISA_DEVICE_ID_BUSLOGIC_74X_B:
168 return ("Buslogic 74xB SCSI host adapter");
169 case EISA_DEVICE_ID_BUSLOGIC_74X_C:
170 return ("Buslogic 74xC SCSI host adapter");
171 case EISA_DEVICE_ID_SDC3222B:
172 return ("Storage Dimensions SDC3222B SCSI host adapter");
173 case EISA_DEVICE_ID_SDC3222F:
174 return ("Storage Dimensions SDC3222F SCSI host adapter");
175 case EISA_DEVICE_ID_SDC3222WS:
176 return ("Storage Dimensions SDC3222WS SCSI host adapter");
177 case EISA_DEVICE_ID_SDC3222WB:
178 return ("Storage Dimensions SDC3222WB SCSI host adapter");
179 case EISA_DEVICE_ID_AMI_4801:
180 return ("AMI Series 48 SCSI host adapter");
181 default:
182 break;
183 }
184 return (NULL);
185 }
186
187 static int
188 bt_eisa_probe(device_t dev)
189 {
190 const char *desc;
191 u_long iobase;
192 struct bt_probe_info info;
193 u_long port;
194 u_long iosize;
195 u_int ioconf;
196 int result;
197 int shared;
198
199 desc = bt_match(eisa_get_id(dev));
200 if (!desc)
201 return (ENXIO);
202 device_set_desc(dev, desc);
203
204 iobase = (eisa_get_slot(dev) * EISA_SLOT_SIZE);
205 if (eisa_get_id(dev) == EISA_DEVICE_ID_AMI_4801) {
206 u_int ioconf1;
207
208 iobase += AMI_EISA_SLOT_OFFSET;
209 iosize = AMI_EISA_IOSIZE;
210 ioconf1 = inb(iobase + AMI_EISA_IOCONF1);
211 /* Determine "ISA" I/O port */
212 switch (ioconf1 & AMI_PORTADDR) {
213 case AMI_PORT_330:
214 port = 0x330;
215 break;
216 case AMI_PORT_334:
217 port = 0x334;
218 break;
219 case AMI_PORT_230:
220 port = 0x230;
221 break;
222 case AMI_PORT_234:
223 port = 0x234;
224 break;
225 case AMI_PORT_134:
226 port = 0x134;
227 break;
228 case AMI_PORT_130:
229 port = 0x130;
230 break;
231 default:
232 /* Disabled */
233 printf("bt: AMI EISA Adapter at "
234 "slot %d has a disabled I/O "
235 "port. Cannot attach.\n",
236 eisa_get_slot(dev));
237 return (ENXIO);
238 }
239 shared = (inb(iobase + AMI_EISA_IOCONF1) & AMI_IRQ_LEVEL) ?
240 EISA_TRIGGER_LEVEL : EISA_TRIGGER_EDGE;
241 } else {
242 iobase += BT_EISA_SLOT_OFFSET;
243 iosize = BT_EISA_IOSIZE;
244
245 ioconf = inb(iobase + EISA_IOCONF);
246 /* Determine "ISA" I/O port */
247 switch (ioconf & PORTADDR) {
248 case PORT_330:
249 port = 0x330;
250 break;
251 case PORT_334:
252 port = 0x334;
253 break;
254 case PORT_230:
255 port = 0x230;
256 break;
257 case PORT_234:
258 port = 0x234;
259 break;
260 case PORT_130:
261 port = 0x130;
262 break;
263 case PORT_134:
264 port = 0x134;
265 break;
266 default:
267 /* Disabled */
268 printf("bt: Buslogic EISA Adapter at "
269 "slot %d has a disabled I/O "
270 "port. Cannot attach.\n",
271 eisa_get_slot(dev));
272 return (ENXIO);
273 }
274 shared = (inb(iobase + EISA_IRQ_TYPE) & LEVEL) ?
275 EISA_TRIGGER_LEVEL : EISA_TRIGGER_EDGE;
276 }
277 bt_mark_probed_iop(port);
278
279 /* Tell parent where our resources are going to be */
280 eisa_add_iospace(dev, iobase, iosize, RESVADDR_NONE);
281 eisa_add_iospace(dev, port, BT_IOSIZE, RESVADDR_NONE);
282
283 /* And allocate them */
284 bt_eisa_alloc_resources(dev);
285
286 if (bt_port_probe(dev, &info) != 0) {
287 printf("bt_eisa_probe: Probe failed for "
288 "card at slot 0x%x\n", eisa_get_slot(dev));
289 result = ENXIO;
290 } else {
291 eisa_add_intr(dev, info.irq, shared);
292 result = 0;
293 }
294 bt_eisa_release_resources(dev);
295
296 return (result);
297 }
298
299 static int
300 bt_eisa_attach(device_t dev)
301 {
302 struct bt_softc *bt = device_get_softc(dev);
303
304 /* Allocate resources */
305 bt_eisa_alloc_resources(dev);
306
307 /* Allocate a dmatag for our SCB DMA maps */
308 /* XXX Should be a child of the PCI bus dma tag */
309 if (bus_dma_tag_create( /* parent */ NULL,
310 /* alignment */ 1,
311 /* boundary */ 0,
312 /* lowaddr */ BUS_SPACE_MAXADDR_32BIT,
313 /* highaddr */ BUS_SPACE_MAXADDR,
314 /* filter */ NULL,
315 /* filterarg */ NULL,
316 /* maxsize */ BUS_SPACE_MAXSIZE_32BIT,
317 /* nsegments */ ~0,
318 /* maxsegsz */ BUS_SPACE_MAXSIZE_32BIT,
319 /* flags */ 0,
320 /* lockfunc */ busdma_lock_mutex,
321 /* lockarg, */ &Giant,
322 &bt->parent_dmat) != 0) {
323 bt_eisa_release_resources(dev);
324 return -1;
325 }
326
327 /*
328 * Now that we know we own the resources we need, do the full
329 * card initialization.
330 */
331 if (bt_probe(dev) || bt_fetch_adapter_info(dev) || bt_init(dev)) {
332 bt_eisa_release_resources(dev);
333 return -1;
334 }
335
336 /* Attach sub-devices - always succeeds (sets up intr) */
337 bt_attach(dev);
338
339 return 0;
340 }
341
342 static device_method_t bt_eisa_methods[] = {
343 /* Device interface */
344 DEVMETHOD(device_probe, bt_eisa_probe),
345 DEVMETHOD(device_attach, bt_eisa_attach),
346
347 { 0, 0 }
348 };
349
350 static driver_t bt_eisa_driver = {
351 "bt",
352 bt_eisa_methods,
353 sizeof(struct bt_softc),
354 };
355
356 static devclass_t bt_devclass;
357
358 DRIVER_MODULE(bt, eisa, bt_eisa_driver, bt_devclass, 0, 0);
Cache object: f7b267e77cb1c37f4db50fe046882dfe
|