The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/dev/bwi/bwirf.c

Version: -  FREEBSD  -  FREEBSD-13-STABLE  -  FREEBSD-13-0  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  l41  -  OPENBSD  -  linux-2.6  -  MK84  -  PLAN9  -  xnu-8792 
SearchContext: -  none  -  3  -  10 

    1 /*
    2  * Copyright (c) 2007 The DragonFly Project.  All rights reserved.
    3  * 
    4  * This code is derived from software contributed to The DragonFly Project
    5  * by Sepherosa Ziehau <sepherosa@gmail.com>
    6  * 
    7  * Redistribution and use in source and binary forms, with or without
    8  * modification, are permitted provided that the following conditions
    9  * are met:
   10  * 
   11  * 1. Redistributions of source code must retain the above copyright
   12  *    notice, this list of conditions and the following disclaimer.
   13  * 2. Redistributions in binary form must reproduce the above copyright
   14  *    notice, this list of conditions and the following disclaimer in
   15  *    the documentation and/or other materials provided with the
   16  *    distribution.
   17  * 3. Neither the name of The DragonFly Project nor the names of its
   18  *    contributors may be used to endorse or promote products derived
   19  *    from this software without specific, prior written permission.
   20  * 
   21  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
   22  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
   23  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
   24  * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
   25  * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
   26  * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
   27  * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
   28  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
   29  * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
   30  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
   31  * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
   32  * SUCH DAMAGE.
   33  * 
   34  * $DragonFly: src/sys/dev/netif/bwi/bwirf.c,v 1.9 2008/08/21 12:19:33 swildner Exp $
   35  */
   36 
   37 #include <sys/cdefs.h>
   38 __FBSDID("$FreeBSD: releng/11.2/sys/dev/bwi/bwirf.c 331722 2018-03-29 02:50:57Z eadler $");
   39 
   40 #include "opt_inet.h"
   41 #include "opt_bwi.h"
   42 #include "opt_wlan.h"
   43 
   44 #include <sys/param.h>
   45 #include <sys/endian.h>
   46 #include <sys/kernel.h>
   47 #include <sys/bus.h>
   48 #include <sys/malloc.h>
   49 #include <sys/proc.h>
   50 #include <sys/rman.h>
   51 #include <sys/socket.h>
   52 #include <sys/sockio.h>
   53 #include <sys/sysctl.h>
   54 #include <sys/systm.h>
   55  
   56 #include <net/if.h>
   57 #include <net/if_var.h>
   58 #include <net/if_dl.h>
   59 #include <net/if_media.h>
   60 #include <net/if_types.h>
   61 #include <net/if_arp.h>
   62 #include <net/ethernet.h>
   63 #include <net/if_llc.h>
   64 
   65 #include <net80211/ieee80211_var.h>
   66 #include <net80211/ieee80211_radiotap.h>
   67 #include <net80211/ieee80211_amrr.h>
   68 
   69 #include <machine/bus.h>
   70 
   71 #include <dev/bwi/bitops.h>
   72 #include <dev/bwi/if_bwireg.h>
   73 #include <dev/bwi/if_bwivar.h>
   74 #include <dev/bwi/bwimac.h>
   75 #include <dev/bwi/bwirf.h>
   76 #include <dev/bwi/bwiphy.h>
   77 
   78 #define RF_LO_WRITE(mac, lo)    bwi_rf_lo_write((mac), (lo))
   79 
   80 #define BWI_RF_2GHZ_CHAN(chan)                  \
   81         (ieee80211_ieee2mhz((chan), IEEE80211_CHAN_2GHZ) - 2400)
   82 
   83 #define BWI_DEFAULT_IDLE_TSSI   52
   84 
   85 struct rf_saveregs {
   86         uint16_t        phy_01;
   87         uint16_t        phy_03;
   88         uint16_t        phy_0a;
   89         uint16_t        phy_15;
   90         uint16_t        phy_2a;
   91         uint16_t        phy_30;
   92         uint16_t        phy_35;
   93         uint16_t        phy_60;
   94         uint16_t        phy_429;
   95         uint16_t        phy_802;
   96         uint16_t        phy_811;
   97         uint16_t        phy_812;
   98         uint16_t        phy_814;
   99         uint16_t        phy_815;
  100 
  101         uint16_t        rf_43;
  102         uint16_t        rf_52;
  103         uint16_t        rf_7a;
  104 };
  105 
  106 #define SAVE_RF_REG(mac, regs, n)       (regs)->rf_##n = RF_READ((mac), 0x##n)
  107 #define RESTORE_RF_REG(mac, regs, n)    RF_WRITE((mac), 0x##n, (regs)->rf_##n)
  108 
  109 #define SAVE_PHY_REG(mac, regs, n)      (regs)->phy_##n = PHY_READ((mac), 0x##n)
  110 #define RESTORE_PHY_REG(mac, regs, n)   PHY_WRITE((mac), 0x##n, (regs)->phy_##n)
  111 
  112 static int      bwi_rf_calc_txpower(int8_t *, uint8_t, const int16_t[]);
  113 static void     bwi_rf_work_around(struct bwi_mac *, u_int);
  114 static int      bwi_rf_gain_max_reached(struct bwi_mac *, int);
  115 static uint16_t bwi_rf_calibval(struct bwi_mac *);
  116 static uint16_t bwi_rf_get_tp_ctrl2(struct bwi_mac *);
  117 
  118 static void     bwi_rf_lo_update_11b(struct bwi_mac *);
  119 static uint16_t bwi_rf_lo_measure_11b(struct bwi_mac *);
  120 
  121 static void     bwi_rf_lo_update_11g(struct bwi_mac *);
  122 static uint32_t bwi_rf_lo_devi_measure(struct bwi_mac *, uint16_t);
  123 static void     bwi_rf_lo_measure_11g(struct bwi_mac *,
  124                         const struct bwi_rf_lo *, struct bwi_rf_lo *, uint8_t);
  125 static uint8_t  _bwi_rf_lo_update_11g(struct bwi_mac *, uint16_t);
  126 static void     bwi_rf_lo_write(struct bwi_mac *, const struct bwi_rf_lo *);
  127 
  128 static void     bwi_rf_set_nrssi_ofs_11g(struct bwi_mac *);
  129 static void     bwi_rf_calc_nrssi_slope_11b(struct bwi_mac *);
  130 static void     bwi_rf_calc_nrssi_slope_11g(struct bwi_mac *);
  131 static void     bwi_rf_set_nrssi_thr_11b(struct bwi_mac *);
  132 static void     bwi_rf_set_nrssi_thr_11g(struct bwi_mac *);
  133 
  134 static void     bwi_rf_init_sw_nrssi_table(struct bwi_mac *);
  135 
  136 static int      bwi_rf_calc_rssi_bcm2050(struct bwi_mac *,
  137                         const struct bwi_rxbuf_hdr *);
  138 static int      bwi_rf_calc_rssi_bcm2053(struct bwi_mac *,
  139                         const struct bwi_rxbuf_hdr *);
  140 static int      bwi_rf_calc_rssi_bcm2060(struct bwi_mac *,
  141                         const struct bwi_rxbuf_hdr *);
  142 static int      bwi_rf_calc_noise_bcm2050(struct bwi_mac *);
  143 static int      bwi_rf_calc_noise_bcm2053(struct bwi_mac *);
  144 static int      bwi_rf_calc_noise_bcm2060(struct bwi_mac *);
  145 
  146 static void     bwi_rf_on_11a(struct bwi_mac *);
  147 static void     bwi_rf_on_11bg(struct bwi_mac *);
  148 
  149 static void     bwi_rf_off_11a(struct bwi_mac *);
  150 static void     bwi_rf_off_11bg(struct bwi_mac *);
  151 static void     bwi_rf_off_11g_rev5(struct bwi_mac *);
  152 
  153 static const int8_t     bwi_txpower_map_11b[BWI_TSSI_MAX] =
  154         { BWI_TXPOWER_MAP_11B };
  155 static const int8_t     bwi_txpower_map_11g[BWI_TSSI_MAX] =
  156         { BWI_TXPOWER_MAP_11G };
  157 
  158 static __inline int16_t
  159 bwi_nrssi_11g(struct bwi_mac *mac)
  160 {
  161         int16_t val;
  162 
  163 #define NRSSI_11G_MASK          __BITS(13, 8)
  164 
  165         val = (int16_t)__SHIFTOUT(PHY_READ(mac, 0x47f), NRSSI_11G_MASK);
  166         if (val >= 32)
  167                 val -= 64;
  168         return val;
  169 
  170 #undef NRSSI_11G_MASK
  171 }
  172 
  173 static __inline struct bwi_rf_lo *
  174 bwi_get_rf_lo(struct bwi_mac *mac, uint16_t rf_atten, uint16_t bbp_atten)
  175 {
  176         int n;
  177 
  178         n = rf_atten + (14 * (bbp_atten / 2));
  179         KASSERT(n < BWI_RFLO_MAX, ("n %d", n));
  180 
  181         return &mac->mac_rf.rf_lo[n];
  182 }
  183 
  184 static __inline int
  185 bwi_rf_lo_isused(struct bwi_mac *mac, const struct bwi_rf_lo *lo)
  186 {
  187         struct bwi_rf *rf = &mac->mac_rf;
  188         int idx;
  189 
  190         idx = lo - rf->rf_lo;
  191         KASSERT(idx >= 0 && idx < BWI_RFLO_MAX, ("idx %d", idx));
  192 
  193         return isset(rf->rf_lo_used, idx);
  194 }
  195 
  196 void
  197 bwi_rf_write(struct bwi_mac *mac, uint16_t ctrl, uint16_t data)
  198 {
  199         struct bwi_softc *sc = mac->mac_sc;
  200 
  201         CSR_WRITE_2(sc, BWI_RF_CTRL, ctrl);
  202         CSR_WRITE_2(sc, BWI_RF_DATA_LO, data);
  203 }
  204 
  205 uint16_t
  206 bwi_rf_read(struct bwi_mac *mac, uint16_t ctrl)
  207 {
  208         struct bwi_rf *rf = &mac->mac_rf;
  209         struct bwi_softc *sc = mac->mac_sc;
  210 
  211         ctrl |= rf->rf_ctrl_rd;
  212         if (rf->rf_ctrl_adj) {
  213                 /* XXX */
  214                 if (ctrl < 0x70)
  215                         ctrl += 0x80;
  216                 else if (ctrl < 0x80)
  217                         ctrl += 0x70;
  218         }
  219 
  220         CSR_WRITE_2(sc, BWI_RF_CTRL, ctrl);
  221         return CSR_READ_2(sc, BWI_RF_DATA_LO);
  222 }
  223 
  224 int
  225 bwi_rf_attach(struct bwi_mac *mac)
  226 {
  227         struct bwi_softc *sc = mac->mac_sc;
  228         struct bwi_phy *phy = &mac->mac_phy;
  229         struct bwi_rf *rf = &mac->mac_rf;
  230         uint16_t type, manu;
  231         uint8_t rev;
  232 
  233         /*
  234          * Get RF manufacture/type/revision
  235          */
  236         if (sc->sc_bbp_id == BWI_BBPID_BCM4317) {
  237                 /*
  238                  * Fake a BCM2050 RF
  239                  */
  240                 manu = BWI_RF_MANUFACT_BCM;
  241                 type = BWI_RF_T_BCM2050;
  242                 if (sc->sc_bbp_rev == 0)
  243                         rev = 3;
  244                 else if (sc->sc_bbp_rev == 1)
  245                         rev = 4;
  246                 else
  247                         rev = 5;
  248         } else {
  249                 uint32_t val;
  250 
  251                 CSR_WRITE_2(sc, BWI_RF_CTRL, BWI_RF_CTRL_RFINFO);
  252                 val = CSR_READ_2(sc, BWI_RF_DATA_HI);
  253                 val <<= 16;
  254 
  255                 CSR_WRITE_2(sc, BWI_RF_CTRL, BWI_RF_CTRL_RFINFO);
  256                 val |= CSR_READ_2(sc, BWI_RF_DATA_LO);
  257 
  258                 manu = __SHIFTOUT(val, BWI_RFINFO_MANUFACT_MASK);
  259                 type = __SHIFTOUT(val, BWI_RFINFO_TYPE_MASK);
  260                 rev = __SHIFTOUT(val, BWI_RFINFO_REV_MASK);
  261         }
  262         device_printf(sc->sc_dev, "RF: manu 0x%03x, type 0x%04x, rev %u\n",
  263                       manu, type, rev);
  264 
  265         /*
  266          * Verify whether the RF is supported
  267          */
  268         rf->rf_ctrl_rd = 0;
  269         rf->rf_ctrl_adj = 0;
  270         switch (phy->phy_mode) {
  271         case IEEE80211_MODE_11A:
  272                 if (manu != BWI_RF_MANUFACT_BCM ||
  273                     type != BWI_RF_T_BCM2060 ||
  274                     rev != 1) {
  275                         device_printf(sc->sc_dev, "only BCM2060 rev 1 RF "
  276                                       "is supported for 11A PHY\n");
  277                         return ENXIO;
  278                 }
  279                 rf->rf_ctrl_rd = BWI_RF_CTRL_RD_11A;
  280                 rf->rf_on = bwi_rf_on_11a;
  281                 rf->rf_off = bwi_rf_off_11a;
  282                 rf->rf_calc_rssi = bwi_rf_calc_rssi_bcm2060;
  283                 rf->rf_calc_noise = bwi_rf_calc_noise_bcm2060;
  284                 break;
  285         case IEEE80211_MODE_11B:
  286                 if (type == BWI_RF_T_BCM2050) {
  287                         rf->rf_ctrl_rd = BWI_RF_CTRL_RD_11BG;
  288                         rf->rf_calc_rssi = bwi_rf_calc_rssi_bcm2050;
  289                         rf->rf_calc_noise = bwi_rf_calc_noise_bcm2050;
  290                 } else if (type == BWI_RF_T_BCM2053) {
  291                         rf->rf_ctrl_adj = 1;
  292                         rf->rf_calc_rssi = bwi_rf_calc_rssi_bcm2053;
  293                         rf->rf_calc_noise = bwi_rf_calc_noise_bcm2053;
  294                 } else {
  295                         device_printf(sc->sc_dev, "only BCM2050/BCM2053 RF "
  296                                       "is supported for 11B PHY\n");
  297                         return ENXIO;
  298                 }
  299                 rf->rf_on = bwi_rf_on_11bg;
  300                 rf->rf_off = bwi_rf_off_11bg;
  301                 rf->rf_calc_nrssi_slope = bwi_rf_calc_nrssi_slope_11b;
  302                 rf->rf_set_nrssi_thr = bwi_rf_set_nrssi_thr_11b;
  303                 if (phy->phy_rev == 6)
  304                         rf->rf_lo_update = bwi_rf_lo_update_11g;
  305                 else
  306                         rf->rf_lo_update = bwi_rf_lo_update_11b;
  307                 break;
  308         case IEEE80211_MODE_11G:
  309                 if (type != BWI_RF_T_BCM2050) {
  310                         device_printf(sc->sc_dev, "only BCM2050 RF "
  311                                       "is supported for 11G PHY\n");
  312                         return ENXIO;
  313                 }
  314                 rf->rf_ctrl_rd = BWI_RF_CTRL_RD_11BG;
  315                 rf->rf_on = bwi_rf_on_11bg;
  316                 if (mac->mac_rev >= 5)
  317                         rf->rf_off = bwi_rf_off_11g_rev5;
  318                 else
  319                         rf->rf_off = bwi_rf_off_11bg;
  320                 rf->rf_calc_nrssi_slope = bwi_rf_calc_nrssi_slope_11g;
  321                 rf->rf_set_nrssi_thr = bwi_rf_set_nrssi_thr_11g;
  322                 rf->rf_calc_rssi = bwi_rf_calc_rssi_bcm2050;
  323                 rf->rf_calc_noise = bwi_rf_calc_noise_bcm2050;
  324                 rf->rf_lo_update = bwi_rf_lo_update_11g;
  325                 break;
  326         default:
  327                 device_printf(sc->sc_dev, "unsupported PHY mode\n");
  328                 return ENXIO;
  329         }
  330 
  331         rf->rf_type = type;
  332         rf->rf_rev = rev;
  333         rf->rf_manu = manu;
  334         rf->rf_curchan = IEEE80211_CHAN_ANY;
  335         rf->rf_ant_mode = BWI_ANT_MODE_AUTO;
  336         return 0;
  337 }
  338 
  339 void
  340 bwi_rf_set_chan(struct bwi_mac *mac, u_int chan, int work_around)
  341 {
  342         struct bwi_softc *sc = mac->mac_sc;
  343 
  344         if (chan == IEEE80211_CHAN_ANY)
  345                 return;
  346 
  347         MOBJ_WRITE_2(mac, BWI_COMM_MOBJ, BWI_COMM_MOBJ_CHAN, chan);
  348 
  349         /* TODO: 11A */
  350 
  351         if (work_around)
  352                 bwi_rf_work_around(mac, chan);
  353 
  354         CSR_WRITE_2(sc, BWI_RF_CHAN, BWI_RF_2GHZ_CHAN(chan));
  355 
  356         if (chan == 14) {
  357                 if (sc->sc_locale == BWI_SPROM_LOCALE_JAPAN)
  358                         HFLAGS_CLRBITS(mac, BWI_HFLAG_NOT_JAPAN);
  359                 else
  360                         HFLAGS_SETBITS(mac, BWI_HFLAG_NOT_JAPAN);
  361                 CSR_SETBITS_2(sc, BWI_RF_CHAN_EX, (1 << 11)); /* XXX */
  362         } else {
  363                 CSR_CLRBITS_2(sc, BWI_RF_CHAN_EX, 0x840); /* XXX */
  364         }
  365         DELAY(8000);    /* DELAY(2000); */
  366 
  367         mac->mac_rf.rf_curchan = chan;
  368 }
  369 
  370 void
  371 bwi_rf_get_gains(struct bwi_mac *mac)
  372 {
  373 #define SAVE_PHY_MAX    15
  374 #define SAVE_RF_MAX     3
  375 
  376         static const uint16_t save_rf_regs[SAVE_RF_MAX] =
  377         { 0x52, 0x43, 0x7a };
  378         static const uint16_t save_phy_regs[SAVE_PHY_MAX] = {
  379                 0x0429, 0x0001, 0x0811, 0x0812,
  380                 0x0814, 0x0815, 0x005a, 0x0059,
  381                 0x0058, 0x000a, 0x0003, 0x080f,
  382                 0x0810, 0x002b, 0x0015
  383         };
  384 
  385         struct bwi_softc *sc = mac->mac_sc;
  386         struct bwi_phy *phy = &mac->mac_phy;
  387         struct bwi_rf *rf = &mac->mac_rf;
  388         uint16_t save_phy[SAVE_PHY_MAX];
  389         uint16_t save_rf[SAVE_RF_MAX];
  390         uint16_t trsw;
  391         int i, j, loop1_max, loop1, loop2;
  392 
  393         /*
  394          * Save PHY/RF registers for later restoration
  395          */
  396         for (i = 0; i < SAVE_PHY_MAX; ++i)
  397                 save_phy[i] = PHY_READ(mac, save_phy_regs[i]);
  398         PHY_READ(mac, 0x2d); /* dummy read */
  399 
  400         for (i = 0; i < SAVE_RF_MAX; ++i)
  401                 save_rf[i] = RF_READ(mac, save_rf_regs[i]);
  402 
  403         PHY_CLRBITS(mac, 0x429, 0xc000);
  404         PHY_SETBITS(mac, 0x1, 0x8000);
  405 
  406         PHY_SETBITS(mac, 0x811, 0x2);
  407         PHY_CLRBITS(mac, 0x812, 0x2);
  408         PHY_SETBITS(mac, 0x811, 0x1);
  409         PHY_CLRBITS(mac, 0x812, 0x1);
  410 
  411         PHY_SETBITS(mac, 0x814, 0x1);
  412         PHY_CLRBITS(mac, 0x815, 0x1);
  413         PHY_SETBITS(mac, 0x814, 0x2);
  414         PHY_CLRBITS(mac, 0x815, 0x2);
  415 
  416         PHY_SETBITS(mac, 0x811, 0xc);
  417         PHY_SETBITS(mac, 0x812, 0xc);
  418         PHY_SETBITS(mac, 0x811, 0x30);
  419         PHY_FILT_SETBITS(mac, 0x812, 0xffcf, 0x10);
  420 
  421         PHY_WRITE(mac, 0x5a, 0x780);
  422         PHY_WRITE(mac, 0x59, 0xc810);
  423         PHY_WRITE(mac, 0x58, 0xd);
  424         PHY_SETBITS(mac, 0xa, 0x2000);
  425 
  426         PHY_SETBITS(mac, 0x814, 0x4);
  427         PHY_CLRBITS(mac, 0x815, 0x4);
  428 
  429         PHY_FILT_SETBITS(mac, 0x3, 0xff9f, 0x40);
  430 
  431         if (rf->rf_rev == 8) {
  432                 loop1_max = 15;
  433                 RF_WRITE(mac, 0x43, loop1_max);
  434         } else {
  435                 loop1_max = 9;
  436                 RF_WRITE(mac, 0x52, 0x0);
  437                 RF_FILT_SETBITS(mac, 0x43, 0xfff0, loop1_max);
  438         }
  439 
  440         bwi_phy_set_bbp_atten(mac, 11);
  441 
  442         if (phy->phy_rev >= 3)
  443                 PHY_WRITE(mac, 0x80f, 0xc020);
  444         else
  445                 PHY_WRITE(mac, 0x80f, 0x8020);
  446         PHY_WRITE(mac, 0x810, 0);
  447 
  448         PHY_FILT_SETBITS(mac, 0x2b, 0xffc0, 0x1);
  449         PHY_FILT_SETBITS(mac, 0x2b, 0xc0ff, 0x800);
  450         PHY_SETBITS(mac, 0x811, 0x100);
  451         PHY_CLRBITS(mac, 0x812, 0x3000);
  452 
  453         if ((sc->sc_card_flags & BWI_CARD_F_EXT_LNA) &&
  454             phy->phy_rev >= 7) {
  455                 PHY_SETBITS(mac, 0x811, 0x800);
  456                 PHY_SETBITS(mac, 0x812, 0x8000);
  457         }
  458         RF_CLRBITS(mac, 0x7a, 0xff08);
  459 
  460         /*
  461          * Find out 'loop1/loop2', which will be used to calculate
  462          * max loopback gain later
  463          */
  464         j = 0;
  465         for (i = 0; i < loop1_max; ++i) {
  466                 for (j = 0; j < 16; ++j) {
  467                         RF_WRITE(mac, 0x43, i);
  468 
  469                         if (bwi_rf_gain_max_reached(mac, j))
  470                                 goto loop1_exit;
  471                 }
  472         }
  473 loop1_exit:
  474         loop1 = i;
  475         loop2 = j;
  476 
  477         /*
  478          * Find out 'trsw', which will be used to calculate
  479          * TRSW(TX/RX switch) RX gain later
  480          */
  481         if (loop2 >= 8) {
  482                 PHY_SETBITS(mac, 0x812, 0x30);
  483                 trsw = 0x1b;
  484                 for (i = loop2 - 8; i < 16; ++i) {
  485                         trsw -= 3;
  486                         if (bwi_rf_gain_max_reached(mac, i))
  487                                 break;
  488                 }
  489         } else {
  490                 trsw = 0x18;
  491         }
  492 
  493         /*
  494          * Restore saved PHY/RF registers
  495          */
  496         /* First 4 saved PHY registers need special processing */
  497         for (i = 4; i < SAVE_PHY_MAX; ++i)
  498                 PHY_WRITE(mac, save_phy_regs[i], save_phy[i]);
  499 
  500         bwi_phy_set_bbp_atten(mac, mac->mac_tpctl.bbp_atten);
  501 
  502         for (i = 0; i < SAVE_RF_MAX; ++i)
  503                 RF_WRITE(mac, save_rf_regs[i], save_rf[i]);
  504 
  505         PHY_WRITE(mac, save_phy_regs[2], save_phy[2] | 0x3);
  506         DELAY(10);
  507         PHY_WRITE(mac, save_phy_regs[2], save_phy[2]);
  508         PHY_WRITE(mac, save_phy_regs[3], save_phy[3]);
  509         PHY_WRITE(mac, save_phy_regs[0], save_phy[0]);
  510         PHY_WRITE(mac, save_phy_regs[1], save_phy[1]);
  511 
  512         /*
  513          * Calculate gains
  514          */
  515         rf->rf_lo_gain = (loop2 * 6) - (loop1 * 4) - 11;
  516         rf->rf_rx_gain = trsw * 2;
  517         DPRINTF(mac->mac_sc, BWI_DBG_RF | BWI_DBG_INIT,
  518                 "lo gain: %u, rx gain: %u\n",
  519                 rf->rf_lo_gain, rf->rf_rx_gain);
  520 
  521 #undef SAVE_RF_MAX
  522 #undef SAVE_PHY_MAX
  523 }
  524 
  525 void
  526 bwi_rf_init(struct bwi_mac *mac)
  527 {
  528         struct bwi_rf *rf = &mac->mac_rf;
  529 
  530         if (rf->rf_type == BWI_RF_T_BCM2060) {
  531                 /* TODO: 11A */
  532         } else {
  533                 if (rf->rf_flags & BWI_RF_F_INITED)
  534                         RF_WRITE(mac, 0x78, rf->rf_calib);
  535                 else
  536                         bwi_rf_init_bcm2050(mac);
  537         }
  538 }
  539 
  540 static void
  541 bwi_rf_off_11a(struct bwi_mac *mac)
  542 {
  543         RF_WRITE(mac, 0x4, 0xff);
  544         RF_WRITE(mac, 0x5, 0xfb);
  545 
  546         PHY_SETBITS(mac, 0x10, 0x8);
  547         PHY_SETBITS(mac, 0x11, 0x8);
  548 
  549         PHY_WRITE(mac, 0x15, 0xaa00);
  550 }
  551 
  552 static void
  553 bwi_rf_off_11bg(struct bwi_mac *mac)
  554 {
  555         PHY_WRITE(mac, 0x15, 0xaa00);
  556 }
  557 
  558 static void
  559 bwi_rf_off_11g_rev5(struct bwi_mac *mac)
  560 {
  561         PHY_SETBITS(mac, 0x811, 0x8c);
  562         PHY_CLRBITS(mac, 0x812, 0x8c);
  563 }
  564 
  565 static void
  566 bwi_rf_work_around(struct bwi_mac *mac, u_int chan)
  567 {
  568         struct bwi_softc *sc = mac->mac_sc;
  569         struct bwi_rf *rf = &mac->mac_rf;
  570 
  571         if (chan == IEEE80211_CHAN_ANY) {
  572                 device_printf(sc->sc_dev, "%s invalid channel!!\n", __func__);
  573                 return;
  574         }
  575 
  576         if (rf->rf_type != BWI_RF_T_BCM2050 || rf->rf_rev >= 6)
  577                 return;
  578 
  579         if (chan <= 10)
  580                 CSR_WRITE_2(sc, BWI_RF_CHAN, BWI_RF_2GHZ_CHAN(chan + 4));
  581         else
  582                 CSR_WRITE_2(sc, BWI_RF_CHAN, BWI_RF_2GHZ_CHAN(1));
  583         DELAY(1000);
  584         CSR_WRITE_2(sc, BWI_RF_CHAN, BWI_RF_2GHZ_CHAN(chan));
  585 }
  586 
  587 static __inline struct bwi_rf_lo *
  588 bwi_rf_lo_find(struct bwi_mac *mac, const struct bwi_tpctl *tpctl)
  589 {
  590         uint16_t rf_atten, bbp_atten;
  591         int remap_rf_atten;
  592 
  593         remap_rf_atten = 1;
  594         if (tpctl == NULL) {
  595                 bbp_atten = 2;
  596                 rf_atten = 3;
  597         } else {
  598                 if (tpctl->tp_ctrl1 == 3)
  599                         remap_rf_atten = 0;
  600 
  601                 bbp_atten = tpctl->bbp_atten;
  602                 rf_atten = tpctl->rf_atten;
  603 
  604                 if (bbp_atten > 6)
  605                         bbp_atten = 6;
  606         }
  607 
  608         if (remap_rf_atten) {
  609 #define MAP_MAX 10
  610                 static const uint16_t map[MAP_MAX] =
  611                 { 11, 10, 11, 12, 13, 12, 13, 12, 13, 12 };
  612 
  613 #if 0
  614                 KASSERT(rf_atten < MAP_MAX, ("rf_atten %d", rf_atten));
  615                 rf_atten = map[rf_atten];
  616 #else
  617                 if (rf_atten >= MAP_MAX) {
  618                         rf_atten = 0;   /* XXX */
  619                 } else {
  620                         rf_atten = map[rf_atten];
  621                 }
  622 #endif
  623 #undef MAP_MAX
  624         }
  625 
  626         return bwi_get_rf_lo(mac, rf_atten, bbp_atten);
  627 }
  628 
  629 void
  630 bwi_rf_lo_adjust(struct bwi_mac *mac, const struct bwi_tpctl *tpctl)
  631 {
  632         const struct bwi_rf_lo *lo;
  633 
  634         lo = bwi_rf_lo_find(mac, tpctl);
  635         RF_LO_WRITE(mac, lo);
  636 }
  637 
  638 static void
  639 bwi_rf_lo_write(struct bwi_mac *mac, const struct bwi_rf_lo *lo)
  640 {
  641         uint16_t val;
  642 
  643         val = (uint8_t)lo->ctrl_lo;
  644         val |= ((uint8_t)lo->ctrl_hi) << 8;
  645 
  646         PHY_WRITE(mac, BWI_PHYR_RF_LO, val);
  647 }
  648 
  649 static int
  650 bwi_rf_gain_max_reached(struct bwi_mac *mac, int idx)
  651 {
  652         PHY_FILT_SETBITS(mac, 0x812, 0xf0ff, idx << 8);
  653         PHY_FILT_SETBITS(mac, 0x15, 0xfff, 0xa000);
  654         PHY_SETBITS(mac, 0x15, 0xf000);
  655 
  656         DELAY(20);
  657 
  658         return (PHY_READ(mac, 0x2d) >= 0xdfc);
  659 }
  660 
  661 /* XXX use bitmap array */
  662 static __inline uint16_t
  663 bitswap4(uint16_t val)
  664 {
  665         uint16_t ret;
  666 
  667         ret = (val & 0x8) >> 3;
  668         ret |= (val & 0x4) >> 1;
  669         ret |= (val & 0x2) << 1;
  670         ret |= (val & 0x1) << 3;
  671         return ret;
  672 }
  673 
  674 static __inline uint16_t
  675 bwi_phy812_value(struct bwi_mac *mac, uint16_t lpd)
  676 {
  677         struct bwi_softc *sc = mac->mac_sc;
  678         struct bwi_phy *phy = &mac->mac_phy;
  679         struct bwi_rf *rf = &mac->mac_rf;
  680         uint16_t lo_gain, ext_lna, loop;
  681 
  682         if ((phy->phy_flags & BWI_PHY_F_LINKED) == 0)
  683                 return 0;
  684 
  685         lo_gain = rf->rf_lo_gain;
  686         if (rf->rf_rev == 8)
  687                 lo_gain += 0x3e;
  688         else
  689                 lo_gain += 0x26;
  690 
  691         if (lo_gain >= 0x46) {
  692                 lo_gain -= 0x46;
  693                 ext_lna = 0x3000;
  694         } else if (lo_gain >= 0x3a) {
  695                 lo_gain -= 0x3a;
  696                 ext_lna = 0x1000;
  697         } else if (lo_gain >= 0x2e) {
  698                 lo_gain -= 0x2e;
  699                 ext_lna = 0x2000;
  700         } else {
  701                 lo_gain -= 0x10;
  702                 ext_lna = 0;
  703         }
  704 
  705         for (loop = 0; loop < 16; ++loop) {
  706                 lo_gain -= (6 * loop);
  707                 if (lo_gain < 6)
  708                         break;
  709         }
  710 
  711         if (phy->phy_rev >= 7 && (sc->sc_card_flags & BWI_CARD_F_EXT_LNA)) {
  712                 if (ext_lna)
  713                         ext_lna |= 0x8000;
  714                 ext_lna |= (loop << 8);
  715                 switch (lpd) {
  716                 case 0x011:
  717                         return 0x8f92;
  718                 case 0x001:
  719                         return (0x8092 | ext_lna);
  720                 case 0x101:
  721                         return (0x2092 | ext_lna);
  722                 case 0x100:
  723                         return (0x2093 | ext_lna);
  724                 default:
  725                         panic("unsupported lpd\n");
  726                 }
  727         } else {
  728                 ext_lna |= (loop << 8);
  729                 switch (lpd) {
  730                 case 0x011:
  731                         return 0xf92;
  732                 case 0x001:
  733                 case 0x101:
  734                         return (0x92 | ext_lna);
  735                 case 0x100:
  736                         return (0x93 | ext_lna);
  737                 default:
  738                         panic("unsupported lpd\n");
  739                 }
  740         }
  741 
  742         panic("never reached\n");
  743         return 0;
  744 }
  745 
  746 void
  747 bwi_rf_init_bcm2050(struct bwi_mac *mac)
  748 {
  749 #define SAVE_RF_MAX             3
  750 #define SAVE_PHY_COMM_MAX       4
  751 #define SAVE_PHY_11G_MAX        6
  752 
  753         static const uint16_t save_rf_regs[SAVE_RF_MAX] =
  754         { 0x0043, 0x0051, 0x0052 };
  755         static const uint16_t save_phy_regs_comm[SAVE_PHY_COMM_MAX] =
  756         { 0x0015, 0x005a, 0x0059, 0x0058 };
  757         static const uint16_t save_phy_regs_11g[SAVE_PHY_11G_MAX] =
  758         { 0x0811, 0x0812, 0x0814, 0x0815, 0x0429, 0x0802 };
  759 
  760         uint16_t save_rf[SAVE_RF_MAX];
  761         uint16_t save_phy_comm[SAVE_PHY_COMM_MAX];
  762         uint16_t save_phy_11g[SAVE_PHY_11G_MAX];
  763         uint16_t phyr_35, phyr_30 = 0, rfr_78, phyr_80f = 0, phyr_810 = 0;
  764         uint16_t bphy_ctrl = 0, bbp_atten, rf_chan_ex;
  765         uint16_t phy812_val;
  766         uint16_t calib;
  767         uint32_t test_lim, test;
  768         struct bwi_softc *sc = mac->mac_sc;
  769         struct bwi_phy *phy = &mac->mac_phy;
  770         struct bwi_rf *rf = &mac->mac_rf;
  771         int i;
  772 
  773         /*
  774          * Save registers for later restoring
  775          */
  776         for (i = 0; i < SAVE_RF_MAX; ++i)
  777                 save_rf[i] = RF_READ(mac, save_rf_regs[i]);
  778         for (i = 0; i < SAVE_PHY_COMM_MAX; ++i)
  779                 save_phy_comm[i] = PHY_READ(mac, save_phy_regs_comm[i]);
  780 
  781         if (phy->phy_mode == IEEE80211_MODE_11B) {
  782                 phyr_30 = PHY_READ(mac, 0x30);
  783                 bphy_ctrl = CSR_READ_2(sc, BWI_BPHY_CTRL);
  784 
  785                 PHY_WRITE(mac, 0x30, 0xff);
  786                 CSR_WRITE_2(sc, BWI_BPHY_CTRL, 0x3f3f);
  787         } else if ((phy->phy_flags & BWI_PHY_F_LINKED) || phy->phy_rev >= 2) {
  788                 for (i = 0; i < SAVE_PHY_11G_MAX; ++i) {
  789                         save_phy_11g[i] =
  790                                 PHY_READ(mac, save_phy_regs_11g[i]);
  791                 }
  792 
  793                 PHY_SETBITS(mac, 0x814, 0x3);
  794                 PHY_CLRBITS(mac, 0x815, 0x3);
  795                 PHY_CLRBITS(mac, 0x429, 0x8000);
  796                 PHY_CLRBITS(mac, 0x802, 0x3);
  797 
  798                 phyr_80f = PHY_READ(mac, 0x80f);
  799                 phyr_810 = PHY_READ(mac, 0x810);
  800 
  801                 if (phy->phy_rev >= 3)
  802                         PHY_WRITE(mac, 0x80f, 0xc020);
  803                 else
  804                         PHY_WRITE(mac, 0x80f, 0x8020);
  805                 PHY_WRITE(mac, 0x810, 0);
  806 
  807                 phy812_val = bwi_phy812_value(mac, 0x011);
  808                 PHY_WRITE(mac, 0x812, phy812_val);
  809                 if (phy->phy_rev < 7 ||
  810                     (sc->sc_card_flags & BWI_CARD_F_EXT_LNA) == 0)
  811                         PHY_WRITE(mac, 0x811, 0x1b3);
  812                 else
  813                         PHY_WRITE(mac, 0x811, 0x9b3);
  814         }
  815         CSR_SETBITS_2(sc, BWI_RF_ANTDIV, 0x8000);
  816 
  817         phyr_35 = PHY_READ(mac, 0x35);
  818         PHY_CLRBITS(mac, 0x35, 0x80);
  819 
  820         bbp_atten = CSR_READ_2(sc, BWI_BBP_ATTEN);
  821         rf_chan_ex = CSR_READ_2(sc, BWI_RF_CHAN_EX);
  822 
  823         if (phy->phy_version == 0) {
  824                 CSR_WRITE_2(sc, BWI_BBP_ATTEN, 0x122);
  825         } else {
  826                 if (phy->phy_version >= 2)
  827                         PHY_FILT_SETBITS(mac, 0x3, 0xffbf, 0x40);
  828                 CSR_SETBITS_2(sc, BWI_RF_CHAN_EX, 0x2000);
  829         }
  830 
  831         calib = bwi_rf_calibval(mac);
  832 
  833         if (phy->phy_mode == IEEE80211_MODE_11B)
  834                 RF_WRITE(mac, 0x78, 0x26);
  835 
  836         if ((phy->phy_flags & BWI_PHY_F_LINKED) || phy->phy_rev >= 2) {
  837                 phy812_val = bwi_phy812_value(mac, 0x011);
  838                 PHY_WRITE(mac, 0x812, phy812_val);
  839         }
  840 
  841         PHY_WRITE(mac, 0x15, 0xbfaf);
  842         PHY_WRITE(mac, 0x2b, 0x1403);
  843 
  844         if ((phy->phy_flags & BWI_PHY_F_LINKED) || phy->phy_rev >= 2) {
  845                 phy812_val = bwi_phy812_value(mac, 0x001);
  846                 PHY_WRITE(mac, 0x812, phy812_val);
  847         }
  848 
  849         PHY_WRITE(mac, 0x15, 0xbfa0);
  850 
  851         RF_SETBITS(mac, 0x51, 0x4);
  852         if (rf->rf_rev == 8) {
  853                 RF_WRITE(mac, 0x43, 0x1f);
  854         } else {
  855                 RF_WRITE(mac, 0x52, 0);
  856                 RF_FILT_SETBITS(mac, 0x43, 0xfff0, 0x9);
  857         }
  858 
  859         test_lim = 0;
  860         PHY_WRITE(mac, 0x58, 0);
  861         for (i = 0; i < 16; ++i) {
  862                 PHY_WRITE(mac, 0x5a, 0x480);
  863                 PHY_WRITE(mac, 0x59, 0xc810);
  864 
  865                 PHY_WRITE(mac, 0x58, 0xd);
  866                 if ((phy->phy_flags & BWI_PHY_F_LINKED) || phy->phy_rev >= 2) {
  867                         phy812_val = bwi_phy812_value(mac, 0x101);
  868                         PHY_WRITE(mac, 0x812, phy812_val);
  869                 }
  870                 PHY_WRITE(mac, 0x15, 0xafb0);
  871                 DELAY(10);
  872 
  873                 if ((phy->phy_flags & BWI_PHY_F_LINKED) || phy->phy_rev >= 2) {
  874                         phy812_val = bwi_phy812_value(mac, 0x101);
  875                         PHY_WRITE(mac, 0x812, phy812_val);
  876                 }
  877                 PHY_WRITE(mac, 0x15, 0xefb0);
  878                 DELAY(10);
  879 
  880                 if ((phy->phy_flags & BWI_PHY_F_LINKED) || phy->phy_rev >= 2) {
  881                         phy812_val = bwi_phy812_value(mac, 0x100);
  882                         PHY_WRITE(mac, 0x812, phy812_val);
  883                 }
  884                 PHY_WRITE(mac, 0x15, 0xfff0);
  885                 DELAY(20);
  886 
  887                 test_lim += PHY_READ(mac, 0x2d);
  888 
  889                 PHY_WRITE(mac, 0x58, 0);
  890                 if ((phy->phy_flags & BWI_PHY_F_LINKED) || phy->phy_rev >= 2) {
  891                         phy812_val = bwi_phy812_value(mac, 0x101);
  892                         PHY_WRITE(mac, 0x812, phy812_val);
  893                 }
  894                 PHY_WRITE(mac, 0x15, 0xafb0);
  895         }
  896         ++test_lim;
  897         test_lim >>= 9;
  898 
  899         DELAY(10);
  900 
  901         test = 0;
  902         PHY_WRITE(mac, 0x58, 0);
  903         for (i = 0; i < 16; ++i) {
  904                 int j;
  905 
  906                 rfr_78 = (bitswap4(i) << 1) | 0x20;
  907                 RF_WRITE(mac, 0x78, rfr_78);
  908                 DELAY(10);
  909 
  910                 /* NB: This block is slight different than the above one */
  911                 for (j = 0; j < 16; ++j) {
  912                         PHY_WRITE(mac, 0x5a, 0xd80);
  913                         PHY_WRITE(mac, 0x59, 0xc810);
  914 
  915                         PHY_WRITE(mac, 0x58, 0xd);
  916                         if ((phy->phy_flags & BWI_PHY_F_LINKED) ||
  917                             phy->phy_rev >= 2) {
  918                                 phy812_val = bwi_phy812_value(mac, 0x101);
  919                                 PHY_WRITE(mac, 0x812, phy812_val);
  920                         }
  921                         PHY_WRITE(mac, 0x15, 0xafb0);
  922                         DELAY(10);
  923 
  924                         if ((phy->phy_flags & BWI_PHY_F_LINKED) ||
  925                             phy->phy_rev >= 2) {
  926                                 phy812_val = bwi_phy812_value(mac, 0x101);
  927                                 PHY_WRITE(mac, 0x812, phy812_val);
  928                         }
  929                         PHY_WRITE(mac, 0x15, 0xefb0);
  930                         DELAY(10);
  931 
  932                         if ((phy->phy_flags & BWI_PHY_F_LINKED) ||
  933                             phy->phy_rev >= 2) {
  934                                 phy812_val = bwi_phy812_value(mac, 0x100);
  935                                 PHY_WRITE(mac, 0x812, phy812_val);
  936                         }
  937                         PHY_WRITE(mac, 0x15, 0xfff0);
  938                         DELAY(10);
  939 
  940                         test += PHY_READ(mac, 0x2d);
  941 
  942                         PHY_WRITE(mac, 0x58, 0);
  943                         if ((phy->phy_flags & BWI_PHY_F_LINKED) ||
  944                             phy->phy_rev >= 2) {
  945                                 phy812_val = bwi_phy812_value(mac, 0x101);
  946                                 PHY_WRITE(mac, 0x812, phy812_val);
  947                         }
  948                         PHY_WRITE(mac, 0x15, 0xafb0);
  949                 }
  950 
  951                 ++test;
  952                 test >>= 8;
  953 
  954                 if (test > test_lim)
  955                         break;
  956         }
  957         if (i > 15)
  958                 rf->rf_calib = rfr_78;
  959         else
  960                 rf->rf_calib = calib;
  961         if (rf->rf_calib != 0xffff) {
  962                 DPRINTF(sc, BWI_DBG_RF | BWI_DBG_INIT,
  963                         "RF calibration value: 0x%04x\n", rf->rf_calib);
  964                 rf->rf_flags |= BWI_RF_F_INITED;
  965         }
  966 
  967         /*
  968          * Restore trashes registers
  969          */
  970         PHY_WRITE(mac, save_phy_regs_comm[0], save_phy_comm[0]);
  971 
  972         for (i = 0; i < SAVE_RF_MAX; ++i) {
  973                 int pos = (i + 1) % SAVE_RF_MAX;
  974 
  975                 RF_WRITE(mac, save_rf_regs[pos], save_rf[pos]);
  976         }
  977         for (i = 1; i < SAVE_PHY_COMM_MAX; ++i)
  978                 PHY_WRITE(mac, save_phy_regs_comm[i], save_phy_comm[i]);
  979 
  980         CSR_WRITE_2(sc, BWI_BBP_ATTEN, bbp_atten);
  981         if (phy->phy_version != 0)
  982                 CSR_WRITE_2(sc, BWI_RF_CHAN_EX, rf_chan_ex);
  983 
  984         PHY_WRITE(mac, 0x35, phyr_35);
  985         bwi_rf_work_around(mac, rf->rf_curchan);
  986 
  987         if (phy->phy_mode == IEEE80211_MODE_11B) {
  988                 PHY_WRITE(mac, 0x30, phyr_30);
  989                 CSR_WRITE_2(sc, BWI_BPHY_CTRL, bphy_ctrl);
  990         } else if ((phy->phy_flags & BWI_PHY_F_LINKED) || phy->phy_rev >= 2) {
  991                 /* XXX Spec only says when PHY is linked (gmode) */
  992                 CSR_CLRBITS_2(sc, BWI_RF_ANTDIV, 0x8000);
  993 
  994                 for (i = 0; i < SAVE_PHY_11G_MAX; ++i) {
  995                         PHY_WRITE(mac, save_phy_regs_11g[i],
  996                                   save_phy_11g[i]);
  997                 }
  998 
  999                 PHY_WRITE(mac, 0x80f, phyr_80f);
 1000                 PHY_WRITE(mac, 0x810, phyr_810);
 1001         }
 1002 
 1003 #undef SAVE_PHY_11G_MAX
 1004 #undef SAVE_PHY_COMM_MAX
 1005 #undef SAVE_RF_MAX
 1006 }
 1007 
 1008 static uint16_t
 1009 bwi_rf_calibval(struct bwi_mac *mac)
 1010 {
 1011         /* http://bcm-specs.sipsolutions.net/RCCTable */
 1012         static const uint16_t rf_calibvals[] = {
 1013                 0x2, 0x3, 0x1, 0xf, 0x6, 0x7, 0x5, 0xf,
 1014                 0xa, 0xb, 0x9, 0xf, 0xe, 0xf, 0xd, 0xf
 1015         };
 1016         uint16_t val, calib;
 1017         int idx;
 1018 
 1019         val = RF_READ(mac, BWI_RFR_BBP_ATTEN);
 1020         idx = __SHIFTOUT(val, BWI_RFR_BBP_ATTEN_CALIB_IDX);
 1021         KASSERT(idx < (int)nitems(rf_calibvals), ("idx %d", idx));
 1022 
 1023         calib = rf_calibvals[idx] << 1;
 1024         if (val & BWI_RFR_BBP_ATTEN_CALIB_BIT)
 1025                 calib |= 0x1;
 1026         calib |= 0x20;
 1027 
 1028         return calib;
 1029 }
 1030 
 1031 static __inline int32_t
 1032 _bwi_adjust_devide(int32_t num, int32_t den)
 1033 {
 1034         if (num < 0)
 1035                 return (num / den);
 1036         else
 1037                 return (num + den / 2) / den;
 1038 }
 1039 
 1040 /*
 1041  * http://bcm-specs.sipsolutions.net/TSSI_to_DBM_Table
 1042  * "calculating table entries"
 1043  */
 1044 static int
 1045 bwi_rf_calc_txpower(int8_t *txpwr, uint8_t idx, const int16_t pa_params[])
 1046 {
 1047         int32_t m1, m2, f, dbm;
 1048         int i;
 1049 
 1050         m1 = _bwi_adjust_devide(16 * pa_params[0] + idx * pa_params[1], 32);
 1051         m2 = imax(_bwi_adjust_devide(32768 + idx * pa_params[2], 256), 1);
 1052 
 1053 #define ITER_MAX        16
 1054 
 1055         f = 256;
 1056         for (i = 0; i < ITER_MAX; ++i) {
 1057                 int32_t q, d;
 1058 
 1059                 q = _bwi_adjust_devide(
 1060                         f * 4096 - _bwi_adjust_devide(m2 * f, 16) * f, 2048);
 1061                 d = abs(q - f);
 1062                 f = q;
 1063 
 1064                 if (d < 2)
 1065                         break;
 1066         }
 1067         if (i == ITER_MAX)
 1068                 return EINVAL;
 1069 
 1070 #undef ITER_MAX
 1071 
 1072         dbm = _bwi_adjust_devide(m1 * f, 8192);
 1073         if (dbm < -127)
 1074                 dbm = -127;
 1075         else if (dbm > 128)
 1076                 dbm = 128;
 1077 
 1078         *txpwr = dbm;
 1079         return 0;
 1080 }
 1081 
 1082 int
 1083 bwi_rf_map_txpower(struct bwi_mac *mac)
 1084 {
 1085         struct bwi_softc *sc = mac->mac_sc;
 1086         struct bwi_rf *rf = &mac->mac_rf;
 1087         struct bwi_phy *phy = &mac->mac_phy;
 1088         uint16_t sprom_ofs, val, mask;
 1089         int16_t pa_params[3];
 1090         int error = 0, i, ant_gain, reg_txpower_max;
 1091 
 1092         /*
 1093          * Find out max TX power
 1094          */
 1095         val = bwi_read_sprom(sc, BWI_SPROM_MAX_TXPWR);
 1096         if (phy->phy_mode == IEEE80211_MODE_11A) {
 1097                 rf->rf_txpower_max = __SHIFTOUT(val,
 1098                                      BWI_SPROM_MAX_TXPWR_MASK_11A);
 1099         } else {
 1100                 rf->rf_txpower_max = __SHIFTOUT(val,
 1101                                      BWI_SPROM_MAX_TXPWR_MASK_11BG);
 1102 
 1103                 if ((sc->sc_card_flags & BWI_CARD_F_PA_GPIO9) &&
 1104                     phy->phy_mode == IEEE80211_MODE_11G)
 1105                         rf->rf_txpower_max -= 3;
 1106         }
 1107         if (rf->rf_txpower_max <= 0) {
 1108                 device_printf(sc->sc_dev, "invalid max txpower in sprom\n");
 1109                 rf->rf_txpower_max = 74;
 1110         }
 1111         DPRINTF(sc, BWI_DBG_RF | BWI_DBG_TXPOWER | BWI_DBG_ATTACH,
 1112                 "max txpower from sprom: %d dBm\n", rf->rf_txpower_max);
 1113 
 1114         /*
 1115          * Find out region/domain max TX power, which is adjusted
 1116          * by antenna gain and 1.5 dBm fluctuation as mentioned
 1117          * in v3 spec.
 1118          */
 1119         val = bwi_read_sprom(sc, BWI_SPROM_ANT_GAIN);
 1120         if (phy->phy_mode == IEEE80211_MODE_11A)
 1121                 ant_gain = __SHIFTOUT(val, BWI_SPROM_ANT_GAIN_MASK_11A);
 1122         else
 1123                 ant_gain = __SHIFTOUT(val, BWI_SPROM_ANT_GAIN_MASK_11BG);
 1124         if (ant_gain == 0xff) {
 1125                 device_printf(sc->sc_dev, "invalid antenna gain in sprom\n");
 1126                 ant_gain = 2;
 1127         }
 1128         ant_gain *= 4;
 1129         DPRINTF(sc, BWI_DBG_RF | BWI_DBG_TXPOWER | BWI_DBG_ATTACH,
 1130                 "ant gain %d dBm\n", ant_gain);
 1131 
 1132         reg_txpower_max = 90 - ant_gain - 6;    /* XXX magic number */
 1133         DPRINTF(sc, BWI_DBG_RF | BWI_DBG_TXPOWER | BWI_DBG_ATTACH,
 1134                 "region/domain max txpower %d dBm\n", reg_txpower_max);
 1135 
 1136         /*
 1137          * Force max TX power within region/domain TX power limit
 1138          */
 1139         if (rf->rf_txpower_max > reg_txpower_max)
 1140                 rf->rf_txpower_max = reg_txpower_max;
 1141         DPRINTF(sc, BWI_DBG_RF | BWI_DBG_TXPOWER | BWI_DBG_ATTACH,
 1142                 "max txpower %d dBm\n", rf->rf_txpower_max);
 1143 
 1144         /*
 1145          * Create TSSI to TX power mapping
 1146          */
 1147 
 1148         if (sc->sc_bbp_id == BWI_BBPID_BCM4301 &&
 1149             rf->rf_type != BWI_RF_T_BCM2050) {
 1150                 rf->rf_idle_tssi0 = BWI_DEFAULT_IDLE_TSSI;
 1151                 bcopy(bwi_txpower_map_11b, rf->rf_txpower_map0,
 1152                       sizeof(rf->rf_txpower_map0));
 1153                 goto back;
 1154         }
 1155 
 1156 #define IS_VALID_PA_PARAM(p)    ((p) != 0 && (p) != -1)
 1157 
 1158         /*
 1159          * Extract PA parameters
 1160          */
 1161         if (phy->phy_mode == IEEE80211_MODE_11A)
 1162                 sprom_ofs = BWI_SPROM_PA_PARAM_11A;
 1163         else
 1164                 sprom_ofs = BWI_SPROM_PA_PARAM_11BG;
 1165         for (i = 0; i < nitems(pa_params); ++i)
 1166                 pa_params[i] = (int16_t)bwi_read_sprom(sc, sprom_ofs + (i * 2));
 1167 
 1168         for (i = 0; i < nitems(pa_params); ++i) {
 1169                 /*
 1170                  * If one of the PA parameters from SPROM is not valid,
 1171                  * fall back to the default values, if there are any.
 1172                  */
 1173                 if (!IS_VALID_PA_PARAM(pa_params[i])) {
 1174                         const int8_t *txpower_map;
 1175 
 1176                         if (phy->phy_mode == IEEE80211_MODE_11A) {
 1177                                 device_printf(sc->sc_dev,
 1178                                           "no tssi2dbm table for 11a PHY\n");
 1179                                 return ENXIO;
 1180                         }
 1181 
 1182                         if (phy->phy_mode == IEEE80211_MODE_11G) {
 1183                                 DPRINTF(sc,
 1184                                 BWI_DBG_RF | BWI_DBG_TXPOWER | BWI_DBG_ATTACH,
 1185                                 "%s\n", "use default 11g TSSI map");
 1186                                 txpower_map = bwi_txpower_map_11g;
 1187                         } else {
 1188                                 DPRINTF(sc,
 1189                                 BWI_DBG_RF | BWI_DBG_TXPOWER | BWI_DBG_ATTACH,
 1190                                 "%s\n", "use default 11b TSSI map");
 1191                                 txpower_map = bwi_txpower_map_11b;
 1192                         }
 1193 
 1194                         rf->rf_idle_tssi0 = BWI_DEFAULT_IDLE_TSSI;
 1195                         bcopy(txpower_map, rf->rf_txpower_map0,
 1196                               sizeof(rf->rf_txpower_map0));
 1197                         goto back;
 1198                 }
 1199         }
 1200 
 1201         /*
 1202          * All of the PA parameters from SPROM are valid.
 1203          */
 1204 
 1205         /*
 1206          * Extract idle TSSI from SPROM.
 1207          */
 1208         val = bwi_read_sprom(sc, BWI_SPROM_IDLE_TSSI);
 1209         DPRINTF(sc, BWI_DBG_RF | BWI_DBG_TXPOWER | BWI_DBG_ATTACH,
 1210                 "sprom idle tssi: 0x%04x\n", val);
 1211 
 1212         if (phy->phy_mode == IEEE80211_MODE_11A)
 1213                 mask = BWI_SPROM_IDLE_TSSI_MASK_11A;
 1214         else
 1215                 mask = BWI_SPROM_IDLE_TSSI_MASK_11BG;
 1216 
 1217         rf->rf_idle_tssi0 = (int)__SHIFTOUT(val, mask);
 1218         if (!IS_VALID_PA_PARAM(rf->rf_idle_tssi0))
 1219                 rf->rf_idle_tssi0 = 62;
 1220 
 1221 #undef IS_VALID_PA_PARAM
 1222 
 1223         /*
 1224          * Calculate TX power map, which is indexed by TSSI
 1225          */
 1226         DPRINTF(sc, BWI_DBG_RF | BWI_DBG_ATTACH | BWI_DBG_TXPOWER,
 1227                 "%s\n", "TSSI-TX power map:");
 1228         for (i = 0; i < BWI_TSSI_MAX; ++i) {
 1229                 error = bwi_rf_calc_txpower(&rf->rf_txpower_map0[i], i,
 1230                                             pa_params);
 1231                 if (error) {
 1232                         device_printf(sc->sc_dev,
 1233                                   "bwi_rf_calc_txpower failed\n");
 1234                         break;
 1235                 }
 1236 
 1237 #ifdef BWI_DEBUG
 1238                 if (i != 0 && i % 8 == 0) {
 1239                         _DPRINTF(sc,
 1240                         BWI_DBG_RF | BWI_DBG_ATTACH | BWI_DBG_TXPOWER,
 1241                         "%s\n", "");
 1242                 }
 1243 #endif
 1244                 _DPRINTF(sc, BWI_DBG_RF | BWI_DBG_ATTACH | BWI_DBG_TXPOWER,
 1245                          "%d ", rf->rf_txpower_map0[i]);
 1246         }
 1247         _DPRINTF(sc, BWI_DBG_RF | BWI_DBG_ATTACH | BWI_DBG_TXPOWER,
 1248                  "%s\n", "");
 1249 back:
 1250         DPRINTF(sc, BWI_DBG_RF | BWI_DBG_TXPOWER | BWI_DBG_ATTACH,
 1251                 "idle tssi0: %d\n", rf->rf_idle_tssi0);
 1252         return error;
 1253 }
 1254 
 1255 static void
 1256 bwi_rf_lo_update_11g(struct bwi_mac *mac)
 1257 {
 1258         struct bwi_softc *sc = mac->mac_sc;
 1259         struct bwi_rf *rf = &mac->mac_rf;
 1260         struct bwi_phy *phy = &mac->mac_phy;
 1261         struct bwi_tpctl *tpctl = &mac->mac_tpctl;
 1262         struct rf_saveregs regs;
 1263         uint16_t ant_div, chan_ex;
 1264         uint8_t devi_ctrl;
 1265         u_int orig_chan;
 1266 
 1267         /*
 1268          * Save RF/PHY registers for later restoration
 1269          */
 1270         orig_chan = rf->rf_curchan;
 1271         bzero(&regs, sizeof(regs));
 1272 
 1273         if (phy->phy_flags & BWI_PHY_F_LINKED) {
 1274                 SAVE_PHY_REG(mac, &regs, 429);
 1275                 SAVE_PHY_REG(mac, &regs, 802);
 1276 
 1277                 PHY_WRITE(mac, 0x429, regs.phy_429 & 0x7fff);
 1278                 PHY_WRITE(mac, 0x802, regs.phy_802 & 0xfffc);
 1279         }
 1280 
 1281         ant_div = CSR_READ_2(sc, BWI_RF_ANTDIV);
 1282         CSR_WRITE_2(sc, BWI_RF_ANTDIV, ant_div | 0x8000);
 1283         chan_ex = CSR_READ_2(sc, BWI_RF_CHAN_EX);
 1284 
 1285         SAVE_PHY_REG(mac, &regs, 15);
 1286         SAVE_PHY_REG(mac, &regs, 2a);
 1287         SAVE_PHY_REG(mac, &regs, 35);
 1288         SAVE_PHY_REG(mac, &regs, 60);
 1289         SAVE_RF_REG(mac, &regs, 43);
 1290         SAVE_RF_REG(mac, &regs, 7a);
 1291         SAVE_RF_REG(mac, &regs, 52);
 1292         if (phy->phy_flags & BWI_PHY_F_LINKED) {
 1293                 SAVE_PHY_REG(mac, &regs, 811);
 1294                 SAVE_PHY_REG(mac, &regs, 812);
 1295                 SAVE_PHY_REG(mac, &regs, 814);
 1296                 SAVE_PHY_REG(mac, &regs, 815);
 1297         }
 1298 
 1299         /* Force to channel 6 */
 1300         bwi_rf_set_chan(mac, 6, 0);
 1301 
 1302         if (phy->phy_flags & BWI_PHY_F_LINKED) {
 1303                 PHY_WRITE(mac, 0x429, regs.phy_429 & 0x7fff);
 1304                 PHY_WRITE(mac, 0x802, regs.phy_802 & 0xfffc);
 1305                 bwi_mac_dummy_xmit(mac);
 1306         }
 1307         RF_WRITE(mac, 0x43, 0x6);
 1308 
 1309         bwi_phy_set_bbp_atten(mac, 2);
 1310 
 1311         CSR_WRITE_2(sc, BWI_RF_CHAN_EX, 0);
 1312 
 1313         PHY_WRITE(mac, 0x2e, 0x7f);
 1314         PHY_WRITE(mac, 0x80f, 0x78);
 1315         PHY_WRITE(mac, 0x35, regs.phy_35 & 0xff7f);
 1316         RF_WRITE(mac, 0x7a, regs.rf_7a & 0xfff0);
 1317         PHY_WRITE(mac, 0x2b, 0x203);
 1318         PHY_WRITE(mac, 0x2a, 0x8a3);
 1319 
 1320         if (phy->phy_flags & BWI_PHY_F_LINKED) {
 1321                 PHY_WRITE(mac, 0x814, regs.phy_814 | 0x3);
 1322                 PHY_WRITE(mac, 0x815, regs.phy_815 & 0xfffc);
 1323                 PHY_WRITE(mac, 0x811, 0x1b3);
 1324                 PHY_WRITE(mac, 0x812, 0xb2);
 1325         }
 1326 
 1327         if ((sc->sc_flags & BWI_F_RUNNING) == 0)
 1328                 tpctl->tp_ctrl2 = bwi_rf_get_tp_ctrl2(mac);
 1329         PHY_WRITE(mac, 0x80f, 0x8078);
 1330 
 1331         /*
 1332          * Measure all RF LO
 1333          */
 1334         devi_ctrl = _bwi_rf_lo_update_11g(mac, regs.rf_7a);
 1335 
 1336         /*
 1337          * Restore saved RF/PHY registers
 1338          */
 1339         if (phy->phy_flags & BWI_PHY_F_LINKED) {
 1340                 PHY_WRITE(mac, 0x15, 0xe300);
 1341                 PHY_WRITE(mac, 0x812, (devi_ctrl << 8) | 0xa0);
 1342                 DELAY(5);
 1343                 PHY_WRITE(mac, 0x812, (devi_ctrl << 8) | 0xa2);
 1344                 DELAY(2);
 1345                 PHY_WRITE(mac, 0x812, (devi_ctrl << 8) | 0xa3);
 1346         } else {
 1347                 PHY_WRITE(mac, 0x15, devi_ctrl | 0xefa0);
 1348         }
 1349 
 1350         if ((sc->sc_flags & BWI_F_RUNNING) == 0)
 1351                 tpctl = NULL;
 1352         bwi_rf_lo_adjust(mac, tpctl);
 1353 
 1354         PHY_WRITE(mac, 0x2e, 0x807f);
 1355         if (phy->phy_flags & BWI_PHY_F_LINKED)
 1356                 PHY_WRITE(mac, 0x2f, 0x202);
 1357         else
 1358                 PHY_WRITE(mac, 0x2f, 0x101);
 1359 
 1360         CSR_WRITE_2(sc, BWI_RF_CHAN_EX, chan_ex);
 1361 
 1362         RESTORE_PHY_REG(mac, &regs, 15);
 1363         RESTORE_PHY_REG(mac, &regs, 2a);
 1364         RESTORE_PHY_REG(mac, &regs, 35);
 1365         RESTORE_PHY_REG(mac, &regs, 60);
 1366 
 1367         RESTORE_RF_REG(mac, &regs, 43);
 1368         RESTORE_RF_REG(mac, &regs, 7a);
 1369 
 1370         regs.rf_52 &= 0xf0;
 1371         regs.rf_52 |= (RF_READ(mac, 0x52) & 0xf);
 1372         RF_WRITE(mac, 0x52, regs.rf_52);
 1373 
 1374         CSR_WRITE_2(sc, BWI_RF_ANTDIV, ant_div);
 1375 
 1376         if (phy->phy_flags & BWI_PHY_F_LINKED) {
 1377                 RESTORE_PHY_REG(mac, &regs, 811);
 1378                 RESTORE_PHY_REG(mac, &regs, 812);
 1379                 RESTORE_PHY_REG(mac, &regs, 814);
 1380                 RESTORE_PHY_REG(mac, &regs, 815);
 1381                 RESTORE_PHY_REG(mac, &regs, 429);
 1382                 RESTORE_PHY_REG(mac, &regs, 802);
 1383         }
 1384 
 1385         bwi_rf_set_chan(mac, orig_chan, 1);
 1386 }
 1387 
 1388 static uint32_t
 1389 bwi_rf_lo_devi_measure(struct bwi_mac *mac, uint16_t ctrl)
 1390 {
 1391         struct bwi_phy *phy = &mac->mac_phy;
 1392         uint32_t devi = 0;
 1393         int i;
 1394 
 1395         if (phy->phy_flags & BWI_PHY_F_LINKED)
 1396                 ctrl <<= 8;
 1397 
 1398         for (i = 0; i < 8; ++i) {
 1399                 if (phy->phy_flags & BWI_PHY_F_LINKED) {
 1400                         PHY_WRITE(mac, 0x15, 0xe300);
 1401                         PHY_WRITE(mac, 0x812, ctrl | 0xb0);
 1402                         DELAY(5);
 1403                         PHY_WRITE(mac, 0x812, ctrl | 0xb2);
 1404                         DELAY(2);
 1405                         PHY_WRITE(mac, 0x812, ctrl | 0xb3);
 1406                         DELAY(4);
 1407                         PHY_WRITE(mac, 0x15, 0xf300);
 1408                 } else {
 1409                         PHY_WRITE(mac, 0x15, ctrl | 0xefa0);
 1410                         DELAY(2);
 1411                         PHY_WRITE(mac, 0x15, ctrl | 0xefe0);
 1412                         DELAY(4);
 1413                         PHY_WRITE(mac, 0x15, ctrl | 0xffe0);
 1414                 }
 1415                 DELAY(8);
 1416                 devi += PHY_READ(mac, 0x2d);
 1417         }
 1418         return devi;
 1419 }
 1420 
 1421 static uint16_t
 1422 bwi_rf_get_tp_ctrl2(struct bwi_mac *mac)
 1423 {
 1424         uint32_t devi_min;
 1425         uint16_t tp_ctrl2 = 0;
 1426         int i;
 1427 
 1428         RF_WRITE(mac, 0x52, 0);
 1429         DELAY(10);
 1430         devi_min = bwi_rf_lo_devi_measure(mac, 0);
 1431 
 1432         for (i = 0; i < 16; ++i) {
 1433                 uint32_t devi;
 1434 
 1435                 RF_WRITE(mac, 0x52, i);
 1436                 DELAY(10);
 1437                 devi = bwi_rf_lo_devi_measure(mac, 0);
 1438 
 1439                 if (devi < devi_min) {
 1440                         devi_min = devi;
 1441                         tp_ctrl2 = i;
 1442                 }
 1443         }
 1444         return tp_ctrl2;
 1445 }
 1446 
 1447 static uint8_t
 1448 _bwi_rf_lo_update_11g(struct bwi_mac *mac, uint16_t orig_rf7a)
 1449 {
 1450 #define RF_ATTEN_LISTSZ 14
 1451 #define BBP_ATTEN_MAX   4       /* half */
 1452 
 1453         static const int rf_atten_list[RF_ATTEN_LISTSZ] =
 1454         { 3, 1, 5, 7, 9, 2, 0, 4, 6, 8, 1, 2, 3, 4 };
 1455         static const int rf_atten_init_list[RF_ATTEN_LISTSZ] =
 1456         { 0, 3, 1, 5, 7, 3, 2, 0, 4, 6, -1, -1, -1, -1 };
 1457         static const int rf_lo_measure_order[RF_ATTEN_LISTSZ] =
 1458         { 3, 1, 5, 7, 9, 2, 0, 4, 6, 8, 10, 11, 12, 13 };
 1459 
 1460         struct bwi_softc *sc = mac->mac_sc;
 1461         struct bwi_rf_lo lo_save, *lo;
 1462         uint8_t devi_ctrl = 0;
 1463         int idx, adj_rf7a = 0;
 1464 
 1465         bzero(&lo_save, sizeof(lo_save));
 1466         for (idx = 0; idx < RF_ATTEN_LISTSZ; ++idx) {
 1467                 int init_rf_atten = rf_atten_init_list[idx];
 1468                 int rf_atten = rf_atten_list[idx];
 1469                 int bbp_atten;
 1470 
 1471                 for (bbp_atten = 0; bbp_atten < BBP_ATTEN_MAX; ++bbp_atten) {
 1472                         uint16_t tp_ctrl2, rf7a;
 1473 
 1474                         if ((sc->sc_flags & BWI_F_RUNNING) == 0) {
 1475                                 if (idx == 0) {
 1476                                         bzero(&lo_save, sizeof(lo_save));
 1477                                 } else if (init_rf_atten < 0) {
 1478                                         lo = bwi_get_rf_lo(mac,
 1479                                                 rf_atten, 2 * bbp_atten);
 1480                                         bcopy(lo, &lo_save, sizeof(lo_save));
 1481                                 } else {
 1482                                         lo = bwi_get_rf_lo(mac,
 1483                                                 init_rf_atten, 0);
 1484                                         bcopy(lo, &lo_save, sizeof(lo_save));
 1485                                 }
 1486 
 1487                                 devi_ctrl = 0;
 1488                                 adj_rf7a = 0;
 1489 
 1490                                 /*
 1491                                  * XXX
 1492                                  * Linux driver overflows 'val'
 1493                                  */
 1494                                 if (init_rf_atten >= 0) {
 1495                                         int val;
 1496 
 1497                                         val = rf_atten * 2 + bbp_atten;
 1498                                         if (val > 14) {
 1499                                                 adj_rf7a = 1;
 1500                                                 if (val > 17)
 1501                                                         devi_ctrl = 1;
 1502                                                 if (val > 19)
 1503                                                         devi_ctrl = 2;
 1504                                         }
 1505                                 }
 1506                         } else {
 1507                                 lo = bwi_get_rf_lo(mac,
 1508                                         rf_atten, 2 * bbp_atten);
 1509                                 if (!bwi_rf_lo_isused(mac, lo))
 1510                                         continue;
 1511                                 bcopy(lo, &lo_save, sizeof(lo_save));
 1512 
 1513                                 devi_ctrl = 3;
 1514                                 adj_rf7a = 0;
 1515                         }
 1516 
 1517                         RF_WRITE(mac, BWI_RFR_ATTEN, rf_atten);
 1518 
 1519                         tp_ctrl2 = mac->mac_tpctl.tp_ctrl2;
 1520                         if (init_rf_atten < 0)
 1521                                 tp_ctrl2 |= (3 << 4);
 1522                         RF_WRITE(mac, BWI_RFR_TXPWR, tp_ctrl2);
 1523 
 1524                         DELAY(10);
 1525 
 1526                         bwi_phy_set_bbp_atten(mac, bbp_atten * 2);
 1527 
 1528                         rf7a = orig_rf7a & 0xfff0;
 1529                         if (adj_rf7a)
 1530                                 rf7a |= 0x8;
 1531                         RF_WRITE(mac, 0x7a, rf7a);
 1532 
 1533                         lo = bwi_get_rf_lo(mac,
 1534                                 rf_lo_measure_order[idx], bbp_atten * 2);
 1535                         bwi_rf_lo_measure_11g(mac, &lo_save, lo, devi_ctrl);
 1536                 }
 1537         }
 1538         return devi_ctrl;
 1539 
 1540 #undef RF_ATTEN_LISTSZ
 1541 #undef BBP_ATTEN_MAX
 1542 }
 1543 
 1544 static void
 1545 bwi_rf_lo_measure_11g(struct bwi_mac *mac, const struct bwi_rf_lo *src_lo,
 1546         struct bwi_rf_lo *dst_lo, uint8_t devi_ctrl)
 1547 {
 1548 #define LO_ADJUST_MIN   1
 1549 #define LO_ADJUST_MAX   8
 1550 #define LO_ADJUST(hi, lo)       { .ctrl_hi = hi, .ctrl_lo = lo }
 1551         static const struct bwi_rf_lo rf_lo_adjust[LO_ADJUST_MAX] = {
 1552                 LO_ADJUST(1,    1),
 1553                 LO_ADJUST(1,    0),
 1554                 LO_ADJUST(1,    -1),
 1555                 LO_ADJUST(0,    -1),
 1556                 LO_ADJUST(-1,   -1),
 1557                 LO_ADJUST(-1,   0),
 1558                 LO_ADJUST(-1,   1),
 1559                 LO_ADJUST(0,    1)
 1560         };
 1561 #undef LO_ADJUST
 1562 
 1563         struct bwi_rf_lo lo_min;
 1564         uint32_t devi_min;
 1565         int found, loop_count, adjust_state;
 1566 
 1567         bcopy(src_lo, &lo_min, sizeof(lo_min));
 1568         RF_LO_WRITE(mac, &lo_min);
 1569         devi_min = bwi_rf_lo_devi_measure(mac, devi_ctrl);
 1570 
 1571         loop_count = 12;        /* XXX */
 1572         adjust_state = 0;
 1573         do {
 1574                 struct bwi_rf_lo lo_base;
 1575                 int i, fin;
 1576 
 1577                 found = 0;
 1578                 if (adjust_state == 0) {
 1579                         i = LO_ADJUST_MIN;
 1580                         fin = LO_ADJUST_MAX;
 1581                 } else if (adjust_state % 2 == 0) {
 1582                         i = adjust_state - 1;
 1583                         fin = adjust_state + 1;
 1584                 } else {
 1585                         i = adjust_state - 2;
 1586                         fin = adjust_state + 2;
 1587                 }
 1588 
 1589                 if (i < LO_ADJUST_MIN)
 1590                         i += LO_ADJUST_MAX;
 1591                 KASSERT(i <= LO_ADJUST_MAX && i >= LO_ADJUST_MIN, ("i %d", i));
 1592 
 1593                 if (fin > LO_ADJUST_MAX)
 1594                         fin -= LO_ADJUST_MAX;
 1595                 KASSERT(fin <= LO_ADJUST_MAX && fin >= LO_ADJUST_MIN,
 1596                     ("fin %d", fin));
 1597 
 1598                 bcopy(&lo_min, &lo_base, sizeof(lo_base));
 1599                 for (;;) {
 1600                         struct bwi_rf_lo lo;
 1601 
 1602                         lo.ctrl_hi = lo_base.ctrl_hi +
 1603                                 rf_lo_adjust[i - 1].ctrl_hi;
 1604                         lo.ctrl_lo = lo_base.ctrl_lo +
 1605                                 rf_lo_adjust[i - 1].ctrl_lo;
 1606 
 1607                         if (abs(lo.ctrl_lo) < 9 && abs(lo.ctrl_hi) < 9) {
 1608                                 uint32_t devi;
 1609 
 1610                                 RF_LO_WRITE(mac, &lo);
 1611                                 devi = bwi_rf_lo_devi_measure(mac, devi_ctrl);
 1612                                 if (devi < devi_min) {
 1613                                         devi_min = devi;
 1614                                         adjust_state = i;
 1615                                         found = 1;
 1616                                         bcopy(&lo, &lo_min, sizeof(lo_min));
 1617                                 }
 1618                         }
 1619                         if (i == fin)
 1620                                 break;
 1621                         if (i == LO_ADJUST_MAX)
 1622                                 i = LO_ADJUST_MIN;
 1623                         else
 1624                                 ++i;
 1625                 }
 1626         } while (loop_count-- && found);
 1627 
 1628         bcopy(&lo_min, dst_lo, sizeof(*dst_lo));
 1629 
 1630 #undef LO_ADJUST_MIN
 1631 #undef LO_ADJUST_MAX
 1632 }
 1633 
 1634 static void
 1635 bwi_rf_calc_nrssi_slope_11b(struct bwi_mac *mac)
 1636 {
 1637 #define SAVE_RF_MAX     3
 1638 #define SAVE_PHY_MAX    8
 1639 
 1640         static const uint16_t save_rf_regs[SAVE_RF_MAX] =
 1641         { 0x7a, 0x52, 0x43 };
 1642         static const uint16_t save_phy_regs[SAVE_PHY_MAX] =
 1643         { 0x30, 0x26, 0x15, 0x2a, 0x20, 0x5a, 0x59, 0x58 };
 1644 
 1645         struct bwi_softc *sc = mac->mac_sc;
 1646         struct bwi_rf *rf = &mac->mac_rf;
 1647         struct bwi_phy *phy = &mac->mac_phy;
 1648         uint16_t save_rf[SAVE_RF_MAX];
 1649         uint16_t save_phy[SAVE_PHY_MAX];
 1650         uint16_t ant_div, bbp_atten, chan_ex;
 1651         int16_t nrssi[2];
 1652         int i;
 1653 
 1654         /*
 1655          * Save RF/PHY registers for later restoration
 1656          */
 1657         for (i = 0; i < SAVE_RF_MAX; ++i)
 1658                 save_rf[i] = RF_READ(mac, save_rf_regs[i]);
 1659         for (i = 0; i < SAVE_PHY_MAX; ++i)
 1660                 save_phy[i] = PHY_READ(mac, save_phy_regs[i]);
 1661 
 1662         ant_div = CSR_READ_2(sc, BWI_RF_ANTDIV);
 1663         bbp_atten = CSR_READ_2(sc, BWI_BBP_ATTEN);
 1664         chan_ex = CSR_READ_2(sc, BWI_RF_CHAN_EX);
 1665 
 1666         /*
 1667          * Calculate nrssi0
 1668          */
 1669         if (phy->phy_rev >= 5)
 1670                 RF_CLRBITS(mac, 0x7a, 0xff80);
 1671         else
 1672                 RF_CLRBITS(mac, 0x7a, 0xfff0);
 1673         PHY_WRITE(mac, 0x30, 0xff);
 1674 
 1675         CSR_WRITE_2(sc, BWI_BPHY_CTRL, 0x7f7f);
 1676 
 1677         PHY_WRITE(mac, 0x26, 0);
 1678         PHY_SETBITS(mac, 0x15, 0x20);
 1679         PHY_WRITE(mac, 0x2a, 0x8a3);
 1680         RF_SETBITS(mac, 0x7a, 0x80);
 1681 
 1682         nrssi[0] = (int16_t)PHY_READ(mac, 0x27);
 1683 
 1684         /*
 1685          * Calculate nrssi1
 1686          */
 1687         RF_CLRBITS(mac, 0x7a, 0xff80);
 1688         if (phy->phy_version >= 2)
 1689                 CSR_WRITE_2(sc, BWI_BBP_ATTEN, 0x40);
 1690         else if (phy->phy_version == 0)
 1691                 CSR_WRITE_2(sc, BWI_BBP_ATTEN, 0x122);
 1692         else
 1693                 CSR_CLRBITS_2(sc, BWI_RF_CHAN_EX, 0xdfff);
 1694 
 1695         PHY_WRITE(mac, 0x20, 0x3f3f);
 1696         PHY_WRITE(mac, 0x15, 0xf330);
 1697 
 1698         RF_WRITE(mac, 0x5a, 0x60);
 1699         RF_CLRBITS(mac, 0x43, 0xff0f);
 1700 
 1701         PHY_WRITE(mac, 0x5a, 0x480);
 1702         PHY_WRITE(mac, 0x59, 0x810);
 1703         PHY_WRITE(mac, 0x58, 0xd);
 1704 
 1705         DELAY(20);
 1706 
 1707         nrssi[1] = (int16_t)PHY_READ(mac, 0x27);
 1708 
 1709         /*
 1710          * Restore saved RF/PHY registers
 1711          */
 1712         PHY_WRITE(mac, save_phy_regs[0], save_phy[0]);
 1713         RF_WRITE(mac, save_rf_regs[0], save_rf[0]);
 1714 
 1715         CSR_WRITE_2(sc, BWI_RF_ANTDIV, ant_div);
 1716 
 1717         for (i = 1; i < 4; ++i)
 1718                 PHY_WRITE(mac, save_phy_regs[i], save_phy[i]);
 1719 
 1720         bwi_rf_work_around(mac, rf->rf_curchan);
 1721 
 1722         if (phy->phy_version != 0)
 1723                 CSR_WRITE_2(sc, BWI_RF_CHAN_EX, chan_ex);
 1724 
 1725         for (; i < SAVE_PHY_MAX; ++i)
 1726                 PHY_WRITE(mac, save_phy_regs[i], save_phy[i]);
 1727 
 1728         for (i = 1; i < SAVE_RF_MAX; ++i)
 1729                 RF_WRITE(mac, save_rf_regs[i], save_rf[i]);
 1730 
 1731         /*
 1732          * Install calculated narrow RSSI values
 1733          */
 1734         if (nrssi[0] == nrssi[1])
 1735                 rf->rf_nrssi_slope = 0x10000;
 1736         else
 1737                 rf->rf_nrssi_slope = 0x400000 / (nrssi[0] - nrssi[1]);
 1738         if (nrssi[0] <= -4) {
 1739                 rf->rf_nrssi[0] = nrssi[0];
 1740                 rf->rf_nrssi[1] = nrssi[1];
 1741         }
 1742 
 1743 #undef SAVE_RF_MAX
 1744 #undef SAVE_PHY_MAX
 1745 }
 1746 
 1747 static void
 1748 bwi_rf_set_nrssi_ofs_11g(struct bwi_mac *mac)
 1749 {
 1750 #define SAVE_RF_MAX             2
 1751 #define SAVE_PHY_COMM_MAX       10
 1752 #define SAVE_PHY6_MAX           8
 1753 
 1754         static const uint16_t save_rf_regs[SAVE_RF_MAX] =
 1755         { 0x7a, 0x43 };
 1756         static const uint16_t save_phy_comm_regs[SAVE_PHY_COMM_MAX] = {
 1757                 0x0001, 0x0811, 0x0812, 0x0814,
 1758                 0x0815, 0x005a, 0x0059, 0x0058,
 1759                 0x000a, 0x0003
 1760         };
 1761         static const uint16_t save_phy6_regs[SAVE_PHY6_MAX] = {
 1762                 0x002e, 0x002f, 0x080f, 0x0810,
 1763                 0x0801, 0x0060, 0x0014, 0x0478
 1764         };
 1765 
 1766         struct bwi_phy *phy = &mac->mac_phy;
 1767         uint16_t save_rf[SAVE_RF_MAX];
 1768         uint16_t save_phy_comm[SAVE_PHY_COMM_MAX];
 1769         uint16_t save_phy6[SAVE_PHY6_MAX];
 1770         uint16_t rf7b = 0xffff;
 1771         int16_t nrssi;
 1772         int i, phy6_idx = 0;
 1773 
 1774         for (i = 0; i < SAVE_PHY_COMM_MAX; ++i)
 1775                 save_phy_comm[i] = PHY_READ(mac, save_phy_comm_regs[i]);
 1776         for (i = 0; i < SAVE_RF_MAX; ++i)
 1777                 save_rf[i] = RF_READ(mac, save_rf_regs[i]);
 1778 
 1779         PHY_CLRBITS(mac, 0x429, 0x8000);
 1780         PHY_FILT_SETBITS(mac, 0x1, 0x3fff, 0x4000);
 1781         PHY_SETBITS(mac, 0x811, 0xc);
 1782         PHY_FILT_SETBITS(mac, 0x812, 0xfff3, 0x4);
 1783         PHY_CLRBITS(mac, 0x802, 0x3);
 1784 
 1785         if (phy->phy_rev >= 6) {
 1786                 for (i = 0; i < SAVE_PHY6_MAX; ++i)
 1787                         save_phy6[i] = PHY_READ(mac, save_phy6_regs[i]);
 1788 
 1789                 PHY_WRITE(mac, 0x2e, 0);
 1790                 PHY_WRITE(mac, 0x2f, 0);
 1791                 PHY_WRITE(mac, 0x80f, 0);
 1792                 PHY_WRITE(mac, 0x810, 0);
 1793                 PHY_SETBITS(mac, 0x478, 0x100);
 1794                 PHY_SETBITS(mac, 0x801, 0x40);
 1795                 PHY_SETBITS(mac, 0x60, 0x40);
 1796                 PHY_SETBITS(mac, 0x14, 0x200);
 1797         }
 1798 
 1799         RF_SETBITS(mac, 0x7a, 0x70);
 1800         RF_SETBITS(mac, 0x7a, 0x80);
 1801 
 1802         DELAY(30);
 1803 
 1804         nrssi = bwi_nrssi_11g(mac);
 1805         if (nrssi == 31) {
 1806                 for (i = 7; i >= 4; --i) {
 1807                         RF_WRITE(mac, 0x7b, i);
 1808                         DELAY(20);
 1809                         nrssi = bwi_nrssi_11g(mac);
 1810                         if (nrssi < 31 && rf7b == 0xffff)
 1811                                 rf7b = i;
 1812                 }
 1813                 if (rf7b == 0xffff)
 1814                         rf7b = 4;
 1815         } else {
 1816                 struct bwi_gains gains;
 1817 
 1818                 RF_CLRBITS(mac, 0x7a, 0xff80);
 1819 
 1820                 PHY_SETBITS(mac, 0x814, 0x1);
 1821                 PHY_CLRBITS(mac, 0x815, 0x1);
 1822                 PHY_SETBITS(mac, 0x811, 0xc);
 1823                 PHY_SETBITS(mac, 0x812, 0xc);
 1824                 PHY_SETBITS(mac, 0x811, 0x30);
 1825                 PHY_SETBITS(mac, 0x812, 0x30);
 1826                 PHY_WRITE(mac, 0x5a, 0x480);
 1827                 PHY_WRITE(mac, 0x59, 0x810);
 1828                 PHY_WRITE(mac, 0x58, 0xd);
 1829                 if (phy->phy_version == 0)
 1830                         PHY_WRITE(mac, 0x3, 0x122);
 1831                 else
 1832                         PHY_SETBITS(mac, 0xa, 0x2000);
 1833                 PHY_SETBITS(mac, 0x814, 0x4);
 1834                 PHY_CLRBITS(mac, 0x815, 0x4);
 1835                 PHY_FILT_SETBITS(mac, 0x3, 0xff9f, 0x40);
 1836                 RF_SETBITS(mac, 0x7a, 0xf);
 1837 
 1838                 bzero(&gains, sizeof(gains));
 1839                 gains.tbl_gain1 = 3;
 1840                 gains.tbl_gain2 = 0;
 1841                 gains.phy_gain = 1;
 1842                 bwi_set_gains(mac, &gains);
 1843 
 1844                 RF_FILT_SETBITS(mac, 0x43, 0xf0, 0xf);
 1845                 DELAY(30);
 1846 
 1847                 nrssi = bwi_nrssi_11g(mac);
 1848                 if (nrssi == -32) {
 1849                         for (i = 0; i < 4; ++i) {
 1850                                 RF_WRITE(mac, 0x7b, i);
 1851                                 DELAY(20);
 1852                                 nrssi = bwi_nrssi_11g(mac);
 1853                                 if (nrssi > -31 && rf7b == 0xffff)
 1854                                         rf7b = i;
 1855                         }
 1856                         if (rf7b == 0xffff)
 1857                                 rf7b = 3;
 1858                 } else {
 1859                         rf7b = 0;
 1860                 }
 1861         }
 1862         RF_WRITE(mac, 0x7b, rf7b);
 1863 
 1864         /*
 1865          * Restore saved RF/PHY registers
 1866          */
 1867         if (phy->phy_rev >= 6) {
 1868                 for (phy6_idx = 0; phy6_idx < 4; ++phy6_idx) {
 1869                         PHY_WRITE(mac, save_phy6_regs[phy6_idx],
 1870                                   save_phy6[phy6_idx]);
 1871                 }
 1872         }
 1873 
 1874         /* Saved PHY registers 0, 1, 2 are handled later */
 1875         for (i = 3; i < SAVE_PHY_COMM_MAX; ++i)
 1876                 PHY_WRITE(mac, save_phy_comm_regs[i], save_phy_comm[i]);
 1877 
 1878         for (i = SAVE_RF_MAX - 1; i >= 0; --i)
 1879                 RF_WRITE(mac, save_rf_regs[i], save_rf[i]);
 1880 
 1881         PHY_SETBITS(mac, 0x802, 0x3);
 1882         PHY_SETBITS(mac, 0x429, 0x8000);
 1883 
 1884         bwi_set_gains(mac, NULL);
 1885 
 1886         if (phy->phy_rev >= 6) {
 1887                 for (; phy6_idx < SAVE_PHY6_MAX; ++phy6_idx) {
 1888                         PHY_WRITE(mac, save_phy6_regs[phy6_idx],
 1889                                   save_phy6[phy6_idx]);
 1890                 }
 1891         }
 1892 
 1893         PHY_WRITE(mac, save_phy_comm_regs[0], save_phy_comm[0]);
 1894         PHY_WRITE(mac, save_phy_comm_regs[2], save_phy_comm[2]);
 1895         PHY_WRITE(mac, save_phy_comm_regs[1], save_phy_comm[1]);
 1896 
 1897 #undef SAVE_RF_MAX
 1898 #undef SAVE_PHY_COMM_MAX
 1899 #undef SAVE_PHY6_MAX
 1900 }
 1901 
 1902 static void
 1903 bwi_rf_calc_nrssi_slope_11g(struct bwi_mac *mac)
 1904 {
 1905 #define SAVE_RF_MAX             3
 1906 #define SAVE_PHY_COMM_MAX       4
 1907 #define SAVE_PHY3_MAX           8
 1908 
 1909         static const uint16_t save_rf_regs[SAVE_RF_MAX] =
 1910         { 0x7a, 0x52, 0x43 };
 1911         static const uint16_t save_phy_comm_regs[SAVE_PHY_COMM_MAX] =
 1912         { 0x15, 0x5a, 0x59, 0x58 };
 1913         static const uint16_t save_phy3_regs[SAVE_PHY3_MAX] = {
 1914                 0x002e, 0x002f, 0x080f, 0x0810,
 1915                 0x0801, 0x0060, 0x0014, 0x0478
 1916         };
 1917 
 1918         struct bwi_softc *sc = mac->mac_sc;
 1919         struct bwi_phy *phy = &mac->mac_phy;
 1920         struct bwi_rf *rf = &mac->mac_rf;
 1921         uint16_t save_rf[SAVE_RF_MAX];
 1922         uint16_t save_phy_comm[SAVE_PHY_COMM_MAX];
 1923         uint16_t save_phy3[SAVE_PHY3_MAX];
 1924         uint16_t ant_div, bbp_atten, chan_ex;
 1925         struct bwi_gains gains;
 1926         int16_t nrssi[2];
 1927         int i, phy3_idx = 0;
 1928 
 1929         if (rf->rf_rev >= 9)
 1930                 return;
 1931         else if (rf->rf_rev == 8)
 1932                 bwi_rf_set_nrssi_ofs_11g(mac);
 1933 
 1934         PHY_CLRBITS(mac, 0x429, 0x8000);
 1935         PHY_CLRBITS(mac, 0x802, 0x3);
 1936 
 1937         /*
 1938          * Save RF/PHY registers for later restoration
 1939          */
 1940         ant_div = CSR_READ_2(sc, BWI_RF_ANTDIV);
 1941         CSR_SETBITS_2(sc, BWI_RF_ANTDIV, 0x8000);
 1942 
 1943         for (i = 0; i < SAVE_RF_MAX; ++i)
 1944                 save_rf[i] = RF_READ(mac, save_rf_regs[i]);
 1945         for (i = 0; i < SAVE_PHY_COMM_MAX; ++i)
 1946                 save_phy_comm[i] = PHY_READ(mac, save_phy_comm_regs[i]);
 1947 
 1948         bbp_atten = CSR_READ_2(sc, BWI_BBP_ATTEN);
 1949         chan_ex = CSR_READ_2(sc, BWI_RF_CHAN_EX);
 1950 
 1951         if (phy->phy_rev >= 3) {
 1952                 for (i = 0; i < SAVE_PHY3_MAX; ++i)
 1953                         save_phy3[i] = PHY_READ(mac, save_phy3_regs[i]);
 1954 
 1955                 PHY_WRITE(mac, 0x2e, 0);
 1956                 PHY_WRITE(mac, 0x810, 0);
 1957 
 1958                 if (phy->phy_rev == 4 || phy->phy_rev == 6 ||
 1959                     phy->phy_rev == 7) {
 1960                         PHY_SETBITS(mac, 0x478, 0x100);
 1961                         PHY_SETBITS(mac, 0x810, 0x40);
 1962                 } else if (phy->phy_rev == 3 || phy->phy_rev == 5) {
 1963                         PHY_CLRBITS(mac, 0x810, 0x40);
 1964                 }
 1965 
 1966                 PHY_SETBITS(mac, 0x60, 0x40);
 1967                 PHY_SETBITS(mac, 0x14, 0x200);
 1968         }
 1969 
 1970         /*
 1971          * Calculate nrssi0
 1972          */
 1973         RF_SETBITS(mac, 0x7a, 0x70);
 1974 
 1975         bzero(&gains, sizeof(gains));
 1976         gains.tbl_gain1 = 0;
 1977         gains.tbl_gain2 = 8;
 1978         gains.phy_gain = 0;
 1979         bwi_set_gains(mac, &gains);
 1980 
 1981         RF_CLRBITS(mac, 0x7a, 0xff08);
 1982         if (phy->phy_rev >= 2) {
 1983                 PHY_FILT_SETBITS(mac, 0x811, 0xffcf, 0x30);
 1984                 PHY_FILT_SETBITS(mac, 0x812, 0xffcf, 0x10);
 1985         }
 1986 
 1987         RF_SETBITS(mac, 0x7a, 0x80);
 1988         DELAY(20);
 1989         nrssi[0] = bwi_nrssi_11g(mac);
 1990 
 1991         /*
 1992          * Calculate nrssi1
 1993          */
 1994         RF_CLRBITS(mac, 0x7a, 0xff80);
 1995         if (phy->phy_version >= 2)
 1996                 PHY_FILT_SETBITS(mac, 0x3, 0xff9f, 0x40);
 1997         CSR_SETBITS_2(sc, BWI_RF_CHAN_EX, 0x2000);
 1998 
 1999         RF_SETBITS(mac, 0x7a, 0xf);
 2000         PHY_WRITE(mac, 0x15, 0xf330);
 2001         if (phy->phy_rev >= 2) {
 2002                 PHY_FILT_SETBITS(mac, 0x812, 0xffcf, 0x20);
 2003                 PHY_FILT_SETBITS(mac, 0x811, 0xffcf, 0x20);
 2004         }
 2005 
 2006         bzero(&gains, sizeof(gains));
 2007         gains.tbl_gain1 = 3;
 2008         gains.tbl_gain2 = 0;
 2009         gains.phy_gain = 1;
 2010         bwi_set_gains(mac, &gains);
 2011 
 2012         if (rf->rf_rev == 8) {
 2013                 RF_WRITE(mac, 0x43, 0x1f);
 2014         } else {
 2015                 RF_FILT_SETBITS(mac, 0x52, 0xff0f, 0x60);
 2016                 RF_FILT_SETBITS(mac, 0x43, 0xfff0, 0x9);
 2017         }
 2018         PHY_WRITE(mac, 0x5a, 0x480);
 2019         PHY_WRITE(mac, 0x59, 0x810);
 2020         PHY_WRITE(mac, 0x58, 0xd);
 2021         DELAY(20);
 2022 
 2023         nrssi[1] = bwi_nrssi_11g(mac);
 2024 
 2025         /*
 2026          * Install calculated narrow RSSI values
 2027          */
 2028         if (nrssi[1] == nrssi[0])
 2029                 rf->rf_nrssi_slope = 0x10000;
 2030         else
 2031                 rf->rf_nrssi_slope = 0x400000 / (nrssi[0] - nrssi[1]);
 2032         if (nrssi[0] >= -4) {
 2033                 rf->rf_nrssi[0] = nrssi[1];
 2034                 rf->rf_nrssi[1] = nrssi[0];
 2035         }
 2036 
 2037         /*
 2038          * Restore saved RF/PHY registers
 2039          */
 2040         if (phy->phy_rev >= 3) {
 2041                 for (phy3_idx = 0; phy3_idx < 4; ++phy3_idx) {
 2042                         PHY_WRITE(mac, save_phy3_regs[phy3_idx],
 2043                                   save_phy3[phy3_idx]);
 2044                 }
 2045         }
 2046         if (phy->phy_rev >= 2) {
 2047                 PHY_CLRBITS(mac, 0x812, 0x30);
 2048                 PHY_CLRBITS(mac, 0x811, 0x30);
 2049         }
 2050 
 2051         for (i = 0; i < SAVE_RF_MAX; ++i)
 2052                 RF_WRITE(mac, save_rf_regs[i], save_rf[i]);
 2053 
 2054         CSR_WRITE_2(sc, BWI_RF_ANTDIV, ant_div);
 2055         CSR_WRITE_2(sc, BWI_BBP_ATTEN, bbp_atten);
 2056         CSR_WRITE_2(sc, BWI_RF_CHAN_EX, chan_ex);
 2057 
 2058         for (i = 0; i < SAVE_PHY_COMM_MAX; ++i)
 2059                 PHY_WRITE(mac, save_phy_comm_regs[i], save_phy_comm[i]);
 2060 
 2061         bwi_rf_work_around(mac, rf->rf_curchan);
 2062         PHY_SETBITS(mac, 0x802, 0x3);
 2063         bwi_set_gains(mac, NULL);
 2064         PHY_SETBITS(mac, 0x429, 0x8000);
 2065 
 2066         if (phy->phy_rev >= 3) {
 2067                 for (; phy3_idx < SAVE_PHY3_MAX; ++phy3_idx) {
 2068                         PHY_WRITE(mac, save_phy3_regs[phy3_idx],
 2069                                   save_phy3[phy3_idx]);
 2070                 }
 2071         }
 2072 
 2073         bwi_rf_init_sw_nrssi_table(mac);
 2074         bwi_rf_set_nrssi_thr_11g(mac);
 2075 
 2076 #undef SAVE_RF_MAX
 2077 #undef SAVE_PHY_COMM_MAX
 2078 #undef SAVE_PHY3_MAX
 2079 }
 2080 
 2081 static void
 2082 bwi_rf_init_sw_nrssi_table(struct bwi_mac *mac)
 2083 {
 2084         struct bwi_rf *rf = &mac->mac_rf;
 2085         int d, i;
 2086 
 2087         d = 0x1f - rf->rf_nrssi[0];
 2088         for (i = 0; i < BWI_NRSSI_TBLSZ; ++i) {
 2089                 int val;
 2090 
 2091                 val = (((i - d) * rf->rf_nrssi_slope) / 0x10000) + 0x3a;
 2092                 if (val < 0)
 2093                         val = 0;
 2094                 else if (val > 0x3f)
 2095                         val = 0x3f;
 2096 
 2097                 rf->rf_nrssi_table[i] = val;
 2098         }
 2099 }
 2100 
 2101 void
 2102 bwi_rf_init_hw_nrssi_table(struct bwi_mac *mac, uint16_t adjust)
 2103 {
 2104         int i;
 2105 
 2106         for (i = 0; i < BWI_NRSSI_TBLSZ; ++i) {
 2107                 int16_t val;
 2108 
 2109                 val = bwi_nrssi_read(mac, i);
 2110 
 2111                 val -= adjust;
 2112                 if (val < -32)
 2113                         val = -32;
 2114                 else if (val > 31)
 2115                         val = 31;
 2116 
 2117                 bwi_nrssi_write(mac, i, val);
 2118         }
 2119 }
 2120 
 2121 static void
 2122 bwi_rf_set_nrssi_thr_11b(struct bwi_mac *mac)
 2123 {
 2124         struct bwi_rf *rf = &mac->mac_rf;
 2125         int32_t thr;
 2126 
 2127         if (rf->rf_type != BWI_RF_T_BCM2050 ||
 2128             (mac->mac_sc->sc_card_flags & BWI_CARD_F_SW_NRSSI) == 0)
 2129                 return;
 2130 
 2131         /*
 2132          * Calculate nrssi threshold
 2133          */
 2134         if (rf->rf_rev >= 6) {
 2135                 thr = (rf->rf_nrssi[1] - rf->rf_nrssi[0]) * 32;
 2136                 thr += 20 * (rf->rf_nrssi[0] + 1);
 2137                 thr /= 40;
 2138         } else {
 2139                 thr = rf->rf_nrssi[1] - 5;
 2140         }
 2141         if (thr < 0)
 2142                 thr = 0;
 2143         else if (thr > 0x3e)
 2144                 thr = 0x3e;
 2145 
 2146         PHY_READ(mac, BWI_PHYR_NRSSI_THR_11B);  /* dummy read */
 2147         PHY_WRITE(mac, BWI_PHYR_NRSSI_THR_11B, (((uint16_t)thr) << 8) | 0x1c);
 2148 
 2149         if (rf->rf_rev >= 6) {
 2150                 PHY_WRITE(mac, 0x87, 0xe0d);
 2151                 PHY_WRITE(mac, 0x86, 0xc0b);
 2152                 PHY_WRITE(mac, 0x85, 0xa09);
 2153                 PHY_WRITE(mac, 0x84, 0x808);
 2154                 PHY_WRITE(mac, 0x83, 0x808);
 2155                 PHY_WRITE(mac, 0x82, 0x604);
 2156                 PHY_WRITE(mac, 0x81, 0x302);
 2157                 PHY_WRITE(mac, 0x80, 0x100);
 2158         }
 2159 }
 2160 
 2161 static __inline int32_t
 2162 _nrssi_threshold(const struct bwi_rf *rf, int32_t val)
 2163 {
 2164         val *= (rf->rf_nrssi[1] - rf->rf_nrssi[0]);
 2165         val += (rf->rf_nrssi[0] << 6);
 2166         if (val < 32)
 2167                 val += 31;
 2168         else
 2169                 val += 32;
 2170         val >>= 6;
 2171         if (val < -31)
 2172                 val = -31;
 2173         else if (val > 31)
 2174                 val = 31;
 2175         return val;
 2176 }
 2177 
 2178 static void
 2179 bwi_rf_set_nrssi_thr_11g(struct bwi_mac *mac)
 2180 {
 2181         int32_t thr1, thr2;
 2182         uint16_t thr;
 2183 
 2184         /*
 2185          * Find the two nrssi thresholds
 2186          */
 2187         if ((mac->mac_phy.phy_flags & BWI_PHY_F_LINKED) == 0 ||
 2188             (mac->mac_sc->sc_card_flags & BWI_CARD_F_SW_NRSSI) == 0) {
 2189                 int16_t nrssi;
 2190 
 2191                 nrssi = bwi_nrssi_read(mac, 0x20);
 2192                 if (nrssi >= 32)
 2193                         nrssi -= 64;
 2194 
 2195                 if (nrssi < 3) {
 2196                         thr1 = 0x2b;
 2197                         thr2 = 0x27;
 2198                 } else {
 2199                         thr1 = 0x2d;
 2200                         thr2 = 0x2b;
 2201                 }
 2202         } else {
 2203                 /* TODO Interfere mode */
 2204                 thr1 = _nrssi_threshold(&mac->mac_rf, 0x11);
 2205                 thr2 = _nrssi_threshold(&mac->mac_rf, 0xe);
 2206         }
 2207 
 2208 #define NRSSI_THR1_MASK __BITS(5, 0)
 2209 #define NRSSI_THR2_MASK __BITS(11, 6)
 2210 
 2211         thr = __SHIFTIN((uint32_t)thr1, NRSSI_THR1_MASK) |
 2212               __SHIFTIN((uint32_t)thr2, NRSSI_THR2_MASK);
 2213         PHY_FILT_SETBITS(mac, BWI_PHYR_NRSSI_THR_11G, 0xf000, thr);
 2214 
 2215 #undef NRSSI_THR1_MASK
 2216 #undef NRSSI_THR2_MASK
 2217 }
 2218 
 2219 void
 2220 bwi_rf_clear_tssi(struct bwi_mac *mac)
 2221 {
 2222         /* XXX use function pointer */
 2223         if (mac->mac_phy.phy_mode == IEEE80211_MODE_11A) {
 2224                 /* TODO:11A */
 2225         } else {
 2226                 uint16_t val;
 2227                 int i;
 2228 
 2229                 val = __SHIFTIN(BWI_INVALID_TSSI, BWI_LO_TSSI_MASK) |
 2230                       __SHIFTIN(BWI_INVALID_TSSI, BWI_HI_TSSI_MASK);
 2231 
 2232                 for (i = 0; i < 2; ++i) {
 2233                         MOBJ_WRITE_2(mac, BWI_COMM_MOBJ,
 2234                                 BWI_COMM_MOBJ_TSSI_DS + (i * 2), val);
 2235                 }
 2236 
 2237                 for (i = 0; i < 2; ++i) {
 2238                         MOBJ_WRITE_2(mac, BWI_COMM_MOBJ,
 2239                                 BWI_COMM_MOBJ_TSSI_OFDM + (i * 2), val);
 2240                 }
 2241         }
 2242 }
 2243 
 2244 void
 2245 bwi_rf_clear_state(struct bwi_rf *rf)
 2246 {
 2247         int i;
 2248 
 2249         rf->rf_flags &= ~BWI_RF_CLEAR_FLAGS;
 2250         bzero(rf->rf_lo, sizeof(rf->rf_lo));
 2251         bzero(rf->rf_lo_used, sizeof(rf->rf_lo_used));
 2252 
 2253         rf->rf_nrssi_slope = 0;
 2254         rf->rf_nrssi[0] = BWI_INVALID_NRSSI;
 2255         rf->rf_nrssi[1] = BWI_INVALID_NRSSI;
 2256 
 2257         for (i = 0; i < BWI_NRSSI_TBLSZ; ++i)
 2258                 rf->rf_nrssi_table[i] = i;
 2259 
 2260         rf->rf_lo_gain = 0;
 2261         rf->rf_rx_gain = 0;
 2262 
 2263         bcopy(rf->rf_txpower_map0, rf->rf_txpower_map,
 2264               sizeof(rf->rf_txpower_map));
 2265         rf->rf_idle_tssi = rf->rf_idle_tssi0;
 2266 }
 2267 
 2268 static void
 2269 bwi_rf_on_11a(struct bwi_mac *mac)
 2270 {
 2271         /* TODO:11A */
 2272 }
 2273 
 2274 static void
 2275 bwi_rf_on_11bg(struct bwi_mac *mac)
 2276 {
 2277         struct bwi_phy *phy = &mac->mac_phy;
 2278 
 2279         PHY_WRITE(mac, 0x15, 0x8000);
 2280         PHY_WRITE(mac, 0x15, 0xcc00);
 2281         if (phy->phy_flags & BWI_PHY_F_LINKED)
 2282                 PHY_WRITE(mac, 0x15, 0xc0);
 2283         else
 2284                 PHY_WRITE(mac, 0x15, 0);
 2285 
 2286         bwi_rf_set_chan(mac, 6 /* XXX */, 1);
 2287 }
 2288 
 2289 void
 2290 bwi_rf_set_ant_mode(struct bwi_mac *mac, int ant_mode)
 2291 {
 2292         struct bwi_softc *sc = mac->mac_sc;
 2293         struct bwi_phy *phy = &mac->mac_phy;
 2294         uint16_t val;
 2295 
 2296         KASSERT(ant_mode == BWI_ANT_MODE_0 ||
 2297                 ant_mode == BWI_ANT_MODE_1 ||
 2298                 ant_mode == BWI_ANT_MODE_AUTO, ("ant_mode %d", ant_mode));
 2299 
 2300         HFLAGS_CLRBITS(mac, BWI_HFLAG_AUTO_ANTDIV);
 2301 
 2302         if (phy->phy_mode == IEEE80211_MODE_11B) {
 2303                 /* NOTE: v4/v3 conflicts, take v3 */
 2304                 if (mac->mac_rev == 2)
 2305                         val = BWI_ANT_MODE_AUTO;
 2306                 else
 2307                         val = ant_mode;
 2308                 val <<= 7;
 2309                 PHY_FILT_SETBITS(mac, 0x3e2, 0xfe7f, val);
 2310         } else {        /* 11a/g */
 2311                 /* XXX reg/value naming */
 2312                 val = ant_mode << 7;
 2313                 PHY_FILT_SETBITS(mac, 0x401, 0x7e7f, val);
 2314 
 2315                 if (ant_mode == BWI_ANT_MODE_AUTO)
 2316                         PHY_CLRBITS(mac, 0x42b, 0x100);
 2317 
 2318                 if (phy->phy_mode == IEEE80211_MODE_11A) {
 2319                         /* TODO:11A */
 2320                 } else {        /* 11g */
 2321                         if (ant_mode == BWI_ANT_MODE_AUTO)
 2322                                 PHY_SETBITS(mac, 0x48c, 0x2000);
 2323                         else
 2324                                 PHY_CLRBITS(mac, 0x48c, 0x2000);
 2325 
 2326                         if (phy->phy_rev >= 2) {
 2327                                 PHY_SETBITS(mac, 0x461, 0x10);
 2328                                 PHY_FILT_SETBITS(mac, 0x4ad, 0xff00, 0x15);
 2329                                 if (phy->phy_rev == 2) {
 2330                                         PHY_WRITE(mac, 0x427, 0x8);
 2331                                 } else {
 2332                                         PHY_FILT_SETBITS(mac, 0x427,
 2333                                                          0xff00, 0x8);
 2334                                 }
 2335 
 2336                                 if (phy->phy_rev >= 6)
 2337                                         PHY_WRITE(mac, 0x49b, 0xdc);
 2338                         }
 2339                 }
 2340         }
 2341 
 2342         /* XXX v4 set AUTO_ANTDIV unconditionally */
 2343         if (ant_mode == BWI_ANT_MODE_AUTO)
 2344                 HFLAGS_SETBITS(mac, BWI_HFLAG_AUTO_ANTDIV);
 2345 
 2346         val = ant_mode << 8;
 2347         MOBJ_FILT_SETBITS_2(mac, BWI_COMM_MOBJ, BWI_COMM_MOBJ_TX_BEACON,
 2348                             0xfc3f, val);
 2349         MOBJ_FILT_SETBITS_2(mac, BWI_COMM_MOBJ, BWI_COMM_MOBJ_TX_ACK,
 2350                             0xfc3f, val);
 2351         MOBJ_FILT_SETBITS_2(mac, BWI_COMM_MOBJ, BWI_COMM_MOBJ_TX_PROBE_RESP,
 2352                             0xfc3f, val);
 2353 
 2354         /* XXX what's these */
 2355         if (phy->phy_mode == IEEE80211_MODE_11B)
 2356                 CSR_SETBITS_2(sc, 0x5e, 0x4);
 2357 
 2358         CSR_WRITE_4(sc, 0x100, 0x1000000);
 2359         if (mac->mac_rev < 5)
 2360                 CSR_WRITE_4(sc, 0x10c, 0x1000000);
 2361 
 2362         mac->mac_rf.rf_ant_mode = ant_mode;
 2363 }
 2364 
 2365 int
 2366 bwi_rf_get_latest_tssi(struct bwi_mac *mac, int8_t tssi[], uint16_t ofs)
 2367 {
 2368         int i;
 2369 
 2370         for (i = 0; i < 4; ) {
 2371                 uint16_t val;
 2372 
 2373                 val = MOBJ_READ_2(mac, BWI_COMM_MOBJ, ofs + i);
 2374                 tssi[i++] = (int8_t)__SHIFTOUT(val, BWI_LO_TSSI_MASK);
 2375                 tssi[i++] = (int8_t)__SHIFTOUT(val, BWI_HI_TSSI_MASK);
 2376         }
 2377 
 2378         for (i = 0; i < 4; ++i) {
 2379                 if (tssi[i] == BWI_INVALID_TSSI)
 2380                         return EINVAL;
 2381         }
 2382         return 0;
 2383 }
 2384 
 2385 int
 2386 bwi_rf_tssi2dbm(struct bwi_mac *mac, int8_t tssi, int8_t *txpwr)
 2387 {
 2388         struct bwi_rf *rf = &mac->mac_rf;
 2389         int pwr_idx;
 2390 
 2391         pwr_idx = rf->rf_idle_tssi + (int)tssi - rf->rf_base_tssi;
 2392 #if 0
 2393         if (pwr_idx < 0 || pwr_idx >= BWI_TSSI_MAX)
 2394                 return EINVAL;
 2395 #else
 2396         if (pwr_idx < 0)
 2397                 pwr_idx = 0;
 2398         else if (pwr_idx >= BWI_TSSI_MAX)
 2399                 pwr_idx = BWI_TSSI_MAX - 1;
 2400 #endif
 2401 
 2402         *txpwr = rf->rf_txpower_map[pwr_idx];
 2403         return 0;
 2404 }
 2405 
 2406 static int
 2407 bwi_rf_calc_rssi_bcm2050(struct bwi_mac *mac, const struct bwi_rxbuf_hdr *hdr)
 2408 {
 2409         uint16_t flags1, flags3;
 2410         int rssi, lna_gain;
 2411 
 2412         rssi = hdr->rxh_rssi;
 2413         flags1 = le16toh(hdr->rxh_flags1);
 2414         flags3 = le16toh(hdr->rxh_flags3);
 2415 
 2416         if (flags1 & BWI_RXH_F1_OFDM) {
 2417                 if (rssi > 127)
 2418                         rssi -= 256;
 2419                 if (flags3 & BWI_RXH_F3_BCM2050_RSSI)
 2420                         rssi += 17;
 2421                 else
 2422                         rssi -= 4;
 2423                 return rssi;
 2424         }
 2425 
 2426         if (mac->mac_sc->sc_card_flags & BWI_CARD_F_SW_NRSSI) {
 2427                 struct bwi_rf *rf = &mac->mac_rf;
 2428 
 2429                 if (rssi >= BWI_NRSSI_TBLSZ)
 2430                         rssi = BWI_NRSSI_TBLSZ - 1;
 2431 
 2432                 rssi = ((31 - (int)rf->rf_nrssi_table[rssi]) * -131) / 128;
 2433                 rssi -= 67;
 2434         } else {
 2435                 rssi = ((31 - rssi) * -149) / 128;
 2436                 rssi -= 68;
 2437         }
 2438 
 2439         if (mac->mac_phy.phy_mode != IEEE80211_MODE_11G)
 2440                 return rssi;
 2441 
 2442         if (flags3 & BWI_RXH_F3_BCM2050_RSSI)
 2443                 rssi += 20;
 2444 
 2445         lna_gain = __SHIFTOUT(le16toh(hdr->rxh_phyinfo),
 2446                               BWI_RXH_PHYINFO_LNAGAIN);
 2447         DPRINTF(mac->mac_sc, BWI_DBG_RF | BWI_DBG_RX,
 2448                 "lna_gain %d, phyinfo 0x%04x\n",
 2449                 lna_gain, le16toh(hdr->rxh_phyinfo));
 2450         switch (lna_gain) {
 2451         case 0:
 2452                 rssi += 27;
 2453                 break;
 2454         case 1:
 2455                 rssi += 6;
 2456                 break;
 2457         case 2:
 2458                 rssi += 12;
 2459                 break;
 2460         case 3:
 2461                 /*
 2462                  * XXX
 2463                  * According to v3 spec, we should do _nothing_ here,
 2464                  * but it seems that the result RSSI will be too low
 2465                  * (relative to what ath(4) says).  Raise it a little
 2466                  * bit.
 2467                  */
 2468                 rssi += 5;
 2469                 break;
 2470         default:
 2471                 panic("impossible lna gain %d", lna_gain);
 2472         }
 2473         return rssi;
 2474 }
 2475 
 2476 static int
 2477 bwi_rf_calc_rssi_bcm2053(struct bwi_mac *mac, const struct bwi_rxbuf_hdr *hdr)
 2478 {
 2479         uint16_t flags1;
 2480         int rssi;
 2481 
 2482         rssi = (((int)hdr->rxh_rssi - 11) * 103) / 64;
 2483 
 2484         flags1 = le16toh(hdr->rxh_flags1);
 2485         if (flags1 & BWI_RXH_F1_BCM2053_RSSI)
 2486                 rssi -= 109;
 2487         else
 2488                 rssi -= 83;
 2489         return rssi;
 2490 }
 2491 
 2492 static int
 2493 bwi_rf_calc_rssi_bcm2060(struct bwi_mac *mac, const struct bwi_rxbuf_hdr *hdr)
 2494 {
 2495         int rssi;
 2496 
 2497         rssi = hdr->rxh_rssi;
 2498         if (rssi > 127)
 2499                 rssi -= 256;
 2500         return rssi;
 2501 }
 2502 
 2503 static int
 2504 bwi_rf_calc_noise_bcm2050(struct bwi_mac *mac)
 2505 {
 2506         uint16_t val;
 2507         int noise;
 2508 
 2509         val = MOBJ_READ_2(mac, BWI_COMM_MOBJ, BWI_COMM_MOBJ_RF_NOISE);
 2510         noise = (int)val;       /* XXX check bounds? */
 2511 
 2512         if (mac->mac_sc->sc_card_flags & BWI_CARD_F_SW_NRSSI) {
 2513                 struct bwi_rf *rf = &mac->mac_rf;
 2514 
 2515                 if (noise >= BWI_NRSSI_TBLSZ)
 2516                         noise = BWI_NRSSI_TBLSZ - 1;
 2517 
 2518                 noise = ((31 - (int)rf->rf_nrssi_table[noise]) * -131) / 128;
 2519                 noise -= 67;
 2520         } else {
 2521                 noise = ((31 - noise) * -149) / 128;
 2522                 noise -= 68;
 2523         }
 2524         return noise;
 2525 }
 2526 
 2527 static int
 2528 bwi_rf_calc_noise_bcm2053(struct bwi_mac *mac)
 2529 {
 2530         uint16_t val;
 2531         int noise;
 2532 
 2533         val = MOBJ_READ_2(mac, BWI_COMM_MOBJ, BWI_COMM_MOBJ_RF_NOISE);
 2534         noise = (int)val;       /* XXX check bounds? */
 2535 
 2536         noise = ((noise - 11) * 103) / 64;
 2537         noise -= 109;
 2538         return noise;
 2539 }
 2540 
 2541 static int
 2542 bwi_rf_calc_noise_bcm2060(struct bwi_mac *mac)
 2543 {
 2544         /* XXX Dont know how to calc */
 2545         return (BWI_NOISE_FLOOR);
 2546 }
 2547 
 2548 static uint16_t
 2549 bwi_rf_lo_measure_11b(struct bwi_mac *mac)
 2550 {
 2551         uint16_t val;
 2552         int i;
 2553 
 2554         val = 0;
 2555         for (i = 0; i < 10; ++i) {
 2556                 PHY_WRITE(mac, 0x15, 0xafa0);
 2557                 DELAY(1);
 2558                 PHY_WRITE(mac, 0x15, 0xefa0);
 2559                 DELAY(10);
 2560                 PHY_WRITE(mac, 0x15, 0xffa0);
 2561                 DELAY(40);
 2562 
 2563                 val += PHY_READ(mac, 0x2c);
 2564         }
 2565         return val;
 2566 }
 2567 
 2568 static void
 2569 bwi_rf_lo_update_11b(struct bwi_mac *mac)
 2570 {
 2571         struct bwi_softc *sc = mac->mac_sc;
 2572         struct bwi_rf *rf = &mac->mac_rf;
 2573         struct rf_saveregs regs;
 2574         uint16_t rf_val, phy_val, min_val, val;
 2575         uint16_t rf52, bphy_ctrl;
 2576         int i;
 2577 
 2578         DPRINTF(sc, BWI_DBG_RF | BWI_DBG_INIT, "%s enter\n", __func__);
 2579 
 2580         bzero(&regs, sizeof(regs));
 2581         bphy_ctrl = 0;
 2582 
 2583         /*
 2584          * Save RF/PHY registers for later restoration
 2585          */
 2586         SAVE_PHY_REG(mac, &regs, 15);
 2587         rf52 = RF_READ(mac, 0x52) & 0xfff0;
 2588         if (rf->rf_type == BWI_RF_T_BCM2050) {
 2589                 SAVE_PHY_REG(mac, &regs, 0a);
 2590                 SAVE_PHY_REG(mac, &regs, 2a);
 2591                 SAVE_PHY_REG(mac, &regs, 35);
 2592                 SAVE_PHY_REG(mac, &regs, 03);
 2593                 SAVE_PHY_REG(mac, &regs, 01);
 2594                 SAVE_PHY_REG(mac, &regs, 30);
 2595 
 2596                 SAVE_RF_REG(mac, &regs, 43);
 2597                 SAVE_RF_REG(mac, &regs, 7a);
 2598 
 2599                 bphy_ctrl = CSR_READ_2(sc, BWI_BPHY_CTRL);
 2600 
 2601                 SAVE_RF_REG(mac, &regs, 52);
 2602                 regs.rf_52 &= 0xf0;
 2603 
 2604                 PHY_WRITE(mac, 0x30, 0xff);
 2605                 CSR_WRITE_2(sc, BWI_PHY_CTRL, 0x3f3f);
 2606                 PHY_WRITE(mac, 0x35, regs.phy_35 & 0xff7f);
 2607                 RF_WRITE(mac, 0x7a, regs.rf_7a & 0xfff0);
 2608         }
 2609 
 2610         PHY_WRITE(mac, 0x15, 0xb000);
 2611 
 2612         if (rf->rf_type == BWI_RF_T_BCM2050) {
 2613                 PHY_WRITE(mac, 0x2b, 0x203);
 2614                 PHY_WRITE(mac, 0x2a, 0x8a3);
 2615         } else {
 2616                 PHY_WRITE(mac, 0x2b, 0x1402);
 2617         }
 2618 
 2619         /*
 2620          * Setup RF signal
 2621          */
 2622         rf_val = 0;
 2623         min_val = UINT16_MAX;
 2624 
 2625         for (i = 0; i < 4; ++i) {
 2626                 RF_WRITE(mac, 0x52, rf52 | i);
 2627                 bwi_rf_lo_measure_11b(mac);     /* Ignore return value */
 2628         }
 2629         for (i = 0; i < 10; ++i) {
 2630                 RF_WRITE(mac, 0x52, rf52 | i);
 2631 
 2632                 val = bwi_rf_lo_measure_11b(mac) / 10;
 2633                 if (val < min_val) {
 2634                         min_val = val;
 2635                         rf_val = i;
 2636                 }
 2637         }
 2638         RF_WRITE(mac, 0x52, rf52 | rf_val);
 2639 
 2640         /*
 2641          * Setup PHY signal
 2642          */
 2643         phy_val = 0;
 2644         min_val = UINT16_MAX;
 2645 
 2646         for (i = -4; i < 5; i += 2) {
 2647                 int j;
 2648 
 2649                 for (j = -4; j < 5; j += 2) {
 2650                         uint16_t phy2f;
 2651 
 2652                         phy2f = (0x100 * i) + j;
 2653                         if (j < 0)
 2654                                 phy2f += 0x100;
 2655                         PHY_WRITE(mac, 0x2f, phy2f);
 2656 
 2657                         val = bwi_rf_lo_measure_11b(mac) / 10;
 2658                         if (val < min_val) {
 2659                                 min_val = val;
 2660                                 phy_val = phy2f;
 2661                         }
 2662                 }
 2663         }
 2664         PHY_WRITE(mac, 0x2f, phy_val + 0x101);
 2665 
 2666         /*
 2667          * Restore saved RF/PHY registers
 2668          */
 2669         if (rf->rf_type == BWI_RF_T_BCM2050) {
 2670                 RESTORE_PHY_REG(mac, &regs, 0a);
 2671                 RESTORE_PHY_REG(mac, &regs, 2a);
 2672                 RESTORE_PHY_REG(mac, &regs, 35);
 2673                 RESTORE_PHY_REG(mac, &regs, 03);
 2674                 RESTORE_PHY_REG(mac, &regs, 01);
 2675                 RESTORE_PHY_REG(mac, &regs, 30);
 2676 
 2677                 RESTORE_RF_REG(mac, &regs, 43);
 2678                 RESTORE_RF_REG(mac, &regs, 7a);
 2679 
 2680                 RF_FILT_SETBITS(mac, 0x52, 0xf, regs.rf_52);
 2681 
 2682                 CSR_WRITE_2(sc, BWI_BPHY_CTRL, bphy_ctrl);
 2683         }
 2684         RESTORE_PHY_REG(mac, &regs, 15);
 2685 
 2686         bwi_rf_work_around(mac, rf->rf_curchan);
 2687 }

Cache object: 173bf38624472cda6c124a3e8c4413fc


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]


This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.