1 # Firmware configuration file.
2 #
3 # Global limits (some are hardware limits, others are due to the firmware).
4 # nvi = 128 virtual interfaces
5 # niqflint = 1023 ingress queues with freelists and/or interrupts
6 # nethctrl = 64K Ethernet or ctrl egress queues
7 # neq = 64K egress queues of all kinds, including freelists
8 # nexactf = 336 MPS TCAM entries, can oversubscribe.
9 #
10
11 [global]
12 rss_glb_config_mode = basicvirtual
13 rss_glb_config_options = tnlmapen,hashtoeplitz,tnlalllkp
14
15 sge_timer_value = 1, 5, 10, 50, 100, 200 # usecs
16
17 # enable TP_OUT_CONFIG.IPIDSPLITMODE
18 reg[0x7d04] = 0x00010000/0x00010000
19
20 # disable TP_PARA_REG3.RxFragEn
21 reg[0x7d6c] = 0x00000000/0x00007000
22
23 reg[0x7dc0] = 0x0e2f8849 # TP_SHIFT_CNT
24
25 filterMode = fragmentation, mpshittype, protocol, vlan, port, fcoe
26 filterMask = protocol, fcoe
27
28 tp_pmrx = 36, 512
29 tp_pmrx_pagesize = 64K
30
31 # TP number of RX channels (0 = auto)
32 tp_nrxch = 0
33
34 tp_pmtx = 46, 512
35 tp_pmtx_pagesize = 64K
36
37 # TP number of TX channels (0 = auto)
38 tp_ntxch = 0
39
40 # TP OFLD MTUs
41 tp_mtus = 88, 256, 512, 576, 808, 1024, 1280, 1488, 1500, 2002, 2048, 4096, 4352, 8192, 9000, 9600
42
43 # cluster, lan, or wan.
44 tp_tcptuning = lan
45
46 # PFs 0-3. These get 8 MSI/8 MSI-X vectors each. VFs are supported by
47 # these 4 PFs only.
48 [function "0"]
49 wx_caps = all
50 r_caps = all
51 nvi = 1
52 rssnvi = 0
53 niqflint = 2
54 nethctrl = 2
55 neq = 4
56 nexactf = 2
57 cmask = all
58 pmask = 0x1
59
60 [function "1"]
61 wx_caps = all
62 r_caps = all
63 nvi = 1
64 rssnvi = 0
65 niqflint = 2
66 nethctrl = 2
67 neq = 4
68 nexactf = 2
69 cmask = all
70 pmask = 0x2
71
72 [function "2"]
73 wx_caps = all
74 r_caps = all
75 nvi = 1
76 rssnvi = 0
77 niqflint = 2
78 nethctrl = 2
79 neq = 4
80 nexactf = 2
81 cmask = all
82 pmask = 0x4
83
84 [function "3"]
85 wx_caps = all
86 r_caps = all
87 nvi = 1
88 rssnvi = 0
89 niqflint = 2
90 nethctrl = 2
91 neq = 4
92 nexactf = 2
93 cmask = all
94 pmask = 0x8
95
96 # PF4 is the resource-rich PF that the bus/nexus driver attaches to.
97 # It gets 32 MSI/128 MSI-X vectors.
98 [function "4"]
99 wx_caps = all
100 r_caps = all
101 nvi = 32
102 rssnvi = 16
103 niqflint = 512
104 nethctrl = 1024
105 neq = 2048
106 nexactf = 280
107 cmask = all
108 pmask = all
109 nethofld = 2048
110
111 # driver will mask off features it won't use
112 protocol = ofld, rddp, rdmac, iscsi_initiator_pdu, iscsi_target_pdu
113
114 tp_l2t = 4096
115 tp_ddp = 2
116 tp_ddp_iscsi = 2
117 tp_stag = 2
118 tp_pbl = 5
119 tp_rq = 7
120
121 # TCAM has 8K cells; each region must start at a multiple of 128 cell.
122 # Each entry in these categories takes 4 cells each. nhash will use the
123 # TCAM iff there is room left (that is, the rest don't add up to 2048).
124 nroute = 32
125 nclip = 32
126 nfilter = 1456
127 nserver = 512
128 nhash = 16384
129
130 # PF5 is the SCSI Controller PF. It gets 32 MSI/40 MSI-X vectors.
131 # Not used right now.
132 [function "5"]
133 nvi = 1
134 rssnvi = 0
135
136 # PF6 is the FCoE Controller PF. It gets 32 MSI/40 MSI-X vectors.
137 # Not used right now.
138 [function "6"]
139 nvi = 1
140 rssnvi = 0
141
142 # The following function, 1023, is not an actual PCIE function but is used to
143 # configure and reserve firmware internal resources that come from the global
144 # resource pool.
145 [function "1023"]
146 wx_caps = all
147 r_caps = all
148 nvi = 4
149 rssnvi = 0
150 cmask = all
151 pmask = all
152 nexactf = 8
153 nfilter = 16
154
155 # For Virtual functions, we only allow NIC functionality and we only allow
156 # access to one port (1 << PF). Note that because of limitations in the
157 # Scatter Gather Engine (SGE) hardware which checks writes to VF KDOORBELL
158 # and GTS registers, the number of Ingress and Egress Queues must be a power
159 # of 2.
160 #
161 [function "0/*"]
162 wx_caps = 0x82
163 r_caps = 0x86
164 nvi = 1
165 rssnvi = 0
166 niqflint = 2
167 nethctrl = 2
168 neq = 4
169 nexactf = 2
170 cmask = all
171 pmask = 0x1
172
173 [function "1/*"]
174 wx_caps = 0x82
175 r_caps = 0x86
176 nvi = 1
177 rssnvi = 0
178 niqflint = 2
179 nethctrl = 2
180 neq = 4
181 nexactf = 2
182 cmask = all
183 pmask = 0x2
184
185 [function "2/*"]
186 wx_caps = 0x82
187 r_caps = 0x86
188 nvi = 1
189 rssnvi = 0
190 niqflint = 2
191 nethctrl = 2
192 neq = 4
193 nexactf = 2
194 cmask = all
195 pmask = 0x4
196
197 [function "3/*"]
198 wx_caps = 0x82
199 r_caps = 0x86
200 nvi = 1
201 rssnvi = 0
202 niqflint = 2
203 nethctrl = 2
204 neq = 4
205 nexactf = 2
206 cmask = all
207 pmask = 0x8
208
209 # MPS has 192K buffer space for ingress packets from the wire as well as
210 # loopback path of the L2 switch.
211 [port "0"]
212 dcb = none
213 bg_mem = 25
214 lpbk_mem = 25
215 hwm = 30
216 lwm = 15
217 dwm = 30
218
219 [port "1"]
220 dcb = none
221 bg_mem = 25
222 lpbk_mem = 25
223 hwm = 30
224 lwm = 15
225 dwm = 30
226
227 [port "2"]
228 dcb = none
229 bg_mem = 25
230 lpbk_mem = 25
231 hwm = 30
232 lwm = 15
233 dwm = 30
234
235 [port "3"]
236 dcb = none
237 bg_mem = 25
238 lpbk_mem = 25
239 hwm = 30
240 lwm = 15
241 dwm = 30
242
243 [fini]
244 version = 0x1
245 checksum = 0x3ecbe8a0
246 #
247 # $FreeBSD$
248 #
Cache object: 68c8091f9bf84dbb7e3ecca4eec32e78
|