FreeBSD/Linux Kernel Cross Reference
sys/dev/dpt/dpt_pci.c
1 /*-
2 * Copyright (c) 2000 Matthew N. Dodd <winter@jurai.net>
3 * All rights reserved.
4 *
5 * Copyright (c) 1997 Simon Shapiro
6 * All Rights Reserved
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 * SUCH DAMAGE.
28 */
29
30 #include <sys/cdefs.h>
31 __FBSDID("$FreeBSD: releng/8.4/sys/dev/dpt/dpt_pci.c 233025 2012-03-16 09:22:59Z scottl $");
32
33 #include <sys/param.h>
34 #include <sys/systm.h>
35 #include <sys/kernel.h>
36 #include <sys/module.h>
37 #include <sys/lock.h>
38 #include <sys/mutex.h>
39 #include <sys/bus.h>
40
41 #include <machine/bus.h>
42 #include <machine/resource.h>
43 #include <sys/rman.h>
44
45 #include <dev/pci/pcireg.h>
46 #include <dev/pci/pcivar.h>
47
48 #include <cam/scsi/scsi_all.h>
49
50 #include <dev/dpt/dpt.h>
51
52 #define DPT_VENDOR_ID 0x1044
53 #define DPT_DEVICE_ID 0xa400
54
55 #define DPT_PCI_IOADDR PCIR_BAR(0) /* I/O Address */
56 #define DPT_PCI_MEMADDR PCIR_BAR(1) /* Mem I/O Address */
57
58 #define ISA_PRIMARY_WD_ADDRESS 0x1f8
59
60 static int dpt_pci_probe (device_t);
61 static int dpt_pci_attach (device_t);
62
63 static int
64 dpt_pci_probe (device_t dev)
65 {
66 if ((pci_get_vendor(dev) == DPT_VENDOR_ID) &&
67 (pci_get_device(dev) == DPT_DEVICE_ID)) {
68 device_set_desc(dev, "DPT Caching SCSI RAID Controller");
69 return (BUS_PROBE_DEFAULT);
70 }
71 return (ENXIO);
72 }
73
74 static int
75 dpt_pci_attach (device_t dev)
76 {
77 dpt_softc_t * dpt;
78 int s;
79 int error = 0;
80
81 u_int32_t command;
82
83 dpt = device_get_softc(dev);
84 dpt->dev = dev;
85
86 command = pci_read_config(dev, PCIR_COMMAND, /*bytes*/1);
87
88 #ifdef DPT_ALLOW_MMIO
89 if ((command & PCIM_CMD_MEMEN) != 0) {
90 dpt->io_rid = DPT_PCI_MEMADDR;
91 dpt->io_type = SYS_RES_MEMORY;
92 dpt->io_res = bus_alloc_resource_any(dev, dpt->io_type,
93 &dpt->io_rid, RF_ACTIVE);
94 }
95 #endif
96 if (dpt->io_res == NULL && (command & PCIM_CMD_PORTEN) != 0) {
97 dpt->io_rid = DPT_PCI_IOADDR;
98 dpt->io_type = SYS_RES_IOPORT;
99 dpt->io_res = bus_alloc_resource_any(dev, dpt->io_type,
100 &dpt->io_rid, RF_ACTIVE);
101 }
102
103 if (dpt->io_res == NULL) {
104 device_printf(dev, "can't allocate register resources\n");
105 error = ENOMEM;
106 goto bad;
107 }
108 dpt->io_offset = 0x10;
109
110 dpt->irq_rid = 0;
111 dpt->irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &dpt->irq_rid,
112 RF_ACTIVE | RF_SHAREABLE);
113 if (dpt->irq_res == NULL) {
114 device_printf(dev, "No irq?!\n");
115 error = ENOMEM;
116 goto bad;
117 }
118
119 /* Ensure busmastering is enabled */
120 command |= PCIM_CMD_BUSMASTEREN;
121 pci_write_config(dev, PCIR_COMMAND, command, /*bytes*/1);
122
123 if (rman_get_start(dpt->io_res) == (ISA_PRIMARY_WD_ADDRESS - 0x10)) {
124 #ifdef DPT_DEBUG_WARN
125 device_printf(dev, "Mapped as an IDE controller. "
126 "Disabling SCSI setup\n");
127 #endif
128 error = ENXIO;
129 goto bad;
130 }
131
132 dpt_alloc(dev);
133
134 /* Allocate a dmatag representing the capabilities of this attachment */
135 if (bus_dma_tag_create( /* PCI parent */ bus_get_dma_tag(dev),
136 /* alignemnt */ 1,
137 /* boundary */ 0,
138 /* lowaddr */ BUS_SPACE_MAXADDR_32BIT,
139 /* highaddr */ BUS_SPACE_MAXADDR,
140 /* filter */ NULL,
141 /* filterarg */ NULL,
142 /* maxsize */ BUS_SPACE_MAXSIZE_32BIT,
143 /* nsegments */ ~0,
144 /* maxsegsz */ BUS_SPACE_MAXSIZE_32BIT,
145 /* flags */ 0,
146 /* lockfunc */ busdma_lock_mutex,
147 /* lockarg */ &Giant,
148 &dpt->parent_dmat) != 0) {
149 error = ENXIO;
150 goto bad;
151 }
152
153 s = splcam();
154
155 if (dpt_init(dpt) != 0) {
156 error = ENXIO;
157 goto bad;
158 }
159
160 /* Register with the XPT */
161 dpt_attach(dpt);
162
163 splx(s);
164
165 if (bus_setup_intr(dev, dpt->irq_res, INTR_TYPE_CAM | INTR_ENTROPY,
166 NULL, dpt_intr, dpt, &dpt->ih)) {
167 device_printf(dev, "Unable to register interrupt handler\n");
168 error = ENXIO;
169 goto bad;
170 }
171
172 return (error);
173
174 bad:
175 dpt_release_resources(dev);
176
177 dpt_free(dpt);
178
179 return (error);
180 }
181
182 static device_method_t dpt_pci_methods[] = {
183 /* Device interface */
184 DEVMETHOD(device_probe, dpt_pci_probe),
185 DEVMETHOD(device_attach, dpt_pci_attach),
186 DEVMETHOD(device_detach, dpt_detach),
187
188 { 0, 0 }
189 };
190
191 static driver_t dpt_pci_driver = {
192 "dpt",
193 dpt_pci_methods,
194 sizeof(dpt_softc_t),
195 };
196
197 DRIVER_MODULE(dpt, pci, dpt_pci_driver, dpt_devclass, 0, 0);
198 MODULE_DEPEND(dpt, pci, 1, 1, 1);
199 MODULE_DEPEND(dpt, cam, 1, 1, 1);
Cache object: 568c8068493f4303de32d51695fcfbd2
|