FreeBSD/Linux Kernel Cross Reference
sys/dev/ep/if_ep_isa.c
1 /*-
2 * Copyright (c) 1994 Herb Peyerl <hpeyerl@novatel.ca>
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. All advertising materials mentioning features or use of this software
14 * must display the following acknowledgement:
15 * This product includes software developed by Herb Peyerl.
16 * 4. The name of Herb Peyerl may not be used to endorse or promote products
17 * derived from this software without specific prior written permission.
18 *
19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
20 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
21 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
22 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
23 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
24 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
25 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
26 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
27 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
28 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
29 */
30
31 #include <sys/cdefs.h>
32 __FBSDID("$FreeBSD: releng/6.4/sys/dev/ep/if_ep_isa.c 147717 2005-07-01 05:31:23Z imp $");
33
34 #include <sys/param.h>
35 #include <sys/systm.h>
36 #include <sys/kernel.h>
37 #include <sys/socket.h>
38 #include <sys/module.h>
39 #include <sys/bus.h>
40
41 #include <machine/bus.h>
42 #include <machine/resource.h>
43 #include <sys/rman.h>
44
45 #include <net/if.h>
46 #include <net/if_arp.h>
47 #include <net/if_media.h>
48
49 #include <isa/isavar.h>
50
51 #include <dev/ep/if_epreg.h>
52 #include <dev/ep/if_epvar.h>
53
54 #ifdef __i386__
55 #include <i386/isa/elink.h>
56 #endif
57
58 #ifdef __i386__
59 static uint16_t get_eeprom_data(int, int);
60 static void ep_isa_identify(driver_t *, device_t);
61 #endif
62
63 static int ep_isa_probe(device_t);
64 static int ep_isa_attach(device_t);
65 static int ep_eeprom_cksum(struct ep_softc *);
66
67 struct isa_ident {
68 uint32_t id;
69 char *name;
70 };
71 const char *ep_isa_match_id(uint32_t, struct isa_ident *);
72
73 #define ISA_ID_3C509_XXX 0x0506d509
74 #define ISA_ID_3C509_TP 0x506d5090
75 #define ISA_ID_3C509_BNC 0x506d5091
76 #define ISA_ID_3C509_COMBO 0x506d5094
77 #define ISA_ID_3C509_TPO 0x506d5095
78 #define ISA_ID_3C509_TPC 0x506d5098
79 #ifdef PC98
80 #define ISA_ID_3C569B_COMBO 0x506d5694
81 #define ISA_ID_3C569B_TPO 0x506d5695
82 #endif
83
84 #ifdef __i386__
85 static struct isa_ident ep_isa_devs[] = {
86 {ISA_ID_3C509_TP, "3Com 3C509-TP EtherLink III"},
87 {ISA_ID_3C509_BNC, "3Com 3C509-BNC EtherLink III"},
88 {ISA_ID_3C509_COMBO, "3Com 3C509-Combo EtherLink III"},
89 {ISA_ID_3C509_TPO, "3Com 3C509-TPO EtherLink III"},
90 {ISA_ID_3C509_TPC, "3Com 3C509-TPC EtherLink III"},
91 #ifdef PC98
92 {ISA_ID_3C569B_COMBO, "3Com 3C569B-J-Combo EtherLink III"},
93 {ISA_ID_3C569B_TPO, "3Com 3C569B-J-TPO EtherLink III"},
94 #endif
95 {0, NULL},
96 };
97 #endif
98
99 static struct isa_pnp_id ep_ids[] = {
100 {0x90506d50, "3Com 3C509B-TP EtherLink III (PnP)"}, /* TCM5090 */
101 {0x91506d50, "3Com 3C509B-BNC EtherLink III (PnP)"}, /* TCM5091 */
102 {0x94506d50, "3Com 3C509B-Combo EtherLink III (PnP)"}, /* TCM5094 */
103 {0x95506d50, "3Com 3C509B-TPO EtherLink III (PnP)"}, /* TCM5095 */
104 {0x98506d50, "3Com 3C509B-TPC EtherLink III (PnP)"}, /* TCM5098 */
105 {0xf780d041, NULL}, /* PNP80f7 */
106 {0, NULL},
107 };
108
109 /*
110 * We get eeprom data from the id_port given an offset into the eeprom.
111 * Basically; after the ID_sequence is sent to all of the cards; they enter
112 * the ID_CMD state where they will accept command requests. 0x80-0xbf loads
113 * the eeprom data. We then read the port 16 times and with every read; the
114 * cards check for contention (ie: if one card writes a 0 bit and another
115 * writes a 1 bit then the host sees a 0. At the end of the cycle; each card
116 * compares the data on the bus; if there is a difference then that card goes
117 * into ID_WAIT state again). In the meantime; one bit of data is returned in
118 * the AX register which is conveniently returned to us by inb(). Hence; we
119 * read 16 times getting one bit of data with each read.
120 */
121 #ifdef __i386__
122 static uint16_t
123 get_eeprom_data(int id_port, int offset)
124 {
125 int i;
126 uint16_t data = 0;
127
128 outb(id_port, EEPROM_CMD_RD | offset);
129 DELAY(BIT_DELAY_MULTIPLE * 1000);
130 for (i = 0; i < 16; i++) {
131 DELAY(50);
132 data = (data << 1) | (inw(id_port) & 1);
133 }
134 return (data);
135 }
136 #endif
137
138 const char *
139 ep_isa_match_id(uint32_t id, struct isa_ident *isa_devs)
140 {
141 struct isa_ident *i = isa_devs;
142
143 while (i->name != NULL) {
144 if (id == i->id)
145 return (i->name);
146 i++;
147 }
148 /*
149 * If we see a card that is likely to be a 3c509
150 * return something so that it will work; be annoying
151 * so that the user will tell us about it though.
152 */
153 if ((id >> 4) == ISA_ID_3C509_XXX)
154 return ("Unknown 3c509; notify maintainer!");
155 return (NULL);
156 }
157
158 #ifdef __i386__
159 static void
160 ep_isa_identify(driver_t * driver, device_t parent)
161 {
162 int tag = EP_LAST_TAG;
163 int found = 0;
164 int i;
165 int j;
166 const char *desc;
167 uint16_t data;
168 uint32_t irq;
169 uint32_t ioport;
170 uint32_t isa_id;
171 device_t child;
172
173 outb(ELINK_ID_PORT, 0);
174 outb(ELINK_ID_PORT, 0);
175 elink_idseq(ELINK_509_POLY);
176 elink_reset();
177
178 DELAY(DELAY_MULTIPLE * 10000);
179
180 for (i = 0; i < EP_MAX_BOARDS; i++) {
181
182 outb(ELINK_ID_PORT, 0);
183 outb(ELINK_ID_PORT, 0);
184 elink_idseq(ELINK_509_POLY);
185 DELAY(400);
186
187 /*
188 * For the first probe, clear all board's tag registers.
189 * Otherwise kill off already-found boards. -- linux 3c509.c
190 */
191 if (i == 0)
192 outb(ELINK_ID_PORT, 0xd0);
193 else
194 outb(ELINK_ID_PORT, 0xd8);
195
196 /* Get out of loop if we're out of cards. */
197 data = get_eeprom_data(ELINK_ID_PORT, EEPROM_MFG_ID);
198 if (data != MFG_ID)
199 break;
200 /* resolve contention using the Ethernet address */
201 for (j = 0; j < 3; j++)
202 (void)get_eeprom_data(ELINK_ID_PORT, j);
203
204 /*
205 * Construct an 'isa_id' in 'EISA'
206 * format.
207 */
208 data = get_eeprom_data(ELINK_ID_PORT, EEPROM_MFG_ID);
209 isa_id = (htons(data) << 16);
210 data = get_eeprom_data(ELINK_ID_PORT, EEPROM_PROD_ID);
211 isa_id |= htons(data);
212
213 /* Find known ISA boards */
214 desc = ep_isa_match_id(isa_id, ep_isa_devs);
215 if (!desc) {
216 if (bootverbose)
217 device_printf(parent,
218 "unknown ID 0x%08x\n", isa_id);
219 continue;
220 }
221 /* Retreive IRQ */
222 data = get_eeprom_data(ELINK_ID_PORT, EEPROM_RESOURCE_CFG);
223 irq = (data >> 12);
224
225 /* Retreive IOPORT */
226 data = get_eeprom_data(ELINK_ID_PORT, EEPROM_ADDR_CFG);
227 #ifdef PC98
228 ioport = (((data & ADDR_CFG_MASK) * 0x100) + 0x40d0);
229 #else
230 ioport = (((data & ADDR_CFG_MASK) << 4) + 0x200);
231 #endif
232
233 if ((data & ADDR_CFG_MASK) == ADDR_CFG_EISA) {
234 device_printf(parent,
235 "<%s> at port 0x%03x in EISA mode!\n",
236 desc, ioport);
237 /*
238 * Set the adaptor tag so that the next card can be
239 * found.
240 */
241 outb(ELINK_ID_PORT, tag--);
242 continue;
243 }
244 /* Test for an adapter with PnP support. */
245 data = get_eeprom_data(ELINK_ID_PORT, EEPROM_CAP);
246 if (data == CAP_ISA) {
247 data = get_eeprom_data(ELINK_ID_PORT,
248 EEPROM_INT_CONFIG_1);
249 if (data & ICW1_IAS_PNP) {
250 if (bootverbose)
251 device_printf(parent,
252 "<%s> at 0x%03x "
253 "in PnP mode!\n",
254 desc, ioport);
255 /*
256 * Set the adaptor tag so that the next card
257 * can be found.
258 */
259 outb(ELINK_ID_PORT, tag--);
260 continue;
261 }
262 }
263 /* Set the adaptor tag so that the next card can be found. */
264 outb(ELINK_ID_PORT, tag--);
265
266 /* Activate the adaptor at the EEPROM location. */
267 outb(ELINK_ID_PORT, ACTIVATE_ADAPTER_TO_CONFIG);
268
269 /* Test for an adapter in TEST mode. */
270 outw(ioport + EP_COMMAND, WINDOW_SELECT | 0);
271 data = inw(ioport + EP_W0_EEPROM_COMMAND);
272 if (data & EEPROM_TST_MODE) {
273 device_printf(parent,
274 "<%s> at port 0x%03x in TEST mode!"
275 " Erase pencil mark.\n",
276 desc, ioport);
277 continue;
278 }
279 child = BUS_ADD_CHILD(parent, ISA_ORDER_SPECULATIVE, "ep", -1);
280 device_set_desc_copy(child, desc);
281 device_set_driver(child, driver);
282 bus_set_resource(child, SYS_RES_IRQ, 0, irq, 1);
283 bus_set_resource(child, SYS_RES_IOPORT, 0, ioport, EP_IOSIZE);
284
285 if (bootverbose)
286 device_printf(parent,
287 "<%s>"
288 " at port 0x%03x-0x%03x irq %d\n",
289 desc, ioport, ioport + EP_IOSIZE, irq);
290 found++;
291 }
292 }
293 #endif
294
295 static int
296 ep_isa_probe(device_t dev)
297 {
298 int error = 0;
299
300 /* Check isapnp ids */
301 error = ISA_PNP_PROBE(device_get_parent(dev), dev, ep_ids);
302
303 /* If the card had a PnP ID that didn't match any we know about */
304 if (error == ENXIO)
305 return (error);
306
307 /* If we had some other problem. */
308 if (!(error == 0 || error == ENOENT))
309 return (error);
310
311 /* If we have the resources we need then we're good to go. */
312 if ((bus_get_resource_start(dev, SYS_RES_IOPORT, 0) != 0) &&
313 (bus_get_resource_start(dev, SYS_RES_IRQ, 0) != 0))
314 return (0);
315
316 return (ENXIO);
317 }
318
319 static int
320 ep_isa_attach(device_t dev)
321 {
322 struct ep_softc *sc = device_get_softc(dev);
323 int error = 0;
324
325 if ((error = ep_alloc(dev)))
326 goto bad;
327 ep_get_media(sc);
328
329 GO_WINDOW(sc, 0);
330 SET_IRQ(sc, rman_get_start(sc->irq));
331
332 if ((error = ep_attach(sc)))
333 goto bad;
334 error = ep_eeprom_cksum(sc);
335 if (error) {
336 device_printf(sc->dev, "Invalid EEPROM checksum!\n");
337 goto bad;
338 }
339 if ((error = bus_setup_intr(dev, sc->irq, INTR_TYPE_NET | INTR_MPSAFE, ep_intr,
340 sc, &sc->ep_intrhand))) {
341 device_printf(dev, "bus_setup_intr() failed! (%d)\n", error);
342 goto bad;
343 }
344 return (0);
345 bad:
346 ep_free(dev);
347 return (error);
348 }
349
350 static int
351 ep_eeprom_cksum(struct ep_softc *sc)
352 {
353 int i;
354 int error;
355 uint16_t val;
356 uint16_t cksum;
357 uint8_t cksum_high = 0;
358 uint8_t cksum_low = 0;
359
360 error = ep_get_e(sc, 0x0f, &val);
361 if (error)
362 return (ENXIO);
363 cksum = val;
364
365 for (i = 0; i < 0x0f; i++) {
366 error = ep_get_e(sc, i, &val);
367 if (error)
368 return (ENXIO);
369 switch (i) {
370 case 0x08:
371 case 0x09:
372 case 0x0d:
373 cksum_low ^= (uint8_t) (val & 0x00ff) ^
374 (uint8_t)((val & 0xff00) >> 8);
375 break;
376 default:
377 cksum_high ^= (uint8_t) (val & 0x00ff) ^
378 (uint8_t)((val & 0xff00) >> 8);
379 break;
380 }
381 }
382 return (cksum != ((uint16_t)cksum_low | (uint16_t)(cksum_high << 8)));
383 }
384
385 static device_method_t ep_isa_methods[] = {
386 /* Device interface */
387 #ifdef __i386__
388 DEVMETHOD(device_identify, ep_isa_identify),
389 #endif
390 DEVMETHOD(device_probe, ep_isa_probe),
391 DEVMETHOD(device_attach, ep_isa_attach),
392 DEVMETHOD(device_detach, ep_detach),
393
394 {0, 0}
395 };
396
397 static driver_t ep_isa_driver = {
398 "ep",
399 ep_isa_methods,
400 sizeof(struct ep_softc),
401 };
402
403 extern devclass_t ep_devclass;
404
405 DRIVER_MODULE(ep, isa, ep_isa_driver, ep_devclass, 0, 0);
406 #ifdef __i386__
407 MODULE_DEPEND(ep, elink, 1, 1, 1);
408 #endif
Cache object: 1b0fd07dd9bfbb3f7e7a8366e23fb31c
|