The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/dev/ex/if_exreg.h

Version: -  FREEBSD  -  FREEBSD-13-STABLE  -  FREEBSD-13-0  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  l41  -  OPENBSD  -  linux-2.6  -  MK84  -  PLAN9  -  xnu-8792 
SearchContext: -  none  -  3  -  10 

    1 /*
    2  * Copyright (c) 1996, Javier Martín Rueda (jmrueda@diatel.upm.es)
    3  * All rights reserved.
    4  *
    5  * Redistribution and use in source and binary forms, with or without
    6  * modification, are permitted provided that the following conditions
    7  * are met:
    8  * 1. Redistributions of source code must retain the above copyright
    9  *    notice unmodified, this list of conditions, and the following
   10  *    disclaimer.
   11  * 2. Redistributions in binary form must reproduce the above copyright
   12  *    notice, this list of conditions and the following disclaimer in the
   13  *    documentation and/or other materials provided with the distribution.
   14  *
   15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
   16  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
   17  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
   18  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
   19  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
   20  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
   21  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
   22  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
   23  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
   24  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
   25  * SUCH DAMAGE.
   26  *
   27  * $FreeBSD$
   28  */
   29 
   30 /*
   31  * Intel EtherExpress Pro/10 Ethernet driver
   32  */
   33 
   34 /*
   35  * Several constants.
   36  */
   37 
   38 #define CARD_TYPE_EX_10         1
   39 #define CARD_TYPE_EX_10_PLUS    2
   40 
   41 /* Length of an ethernet address. */
   42 #define ETHER_ADDR_LEN 6
   43 /* Default RAM size in board. */
   44 #define CARD_RAM_SIZE 0x8000
   45 /* Number of I/O ports used. */
   46 #define EX_IOSIZE 16
   47 
   48 /*
   49  * Intel EtherExpress Pro (i82595 based) registers
   50  */
   51 
   52 /* Common registers to all banks. */
   53 
   54 #define CMD_REG 0
   55 #define REG1 1
   56 #define REG2 2
   57 #define REG3 3
   58 #define REG4 4
   59 #define REG5 5
   60 #define REG6 6
   61 #define REG7 7
   62 #define REG8 8
   63 #define REG9 9
   64 #define REG10 10
   65 #define REG11 11
   66 #define REG12 12
   67 #define REG13 13
   68 #define REG14 14
   69 #define REG15 15
   70 
   71 /* Definitions for command register (CMD_REG). */
   72 
   73 #define Switch_Bank_CMD 0
   74 #define MC_Setup_CMD 3
   75 #define Transmit_CMD 4
   76 #define Diagnose_CMD 7
   77 #define Rcv_Enable_CMD 8
   78 #define Rcv_Stop 11
   79 #define Reset_CMD 14
   80 #define Resume_XMT_List_CMD 28
   81 #define Sel_Reset_CMD 30
   82 #define Abort 0x20
   83 #define Bank0_Sel 0x00
   84 #define Bank1_Sel 0x40
   85 #define Bank2_Sel 0x80
   86 
   87 /* Bank 0 specific registers. */
   88 
   89 #define STATUS_REG 1
   90 #define ID_REG 2
   91 #define Id_Mask 0x2c
   92 #define Id_Sig 0x24
   93 #define Counter_bits 0xc0
   94 #define MASK_REG 3
   95 #define Exec_Int 0x08
   96 #define Tx_Int 0x04
   97 #define Rx_Int 0x02
   98 #define Rx_Stp_Int 0x01
   99 #define All_Int 0x0f
  100 #define RCV_BAR 4
  101 #define RCV_BAR_Lo 4
  102 #define RCV_BAR_Hi 5
  103 #define RCV_STOP_REG 6
  104 #define XMT_BAR 10
  105 #define HOST_ADDR_REG 12        /* 16-bit register */
  106 #define IO_PORT_REG 14  /* 16-bit register */
  107 
  108 /* Bank 1 specific registers. */
  109 
  110 #define TriST_INT 0x80
  111 #define INT_NO_REG 2
  112 #define RCV_LOWER_LIMIT_REG 8
  113 #define RCV_UPPER_LIMIT_REG 9
  114 #define XMT_LOWER_LIMIT_REG 10
  115 #define XMT_UPPER_LIMIT_REG 11
  116 
  117 /* Bank 2 specific registers. */
  118 
  119 #define Disc_Bad_Fr 0x80
  120 #define Tx_Chn_ErStp 0x40
  121 #define Tx_Chn_Int_Md 0x20
  122 #define No_SA_Ins 0x10
  123 #define RX_CRC_InMem 0x04
  124 #define BNC_bit 0x20
  125 #define TPE_bit 0x04
  126 #define I_ADDR_REG0 4
  127 #define EEPROM_REG 10
  128 #define Trnoff_Enable 0x10
  129 
  130 /* EEPROM memory positions (16-bit wide). */
  131 
  132 #define EE_W0                   0x00
  133 # define EE_W0_PNP              0x0001
  134 # define EE_W0_BUS16            0x0004
  135 # define EE_W0_FLASH_ADDR_MASK  0x0038
  136 # define EE_W0_FLASH_ADDR_SHIFT 3
  137 # define EE_W0_AUTO_IO          0x0040
  138 # define EE_W0_FLASH            0x0100
  139 # define EE_W0_AUTO_NEG         0x0200
  140 # define EE_W0_IO_MASK          0xFC00
  141 # define EE_W0_IO_SHIFT         10
  142 
  143 #define EE_IRQ_No 1
  144 #define IRQ_No_Mask 0x07
  145 
  146 #define EE_W1                   0x01
  147 # define EE_W1_INT_SEL          0x0007
  148 # define EE_W1_NO_LINK_INT      0x0008  /* Link Integrity Off           */
  149 # define EE_W1_NO_POLARITY      0x0010  /* Polarity Correction Off      */
  150 # define EE_W1_TPE_AUI          0x0020  /* 1 = TPE, 0 = AUI             */
  151 # define EE_W1_NO_JABBER_PREV   0x0040  /* Jabber prevention Off        */
  152 # define EE_W1_NO_AUTO_SELECT   0x0080  /* Auto Port Selection Off      */
  153 # define EE_W1_SMOUT            0x0100  /* SMout Pin Control 0= Input   */
  154 # define EE_W1_PROM             0x0200  /* Flash = 0, PROM = 1          */
  155 # define EE_W1_ALT_READY        0x2000  /* Alternate Ready, 0=normal    */
  156 # define EE_W1_FULL_DUPLEX      0x8000
  157 
  158 #define EE_W2                   0x02
  159 #define EE_W3                   0x03
  160 #define EE_W4                   0x04
  161 
  162 #define EE_Eth_Addr_Lo 2
  163 #define EE_Eth_Addr_Mid 3
  164 #define EE_Eth_Addr_Hi 4
  165 
  166 #define EE_W5                   0x05
  167 # define EE_W5_BNC_TPE          0x0001  /* 0 = TPE, 1 = BNC             */
  168 # define EE_W5_BOOT_IPX         0x0002
  169 # define EE_W5_BOOT_ODI         0x0004
  170 # define EE_W5_BOOT_NDIS        (EE_W5_BOOT_IPX|EE_W5_BOOT_ODI)
  171 # define EE_W5_NUM_CONN         0x0008  /* 0 = 2, 1 = 3                 */
  172 # define EE_W5_NOFLASH          0x0010  /* No flash socket present      */
  173 # define EE_W5_PORT_TPE         0x0020  /* TPE present                  */
  174 # define EE_W5_PORT_BNC         0x0040  /* BNC present                  */
  175 # define EE_W5_PORT_AUI         0x0080  /* AUI present                  */
  176 # define EE_W5_PWR_MGT          0x0100  /* Power Management             */
  177 # define EE_W5_CP               0x0200  /* COncurrent Processing        */
  178 
  179 #define EE_W6                   0x05
  180 # define EE_W6_STEP_MASK        0x000F
  181 # define EE_W6_BOARD_MASK       0xFFF0
  182 # define EE_W6_BOARD_SHIFT      4
  183 
  184 /* EEPROM serial interface. */
  185 
  186 #define EESK 0x01
  187 #define EECS 0x02
  188 #define EEDI 0x04
  189 #define EEDO 0x08
  190 #define EE_READ_CMD (6 << 6)
  191 
  192 /* Frame chain constants. */
  193 
  194 /* Transmit header length (in board's ring buffer). */
  195 #define XMT_HEADER_LEN 8
  196 #define XMT_Chain_Point 4
  197 #define XMT_Byte_Count 6
  198 #define Done_bit 0x0080
  199 #define Ch_bit 0x8000
  200 /* Transmit result bits. */
  201 #define No_Collisions_bits 0x000f
  202 #define TX_OK_bit 0x2000
  203 /* Receive result bits. */
  204 #define RCV_Done 8
  205 #define RCV_OK_bit 0x2000

Cache object: c3fc806a3db6fbfc0f957737e581bb26


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]


This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.