FreeBSD/Linux Kernel Cross Reference
sys/dev/hid/hid_if.m

     #-
     # Copyright (c) 2019 Vladimir Kondratyev
     #
     # Redistribution and use in source and binary forms, with or without
     # modification, are permitted provided that the following conditions
     # are met:
     # 1. Redistributions of source code must retain the above copyright
     #    notice, this list of conditions and the following disclaimer.
     # 2. Redistributions in binary form must reproduce the above copyright
    #    notice, this list of conditions and the following disclaimer in the
    #    documentation and/or other materials provided with the distribution.
    #
    # THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
    # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
    # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
    # ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
    # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
    # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
    # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
    # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
    # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
    # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
    # SUCH DAMAGE.
    #
    # $FreeBSD$
    #
    
    #include <sys/param.h>
    #include <sys/bus.h>
    #include <sys/kernel.h>
    #include <sys/malloc.h>
    #include <dev/hid/hid.h>
    
    # Any function listed here can do unbound sleeps waiting for IO to complete.
    
    INTERFACE hid;
    
    # Interrupts interface
    
    #
    # Allocate memory and initialise interrupt transfers.
    # intr callback function which is called if input data is available.
    # context is the private softc pointer, which will be used to callback.
    # rdesc is pointer to structire containing requested maximal sizes of input,
    # output and feature reports.  It is used by hardware transport drivers
    # to determine sizes of internal buffers.
    # This function returns zero upon success. A non-zero return value indicates
    # failure.
    #
    METHOD void intr_setup {
            device_t dev;
            hid_intr_t intr;
            void *context;
            struct hid_rdesc_info *rdesc;
    };
    
    #
    # Release all allocated resources associated with interrupt transfers.
    #
    METHOD void intr_unsetup {
            device_t dev;
    };
    
    #
    # Start the interrupt transfers if not already started.
    #
    METHOD int intr_start {
            device_t dev;
    };
    
    #
    # Stop the interrupt transfers if not already stopped.
    #
    METHOD int intr_stop {
            device_t dev;
    };
    
    #
    # The following function gets called from the HID keyboard driver
    # when the system has paniced.
    #
    METHOD void intr_poll {
            device_t dev;
    };
    
    # HID interface
    
    #
    # Read out an report descriptor from the HID device.
    #
    METHOD int get_rdesc {
            device_t dev;
            void *data;
            hid_size_t len;
    };
    
    #
    # Get input data from the device. Data should be read in chunks
    # of the size prescribed by the report descriptor.
   # This function interferes with interrupt transfers and should not be used.
   #
   METHOD int read {
           device_t dev;
           void *data;
           hid_size_t maxlen;
           hid_size_t *actlen;
   };
   
   #
   # Send data to the device. Data should be written in
   # chunks of the size prescribed by the report descriptor.
   #
   METHOD int write {
           device_t dev;
           const void *data;
           hid_size_t len;
   };
   
   #
   # Get a report from the device without waiting for data on the interrupt.
   # Copies a maximum of len bytes of the report data into the memory specified
   # by data. Upon return actlen is set to the number of bytes copied. The type
   # field indicates which report is requested. It should be HID_INPUT_REPORT,
   # HID_OUTPUT_REPORT, or HID_FEATURE_REPORT. This call may fail if the device
   # does not support this feature.
   #
   METHOD int get_report {
           device_t dev;
           void *data;
           hid_size_t maxlen;
           hid_size_t *actlen;
           uint8_t type;
           uint8_t id;
   };
   
   #
   # Set a report in the device. The type field indicates which report is to be
   # set. It should be HID_INPUT_REPORT, HID_OUTPUT_REPORT, or HID_FEATURE_REPORT.
   # The value of the report is specified by the data and the len fields.
   # This call may fail if the device does not support this feature.
   #
   METHOD int set_report {
           device_t dev;
           const void *data;
           hid_size_t len;
           uint8_t type;
           uint8_t id;
   };
   
   #
   # Set duration between input reports (in mSec).
   #
   METHOD int set_idle {
           device_t dev;
           uint16_t duration;
           uint8_t id;
   };
   
   #
   # Switch between the boot protocol and the report protocol (or vice versa).
   #
   METHOD int set_protocol {
           device_t dev;
           uint16_t protocol;
   };

Cache object: 7b41a265a1efb11603d8f6af3be7c869